IEXT224-4PH-L IEXT224-4PH-R Long Reach POE Extenders

Transcription

1 IEXT224-4PH-L IEXT224-4PH-R Long Reach POE Extenders 1

2 LEGAL The information in this publication has been carefully checked and is believed to be entirely accurate at the time of publication. CTC Union Technologies assumes no responsibility, however, for possible errors or omissions, or for any consequences resulting from the use of the information contained herein. CTC Union Technologies reserves the right to make changes in its products or product specifications with the intent to improve function or design at any time and without notice and is not required to update this documentation to reflect such changes. CTC Union Technologies makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does CTC Union assume any liability arising out of the application or use of any product and specifically disclaims any and all liability, including without limitation any consequential or incidental damages. CTC Union products are not designed, intended, or authorized for use in systems or applications intended to support or sustain life, or for any other application in which the failure of the product could create a situation where personal injury or death may occur. Should the Buyer purchase or use a CTC Union product for any such unintended or unauthorized application, the Buyer shall indemnify and hold CTC Union Technologies and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, expenses, and reasonable attorney fees arising out of, either directly or indirectly, any claim of personal injury or death that may be associated with such unintended or unauthorized use, even if such claim alleges that CTC Union Technologies was negligent regarding the design or manufacture of said product. WARNING: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference in which case the user will be required to correct the interference at his own expense. NOTICE: (1) The changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. (2) Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. CISPR PUB.22 Class A COMPLIANCE: This device complies with EMC directive of the European Community and meets or exceeds the following technical standard. EN Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment. This device complies with CISPR Class A. WARNING: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. CE NOTICE Marking by the symbol CE indicates compliance of this equipment to the EMC directive of the European Community. Such marking is indicative that this equipment meets or exceeds the following technical standards: EN 55022:2006+A1:2007, Class A, EN55024:2010, and EN :2006 2

3 CTC Union Technologies Co., Ltd. Far Eastern Vienna Technology Center (Neihu Technology Park) 8F, No. 60, Zhouzi St. Neihu, Taipei, 114 Taiwan Phone: FAX: IEXT224-4PH-L IEXT224-4PH-R Long Reach PoE Extenders User Manual Version 1.0 July 2015 This document is the current official release manual. Contents are subject to change without prior notice. Please check CTC Union's website for any updated manual or contact us by at Please address any comments for improving this manual or to point out omissions or errors to Thank you CTC Union Technologies Co.,Ltd. All Rights Reserved The contents of this document are subject to change without any prior notice. 3

4 Table of Contents 1. PRODUCT INTRODUCTION DESCRIPTION FEATURES SPECIFICATIONS APPLICATIONS REFERENCE PERFORMANCE DATA HW DESCRIPTION OVERVIEW PRODUCT OUTLOOK LED DEFINITION POWER POSITION DIP SWITCH REGULATORY COMPLIANCE... 13

5 1. Product Introduction 1.1 Description IEXT224-4PH-L & IEXT224-4PH-R Long Reach POE Extenders are designed to extend the reach of Ethernet Data and IEEE 802.3at Power over Ethernet beyond its natural limitations of 100 m for the network infrastructure. The solution works in pairs for point to point connectivity. It features IEXT224-4PH-L Long Reach PoE Extender (CO), the master unit at the central site that can transmit data and power over a single pair of telephone grade UTP wire up to 1,200 m or coaxial cable up to 1,800 m. On the receiving end is IEXT224-4PH-R Long Reach PoE Extender with 4 PoE (PSE) ports (CPE). Without the need for local power supply, each IEXT224-4PH-R is equipped with four 10/100Base-TX IEEE 802.3at POE Ports for total power budget of 30W that can support any remote IEEE 802.3at/af powered device (PD) like Wi-Fi Access Point, IP phone, and IP Camera. It enables centralized management of power supply from a single location for easy, efficient and cost- effective installation. When enabling local power supply by dip switch, IEXT224-4PH-R can supply power budget of 30W to each one of the four POE ports. IEXT224-4PH-L & IEXT224-4PH-R Long Reach PoE Extenders are an ideal POE extension solution for service providers to deploy networking applications in public areas that requires Wireless AP, IP Phones and IP Cameras. 1.2 Features Complies to IEEEE 802.3at POE Industrial-Grade Extenders for applications in harsh environment Simultaneous transmission of Ethernet data and POE Power over UTP wire Centralized management of power supply Eliminated the need for local power supply at remote sites Easy cabling for quick installation Long transmission distance up to 1000 m Quick deployment and easy maintenance. Flexible and efficient power management Automatically switch between VDSL2 Profile 30a and 17a to utilize bandwidth performance Dip Switch to enable local power supply and provide full 30W to each of the four POE ports. 5

6 1.3 Specifications Hardware Interfaces: Terminal Block for Copper Port BNC Female for Coaxial Port 4 x RJ-45 10/100Base-TX IEEE 802.3at POE Port 3 Position Dip Switch Selectable target band plan (Asymmetric or Symmetric) Selectable target SNR margin (6dB or 9dB) Selectable Remote Power (ON) or Local Power (OFF) LED Indicators: Active: System Status LPWR/RPWR: Local Power/Remote Power POE: POE Port Status Available POE Output(Watts): 5/15/30 Line Speed(Mbps): Link/20/40/60/80/100 Power Supply: Terminal blocks for redundant DC power Standards Support: VDSL2 ITU-T G VDSL2 Profiles: 17a and 30a Protocol Support Transparent bridging to higher layer protocols Operating Environment Operating Temperature: -40 C to 75 C Storage Temperature: -40 C to 85 C Humidity: 10% - 95% (non-condensing) Physical Hardened aluminum case, IP30 Dimensions: 62 x 135 x mm Installation: DIN-Rail, Panel Rack Mounting Regulatory Compliance CE FCC Part 15 Class B EN60950 inputs Din connector for external AC to DC adaptor Input Voltage: 48 to 57 VDC Power Consumption: 65 Watts maximum Over current protection Automatic short protection 6

7 1.4 Applications The solution works in pairs for point to point connectivity. It features IEXT224-4PH-L Long Reach PoE Extender (CO), the master unit at the central site that can transmit data and power over a single pair of telephone grade UTP wire up to 1,200m or coaxial cable up to 1,800 m. On the receiving end is IEXT224-4PH-R Long Reach PoE Extender with 4 PoE(PSE) ports (CPE). Without the need for local power supply, each IEXT224-4PH-R is equipped with four 10/100Base-TX IEEE 802.3at POE Ports for total power budget of 30W that can support any remote IEEE 802.3at/af powered device (PD) like Wi-Fi Access Point, IP Phone, and IP Camera. Picture 1.1 Remote Power Enable Picture 1.2 Remote Power Disable 7

8 1.5 Reference Performance Data UTP 24AWG Copper Wire SNR 6dB 6dB Profile Asymmetrical Symmetrical Distance Upstream Line Rate Downstream Line Rate Upstream Line Rate Downstream Line Rate POE output power (Mbps) (Mbps) (Mbps) (Mbps) 300 m W 400 m W 600 m W 800 m W 1,000 m W 1,200 m W Coaxial Cable SNR 6dB 6dB Profile Asymmetrical Symmetrical Distance Upstream Line Rate Downstream Line Rate Upstream Line Rate Downstream Line Rate POE output power (Mbps) (Mbps) (Mbps) (Mbps) 400 m W 600 m W 800 m W 1000 m W 1,200 m W 1,400 m W 1,600 m W 1,800 m W 2,000 m

9 2. HW Description 2.1 Overview IEXT224-4PH-L & IEXT224-4PH-R devices are Long Reach POE Extenders with four 10/100Base-TX IEEE 802.3at POE Ports. This chapter shows the product outlook and Hardware interfaces. 2.2 Product Outlook CO Faceplate CPE Faceplate 9

10 2.3 LED Definition The LED indicators could provide instant feedback to users; the behaviors of the LED are given in below table: LED Name Indicator/Color Condition Local PWR Remote PWR POE (CPE) Link Line Speed POE Output (CPE) RJ-45 Green-off No local input power Green-on Local input power received Green-off No power is transmitted over VDSL interface Green-on Power is transmitted over VDSL interface Green-off No power is transmitted over Ethernet port Green-on Power is transmitted over Ethernet port Green-off VDSL link not link up slow flashing VDSL port is under handshaking Fast flashing VDSL port has data transmission or reviving Green-on VDSL port link up Green-on Displays VDSL link speed in Mbps (100M/80M/60M/40M/20M), if 80M LED is on then VDSL downstream line speed is in the range 80Mbps to 100Mbps. Green-on Displays POE PSE available output power in Watt(30W/15W/5W) Remote Terminal Only Green-on Ethernet link up and speed is 100M Green-flashing Data transmission or receiving Green-off Ethernet is no link up Yellow-on Ethernet link up and speed is 10M Yellow-flashing Data transmission or receiving Yellow-off Ethernet is no link up Table 2-1 LED indications 10

11 2.4 Power Input: - IEXT224-4PH-L (CO): Provide two redundancy local input powers; power voltage is 48VDC to 57VDC, terminal Block. - IEXT224-4PH-R (CPE): Provide two redundancy local input powers; power voltage is 48VDC to 57VDC, terminal Block. Output: - IEXT224-4PH-L (CO): Provide 96VDC output to VDSL Line (Remote Power Feeding) to support remote power to CPE. - IEXT224-4PH-R (CPE): Ethernet port provide 4-port POE PSE function to 802.3at (30W). Power Consumption: - IEXT224-4PH-L (CO): Max. 65W with Remote Power function enable, provide CPE POE PSE 30W. - IEXT224-4PH-R (CPE): Max. 45W with Remote Power function enable, provide CPE POE PSE 30W Protection: - Provide Over-Current protection and resettable smart Short-Circuit protection on both VDSL interface and POE PSE interface. Two power level output: - The function is set to detect CPE function. - When CO cannot detect CPE, output is 48VDC to VDSL line. - When CO detected that the CPE is successfully connected, POV output is 96VDC to VDSL line. 11

12 2.5 3-Position DIP Switch IEXT224-4PH-L & IEXT224-4PH-R are equipped with DIP Switch selection, which can allow users to select the parameters in order to meet the needs of different applications. The parameter options should be set identically on both CO and CPE sides. Option Profile SNR Remote Power On Asymmetrical 6dB Enable Off Symmetrical 9dB Disable 12

13 3. Regulatory Compliance IEXT224-4PH-L & IEXT224-4PH-R are designed to comply with the following standards CE FCC Part 15 Class A EN

14 This page is intentionally left blank. 14

15 15