L P Linn-Pumpen GmbH. Electric-gear-pumps series FKM
|
|
|
- Flora Priscilla Rice
- 6 years ago
- Views:
Transcription
1 Electric-gear-pumps series FKM Construction Self-priming electric-gear-pumps, bellhousing with foot-flange, pump-casing in cast iron. Gear-pumps series FKM with motor-power up to 1,5. Suction- and -ports Whitworth pipe threads - opposite 180. For FKM 5.. SAE-flange optionally. Applications Industrial applications, for example: Lubrication systems, coolant feed in machine tools, heat transfer, test bench and many more. Example of liquids suitable for transport Pure, non-explosive liquids, not corrosive against pump materials, without any solids. The liquids to deliver, must have lubricating characteristics. Oil, mineral oil, synthetic oil, adhesives, sealants, polymers, diesel, paints, inks and many more Operating conditions Liquid temperature: -20 C to +60 C (NBR) Ambient temperature from -20 C up to +40 C operating : max. 80 bar others on request Drive Standard: three-phase asynchronous motor Operation mode: Continuous operation S1 thermal class 155, protection IP 55 Optional: single-phase motor, DC-motors Materials components standard on request sectional drawing bearing cover bushes casing sealing ring casing and cover cast iron- EN-GJL (GG25) ductile cast iron (GGG40) shaft gears bearing bushes steel Steel, hardened and grinded composite bearings shaft seal sealing ring NBR FPM, PTFE, GLRD, packing gland right direction left direction suction screw O-Ring driven drive coupling mounting motor gear shaft bracket -standard- right/left direction suction suction
2 Electric-gear-pumps series FKM FKM 323 FKM 310 FKM 314 FKM 318 FKM 323 (bar) ,40 7,35 7,30 7,25 7,20 0, ,40 7,35 7,30 7,25 7,20 7,10 1,1 50 7,40 7,35 7,30 7,25 7,20 7,10 7,00 1,5 75 7,40 7,35 7,30 7,25 7,20 7,10 7,00 6,90 6,80 6, ,2 10,15 10,1 0, ,2 10,15 10,1 10,0 1, ,2 10,15 10,1 10,0 9,9 9,7 1, ,2 10,15 10,1 10,0 9,9 9,7 9, ,20 13,10 13,00 0, ,20 13,10 13,00 12,80 1, ,20 13,10 13,00 12,80 12,60 1, ,20 13,10 13,00 12,80 12,60 12, ,70 16,60 0, ,70 16,60 16,50 1, ,70 16,60 16,50 16,40 16,20 1, ,70 16,60 16,50 16,40 16,20 16,00 Oil-Speed: max. 1,5 m/s suction side, max. 4,5 m/s side FKM 310 FKM 314 FKM 318 FKM ,3 0, ,4 1, ,2 1, ,7
3 Electric-gear-pumps series FKM 328 bis FKM 333 FKM 328 FKM 333 (bar) ,30 20,20 0, ,30 20,20 20,10 1, ,30 20,20 20,10 20,00 1, ,30 20,20 20,10 20,00 19, ,10 24,00 0, ,10 24,00 1, ,10 24,00 23,90 1, ,10 24,00 23,90 23,80 Oil-Speed: max. 1,5 m/s suction side, max. 4,5 m/s side FKM 328 FKM ,3 0, ,4 1, ,2 1, ,7
4 Electric-gear-pumps series FKM 422 bis FKM 438 FKM 422 FKM 426 FKM 430 FKM 434 (bar) ,50 0, ,50 30,30 1, ,50 30,30 30,10 1, ,50 30,30 30, ,20 0, ,20 36,00 1, ,20 36,00 1, ,20 36,00 35, ,60 0, ,60 1,1 8 41,60 41,40 1, ,60 41,40 41, ,30 0, ,30 1,1 7 47,30 47,10 1, ,30 47, ,00 0, ,00 FKM 438 1,1 6 53,00 52,80 1,5 9 53,00 52,80 Oil-Speed: max. 1,5 m/s suction side, max. 4,5 m/s side FKM 422 FKM 426 FKM 430 FKM 434 FKM , ,1 1, ,9 1, ,4
5 Electric-gear-pumps series FKM 545 bis FKM 556 FKM 545 FKM ,70 0, ,70 1,1 6 62,70 62,50 1,5 8 62,70 62, ,10 0, ,10 1,1 5 78,10 1,5 7 78,10 77,90 (bar) Oil-Speed: max. 1,5 m/s suction side, max. 4,5 m/s side SAE Standard FKM 545 FKM ,1 0, ,2 1, ,0 1, ,5
6 Electric-gear-pumps series FKM 570 bis FKM 590 FKM 570 FKM 590 0, ,70 1,1 4 97,70 1,5 5 97,70 1, ,00 1, ,00 (bar) Oil-Speed: max. 1,5 m/s suction side, max. 4,5 m/s side SAE Standard FKM 570 FKM ,1 0, ,2 1, ,0 1, ,5
PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series 800 Vertical
SERIES 1300 Quality Design Features Assure Long, Trouble-Free Service
SERIES Quality Design Features Assure Long, Trouble-Free Service End Suction WIDE RANGE OF APPLICATIONS: Industrial Process Pollution Control General Pumping Spray Systems Deionized Water Waste Water Clear
Standard Circulating Pumps
Product review Range: 1 1 3Q [ m³/h] Hz - North America 1 3 1 1 1.x1 1.x x x3 x 1 1 Q [ US gpm] >Single-head pumps: Seal-less circulator with flanged connection. Two speed, manually adjustable to match
Screw-Type Flow Meter SVC
Screw-Type Flow Meter SVC Description Screw-type flow meters belong to the group of positive displacement flow meters. Two measuring spindles (pos. 2) with a screw-shaped profile engage with each other.
Customised Solutions. grundfos industry
Customised Solutions grundfos industry NBG/NKG PUMPS Mix and match to create the ideal for the job at hand 22 2 Motors Grundfos Blueflux technology represents the best from Grundfos within energy efficient
Screw-Type Flow Meter SVC
Screw-Type Flow Meter SVC Description Screw-type flow meters belong to the group of positive displacement flow meters. Two measuring spindles (pos. 2) with a screw-shaped profile engage with each other.
BARE SHAFT PUMPS AND MOTOR PUMPS
APPLICATIONS Air Conditioning Heating and ventilation Refrigeration Fire protection Plumbing Water Circulation Transfer and Irrigation Pressure Boosting Process Industries Water Treatment and Supply DESIGN
Standardised EN 733 centrifugal pumps
F Standardised EN 733 centrifugal pumps PERFORMANCE RANGE Flow rate up to l/min (3 m³/h) Head up to 9 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between - C and +9 C Ambient
HANKIA. DSV type. Single stage,vertical Axially split case double suction pump
DSV type Single stage,vertical Axially split case double suction pump High efficiency and low pulsation Wind performance range with up to 280m head Stable service and low maintenance Heavy duty design
RA /2.95. Gear Pump Model G2 (Series 4X) For Flange Mounting with SAE threaded Ports. Functional description. Symbols
/2.9 Gear Pump Model G2 (Series X For Flange Mounting with SE threaded Ports s to 22... 6 PSI (2 bar....7 in /rev. (22. cm /rev. /2.9 eplaces: 2.92 New principle of sealing the pump body, increases service
Asynchronous motors. 5/48 Permissible combinations of mechanical designs for 1PL6 motors,
Asynchronous motors 5 Asynchronous motors 5/2 Type overview and rated data 5/4 Technical definitions 5/4 Encoder systems 5/5 1PH7 motors 5/5 1PH7 motors, forced ventilation 5/32 Permissible combinations
Screw-Type Flow Meter SVC
Screw-Type Flow Meter SVC Description Screw-type flow meters belong to the group of positive displacement flow meters. Two measuring spindles (pos. 2) with a screw-shaped profile engage with each other.
CR, CRN high pressure
GRUNDFOS DATA BOOKLET CR, CRN high pressure Vertical multistage centrifugal pumps 5/6 Hz Contents Product Data Performance range 3 Product range 4 Applications 4 CRNE 1 and 3 HS 5 CRN 5, 1, 15, SF 6 x
1.7 Z 414-A LUG TYPE BUTTERFLY VALVE Z 414-A.
LUG TYPE BUTTERFLY VALVE -A TECHNICAL DATA Nominal diameter: da ( ) - da ( ) (SDR ) da ( ) - da ( ) (SDR (SDR / SDR, / SDR ) Face-to-face: EN 55 Series (DIN 32 T3 K1) ISO 5 Series API 09 Table 1 BS 55
Pipe fittings and flanges, sockets for bayonet locks
Data Sheet 909750 (909725) Page 1/7 Pipe fittings and flanges, sockets for bayonet locks for temperatures up to 600 C for different fitting lengths simple installation and replacement pressure-tight sealing
LCC Pump Series - Wear Resistant, High Performance Slurry Pumps
LCC Pump Series - Wear Resistant, High Performance Slurry Pumps 02 LCC Pump Series Solutions for the most Abrasive and Corrosive Slurry Applications With High Performance Wear Resistance, the GIW Minerals
TD End-Suction Pumps. Operating data Flow rates up to 300 l/sec Head up to 160 metres Temperature 20 0 C to C
TD End-Suction Pumps One of the broadest ranges of pumps available from any British manufacturer, with discharge sizes from mm to 0 mm. Widest choice of materials of construction and options to suit many
Standard Circulating Pumps
Product review Range: 1 1 3Q [ m³/h] Hz - North America 1 3 1 1 1.x1 1.x x x3 x 1 1 Q [ US gpm] >Single-head pumps: Circulating pumps with flanged connection > Applications: Drinking-water circulation
L P Linn-Pumpen GmbH. Submersible Vertical Electric pumps. SVI Series. with high efficiency PLM motors. SVI Series MARKET SECTORS INDUSTRIAL, CIVIL.
Submersible Vertical Electric pumps with high efficiency PLM motors MARKET SECTORS INDUSTRIAL, CIVIL. APPLICATIONS Pumping of coolants, lubrificants and condensate. Machine tools, welders, engine test
1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA
UG TYPE BUTTERFY VAVE Z 04-A ug type butterfly valve with threaded holes. This type enables the one-sided lugging of pipes. TECNICA DATA Nominal diameter: 00 ( only PN0/) Face-to-face: EN Series (DIN T
2CP. Centrifugal twin-impeller pumps
CP Centrifugal twin-impeller pumps Clean water Domestic use Civil use Industrial use PERFORMANCE RANGE Flow rate up to l/min (7 m³/h) Head up to m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid
1.4 F 012-A DOUBLE FLANGED BUTTERFLY VALVE F 012-A TECHNICAL DATA
DOUBE FANGED BUTTERFY VAVE F 01-A TS-version (through-going shaft) TECNICA DATA Nominal diameter: 0 1 Face-to-face: EN Series ISO Series API 0 Table C BS 1 short NF E -30.1 Flange accommodation: DIN 01
CR, CRN high pressure
GRUNDFOS PRODUCT GUIDE CR, CRN high pressure Vertical multistage centrifugal pumps 6 z Contents Mission 3 Product overview Performance range Product range 5 Applications 6 CRNE 1 and 3 S 7 CRN 5, 1, 15,
Data sheet: Wilo-Stratos 40/1-8
Data sheet: Wilo-Stratos 4/1-8 Pump curves 1 2 v 3 4 DN4 m/s,5 1, 1,5 2, 2,5 DN5 H/m Wilo-Stratos 4/1-8 p/kpa Wilo-Stratos 5/1-8 48 1 /min - 1 V 1~23 V - DN 4 / DN 5 8 8 P 1/W n= const 6 383 1 /min - 8
Submersible Pumps. Pumping Solution. 50 Hz
Submersible Pumps Pumping Solution 0 Hz INTRODUCTION Submersible bore well pumps for (DN 0 mm), (DN 0 mm), (DN 0 mm), (DN 00mm), (DN 0 mm) and (DN 00 mm) wells. Sized for connection to the motor according
Data sheet: Wilo-Stratos 50/1-9
Data sheet: Wilo-Stratos 5/1-9 Pump curves H/m 2 5 1 15 2 1 v 1 2 3 1 41 1 /min-1 V 8 3714 1 /min-9 V 3329 1 /min-8 V 6 4 57 1 /min-6 V 2 4 6 P 1/W n= const 4 8 V 2 H/m 2943 1 /min-7 V 2171 1 /min-5 V
Data sheet: Wilo-Stratos 50/1-10
Data sheet: Wilo-Stratos 5/1-1 Pump curves v,4,8 1,2 1,6 2, 2,4DN 4 m/s,4,8 1,2 DN 5 H/m p/kpa Wilo-Stratos 4/1-1 445 1 /min - 1 V Wilo-Stratos 5/1-1 1 1~23 V - DN 4, DN 5 8 P 1/W n= const 6 314 1 /min
Data sheet: Wilo-Stratos 30/1-8
Data sheet: Wilo-Stratos 3/1-8 Pump curves 7 337 1 /min - 9 V 6 34 1 /min - 8 V 5 271 4 1 /min - 7 V 239 1 /min - 6 V 3 26 1 /min - 5 V 2 173 1 /min - 4 V 14 1 1 /min - 3 V 2 4 6 8,5 1, 1,5 2, 2,5 Q/l/s
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE
Stainless Steel Submersible Pumps DATA BOOKLET. ISO 9001 Company. 60 Hz. Pumping Solution
Stainless Steel Submersible Pumps DATA BOOKET ISO Company Pumping Solution Hz Photographs of a few Manufacturing Units Contents Stainless steel submersible bore well pumps Product data Introduction Operating
Technical Specification _5.0. Concertor N/EA/DP
Technical Specification 886_. Concertor N/EA/DP Table of Contents Table of Contents System Description.... System overview..... Concertor N..... Concertor EA..... Concertor DP... Product Description...6.
FEATURES APPLICATIONS OPERATING DATA MATERIALS OF CONSTRUCTION. Flood control
APPLICATIONS FEATURES Flood control Irrigation Land drainage Pollution control Industry Water refineries Water parks Design OPERATING DATA Capacity:...up to.000 m/h Head:...up to m Max. water temperature:...0
Close-coupled centrifugal pumps
CombiBloc Close-coupled centrifugal pumps CombiBloc CombiBloc is the premier solution for pumping clean thin liquids in a very cost-effective way. The pump is part of Johnson Pump s Combi-system, a modular
Data is only for informational purpose. All specifications are subject to change without notice.
MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV
The most common variable when using linear drives is wheter the spindles are driven directly or via toothed-belt. Spindle 16 mm.
Linear drive The most common variable when using linear drives is wheter the spindles are driven directly or via toothed-belt. precise low friction robust economical Spindle 16 mm Ball screw spindle 16
ZMD ZMDV. AXIALLY SPLIT, ONE-STAGE, BETWEEN-BEARINGS PUMPS 50/60 Hz. High reliability and efficiency. Wide range of material options
AXIALLY SPLIT, ONE-STAGE, BETWEEN-BEARINGS PUMPS 0/ Hz ZMD ZMDV High reliability and efficiency Wide range of material options Excellent suction capability due to low NPSH Simple installation and maintenance
Product Overview. Product Overview. How To Order. Flange Input - Shaft Output Right Hand Output. Flange Input - Shaft Output.
Product Overview Product Overview Flange Input - Shaft Right Hand Flange Input - Shaft Double End Shaft Input - Shaft Left Hand How To Order 5:1-60:1 ratios sizes 1.33-3.25 One piece # Fc20 all cast iron
WAFER TYPE BUTTERFLY VALVE Z 011-A
WAFER TYPE BUTTERFY VAVE Z 0-A TECNICA DATA Nominal diameter: Face-to-face: EN Series (DIN 0 T3 ) ISO Series API 0 Table BS Series Flange accommodation: DIN PN // ANSI B., Class MSS SP Class AWWA C AS
WAFER PATTERN BUTTERFLY TYP Z 011-A
WAFER PATTERN BUTTERFY TYP Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter:
Type. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL DX SERIES SNOW PLOW FOR SERIES SNOW PLOWS SERIAL NUMBERS AFTER DX0000 00 Sno-Way International 0G TABLE OF CONTENTS Page HYDRAULIC SYSTEM (DX)... POWER PACK FRAME... 3 BLADES... LIFT
1.1 Z 011-A WAFER TYPE BUTTERFLY VALVE Z 011-A TECHNICAL DATA
WAFER TYPE BUTTERFY VAVE Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter: (
MPreC - Pressure Relief Device Order specification sheet
- Pressure Relief Device Order specification sheet -Series LARGE MESSKO PRESSURE RELIEF DEVICE Complete the Order-N o by choosing the specific add-on s: e.g.: LMPRD 685-08-22-N01-00 Order-N o : Parameter
RSK. Wafer Type Check Valve. Construction. Features. Advantages
Wafer Type Check Valve Construction The GEMÜ wafer type check valve is available in plastic or metal and the body, disc and seal can be chosen from various materials. The valve is clamped between two flanges
DIP. Spare parts list. Centrifugal pumps 25, 25-US, 35, 35-US, 65, 65-US Atlas Copco Construction Tools AB No c
DIP 5, 5US, 35, 35US, 65, 65US Spare parts list Centrifugal pumps 0 Atlas Copco Construction Tools AB No. 9800 5 0c 003 DIP 5, 5US, 35, 35US, 65, 65US Contents Contents General information................................................................
Balancing valve PN 16 and PN 25 DN
STAF, STAF-SG Balancing valve PN and PN DN 0-00 Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING ADVANTAGE A flanged, cast iron (STAF) and ductile iron (STAF-SG) balancing
More than safety. Precision Multiple Limit Switches
More than safety. Precision Multiple Limit Switches Automation More than safety. Emil Euchner, the company s founder and inventor of the multiple limit switch, circa 1928. Around the world the Swabian
Shaft Seal. Accessories
Type series booklet Hz.5/- G Standardized Pumps Fields of Application Water supply Sprinkling Irrigation Drainage Air-conditioning Drinking water Waste water Cooling water Fluid Pure liquids not chemically
4" MULTISTAGE CENTRIFUGAL SUBMERSED PUMPS COMPLETE WITH MOTOR
NOCCHI SCM 4 PLUS Maximum rigidity and resistance to water hammer, Strong resistance to the abrasive action of sand, Excellent hydraulic efficiency SCM 4 PLUS submersible pumps consist of a multi-stage
VESSEL FUEL MEASUREMENT & MANAGEMENT SYSTEM (VFMMS)
VESSEL FUEL MEASUREMENT & MANAGEMENT SYSTEM (VFMMS) Reference: - June 2012 Kral Fuel Flowmeters History: TECHNICAL APPROACH The Kral Flowmeter was developed over 20 years ago a solution to an internal
SUBMERSIBLE PUMPS SEWAGE RANGE
OPERATING LIMITS Flow rates up to: 00 m /h Head up to: 0 m CL Liquid temperature range: + to 0 C* Density of liquid:.0 max. ph of liquid: - Max. immersion depth: 0 m Max. particle size: Ø 0-0 mm ND discharge
shop online:
Process systems Liquid ring vacuum pumps Single stage pumps 8 Alpha series single stage liquid ring vacuum pumps 9 AL series single stage liquid ring vacuum pumps 97 Two stage pumps 00 SHR series liquid
Thermal oil. Hot Water Pumps
Type Series Booklet and 0 Hz.5/03-EN G Etanorm SYT/Etanorm-RSY Thermal Oil / Hot Water Pumps Automation products available: PumpExpert Hyamaster hyatronic Fields of Application Etanorm SYT/Etanorm-RSY
JVMG* *NSF 61/Annex G Certification and Compliance with State Codes does not apply to JVMG Models
JVM, JVML SERIES Stainless Steel Construction Closed multi-stage impeller Flow: 4 to 38 GPM Head: to 82 ft. Range of HP: to HP Applications: Commercial booster system, Boiler feed, Jockey, Water Purification,
Compact Bellows Pumps
Compact Bellows Pumps Compact Bellows Metering Pumps were specifically designed for metering applications requiring low discharge pressures. Compact pumps have been successfully applied in photo, X-ray
PRESSURE RELIEF DEVICE ORDERING SPECIFICATIONS.
MESSKO MPreC PRESSURE RELIEF DEVICE ORDERING SPECIFICATIONS. MESSKO MPreC -Series LARGE MESSKO PRESSURE RELIEF DEVICE (LMPRD) Operating pressure Project/Reference: Gasket material MPreC Typ 4 psi; 0.28
Electromechanical pressure switches
Presentation Electromechanical pressure switches For control circuits, types ACW and ADW Presentation Pressure switches type ACW and ADW are switches for control circuits, with an adjustable differential.
Limit switch attachments
Limit switch attachments Type codes SRBF SRBF CA3 YR90 MW 22A C2M20 Type SRBF Limit switch attachment Design C Sensor box Mechanical interface A3 A4 A5 A6 Mounting adapter, hole pattern 30x80 mm, for drives
USER MANUAL. Electrical Part-turn Valve Actuators. Rev 5.3 / March 2018 EQS ID 1193 QT 250 and QT Ex Actuator
USER MANUAL Electrical Part-turn Valve Actuators Rev 5.3 / March 2018 EQS ID 1193 QT 250 and QT800 2.4 Ex Actuator Revision 5.3 Page 1 of 26 TABLE OF CONTENTS 1 INTRODUCTION... 3 1.1 VALVE INTERFACE...
PACO PUMPS PACO INACTIVE MODELS DRY PIT NON-CLOG REPLACEMENT PARTS GUIDE TYPES NCF, NCP, NCH, NCVU & NCU WITH 5-DIGIT MODEL NUMBERS. D2b.
PACO INACTIVE MODELS DRY PIT NON-CLOG REPLACEMENT PARTS GUIDE TYPES NCF, NCP, NCH, NCVU & NCU WITH 5-DIGIT MODEL NUMBERS PACO CAT#: STOCK#: SER#: PACO GPM: TDH: IMP. DIA. 34014412 While PACO Dry Pit Non-Clog
Level sensor Stainless steel version Model RLT-1000, for industrial applications
Level measurement Level sensor Stainless steel version Model RLT-1000, for industrial applications WIKA data sheet LM 50.02 Applications Level measurement of liquids in machine building Control and monitoring
Series 100. Mechanical Switches Contents. Series 100 Multiple Position Switches
Contents Series 00 Multiple Position Switches Full size housing Full size switch elements DIN 43697 Up to 2 positions IO-Link Quick change plunger block Inductive Inductive with extended range 2 or 6 mm
2-PORT SEAT VALVES PN16 WITH FLANGED CONNECTIONS STAZ-16, STBZ-16, STCZ-52 DATASHEET
-PORT SEAT VALVES PN WITH FLANGED CONNECTIONS STAZ-, STBZ-, STCZ- DATASHEET In boiler, district heating and refrigeration plants, cooling towers, heating groups, in ventilation and air-handling units as
Metal Debris Sensor Manual. Index. 1. Brief Introduction. 2. Main Technical Parameters
Metal Debris Sensor Manual YHY1-1 Series Index 1. Brief Introduction 2. Main Technical Parameters 3. Sensor Installation 3.1 Mechanical Installation 3.2 Electrical Connection 4. Wiring & Configuration
21023, 21025, 2/2 Direct solenoid actuated poppet valves
03, 05, / > > Port size: G/4, G/ > > Working from 0 bar up > > Suitable for mediumhigh vacuum down to.33 0 - mbar l/s > > Compact design > > Valves and solenoids are ATEX approved. Additional international
Lenntech BMP GRUNDFOS DATA BOOKLET. High-pressure piston pumps 50/60 Hz
Lenntech GRUNDFOS DATA BOOKLET BMP High-pressure piston pumps 50/60 Hz Contents Product data Introduction Page 3 Features and benefits Page 3 Applications Page 3 Pumped liquids Page 3 key Page 4 Motor
This is trial version
s, s, Ejector coupling devices, Unscrewing components, Two-stage ejectors, Latch locking units, Mould slides-modular system 2.01 2.02 Ordering example : Z 40 / 1,6 x 40 Shaft Overall length Z02/... 2.1
Ball Screw Actuator Models Advantages:
Ball Screw Actuator Models Advantages:! Move loads and apply force more efficiently than other mechanical actuators.! Permit faster operation and longer life under load.! Require less power by providing
Mechanical accessories
Bearing box Part no. 01209010, 01209029 Part no. 01209010 01209029 Shaft size Ø 15 mm Ø 10 mm Shaft load max Radial: 250 N, Axial: 150 N Speed max 4000 rpm Protection class IP 64 according to IEC 60529
robust advanced technology Accessories » for mobile and stationary Ringler suction systems
www.ringler-gmbh.de robust advanced technology Accessories» for mobile and stationary Ringler suction systems Valid from 01.01.2013 Information Dear Customer, This catalog gives you an important selection
AB13F DOUBLE FLANGED BUTTERFLY VALVES DN50 - DN2000 FEATURES TECHNICAL DATA OPTIONS ACCORDING TO
Quality BF LEVER OPERTED GERBOX OPERTED FETURES Designed and manufactured to S79. Vulcanized liner resists deformation. Rated to 00kpa from 0mm up to 00mm and 000kpa from 700mm up to 00mm. Stainless steel
Model Number: 4212-PK-045Sensor Connections* SHIELD Silver/clear wire DEBRIS MEASURE RED DEBRIS REF BLUE OIL SIGNAL GREEN OIL REF WHITE TEMP ORANGE PROBE GND BLACK Wire 26 AWG PTFE 3G210 screened with
Lenntech GRUNDFOS DATA BOOKLET. CME 10. Horizontal, multistage centrifugal pumps 50/60 Hz
Lenntech info@lenntech.com www.lenntech.com GRUNDFOS DATA BOOKLET CME 1 Horizontal, multistage centrifugal pumps 5/6 Hz General description CME Stainless-steel version Fig. 2 Grundfos CME pumps Cast-iron
Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 NPT
1/4 to 2 NPT Features Direct mount ISO5211 Full Port 316 stainless steel ball valve 1000 PSI working pressure at 100 F (38 C) Highly visual dome style valve position indicator Rugged aluminum Type 4X weatherproof
SUBMERSIBLE VERTICAL ELECTRIC PUMPS SVI SERIES
SUBMERSIBLE VERTICAL ELECTRIC PUMPS SVI SERIES EDIZIONE 09-99 ISO 9001 (UNI - EN 29001) Lowara has obtained top level Quality System certification for the following production plants: Montecchio Maggiore
Multiple Limit Switches, Trip Rails and Trip Dogs
EN DE Multiple Limit Switches, Trip Rails and Trip Dogs Internationally successful the EUCHNER company Headquarters in Leinfelden-Echterdingen EUCHNER GmbH + Co. KG is a world-leading company in the area
The HELLE Log Turner
The HELLE Log Turner Equipment may vary from what is pictured. PARTS MANUAL HELLE Sawmill Equipment Mfg. by Sawmill Hydraulics, Inc. 1-800-245-2448 www.4helle.com 1 HYDRAULIC DRIVE MOTOR SPROCKET PART
Electrical Rotary Drive
Stellantriebe Electrical Rotary Drive www.arisactuators.com Synchronous motor technology (AC) or direct current motor () The permanent magnets built into the synchronous motor ensure a high holding torque
Safety Instructions Cerabar S PMP71, PMP75
/00/EN/01.14 71249311 Products Solutions Services Safety Instructions PMP71, PMP75 4-20 ma HART, PROFIBUS PA, FOUNDATION Fieldbus Ex d IIC T* Gb TÜV 13.0902X Segurança TÜV INMETRO OCP 0004 Document: Safety
Model. MITSUBISHI Industrial Sewing Machine Parts Catalog ( ( ( ( ( 170 INDEX Page. From the library of: Superior Sewing Machine & Supply LLC
( ( ( ( ( MITSUBISHI Industrial Sewing Machine Parts Catalog Model 170 INDEX Page 1. Arm bed & its accessories 1 2. Thread take-up lever & needle bar mechanism 5 3. Arm shaft & vertical shaft mechanism
General Purpose - TEFC. Poultry Fan - TEAO. Auger Drive - TEFC
WEG offers a complete line of TEFC Farm Duty motors providing high starting torque for the most demanding applications. Standard features such as v-rings provide versatility for indoor and outdoor applications.
Electromotoric actuators Torques up to 60 Nm Running times ¹) s. ¹) Predefined by the basic unit (LMV5...)
7 818 Actuators SQM9... Electromotoric actuators Torques up to 60 Nm Running times ¹) 30...120 s ¹) Predefined by the basic unit (LMV5...) The SQM9... and this Data Sheet are intended for use by OEMs which
FxM. ISO7/1 thread, EN331 standard PN40~PN25(5MOP/20MOP) Size:1/4 ~2
BA VAVE - EVER ANDE F/F Model: E0 Advantica british gas, wras, en approved ball valves yellow stainless steel lever handle; FxF ISO/ thread, EN standard PN0~PN(MOP/0MOP) Size:/ ~ According to EN standard.
Installation Instructions and techn. Documentation
Installation Instructions and techn. Documentation Tank-Spion Digital LX-2 / LX-2-R / LX-Q LX-2 Tank monitoring device with level meas. probe. LX-2-R With additional relay control functions. LX-Q With
YANMAR N18 AUX.ENGINE SPARES
YANMAR N18 AUX.ENGINE SPARES Contact: A.H. Global Impex Piston recondition 6 pcs Main Bearing 146673-02351 12 PAIR C.R Bearing 146673-22380 11 PAIR Piston Ring Oil 146676-22180 17 Pcs Piston Rind TOP 146673-22950
with extraction and return pipe
Float switch with extraction and return pipe 351 TEG + Intake and extraction pipes and reliable measurement + Long lifetime due to contact-free reed technology + No calibration necessary + Switching points
Positioning Systems Linear Module
Positioning Systems Linear Module CRD Devices Ltd All Saints Industrial Estate, Shildon, Co, Durham, DL4 2RD Tel: +44 (0)1388 778400 Fax: +44 (0)1388 778800 E: sales@crd-devices.co.uk W: www.crd-devices.co.uk
BC 35 DOUBLE-CHANNEL. Submersible pumps. PERFORMANCE RANGE Flow rate up to 1900 l/min (114 m3/h) Head up to 31 m
BC 5 Suersile pups DOUBLE-CHANNEL Sewage water Civil use Industrial use PERFORMANCE RANGE Flow rate up to 900 ( /h) Head up to APPLICATION LIMITS 0 axiu iersion depth (with a sufficiently long power cale)
Standard Bellows Metering Pumps
Standard Bellows Metering Pumps Bellows Metering Pumps operate on a positive displacement principle. Pumps are designed to displace both corrosive and noncorrosive fluids. Accurate to ± 0.5% from stroke
Mechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems
Well Probe Mechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems The switch can be used to detect the water level within a well. When the water level in the
"PVL" SERIES. Fixed Displacement - Single PVL1. Up to 5 MPa (730 PSI), 10.6 cm /rev (.647 CU.IN./rev)
"PVL" SERIES Fixed Displacement - Single PVL Up to 5 (70 ), cm /rev (7 CU.IN./rev) Pub. EC-0 The PVL series single pumps are designed for use with small size machine tools requiring comparatively low pressure
Frame, End Brackets, & Conduit Box With Heavy Gauge Steel Fanguard and Non-sparking Fan, for Severe
W Series 143T-447T - TEFC Heavy Duty Construction Frame, End Brackets, & Conduit Box With Heavy Gauge Steel Fanguard and Non-sparking Fan, for Severe Single Phase 56/56C : RF - Removable Feet TM - Thermistors
Multi-axial miniature joystick based on Hall Effect technology
Joystick with grip Multi-axial miniature joystick based on Hall Effect technology J... + space-saving design + highly reliable and long lifetime due to contactless Hall Effect technology + integrated third
Robots. KUKA Roboter GmbH KR 360 FORTEC. With F and C Variants Specification. Issued: Version: Spez KR 360 FORTEC V2
Robots KUKA Roboter GmbH KR 360 FORTEC With F and C Variants Specification Issued: 16.04.2014 Version: Spez KR 360 FORTEC V2 Copyright 2014 KUKA Laboratories GmbH Zugspitzstraße 140 D-86165 Augsburg Germany
SOLAR WATER PUMP KIT MODEL: SIS-25HP
SOLAR WATER PUMP KIT MODEL: SIS-25HP Model: SIS -25HP Pump Size: 6 Capacity in HP: 25 PV Size in kw: 25 Water head range 41-133 meter Water quantity range 20000-78000 liter per hour Quantity Description
PN Gold Mounted Ball Bearings
PN Gold Mounted Ball Bearings PN Gold with high strength reinforced composite housing PN Gold with 1 passivated stainless steel housing PN Gold Extended Bearing Life for Highly Corrosive Environments Reinforcing
Pilot operated 2 port solenoid valve (general purpose valve) 100 VAC 50/60Hz 110 VAC 60Hz 200 VAC 50/60Hz 220 VAC 60Hz 12 VDC 24 VDC 48 VDC 100 VDC
D11/D1 Series (general purpose valve) D11/D1 Series NC (normally closed) type, NO (normally open) type Port size: Rc1/4 to Rc1 Diaphragm structure Refer to Ending 17 for more details. JIS symbol Common
ACCESSORIES. Setscrew Ball Bearings LUBRICANTS AIR HANDLING SEALS HOUSING MATERIAL HIGH TEMPERATURE OTHER MODIFICATIONS
Setscrew Ball Bearings LUBRICANTS DODGE ball bearings are factory lubricated with a lithium complex base lubricant. For applications where extreme ambient temperatures or speeds are anticipated or environmental
COBRA. Spare parts list. Petrol drills and breakers COMBI Atlas Copco Construction Tools AB No c
COBRA COMBI Spare parts list Petrol drills and breakers 0 Atlas Copco Construction Tools AB 00 0 0c 00 COBRA COMBI Contents Contents General information................................................................
Axially Split Volute Casing Pump RDLO / RDLO V. Type Series Booklet
xially Split Volute Casing Pump RDLO / RDLO V Type Series ooklet Legal information/copyright Type Series ooklet RDLO / RDLO V ll rights reserved. The contents provided herein must neither be distributed,