Industrial L2+ 24-Port 10/100/1000T 802.3at PoE + 4-Port shared 100/1000X SFP Managed Switch (-40~75 degrees C)

Transcription

1 Industrial L2+ 24-Port 10/100/T 802.3at + 4-Port shared 100/X SFP Managed Switch (-40~75 degrees C) Physical Port 24 10/100/BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at + Injector 4 100/BASE-X mini-gbic/sfp slots, shared with Port-21 to Port-24, compatible with 100BASE-FX SFP e RJ45 console interface for basic management and setup Environmentally Hardened Design PLAET, a new industrial Layer 2+ managed Gigabit Switch, features 24 10/100/Mbps IEEE 802.3af/at injector ports and 4 shared SFP ports, and supports static Layer 3 routing in a 1U case. With a total switch fabric of 48Gbps, the can handle large amounts of data in a secure topology linking to an industrial backbone or high-capacity servers. The is capable of providing non-blocking switch fabric and wire-speed throughput in the temperature range from -40 to 75 degrees C without any packet loss and CRC error. It greatly simpliies the tasks of upgrading the industrial LA for catering to increasing bandwidth demands. Furthermore, it adopts user-friendly Front Access design for easy wiring and maintenance of the when placed in the cabinet. 2 x DI & DO 4 x 100/BASE-X SFP Slot 24 x Gigabit + RJ45 over Ethernet Complies with IEEE 802.3at over Ethernet Plus/endspan PSE Up to 24 IEEE 802.3af/802.3at devices powered Supports power up to 36 watts for each port Auto detects powered device (PD) Circuit protection prevents power interference between ports Remote power feeding up to 100m management features Total power budget control Per port function enable/disable admin-mode control port power feeding priority Per port power limit PD classiication detection Intelligent features Temperature threshold control usage threshold control PD alive check schedule Industrial Case & Installation 4 x Combo Interface 2 x DC Input RJ45 Type Console Redundant Ring, Fast Recovery for Critical etwork Applications The supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, Spanning Tree Protocol (802.1s MSTP), and redundant power input system into customer s industrial automation network to enhance system reliability and uptime in harsh factory environments. In a simple ring network, the recovery time of data link can be as fast as 20ms. IP30 metal case protection 19-inch rack-mountable design 48~56V DC, redundant power with polarity reverse protect function Supports 6000V DC Ethernet ESD protection -40 to 75 degrees C operating temperature Digital Input and Digital Output 2 Digital Input (DI) 2 Digital Output (DO) Integrate sensors into auto alarm system Transfer alarm to IP network via and SMP trap iederlassung Österreich 1

2 Layer 3 IP Routing Features Office Factory Supports maximum 32 software static routes and route summarization Industrial MA Switch Layer 2 Features E.R.P.S. Ring for Metropolitan Area etwork Application Recovery Time < 50ms Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame low control (full-duplex) High performance of Store-and-Forward architecture, and runt/ CRC iltering eliminates erroneous packets to optimize the network bandwidth Storm Control support 8-Port MA Switch Industrial Switch Highway Control Center Industrial Switch Broadcast/Multicast/Unicast Supports VLA IEEE 802.1Q tagged VLA Up to 255 VLAs groups, out of 4094 VLA IDs High for Security and Public Service Applications Provider Bridging (VLA Q-in-Q) support (IEEE 802.1ad) To fulfill the demand of High for network applications with Gigabit Private VLA Edge (PVE) speed transmission under wide temperature, the provides 24 Protocol-based VLA 10/100/Mbps ports featuring IEEE 802.3at over Ethernet Plus (+) that combines up to 400-watt power output and data per port over one Cat.5E/6 Ethernet cable. With a total 400-watt budget on the whole system, the is MAC-based VLA Voice VLA Supports Spanning Tree Protocol IEEE 802.1D Spanning Tree Protocol (STP) designed speciically to satisfy the growing demand of higher power consuming network IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) PDs (powered devices) such as PTZ (Pan, Tilt & Zoom)/Speed Dome network cameras, IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), multi-channel (802.11a/b/g/n) wireless LA access points and other network devices by providing power, doubling that of the current conventional 802.3af. spanning tree by VLA BPDU Guard Supports Link Aggregation 802.3ad Link Aggregation Control Protocol (LACP) Cisco ether-channel (static trunk) Maximum 12 trunk groups with 4 ports per trunk group PTZ Camera Up to 8Gbps bandwidth (duplex mode) Video Phone WiMAX AP/CPE Provides port mirror (1-to-1) Port mirroring to monitor the incoming or outgoing trafic on a particular port 30.8W Door Phone Thin Client Loop protection to avoid broadcast loops Supports ERPS (Ethernet Ring Protection Switching) Upgrade 15.4W Quality of Service Ingress Shaper and Egress Rate Limit per port bandwidth control Wireless AP/Router IP Phone 8 priority queues on all switch ports Trafic classiication IP Camera IEEE 802.1p CoS IP TOS/DSCP/IP precedence Intelligent Alive Check for ed Device The Switch can be configured to monitor connected PD s status in real time via ping action. ce the PD stops working and responding, the IGS IP TCP/UDP port number Typical network application Strict priority and Weighted Round Robin (WRR) CoS policies 24P4S will recycle the port power and bring the PD back to work. It also greatly Supports QoS and In/Out bandwidth control on each port enhances the reliability in that the port will reset the PD power, thus reducing Trafic-policing policies on the switch port administrator s management burden. DSCP remarking iederlassung Österreich 2

3 Step 1 Step 2 o Response... PT Camera PD Status Good!! Multicast Ping Request Supports IGMP snooping v1, v2 and v3 Ping Request Ping Echo Check alive status for 3 times Step 4 Step 3 Querier mode support Alarm otification O IGMP snooping port iltering PD Alive!! MLD snooping port iltering OFF O Supports MLD snooping v1 and v2 O MVR (Multicast VLA Registration) Restart device if without response Security Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection on the Earth, the can effectively control the power supply besides its IEEE 802.1x port-based/mac-based network access authentication capability of giving high watts power. The built-in schedule function helps you to Built-in RADIUS client to cooperate with the RADIUS servers enable or disable power feeding for each port during specified time intervals TACACS+ login users access authentication and it is a powerful function to help SMBs or enterprises save power and money. RADIUS/TACACS+ users access authentication IP-based Access Control List (ACL) MAC-based Access Control List 8 AM 5 PM 5 PM 8 AM Source MAC/IP address binding DHCP snooping to ilter distrusted DHCP messages Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding IP Source Guard prevents IP spooing attacks IP address access management to prevent unauthorized 6 Watts 6 Watts 12 Watts 12 Watts Total Consumption of 36 watts/hr Off Off Off 6 Watts 6 Watts 12 Watts 12 Watts intruder Save 24 watts / hr during off-business hours Total Saved = 10800watts / month BASE-TX UTP with Management Switch Management Interfaces Digital Input and Digital Output for External Alarm The supports Digital Input and Digital Output on its front panel. This external alarm enables users to use Digital Input to detect and log external device status (such as door intrusion detector), and send event alarm to the administrators. The Digital Console/Telnet Command Line Interface Web switch management SMP v1 and v2c switch management SSH/SSL and SMP v3 secure access Output could be used to alarm the administrators if the port shows link Four RMO groups (history, statistics, alarms, and events) down, link up or power failure. IPv6 IP address/tp/ds management Built-in Trivial File Transfer Protocol (TFTP) client Digital Input BOOTP and DHCP for IP address assignment Security OK!! Alarm Warning Alarm Messaging Firmware upload/download via HTTP/TFTP DHCP Relay DHCP Option 82 User Privilege levels control Enclosure Enclosure Door Detector (Door Closed) SMP TRAP Door Detector (Door Open) Mail System Log etwork Time Protocol (TP) Link Layer Discovery Protocol (LLDP) SFP-DDM (Digital Diagnostic Monitor) Digital Output Cable diagnostic technology provides the mechanism to detect and report potential cabling issues Reset button for system reboot or reset to factory default PLAET Smart Discovery Utility for deployment management DC Failure RJ45 Cable Link Down Fiber Cable Link Down iederlassung Österreich 3

4 Layer 3 IPv4 and IPv6 Software VLA Routing for Secure and Flexible Management To help customers stay on top of their businesses, the not only provides ultra high transmission performance and excellent Layer 2 technologies, but also IPv4/IPv6 software VLA routing feature which allows to crossover different VLAs and different IP addresses for the purpose of having a highly-secured, lexible management and simpler networking application. Robust Layer 2 Features The can be programmed for advanced switch management functions such as dynamic port link aggregation, Q-in-Q VLA, private VLA, Rapid Spanning Tree Protocol, Layer 2 to Layer 4 QoS, bandwidth control and IGMP snooping. The provides 802.1Q tagged VLA, and the VLA groups allowed will be maximally up to 255. Via aggregation of supporting ports, the allows the operation of a high-speed trunk combining multiple ports. It enables a maximum of up to 12 trunk groups with 4 ports per trunk group, and supports fail-over as well. Eficient Management For efficient management, the is equipped with console, Web and SMP management interfaces. With the built-in Web-based interface, the offers an easy-to-use, platform-independent management and coniguration facility. For text-based management, the can be accessed via Telnet and the console port. Moreover, it also offers secure remote management via any standard-based management software by supporting SMP v3 connection which encrypts the packet content at each session Computer SSL SMPv3 SSH ful Security The offers comprehensive Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection mechanism also comprises 802.1x port-based and MAC-based user and device authentication. With the private VLA function, communication between edge ports can be prevented to ensure user privacy. The network administrators can now construct highly-secured corporate networks with considerably less time and effort than before. Flexibility and Extension Solution The four mini-gbic slots built in the support dual speed, 100BASE-FX and BASE-SX/LX SFP (Small Form-factor Pluggable) fiberoptic modules, meaning the administrator now can lexibly choose the suitable SFP transceiver according to not only the transmission distance but also the transmission speed required. The distance can be extended from 550 meters (multi-mode iber) to 10/50/70/120 kilometers (single-mode iber or WDM iber). They are well suited for applications within the enterprise data centers and distributions. iederlassung Österreich 4

5 Applications Perfect Integration Solution for Outdoor IP Camera and VR System The provides 24 10/100/Mbps 802.3at + ports and can offer sufficient power to 24 IP cameras at the same time. In addition, with the 4 100/BASE-X SFP interfaces, the can connect to core iber switch and send video stream to VR and monitoring center. Through the high-performance switch architecture, the facilitates the recorded video iles from the 24 IP cameras to be saved in the VR systems. Furthermore, the VR systems can be controlled and monitored both in the local LA and the remote site via Internet. The IGS P4S undoubtedly brings an ideal secure surveillance system at a lower total cost. Industrial Area Department/Workgroup Switch Providing up to 24 +, in-line power interfaces, the can easily build a power centrally controlled for IP phone system, IP camera system, or wireless AP group for Industrial network. For instance, 24 IP cameras or wireless access points can be easily installed around the corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the makes the installation of IP cameras or wireless AP easier and more eficient. Wireless AP VoIP Phone + PTZ Speed Dome Core Switch BASE-T UTP with O O O O 100BASE-TX UTP BASE-T UTP Serial Line (RS-XXX) Security Gate Serial Server Access Control IP Camera High IP Surveillance and Wireless LA Service in Public Transportation With IEEE 802.3at over Ethernet Plus standard, the can directly connect with any IEEE 802.3at end-nodes like PTZ (Pan, Tilt & Zoom) network cameras, PTZ speed dome cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LA access points. Wireless LA would be more eficient for the transportation station to provide high speed and wide area Internet services for travelers. With the wireless LA structure, the transportation authority gains beneits from less cost while providing better Internet services in wider areas for the travelers. Central Management Center Wireless AP (PD) IP Camera 802.3af Wireless AP Core Switch Wireless AP PTZ Camera 802.3at Splitter DC DC 802.3at Splitter PTZ Camera DC Airport DC 100BASE-TX UTP 100BASE-TX UTP w Line (DC) BASE-SX/LX Fiber-optic 2.4GHz n Train Station iederlassung Österreich 5

6 Speciications Product Hardware Speciications Copper Ports SFP/mini-GBIC Slots Injector Port 24 10/100/BASE-T RJ45 auto-mdi/mdi-x ports 4 BASE-SX/LX/BX SFP interfaces, shared with Port-21 to Port-24 Compatible with 100BASE-FX SFP 24 ports with 802.3at/af injector function with Port-1 to Port-24 Console 1 x RJ45-to-RS232 serial port (115200, 8,, 1) Switch Architecture Switch Fabric Throughput (packet per second) Address Table Shared Data Buffer Flow Control Jumbo Frame Reset Button ESD Protection Enclosure Installation Store-and-Forward 48Gbps/non-blocking 35.71Mpps@ 64Bytes packet 8K entries, automatic source address learning and aging 4Mbits IEEE 802.3x pause frame for full-duplex Back pressure for half-duplex 9Kbytes < 5 sec: System reboot > 5 sec: Factory default 6KV DC IP30 metal case 19-inch rack-mountable design Connector Alarm DI, DO Fixed 6-pin terminal block for power input Pin 1/2 for 1, Pin 3/4 for fault alarm, Pin 5/6 for 2 Removable 6-pin terminal block for DI/DO interface Pin 1/2 for DI 1 & 2, Pin 3/4 for DO 1 & 2, Pin 5/6 for GD e relay output for power failure. Alarm relay current carry ability: 24V DC 2 Digital Input (DI): Level 0: -24V~2.1V (±0.1V) Level 1: 2.1V~24V (±0.1V) Input load to 24V DC, 10mA max. 2 Digital Output (DO): Open collector to 24V DC, 100mA max. LED Indicator Dimensions (W x D x H) Weight Requirements Consumption Over Ethernet Standard Supply Type Output System: DC 1 (Green) DC 2 (Green) Fault Alarm (Red) (Red) Fault (Red) Max. (Red) Ring (Green) Ring Owner (Green) Per 10/100/T RJ45 + Ports: -in-use (Orange) LK/ACT (Green) Per SFP Interface: 100 LK/ACT (Orange) LK/ACT (Green) 440 x 300 x 44.5 mm 3638g Dual 48~56V DC (>53V DC for + output recommended) Max watts/81.55btu ( on without loading) Max. 423 watts/ btu (Full loading with function) IEEE 802.3at over Ethernet Plus/PSE End-span IEEE 802.3af Standard - Per port 48V~53V DC (depending on the power supply), max watts IEEE 802.3at Standard - Per port 53V~56V DC (depending on the power supply), max. 36 watts Pin Assignment 1/2(+), 3/6(-) Budget 48V input - 300W maximum (depending on power input) 56V input - 400W maximum (depending on power input) Max. number of Class 2 PDs 24 Max. number of Class 3 PDs 24 Max. number of Class 4 PDs 15 Layer 2 Function Basic Management Interfaces Secure Management Interfaces Console; Telnet; Web browser; SMP v1, v2c SSH, SSL, SMP v3 iederlassung Österreich 6

7 Port Coniguration Port Status Port Mirroring VLA Link Aggregation QoS IGMP Snooping MLD Snooping Access Control List Bandwidth Control SMP MIBs Layer 3 Function IP Interfaces Routing Table Routing Protocols Standards Conformance Regulatory Compliance Stability Testing Standards Compliance Port disable/enable Auto-negotiation 10/100/Mbps full and half duplex mode selection Flow control disable/enable saving mode control Display each port s speed duplex mode, link status, low control status, auto negotiation status, trunk status TX/RX/both 1 to 1 monitor 802.1Q tagged based VLA, up to 255 VLA groups Q-in-Q tunneling Private VLA Edge (PVE) MAC-based VLA Protocol-based VLA Voice VLA MVR (Multicast VLA Registration) Up to 255 VLA groups, out of 4094 VLA IDs IEEE 802.3ad LACP/static trunk Supports 12 trunk groups with 4 ports per trunk group Trafic classiication based, strict priority and WRR 8-level priority for switching - Port number p priority Q VLA tag - DSCP/TOS ield in IP packet IGMP (v1/v2/v3) snooping, up to 255 multicast groups IGMP querier mode support MLD (v1/v2) snooping, up to 255 multicast groups MLD querier mode support IP-based ACL/MAC-based ACL Up to 123 entries Per port bandwidth control Ingress: 500Kb~Mbps Egress: 500Kb~Mbps RFC-1213 MIB-II IF-MIB RFC-1493 Bridge MIB RFC-1643 Ethernet MIB RFC-2863 Interface MIB RFC-2665 Ether-Like MIB RFC-2819 RMO MIB (Group 1, 2, 3 and 9) RFC-2737 Entity MIB RFC-2618 RADIUS Client MIB RFC-2933 IGMP-STD-MIB RFC3411 SMP-Frameworks-MIB IEEE 802.1X PAE LLDP MAU-MIB Max. 8 VLA interfaces Max. 32 routing entries IPv4 software static routing IPv6 software static routing FCC Part 15 Class A, CE IEC (free fall) IEC (shock) IEC (vibration) IEEE BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit BASE-T IEEE 802.3x low control and back pressure IEEE 802.3ad port trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLA tagging IEEE 802.1x Port Authentication etwork Control IEEE 802.1ab LLDP IEEE 802.3af over Ethernet IEEE 802.3at over Ethernet Plus RFC 768 UDP RFC 793 TFTP RFC 791 IP RFC 792 ICMP RFC 2068 HTTP RFC 1112 IGMP v1 RFC 2236 IGMP v2 iederlassung Österreich 7

8 Input DC 48-56V DC 1 Fault DC 2 Please refer to user s manual before connect the DC wire. FAL Max. DC Input Range: 48V-56V DC FAL DC2 Ring DC1 R.O. DI 0 DI 1 DO 0 DO 1 GD GD LK ACT In-Use Console ,, 8, 1 LK/ACT LK/ACT Reset Environment Operating Temperature Storage Temperature Humidity -40 ~ 85 degrees C 5 ~ 95% (non-condensing) Drawing Rear View Top View Side View Side View CAUTIO Front View Dimensions (unit = mm) Ordering Information Industrial L2+ 24-Port 10/100/T 802.3at + 4-port shared 100/X SFP Managed Switch (-40~75 degrees C) iederlassung Österreich 8

9 Available Modules for Gigabit Ethernet Transceiver (BASE-X SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp. MGB-GT Copper m -- MGB-SX LC Multi Mode 550m 850nm MGB-SX2 LC Multi Mode 2km MGB-LX LC Single Mode 10km MGB-L30 LC Single Mode 30km MGB-L50 LC Single Mode 50km MGB-L70 LC Single Mode 70km MGB-L120 LC Single Mode 120km MGB-TSX LC Multi Mode 550m 850nm MGB-TLX LC Single Mode 10km MGB-TL30 LC Single Mode 30km MGB-TL70 LC Single Mode 70km Gigabit Ethernet Transceiver (BASE-BX, Single Fiber Bi-directional SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp. MGB-LA10 MGB-LB10 MGB-LA20 MGB-LB20 MGB-LA40 MGB-LB40 MGB-LA60 MGB-LB60 MGB-TLA10 MGB-TLB10 MGB-TLA20 MGB-TLB20 MGB-TLA40 MGB-TLB40 MGB-TLA60 MGB-TLB60 WDM(LC) Single Mode 10km WDM(LC) Single Mode 20km WDM(LC) Single Mode 40km WDM(LC) Single Mode 60km WDM(LC) Single Mode 10km WDM(LC) Single Mode 20km WDM(LC) Single Mode 40km WDM(LC) Single Mode 60km Fast Ethernet Transceiver (100BASE-X SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp. MFB-FX 100 LC Multi Mode 2km MFB-F LC Single Mode 20km MFB-F LC Single Mode 40km MFB-F LC Single Mode 60km MFB-F LC Single Mode 120km MFB-TFX 100 LC Multi Mode 2km MFB-TF LC Single Mode 20km 13100nm Fast Ethernet Transceiver (100BASE-BX, Single Fiber Bi-directional SFP) Model Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (TX) Wavelength (RX) Operating Temp. MFB-FA20 MFB-FB20 MFB-TFA20 MFB-TFB20 MFB-TFA40 MFB-TFB WDM(LC) Single Mode 20km 100 WDM(LC) Single Mode 20km 100 WDM(LC) Single Mode 40km iederlassung Österreich