FC Type Connector. Standards YD/T IEC GR-326-CORE
|
|
|
- Maximilian Holt
- 5 years ago
- Views:
Transcription
1 FC Type Connector Product Introduction Optical Fiber Jumper is the cable with a connector installed on its each end respectively to make the jumping connection of light path. Features Standard metal parts, good interchangeability Φ2.5mm ceramic ferrule, PC, UPC and APC polishing Cable type:φ0.9mm, Φ2mm, Φ3mm Low insertion loss, high return loss Superior repeatability High stability and reliability Applications FTTx, LANs, PON & Optical CATV Local ring net Optic fiber sensor Optic fiber test equipment Optic fiber telecommunication system Standards YD/T IEC GR-326-CORE Specifications Specification Unit FC/PC FC/UPC FC/APC Insertion Loss Return Loss SM fiber db 0.2dB(L), 0.3(S) MM fiber db 0.1 SM fiber db 55dB(L), 50(S) 60 MM fiber db 36 Repeatability db 0.1 Interchangeability db Connection Times >1000 Operation Temperature -40~80 1 /
2 Ordering information OFC- / - / Length:1:1m, customer specify Cable Type:09:φ0.9mm,20:φ2.0mm, 22:φ2.0mm zipcord duplex,30: φ3.0mm,33:φ3.0mm zipcord duplex Fiber Type:S:G.652,A2:G.657A2,B:G657B,M:Multimode (50/5),D:Data(62.5/5),OM3,OM4 Endface2:PC,UPC,APC,0:Pigtail Connector2:FC,SC,SC2,ST,MU,LC,LC2,0:Pigtail Endface1:PC, UPC, APC Connector1:FC,SC,SC2,ST,MU,LC,LC2 2 /
3 SC Type Connector Product Introduction Optical Fiber Jumper is the cable with a connector installed on its each end respectively to make the jumping connection of light path. Features Push-pull type, quick installation and unloading Standard plastic parts, good interchangeability Axial locking switch, connection high stability and reliability Φ2.5mm ceramic ferrule, PC, UPC and APC polishing Cable type:φ0.9mm, Φ2mm, Φ3mm Low insertion loss, high return loss Superior repeatability Applications FTTx, LANs, PON & Optical CATV Local Ring Net Optic fiber sensor Optic fiber test equipment Optic fiber telecommunication system Standards YD/T IEC GR-326-CORE Specifications Specification Unit SC/PC SC/UPC SC/APC Insertion Loss SM fiber db 0.2dB(L), 0.3(S) 3 /
4 MM fiber db 0.1 Return Loss SM fiber db 55dB(L), 50(S) 60 MM fiber db 36 Repeatability db 0.1 Interchangeability db Connection Times >1000 Operation Temperature -40~80 Ordering information OFC- / - / Length:1:1m, customer specify Cable Type:09:φ0.9mm,20:φ2.0mm, 22:φ2.0mm zipcord duplex,30: φ3.0mm,33:φ3.0mm zipcord duplex Fiber Type:S:G.652,A2:G.657A2,B:G657B,M:Multimode (50/5),D:Data(62.5/5),OM3,OM4 Endface2:PC,UPC,APC,0:Pigtail Connector2:FC,SC,SC2,ST,MU,LC,LC2,0:Pigtail Endface1:PC, UPC, APC Connector1:FC,SC,SC2,ST,MU,LC,LC2 4 /
5 ST Type Connector Product Introduction Optical Fiber Jumper is the cable with a connector installed on its each end respectively to make the jumping connection of light path. Features Standard metal parts, good interchangeability Bayonet type connection, quick installation and unloading Φ2.5mm ceramic ferrule, PC, UPC and APC polishing Cable type:φ0.9mm, Φ2mm, Φ3mm Low insertion loss, high return loss Superior repeatability High stability and reliability Applications FTTx, LANs, PON & Optical CATV Local ring net Optic fiber sensor Optic fiber test equipment Optic fiber telecommunication system Standards YD/T IEC GR-326-CORE Specifications Specification Unit ST/PC ST/UPC ST/APC Insertion Loss SM fiber db 0.2dB(L), 0.3(S) 5 /
6 MM fiber db 0.1 Return Loss SM fiber db 55dB(L), 50(S) 60 MM fiber db 36 Repeatability db 0.1 Interchangeability db Connection Times >1000 Operation Temperature -40~80 Ordering information OFC- / - / Length:1:1m, customer specify Cable Type:09:φ0.9mm,20:φ2.0mm, 22:φ2.0mm zipcord duplex,30: φ3.0mm,33:φ3.0mm zipcord duplex Fiber Type:S:G.652,A2:G.657A2,B:G657B,M:Multimode (50/5),D:Data(62.5/5),OM3,OM4 Endface2:PC,UPC,APC,0:Pigtail Connector2:FC,SC,SC2,ST,MU,LC,LC2,0:Pigtail Endface1:PC, UPC, APC Connector1:FC,SC,SC2,ST,MU,LC,LC2 6 /
7 MU Type Connector Product Introduction Optical Fiber Jumper is the cable with a connector installed on its each end respectively to make the jumping connection of light path. Features Small size( SC 40%), light weight, suitable for high density installation Standard plastic parts, good interchangeability Push-pull type, quick installation and unloading Φ1.25mm ceramic ferrule, PC, UPC and APC polishing Cable type: Φ0.9mm, Φ2mm Low insertion loss, high return loss Superior repeatability High stability and reliability Applications FTTx, LANs, PON & Optical CATV Local ring net Optic fiber sensor Optic fiber test equipment Optic fiber telecommunication system Standards YD/T IEC GR-326-CORE Specifications Insertion Loss Return Loss Specification Unit MU/PC MU/UPC MU/APC SM fiber db 0.2dB(L), 0.3(S) MM fiber db 0.1 SM fiber db 55dB(L), 50(S) 60 MM fiber db 36 7 /
8 Repeatability db 0.1 Interchangeability db Connection Times >1000 Operation Temperature -40~80 Ordering information OFC- / - / Length:1:1m, customer specify Cable Type:09:φ0.9mm,20:φ2.0mm, 22:φ2.0mm zipcord duplex,30: φ3.0mm,33:φ3.0mm zipcord duplex Fiber Type:S:G.652,A2:G.657A2,B:G657B,M:Multimode (50/5),D:Data(62.5/5),OM3,OM4 Endface2:PC,UPC,APC,0:Pigtail Connector2:FC,SC,SC2,ST,MU,LC,LC2,0:Pigtail Endface1:PC, UPC, APC Connector1:FC,SC,SC2,ST,MU,LC,LC2 8 /
9 LC Type Connector Product Introduction Optical Fiber Jumper is the cable with a connector installed on its each end respectively to make the jumping connection of light path. Features Small size( SC 50%), light weight, suitable for high density installation Standard plastic parts, good interchangeability Push-pull type, quick installation and unloading Φ1.25mm ceramic ferrule, PC, UPC and APC polishing Cable type: Φ0.9mm, Φ2mm, Φ3mm Low insertion loss, high return loss Superior repeatability High stability and reliability Applications FTTx, LANs, PON & Optical CATV Local ring net Optic fiber sensor Optic fiber test equipment Optic fiber telecommunication system Standards YD/T IEC GR-326-CORE Specifications Specification Unit LC/PC LC/UPC LC/APC Insertion Loss SM fiber db 0.2dB(L), 0.3(S) MM fiber db /
10 Return Loss SM fiber db 55dB(L), 50(S) 60 MM fiber db 36 Repeatability db 0.1 Interchangeability db Connection Times >1000 Operation Temperature -40~80 Ordering information OFC- / - / Length:1:1m, customer specify Cable Type:09:φ0.9mm,20:φ2.0mm, 22:φ2.0mm zipcord duplex,30: φ3.0mm,33:φ3.0mm zipcord duplex Fiber Type:S:G.652,A2:G.657A2,B:G657B,M:Multimode (50/5),D:Data(62.5/5),OM3,OM4 Endface2:PC,UPC,APC,0:Pigtail Connector2:FC,SC,SC2,ST,MU,LC,LC2,0:Pigtail Endface1:PC, UPC, APC Connector1:FC,SC,SC2,ST,MU,LC,LC2 10 /
11 MPO Type Connector Product Introduction MPO fiber optic connectors offer high-density multi-channel optical connector, low insertion loss, high return loss, high tensile strength, reliability, and other aspects of life in terms of having a greater advantage. Features Low insertion loss High reliability, repeatability and stability High-density, single-core connector 24 MT ferrule with suspended function Guide pin using R chamfered Applications Data Center Communications room High-density optical communications links Standards Telcordia GR-1435 TIA/EIA 604-5,IEC G Fiber Channel Compliant 40G and 100G IEEE Structured cabling per TIA-568-C YD/T MPO Type Specifications Parameter Insertion loss Return Loss Single Mode Multi Mode Unit Standard Loss Low loss Standard Loss Low loss 0.25 Typical 0.15 Typical 0.75 Maximum 0.35 Maximum 45,PC 0.20 Typical 0.10 Typical db 0.50 Maximum 0.30 Maximum 25,PC 55,APC Durability <0.3 change 500 matings <0.3 change 1000 matings db db 11 /
12 Ordering Information OFC Polarity:A:Straight Through,B:Complete Cross, C: Complete Cross Length: 1:1m, customer specify Fiber/Cable:09: Φ0.9mm, 20: Φ2.0mm, 30: Φ3.0mm Fan-out Length:0.5:0.5m,0:No Fan-out Endface:PC,APC Connector Type:Fan-out Type:FC SC LC, 0:Pigtail Fiber Type:S:G.652, A2:G.657A2, B:G657B, M:Multimode(50/5), D:Data(62.5/5),OM3,OM4 MT Type:M:Male F:Fmale MT Endface:PC, APC MT Fiber cores:4:4cores,8:8cores,:cores,24:24cores MT Series:MPO,MTP /
PATCH-CORD. SC Patch-Cord APPLICATIONS AVAILABILITY FEATURES SPECIFICATIONS. Active device termination Local Area Networks (LANs)
SC Patch-Cord APPLICATIONS CATV Metro Test equipment Active device termination Local Area Networks (LANs) Premise installations Telecommunicatio n networks Data processing networks Wide Area Networks (WANs)
SC/APC Connector. CATV Active device Telecommunication. Metro Local Area Data processing
Introduction As the industry s leading supplier of single-mode cable assemblies, Optical Fiber offers the most complete line of connectors and factory-terminated cables. From single-fiber jumpers to high
PREMIUM GRADE PATCHCORD / PIGTAIL
01 Go4Fiber provides the broadest choice of patchcords and pigtails to the industry including LC, SC, FC, ST, E2000 with Ultra-polished (UPC), Angle-Polished (APC) or other polish requirement. With our
PREMIUM GRADE PATCHCORD / PIGTAIL
01 Go4Fiber provides the broadest choice of patchcords and pigtails to the industry including LC, SC, FC, ST, E2000 with Ultra-polished (UPC), Angle-Polished (APC) or other polish requirement. With our
1 : LC/PC 0 : None S : Simplex 09 : 0.9mm G : Green W : White. A : LC/APC S : SM D : Duplex 20 : 2.0mm L : Blue. M : MM 30 : 3.
LC Connector The LC connector was the first small form factor connector on the market. The use of a high performance 1.25 mm ferrule gives the connector extremely high performance characteristics. The
LEAD Fiber Optics PRODUCT CATALOGUE
LEAD Fiber Optics PRODUCT CATALOGUE FIBER OPTIC ATTENUATOR Fixed plug-in type TEL:+886-2-8672-2371 FAX:+886-2-8672-3275 Web:http://www.twfiberoptic.com Fixed plug in type Attenuator Fixed plug in fiber
LEAD Fiber Optics PRODUCT CATALOGUE
LEAD Fiber Optics PRODUCT CATALOGUE OPTICAL TERMINATOR TEL:+886-2-8672-2371 FAX:+886-2-8672-3275 Web:http:// Optical Terminator Optical Terminators are used to terminate unused fiber connector ports in
Ordering Guide of the Single-Mode Connectorized Fiber Cables (Pigtails & Jumpers) and Single-Mode Connector Mating Adapters
Page 1 of 9 Ordering Guide of the Single-Mode Connectorized Fiber Cables (Pigtails & Jumpers) and Single-Mode Connector Mating Adapters This document provides assistance with the selection of single-mode
PLC SPLITTER PRODUCTS
PLC SPLITTER PRODUCTS PLC Splitter Products FIBER OPTIC PRODUCTS PLC SPLITTER PRODUCTS Professional on providing complete, high-performance Optic Communication Components and Premise Distribution Solutions
Data Center & Cloud Computing Infrastructure Solutions DATASHEET. MTP/MPO-LC/SC Cassette High-density Pre-terminated Modular Cassette System
Data Center & Cloud Computing Infrastructure Solutions DATASHEET MTP/MPO-LC/SC Cassette High-density Pre-terminated Modular Cassette System REV.1.0 2018 MTP MPO Cassette 01 Description FS.COM Fiber Optic
SPECIFICATION SINGLEMODE MULTIMODE. Premium Connector 0.08dB Typical 0.15dB Typical Standard Connector 0.12db Typical 0.20db Typical Return Loss
12 FC Connector Best used in single mode applications and known for exceptionally accurate positioning, the FC or Fixed Connection Connector is designed for use in unstable environments because of their
Optical Fiber Systems. Optical Fiber. Premise Connectivity Systems S Y S T E M S
Premise Connectivity Systems Optical Fiber S Y S T E M S w w w. s i g n a m a x. c o m High-Density Rack-Mount Optical Fiber Enclosures Rack-Mount Optical Fiber Distribution Enclosures Rack-Mount Optical
Data Center & Cloud Computing Infrastruture Solutions DATASHEET. Standard Fiber Patch Cable. Make high-speed Ethernet network equipment connections
Data Center & Cloud Computing Infrastruture Solutions DATASHEET Standard Fiber Patch Cable Make high-speed Ethernet network equipment connections 1 Description Fiber optic patch cables are ideal for supporting
Passive components Introduction. Optical Splitters and Couplers. Passive components - Optical Splitters and Couplers
Introduction Optical Splitters and Couplers Today s leading TTH technology is PON (Passive Optical Network) technology. This approach differs from most of the telecommunications networks in place today
Connector SPECIFICATION SINGLEMODE MULTIMODE. 126μm +1/-0 Concentricity: 1μm. 127μm 125μm +1/-0 Concentricity: : 1μm
24 LC-UPC Unibody BTW Boot 2.0mm Round Connector Insertion Loss 0.08dB typical UPC 0.10dB typical APC 0.15dB typical 0.04dB typical Super Low Loss 55dB typical UPC 65dB typical APC Durability < 0.2dB typical
CONNECTOR SOLUTIONS. FASTConnect FUSEConnect Field Master
CONNECTOR SOLUTIONS FASTConnect Provide some of the fastest terminations in the industry Does not require a crimp or special assembly tools Mechanical, true no epoxy/no polish (NENP) connectors FUSEConnect
Telecommunication Products
Telecommunication Products Media Converters Couplers / Splitters WDM CWDM Telecommunication Products Media Converters The media converter is the most economical way to deploy fibre into your network. This
KRONE FiberPLUS Patchcords and Pigtails. Optical fibres with connectors. Ultra-PC Ultra-PC Polishing P olishing
KRONE FiberPLUS Patchcords and Pigtails now now available av ailable with with Optical fibres with connectors Ultra-PC Ultra-PC Polishing P olishing SC-SM types of polishing: PC, UPC, APC8, APC 9 PC, UPC:
PLC Splitter, Module/Cassette Type, LIIN25 Features
PLC Splitter, Module/Cassette Type, LIIN25 Features Wide operating wavelength range Good channel-to-channel uniformity High reliability and small size Low Insertion loss and Low PDL Compact Design Good
Optical Splitter for Telecommunication Networks
Introduction: Optical PLC splitter is a passive optical component which have a significant impact on the efficiency of communication network roll-outs especially in FTTx deployment. The incorporation of
ARIADROP: Fiber to the MDU (FTTM)
DROP: Fiber to the MDU (FTTM) 05 Issue BECAUSE PERFORMANCE MATTERS DROP: Fiber to the MDU (FTTM) DROP DS-BS- 04/07/05 Overview Technologies DROP System is designed to provide both labor and material savings
MAP-200 Power Meter Detector Adaptors
Selection Guide MAP-200 Power Meter Detector Adaptors VIAVI Solutions AC Detector Adaptors are designed for use with the VIAVI MAP-200 optical power meters (mopm), return loss meters (morl) and Swept Wavelength
Standard-Area Silicon PIN Photodiodes (500µm)
Standard-Area PD-LD Inc. offers a variety of standard and custom PIN Photodiodes and APDs in fiber coupled packages. The semiconductors offered are of proven manufacture and design. Our Silicon devices
SPEC SHEET. Multimode Patch Cords and Pigtails. Cable types. Description. Features. Fiber types
Multimode Patch Cords and Pigtails SPEC SHEET Description ADC KRONE offers a wide array of multimode fibre optic patch cords featuring Riser and LSZH cables in various diameters. ADC KRONE s multimode
EC Series LC Connectors
EC Series LC Connectors Amphenol s data communications EC Series fiber optic LC small form factor (SFF) connectors utilize the familiar RJ-45 latching mechanism. The LC connector is almost half the size
TELFOCAB. Enginerred To Make Your Network Better. Fiber Optic Connectivity. Copper Connectivity. Cable. Rack Cabinet
Enginerred To Make Your Network Better Fiber Optic Connectivity Copper Connectivity Cable Rack Cabinet P R O D U C T OVERVIEW 2018 Fiber Optic Connectivity Copper Connectivity Cable Rack Cabinet TABLE
FEATURED PRODUCTS SC & LC MINI BOOTS LC-HD TOP ADAPTER XP-SERIES LC SWITCHABLE UNIBOOT IP-SERIES LC-KEYED FLEX BOOTS PLC-WDM
LC-HD FEATURED PRODUCTS SC & LC MINI BOOTS SC & LC TOP ADAPTER IP-SERIES LC SWITCHABLE UNIBOOT XP-SERIES LC-KEYED SC & LC FLEX BOOTS PLC-WDM LC-HD CONNECTOR LC HD HIGH DENSITY CONNECTOR The SENKO LC-HD,
LX.5 (SFOC 1.25) High packing density. High performance. High reliability. High safety. High flexibility
Today, packing density is more important than ever. The LX.5- connector, based on the proven 1.25 mm ferrule technology, is the only standardized small form factor connector combining high packing density,
LC Connectors and Adapters
, Adapters and Cable Assemblies meet the growing demand for small form factor, high-density fiber optic connectivity with simplex, duplex, singlemode and multimode options LC connectors reduce space requirements
INTERCONNECT CATALOGUE
INTERCONNECT CATALOGUE SENKO Advanced Components is a recognized leader in the design, manufacturing, sales, marketing and distribution of over 1000 fiber optic products for the global telecom and datacom
FIBER OPTIC CONNECTORS AND ADAPTERS PRODUCTS OVERVIEW
FIBER OPTIC CONNECTORS AND ADAPTERS PRODUCTS OVERVIEW Engineered by Imagination Suncall Corporation was established in 1943 based on the principles of emphasizing function and precision. We strive to continually
State-of-the-Art and direction for high density optical fiber interconnects
State-of-the-Art and direction for high density optical fiber interconnects Bill Blubaugh, Toshiaki Satake US Conec Ltd. April 18, 2007 We develop, manufacture and market high density optical interconnect
MTP/MPO Cable Assemblies
MTP/MPO Cable Assemblies MTP cable assemblies are multi-fiber patch cords suitable for high-density back plane and PCB solutions. MTP brand Fan-Out, Interconnect and Trunk cable offer up to 36 times the
DIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS F-3 Simplex PC/APC MULTIMODE PC Telecommunications and Fiber Optics are developing at an incredible speed. To keep up with tomorrow s requirements
Pre-terminated Multi Fibre Cable Assemblies
AFL manufactures a broad range of factory terminated and tested multi-fibre cable assemblies. These assemblies are available in various fibre types and counts, cable constructions and connector options.
CWDM Passive Optical Add/Drop Multiplexers
Data Center & Cloud Computing DATASHEET CWDM Passive Optical Add/Drop Multiplexers Data Center & Cloud Computing Infrastruture Solutions REV.1.0 2017 CWDM Passive Optical Add/Drop Multiplexers 01 Overview
Clearview Cassette. Clearview Blue
Application The Clearview Blue provides 12-24 ports of connectivity, scaling one cassette at a time, for patch and splice (Clearfield s in-cassette splicing solution), patch only (stubbed) or plug-and-play
Product Catalogue. Fibre Optic Components
Product Catalogue Fibre Optic Components version 2017 Empowering businesses through innovative network solutions. We have been pushing boundaries and providing innovative products and solutions to clients
Our Most Important Connection is with You. OSIS SECTION 7. OSIS Series
SECTION 7 OSIS OSIS Series Contents Introduction : One Step Interconnect Solution...7-3 Applications...7-3 International Standard Documents Compliance...7-3 Features and Benefits...7-3 Characteristics
Connectors Adapters Pigtail & Patch Cord...4-9
Connectors...4-1 Adapters... 4-6 Pigtail & Patch Cord...4-9 4-1 Connectors SC connector assembly instruction 4-2 Connectors FOCSC Fiber optical connector FOCSC-MC3BPB101 FOCSC-SA3YP9101 FOCSC-MC0BP9101
A Division of Castle Microwave. Fibre Products.
A Division of Castle Microwave Fibre Products www.castlemicrowave.com www.castlecables.co.uk Interconnect Products Global No 1 supplier in quantity for LC Product. Standard Connectors & Adapters Small
LC Adapters and Cable Assemblies
LC Adapters and meet the growing demand for small form factor, high-density fiber optic connectivity with simplex, duplex, single-mode and multimode options. LC connectors reduce space requirements by
Optic Components - Adapters. Adapter FC-Type. Applications: CATV LAN & WAN Network Broadband FTTx. Specification
Adapter FC-Type Applications: CATV LAN & WAN Network roadband FTTx euroclust offers a full line of fibre optic adapters for every application including flanged threaded, metal, composite and hybrid or
FMT4S. High Density Connectivity Solution
FMT4S High Density Connectivity Solution 2 FMT4S Solution Illustration FMT4S Optical Distribution Frame (ODF) FMT4S series is an advanced ODF series offering premium quality Data Center connectivity solution.
13-SDMS-01 REV SDMS-01, REV.00 SEC DISTRIBUTION MATERIALS SPECIFICATION DATE: G
13-SDMS-01 REV. 00 SPECIFICATIONS FOR FIBER OPTIC CONNECTIVITY COMPONENTS (PATCH CORDS, PIGTAILS, FAN-OUT CABLES AND CONNECTORS FOR INTERNAL INSTALLATIONS) This specification is property of SEC and subject
OAsys. 24 Fibre Swing Out Splicing and Patching Shelf. Rack Mounted Products. Features and Benefits. Prysmian Part Numbers: See Table on page 3
Fibre Swing Out Splicing and Patching Shelf Prysmian Part Numbers: See Table on page 3 Picture shows shelf fitted with one FC panel and one SC panel The OAsys Fibre Swing Out Splicing and Patching Shelf
Set up Patchcord Production Line
1 Set up Patchcord Production Line We can do as follows: 1. Help customers set up Patchcord Production Line to assemble fiber optic connectors and manufacture fiber optic patchcord/pigtail. 2. Provide
DIGITUS Fiber Optic Splice Box, 1U, basic housing, color grey (RAL 7035) or black (RAL 9005)
DIGITUS Fiber Optic Splice Box, 1U, Basic Housing Basic housing for splice box assembly Sturdy housing Sliding Available in colors grey and black Abstract DIGITUS Fiber Optic Splice Box, 1U, basic housing,
F-3000 connector family SFF reliable optic connections.
F-3000 connector family SFF reliable optic connections. Outline Standard product and versions The F-3000 r and rs Available technologies and standards The F-3000 fusion 2 The connector 3 Features and benefits
DIAMOND Fiber Optic Components
DIAMOND Fiber Optic Components CABLE ASSEMBLIES AND ADAPTERS MFS & Fan-Out cords PC/APC MULTIMODE PC The Diamond Multiple Fiber System (MFS)combines Diamond`s advanced polishing technology and the flexibility
Detectors for Fiber Optics: InGaAs PIN Photodiodes
PD-LD Inc. offers a variety of standard and custom PIN Photodiodes and APDs in fiber coupled packages, of proven manufacture and design. Our InGaAs devices are optimal from 1100 to 1650nm, and are available
Agilent Lightwave Solution Platform
Agilent Lightwave Solution Platform Configuration Guide May 2005 This guide provides configuration details for the Agilent 816xB family of mainframes and modules, including options and accessories. 8163B
Rack Mounted Products
SRS3000 1U Patch Only Shelf Prysmian Part Number: See table on following pages. The SRS3000 Patch Only Shelf is a modular unit available in a variety of configurations for integration in to 19 and ETSI
DATA SHEET. PON Optical Splitters. Splice Tube, Flange, Flat Box, ODF and Rack Mount Types PLC OPTICAL SPLITTERS. Overview. Application.
PON Optical Splitters Splice Tube, Flange, Flat Box, ODF and Rack Mount Types Overview Planar Lightwave Circuit (PLC) optical splitters provide best performance being fabricated using silica optical waveguide
FIBRE OPTIC ENCLOSURES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU
FIBRE OPTIC ENCLOSURES SYDNEY MELBOURNE BRISBANE PERTH JCSTECH.COM.AU FIBREOPTIC RACK MOUNT ENCLOSURE: FIXED The JCS Technologies fixed rack mountable fibreoptic break out enclosure is suitable for patching
Data Center & Cloud Computing Infrastruture Solutions DATASHEET. MTP/MPO-LC Breakout Cable Aseemblies High Density Cabling System
Data Center & Cloud Computing Infrastruture Solutions DATASHEET MTP/MPO-LC Breakout Cable Aseemblies High Density Cabling System REV.2.0 2018 MTP/MPO Breakout Cable 01 Description MTP/MPO breakout assemblies
A wide range of connectors are available to fit very specific needs.
By Larry Johnson In all fiber optic systems, it is necessary to join two fibers together with low signal attenuation while maintaining low reflection levels depending upon the type of system used. Fiber
HDCi LX3 High Density 1U Patch Panel
HDCi LX3 High Density 1U Patch Panel An innovative 1U, 19 rack mountable patch panel, designed for use in high density applications. It offers management of up to 144 fibres using MTP optical cassette
Fiber Inspection Tips and Adapters
Selection Guide Fiber Inspection Tips and Adapters VIAVI Solutions VIAVI Solutions offers a wide variety of fiber inspection tips and adapters to help you Inspect Before You Connect and work clean. Browse
FIBER OPTIC SPLITTERS
FIBER OPTIC SPLITTERS turksat.com.tr SPLITTERS FIBER OPTIC SPLITTERS SPLITTERS FEATURES APPLICATION» Optical performance 100% factory tested» Fiber to the home (FTTH)» UPC, and APC polish types available
Product Description. Features & Benefits. Multilink Inc All Rights Reserved. Removable Seal Window Opening:
SFX-0 Single In Line Fiber Optic Splice Enclosure 020-234-10 Product Description The Starfighter Xpress comes from a heritage of proven and established in-line splice enclosures that are tested in accordance
OSIS by Radiall One Step Interconnection Solution
FIBER OPTIC AND MULTISIGNAL APPLICATIONS OSIS by Radiall One Step Interconnection Solution Introduction The easiest outdoor interconnection solution: in only one click! To meet the requirements of telecommunication
FUSION SPLICERS Splicing Made Easy and Affordable
PRODUCTS 2018 FUSION SPLICERS Splicing Made Easy and Affordable Ilsintech s fiber optic fusion splicers provide best-in-class optical performance with a simplistic design, making installs for any application
Rack Mounted Products
SRS4000 Distribution Sub-Rack Prysmian Part Number: See Below The SRS4000 Distribution Sub-Rack is a modular sub-rack available in a variety of configurations for integration into 19 / ETSI / ANSI racks,
C o n n e c t o r s C h a p t e r 183
Connectors Chapter 5 183 Connectors Contents Copper RJ45 FAMILY 700A8 185 LC FAMILY LC Connectors 186 LazrSPEED 189 LC Couplings 190 SC FAMILY SC Connectors 191 SC Connector Clip 192 SC Couplings 193 ST
Plug & Play Universal Harness, SMF-28 Ultra Single-mode (OS2)
Plug & Play Universal Systems Harnesses have a pinned (male) MTP connector on one end that connects to a Plug & Play Universal Systems trunk or extender trunk, while the other end is equipped with single
C2LINX. Ordering Guide
Ordering Guide Table of Contents Overview... 3 Key Benefits... 3 Panels... 3 Section One: Chassis... 4 Section 3: Trays... 5 Section 4: Modules... 6 a. Patch... 6 b. Patch and Splice... 7 c. Pre-terminated
INTERCONNECT CATALOGUE EDITION 2.1
INTERCONNECT CATALOGUE EDITION 2.1 STANDARD CONNECTOR SERIES pg. 04 SMALL FORM FACTORS pg. 24 SPECIALTY PRODUCTS pg. 40 FERRULES AND SLEEVES pg. 48 POLISHING SYSTEMS pg. 54 STANDARD CONNECTOR SERIES SC-UPC
LX3 High Density LGX 1U Patch Panel
LX3 High Density LGX 1U Patch Panel An innovative 1U, 19 rack mountable patch panel, designed for use in high density applications. It offers management of up to 144 fibres using MTP optical cassette modules
FTTX Fiber Optic Cabinet Packages Priority Electronics USA
Priority Electronics USA Priority Electronics Ltd Application Hoffman FTTX enclosures are designed to protect and manage fiber optic cable for broadband delivery in outdoor applications. Constructed with
Heat-Cure Single-Fiber Connectors A LANscape Solutions Product
Applications Field or factory installations requiring high optical performance Cable Assembly House, OEM and Manufacturing Environments Multiple terminations where material cost is the main consideration
FTTH SOLUTION. Content. Contral. Apartment. house. house 13P. 11P Adapter 11P 10P 11P 13P 13P. 10P Mechanical Splice 11P 10P 11P 14P 10P.
FTTH SOLUTION OLT 9P Contral Office V-ONT FDF 10P 6P Sleeve PLC Splitter Apartment ONT 2.5G SFT 8P Patchcord V-ONT Optical hub 12P Cross Tap Fiber Closure 11P Field Installable 13P Connector Plier house
STAR. Data Center High Density Connectivity Solution
STAR Data Center High Density Connectivity Solution 2 STAR Solution Illustration Reach for the STAR: Data Center Connectivity that achieves new heights! Fibernet is proud to introduce the new STAR series,
FTTH Fusion SOC / MPO / Patch Cord
/ MPO / Patch Cord Fusion Splice point Boot Life-span: 15 years Maintenance-Free Economical MPO Patch Cord Discover the difference, Unlike any other! Field installable Fusion Splice-on Connector Ilsintech's
HDCi LX3 High Density 4U Patch Panel
HDCi LX3 High Density 4U Patch Panel An innovative 4U, 19 rack mountable patch panel, designed for use in high density applications. It offers management of up to 576 fibres using MTP optical cassette
INTERCONNECT CATALOGUE EDITION 2.1
INTERCONNECT CATALOGUE EDITION 2.1 STANDARD CONNECTOR SERIES pg. 02 SMALL FORM FACTORS pg. 22 SPECIALTY PRODUCTS pg. 38 FERRULES AND SLEEVES pg. 46 POLISHING SYSTEMS pg. 52 STANDARD CONNECTOR SERIES SC-UPC
UniCam High-Performance Connectors, Multimode and Single-Mode
Features and Benefits Broad operating temperature (-40 to +75 C) Utility and flexibility Factory-polished end face Consistent optical performance Fast termination and no consumables Low installation cost
PCS PATCH CORD SOLUTIONS PATCH CORD SOLUTIONS
Structured Cabling Solutions PCS PATCH CORDS. HiPerlink 6 Colored Patch Cords- 35,36 HiPerlink 1000 Category 5e Colored Patch Cords- 35,36 Snap-in Icons 36 ScTP Category 5 Patch Cord 37 Category 5 Colored
LC Connector. A High Density Fiber Optic Network Solution. Paul Kolesar Lucent Technologies, Bell Laboratories
A High Density Fiber Optic Network Solution Paul Kolesar Lucent Technologies, Bell Laboratories IEEE 802.3z Gigabit Ethernet March, 1997 Outline Design Background and Goals Product Family Overview Features
Siemon PON Fiber Cabling Solutions
Siemon PON Fiber Cabling Solutions WWW.SIEMON.COM 8 Siemon Enterprise PON Fiber Cabling Solution Siemon Enterprise Passive Optical Network (PON) Fiber Cabling Solution improves the modularity, flexibility
Single Stage Isolator
Single Stage Isolator 1.Description: Single stage isolator is a kind of the optical passive device, its basic function is to realize the positive transfer optical signal, and inhibit reverse light. 2.Features:
003 Cords & Cables With Optical Connectors
I : Optical Connectors 002 Connectors NMulti-fiber optical connector NField installable optical connector NBackplane connector NMechanical splices NMulti-fiber connectorized cords NConnectorized optical
COMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET CONNECTORS, FIBER OPTIC, SINGLE FIBER, SMALL FORM FACTOR, LC TYPE
METRIC A-A-59940/ 9 ovember 203 COMMERCIAL ITEM DESCRIPTIO SPECIFICATIO SHEET COECTORS, FIBER OPTIC, SIGLE FIBER, SMALL FORM FACTOR, LC TYPE The General Services Administration has authorized the use of
Section 28 Fiber Optics: Fiber Distribution Cabinets and Accessories
Fiber Optics: Section 28 Section 28 Fiber Optics: Fiber Distribution Cabinets and Accessories Table of Contents Page COYOTE Axcess Solutions COYOTE Pre-Terminated Cabinets Wall Mount...28-2 Rack Mount...28-2
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
Planar Lightwave Circuit (PLC) Splitter, 1x4, 1x8, 1x12 and 1x16 Configurations in PEACOC Flexible Tray
FEATURES: Telcordia GR-1221 Compliant Patented accessibility; easy, fast and accurate Low Insertion Loss Up to 24 simplex LC connectors per tray or 12 SC Simplex Connector Excellent Uniformity Low PDL
Dual Stage Isolator. 1.Description:
Dual Stage Isolator 1.Description: Dual stage isolator is a kind of the optical component, its basic function is to realize the positive transfer optical signal, and inhibit reverse light. 2.Features:
Sino Fibre Optic Co.,Limited Email:sales@sinofibreoptic.com Tel: 86.755.2717.7136 Fax: 86.755.2717.7105 www.sinofibreoptic.com 6th Floor,Blvg B, HengBang Tech Park, 1th LouCun Ind Area, Guangming District,
FO-Technology. FO-Technology. Chapter-Content. - Page 1.
3.0 Chapter-Content Page 3.0 Overview 2 3.1 FO-Through-Adapter 4 3.2 FO-Patch Cords 6 3.3 FO-Splice Modules and Accessories 8 3.4 FO-Splice Trays 10 3.5 FO-Wall Outlets 12 3.6 FO-Indoor Distributors 13
LightBend TM Dual 2x2 Bypass Multimode Fiberoptic Switch
(Bidirectional) (Protected by U.S. patent 6823102 and pending patents) Features Low Optical Distortions 8 Ports Integration High Isolation High Reliability Fail-Safe Latching Epoxy-Free Optical Path Low
Introduction to optical fibers and their applications
Introduction to optical fibers and their applications Felix Donkers Oct, 2008 (draft v0.1) Outline Introduction Optical fibers, patch cords and cables Optical fiber termination and alignment Application
MPO LGX Cassette Module
DATASHEET Product updated on November 19, 2018 MPO LGX Cassette Module MPO LGX Cassette Modules provide secure transition between MPO and LC or SC discrete connectors. They are used to interconnect MPO
EDGE Solutions Trunk Cable, SMF-28 Ultra OS2, MTP to MTP, 12 fibres
EDGE MTP trunks are preterminated cables with 12 -fibre MTP connectors or LC duplex connectors on either side. The trunks build up the major skeleton of the passive network infrastructure, and thanks to
FC Type Fiber Optic Connectors
FC Type Fiber Optic Connectors HRFC Series MU SC FC Features 1. JIS, IEC standards compliantand and fully intermateable with NTT's FC products. JIC C 597 (F1 type fiber optic connectors). IEC 61754-13
POL-001 Fiber-Optic In-Line Polarizer. Operation Manual
POL-001 Fiber-Optic In-Line Polarizer Operation Manual Feb. 18, 2002 General Photonics Corp. Ph: (909) 590-5473 5228 Edison Ave. Fax: (909) 902-5536 Chino, CA 91710 USA www.generalphotonics.com Document
CONTENTS. Introduction Characteristics Product range. Pages
R2CT TM Series R2CT CONTENTS R2CT TM Pages Introduction... 9-4 Characteristics...9-5 Product range R2CT TM standard plug kit...9-6 R2CT TM mini short plug kit... 9-7 R2CT TM standard receptacle...9-8 R2CT
CWDM Module 1. Features
CWDM Module 1. Features Low Insertion Loss High Isolation Low PDL Compact Design Good Channel-to-channel Uniformity Wide Operating Wavelength: 1260nm~1620nm or 1460nm~1620nm Wide Operating Temperature:
SLD Drive SLD. Board FC/APC Connector. TEC Control. Board. Control Circuits. Control interface DB9 (Female)
Product Specification, Revision 1.0 SLD Light Source Module Part Number: IPSDS0902-1. Configuration SLD Drive Board SLD TEC Control Board FC/APC Connector Control Circuits Control interface DB9 (Female)
SM 126μm SM 125.5μm MM 230μm MM 144μm
LC PREMIUM Connector 931, 932 Series LC PREMIUM UNIBODY GR 326 CERTIFIED 900µm MINI Boot CONNECTOR FERRULE TYPE HOUSING BOOT TYPE BOOT COLOR 931 LC Unibody Simplex 153 SM: Premium 125µm 1 SM: Blue B MINI
Pretium EDGE Solutions Harness, 12 fibres,
Corning Cable Systems LANscape Pretium EDGE (Evolved -Density, Growth -Enabled) Solutions are high density pre -terminated optical cabling systems that simplify installation and improve performance in