SSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN
|
|
- Teresa Park
- 5 years ago
- Views:
Transcription
1 SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN
2 General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature 100 VAC/VDC (Max) 1200 VAC 100 cycles Natural White Receptacle: -40~+105 C Cable assemblies: -40~+100 C Certifications UL1977, CSA C22.2 No , RoHS Material Specification Housing Terminal Thermoplastic, UL94V-0 Copper Alloy, Gold Plated, All over nickel underplated B-to-B, W-to-B, W-to-W Low profile design 2, 4 and 6 pins available SMT Receptacle : Right Angle and Straight types Customized cable length available upon request Single (wire) and dual (flat cable) ended cable assemblies available B2W / B2B locks available for various applications High temperature material for reflow processing Tape & reel packing for high speed SMT processes Cost-effective alternative to hand soldering UL 1977 / Lead Free and RoHS Compliant ** Waterproof receptacle and Field Installable (SSL 1.2) available soon
3 Physical Dimensions Reference PCB Design Guideline 2P 4P 6P
4 Physical Dimensions Reference PCB Design Guideline 2P 4P 6P
5 Physical Dimensions Reference PCB Design Guideline 2P 4P 6P
6 Physical Dimensions
7 Current [A] SSL 1.1 Connector Test Characteristics The connector is tested to the following specifications: Mechanical Conditions and Performance Retention Force Durability Connector Mating & Unmating Force Mechanical Shock Vibration Cable Pull-Out Per EIA , Test Method B, minimum 0.3kgf(2.94N) per contact Per EIA , mated and unmated connector assemblies for 100 cycles at maximum rate of 500±50 cycles per hour Per EIA , shall be fully mated at a rate of 25.4 millimeters per minute Mating force 2/4/6P: 0.5/ 1.5/ 2.0kgf maximum Unmating Force / without lock 2/4/6P: 0.1/ 0.4/ 0.5kgf minimum Unmating Force / with lock 2/4/6P: 2.5kgf minimum Per EIA , Subject mated connector to 50G,half-sine shock pulses of 11 milliseconds duration. Three shocks in each direction applied along 3 mutually perpendicular planes, 18 total shocks. Per EIA , Test Condition Vll, Subject mated specimens to 3.10G s rms between 20~500HZ. Fifteen minutes in each of 3 mutually perpendicular planes. Per EIA , apply axial load of 2.0 kgf min. to the cable or wire for one minute. Current-Carrying Capacity Curve Conductor size: 22AWG Ambient Temperature [ C]
8 Test Characteristics The connector is tested to the following specifications: Electrical Conditions and Performance Low Level Contact Resistance Per EIA , measure and record the contact resistance with a test current of 100 ma maximum and 20 millivolts open circuit (source) voltage maximum 20 mω maximum initial, 10 mω changes maximum after test Insulation Resistance Per EIA , apply a test voltage 250V/DC ±10% between the adjacent contacts 1000 МΩ minimum Dielectric Withstand Voltage Temperature Rise Environmental Conditions and Performance Per EIA , Test Method B, apply a test voltage of 1,200VAC, 60 Hz between adjacent contacts for 1 minute Per UL2238 Section 25, mate connector and measure the temperature rise of contact when the maximum rated T<30 C at 3A Damp Heat, Cyclic Salt Spray Per EIA , Test method II, Test condition A, 40±2 C at 90% ~ 95% RH, four cycles (4 days) Per EIA , 5% salt solution for 24 hours unmated Thermal Aging Per EIA , Method A, Test Condition 4, 105 C for 250 hours Thermal Shock Solderability Resistance to Solder Heat Per EIA , Method A Test Condition VII. 25 cycles between -40 and 105 C with 30 minute dwells at temperature extremes Per EIA , Soldering Time : 3s±0.5s, Solder Temperature: 240±2 C 0.2mm from terminal tip 0.2mm from fitting nail tip Solderable area shall have a minimum of 95% solder coverage by 10x magnification. Per EIA , Procedure 3, Test Condition C, 260±5 C for 10±2 seconds
PRODUCT SPECIFICATION
1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.
More informationMini PCI Express Card Socket
Mini PCI Express Card Socket Document No: Page: 1 of 4 1. Scope This specification covers the material and performance requirements for the Mini PCI Express Card Socket series. 2. Applicable documents
More informationPRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.
s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of
More informationAmphenol Amphenol Taiwan Corporation Sheet 1 of 9
Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: MINI SAS Connectors Product Specification G40 Series 0.80mm Pitch, Cable End and Board Mount Revisions Control Rev. ECN
More informationPRODUCT SPECIFICATION
RECEPTACLE 1.0 SCOPE This Product Specification covers the performance requirements of the Serial Attach SCSI / High Speed Serialized host receptacle connector. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME
More informationProduct Specification AMP Connector USB Consortium, Plug & Receptacle. Lead Free Version
Product Specification 108-60034 AMP Connector USB Consortium, Plug & Receptacle Lead Free Version 1. Scope: 1.1 Contents: This specification covers the requirements for product performance, test methods
More informationPRODUCT SPECIFICATION
RECEPTACLE.0 SCOPE This Product Specification covers the performance requirements of the Serial Attach SCSI / High Speed Serialized host receptacle connector. 2.0 PRODUCT DESCRIPTION 2. PRODUCT NAME AND
More informationPRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 1 SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
More informationMini PCI Express & msata Connector
09.Mar.2012 Rev. C Mini PCI Express & msata Connector 1 Scope: 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions of MINI PCI
More informationPRODUCT SPECIFICATION
Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 1 Dual SIM Card Connector, Retainer Type, 8-Pin, SMT, 3.0mm Profile Page 2 1.0 SCOPE. This specification covers performance, tests
More informationProduct Specification. Mezza-pede SMT Connector Low Profile 1.0mm Pitch
Mezza-pede SMT Connector Low Profile 1.0mm Pitch Rev. 1 December 7, 2016 1.0 Scope This product specification applies to 1.0mm pitch Mezza-pede SMT Connectors, designed for the mating and unmating of a
More informationPRODUCT SPECIFICATION
1.0 SCOPE DDR4 DIMM SOCKET This Product Specification covers the 0.85mm centerline gold plated DDR4 DIMM edge card connector for 1.40 ± 0.10 thick memory modules..0 PRODUCT DESCRIPTION.1 PRODUCT NAME AND
More informationProduct Specification
USB A CONNECTOR 1 of 7 J 1.0 GENERAL This specification defines the performance, tests and quality requirements for the USB A connector. This document is composed of the following sections. 1. General
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C 2.54mm (.100") Pitch FEATURES AND SPECIFICATIONS Features and Benefits
More informationSPECIFICATION MARCH MULTI MEDIA MEMORY CARD CONNECTOR. Kingfont Precision Ind. Co., Ltd. 17 FL-3, NO. 738, CHUNG CHENG ROAD.
SPECIFICATION SPEC. NO. SP0A24 REV B DATE MARCH-26-2004 PRODUCT NAME PRODUCT NO MULTI MEDIA MEMORY CARD CONNECTOR SDCMF-X07XXW1XX Kingfont Precision Ind. Co., Ltd. 738 17 3 17 FL-3, NO. 738, CHUNG CHENG
More informationPRODUCT SPECIFICATION
SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 1 SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality
More informationAMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
More informationJun-2012 Rev B2
Product Specification 108-99116 11-Jun-2012 Rev B2 USB / External Serial ATA Connector, 2 in 1 Type 1. SCOPE 1.1. Contents This specification covers the performance, tests and quality requirements for
More informationNano Pitch I/O Pluggable Connector
Design Objective 108-60118 06 Aug 2017 Rev 1 Nano Pitch I/O Pluggable Connector 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity (TE)
More informationPRODUCT SPECIFICATION
PRODUCT SPECIFITION PAGE: 1 OF 7 REV: A Serial ATA Connector, (22SAPP-X-X) LIST OF REVISION REV PAGE DESCRIPTION ECN. NO. DATE A 01-07 NEW E9201035 01/24/03 PRODUCT SPECIFITION PAGE: 2 OF 7 REV: A Serial
More informationPRODUCT SPECIFICATION CUSTOM CONFIGURABLE MODULAR POWER DOCK CONNECTOR SYSTEM
1.0 SCOPE This Product Specification covers the custom configurable modular printed circuit board (PCB) Dock Connector System with gold plating. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME AND SERIES NUMBER(S)
More informationUSB 3.0 Plug & Receptacle
USB 3.0 Plug & Receptacle 1. Scope: 1.1 Contents: This specification covers the requirements for product performance, test methods and quality requirements of Tyco lectronics Universal Serial Bus (USB)
More informationzqsfp+stacked Connector and Cage Assembly
Product Specification 108-60102 May 27, 2015 Rev A1 zqsfp+stacked Connector and Cage Assembly 1. SCOPE 1.1. Content This specification defines performance, test and quality requirements for the zqsfp+stacked
More informationFeb-2016 Rev 1
08-509-2 22-Feb-206 Rev USB Type-C Connector Scope :. Contents This specification covers the requirements for product performance, test methods and quality assurance provisions of TE Connectivity USB type
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Power Connectors FEATURES AND SPECIFICATIONS Features and Benefits Positive
More informationHIGH POWER CONTACT ELECTRICAL SPECIFICATIONS
HIGH POWER CONTACT ELECTRICAL SPECIFICATIONS 11.12.438 8.83.348 5.72.225 8.83.348 11.12.438 12.70.500 Receiver Contact Part # 610 149 101 38.48 1.515 36.20 1.425 12.70.500 ITA Contact Part # 610 150 101
More informationAmphenol Amphenol Taiwan Corporation Sheet 1 of 16
Amphenol Amphenol Taiwan Corporation Sheet 1 of 16 Title: USB3.0 Product Specification Part Number: GSB3 Series Description: USB3.0 A&B Type Plug & Receptacle Revisions Control Rev. ECN Number Originator
More informationProduct Specification. CLOUDSPLITTER Connector System
Product Specification 01NOV2013 Rev A CLOUDSPLITTER Connector System 1. SCOPE 1.1. Content This specification covers the performance, tests and quality requirements for the CLOUDSPLITTER connector system.
More informationPRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
More informationPRODUCT SPECIFICATION
SINGLE ROW CONNECTOR SYSTEM 1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors
More information3M SlimLine 85ohm Cable Assembly
Product Specifications May 2017 78-5102-0240-7, Rev B Scope This document summarizes test methods, test conditions, and product performance requirements for 3M SlimLine 85ohm Cable Assembly. Reference
More informationVertical type HDMI Receptacle Connector
Product Specification 108-60086 Vertical type HDMI Receptacle Connector 1 Scope: 11 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions
More informationOSFP Connector Cage & Cable System
PAGE /6 /5/7 UNRESTRICTED OSFP Connector Cage & Cable System PAGE /6 /5/7 UNRESTRICTED.0 SCOPE This Product Specification covers performance, test and quality requirements for the JPC Quad Small Form Factor
More informationProduct Performance Specifications QuadraPaddle Connector
Product Performance Specifications QuadraPaddle Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the QuadraPaddle Connector and connector system.
More informationMar11 Rev C
Product Specification 108-1956 11Mar11 Rev C PC/104 and PC/104-Plus Connector Systems 1. SCOPE 1.1. Content This specification covers performance, tests and quality requirements for the TE Connectivity
More informationAmphenol Amphenol Taiwan Corporation Sheet 1 of 11
Amphenol Amphenol Taiwan Corporation Sheet 1 of 11 Title: Part Number: Description: RJ-MAG Connector Product Specification RJMG21202XXXXXX RJmag 1 x 2-Port W/ LED Revisions Control Rev. ECN Number Originator
More informationSPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF DVI MALE AND FEMALE CONNECTOR SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS CLAUSE PAGE 1.0 SCOPE.. 3 2.0 APPLICABLE
More informationProduct Specification
Product Specification PR041-01 Revision A0 (Date 4-3-2017) Stewart Connector 11118 Susquehanna Trail South Glen Rock, Pa. 17327-9199 Ph: (717) 235-7512 Fax: (717) 235-4675 Product Specification PR0410-01
More informationMini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
More informationDUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
More informationPRODUCT SPECIFCATION GS MINI-SAS HD External Cable to Board Connector System. 1 of 14 F. Roger Cheng TYPE NUMBER
1 of 14 F TABLE OF CONTENTS 1.0 OBJECTIVE... 3 2.0 SCOPE... 3 3.0 APPLICABLE DOCUMENTS... 3 3.1 FCI SPECIFICATIONS... 3 3.2 OTHER STANDARDS AND SPECIFICATIONS... 3 3.3 FCI PRODUCT QUALIFICATION TEST REPORTS...
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 0.80mm (.031") Pitch Small Form-Factor Pluggable (SFP) Receptacle 74441
More informationProduct specification
SMT Modular Jack single port vertical and horizontal 1 of 12 H PAGE 1.0 OBJECTIVE 2 2.0 SCOPE 2 3.0 GENERAL 2 4.0 DEFINITIONS 3.1 Qualification 2 3.2 Material 2 3.3 Finish 2 3.4 Design and construction
More informationQUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
More informationPRODUCT SPECIFICATION. MES3050 Rev A Date 11/06/09 T-Flash Memory Card, Push-Push + SIM Card (6-Pin), Push-Pull (2-in-1 Combo Connector).
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the 2-in-1 Combo Connector MES3050 (T-Flash Push-Push + SIM 6-Pin Push-Pull). 2.0 PRODUCT NAME AND PART
More informationSPECIFICATION AND PERFORMANCE CHARACTERISTICS OF PCPR CONNECTOR SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF PCPR CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page No. 1 CONTENTS Section PAGE 1.0 SCOPE.. 3 2.0 APPLICABLE STANDARDS 2.1 Regulatory
More informationAug04 Rev D EC
Product Specification 108-1163 18Aug04 Rev D EC 0990-1127-04 Modular Plugs, Thru-Hole and Surface Mount Jacks, Data and Telephone, PCB Mounted 1. SCOPE 1.1. Content This specification covers the performance,
More information3M 100G QSFP28 Direct Attach Copper Cable Assemblies, 9Q Series
Product Specifications June 2017 78-5102-0262-1, Rev A 3M 100G QSFP28 Direct Attach Copper Cable Assemblies, 9Q Series Scope This document summarizes test methods, test conditions, and product performance
More informationCABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION
More informationSPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS QUICK SELECTOR CHART SPRING-LOADED CONNECTORS AND PAD CONNECTORS GRID 1.25 mm 2.54 mm SINGLE ROW SINGLE ROW DOUBLE ROW SLC CONNECTORS SEE PAGE Straight
More informationProduct Performance Specification Mini Power Connector
Product Performance Specification Mini Power Connector 1. Scope 1.1 Content This specification covers the performance, tests and quality requirements for the Mini Power Connector and connector system.
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. 3.0, BMI Wire-to-Wire BMI Connector System Americas Headquarters isle, Illinois
More informationPwrMAX High Power Connector System (Preliminary)
1 of 14 5 1.0 OBJECTIVE 2.0 SCOPE This specification defines the performance, test, quality and reliability requirements of the PwrMAX Power Connector System. 3.0 GENERAL This specification is applicable
More informationOCuLink x4 Cable end
PAGE /5 OCuLink x4 Receptacle Connector OCuLink x4 Cable end PAGE 2/5.0 SCOPE This Product Specification covers the performance requirements of the Pitch 0.5mm PCI-e OCuLink Pluggable Connectors 2.0 PRODUCT
More information0.4 mm Pitch, Space-saving Interface Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at your Hirose sales representative. NEW Series Small size.
More informationPRODUCT SPECIFICATION
DC Power Jack, Thru-Hole, Horizontal, w/locating Pegs, Ø2.00mm Page 1 DC Power Jack, Thru-Hole, Horizontal, w/locating Pegs, Ø2.00mm Page 2 1.0 SCOPE. DC Power Jack, Thru-Hole, Horizontal, w/locating Pegs,
More informationInterface Connectors for Miniature, Portable Terminal Devices
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationSPRING-LOADED CONNECTORS PAD CONNECTORS
SPRING-LOADED CONNECTORS PAD CONNECTORS GENERAL SPECIFICATIONS The values listed below are general specs applying for Preci-Dip spring-loaded connectors. Please see individual catalog page for additional
More informationBOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
More informationPRODUCT SPECIFICATION
1.0 SCOPE This Product Specification covers the 3.00 mm (.118 inch) centerline (pitch) square pin headers when mated with either printed circuit board (PCB) connector or connectors terminated with 20 to
More information3M (TM) Ribbon Cable Socket and Header, 451 and 452 Series.050" x.050" (1.27 mm x 1.27 mm)
3M (TM) Ribbon Cable Socket and Header, 451 and 45 Series.050" x.050" (1.7 mm x 1.7 mm) Product Specification: 78-510-0091-4 Revised: 1-6-016 78-510-0091-4 Rev D of 9 Page Cover Page..... 1 Contents 1.
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. FEATURES AND SPECIFICATIONS Features and enefits Meets UL 1086 Section 8
More informationSPECIFICATION AND PERFORMANCE CHARACTERISTICS OF CONNECTOR SCSI INTERFACE NFDS & NFDP SERIES
SPECIFICATION AND PERFORMANCE CHARACTERISTICS OF CONNECTOR SCSI INTERFACE NFDS & NFDP SERIES CIRCUIT ASSEMBLY CORP. 18 THOMAS STREET, IRVINE, CA 92618-2777 Page 1 of 15 CONTENTS CLAUSE PAGE 1.0 SCOPE..
More informationPCI-SIG ENGINEERING CHANGE NOTICE
PCI-SIG ENGINEERING CHANGE NOTICE TITLE: Host Socket Recommendations DATE: Updated June 12, 2006 (Initial release April 10, 2006) AFFECTED DOCUMENT: PCI Express Mini Card, Half-Mini Card ECR (Content of
More information0.8 pitch 模号 (MODEL NO) 未注公差 RECOMMENDED PCB LAYOUT 1.90* * ±0.
5.80 0.8 pitch 0.40 1.90*4 0.80*4 2.30 7.40 4 0.8 0.50 0.80 4.75 RECOMMENDED PCB LAYOUT 4.75 9.20 1.25 3.85 3.90±0.05 7.70±0.05 6.67 7.70 8.10 规格说明 :Specifications: 电气特性 :Electrical: 1. 额定电流 :Current Rating
More informationPRODUCT SPECIFICATION TITLE PAGE REVISION
1 of 14 A 1.0 OBJECTIVE This specification defines the performance, test quality and reliability requirement of the Micro Serial-ATA Host and Device connectors. 2.0 SCOPE This specification is applicable
More informationMeet requirements of USB 2.0
NEW Meet requirements of USB.0 UX Series Features 1. Certified to perform as required in USB.0 Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission
More informationDistributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Overview The ST Series interface connectors are specifically designed for use as Input/Output (I/O) connectors on portable information devices.
More information3M Ribbon Cable Socket and Header, Series 451 & " x.050" (1.27 mm x 1.27 mm)
1 of 8 3M Ribbon Cable Socket and Header, Series 451 & 452.050" x.050" (1.27 mm x 1.27 mm) Product Specification: 78-5102-0091-4 Revised: 05-01-2013 2 of 8 Page Cover Page..... 1 Contents 2 1. Scope......
More informationPDS: Rev :A STATUS:Released Printed: Jan 04, 2012
of 2 A.0 Objective This specification defines the performance, test, quality and reliability requirements of the USB3.0 Standard- A Receptacle. 2.0 Scope This specification is applicable to the termination
More informationConstruction. Mechanical data Number of Contacts 7. Electrical data Insulation resistance Contact resistance max. Environmental data.
1136 ITT - CCM Catalog 11/20/00 12:29 PM Page 59 The is a connector for MultiMediaCards. These cards have been developed as small form factor memory cards with ROM and RAM capabilities. The connector provides
More informationSPRING - LOADED CONNECTORS
SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS Quick Selector Chart Spring-loaded connectors and Pad connectors TEL +1 32 21 0 00 2 mm 2.5 mm 3 35, 36 35, 36 Surface mount perpendicular with positioning
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationEN3 SERIES WEATHERTIGHT CONNECTORS NEW PRODUCT BULLETIN 602
FEATURES & BENEFITS Sealed to IP68 NEMA 250 (6P) Patented grommet & o-ring free design Available in ribbed or winged coupling ring Cable, panel & cable to cable options Gold plated contacts standard Solder,
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Jan..0 Copyright 0 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Overview The ST Series
More informationConstruction. Mechanical data Number of Contacts 6, 8 or 16. Electrical data Insulation resistance Contact resistance max. Switch contact resistance
1136 ITT - CCM Catalog 11/20/00 12:28 PM Page 45 CCM04 MKII The CCM04 without card guidance is used where space is at a premium and the card guidance can be built around the connector (rather than provided
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Overview The ST Series interface connectors are specifically designed for use as Input/Output
More informationDDR4 DIMM Sockets, Halogen-free
Meeting JEDEC specifications, these high-speed sockets offer greater PCB real-estate and cost savings with excellent assembly processing compatibility Meeting JEDEC specifications, Molex s Vertical SMT
More informationPGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
More informationRFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
More information2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)
NEW 2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) DF59 Series Floating Structure in Three xial Directions (Board-to-Board Structure) X
More informationCommercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
More informationMolex s family of high-speed Micro SAS Connectors featuring the Dual-stack Receptacle with Pin Cover
Design-enhanced Micro SAS connectors now include dual-drive stacked receptacles with an integrated ground plane and a protective pin cover for greater reliability in compact storage applications Molex
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICT,REC,038,ASY,.025,TAPE,CAP
More informationBOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) MICTOR RECEPT ASSY, 38 POS.
More informationProduct Specification
MCX Jack, Straight Orientation, Through-hole MCX Plug, Straight Orientation, Through-hole Other configurations available for: Vertical and right angle cable-to-board applications Through-hole, surface
More informationIDC Assembly (depends on cable) -55/125 C. IDC Assembly (depends on cable) By ambient temperature: 20 C 1,2 A 70 C 0,9 A 100 C 0,6 A
mm Connectors Surface Mount Technology, Solderless Pressfit, IDC Electrical And Mechanical Characteristics Number of Pins Technical data Climate Category Bearing and operating temperature area Current
More informationES3 Series (WF2 Type) (culus Certified Product)
COMPONENTS PRODUCT INFORMATION NEW Board-to Cable Connector For LED Lighting Power Supply ES3 Series (WF2 Type) (culus Certified Product) CONNECTOR MB-0227-3 July 2012 RoHS Compliant Receptacle (ES3B002WF2)
More informationTop Load Socket: BTB
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
More informationIntroduction. Purpose. Introduction to JAE s HDMI Connector, DC* Series
Purpose Introduction Introduction to Objectives Application examples Main features General specifications Materials and finishes Content X pages Learning Time: X mins v1.0 1 JAE DC* Series HDMI Connector
More informationAirMax POWER CONNECTOR MODULES Part of the AirMax Connector Family
Part of the AirMax Connector Family HIGH PERFORMING AND DURABLE CONNECTORS Hard Metric high power connectors are a perfect complement to AFCI s ExaMAX, AirMax, ZipLine and Millipacs signal connectors.
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationRFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
More informationATP SERIES ATP Series
ATP SERIES ATP Series 87 ATP Series Overview ATP Series connectors are designed as a high-performance, cost-effective, thermoplastic solution to be used within the Marine, Heavy Equipment, Agricultural,
More information(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
More informationSEPTEMBER C.CS.1000 / GB
SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness
More informationDubox Product Presentation
Product Presentation Basics Portfolio Agenda 1. Value Proposition 2. Product Overview 3. Product Specifications 4. Features & Benefits 5. Part Numbers 6. Markets & Applications 7. Marcomm Collaterals Product
More information1Certified LR R Inner-housing lock. Outer-housing lock
.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector
More information