Optical MSAN. For active and passive optical Ethernet

Transcription

1 Optical MSAN For active and passive optical Ethernet

2 Optical MSAN MileGate Fibre Series We have been very happy with the quality of KEYMILE products since the start of the optical-fibre expansion project. From the planning to the implementation phase, foundations were created to ensure everything went smoothly which we will be able to rely on for future projects. 2

3 Offer tomorrow s optical fibre services today Across the world optical fibre networks are growing just as fast as the quantity of data. Opt for growth and use the MileGate Fibre Series to provide ultra-high-speed broadband in FTTH/B networks efficiently. The MileGate Fibre Series is an innovative access platform which was especially developed for FTTH/B networks. The MileGate Fibre Series allows you to benefit from the familiar reliability and the exceptional durability of KEYMILE products. The MileGate Fibre Series also gives you exceptional flexibility when selecting the network topology. P2P and PON connections can be implemented via one single platform simultaneously. Highlights The line cards offer a high-bit-rate connection with 40 GbE uplinks for services requiring a lot of bandwith Top port density with up to 480 optical fibre connections in P2P networks and up to 160 GPON ports in PON networks with excellent access for maintenance First-class availability and a service life of over 50 years with excellent MTBF figures Compact design, low power consumption and extended temperature range for use in exchanges and outdoor cabinets with specification surpassing industry requirements Produced in Germany An excellent eco footprint due to environmentally friendly production and low power consumption Excellent compatibility with terminal equipment Ideal for corporate customer services with TLS and PLS in P2P networks Lab-tested EMC makes operation reliable 3

4 COGE4 For any FTTH/FTTB access topology FTTH/FTTB via active Point-to-Point Networks (P2P) MileGate Fibre Series in P2P networks enables the connection of long distances of up to 10 km via one single optical fibre or up to 80 km via dual-optical fibre at 100 Mbps or 1,000 Mbps. Subtending with MileGate 2012 P2P Business Services (TLS, PLS) MileGate Fibre Series COGE4 240 x 1 GbE TRIPLE PLAY Voice Internet Video 480 x 1 GbE 2 x 40 GbE 3 x 10 GbE Core Network P2P Residential Services (Triple Play) Transparent LAN Services (TLS) Provides VLAN transparent connections for business customers between separate locations Multipoint-to-multipoint User port to user port connections are feasible Transmission media independent Private Line Services (PLS) Point-to-point port to uplink port Layer 2 BPDUs (Bridged Protocoll Data Units) are tunneled 4

5 COGE4 Power Connect Power Connect Power Connect LAN WAN LAN WAN LAN WAN V V+ P P+ V V+ P P+ V V+ P P+ FTTH/FTTB via Passive Optical Networks (PONs) Used in PON networks, connection to a large number of end customers is possible via one access system by splitting the signal from one to up to 32 optical fibres. PON Residential Services with MDU (FTTB) MileGate Fibre Series COGE4 Passive optical Splitter 160 x 2.5Gbps Downstream 1.25 Gbps Upstream 160 x 2.5Gbps Downstream 1.25 Gbps Upstream 2 x 40 GbE 3 x 10 GbE Core Network Passive optical Splitter via G.fast VDSL2 n x VDSL2 MileGate 2012 VDSL2 VDSL2 VDSL2 Existing Coax in-house cabling PON Residential Services (FTTH) 5

6 Excellent prospects for any application By using different line cards and the central unit COGE4 for high levels of bandwidth, the MileGate Fibre Series can be adapted flexibly to different FTTH/FTTB types of applications and network structures. An ideal combination MileGate Fibre Series is based on open standards (ITU-T, Broadband Forum, IEEE) delivering superb compatibility with Optical Network Terminals (ONTs) ideally for FTTH deployments. In addition, the mini-dslam MileGate 2012 provides the ideal combination for a complete solution to address the needs of FTTB applications. Designed for maximum reliability MileGate Fibre Series ensures highest availability with central unit redundancy in hot-standby mode and enhanced MTBF values (50+ years) providing a lifespan higher than most competitive solutions. How you benefit Cost-efficiency due to best-in-class port density and low power consumption Flexibility for use in various network topologies Maximum reliability Enhanced temperature performance for indoor and outdoor use Fast and easy access when operating or carrying out maintenance 6

7 Technical Data Subrack MileGate Fibre Series 19 subrack for inserting service line cards 2 slots for central boards with redundancy Up to 20 slots for line cards Sizes and weights (WxDxH) from x x 177 mm, 4,450 g to x 286 x mm, 7,430 g Modular system architecture With/without front panel Local or central management (MCST/UNEM) Prepared for fan module (FANU4/6) COGE4 Central board for the MileGate Fibre Series with Ethernet switch for a wide range of FTTH/B applications Line card developed for Residential Services (Triple Play) ideal for high density areas Line card developed for Business Services (PLS, TLS) with Residential Service support (Triple Play) Line card developed for Residential Services (Triple Play) 2 optical 40 GbE uplink ports for QSFP+ modules Supports GPON network Supports P2P network Supports P2P network 3 optical 10 GbE uplink ports for SFP(+) modules Developed for Triple Play (broadband Internet, VoIP and IPTV) 12 SFP interfaces for optical/ active Ethernet (100/1,000 Mbps) SFPs usage allows selection of SFPs, exchangable, SFP types up to 80 km reach 24 csfp Ports with 100/1000 Base-BX10 (up to 10 km reach) 1:1 device protection for high levels of availability Ideal when a high number of subscribers are required 1:1 Double Tag, 1:1 Single Tag, Multicast, N:1, TLS, PLS, acc. to Broadband Forum TR-101 1:1 Double Tag, 1:1 Single Tag, Multicast, N:1, TLS, PLS, acc. to Broadband Forum TR GPON ports per card; splitting factor of up to 1:32 Prepared for IPv6 Prepared for IPv6 Up to 2.5 Gbps/1.25 Gbps downstream/upstream 1:1 Double Tag, 1:1 Single Tag, Multicast, N:1, TLS, PLS*, acc. to Broadband Forum TR-101 Low power consumption Very low power consumption with enhanced power saving mode Advanced power-saving function EMC, Safety, Powering and Operation Environment Nominal input voltage (min/max) 48/ 60 V DC ( 40.5 V DC 72 V DC) Humidity based on class 3.2, up to 95 %, non-condensing Electromagnetic compatibility EN 55022, class A Safety IEC/EN Operating temperature 25 C to +60 C (Note: When using QSFP+, operating temperature ranges from 25 C to +55 C) The MileGate Fibre Series is supports singlemode (SM) 9/125 µm fibres. The following fibre cables specified in G.652 and G.657 are possible for our application*: ITU-T G.652.D (IEC B1.3) ITU-T G.657.A1/A2 with possible 200 µm coating option (IEC B6a1/a2) ITU-T G.657.A2/B2/B3 (IEC B6a2/b2/b3) *Available on a future release **Note: For the fiber installation, the mechanic specifications of the used optical fibres need to be considered (e.g. bend radius) KEYMILE All rights reserved. Our products are subject to continuous development and we reserve the right to amend specifications without notice. 7

8 V004 With subsidiaries worldwide and a global network of partners, we serve customers in over 100 countries. For more information please visit KEYMILE GmbH Wohlenbergstrasse Hanover Germany Phone Fax info@keymile.com