Configuring CyberData Devices for use with a Zycoo CooVox V2 IP PBX

Transcription

1 Configuring CyberData Devices for use with a Zycoo CooVox V2 IP PBX - 1 -

2 Copyright Notice 2017,Zycoo Co,. Ltd. ALL RIGHTS RESERVED. This configuration guide and related materials are the copyrighted property of Zycoo Co., Ltd. No part of this configuration guide or related materials may be reproduced or transmitted, in any form or by any means (except for internal use by licensed customers), without prior express written permission of Zycoo. This configuration guide, and the products, software, firmware, and/or hardware described in this configuration guide are the property of Zycoo. provided under the terms of an agreement between Zycoo and recipient of this configuration guide, and their use is subject to that agreement and its terms. DISCLAIMER: Except as expressly and specifically stated in a written agreement executed by Zycoo, Zycoo makes no representation or warranty, express or implied, including any warranty or merchantability or fitness for any purpose, with respect to this configuration guide or the products, software, firmware, and/or hardware described herein, and Zycoo assumes no liability for damages or claims resulting from any use of this configuration guide or such products, software, firmware, and/or hardware. Zycoo reserves the right to make changes, without notice, to this configuration guide and to any such product, software, firmware, and/or hardware. TRADEMARK NOTICE: Zycoo is trademarks of Zycoo Co., Ltd. Other product names, trademarks, and service marks may be the trademarks or registered trademarks of their respective owners. Hardware Information Device Zycoo CooVox U20 V Zycoo CooVox U50 V Zycoo CooVox U60 V Zycoo CooVox U Zycoo CooVox U100 V CyberData Video Intercom CyberData Keypad Intercom CyberData Speaker CyberData Paging Server CyberData Paging Adapter CyberData Paging Amplifier CyberData RBG Strobe Firmware Version Testing Notes: Zycoo CooVox CooVox V2 IP PBX work well with the CyberData Devices. The PBX is very well rounded with many features to complement the functionality of CyberData Devices. The CooVox V2 IP PBX does not support a Session Refresh Timer so it may be worthwhile to use the Delay Termination feature of the CyberData device to prevent it from hanging on a call. There was a bug found with the CyberData video Intercom and - 2 -

3 Video Intercom with Keypad, when the feature Nightringer is being used. If a call is made to the Nightringer while the device is already in a call; the device will ring instead of sending a busy message. At the time of this guide there is no workaround for this issue. Configuring the PBX The CyberData Devices are very versatile SIP Endpoints devices that are ready to be used with Zycoo CooVox U2 out of the box. Figure 1: Creating an Extension - 3 -

4 Save the changes and Activate the changes. Figure 2: Activate Changes - 4 -

5 Creating an Extension 1. Please navigate to the section Basic from the side toolbar. 2. Then please go to the sub section Extensions. 3. Select New User. 4. Please give a name to the new extension to help identify it. 5. Set a password for the extension or use the randomly generated password. This password is used during registration. *Note* Password is obscured from screenshot for security purposes. 6. Uncheck the Enable box for Voic . 7. Uncheck the box for Call waiting. 8. Save the settings. Figure 3: Create a new user - 5 -

6 Figure 4: Save the new user - 6 -

7 Creating an Extension: Video Intercom Adding support for CyberData s line of video endpoints is just as easy a creating a regular SIP extension. Please use the following steps to setup an extension for the CyberData Video Intercom. 1. Press the button New User. 2. Give a name to the extension. 3. Set a password for the extension OR use the randomly generated password. 4. Uncheck the Enable box for Voic . 5. Uncheck the box for Call waiting. 6. Enable Video Calls and enable support for the H.264 video codec. 7. Save the extension. 8. Activate the changes. Figure 5: Creating a Video extension - 7 -

8 Configuring the CyberData Device CyberData products are ready to register with the Zycoo PBX out of the box and will simply need to be pointed to the server. To setup your CyberData device please use the following steps: 1. Navigate to the IP address of your CyberData device. 2. Login to the device using the default login info; username: admin and password: admin. 3. Once logged in please navigate to the SIP Tab. 4. Please set the IP address of the Zycoo PBX as the Primary SIP Server. 5. Please set the Primary SIP User ID and Primary SIP Auth. Id to the extension number. 6. Set the Primary SIP Auth. Password as the password that was set during extension creation. 7. Finally Save and then Reboot the device. Figure 6: SIP Page Configuration - 8 -

9 Resources CyberData Website CyberData VoIP Discovery tool Zycoo Website