Release Notes for Cisco MURAL Software Version 4.2

Transcription

1 Release Notes for Cisco MURAL Software Version 4.2 Software version 4.2 February 8, 2018 The information contained in this document applies to Cisco MURAL. This software release is identified as Cisco MURAL software version 4.2 Contents This document contains the following sections: Introduction, page 2 System Requirements, page 2 Enhancements in This Release, page 3 Release Contents, page 4 Installing Software Patches, page 5 Resolved Issues, page 5 Known Issues, page 7 Americas Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA USA 2016 Cisco Systems, Inc. All rights reserved.

2 Introduction Introduction Mobility Unified Reporting and Analytics (MURAL) provides reporting and analytics for deep packet inspection (DPI) data emerging from your network, including scheduled offline reports. The MURAL user interface provides visualization of network traffic analysis, content distribution analysis, device traffic distribution and reporting for BulkStats and key performance indicators (KPIs). The Cisco MURAL application is centrally deployed on a redundant pair of UCS 5108 Blade Server Chassis. Each chassis includes nodes called Collector (collects data streams), Compute (analyzes and aggregates data), Insta (stores and manages processed data) and UI/Caching (responds to requests from the user interface). An ASR 5000 or ASR 5500 platform feeds network data to the MURAL Collector node. External storage of both raw and computed data is hosted on EMC storage devices. MURAL supports bulkstat versions 15.0, 16.0, 17.0, 18.0, 19.0, 20.0, 21.0, 21.1 and The release is generically applicable for all MURAL deployments. This release additionally provides central deployment of Cisco MURAL on UCS-C rack servers with internal storage for smaller deployments. System Requirements Cisco MURAL can be hosted on UCS 5108 Blade Server chassis specifically allocated to and configured for MURAL. An EMC VNX external storage system is also specifically allocated to and configured for MURAL. For smaller deployments, Cisco MURAL can also be hosted on UCS- C 240M3 and C460 rack servers. Refer to the Bill of Materials for a complete list of hardware components required. Release Notes for Cisco MURAL Software Version /02/18

3 Enhancements in This Release Enhancements in This Release This section lists new features that have been implemented in this software release. 1. TLS-SNI report Enhancement Gateway name is added in existing tls-sni csv report. System user can turn off its emission in generated output using config file. Note: Gateway name is being fetched from EDR filename as currently for other Mural applications. 2. RuleDef Report A new csv report is added in Mural system to provide per ruledef name per APN distribution. Following are the parameters in report Ruledef Name, APN, Total Tonnage, Uplink Tonnage,Downlink Tonnage, Subscriber Count, Total Flows Note: To generate RuleDef report, sn-ruledef-name should be added in ASK5K EDR Flow config. 3. p2p IB update based on ADC P2P added in Cisco ADC plugin have been included in Mural IB. Release Contents For ease of understanding, installation instructions have been provided in the following guides based on the deployment scenario: For complete fresh installation instructions, please refer to the Cisco MURAL Installation Guide. For Upgrade installation, please refer to the Cisco MURAL Upgrade Installation Guide. Media File name MD5SUM Release ISO mfgcd-atlas4.2.rc1.iso 571dd89a91b9b5a99a493304e778866e Patches (Copy under./patches/4.2.rc1.p1.tgz c642b4c279eedca31fe6faf Release Notes for Cisco MURAL Software Version /02/18 3

4 Installing Software Patches /data/tmp_patch directory) Release IMG (Only for Upgrade) image-atlas4.2.rc1.img 5a522971ebbd5cf def29fea Monitoring interface package pkg_dashboard.tgz 79b6f9a1b81eeaa8ba49e7c8c3edb28b MIBs mibs/ 67 files VM images datafs.vmdk.gz 5f881a468d82b9fa0e70b90fee9dbf0e VM images rootfs.vmdk.gz f2ec9731e51ac60dd9f838dd26fe5722 VM images vmtemplate.zip 4355a8faabd4d dddef7abbcb0 Installing Software Patches Follow the instructions in the installation guide and refer to these release notes for patch installation on each node of the system. You must copy the installation patches to the GMS server and apply them to the all nodes at the correct points in the installation procedures, as described in the following sections. 1. As a pre-requisite to install patch on the GMS node, ensure that master GMS node is running with 4.2.rc1 image and is accessible. 2. Download the 4.2.rc1.p1.tgz patch from the FTP server on the /data/tmp_patch directory on GMS node. The md5sum of the patch is c642b4c279eedca31fe6faf. 3. Execute the following commands to apply patches on Master GMS node: >en #_shell pmx subshell patch pm extension (patch)> fetch /data/tmp_patch/4.2.rc1.p1.tgz pm extension (patch)> install patch 4.2.rc1.p1 4. Ensure that you meet the following prerequisites to install patch on all the nodes: a. Ensure that all the nodes in the setup are running with 4.2.rc1 image. b. In case of fresh instllation, ensure that the patch is applied after hardware installation is completed that is all the machines are accessible before creating GMS application xml. Release Notes for Cisco MURAL Software Version /02/18

5 Resolved Issues 5. Execute the following commands to Apply patches from Master GMS node to all nodes: >en #_shell pmx subshell patch_management pm extension (patch management)> set gms-file /config/gms/activeconfiguration/resolved_active.xml pm extension (patch management)> fetch /data/tmp_patch/4.2.rc1.p1.tgz pm extension (patch management)> install patch 4.2.rc1.p1 at all 6. Follow the steps mentioned in install guide after applying the patch on all nodes. Resolved Issues Issue ID Description MUR-2471 Upgrade - CleanupOutput job fails after upgrade from 4.0 to 4.1 MUR-2153 MUR-1590 GMS Lite is setting GMS VIP as PXE boot server, should be local IP of Master GMS only. KPIRulebook is not correct in 4.1 release MUR-2451 MUR-2490 MUR-2539 MURAL Utility to encrypt/decrypt SubscribeID is missing The OutboundRoamerSp report does not have SP column in the output csv Verizon Tethering - Offline APN report is failing when uplink/downlink tonnage is zero Release Notes for Cisco MURAL Software Version /02/18 5

6 Known Issues Known Issues Issue ID MUR-2562 Description Trending and Monitoring screen not showing top 10 values for selected dimension for selection measure MUR-2563 MUR-2475 MUR-2464 Mural Documentation: spacing /new line issue Uncategorized tls-sni not coming in uncategorized report Quick time range selector value is not readable for yesterday MUR-2441 MUR-2310 MUR-2426 MUR-2413 ModelD - There should be some way of cleaning previously learned tac,os signature in db Workflow show SubscriberID masked but Report shows full numbers Error scenario ModelD - Proper logging message in case of no data and just _DONE file in input Enhancement: Model-D Job doesnt support deployment in distributed mode Related Documentation In addition to this document, the MURAL documentation set includes the following: MURAL User Guide MURAL Software Installation Guide MURAL Upgrade Guide MURAL Software Installation Guide for Rack Servers MURAL Software Installation Guide for VMWare Environment MURAL Operations and Troubleshooting Guide Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company Cisco Systems, Inc. and/or its affiliated entities. All rights reserved. Release Notes for Cisco MURAL Software Version /02/18