iswitch imotor Compact QR
|
|
- Beryl Nelson
- 5 years ago
- Views:
Transcription
1 PRODUCT DATA SHEET iswitch imotor Compact QR Features: Compact design Fit for purpose Suitable for 2 feeder switches Quick Release for manual operation High operation torque Operation monitoring (max. torque + time) Operation temperature: -30 C to 70 C Enclosure: IP66 Plugs for all inputs / outputs Auxiliary I/O (user configurable) RS485 interface (Modbus) RS232 interface (Modbus) RTU interface (Potential free I/O) USB 2.0 interface for PC setup Options: Gas pressure (SF6) monitoring Lid sensor Fault passage indicator interface (RS485 or digital input) Flexible shaft in various lengths Adaptation kit on requests Usage: Motorisation for medium voltage switchgear The imotor Compact is a product of the iswitch family. The imotor Compact with Quick Release is specially designed for switchgear where there is limited space for adaptation. The Quick Release makes it possible to performe a manual operation. When using an imotor Compact in combination with LINAK icom and battery a complete nonintrusive switchgear automation kit is available.
2 Technical specifications: Item Specification Comment General features: Switching torque Max. 120 Nm Switching angle Max. 340 (deadband 20 ) Multiple turns possible Velocity Approx. 10 /sec Load depended Lifetime Designed for 1000 operations ON OFF - ON Dutycycle Max. 10% Quick Release 100 times at full load Used for manual operation 2000 times at no load Enclosure IP66 Aluminum housing Operation temperature -30 C to 70 C Storage temperature -40 C to 85 C I/O plugs LINAK Minifit/Microfit See plug definition below Power supply: Input voltage 24 VDC, max. 32 VDC, min. 18 VDC Input current Nominal 10A, peak 15 A in 2.5 sec At max. switching torque Power consumption Min. 60 ma, idle mode No additional sensors Fuse protection 20 A external fuse recommended Power output: Sensor supply 24 VDC, isolated, 350 ma nominal Max. 50 ma each sensor Load protection Polyfuse on each output I/Os Digital input: 8 Digital input (4 plugs) ie. - Earth switch indicator - Lid indicator - Gas pressure indicator - FPI All digital inputs are galvanically isolated. Input power supply: 24 VDC ± 5% Analogue input 4 x 4-20 ma SubD 25, see list below Digital input 8 x Digital input Galvanically isolated I/O s SubD 25, See list below Digital output 7 x Digital output Galvanically isolated I/O s SubD 25, See list below Bus communication RS485, Modbus See list below icom interface RS232, Modbus See list below RTU interface Either RS232/RS485 or digital I/O See list below USB interface Setup and service interface (for PC) CompactLink PC tool required
3 Plug definition/layout: Front view Rear view Connector Name Description Plug type 1 Position sensor Gear 1 Open/Close switch indication Microfit 2 USB interface For connection of a local PC USB - Minifit 3 Position sensor Gear 2 Open/Close switch indication Microfit 4 RS232/RS485 interface Serial Modbus interface Microfit 5 2 x Digital input Configurable inputs Microfit 6 2 x Digital input Configurable inputs Microfit 7 2 x Digital input Configurable inputs Microfit 8 2 x Digital input Configurable inputs Microfit 9 Auxiliary I/O interface See list below SubD VDC Power supply Nominal max. 15A Minifit Auxiliary I/O definition Function Pin No. Type + INPUT COMMON 5 Input Input 1 18 Input Input 2 6 Input Input 3 19 Input Input 4 7 Input Input 5 20 Input Input 6 8 Input Input 7 21 Input Input 8 9 Input Function Pin No. Type OUTPUT COMMON 13 Output Output 1 22 Output Output 2 23 Output Output 3 24 Output Output 4 25 Output Output 5 10 Output Output 6 11 Output Output 7 12 Output Analogue input 1 BN+ 1 Input Analogue input 1 BN- 14 Input Analogue input 2 BN+ 2 Input Analogue input 2 BN- 15 Input Analogue input 3 BN+ 3 Input Analogue input 3 BN- 16 Input Analogue input 4 BN+ 4 Input Analogue input 4 BN- 17 Input
4 Special Features The imotor-compact is designed to control and monitor a wide variety of MV Distribution Switchgear including oil-filled / SF6 insulated Switchgear, Manual/Mechanical Air Break Switches and Ground Mounted Switchgears. The product range provides an easy adaption of existing manually operable Switchgear and combines modern technologies to provide a remotely operable intelligent interface for the modern electrical distribution network. The imotor-compact consists of motor assembly and drive mechanisms (gears) for two feeder switches. When need for automation of more than 2 switch, several imotor-compact can be connected via the RS485 Modbus interface. The iswitch system can default handle up to 8 switches in on system. Functionality The operation of the imotor-compact can be easily adjusted to a specific switchgear. By means of an Open or Close command the imotor-compact will perform a full switching cycle. The current switch position will be indicated and transmitted back to the RTU. Quick Release The imotor-compact is equipped with a hand operated Quick Release to select between Local and Remote operation. In Local mode the Switchgear can be operated manually with the original operation handle. In Remote mode the imotor will performe an automatic switching. Switching sequences Generally, MV Switchgear is operated by turning a handle approximately 90 from Open to Close or vice versa. The compact rotary uses absolute positioning to determine the setup postion for open and closed indications. This simple function is set up via our CompactLink software during setup and commissioning. Instead of a normal switching operation a special switching sequence can be defined. A maximum of five independent steps can be set up in each switching direction. For example a spring charged followed by a shunt activating to switch off (Open) (auxillary switchhes for open/close indication is mandatory for this functionality). Flexible inputs and outputs To allow other use of digital inputs than default, The imotor Compact can be configured for special needs of a customer. All physical inputs can be used for any logical input function such as lid indicator, gas pressure alarm, switch indication, manual stop etc. On the SUB-D connector, a number of outputs and inputs are available. All have default designations, but can from compact.ini be configured to export most Boolean parameters. Fault monitoring The imotor-compact condition is continuously monitored. When a failure has been detected an error is reported. To ensure a proper and safe switching process several parameters and inputs are monitored: Max. current, min. current, operation time, switch position, lid sensor, gas level. Configuration/setup By means of the PC software tool CompactLink the imotor-compact can be configured to a wide range of medium voltage switchgear applications. CompactLinak is also used for setup and commisioning.
5 Dimensions:
6 imotor Compact Ordering example: 77C xxx Option 2 Option 1 Battery pack Voltage 0 = No option 1 = QR 2 = QR + Earth interlock 0 = No option 1 = Gas pressure sensor (laser) 2 = Gas pressure input signal 0 = No battery 1 = One battery 2 = Two batteries 0 = 230/240 VAC 1 = 110 VAC 2 = 24 VDC icom Configuration 0 = No icom 3 = icom GSM 1 = icom standard 4 = icom modem 2 = icom GPRS 5 = icom RS232 interface imotor Configuration Mounting kit 0 = SAI interface 1 = icom interface 2 = RS485 interface 0 = No mounting kit 1 = One gear 3 = Three gears 2 = Two gears 4 = Four Gears RMU Brand 00 = No RMU 08 = Rewag 01 = F&G 09 = Krone 02 = ALSTOM 10 = M85 03 = Driecher 11 = Sprecher & schuh 04 = ABB 12 = Driescher Moosburg 05 = Areva 13 = Areva FBX 06 = Siemens 14 = Merlin Gerin RM6 07 = Holec 15 = Schneider RM6 Colour Unique project no. LINAK product type + = Standard colour xxx = 3 digit no. 77C = imotor Compact
7 The imotor Compact is tested according to the following standards Mechanical IEC (Ea) Shock, up to 15g IEC Free fall test (0,5 m) IEC Drop and Topple IEC (Fc) Vibration (2g, 9-350Hz)) Environmental IEC (Nb) From 70 C to -30 C, (30 C/h) 1000 cycles (90 days) High temperature. 42 days 1000 hrs at 70 C IEC (Db) Damp heat, cyclic, RH 95%, 40 C NC IEC (Kb) Salt Spray test (Corrosion test) Temperature IEC (Ab and Ad) 72 hrs -40 C, Storage IEC (Ab and Ad) 2 hrs -30 C, Operation IEC (Bb and Bd) 72 hrs 85 C, Storage IEC (Bb and Bd) 2 hrs 70 C, Operation Enclosure IEC60529, IP66 EMC Directive EMC Directive: 2004/108/EC according to the following standards: EN Generic standard Immunity for industrial environment EN Generic standard - emission for industrial environment. IEC/TS Electromagnetic compatibility (EMC) Part 6-5: Generic standards Immunity for power stations and substation environment. EN : Basic Publication. Testing and measuring techniques. Section 9. Pulse magnetic field immunity test. EN : Basic Publication. Testing and measuring techniques. Section 10. Damped oscillatory magnetic field immunity test. EN Electrical relays - Part 22-1: Electrical disturbance tests for measuring relays and protection equipment - 1 MHz burst immunity tests EN Electrical relays - Part 22. Electric disturbance test for measuring relays and protection equipment. Section 2 Electrostatic discharge test. EN Electrical relays - Part 22-3: Electrical disturbance tests for measuring relays and protection equipment - Radiated electromagnetic field disturbance tests EN Electrical relays - Part 22-4: Electrical disturbance tests for measuring relays and protection equipment - Electrical fast transient/burst immunity test IEEE C IEEE standard for Surge Withstand capability (SWC) Electrical Directive Low Voltage Directive: 73/23/EEC, according to the following harmonized standard: EN :2006 Machinery Directive Machinery Directive 98/37/EC.
8 Terms of use The user is responsible for determining the suitability of LINAK products for specific application. LINAK takes great care in providing accurate and up-to-date information on its products. However, due to continuous development in order to improve its products, LINAK products are subject to frequent modifications and changes without prior notice. Therefore, LINAK cannot guarantee the correct and actual status of said information on its products. While LINAK uses its best efforts to fulfil orders, LINAK cannot, for the same reasons as mentioned above, guarantee the availability of any particular product. Therefore, LINAK reserves the right to discontinue the sale of any product displayed on its website or listed in its catalogues or other written material drawn up by LINAK. All sales are subject to the Standard Terms of Sale and Delivery for LINAK. For a copy hereof, please contact LINAK. Copyright LINAK MA M A. Chapter X.XX
Type VRLTC tap changer
Report No. 1ZUA938502-AGC 2, Rev 0 Date: 6 November 2012 Type VRLTC tap changer Ruggedized electronics systems specification & type test data Product Style No Rating By Type VRLTC, on-tank, vacuum reactance
More informationMSR 2400R. Rugged Power System for Military and Heavy Duty Applications
MSR 2400R Rugged Power System for Military and Heavy Duty Applications 2400 W modular power system Power supply or battery charging systems Parallel n+1 connection, up to 90A Series connection, up to 360VDC
More informationMINER-S Station Controller
MINER-S Station Controller Substation Automation MINER-S Station Controller The MINER-S Station Controller is a SCADA enabled fixed point remote terminal unit (RTU) with a data concentrator, event reporter,
More informationPart No. Description Product Life Cycle Phase *) unit, 24 VDC, spring terminals. unit, 24 VDC, spring terminals, XC version
Ordering Data DATA SHEET TU520 Terminal Unit 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 214 400 R0001 1SAP 414 400 R0001 TU520-ETH, PROFINET I/O terminal unit, 24 VDC, spring
More informationTU531, TU532 Terminal Unit
Ordering Data DATA SHEET TU531, TU532 Terminal Unit 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 217 200 R0001 1SAP 217 000 R0001 1SAP 417 000 R0001 TU531, terminal unit, 230 VAC,
More informationTF501, TF521 Terminal Bases
Ordering Data DATA SHEET TF501, TF521 Terminal Bases 1 Ordering Data Part No. Scope of delivery Product life cycle status 1SAP 117 000 R0271 1SAP 317 000 R0271 1SAP 117 200 R0271 1SAP 317 200 R0271 TF501-CMS,
More informationAO523 Analog Input Module
Ordering Data DATA SHEET AO523 Analog Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 250 200 R0001 1SAP 450 200 R0001 AO523, analog output module, 16 AO, U/I, 12 bits
More informationScout-S Station Controller
Scout-S Station Controller Substation Automation Scout-S Station Controller The Scout-S Station Controller is a SCADA enabled remote terminal unit (RTU) with a data concentrator, event reporter, and built-in
More informationData Sheet. Digital Multifunctional Power Meter with LCD Display and Optional Modules WPM D
WPM 770 Data Sheet 679.D.141.02 Digital Multifunctional Power Meter with LCD Display and Application The digital Weigel Power Meters WPM 770 have been designed to display the electrical parameters in low
More informationArc protection relay. Features Three-phase overcurrent function. Application
Arc protection relay REA 10_ Page 1 Issued: May 1999 Status: New Data subject to change without notice Features Three-phase overcurrent function Loop-type or radial sensor fibre for arc detection Two high-speed
More informationEnergy Management Modular DC Energy analyzer Type VMU-E and VMU-X
Energy Management Modular DC Energy analyzer Type VMU-E and VMU-X Modular solution based on the combination of two units: VMU-E analysis unit and VMU-X universal power supply and RS485 communication unit.
More informationRelion 611 series. 611 series Type Test Certificate
Relion 611 series 611 series Document ID: 1MRS757466 Issued: 2016-02-22 Revision: B Product version: 2.0 Copyright 2016 ABB. All rights reserved Table of contents Table of contents Section 1 Section
More informationDC541 Digital Input/Output Module
Ordering Data DATA SHEET DC541 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 270 000 R0001 1SAP 470 000 R0001 DC541-CM, digital input/output module,
More informationCM597 Ethernet Communication Module
Ordering Data DATA SHEET CM597 Ethernet Communication Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 173 700 R0001 1SAP 373 700 R0001 CM597-ETH, communication module Ethernet
More informationAX521 Analog Input/Output Module
Ordering Data DATA SHEET AX521 Analog Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 250 100 R0001 1SAP 450 100 R0001 AX521, analog input/output module, 4 AI,
More informationHMISCU6A5 3 5 color touch controller panel - Dig 16 inputs/10 outputs
Characteristics 3 5 color touch controller panel - Dig 16 inputs/10 outputs Main Range of product Product or component type Display size Display type Pixel resolution Touch panel Offer Sustainability Sustainable
More informationHMISBC Rear Module controller panel - Dig 8 inputs/8 outputs +Ana 4 In/2 Out
Characteristics Rear Module controller panel - Dig 8 inputs/8 outputs +Ana 4 In/2 Out Main Range of product Product or component type Complementary Supply [Us] rated supply voltage Immunity to microbreaks
More informationMillenium 3. General Characteristics. General environment characteristics for CB, CD, XD, XR and XE product types
Millenium 3 General Characteristics Millenium 3 Compact Range Millenium 3 Expandable Range Millenium 3 Communication Options Millenium 3 Range General environment characteristics for CB, CD, XD, XR and
More informationHMISCU8A5 5 7 color touch controller panel - Dig 16 inputs/10 outputs
Characteristics 5 7 color touch controller panel - Dig 16 inputs/10 outputs Main Range of product Product or component type Display size Display type Pixel resolution Touch panel Complementary Backlight
More informationAI531 Analog Input Module
Ordering Data DATA SHEET AI531 Analog Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 250 600 R0001 AI531, analog input module, 8 AI, U/I/Pt100, TC, 15 bits + sign, 4-wires
More informationCI504 PROFINET Communication Interface Module
Ordering Data DATA SHEET CI504 PROFINET Communication Interface Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 221 300 R0001 1SAP 421 300 R0001 CI504-PNIO, PROFINET Bus Module
More informationDC532-XC, digital input/output module,
Ordering Data DATA SHEET DC532 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 240 100 R0001 1SAP 440 100 R0001 DC532, digital input/output module, 16
More informationFor Transmission, Distribution and Machinery protection.
Founded in 1953, Microelettrica Scientifica has developed a wide range of products, divided into three main lines: For Transmission, Distribution and Machinery protection. A-Line Electronic analogic. M-Line
More informationCM589 PROFINET Communication Module
Ordering Data DATA SHEET CM589 PROFINET Communication Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 172 900 R0011 1SAP 372 900 R0011 1SAP 172 900 R0111 1SAP 372 900 R0111
More informationFlair 21D - 22D - 23D - 23DM Self-powered, adjustment-free fault passage indicators
Technical leaflet - MV network management 01 Self-powered, adjustment-free fault passage indicators EMS58355 1 Customer benefits At the cutting edge of technology, they are used on underground MV networks
More informationCI542 PROFIBUS Communication Interface Module
Ordering Data DATA SHEET CI542 PROFIBUS Communication Interface Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 224 200 R0001 1SAP 424 200 R0001 CI542-DP, PROFIBUS DP bus module,
More informationTECHLINE iflex integrated Flexibility
TECHLINE iflex integrated Flexibility No control boxes. Fewer cables. Smarter options This is iflex TECHLINE actuators with iflex all feature an integrated H-bridge controller. This is why an iflex solution
More informationTECHLINE SYSTEM SOLUTIONS
TECHLINE SYSTEM SOLUTIONS www.linak.com/techline Plug & Play with LINAK system solutions TECHLINE system solutions improve functionality and add value to your application. Our systems offer: Simple Plug
More informationCD522 Encoder, Counter and PWM Module
Ordering Data DATA SHEET CD522 Encoder, Counter and PWM Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 260 300 R0001 1SAP 460 300 R0001 CD522, encoder & PWM module, 2 encoder
More informationHMISCU6B5 3 5 color touch controller panel - Dig 8 inputs/8 outputs +Ana 4 In/2 Out
Characteristics 3 5 color touch controller panel - Dig 8 inputs/8 outputs +Ana 4 In/2 Out Main Range of product Product or component type Display size Display type Pixel resolution Touch panel Offer Sustainability
More informationSubstation monitoring and control
Substation monitoring and control Part 3. Substation Automation Author Peter Johansen, www.jomitek.dk In the preceding 2 articles the topics of measurement techniques for voltage and current has been covered.
More informationDC522 Digital Input/Output Module
Ordering Data DATA SHEET DC522 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 240 600 R0001 1SAP 440 600 R0001 DC522, digital input/output module, 16
More informationPROTECTION RELAYS THE ULTRA LINE NUMERICAL MULTIFUNCTION INTELLIGENT DEVICE FOR PROTECTION, SUPERVISION, METERING AND CONTROL
MICROPROCESSOR PROTECTION RELAYS THE ULTRA LINE NUMERICAL MULTIFUNCTION INTELLIGENT DEVICE FOR PROTECTION, SUPERVISION, METERING AND CONTROL MICROELETTRICA SCIENTIFICA MANUFACTURES A COMPLETE RANGE OF
More informationInteliPro. Protection Relay for Parallel Applications. Technical Specification
InteliPro Protection Relay for Parallel Applications Product description InteliPro is a highly flexible interconnection/mains decoupling protective relay with extensive protective functions. It meets the
More informationInstruction book IQAN-LST. Publ no HY /UK Edition 0301
Instruction book IQAN-LST Publ no HY17-8364/UK Edition 0301 Contents 1 Introduction......................................................2 2 Precautions.......................................................3
More informationTM221M16TG controller M IO transistor PNP spring
Characteristics controller M221 16 IO transistor PNP spring Main Range of product Product or component type [Us] rated supply voltage Discrete input number Analogue input number Discrete output type Discrete
More informationCompactBlock Guard I/O EtherNet/IP Safety Modules
Installation Instructions CompactBlock Guard I/O EtherNet/IP Safety Modules Catalog Numbers 1791ES-IB8XOBV4, 1791ES-IB16 Topic Page Important User Information 2 North American Hazardous Location Approval
More informationHMISBC Rear Module controller panel - Dig 8 inputs/8 outputs +Ana 4 In/2 Out
Product data sheet Characteristics HMISBC Rear Module controller panel - Dig 8 inputs/8 outputs +Ana 4 In/2 Out Main Range of product Product or component type Device presentation Complementary Supply
More informationElectronic timer CT-ARS.21 OFF-delayed without auxiliary voltage with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-ARS.21 OFF-delayed without auxiliary voltage with 2 c/o (SPDT) contacts The CT-ARS.21 is an electronic timer from the CT-S range with true OFF-delay. It provides 7 time ranges
More informationElectronic timer CT-ARS.11 OFF-delayed without auxiliary voltage with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-ARS.11 OFF-delayed without auxiliary voltage with 1 c/o (SPDT) contact The CT-ARS.11 is an electronic timer from the CT-S range with true OFF-delay. It provides 7 time ranges
More informationAX522 Analog Input/Output Module
Ordering Data DATA SHEET AX522 Analog Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 250 000 R0001 1SAP 450 000 R0001 AX522, analog input/output module, 8 AI
More informationCM579-PNIO PROFINET Communication Module
Ordering Data DATA SHEET CM579-PNIO PROFINET Communication Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 170 901 R0101 1SAP 370 901 R0101 CM579-PNIO, PROFINET communication
More informationBus Bar Protection Relay B-PRO 4000
Bus Bar Protection Relay B-PRO 4000 Product Overview The IEC 61850 station bus embedded B-PRO 4000 relay provides complete bus and substation differential protection (low impedance) with CT saturation
More informationAI561 Analog Input Module
Ordering Data DATA SHEET AI561 Analog Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R1101 AI561, analog input module, 4 AI, U/I 1TNE 968 901 R3101 1TNE 968
More informationCircuit Breaker Sentinel (CBS) for SF 6. power circuit breakers
Circuit Breaker Sentinel (CBS) for SF 6 power circuit breakers Circuit Breaker Sentinel (CBS) for SF 6 power circuit breakers It is widely recognized that the concept of periodic equipment maintenance
More informationElectronic timer CT-ARS.11
2CDC 251 088 F0t07 Features Rated control supply voltage 24 240 V AC/DC Single function OFF delay timer without auxiliary voltage One device includes 7 time ranges (0.05 s 10 min) 1 c/o (SPDT) contact
More informationXPSMF40. Main. Safety module name. Monitoring safety detection discrete input Monitoring safety dialogue discrete output
Product datasheet Characteristics XPSMF4000 Preventa safety PLC compact - Safe Ethernet Main Range of product Product or component type Safety module name Safety module application Preventa Safety automation
More informationAPU 200 Automatic DATA SHEET Gen-set Controller DATA SHEET
APU 200 Automatic DATA SHEET Gen-set Controller DATA SHEET Measurement input, auto range Up to 1000 V AC L-L Up to 12.5 A (sinusoidal) 16 400 Hz Output Up to four analogue outputs Relay output RS 485 Modbus
More informationEnergy Management Modular DC Energy analyzer Type VIM-E and VIM-X
Energy Management Modular DC Energy analyzer Type VIM-E and VIM-X Modular solution based on the combination of two units: VIM-E analysis unit and VIM-X universal power supply and RS485 communication unit.
More informationCM592 PROFIBUS Communication Module
Ordering Data DATA SHEET CM592 PROFIBUS Communication Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 173 200 R0001 1SAP 373 200 R0001 CM592-DP, communication module PROFIBUS
More informationCommunication Gateway COM 610. Product Guide
Communication Gateway COM 610 Product Guide Issued: September 2004 Status: Updated Version: D/17.10.2006 Data subject to change without notice Features Protocol conversion gateway for substation automation:
More informationDI572 Digital Input Module
Ordering Data DATA SHEET DI572 Digital Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 230 500 R0000 1TNE 968 901 R3101 1TNE 968 901 R3102 1TNE 968 901 R3103 1TNE 968
More informationElectronic timer CT-ERD.12
2CDC 251 092 F0t06 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied
More informationElectronic timer CT-APS.21 OFF-delayed with 2 c/o (SPDT) contacts
Data sheet Electronic timer CT-APS.21 OFF-delayed with 2 c/o (SPDT) contacts The CT-APS.21 is an electronic timer from the CT-S range with OFF-delay. It provides 10 time ranges and a continuous rated control
More informationElectronic timer CT-AHD.22
2CDC 251 093 F0t06 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied
More informationTM221CE40R controller M IO relay Ethernet
Characteristics controller M221 40 IO relay Ethernet Main Range of product Product or component type [Us] rated supply voltage Jan 6, 2019 Modicon M221 Logic controller 100...240 V AC Discrete input number
More informationVoltage Transducer UMT516 / MT516
Voltage Transducer UMT516 / MT516 True RMS AC voltage measurements Voltage auto range measurements up to 600V # Wide frequency measurement range 16 400 Hz High accuracy class 0.2 (IEC-688), 0.1 on communication
More informationMINER-S Station Controller. Substation Automation
Substation Automation MINER-S Station Controller incorporates traditional RTU functions with new technology in a compact design MINER-S Station Controller combines the functions of a traditional RTU with
More informationCM589 PROFINET Communication Module
Ordering Data DATA SHEET CM589 PROFINET Communication Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 172 900 R0011 1SAP 372 900 R0011 1SAP 172 900 R0111 1SAP 372 900 R0111
More informationTM221M16R controller M IO relay
Product data sheet Characteristics TM221M16R controller M221 16 IO relay Complementary Main Discrete I/O number 16 Number of I/O expansion module Supply voltage limits Inrush current Power consumption
More informationGEN series G070A. Data sheet. Torque/RPM adapter. Special features
GEN series G070A Torque/RPM adapter Data sheet Special features - Connect up to two torque transducers - Connect to T12/T40B using standard cables - RS422 differential input signals for highest immunity
More informationInstruction book IQAN-LSL. Publ no HY /UK Edition 0301
Instruction book IQAN-LSL Publ no HY17-8367/UK Edition 0301 Contents 1 Introduction......................................................2 2 Precautions.......................................................3
More informationextending the boundaries of technology evolution of proven technology FEATURES
extending the boundaries of technology evolution of proven technology FEATURES IEC 61850 compliant Advanced AC capabilities with comprehensive fault detection Integrated protection functions Disturbance
More informationElectronic timer CT-ERS.12 ON-delayed with 1 c/o contact Data sheet
2CDC 251 056 F0t07 Features Rated control supply voltage 24-48 V DC, 24-240 V AC Single-function ON-delay timer One device includes 10 time ranges (0.05 s - 300 h) 1 c/o contact 2 LEDs for status indication
More informationHMISCU6B5. Main. 60 right 40 top 60 bottom
Product datasheet Characteristics HMISCU6B5 Main Range of product Product or component type Display size Display type Touch panel Device presentation Magelis SCU Small touch HMI controller 3.5 inch With
More informationHMISCU6A5. Main. 60 right 40 top 60 bottom
Product datasheet Characteristics HMISCU6A5 Main Range of product Product or component type Display size Display type Touch panel Device presentation Magelis SCU Small touch HMI controller 3.5 inch With
More informationEM132 EM132. Main Features. Multi-functional 3-Phase Transducer. Energy Meter
EM132 MULTI-FUNCTION TRANSDUCER SATEC EM132 is a Smart DIN Rail Multi-Function Transducer with a local display. It is based on SATEC s best seller PM130 PLUS with an off-the-shelf LCD display (similar
More informationDC Connector. Data sheet LINAK.COM/HOMELINE
DC Connector Data sheet LINAK.COM/HOMELINE DC Connector The DC CONNECTOR is a HOMELINE accessory making it possible to connect a variety of standard articles equipped with a DC plug to your TWINDRIVE TD3
More informationTechnical specifications
Technical specifications General information Operating temperature -25 to 60 C Storage temperature -40 to 70 C Enclosure type Panel installation (DIN IEC 61554) Enclosure fixing Screw-type clamping technology
More informationElectronic timer CT-ARE OFF-delayed without auxiliary voltage, 1 c/o (SPDT) contact
Data sheet Electronic timer CT-ARE OFF-delayed without auxiliary voltage, 1 c/o (SPDT) contact The CT-ARE is an electronic time relay with OFF-delay. It is from the CT-E range. The CT-E range is the economic
More informationType MVTT 14 and MVTT 15: Static Digital Time delay relays
Type MVTT 4 and MVTT 5: Static Digital Time delay relays Features 000/ setting range Time settings easily selected by means of thumbwheel switches Provide time delayed pick-up, or drop-off Compact construction
More informationSolid State Battery Fuel Gauge
Instrumentation Model 909R www.curtisinstruments.com Curtis Model 909R is designed to be used on golf cars and other 36 or 48 VDC battery-powered vehicles to display battery state-of-charge and to charge
More informationArc protection relay. Features Three-phase overcurrent function. Application
Arc protection relay REA 10_ Issued: May 1999 Status: Updated Version: B/12.11.2001 Data subject to change without notice Features Three-phase overcurrent function Loop-type or radial sensor fibre for
More informationSynchro-check relay. Application
Issued: April 1999 Status: Updated Version: B/08.11.2001 Data subject to change without notice Features Two identical operation stages allowing the closing conditions of two separate circuit breakers to
More informationTM221M32TK controller M IO transistor PNP
Characteristics controller M221 32 IO transistor PNP Main Range of product Product or component type [Us] rated supply voltage Discrete input number Analogue input number Discrete output type Discrete
More informationDI561 Digital Input Module
Ordering Data DATA SHEET DI561 Digital Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R2101 1TNE 968 901 R3101 1TNE 968 901 R3103 1TNE 968 901 R3105 DI561, digital
More informationProgrammable controller MCX06C
MAKING MODERN LIVING POSSIBLE Technical brochure Programmable controller MCX06C Danfoss range of universal MCX programmable controllers offers the functionality and reliability you need to get the best
More informationXPSMF35. Product data sheet Characteristics. Preventa safety PLC compact - Profibus DP protocol. Main. Complementary. Safety module name
Product data sheet Characteristics XPSMF3542 Preventa safety PLC compact - Profibus DP protocol Main Range of product Product or component type Safety module name Safety module application Nov 13, 2018
More informationPM174 PM174 IEEE1159 ADVANCED POWER QUALITY ANALYZER. Features
PM174 IEEE1159 ADVANCED POWER QUALITY ANALYZER The PM174 is a compact, multi-function, three-phase AC powermeter and power quality analyzer specially designed to meet the requirements of users ranging
More informationRhino Buffer Module PSM24-BFM600S. Operating Instructions
Rhino Buffer Module PSM24-BFM600S Operating Instructions RHINO BUFFER MODULE PSM24-BFM600S Description The PSM24-BFM600S Buffer Module will hold the output voltage of a 24 VDC power supply after brownouts
More informationSPA-ZC 302. Profibus-DPV1/SPA Gateway. Product Guide. spa-zc302_rightco300
Profibus-DPV1/SPA Gateway SPA-ZC 302 Product Guide spa-zc302_rightco300 Issued: 25.11.2003 Status: Updated Version: D/16.05.2008 Data subject to change without notice Features Profibus DP Version 1 connectivity
More informationRhino PSM Power Supplies. Operating Instructions
Rhino PSM Power Supplies Operating Instructions RHINO Power Supplies PSM Series Description The PSM power supplies are built-in units. The mounting position for PSM power supplies must fulfill the requirements
More informationSensitive Earth-fault Relay SPAJ 111 C. Product Guide
Issued: April 1999 Status: Update Version: C/12.04.2006 Data subject to change without notice Features Sensitive low-set neutral overcurrent stage with definite time characteristic High-set neutral overcurrent
More informationThermistor motor protection relays CM-MSS.12 and CM-MSS.13
Data sheet Thermistor motor protection relays CM-MSS.12 and CM-MSS.13 The thermistor motor protection relays CM-MSS.12 and CM-MSS.13 monitor the winding temperature of motors and protect them from overheating,
More informationRTU500 series Data Sheet Power Supply CP-E 24/2.5
Data Sheet Power Supply CP-E 24/2.5 Power Supply CP-E 24/2.5 Application The primary switch mode power supply offers two voltage input ranges. This enables the supply with AC or DC. Furthermore it is equipped
More informationSolid-State Contactors
Solid-state contactors for switching motors The solid-state contactors for switching motors are intended for frequently switching on and off three-phase current operating mechanisms up to 7.5 kw and reversing
More informationFocus on Pergolas LINAK.COM/TECHLINE
Focus on Pergolas LINAK.COM/TECHLINE When partnering with LINAK you get more than just a product in your hands. It is our goal to create added value to our customers by offering innovative solutions, extensive
More informationTM221ME16T controller M IO transistor PNP Ethernet
Characteristics controller M221 16 IO transistor PNP Ethernet Main Range of product Product or component type [Us] rated supply voltage Discrete input number Analogue input number Discrete output type
More informationDC562, digital input/output module,
Ordering Data DATA SHEET DC562 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 231 900 R0000 1TNE 968 901 R3101 1TNE 968 901 R3102 1TNE 968 901 R3103 1TNE
More informationSEL-734B Data Sheet. Advanced Monitoring and Control System. Major Features and Benefits
Advanced Monitoring and Control System Compact Enclosure Full-Size Enclosure Major Features and Benefits The SEL-734B combines volt/var based capacitor bank control with power quality monitoring and advanced
More informationRE22R1QMQ star-delta timing relay - 230VAC/440VAC - 1 C/O
Characteristics star-delta timing relay - 230VAC/440VAC - 1 C/O Main Range of product Product or component type Discrete output type Device short name Nominal output current Complementary Contacts type
More informationINGEPAC DA-CU. Control Unit. Data Sheet ZY8932IMA01E 31/03/2016
ZY8932IMA01E 31/03/2016 INGEPAC DA-CU Control Unit Data Sheet Total or partial reproduction of this publication by any means or procedure is prohibited without previous express written authorisation by
More informationCCD1100S. Technical Data Sheet
CCD00S Technical Data Sheet CCD00S Compact Controller with Display 4 Buttons 3.2 colour TFT 38 configurable I/O Programmable via Guitu Designed f operation at both 2V DC and 24V DC Real Time Clock CCD00S
More informationFeeder protection relay SPAA 121 C. Product Guide
Issued: April 1999 Status: Updated Version: C/06.03.2006 Data subject to change without notice Features Two-phase low-set phase overcurrent unit with definite time or inverse time characteristic Two-phase
More informationElectronic timer CT-ERS.21
2CDC 251 057 F0t07 Features Rated control supply voltage 24 240 V AC/DC Single function ON delay timer One device includes 10 time ranges (0.05 s 300 h) 2 c/o contacts 2 LEDs for status indication Width
More informationTM221CE24R controller M IO relay Ethernet
Product data sheet Characteristics TM221CE24R controller M221 24 IO relay Ethernet Complementary Main Discrete I/O number 24 Number of I/O expansion module Supply voltage limits Network frequency Inrush
More informationSIPROTEC easy 7SJ45 Numerical Overcurrent Protection Relay Powered by CTs
SIPROTEC easy 7SJ4 Numerical Overcurrent Protection Relay Powered by CTs Function overview Fig. /1 Description The SIPROTEC easy 7SJ4 is a numerical overcurrent protection relay which is primarily intended
More informationCI521 Modbus Communication Interface Module
Ordering Data DATA SHEET CI521 Modbus Communication Interface Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 222 100 R0001 1SAP 422 100 R0001 CI521-MODTCP, Modbus TCP bus
More informationTM221CE40R controller M IO relay Ethernet
Product datasheet Characteristics TM221CE40R controller M221 40 IO relay Ethernet Main Range of product Product or component type [Us] rated supply voltage Discrete input number Analogue input number Discrete
More informationEarth-fault Relay SPAJ 110 C. Product Guide
Issued: April 1999 Status: Updated Version: C/12.04.2006 Data subject to change without notice Features Low-set neutral overcurrent stage with definite time or inverse time characteristic High-set neutral
More information