CISCO CATALYST 6500 SERIES 10- AND 100-MBPS ETHERNET FIBER-BASED INTERFACE MODULES

Size: px

Start display at page:

Download "CISCO CATALYST 6500 SERIES 10- AND 100-MBPS ETHERNET FIBER-BASED INTERFACE MODULES"

Clara Peters
6 years ago
Views:

DATA SHEET CISCO CATALYST 6500 SERIES 10- AND 100-MBPS ETHERNET FIBER-BASED INTERFACE MODULES As the premier Cisco modular multilayer switch, the Cisco Catalyst 6500 Series delivers secure, converged

1 DATA SHEET CISCO CATALYST 6500 SERIES 10- AND 100-MBPS ETHERNET FIBER-BASED INTERFACE MODULES As the premier Cisco modular multilayer switch, the Cisco Catalyst 6500 Series delivers secure, converged services from the LAN access to the core, to the data center, and to the WAN edge. PRODUCT OVERVIEW The Cisco Catalyst 6500 Series provides the broadest selection of 10- and 100-Mbps media, densities, interoperability, and chassis deployment options (refer to Table 1). The 100BASE-X, 100BASE-FX, and 10BASE-FL modules provide another alternative for the access and distribution layer and metropolitan (metro) access deployments. The 100BASE-X module offers customers flexibility to mix and match different optics, and maximize their investment protection by allowing pay-as-you-grow through support of modular, Small Form-Factor Pluggable (SFP) optics. Cisco Catalyst BASE-FL, 100BASE-FX, and 100BASE-X modules offer: Fiber to the desktop Choice of media and connector types The 100BASE-X module supports multimode fiber (62.5- and 125-micron), and single-mode fiber using modular SFPs, enabling mix-and-match, pay-as-you-grow optic deployments. Fixed MT-RJ for 100BASE-FX and 10BASE-FL modules supports multimode fiber (62.5- and 125-micron) and single-mode fiber. Port densities Up to 48 ports per 100BASE-X module are supported, enabling up to BASE-X ports per 13-slot chassis; up to 24 ports per 10BASE-FL module are supported, enabling up to 288 ports of 10BASE-FL per 13-slot chassis (configured with 12 interface modules). Scalable and predictable system performance The modules provide 32-Gbps switching and throughput of 15 Mpps. Superior traffic management The modules are available with large 256-MB buffers for 48 ports. Available with 4 transmit queues per port, with 1 strict priority queue for quality of service (QoS). Each port supports Weighted Random Early Detection (WRED) for congestion avoidance within each queue, and Deficit Weighted Round Robin (DWRR) as well as Weighted Round Robin (WRR) for scheduling between queues to aid in traffic prioritization. Up to 8 thresholds can be configured to manage differentiated levels of service. Operational consistency Configurations are available for Cisco Catalyst , 6-, 9-, and 13-slot chassis running Cisco IOS Software and Cisco Catalyst Operating System Software; they are interoperable with all other interfaces and services modules, and forward-compatible with all Cisco Catalyst 6500 supervisor engines. Maximum network uptime and resiliency The modules support the Cisco Enhanced Per- VLAN Spanning Tree Plus (PVST+) protocol, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) and IEEE 802.1s Multiple Spanning Tree (MST) protocol, Per-VLAN Rapid Spanning Tree (PVRST) protocol, Hot Standby Router Protocol (HSRP), Virtual Router Redundancy Protocol (VRRP), Gateway Load Balancing Protocol (GLBP), Cisco EtherChannel, and IEEE 802.3ad link aggregation for fault-tolerant connectivity. Extensive management tools The modules support the CiscoWorks network management platform; Simple Network Management Protocol (SNMP) Versions 1, 2, and 3; and four Remote Monitoring (RMON) groups (statistics, history, alarms, and events). All contents are Copyright Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement. Page 1 of 9

2 Table 1. Cisco Catalyst 6500 Series 10- and 100-Mbps Ethernet Fiber-Based Interface Modules Primary Applications Product Number Interface Module Class Ports, Connectors, and Interface Media Queues per Port (Tx = Transmit, Rx = Receive)* Scheduler Buffers per Port Access, Metro WS-X6148-FE- Classic 48 ports, LC, Tx 1p3q8t per Deficit Weighted 256 MB shared Ethernet SFP SFP port Round Robin between 48 ports Access Rx 1p1q2t per group of 8 front (DWRR) and (5.4 MB per port) panel ports Weighted Round Robin (WRR) Access, Server WS-X6524- CEF256, 24 ports, Tx 1p3q1t, Rx DWRR 1.2 MB Farm 100FX-MM Upgradeable to multimode MT- 1p1q0t distributed CEF RJ, 100BASE- FX Access WS-X6324- Classic 24 ports, Tx 2q2t, Rx 1q4t WRR 128 KB 100FX-MM multimode MT- RJ, 100BASE- FX Access WS-X6324- Classic 24 ports, single- Tx 2q2t, Rx 1q4t WRR 128 KB 100FX-SM mode MT-RJ, 100BASE-FX Access WS-X FL- Classic 24 ports, Tx 2q2t, Rx 1q4t WRR 64 KB MT multimode MT- RJ, 10BASE-FL * Queues legend: 1p3q8t = 1 priority queue, 3 round-robin queues, and 8 thresholds APPLICATIONS Enterprise and Federal High-density fiber-based 10- and 100-Mbps Ethernet modules offer enterprises and military operations the ability to deploy fiber to the desktop to maximize security of their network. The Cisco Catalyst BASE-X and 100BASE-FX modules also can be deployed in areas where customers need long-distance (greater than 550m and up to 2 km) connection over existing multimode fiber where Gigabit Ethernet is not an option. Through the support of modular SFPs optics, the 48-port 100BASE-X module offers flexibility by allowing mix and match of different optics types, allowing smaller branches to use 100BASE-FX over multimode fiber to the desktop and 100BASE-LX over single-mode fiber to the main campus building. For all these applications, the Cisco Catalyst BASE-X module maximizes customers investment protection by allowing them to purchase and deploy SFP optics as they grow their network. Page 2 of 9

3 Service Providers For service providers, the 100BASE-X module is targeted for the metro Ethernet access layer as well as cable distribution hubs (DHUBs) or headends for cable companies. The Cisco Catalyst BASE-X module offers superior traffic management with support of 4 transmit queues per port with 1 strict priority queue for QoS. Each port supports Weighted Random Early Detection (WRED) for congestion avoidance within each queue, and DWRR for scheduling between queues to aid in traffic prioritization. Up to 8 thresholds can be configured to manage differentiated levels of service. The 100BASE-X module is also hardware-capable to support per-port VLAN ID translation (8 subports share a translation table with 64 entries) and the ability to map the inner class of service (CoS) to the outer CoS (CoS mutation) for 802.1Q-in-802.1Q (QinQ) deployments. FEATURES AND BENEFITS Cisco Catalyst 6500 Series Fiber-Based Classic 100BASE-X, 100BASE-FX, and 10BASE-FL Ethernet Interface Modules Designed for deployment in LAN access where optical interfaces are required and for metro Ethernet access, the Cisco Catalyst 6500 Series Classic 10- and 100-Mbps Ethernet fiber-based interface modules provide 10- or 100-Mbps Ethernet forwarding with the following operational advantages and characteristics (refer to Table 2): Forwarding architecture Use centralized Cisco Express Forwarding (CEF) Forwarding performance Forward packets up to 15 Mpps per system Bus connection Connect using a 32-Gbps shared bus connection Supervisor engine Work with Supervisor Engine 1A, Supervisor Engine 2, Supervisor Engine 32, or Supervisor Engine 720 Distributed forwarding upgrade None; Classic interface modules cannot be upgraded for distributed forwarding Slot requirements Can occupy any slot in any Cisco Catalyst 6500 Series chassis. Maximum port density per chassis up to 576 ports per Cisco Catalyst 6513 chassis, and up to 384 ports per Cisco Catalyst 6509 chassis. No inline power support for voice is available for 100BASE-X, 100BASE-FX, and 10BASE-FL fiber modules. Table 2. Classic 100BASE-X, 100BASE-FX, and 10BASE-FL Fiber Interface Modules Product Ports, Interfaces, and Connectors Maximum Distance per Cable Type WS-X6148-FE-SFP 48-port; SFP; LC Depends on SFPs deployed; refer to Table 3 WS-X FX-MM 24-port; 100BASE-FX; MT-RJ 2-km full duplex, 400m half duplex; and 125-micron multimode fiber WS-X FX-SM 24-port; 100BASE-FX; MT-RJ 10-km full or half duplex; standard ITU-T G.652 (IEC B1.1/B1.3) single-mode fiber WS-X FL-MT 24-port; 10BASE-FL; MT-RJ 2-km full or half duplex; and 125-micron multimode fiber Maximum Frame Size (jumbo frame) Support Up to 9216 bytes per frame Up to 9216 bytes per frame Up to 9216 bytes per frame Up to 9216 bytes per frame Table 3. SFPs for 48-port 100BASE-X Module Product ID Transceiver Type Connector Maximum Distance per Cable Type Interoperable with Page 3 of 9

4 GLC-FE-100FX 100BASE-FX LC 2-km full duplex, 400m half duplex; and 125-micron multimode fiber GLC-FE-100LX 100BASE-LX LC 10-km full or half duplex; standard ITU-T G.652 (IEC B1.1/B1.3) single-mode fiber WS-X FX-MM WS-X FX-MM WS-X FX-SM GLC-FE-100BX-D 100BASE-BX10-D LC 10 km over single strand of single-mode fiber; standard ITU-T G.652 (IEC B1.1/B1.3) single-mode fiber GLC-FE-100BX-U 100BASE-BX10-U LC 10 km over single strand of single-mode fiber; standard ITU-T G.652 (IEC B1.1/B1.3) single-mode fiber Figure 1. Classic 48 Port 100BASE-X Fiber Interface Module (part number WS-X6148-FE-SFP) Figure 2. Classic 24 Port 100BASE-FX Fiber Interface Module (part number WS-X FX-MM) Cisco Catalyst 6500 Series Fiber-Based CEF BASE-FX Ethernet Modules Designed for small campus distribution and core layers and for data-center and Web-hosting applications, Cisco Catalyst 6500 Series CEF BASE-FX Ethernet fiber-optic interface modules provide line-rate forwarding with the following operational advantages and characteristics: Forwarding architecture Use the central CEF engine located on the supervisor engine Forwarding performance Forward packets up to 30 Mpps per system and up to 15 Mpps per slot for slots upgraded to support distributed forwarding Page 4 of 9

Fabric connection Connect to the switch fabric using one 8-Gbps connection and the 32-Gbps shared bus Supervisor engine Work with Supervisor Engine 1A, Supervisor Engine 2, Supervisor 32, or

5 Fabric connection Connect to the switch fabric using one 8-Gbps connection and the 32-Gbps shared bus Supervisor engine Work with Supervisor Engine 1A, Supervisor Engine 2, Supervisor 32, or Supervisor Engine 720 Distributed forwarding upgrade Optional, field upgradeable to support distributed forwarding: DFC3 (part number WS-F6K-DFC3A or WS- F6K-DFC3B or WS-F6K-DFC3BXL) upgrade to operate with Supervisor Engine 720, DFC (part number WS-F6K-DFC) upgrade to operate with Supervisor Engine 2/MFSC2 and a Switch Fabric Module Slot requirements Can occupy any slot in any Cisco Catalyst 6500 Series chassis. Maximum port density per chassis up to 288 ports per Cisco Catalyst 6513 chassis, and up to 192 ports per Cisco Catalyst 6509 chassis. No inline power support for voice is available for 100BASE-FX fiber modules. Table 4. CEF BASE-FX Fiber Interface Module Product Ports, Interfaces, and Connectors Maximum Distance per Cable Type WS-X FX-MM 24-port; 100BASE-FX; MT-RJ 2-km full duplex, 400m half duplex; and 125-micron multimode fiber Maximum Frame Size (jumbo frame) Support Up to 9216 bytes Figure 3. CEF256-Based 100BASE-FX Fiber Interface Module (part number WS-X FX-MM) Page 5 of 9

6 ORDERING INFORMATION Table 5 provides ordering information for Cisco Catalyst 6500 Series 10- and 100-Mbps Ethernet fiber-based interface modules. Table 5. Cisco Catalyst 6500 Series 10- and 100-Mbps Ethernet Fiber-Based Interface Modules Product Number WS-X6148-FE-SFP GLC-FE-100FX GLC-FE-100LX GLC-FE-100BX-D GLC-FE-100BX-U WS-X FX-MM WS-X FX-MM WS-X FX-SM WS-X FL-MT Description Cisco Catalyst port 100BASE-X Classic Interface Module (requires SFPs) 100BASE-FX SFP for WS-X6148-FE-SFP, multimode fiber, LC connector 100BASE-LX SFP for WS-X6148-FE-SFP, single-mode fiber, LC connector 100BASE-BX10-D SFP for WS-X6148-FE-SFP, single strand of single-mode fiber, LC connector 100BASE-BX10-U SFP for WS-X6148-FE-SFP, single strand of single-mode fiber, LC connector Cisco Catalyst port, CEF BASE-FX Interface Module, multimode fiber, MT-RJ; field-upgradable to support distributed forwarding with the addition of the distributed forwarding daughter card (part number WS- F6K-DFC= or WS-F6K-DFC3A= or WS-F6K-DFC3B= or WS-F6K-DFC3BXL=) Cisco Catalyst port 100BASE-FX Classic Interface Module, multimode fiber, MT-RJ Cisco Catalyst port, 100BASE-FX Classic Interface Module, single-mode fiber, MT-RJ Cisco Catalyst port 10BASE-FL Classic Interface Module, multimode fiber, MT-RJ SPECIFICATIONS Standard Network Protocols Ethernet: IEEE Fast Ethernet: IEEE and 100BASE-FX IEEE 802.1d, IEEE 802.1p, IEEE 802.1q, IEEE 802.1s, IEEE 802.1w, IEEE 802.3x, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3ad, and IEEE 802.3ah Physical Specification Occupies one slot in a Cisco Catalyst 6500 Series chassis Dimensions (H x W x D): 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm) Environmental Conditions Operating temperature: 32 to 104 F (0 to 40 C) Storage temperature: 40 to 167 F ( 40 to 75 C) Relative humidity: 10 to 90 percent, noncondensing Operating altitude: Sea level to 6500 ft (1981m) Safety Compliance UL CSA-C22.2 No EN Page 6 of 9

7 IEC AS/NZS 60950/TS001 EMC Compliance FCC Part 15 (CFR 47) Class A VCCI Class A EN55022 Class A CISPR 22 Class A CE marking AS/NZS 3548 Class A ETS EN55024 EN EN Network Management ETHERLIKE-MIB (RFC 1643) IF-MIB (RFC 1573) Bridge MIB (RFC 1493) CISCO-STACK-MIB CISCO-VTP-MIB CISCO-CDP-MIB RMON MIB (RFC 1757) CISCO-PAGP-MIB CISCO-STP-Extensions-MIB CISCO-VLAN-Bridge-MIB CISCO-VLAN-Membership-MIB CISCO-UDLDP-MIB CISCO-ENTITY-FRU-CONTROL-MIB CISCO-COPS-CLIENT-MIB ENTITY-MIB (RFC 2037) HC-RMON RFC1213-MIB (MIB-II) SMON-MIB Maximum Cabling Distance 100BASE-FX multimode Fast Ethernet: and 125-micron multimode fiber: 400m half duplex, 2-km full duplex 100BASE-FX single-mode Fast Ethernet: standard ITU-T G.652 (IEC B1.1/B1.3) single-mode fiber: 10-km half or full duplex 100BASE-LX Fast Ethernet: standard ITU-T G.652 (IEC B1.1/B1.3) single-mode fiber: 10-km half or full duplex 100BASE-BX10 Fast Ethernet: standard ITU-T G.652 (IEC B1.1/B1.3) single-mode fiber: 10 km over single strand of fiber 10BASE-FL Ethernet: and 125-micron multimode fiber: 2-km half or full duplex Indicators and Interfaces Status: Green (operational); red (faulty); orange (module booting or running diagnostics) Link good: Green (port active); orange (disabled); off (not active or not connected); blinking orange (failed diagnostic and disabled) Page 7 of 9

8 100BASE-X: SFPs, LC connector (female) 100BASE-FX multimode: MT-RJ (female, multimode) 100BASE-FX single-mode: MT-RJ (female, single mode) 10BASE-FL: MT-RJ (female, multimode) SERVICE AND SUPPORT Whether your company is a large organization, a commercial business, or a service provider, Cisco Systems is committed to maximizing the return on your network investment. Cisco offers a portfolio of technical support services to help ensure that your Cisco products operate efficiently, remain highly available, and benefit from the most up-to-date system software. The Cisco Technical Support Services organization offers the following features, providing network investment protection and minimal downtime for systems running mission-critical applications: Provides Cisco networking expertise online and on the telephone Creates a proactive support environment with software updates and upgrades as an ongoing integral part of your network operations, not merely a remedy when a failure or problem occurs Makes Cisco technical knowledge and resources available to you on demand Augments the resources of your technical staff to increase productivity Complements remote technical support with onsite hardware replacement Cisco Technical Support Services include: Cisco SMARTnet support Cisco SMARTnet Onsite support Cisco Software Application Services, including Software Application Support and Software Application Support plus Upgrades For more information, visit: FOR MORE INFORMATION Visit the following link to view the following data sheets: Cisco Catalyst 6500 Series Data Sheet Cisco Catalyst 6500 Series Supervisor Engine 1A and Supervisor Engine 2 Data Sheet Cisco Catalyst 6500 Series Supervisor Engine 720 Data Sheet Cisco Catalyst 6500 Series Gigabit Ethernet Interface Modules Data Sheet Cisco Catalyst 6500 Series 10 Gigabit Ethernet Interface Modules Data Sheet Cisco Catalyst 6500 Series FlexWAN Interface Modules Data Sheet Cisco Catalyst 6500 Series Switch Fabric Interface Modules Data Sheet Cisco Catalyst 6500 Series Content Services Module (CSM) Data Sheet Cisco Catalyst 6500 Series Firewall Services Module Data Sheet Page 8 of 9

Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA www.cisco.

9 Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA USA Tel: NETS (6387) Fax: European Headquarters Cisco Systems International BV Haarlerbergpark Haarlerbergweg CH Amsterdam The Netherlands www-europe.cisco.com Tel: Fax: Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA USA Tel: Fax: Asia Pacific Headquarters Cisco Systems, Inc. 168 Robinson Road #28-01 Capital Tower Singapore Tel: Fax: Cisco Systems has more than 200 offices in the following countries and regions. Addresses, phone numbers, and fax numbers are listed on the Cisco Website at Argentina Australia Austria Belgium Brazil Bulgaria Canada Chile China PRC Colombia Costa Rica Croatia Cyprus Czech Republic Denmark Dubai, UAE Finland France Germany Greece Hong Kong SAR Hungary India Indonesia Ireland Israel Italy Japan Korea Luxembourg Malaysia Mexico The Netherlands New Zealand Norway Peru Philippines Poland Portugal Puerto Rico Romania Russia Saudi Arabia Scotland Singapore Slovakia Slovenia South Africa Spain Sweden Switzerland Taiwan Thailand Turkey Ukraine United Kingdom United States Venezuela Vietnam Zimbabwe Copyright 2005 Cisco Systems, Inc. All rights reserved. CCIP, CCSP, the Cisco Powered Network mark, Cisco Unity, Follow Me Browsing, FormShare, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iquick Study are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, the Cisco IOS logo, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Empowering the Internet Generation, Enterprise/Solver, EtherChannel, EtherSwitch, Fast Step, GigaStack, Internet Quotient, IOS, IP/TV, iq Expertise, the iq logo, iq Net Readiness Scorecard, LightStream, Linksys, MeetingPlace, MGX, MICA, the Networkers logo, Networking Academy, Network Registrar, Packet, PIX, Post-Routing, Pre-Routing, RateMUX, Registrar, ScriptShare, SlideCast, SMARTnet, StrataView Plus, Stratm, SwitchProbe, TeleRouter, The Fastest Way to Increase Your Internet Quotient, TransPath, and VCO are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All other trademarks mentioned in this document or Website are the 2005 property Cisco of their Systems, respective Inc. owners. All right The reserved. use of the word partner does not imply a partnership relationship between Cisco and any other company. Important (0501R) notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com c_ETMG_CC_1.05 Page 9 of 9 Printed in the USA

ANNOUNCING NEW PRODUCT OFFERINGS FOR THE CISCO CATALYST 6500 SERIES

PRODUCT BULLETIN NO. 2028 ANNOUNCING NEW PRODUCT OFFERINGS FOR THE CISCO CATALYST 6500 SERIES NEW PRODUCT OFFERINGS: Cisco Catalyst 6503 Firewall Security System Cisco Catalyst 6506 Firewall Security System