HP 5130 EI Switch Series

Transcription

1 HP 5130 EI Switch Series Configuration Guides Index Part number: a Software version: Release 31xx Document version: 6W

2 Legal and notice information Copyright 2015 Hewlett-Packard Development Company, L.P. No part of this documentation may be reproduced or transmitted in any form or by any means without prior written consent of Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

3 Index This index covers all configuration guides for the HP 5130 EI Switch Series Configuratio product set. Use the table to match the code to the appropriate guide. Page numbers in the index are preceded by a matching code. For example, FM-12 indicates page 12 in the fundamentals configuration guide. Configuration guide HP 5130 EI Switch Series Fundamentals Configuration Guide-Release 31xx HP 5130 EI Switch Series IRF Configuration Guide-Release 31xx HP 5130 EI Switch Series Layer 2 LAN Switching Configuration Guide-Release 31xx HP 5130 EI Switch Series Layer 3 IP Services Configuration Guide-Release 31xx HP 5130 EI Switch Series Layer 3 IP Routing Configuration Guide-Release 31xx HP 5130 EI Switch Series IP Multicast Configuration Guide-Release 31xx HP 5130 EI Switch Series ACL and QoS Configuration Guide-Release 31xx HP 5130 EI Switch Series Security Configuration Guide-Release 31xx HP 5130 EI Switch Series High Availability Configuration Guide-Release 31xx HP 5130 EI Switch Series Network Management and Monitoring Configuration Guide-Release 31xx HP 5130 EI Switch Series OpenFlow Configuration Guide-Release 31xx Code FM IRF LSW IPSER IPR MCAST QACL SEC HA NM OF?? (CLI online help access), FM-2 1 1:1 VLAN mapping application scenario, LSW-212 configuration, LSW-218, LSW-225 implementation, LSW-214, LSW-215 1:2 VLAN mapping application scenario, LSW-214 configuration, LSW-223, LSW-230 implementation, LSW-214, LSW way DM CFD 1-way DM configuration, HA :2 VLAN mapping application scenario, LSW-214 configuration, LSW-224, LSW-230 implementation, LSW-214, LSW way DM 3 3DES CFD 2-way DM configuration, HA-24 security IPsec encryption algorithm, SEC Q-in-802.1Q. Use QinQ IGMP snooping message 802.1p priority, MCAST-26 Layer 2 LAN switching QinQ SVLAN tag 802.1p priority, LSW-205 Layer 2 LAN switching VLAN group configuration, LSW-136 MLD snooping 802.1p message priority, MCAST-72 1

4 802.1X QoS packet 802.1p priority, QACL-92 access control method, SEC-82 ACL assignment, SEC-78, SEC-96 architecture, SEC-62 authentication, SEC-66 authentication (access device initiated), SEC-65 authentication (client initiated), SEC-65 authentication configuration, SEC-91 authentication initiation, SEC-65 authentication request attempts max number, SEC-82 authentication timeout timers, SEC-83 authentication trigger feature, SEC-84 Auth-Fail VLAN, SEC-75, SEC-88 authorization VLAN, SEC-71 authorization VLAN assignment, SEC-93 basic configuration, SEC-91 configuration, SEC-71, SEC-79 controlled/uncontrolled port, SEC-62 critical VLAN, SEC-76, SEC-89 displaying, SEC-91 EAD assistant, SEC-98 EAD assistant configuration, SEC-90 EAD assistant feature, SEC-79 EAP over RADIUS, SEC-64 EAP packet format, SEC-63 EAP relay authentication, SEC-67 EAP relay enable, SEC-80 EAP relay termination, SEC-69 EAP relay/termination authentication, SEC-67 EAP termination enable, SEC-80 EAP-Message attribute, SEC-65 EAPOL packet format, SEC-64 enable, SEC-80 feature cooperation, SEC-78 guest VLAN, SEC-73, SEC-87 guest VLAN assignment, SEC-93 MAC authentication delay, SEC-108 MAC-based access control, SEC-71 maintaining, SEC-91 mandatory port authentication domain, SEC-85 online user handshake feature, SEC-83 online user handshake reply feature, SEC-84 overview, SEC-62 packet format, SEC-63 periodic online user reauthentication, SEC-86 port authorization state, SEC-81 port authorization status, SEC-62 port security authentication control mode, SEC-181 port security client macaddresselseuserloginsecure, SEC-197 port security client userloginwithoui, SEC-194 port security configuration, SEC-181, SEC-184, SEC-192 port security features, SEC-187 port security intrusion protection, SEC-187 port security MAC address autolearn, SEC-192 port security MAC move, SEC-190 port security MAC+802.1X authentication, SEC-184 port security mode, SEC-186 port security NTK, SEC-187 port users max number, SEC-82 port-based access control, SEC-71 quiet timer, SEC-86 RADIUS Message-Authentication attribute, SEC-65 RADIUS voice VLAN attribute, SEC-78 related protocols, SEC-63 security IP source guard dynamic binding entry, SEC-357 2

5 security user profile configuration, SEC-405 user profile assignment, SEC-78 VLAN manipulation, SEC X support 802.x A AAA RADIUS voice VLAN attribute, SEC LLDPDU TLV types, LSW LLDPDU TLV types, LSW-235 concurrent login user max, SEC-47 configuration, SEC-1, SEC-16, SEC-48 device implementation, SEC-11 display, SEC-48 displaying local users/user groups, SEC-22 FIPS compliance, SEC-16 HWTACACS accounting server, SEC-34 HWTACACS authentication server, SEC-33 HWTACACS authorization server, SEC-33 HWTACACS display, SEC-38 HWTACACS implementation, SEC-7 HWTACACS maintain, SEC-38 HWTACACS outgoing packet source IP address, SEC-35 HWTACACS scheme, SEC-32 HWTACACS scheme creation, SEC-32 HWTACACS server SSH user, SEC-48 HWTACACS shared keys, SEC-35 HWTACACS timers, SEC-36 HWTACACS traffic statistics units, SEC-35 HWTACACS username format, SEC-35 HWTACACS/RADIUS differences, SEC-7 ISP domain accounting method, SEC-45 ISP domain attribute configuration, SEC-42 ISP domain authentication method, SEC-43 ISP domain authorization method, SEC-44 ISP domain creation, SEC-42 ISP domain method, SEC-41 LDAP administrator attribute, SEC-39 LDAP authentication server, SEC-41 LDAP display, SEC-41 LDAP implementation, SEC-9 LDAP scheme, SEC-38 LDAP scheme creation, SEC-41 LDAP server creation, SEC-38 LDAP server IP address, SEC-39 LDAP server SSH user authentication, SEC-54 LDAP user attribute, SEC-40 LDAP versions, SEC-39 local user attribute, SEC-19 local user configuration, SEC-18 methods, SEC-12 NAS-ID profile configuration, SEC-47 protocols and standards, SEC-13 RADIUS accounting server parameters, SEC-24 RADIUS accounting-on configuration, SEC-30 RADIUS attributes, SEC-13 RADIUS authentication server, SEC-23 RADIUS display, SEC-32 RADIUS implementation, SEC-2 RADIUS maintain, SEC-32 RADIUS request transmission attempts max, SEC-26 RADIUS scheme, SEC-22 RADIUS scheme creation, SEC-23 RADIUS security policy server IP address, SEC-30 RADIUS server SSH user authentication+authorization, SEC-51 RADIUS server status, SEC-26 RADIUS session-control, SEC-46 RADIUS shared keys, SEC-25 3

6 RADIUS SNMP notification, SEC-31 RADIUS timers, SEC-29 RADIUS traffic statistics units, SEC-25 RADIUS username format, SEC-25 RBAC AAA authorization, FM-58 RBAC default user role, FM-63 RBAC local AAA authentication user configuration, FM-68 RBAC non-aaa authorization, FM-58 RBAC user role local AAA authentication, FM-64 RBAC user role non-aaa authentication, FM-64 RBAC user role remote AAA authentication, FM-63 scheme configuration, SEC-18 SSH user local authentication+hwtacacs authorization+radius accounting, SEC-49 troubleshoot HWTACACS, SEC-60 troubleshoot LDAP user authentication fails, SEC-60 troubleshoot RADIUS, SEC-59 troubleshoot RADIUS accounting error, SEC-60 troubleshoot RADIUS authentication failure, SEC-59 troubleshoot RADIUS packet delivery failure, SEC-59 user group attribute, SEC-21 user management by ISP domains, SEC-11 user management by user access types, SEC-11 abbreviating command, FM-4 absolute time range (ACL), QACL-84 access control NMM NTP access control rights configuration, NM-17 NMM NTP peer ACL, NM-12 NMM NTP query ACL, NM-12 NMM NTP security, NM-12 NMM NTP server ACL, NM-12 NMM NTP synchronization ACL, NM-12 NMM SNMP MIB, NM-69 NMM SNMP MIB role-based, NM-70 NMM SNMP MIB view-based, NM-70 portal authentication configuration, SEC-125 portal authentication cross-subnet configuration, SEC-154 portal authentication extended cross-subnet configuration, SEC-164 portal authentication extended direct configuration, SEC-157 portal authentication extended re-dhcp configuration, SEC-160 portal authentication re-dhcp configuration, SEC-151 portal authentication server detection+user synchronization, SEC-167 security portal authentication configuration, SEC-119, SEC-142 security portal authentication direct, SEC-142 security portal authentication direct local portal Web server, SEC-175 accessing CLI online help, FM-2 IRF fabric, IRF-21 Layer 2 LAN switching port-based VLAN assignment (access port), LSW-125 login management SNMP device access, FM-45 port-based VLAN access port (in interface view), LSW-126 port-based VLAN access port (in VLAN view), LSW-125 security portal authentication device access, SEC-120 account idle time (password control), SEC-205 accounting AAA configuration, SEC-1, SEC-16, SEC-48 AAA ISP domain accounting method, SEC-45 AAA RADIUS accounting-on, SEC-30 4

7 ACL AAA SSH user local authentication+hwtacacs authorization+radius accounting, SEC-49 login management command accounting, FM-53, FM-54 login management user access control, FM-46 advanced configuration, QACL-5 automatic rule numbering, QACL-3 automatic rule renumbering, QACL-3 basics configuration, QACL-4 categories, QACL-1 configuration, QACL-1, QACL-3, QACL-11 copying, QACL-8 displaying, QACL-10 displaying time range, QACL-84 Ethernet frame header configuration, QACL-8 IP multicast IGMP snooping policy configuration, MCAST-26 IP routing policy, IPR-93 IPv4 advanced configuration, QACL-5 IPv4 basic configuration, QACL-4 IPv6 advanced configuration, QACL-6 IPv6 basic configuration, QACL-4 IPv6 multicast MLD snooping policy, MCAST-73 login management command authorization, FM-50, FM-51 login management SNMP access control, FM-48, FM-50 login management SSH login control, FM-46 login management Telnet login control, FM-46, FM-47 login management user access control, FM-46 MAC authentication ACL assignment, SEC-105, SEC-116 maintaining, QACL-10 match order, QACL-2 naming, QACL-1 ACS NMM NTP peer ACL, NM-12 NMM NTP query ACL, NM-12 NMM NTP server ACL, NM-12 NMM NTP synchronization ACL, NM-12 numbering, QACL-1 packet filtering applicable scope (VLAN interface), QACL-9 packet filtering configuration, QACL-9 packet filtering default action, QACL-10 packet filtering interface application, QACL-9 packet filtering log interval, QACL-10 packet fragment filtering, QACL-3 rule numbering, QACL-3 rule numbering step, QACL-3 security 802.1X ACL assignment, SEC-78, SEC-96 security IPsec ACL, SEC-265 security IPsec ACL de-encapsulated packet check, SEC-274 security IPsec ACL rule keywords, SEC-265 security IPsec ACL-based implementation, SEC-263, SEC-264 security IPsec ACL-based tunnel establishment, SEC-264 security IPsec mirror image ACLs, SEC-266 security IPsec non-mirror image ACLs, SEC-266 security SSH management parameters, SEC-318 switch applications, QACL-1 time range configuration, QACL-84 attribute type, NM-203 attribute type (default)(cli), NM-204 attribute type (preferred), NM-203 authentication parameters, NM-205 autoconnect parameters, NM-206 connection interface, NM-205 HTTPS SSL client policy, NM-207 5

8 action provision code, NM-205 IP routing PBR node, IPR-51 loop detection block, LSW-114 loop detection no-learning protection, LSW-114 loop detection shutdown protection, LSW-114 OpenFlow table-miss flow entry default action, OF-12 activating OpenFlow instance, OF-12 activating RRPP domain, HA-61 active adding address FTP active (PORT) operating mode, FM-82 security ARP active acknowledgement, SEC-373 security portal authentication type, SEC-119 MAC address table blackhole entry, LSW-20 MAC address table multiport unicast entry, LSW-20 IP addressing configuration, IPSER-18 IP multicast, MCAST-5 IP multicast MLD query source IPv6 address (MLD snooping), MCAST-71 IP performance optimization ICMP packet source address, IPSER-114 IP services DHCP address assignment, IPSER-28 IP services DHCP address pool, IPSER-28 IP services DHCP address pool application on interface, IPSER-40 IP services DHCP address pool selection, IPSER-29 IP services DHCP allocation, IPSER-21 IP services DHCP BOOTP client address acquisition, IPSER-79 IP services DHCP client duplicated address detection, IPSER-62 IP services DHCP IP address allocation sequence, IPSER-30 IP services DHCP IP address conflict detection, IPSER-40 IP services DHCP lease extension, IPSER-22 IP services DHCP server address pool, IPSER-30 IP services DHCP server address pool creation, IPSER-31 IP services DHCP server address pool IP address range, IPSER-31 IP services DHCPv6 address allocation, IPSER-157 IP services DHCPv6 address pool, IPSER-157 IP services DHCPv6 address pool selection, IPSER-157 IP services DHCPv6 address/prefix assignment, IPSER-152 IP services DHCPv6 address/prefix lease renewal, IPSER-153 IP services DHCPv6 client IPv6 address acquisition, IPSER-174 IP services DHCPv6 IA, IPSER-156 IP services DHCPv6 IAID, IPSER-156 IP services DHCPv6 IPv6 address assignment, IPSER-155 IP services DHCPv6 IPv6 address/prefix allocation sequence, IPSER-158 IP services DHCPv6 multicast, IPSER-156 IP services DHCPv6 overview, IPSER-152 IP services DHCPv6 server dynamic IPv6 address assignment, IPSER-166 IP services DHCPv6 server IPv6 address assignment, IPSER-160 IP services IP address classes, IPSER-16 IP services IP addressing configuration, IPSER-16 IP services IP addressing interface address, IPSER-17 IP services special IP addresses, IPSER-17 IP services stateless DHCPv6, IPSER-154 IPv6 addresses, IPSER-122 6

9 IPv6 ICMPv6 packet source address, IPSER-144 MAC address learning disable, LSW-22 MAC address move notification, LSW-26 MAC address table address synchronization, LSW-25 MAC Information queue length, LSW-32 NMM ping address reachability determination, NM-1 SNMP notification for MAC address table, LSW-29 static source check disable, LSW-28 Address Resolution Protocol. Use ARP, Use ARP advanced ACL category, QACL-1 naming, QACL-1 numbering, QACL-1 advertising AES agent authorization VLANs through LLDP/CDP dynamically, LSW-178 high availability DLDP advertisement packet send interval, HA-37 high availability DLDP advertisement timer, HA-33 IP routing RIP default route, IPR-23 IP routing RIP on interface, IPR-20 IP routing RIPng default route, IPR-71 IP routing RIPv2 summary route, IPR-22 IRDP proxy-advertised IP address, IPSER-103 IRDP router advertisement (RA), IPSER-103 LAN switching LLDP advertisable TLV, LSW-243 security IPsec encryption algorithm, SEC-262 NMM sflow configuration, NM-177 NMM SNMP agent host notification, NM-78 aggregate CAR configuration, QACL-74, QACL-75, QACL-76 QoS global CAR, QACL-74 aggregating aging AH AIS alarm link. See Ethernet link aggregation LAN switching spanning tree max age timer, LSW-84 MAC address table timer, LSW-23 IPsec security protocol 51, SEC-260 CFD AIS configuration, HA-23 CFD functions, HA-16 high availability Ethernet OAM fault detection, HA-1 NMM RMON alarm function, NM-89 NMM RMON alarm function configuration, NM-93 NMM RMON alarm group sample type, NM-88 NMM RMON configuration, NM-86 NMM RMON Ethernet statistics group configuration, NM-91 NMM RMON group, NM-87 NMM RMON history group configuration, NM-92 NMM RMON private group, NM-87 alert protocol (SSL), SEC-351 algorithm LAN switching STP calculation, LSW-63 security IPsec authentication, SEC-262 security IPsec encryption (3DES), SEC-262 security IPsec encryption (AES), SEC-262 security IPsec encryption (DES), SEC-262 security IPsec IKE DH algorithm, SEC-292 security SSH negotiation, SEC-310 alias (command keyword), FM-5 7

10 allocating IP services DHCP address allocation, IPSER-28 IP services DHCP IP address allocation sequence, IPSER-30 IP services DHCP IP addresses allocation, IPSER-21 IP services DHCPv6 address/prefix allocation sequence, IPSER-158 IP services DHCPv6 dynamic address allocation, IPSER-157 IP services DHCPv6 dynamic prefix allocation, IPSER-157 IP services DHCPv6 static address allocation, IPSER-157 IP services DHCPv6 static prefix allocation, IPSER-157 alternate port (MST), LSW-73 anti-replay IPsec anti-replay window and sequence number synchronization, SEC-275 anti-replay (IPsec), SEC-274 any authentication (SSH), SEC-310 Anycast IPv6 address type, IPSER-123 IPv6 anycast address configuration, IPSER-133 Appendix A (Application restrictions), OF-19 Appendix A (Default priority maps), QACL-90 Appendix A (MAC-IP flow table), OF-22 Appendix A (Supported NETCONF operations), NM-263 Appendix B (Packet precedence), QACL-91 application ACL switch applications, QACL-1 high availability NQA+Track+static routing collaboration, HA-130 high availability Track+application module association, HA-133 high availability Track+application module collaboration, HA-130 high availability Track+policy-based routing association, HA-134 high availability Track+Smart Link association, HA-136 high availability Track+static routing association, HA-133 IP multicast data distribution, MCAST-4 IP multicast VPN, MCAST-12 IRF application scenario, IRF-1 IRF ARP MAD application scenario, IRF-10 IRF BFD MAD application scenario, IRF-9 IRF LACP MAD application scenario, IRF-8 IRF ND MAD application scenario, IRF-11 security IPsec application-based implementation, SEC-263 security IPsec application-based tunnel establishment, SEC-264 applying ACL packet filtering to interface, QACL-9 IP routing IPv6 PBR apply clause, IPR-84 IP routing PBR apply clause, IPR-49 IP routing policy apply clause, IPR-93, IPR-96 IP routing policy to IPv6 route redistribution, IPR-98 IP routing RIPng IPsec profile, IPR-74 IP services DHCP address pool on interface, IPSER-40 IP services DHCPv6 snooping trusted port, IPSER-181 IP services DHCPv6 snooping untrusted port, IPSER-181 NMM PoE profile, NM-224 NMM traffic mirroring QoS policy, NM-172 NMM traffic mirroring QoS policy (control plane), NM-173 NMM traffic mirroring QoS policy (global), NM-173 NMM traffic mirroring QoS policy (interface), NM-172 8

11 NMM traffic mirroring QoS policy (VLAN), NM-173 port security NAS-ID profile, SEC-191 QoS congestion avoidance queue-based WRED table, QACL-55, QACL-56 QoS data buffer configuration, QACL-89 QoS policy, QACL-20 QoS policy (control plane), QACL-22 QoS policy (global), QACL-21 QoS policy (user profile), QACL-23 QoS policy (VLAN), QACL-21 QoS policy to interface, QACL-21 security IPsec policy to interface, SEC-273 architecture archiving area IP multicast network, MCAST-5 NMM NTP, NM-9 security 802.1X, SEC-62 security PKI, SEC-226 configuration archive, FM-105 configuration archive parameters, FM-106 configuration archiving (automatic), FM-106 running configuration (manual), FM-107 data buffer shared-area queue ratio, QACL-88 QoS data buffer fixed area, QACL-86 QoS data buffer fixed-area max queue ratio, QACL-88 QoS data buffer shared area, QACL-86 QoS data buffer shared-area ratio, QACL-87 argument (CLI string/text type), FM-4 ARP ARP fast update enabling for MAC address move, LSW-27 attack protection. See ARP attack protection common proxy ARP configuration, IPSER-13 common proxy ARP enable, IPSER-12 configuration, IPSER-1, IPSER-7 configuration (multiport entry), IPSER-8 displaying, IPSER-6 displaying snooping, IPSER-15 dynamic entry aging timer configuration, IPSER-5 dynamic entry check enable, IPSER-6 dynamic entry max (device), IPSER-4 dynamic entry max (interface), IPSER-5 dynamic table entry, IPSER-2 gratuitous ARP configuration, IPSER-10 gratuitous ARP IP conflict notification, IPSER-11 gratuitous ARP packet learning, IPSER-10 gratuitous ARP periodic packet send, IPSER-10 local proxy ARP enable, IPSER-12 logging enable, IPSER-6 MAD. See ARP MAD maintaining, IPSER-6 maintaining snooping, IPSER-15 message format, IPSER-1 multiport entry configuration, IPSER-4 OpenFlow table entry, IPSER-3 operation, IPSER-1 proxy ARP configuration, IPSER-12 scanning configuration restrictions, SEC-381 security MFF configuration, SEC-385, SEC-387, SEC-389 security MFF manual-mode in ring network, SEC-390 security MFF manual-mode in tree network, SEC-389 snooping configuration, IPSER-15 static configuration, IPSER-7 static entry configuration, IPSER-3 static table entry, IPSER-2 table, IPSER-2 ARP attack protection 9

12 active acknowledgement, SEC-373 ARP detection logging enable, SEC-377 authorized ARP configuration, SEC-374 blackhole routing, SEC-368 configuration, SEC-367 detection configuration, SEC-374 displaying ARP detection, SEC-377 displaying unresolvable IP attack protection, SEC-369 filtering configuration, SEC-383 fixed ARP configuration, SEC-380 gateway protection, SEC-381, SEC-382 maintaining ARP detection, SEC-377 packet rate limit, SEC-370 packet source MAC consistency check, SEC-373 packet validity check configuration, SEC-375 restricted forwarding, SEC-376 restricted forwarding configuration, SEC-379 scanning configuration, SEC-380 source MAC-based attack detection, SEC-371, SEC-372 source MAC-based detection display, SEC-372 source suppression, SEC-368 unresolvable IP attack, SEC-367, SEC-369 user validity check, SEC-374 user+packet validity check, SEC-377 ARP detection Layer 2 LAN switching VLAN M:1 mapping (dynamic IP address assignment), LSW-219 security IP source guard static binding entry, SEC-356 ARP MAD IRF ARP MAD, IRF-10 IRF ARP MAD configuration, IRF-29, IRF-43 ARP snooping Layer 2 LAN switching VLAN M:1 mapping (static IP address assignment), LSW-221 ASCII transfer mode, FM-82 ASM IP multicast model), MCAST-5 assigning 802.1X user profile assignment, SEC-78 CLI user line assignment, FM-19 CWMP ACS attribute (preferred)(cli), NM-204 CWMP ACS attribute (preferred)(dhcp server), NM-203 IP services DHCP address, IPSER-28 IP services DHCPv6 address/prefix, IPSER-152 IP services DHCPv6 assignment (4 messages), IPSER-152 IP services DHCPv6 IPv6 address, IPSER-155 IP services DHCPv6 IPv6 prefix, IPSER-155 IP services DHCPv6 rapid assignment (2 messages), IPSER-152 IP services DHCPv6 server dynamic IPv6 address assignment, IPSER-166 IP services DHCPv6 server dynamic IPv6 prefix assignment, IPSER-164 IP services DHCPv6 server IPv6 address assignment, IPSER-160 IP services DHCPv6 server IPv6 prefix assignment, IPSER-158 IP services DHCPv6 server network parameters assignment, IPSER-161 IP services IP addressing interface address, IPSER-17 IPv6 interface addresses, IPSER-129 IPv6 multicast port-based VLAN user port, MCAST-97 IRF device member IDs, IRF-18 Layer 2 LAN switching port to isolation group (multiple), LSW-58 Layer 2 LAN switching port-based VLAN access port, LSW-125 Layer 2 LAN switching port-based VLAN hybrid port, LSW

13 Layer 2 LAN switching port-based VLAN trunk port, LSW-126 MAC authentication ACL, SEC-116 NMM port mirroring monitor port to remote probe VLAN, NM-163 port-based multicast VLAN user port, MCAST-51 port-based VLAN access port (in interface view), LSW-126 port-based VLAN access port (in VLAN view), LSW-125 RBAC local AAA authentication user role, FM-64 RBAC non-aaa authentication user role, FM-64 RBAC permission assignment, FM-56 RBAC remote AAA authentication user role, FM-63 RBAC user role, FM-63 RBAC user role assignment, FM-58 security 802.1X ACL assignment, SEC-78, SEC-96 voice VLAN assignment mode, LSW-171 assistant edge node RRPP type, HA-49 specifying RRPP, HA-60 associating high availability Track+application module, HA-133 high availability Track+BFD, HA-131 high availability Track+CFD, HA-132 high availability Track+detection modules, HA-131 high availability Track+interface management, HA-132 high availability Track+NQA, HA-131 high availability Track+policy-based routing, HA-134 high availability Track+Smart Link, HA-136 high availability Track+static routing, HA-133 NMM IPv6 NTP client/server association mode, NM-30 NMM IPv6 NTP multicast association mode, NM-38 NMM IPv6 NTP symmetric active/passive association mode, NM-32 NMM NTP association mode, NM-14 NMM NTP broadcast association mode, NM-10, NM-16, NM-33 NMM NTP broadcast association mode with authentication, NM-43 NMM NTP client/server association mode, NM-10, NM-14, NM-28 NMM NTP client/server association mode with authentication, NM-41 NMM NTP multicast association mode, NM-10, NM-16, NM-35 NMM NTP symmetric active/passive association mode, NM-10, NM-15, NM-31 OpenFlow instance with VLAN, OF-9 security IPsec SA, SEC-261 Smart Link associated device, HA-99 association high availability CFD maintenance association, HA-13 attack D&P configuration, SEC-411 login delay, SEC-412 TCP fragment attack prevention configuration, SEC-411 attack detection and prevention. See attack D&P attacking attribute detection and prevention. See attack D&P AAA HWTACACS scheme, SEC-32 AAA ISP domain attribute, SEC-42 AAA LDAP administrator attribute, SEC-39 AAA LDAP scheme, SEC-38 AAA LDAP user attribute, SEC-40 11

14 AAA local user, SEC-18 AAA local user attribute, SEC-19 AAA RADIUS, SEC-13 AAA RADIUS common standard attributes, SEC-13 AAA RADIUS extended attributes, SEC-6 AAA RADIUS HP proprietary attributes, SEC-15 AAA RADIUS Login-Service attribute check method, SEC-31 AAA RADIUS scheme, SEC-22 AAA scheme, SEC-18 AAA user group attribute, SEC-21 Ethernet link aggregation attribute configuration, LSW-36 port-based multicast VLAN user port attribute, MCAST-50 security 802.1X RADIUS EAP-Message, SEC-65 security 802.1X RADIUS Message-Authentication, SEC-65 authenticating AAA configuration, SEC-1, SEC-16, SEC-48 AAA ISP domain authentication method, SEC-43 AAA LDAP authentication, SEC-9 AAA LDAP server SSH user authentication, SEC-54 AAA RADIUS server SSH user authentication+authorization, SEC-51 AAA RADIUS user authentication methods, SEC-3 AAA SSH user local authentication+hwtacacs authorization+radius accounting, SEC-49 CWMP CPE ACS authentication parameters, NM-205 FTP basic server authentication, FM-83 high availability DLDP MD5 authentication, HA-38 high availability DLDP MD5 mode, HA-34 high availability DLDP non-authentication mode, HA-34 high availability DLDP password authentication, HA-38 high availability DLDP plaintext authentication, HA-38 high availability DLDP plaintext mode, HA-34 high availability DLDP simple authentication, HA-38 IP routing RIPng IPsec profile application, IPR-74 IP routing RIPv2 message authentication configuration, IPR-27 login management CLI console/aux none authentication, FM-21 login management CLI console/aux password authentication, FM-22 login management CLI console/aux scheme authentication, FM-23 login management CLI none authentication mode, FM-20 login management CLI password authentication mode, FM-20 login management CLI scheme authentication mode, FM-20 login management Telnet login none authentication, FM-26 login management Telnet login password authentication, FM-27 login management Telnet login scheme authentication, FM-28 MAC authentication, SEC-102, SEC-106, SEC-112 MAC authentication (local), SEC-112 MAC authentication (RADIUS-based), SEC-114 MAC authentication VLAN assignment, SEC-103 NMM NTP, NM-13 NMM NTP broadcast authentication, NM-22 NMM NTP broadcast mode with authentication, NM-43 12

15 NMM NTP client/server mode authentication, NM-18 NMM NTP client/server mode with authentication, NM-41 NMM NTP configuration, NM-18 NMM NTP multicast authentication, NM-23 NMM NTP security, NM-12 NMM NTP symmetric active/passive mode authentication, NM-19 NMM SNTP authentication, NM-48 periodic MAC reauthentication, SEC-105 port security authentication modes, SEC-181 port security client macaddresselseuserloginsecure, SEC-197 port security client userloginwithoui, SEC-194 port security configuration, SEC-181, SEC-184, SEC-192 port security MAC address autolearn, SEC-192 RBAC local AAA authentication user configuration, FM-68 RBAC RADIUS authentication user configuration, FM-70 RBAC temporary user role authorization (HWTACACS authentication), FM-73 RBAC temporary user role authorization (RADIUS authentication), FM-77 RBAC user role authentication, FM-67 RBAC user role local AAA authentication, FM-64 RBAC user role remote AAA authentication, FM-63 security 802.1X access device initiated authentication, SEC-65 security 802.1X authentication, SEC-66 security 802.1X authentication request attempts max number, SEC-82 security 802.1X authentication trigger feature, SEC-84 security 802.1X client-initiated, SEC-65 security 802.1X EAP over RADIUS, SEC-64 security 802.1X EAP relay authentication, SEC-67 security 802.1X EAP relay enable, SEC-80 security 802.1X EAP relay/termination, SEC-67 security 802.1X EAP termination, SEC-69 security 802.1X EAP termination enable, SEC-80 security 802.1X initiation, SEC-65 security 802.1X mandatory port authentication domain, SEC-85 security 802.1X periodic online user reauthentication, SEC-86 security 802.1X RADIUS Message-Authentication attribute, SEC-65 security 802.1X timeout timers, SEC-83 security 802.1X VLAN manipulation, SEC-71 security IPsec, SEC-262 security IPsec authentication algorithms, SEC-262 security IPsec Authentication Header. Use AH security IPsec configuration, SEC-259, SEC-281 security IPsec Encapsulating Security Payload. Use ESP security IPsec IKE (main mode/pre-shared key authentication), SEC-302 security IPsec IKE DSA signature authentication, SEC-291 security IPsec IKE pre-shared key authentication, SEC-291 security IPsec IKE RSA signature authentication, SEC-291 security IPsec RIPng, SEC-286 security IPsec tunnel for IPv4 packets (IKE-based), SEC-284 security IPsec tunnel for IPv4 packets (manual), SEC-281 security password control, SEC-205, SEC-210 security password control configuration, SEC-202 security portal authentication client, SEC-120 security portal authentication server, SEC

16 security SSH configuration, SEC-309 security SSH methods, SEC-310 security SSH SCP file transfer with password authentication, SEC-347 security SSH Secure Telnet client password authentication, SEC-335 security SSH Secure Telnet client publickey authentication, SEC-339 security SSH Secure Telnet server password authentication, SEC-327 security SSH Secure Telnet server publickey authentication, SEC-329 security SSH server configuration, SEC-312 security SSH SFTP client publickey authentication, SEC-343 security SSH SFTP server password authentication, SEC-341 security SSL services, SEC-351 security user profile configuration, SEC-405 authentication creating user profile, SEC-405 Authentication, Authorization, and Accounting. Use AAA Auth-Fail VLAN security 802.1X authentication, SEC-75 security 802.1X configuration, SEC-88 authorization VLAN MAC authentication, SEC-103 security 802.1X assignment, SEC-93 authorized ARP configuration, SEC-374 authorizing AAA configuration, SEC-1, SEC-16, SEC-48 AAA ISP domain authorization method, SEC-44 AAA LDAP authorization, SEC-9 AAA RADIUS server SSH user authentication+authorization, SEC-51 AAA RADIUS session-control, SEC-46 auto AAA SSH user local authentication+hwtacacs authorization+radius accounting, SEC-49 FTP basic server authorization, FM-83 login management command authorization, FM-50, FM-51 login management user access control, FM-46 MAC authentication authorization VLAN, SEC-103 port security authorization-fail-offline feature, SEC-192 port security server authorization information, SEC-190 RBAC temporary user role authorization, FM-65 security 802.1X authorization VLAN, SEC-71 security 802.1X port authorization state, SEC-81 security 802.1X port authorization status, SEC-62 security 802.1X port authorized-force state, SEC-81 security 802.1X port auto state, SEC-81 security 802.1X port unauthorized-force state, SEC-81 ACL automatic rule numbering, QACL-3 automatic configuration archiving, FM-106 configuration. See automatic configuration CWMP ACS autoconnect parameters, NM-206 FIPS mode (automatic reboot), SEC-395 FIPS mode entry (automatic reboot), SEC-400 FIPS mode exit (automatic reboot), SEC-397, SEC-403 high availability CFD MIP auto-generation rule, HA-20 interface auto power-down (Ethernet), LSW-5 IP routing RIPv2 automatic route summarization enable, IPR-22 IP services DHCP automatic address allocation, IPSER-21 14

17 IP services DHCP client auto-configuration file, IPSER-36 IP services DHCP snooping entry auto backup, IPSER-70 IPv6 interface link-local address automatic generation, IPSER-132 IPv6 link-local address automatic generation, IPSER-131 IPv6 ND stateless address autoconfiguration, IPSER-126 IPv6 stateless address autoconfiguration, IPSER-130 IRF software auto-update, IRF-24 loop detection port status auto recovery, LSW-115 port security MAC address autolearn, SEC-192 security PKI certificate request (automatic), SEC-232 automatic high availability DLDP automatic unidirectional link shutdown, HA-39 voice VLAN assignment mode, LSW-171 voice VLAN automatic assignment mode port operation configuration, LSW-174, LSW-179 automatic configuration DHCP server, FM-144 DNS server, FM-145 file preparation, FM-143 file server configuration, FM-143 gateway, FM-146 HTTP server+tcl script, FM-151 interface selection, FM-146 server-based, FM-142, FM-146 start, FM-146 TFTP server, FM-146 USB-based, FM-142 AutoMDIX mode (Ethernet interface), LSW-10 AUX console/aux common user line settings, FM-23 B console/aux none authentication, FM-21 console/aux password authentication, FM-22 console/aux scheme authentication, FM-23 login management CLI local console/aux port login, FM-21 login management overview, FM-14 backing up backup software image set, FM-113 IP routing route backup, IPR-2 IP services DHCP snooping entries, IPSER-70 LAN switching MST backup port, LSW-73 main next-startup configuration file, FM-108 Smart Link link backup, HA-94 bandwidth banner Ethernet link aggregate interface (expected bandwidth), LSW-46 QoS overview, QACL-14 QoS policy configuration, QACL-17 configuration, FM-125, FM-126 incoming type, FM-125 legal type, FM-125 login type, FM-125 MOTD type, FM-125 multiple-line input mode, FM-125 shell type, FM-125 single-line input mode, FM-125 basic ACL category, QACL-1 configuration, QACL-4 basic management LLDPDU TLV types, LSW-235 BAS-IP behavior portal authentication BAS-IP, SEC-137 QoS traffic behavior definition, QACL-19 15

18 best-effort QoS service model, QACL-14 BFD basic configuration, HA-125 configuration, HA-123 control packet mode configuration, HA-125 displaying, HA-128 echo packet mode configuration, HA-125 Ethernet link aggregation group BFD, LSW-46 high availability static routing+track+bfd collaboration, HA-141 high availability Track+BFD association, HA-131 IP routing IPv6 static route BFD configuration, IPR-57 IP routing IPv6 static route BFD control mode (direct next hop), IPR-58 IP routing IPv6 static route BFD control mode (indirect next hop), IPR-58 IP routing IPv6 static route BFD echo mode (single hop), IPR-58 IP routing IPv6 static routing BFD (direct next hop), IPR-61 IP routing IPv6 static routing BFD (indirect next hop), IPR-64 IP routing RIP BFD (bidirectional detection/control packet mode), IPR-44 IP routing RIP BFD (single-hop echo detection), IPR-39 IP routing RIP BFD (single-hop echo detection/specific destination), IPR-41 IP routing RIP BFD configuration, IPR-30 IP routing RIP BFD configuration (bidirectional control detection), IPR-31 IP routing RIP BFD configuration (single-hop echo detection/neighbor), IPR-30 IP routing RIP BFD configuration (single-hop echo detection/specific destination), IPR-31 IP routing static route BFD, IPR-6 IP routing static route BFD (direct next hop), IPR-10 IP routing static route BFD (indirect next hop), IPR-13 IP routing static route BFD bidirectional control mode (direct next hop), IPR-7 IP routing static route BFD bidirectional control mode (indirect next hop), IPR-7 IP routing static route BFD single-hop echo mode, IPR-7 MAD. See BFD MAD maintaining, HA-128 multi-hop detection, HA-123 protocols and standards, HA-124 session establishment, HA-123 session modes, HA-123 single-hop detection, HA-123 supported features, HA-124 template configuration, HA-127 BFD MAD BGP IRF BFD MAD, IRF-9 IRF BFD MAD configuration, IRF-28, IRF-38 high availability BFD supported, HA-124 bidirectional forwarding detection. Use BFD, Use BFD high availability DLDP port state, HA-33 IP routing IPv6 static route BFD control mode (direct next hop), IPR-58 IP routing IPv6 static route BFD control mode (indirect next hop), IPR-58 IP routing IPv6 static route BFD echo mode (single hop), IPR-58 IP routing RIP BFD (bidirectional detection/control packet mode), IPR-44 IP routing RIP BFD configuration (bidirectional control detection), IPR-31 IP routing static route BFD bidirectional control mode (direct next hop), IPR-7 IP routing static route BFD bidirectional control mode (indirect next hop), IPR-7 16

19 NMM port mirroring, NM-155 BIMS server information (DHCP client), IPSER-36 binary transfer mode, FM-82 binding IRF physical interface+port, IRF-19 security IPsec source interface to policy, SEC-276 blackhole entry MAC address table, LSW-18, LSW-20 blackhole routing (ARP), SEC-368 block action (loop detection), LSW-114 boot loader startup image file specification, FM-116 Boot ROM BOOTP Boot ROM image preload, FM-115 software image type, FM-112 software upgrade preparation, FM-115 startup image file specification, FM-116 system startup, FM-113 upgrade methods, FM-114 client configuration, IPSER-79 client dynamic IP address acquisition, IPSER-78 displaying client, IPSER-79 IP services client configuration, IPSER-78 IP services DHCP application, IPSER-78 IP services DHCP client address acquisition, IPSER-79 IP services DHCP server BOOTP request ignore, IPSER-41 IP services DHCP server BOOTP response format, IPSER-42 maintaining client, IPSER-79 protocols and standards, IPSER-78 Bootstrap Protocol. Use BOOTP boundary port (MST), LSW-73 BPDU bridge LAN switching MST region max hops, LSW-83 LAN switching spanning tree BPDU drop, LSW-104 LAN switching spanning tree BPDU guard, LSW-101 LAN switching spanning tree hello time, LSW-84 LAN switching spanning tree max age timer, LSW-84 LAN switching spanning tree TC-BPDU guard, LSW-104 LAN switching spanning tree TC-BPDU transmission restriction, LSW-103 LAN switching STP BPDU forwarding, LSW-68 LAN switching transmission rate configuration, LSW-86 LAN switching LLDP agent customer bridge, LSW-233 LAN switching LLDP agent nearest bridge, LSW-233 LAN switching LLDP agent non-tpmr bridge, LSW-233 bridging IRF bridge MAC persistence, IRF-23 LAN switching MST common root bridge, LSW-73 LAN switching MST regional root, LSW-72 LAN switching spanning tree loop guard, LSW-102 LAN switching spanning tree root bridge, LSW-81 LAN switching spanning tree root bridge (device), LSW-82 LAN switching spanning tree root guard, LSW-101 LAN switching spanning tree secondary root bridge (device), LSW-82 LAN switching STP designated bridge, LSW-62 LAN switching STP root bridge, LSW-62 broadcast 17

20 IP multicast transmission technique, MCAST-2 IP services DHCP server response broadcast, IPSER-41 NMM NTP association mode, NM-33 NMM NTP broadcast association mode, NM-10, NM-16, NM-22 NMM NTP broadcast association mode with authentication, NM-43 NMM NTP broadcast client configuration, NM-16 NMM NTP broadcast mode max number dynamic associations, NM-27 NMM NTP broadcast server configuration, NM-16 UDP helper configuration, IPSER-116, IPSER-118 UDP helper conversion (broadcast to multicast), IPSER-117 UDP helper conversion (broadcast to unicast), IPSER-116 UDP helper conversion conversion (broadcast to multicast), IPSER-119 UDP helper conversion conversion (broadcast to unicast), IPSER-118 broadcast (RRPP storm suppression mechanism), HA-52 buffer bulk data. See data buffer IP performance optimization TCP buffer size, IPSER-112 NMM information center log buffer, NM-58 interface configuration, LSW-15 interface configuration display, LSW-16 interface configuration restrictions, LSW-15 burst function (data buffer), QACL-87 C CA security PKI architecture, SEC-226 security PKI CA policy, SEC-226 cable security PKI certificate, SEC-225 security PKI certificate export, SEC-236 security PKI certificate obtain, SEC-233 security PKI certificate removal, SEC-237 security PKI certificate request, SEC-231 security PKI certificate request (automatic), SEC-232 security PKI certificate request (manual), SEC-232 security PKI certificate request abort, SEC-233 security PKI certificate verification, SEC-234 security PKI CRL, SEC-226 security PKI domain configuration, SEC-229 security PKI entity configuration, SEC-228 security PKI OpenCA server certificate request, SEC-245 security PKI RSA Keon CA server certificate request, SEC-239 security PKI storage path specification, SEC-236 security PKI Windows 2003 CA server certificate request, SEC-242 troubleshooting PKI CA certificate import failure, SEC-257 troubleshooting PKI CA certificate obtain failure, SEC-254 interface cable connection (Layer 2 Ethernet), LSW-11 calculating CAR file digest, FM-97 LAN switching MSTI calculation, LSW-75 LAN switching MSTP CIST calculation, LSW-74 LAN switching spanning tree port path cost calculation standard, LSW-87 LAN switching spanning tree timeout factor, LSW-85 LAN switching STP algorithm, LSW-63 aggregate CAR, QACL-74 18

21 aggregate CAR configuration, QACL-74, QACL-75 category CDP cell global CAR configuration, QACL-74 hierarchical CAR, QACL-74 hierarchical CAR configuration, QACL-75 QoS aggregate CAR configuration, QACL-76 QoS hierarchical CAR configuration, QACL-78 ACL advanced, QACL-1 ACL auto match order sort, QACL-2 ACL basic, QACL-1 ACL config match order sort, QACL-2 ACL Ethernet frame header, QACL-1 ACL user-defined, QACL-1 advertising authorization VLANs through LLDP dynamically, LSW-178 advertising voice VLAN information to IP phones, LSW-169 configuring LLDP/CDP to advertise a voice VLAN, LSW-177 LAN switching LLDP CDP compatibility, LSW-247 LAN switching LLDP CDP-compatible configuration, LSW-254 QoS data buffer, QACL-86 QoS data buffer burst function, QACL-87 QoS data buffer configuration, QACL-86 certificate CFD authority. Use CA revocation list. Use CRL security PKI certificate verification (CRL checking), SEC-235 security PKI certificate verification (without CRL checking), SEC way DM configuration, HA-23 2-way DM configuration, HA-24 AIS configuration, HA-23 AIS function, HA-16 basic concepts, HA-13 basic configuration, HA-19 configuration, HA-13, HA-18, HA-26 continuity check function, HA-16 continuity check on MEP, HA-21 displaying, HA-25 DM function, HA-17 EAIS configuration, HA-25 enabling, HA-19 Ethernet alarm indication signal (EAIS) function, HA-18 function configuration, HA-21 high availability Smart Link+Track+CFD collaboration, HA-144 high availability Track+CFD association, HA-132 linktrace function, HA-16 linktrace on MEP configuration, HA-22 LM configuration, HA-23 LM function, HA-17 loopback function, HA-16 loopback on MEP configuration, HA-22 maintenance association, HA-13 maintenance domain, HA-13 maintenance point, HA-14 MEP, HA-14 MEP configuration, HA-20 MEP list, HA-15 MIP, HA-14 MIP auto-generation rule, HA-20 protocols and standards, HA-18 service instance configuration, HA-19 TST configuration, HA-24 19

22 TST function, HA-17 change cipher spec protocol (SSL), SEC-351 changing channel file system current working directory, FM-98 FTP user account, FM-88 NMM NETCONF parameter value, NM-245 QoS priority mapping interface port priority, QACL-30 OpenFlow channel, OF-6 CHAP/PAP authentication direct/cross-subnet portal authentication process, SEC-123 checking re-dhcp portal authentication process, SEC-124 LAN switching spanning tree No Agreement Check, LSW-97, LSW-99 security IPsec ACL de-encapsulated packet check, SEC-274 security PKI certificate verification (CRL checking), SEC-235 security PKI certificate verification (without CRL checking), SEC-235 choosing Cisco CIST class Ethernet link aggregation reference port, LSW-37, LSW-39 LAN switching LLDP CDP compatibility, LSW-247 LAN switching LLDP configuration (CDP-compatible), LSW-254 calculation, LSW-74 network device connection, LSW-72 spanning tree max age timer, LSW-84 IP services IP address class, IPSER-16 classifying clearing CLI NMM port mirroring classification, NM-156 QoS class-based accounting, QACL-58, QACL-81, QACL-82 QoS traffic class definition, QACL-18 security IPsec QoS pre-classify enable, SEC-276 security IPsec packet DF bit clear, SEC-277 command abbreviation, FM-4 command entry, FM-3 command history function use, FM-7 command hotkey use, FM-5 command keyword alias configuration, FM-5 command keyword alias use, FM-5 command keyword hotkey configuration, FM-5 command line editing, FM-4 command redisplay, FM-6 command-line error message, FM-7 console port login procedure, FM-16 console/aux common user line settings, FM-23 console/aux none authentication, FM-21 console/aux password authentication, FM-22 console/aux scheme authentication, FM-23 device reboot (immediate), FM-127 device reboot (scheduled), FM-128 display command output filtering, FM-9 display command output line numbering, FM-9 display command output management, FM-13 display command output save to file, FM-12 display command output viewing, FM-13 displaying login, FM-37 emergency shell file system management, FM-119 emergency shell use, FM-119, FM-121 enter system view from user view, FM-2 IRF fabric access CLI login, IRF-21 20

23 client local console/aux port login, FM-21 login authentication modes, FM-20 login management overview, FM-14 login overview, FM-19 maintaining login, FM-37 NMM EAA configuration, NM-186, NM-194 NMM EAA monitor policy configuration, NM-190, NM-194 NMM EAA monitor policy configuration (CLI-defined with environment variables), NM-195 NMM NETCONF CLI operations, NM-258, NM-259 NMM NETCONF return to CLI, NM-262 online help access, FM-2 output control, FM-8 output control keys, FM-9 return to upper-level view from any view, FM-2 return to user view, FM-2 running configuration save, FM-13 software upgrade, FM-112 string/text type argument value, FM-4 undo command form, FM-3 use, FM-1 user lines, FM-19 user roles, FM-20 view hierarchy, FM-1 FTP client configuration (centralized IRF device), FM-90 IP services BOOTP configuration, IPSER-79 IP services DHCP BOOTP configuration, IPSER-78 IP services DHCP client auto-configuration file, IPSER-36 IP services DHCP client BIMS server information, IPSER-36 IP services DHCP client DNS server, IPSER-35 IP services DHCP client domain name suffix, IPSER-35 IP services DHCP client enable (interface), IPSER-61 IP services DHCP client gateway, IPSER-34 IP services DHCP client ID configuration (interface), IPSER-61 IP services DHCP client NetBIOS node type, IPSER-35 IP services DHCP client packet DSCP value, IPSER-62 IP services DHCP client WINS server, IPSER-35 IP services DHCP configuration, IPSER-61, IPSER-63 IP services DHCP duplicated address detection, IPSER-62 IP services DHCP server specification, IPSER-37 IP services DHCP snooping Option 82 support, IPSER-67 IP services DHCP voice client Option 184 parameters, IPSER-38 IP services DHCPv6 address pool, IPSER-157 IP services DHCPv6 client packet DSCP value, IPSER-175 IP services DHCPv6 configuration, IPSER-174, IPSER-176 IP services DHCPv6 IA, IPSER-156 IP services DHCPv6 IAID, IPSER-156 IP services DHCPv6 IPv6 address acquisition, IPSER-174 IP services DHCPv6 IPv6 address acquisition configuration, IPSER-176 IP services DHCPv6 IPv6 prefix acquisition, IPSER-175 IP services DHCPv6 IPv6 prefix acquisition configuration, IPSER-177 IP services DHCPv6 IPv6 prefix assignment, IPSER-155 IP services DHCPv6 relay agent configuration, IPSER-169, IPSER

24 IP services DHCPv6 stateless DHCPv6, IPSER-175 IP services DHCPv6 stateless DHCPv6 configuration, IPSER-179 IPv4 TFTP client configuration, FM-92 IPv6 TFTP client configuration, FM-93 NMM NQA client DHCP operation, NM-101 NMM NQA client DLSw operation, NM-112 NMM NQA client DNS operation, NM-102 NMM NQA client FTP operation, NM-102 NMM NQA client FTP template, NM-125 NMM NQA client history record save, NM-118 NMM NQA client HTTP operation, NM-103 NMM NQA client HTTP template, NM-123 NMM NQA client ICMP echo operation, NM-100 NMM NQA client ICMP template, NM-120 NMM NQA client operation scheduling, NM-119 NMM NQA client SNMP operation, NM-106 NMM NQA client statistics collection, NM-118 NMM NQA client TCP template, NM-121 NMM NQA client template, NM-119 NMM NQA client template optional parameters, NM-126 NMM NQA client threshold monitoring, NM-98, NM-115 NMM NQA client UDP echo operation, NM-107 NMM NQA client UDP jitter operation, NM-104 NMM NQA client voice operation, NM-110 NMM NQA client+track collaboration function, NM-114 NMM NQA collaboration configuration, NM-146 NMM NQA DHCP operation configuration, NM-128 NMM NQA DLSw operation configuration, NM-143 NMM NQA DNS operation configuration, NM-129 NMM NQA DNS template configuration, NM-150 NMM NQA enable, NM-99 NMM NQA FTP operation configuration, NM-131 NMM NQA FTP template configuration, NM-153 NMM NQA HTTP operation configuration, NM-132 NMM NQA HTTP template configuration, NM-152 NMM NQA ICMP echo operation configuration, NM-127 NMM NQA operation, NM-99 NMM NQA SNMP operation configuration, NM-136 NMM NQA TCP operation configuration, NM-137 NMM NQA TCP template configuration, NM-151 NMM NQA UDP echo operation configuration, NM-138 NMM NQA UDP jitter operation configuration, NM-133 NMM NQA voice operation configuration, NM-141 NMM NTP broadcast client configuration, NM-16 NMM NTP multicast client configuration, NM-16 NMM SNTP configuration, NM-47, NM-49 NQA client template (UDP), NM-122 NQA UDP tracert operation configuration, NM-139 security 802.1X authentication, SEC-66, SEC-91 security 802.1X authentication (access device initiated), SEC-65 security 802.1X authentication (client-initiated), SEC-65 22