Power Supplies V7-T6-2 V7-T6-4 V7-T6-10 V7-T6-16 V7-T6-36 V7-T6-39 V7-T6-43

Transcription

1 Power Supplies Power Supplies.1 General Purpose and Sensor Power Supplies Product Selection Guide PSL Series PSC Series PSG Series ELC Series easyrelay Power Supply Sensor Power Supply V7-T-2 V7-T-4 V7-T- V7-T-1 V7-T-3 V7-T-39 V7-T-43 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-1

2 Revision notes Volume 7 Logic Control, Operator Interface and Connectivity Solutions, CA88E Tab Power Supplies Revision date Section Change page(s) Description /2/18 All All Complete tab revision. Remove PSS Series; insert PSC and PSG Series.

3 .1 Power Supplies Power Supplies Product Selection Guide Power Supply Series and Features Features Contents Description PSL Series PSC Series PSG Series ELC Series easyrelay Power Supply Sensor Power Supply PSL Series PSC Series PSG Series Universal AC input range 9 24 Vac ( Vdc) to W power output at 24 Vdc Operating temperature range from 25 to +71 C Output adjustable from 24 to 28 Vdc Support up to 3 microfarads of load capacitance Protection Class 2, double Isolation (no earth connection required) resulting in low leakage current Short-circuit protection using Hicc-up mode, non-latching and auto-recovery MTBF greater than, hours ensures uptime and reliability Protection from overvoltage, short circuit, overcurrent and overtemperature conditions Plastic housings provide the durability required to withstand harsh environments Finger-safe terminals LED indicating light for DC OK simplifies troubleshooting Redundancy modules keep loads up and running in the event of a device failure NEC Class 2 rated model 1% power surge output IP Protection degree Ultra-compact size Full power from 25 to +71 C operation Universal AC input voltage 2 Vac (1 375 Vdc) Up to 88.% efficiency at 23 Vac Extreme low temperature cold start at C Overvoltage / overcurrent / overtemperature protections Class 1 Protection (with primary earth connection) Product Selection Page V7-T-5 Page V7-T-11 Page V7-T-17 Technical Data and Page V7-T- Page V7-T-12 Page V7-T-19 Specifications Dimensions Page V7-T-8 Page V7-T-14 Page V7-T-3 Page V7-T-4 V7-T- V7-T-1 V7-T-3 V7-T-39 V7-T-43 General-purpose 12 Vdc and 24 Vdc output for 1.25 A to A loads Single-phase and three-phase inputs up to Vac 1% power surge output Redundancy modules Buffer module DIN rail mount Rugged metal and plastic housing options Heavy-duty screw and finger-safe terminals Hazardous Location Class I, Division 2 rated models NEC Class 2 rated model Protection from overvoltage, overcurrent and overtemperature conditions V7-T-2 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

4 Power Supplies.1 Power Supply Series and Features, continued Features ELC Series easyrelay Power Series Sensor Power Supplies Compact, low cost 24 Vdc control for loads up to 2 A Plastic enclosure can be DIN rail or panel mounted Single-phase ( 2 Vac) input Low profile power supplies for 12 Vdc or 24 Vdc applications 8 W, 3 W, W or W output power easyrelay styling provides optimal panel aesthetics Plastic enclosure can be DIN rail or panel mounted (with optional kit) CSA Class 1, Division 2 qualified Single-phase ( 2 Vac) input 27 Vdc supplies for tough sensor applications Rugged housings with integrated junction box for mounting outside of electrical enclosures Advanced diagnostic features Product Selection Page V7-T-37 Page V7-T- Page V7-T-44 Technical Data and Page V7-T-37 Page V7-T-41 Page V7-T-44 Specifications Dimensions Page V7-T-38 Page V7-T-42 Page V7-T-45 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-3

5 .1 Power Supplies PSL Series Contents Description PSL Series Catalog Number Selection Product Selection Technical Data and Specifications Power Derating Curves Dimensions PSC Series PSG Series ELC Series easyrelay Power Supply Sensor Power Supply Page V7-T-5 V7-T-5 V7-T- V7-T-8 V7-T-8 V7-T- V7-T-1 V7-T-3 V7-T-39 V7-T-43 PSL Series Product Description Eaton s single-phase Low Profile DIN Rail Power Supply series offers double isolated input with no earth connection required, resulting in low leakage current and a longer lifespan. The PSL series provides a universal input voltage range of 9 24 Vac, and a wide temperature range of 25 C to +71 C with greater than 8% efficiency. The lowprofile series is certified to safety standard according to IEC/EN/UL 9-1 Information Technology Equipment (ITE) and UL 8 Industrial Control Equipment (ICE). The series is also fully compliant with RoHS Directive 11/5/EU for environmental protection. NEC Class 2 and Limited Power Source (LPS) approvals are available for this product. Application Description The Low Profile is part of the PSL DIN Rail Power Supply series, which is designed for use in compact cabinets for home automations and the food and beverage industry. Applications include communication networks, sensors, PLCs and many other electrical systems. Features, Benefits and Functions Universal input voltage: 9 24 Vac or Vdc Under W power output at 24 Vdc Wide operating temperature range: 25 C to +71 C MTBF greater than, hours ensures uptime and reliability Protection from overvoltage, short circuit, overcurrent and overtemperature conditions Plastic housings provide the durability required to withstand harsh environments Standards and Certifications culus listed UL 8 UL 9-1 Hazardous Location, Class I, Div. 2, Groups A, B, C, D IEC EN NEC Class 2 Finger-safe terminals LED indicating light for DC OK simplifies troubleshooting Redundancy modules keep loads up and running in the event of a device failure NEC Class 2 rated model 1% power surge output IP protection degree Protection Class 2, double isolation No earth connection required CE marked RoHS compliant V7-T-4 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

6 Power Supplies.1 Catalog Number Selection Note: Catalog number selection breakdown shown below is for illustrative purposes only and not to be used to create new catalog number configurations. PSL Series Product Selection PSLE24RP Series PSL = Low Profile Power Supply PSL Series Output Power = W 3 = 3 W = W = W Power 24 Vdc output, single-phase power supplies ( 2 Vac nominal input) PSL E 24 R P Model E = Single-phase Description Output Voltage 24 = 24 Vdc Catalog Number W,.42 A output, plastic housing PSLE24RP 3 W, 1.25 A output, plastic housing PSL3E24RP W, 2.5 A output, plastic housing PSLE24RP W, 3.8 A output, plastic housing PSLE24RP Housing P = Plastic Terminals R = Finger-safe Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-5

7 .1 Power Supplies Technical Data and Specifications PSL Series PSLE24RP PSL3E24RP PSLE24RP PSLE24RP Input Nominal voltage 2 Vac 2 Vac 2 Vac 2 Vac / Vdc AC input range 9 24 Vac 9 24 Vac 9 24 Vac 9 24 Vac DC input range Vdc Vdc Vdc Vdc Input frequency range 47 3 Hz 47 3 Hz 47 3 Hz 47 3 Hz Nominal current <.3 A at 115 Vac, <. A at 23 Vac <.8 A at 115 Vac, <. A at 23 Vac <1.5 A at 115 Vac, <1. A at 23 Vac <2.2 A at 115 Vac, <1. A at 23 Vac Inrush current limitation Mains buffering at nominal load <15 A at 115 Vac, <3 A at 23 Vac > ms at 115 Vac, >3 ms at 23 Vac <25 A at 115 Vac, < A at 23 Vac >25 ms at 115 Vac, >3 ms at 23 Vac <3 A at 115 Vac, < A at 23 Vac >1 ms at 115 Vac, >3 ms at 23 Vac <3 A at 115 Vac, < A at 23 Vac > ms at 115 Vac, >3 ms at 23 Vac Turn-on time <3 sec. <3 sec. <3 sec. <1.5 sec. at 115 Vac, <1 sec. at 23 Vac Internal fuse T 1 A / 2 V T 3.15 A / 2 V T 3.15 A / 2 V T 3.15 A / 2 V Leakage current <.25 ma at 2 Vac <.25 ma at 2 Vac <.25 ma at 2 Vac <.25 ma at 2 Vac Output Power W 3 W W 91.2W Nominal output voltage 24 Vdc ±2% 24 Vdc ±2% 24 Vdc ±2% 24 Vdc ±2% Adjustment range Vdc Vdc Vdc Vdc Nominal current.42a 1.25 A 2.5 A 3.8 A Derating >55 C (2.5% / C) in vertical >55 C (2.5% / C) in vertical >55 C (2.5% / C) in vertical >55 C (2.5% / C) in vertical Power derating horizontal mounting N/A N/A N/A N/A Startup with capacitive loads Max. 3, μf Max. 3, μf Max. 3, μf Max. 3, μf Max. power dissipation idling / nominal 2 W 3.8 W 8.5 W 12 W load approx. Efficiency >8.% at 115 Vac and 23 Vac >83.% at 115 Vac and 23 Vac >8.% at 115 Vac and 23 Vac >85.% at 115 Vac, >87.% at 23 Vac Residual ripple / peak switching ( M Hz) <mvpp / 1mVpp < mvpp / <1 mvpp < mvpp / <1 mvpp < mvpp / <1 mvpp Parallel operation PSG48R24RM / PSG9R24RM / With o-ring diode Galvanic isolation PSG48R24RM / PSG9R24RM / With o-ring diode PSG48R24RM / PSG9R24RM / With o-ring diode PSG48R24RM / PSG9R24RM / With o-ring diode Input / output 3.K Vac 3.K Vac 3.K Vac 3.K Vac Input / ground N/A N/A N/A N/A Output / ground N/A N/A N/A N/A General / physical data Housing material Plastic (PC), enclosed Plastic (PC), enclosed Plastic (PC), enclosed Plastic (PC), enclosed Signals Green LED DC OK Green LED DC OK Green LED DC OK Green LED DC OK MTBF >, hr >, hr >, hr >, hr Dimensions (length) 91 mm 91 mm 91 mm 91 mm Dimensions (width) 18 mm 53 mm 71 mm 89.9 mm Dimensions (height) 55. mm 55. mm 55. mm 55. mm Weight (kg).5 kg.14 kg.24 kg.35 kg Terminals Finger-safe Finger-safe Finger-safe Finger-safe Wire size AWG 2-12 AWG AWG AWG (1 piece) AWG (2 pieces) Operating temperature 25 C to +71 C 25 C to +71 C 25 C to +71 C 25 C to +71 C Storage temperature 25 C to +85 C 25 C to +85 C 25 C to +85 C 25 C to +85 C Operating humidity <95% RH <95% RH <95% RH <95% RH V7-T- Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

8 Power Supplies.1 PSL Series, continued PSLE24RP PSL3E24RP PSLE24RP PSLE24RP General / physical data, continued Vibration IEC8 2, Sine wave: Hz at 19. m/s² (2G peak); min per cycle, min for all X, Y, Z directions IEC8 2, Sine wave: Hz at 19. m/s² (2G peak); min per cycle, min for all X, Y, Z directions IEC8 2, Sine wave: Hz at 19. m/s² (2G peak); min per cycle, min for all X, Y, Z directions IEC8 2, Sine wave: Hz at 19. m/s² (2G peak); min per cycle, min for all X, Y, Z directions Shock (operating) IEC8 2 27, Half sine wave: 4 G for a duration of IEC8 2 27, Half sine wave: 4 G for a duration of IEC8 2 27, Half sine wave: 4 G for a duration of IEC8 2 27, Half sine wave: 4 G for a duration of 22 ms, 3 shocks for each 3 directions, 22 ms, 3 shocks for each 3 directions, 22 ms, 3 shocks for each 3 directions, 22 ms, 3 shocks for each 3 directions, 9 times in total 9 times in total 9 times in total 9 times in total Pollution degree Altitude m m m m Certification and protection Safety entry low voltage SELV (EN 9) SELV (EN 9) SELV (EN 9) SELV (EN 9) Electrical safety UL/C UL recognized to UL 9 1 UL/C UL recognized to UL 9 1 UL/C UL recognized to UL 9 1 UL/C UL recognized to UL 9 1 (of information technology equipment) Industrial control equipment UL/C UL listed to UL 8 UL/C UL listed to UL 8 UL/C UL listed to UL 8 UL/C UL listed to UL 8 Class 2 power supply UL/C UL recognized to UL 9 1 UL/C UL recognized to UL 9 1 UL/C UL recognized to UL 9 1 UL/C UL recognized to UL 9 1 CE In conformance with EMC directive In conformance with EMC directive In conformance with EMC directive In conformance with EMC directive 14/3/EU and low-voltage directive 14/3/EU and low-voltage directive 14/3/EU and low-voltage directive 14/3/EU and low-voltage directive 14/35/EU 14/35/EU 14/35/EU 14/35/EU Immunity EN 524 (EN 4 2, 3, 4, 5,, 8,11) Emissions EN 532, EN 3 2 Class A, EN 3 3 EN 524 (EN 4 2, 3, 4, 5,, 8,11) EN 532, EN 3 2 Class A, EN 3 3 EN 524 (EN 4 2, 3, 4, 5,, 8,11) EN 532 Class A, EN 3 2 Class A, EN 3 3, EN 524 (EN 4 2, 3, 4, 5,, 8,11) EN 532, EN 3 2 Class A, EN 3 3, RoHS compliant Yes Yes Yes Yes Safety and protection Current limitation at short-circuits approx. I surge = 1% of Po Max typically I surge = 1% of Po Max typically I surge = 1% of Po Max typically I surge = 1% of Po Max typically Surge voltage protection against internal Yes Yes Yes Yes surge voltages Protection degree IP IP IP IP Safety class Class II (No primary earth connection is required) Class II without PE connection Class II without PE connection Class II without PE connection Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-7

9 .1 Power Supplies Power Derating Curves Vertical Mounting Position PSLE24RP 1 9 Vertical Mounting Position PSLE24RP Vertical Mounting Position PSL3E24RP Vertical Mounting Position PSLE24RP Dimensions Approximate Dimensions in mm Note: Dimensions are for reference only. PSLE24RP PSL3E24RP V7-T-8 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

10 Power Supplies.1 Approximate Dimensions in mm Note: Dimensions are for reference only. PSLE24RP PSLE24RP Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-9

11 .1 Power Supplies PSC Series Contents Description PSL Series PSC Series Catalog Number Selection Product Selection Technical Data and Specifications Power Derating Curves Dimensions PSG Series ELC Series easyrelay Power Supply Sensor Power Supply Page V7-T-4 V7-T-11 V7-T-11 V7-T-12 V7-T-14 V7-T-14 V7-T-1 V7-T-3 V7-T-39 V7-T-43 PSC Series Product Description The PSC Compact series operates with universal AC input range and offers full power up to 55 C. The output is adjustable from 24 to 28 volts and can support up to 3 microfarads of load capacitance. All models in the series are certified according to IEC/EN/UL 9-1 Information Technology Equipment (ITE) and UL 8 Industrial Control Equipment (ICE). The series is also fully compliant with RoHS Directive 11/5/EU for environmental protection. NEC Class 2 and Limited Power Source (LPS) approvals are available for this product. Application Description The ultra-compact and competitively priced Eaton Compact DIN Rail Power Supply series is designed for industrial applications requiring highly reliable power supply within a tight space. Simple to operate with HMI displays and industrial ethernet. Features, Benefits and Functions 3 W, W and W ratings Ultra-compact size Universal AC input voltage 2 Vac (1 375 Vdc) Up to 87% efficiency at 23 Vac Extreme low temperature cold start at C Overvoltage / overcurrent / over-temperature protections Under W power output at 24 Vdc Wide operating temperature range: C to +7 C Storage temperature: C to +85 C MTBF greater than 3, hours ensures uptime and reliability Protection from overvoltage, short circuit, overcurrent and over temperature conditions Plastic housings provide the durability required to withstand harsh environments Finger-safe terminals LED indicating light for DC OK simplifies troubleshooting Redundancy modules keep loads up and running in the event of a device failure NEC Class 1 rated model 1 1% power surge output IP protection degree Earth connection is required A green LED indicates output is present Standards and Certifications UL 8 NEC Class 1 IP CE marked RoHS compliant Note 1 Class 1 power supply is an NEC designation for a specific type of electrical circuit that is power-limited to 3 V and VA. This classification has an overcurrent protection device with a current limiter on the power source that supplies them and restricts the amount of supply current on the circuit in the event of an overload, short circuit or ground fault. The NEC allows Class 1 circuits and power supply circuits to occupy the same cable, enclosure or raceway in situations where the equipment power system is functionally associated. V7-T- Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

12 Power Supplies.1 Catalog Number Selection Note: Catalog number selection breakdown shown below is for illustrative purposes only and not to be used to create new catalog number configurations. PSC Series Product Selection PSCE24RP Series PSC = Compact Power Supply PSC Series Output Power 3 = 3 W = W = W Model E = Single-phase Power 24 Vdc output single-phase power supplies ( 2 Vac nominal input) PSC E 24 R P Description Output Voltage 24 = 24 Vdc Catalog Number 3 W, 1.25 A output, plastic housing PSC3E24RP W, 2.1 A output, plastic housing PSCE24RP W, 4. A output, plastic housing PSCE24RP Housing P = Plastic Terminals R = Finger-safe Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-11

13 .1 Power Supplies Technical Data and Specifications PSC Series PSC3E24RP PSCE24RP PSCE24RP Input Nominal voltage 2 Vac / Hz 2 Vac / Hz 2 Vac / Hz AC input range Vac Vac Vac DC input range Vdc Vdc Vdc Input frequency range 47 3 Hz 47 3 Hz 47 3 Hz Nominal current <.8 A at 115 Vac, <.4 A at 23 Vac <1. A at 115 Vac, <. A at 23 Vac <1.2 A at 115 Vac, <. A at 23 Vac Inrush current limitation <35 A at 115 Vac, < A at 23 Vac <35 A at 115 Vac, < A at 23 Vac <35 A at 115 Vac, < A at 23 Vac Mains buffering at nominal load ms typ. at 115 Vac, ms typ. at 23 Vac ms typ. at 115 Vac, 9 ms typ. at 23 Vac 25 ms typ. at 115 Vac, ms typ. at 23 Vac Turn-on time <3 sec. at 115 Vac, <1. sec. at 23 Vac <3 sec. at 115 Vac, <1.5 sec. at 23 Vac <3 sec. at 115 Vac, <1.5 sec. at 23 Vac Internal fuse T 3.15 A / 2 V T 3.15 A / 2 V T 3.15 A / 2 V Leakage current <1 ma at 2 Vac <1 ma at 2 Vac <1 ma at 2 Vac Output Power 3 W W 91.2 / 9 W Nominal output voltage 24 Vdc ±2% 24 Vdc ±2% 24 Vdc ±2% Adjustment range Vdc (Maximum power 3 W) Vdc (Maximum power W) Vdc (Maximum power 91.2W) Nominal current 1.25 A 2.1 A 3.8 A Derating C to C (2% / C), >55 C (3.33% / C) in Vertical C to C (2% / C), >55 C (3.33% / C) in Vertical C to C (2% / C), >55 C (3.33% / C) in Vertical Power derating horizontal mounting N/A N/A N/A Startup with capacitive loads Max. 3, μf Max. 3, μf Max. 3, μf Max. power dissipation idling /.5 W / 4.5 W.5 W / 7 W.4 W / W nominal load approx. Efficiency 87.% typ. at 115 Vac, 88.% typ. at 23 Vac 8.% typ. at 115 Vac, 88.% typ. at 23 Vac 87.% typ. at 115 Vac, 89.% typ. at 23 Vac Residual ripple/peak switching ( M Hz) <75 mvpp <75 mvpp <75 mvpp Parallel operation PSG48R24RM / PSG9R24RM / With o-ring Diode PSG48R24RM / PSG9R24RM / With o-ring Diode PSG48R24RM / PSG9R24RM / With o-ring Diode Galvanic isolation Input/output 3.K Vac 3.K Vac 3.K Vac Input/ground 3.K Vac 3.K Vac 3.K Vac Output/ground.5K Vac.5K Vac.5K Vac General / physical data Housing material Plastic (PC), enclosed Plastic (PC), enclosed Plastic (PC), enclosed Signals Green LED DC OK Green LED DC OK Green LED DC OK MTBF >3, hr >3, hr >3, hr Dimensions (length) 75 mm 75 mm 75 mm Dimensions (width) 21 mm 3 mm 45 mm Dimensions (height) 89.5 mm 89.5 mm mm Weight (kg).11 kg.18 kg.325 kg Terminals Finger safe Finger safe Finger safe Wire size AWG / AWG -12 AWG / AWG -12 AWG / AWG -12 Operating temperature C to +7 C C to +7 C C to +7 C Storage temperature C to +85 C C to +85 C C to +85 C Operating humidity 5 to 95% RH 5 to 95% RH 5 to 95% RH V7-T-12 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

14 Power Supplies.1 PSC Series, continued General / physical data, continued Vibration Operating PSC3E24RP PSCE24RP PSCE24RP IEC8 2, sine wave: Hz to Hz at 19. m/s²; displacement of.35 mm, min. per axis for all X, Y, Z directions Non-operating IEC8 2, Random: 5 Hz to Hz (2.9 Grms); min. per axis for all X, Y, Z directions Shock (operating) Operating IEC8 2 27, half sine wave: G for a duration of 11 ms, shock for 1 direction (X axis) IEC8 2, sine wave: Hz to Hz at 19. m/s²; displacement of.35 mm, min. per axis for all X, Y, Z directions IEC8 2, Random: 5 Hz to Hz (2.9 Grms); min. per axis for all X, Y, Z directions IEC8 2 27, half sine wave: G for a duration of 11 ms, shock for 1 direction (X axis) IEC8 2, sine wave: Hz to Hz at 19. m/s²; displacement of.35 mm, min. per axis for all X, Y, Z directions IEC8 2, Random: 5 Hz to Hz (2.9 Grms); min. per axis for all X, Y, Z directions IEC8 2 27, half sine wave: G for a duration of 11 ms, shock for 1 direction (X axis) Non-operating IEC8 2 27, half sine wave: G for a duration of 11 ms, 3 shocks for each 3 directions IEC8 2 27, half sine wave: G for a duration of 11 ms, 3 shocks for each 3 directions IEC8 2 27, half sine wave: G for a duration of 11 ms, 3 shocks for each 3 directions Pollution degree Altitude m m m Certification and protection Safety entry low voltage SELV (EN 9) SELV (EN 9) SELV (EN 9) Electrical safety (of information technology N/A N/A N/A equipment) Industrial control equipment UL/C UL listed to UL 8 UL/C UL listed to UL 8 UL/C UL listed to UL 8 Class 2 power supply UL/C UL listed to UL 8 UL/C UL listed to UL 8 UL/C UL listed to UL 8 CE In conformance with EMC directive 14/3/EU and low-voltage directive 14/35/EU Immunity EN 524, EN 1, EN 2 (EN 4 2, 3, 4, 5,, 8, 11) Emissions EN 532, EN 511, EN 3 3, EN 3, EN 4 In conformance with EMC directive 14/3/EU and low-voltage directive 14/35/EU EN 524, EN 1, EN 2 (EN 4 2, 3, 4, 5,, 8, 11) EN 532, EN 511, EN 3 3, EN 3, EN 4 In conformance with EMC directive 14/3/EU and low-voltage directive 14/35/EU EN 524, EN 1, EN 2 (EN 4 2, 3, 4, 5,, 8, 11) EN 532, EN 511, EN 3 3, EN 3, EN 4 RoHS compliant Yes Yes Yes Safety and protection Current limitation at short circuits approx. N/A N/A N/A Surge voltage protection against internal No No No surge voltages Protection degree IP IP IP Safety class Class I with primary earth connection Class I with primary earth connection Class I with primary earth connection Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-13

15 .1 Power Supplies Power Derating Curves Vertical Mounting Position PSC3E24RP Vertical Mounting Position PSCE24RP Dimensions Approximate Dimensions in mm Note: Dimensions are for reference only. PSC3E24RP.3 ± Vertical Mounting Position PSCE24RP ± V7-T-14 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

16 Power Supplies.1 Approximate Dimensions in mm Note: Dimensions are for reference only. PSCE24RP PSCE24RP / Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-15

17 .1 Power Supplies PSG Series Contents Description PSL Series PSC Series PSG Series Catalog Number Selection Product Selection Technical Data and Specifications Power Derating Curves Dimensions ELC Series easyrelay Power Supply Sensor Power Supply Page V7-T-4 V7-T- V7-T-17 V7-T-18 V7-T-19 V7-T-27 V7-T-3 V7-T-3 V7-T-39 V7-T-43 PSG Series Product Description Eaton s PSG Series of power supplies is designed to be a high-performance, highquality line of products covering a majority of 12 Vdc and 24 Vdc control applications. With global certifications, a compact size and an impressive operating temperature range, the PSG Series fits a wide variety of applications at a competitive price. Our expansive 22 model offering is able to provide solutions for most applications with PSG outputs ranging from 12 Vdc at 1.25 A up to 24 Vdc at A, plus redundancy and buffer modules to ensure uptime. Application Description The PSG Series is a line of general-purpose power supplies for use in a wide variety of industrial control applications. Applications include communication networks, sensors, PLCs and many other electrical systems. Each model is equipped with the options of a rugged metal or plastic housing, heavy-duty screw or finger-safe terminals and a variety of protection features, making the PSG one of the most versatile industrial power supply lines on the market. Features, Benefits and Functions Universal input voltages: 2 Vac for singlephase units, Vac for three-phase units General-purpose 12 Vdc and 24 Vdc adjustable output 1% power surge output Wide operating temperature range: 25 C to +8 C MTBF up to 1,, hours ensures uptime and reliability Protection from overvoltage, overcurrent and overtemperature conditions Rugged aluminum and plastic housings provide the durability required to stand up to harsh environments All-metal DIN rail mounting hardware Heavy-duty screw and finger-safe terminals LED indicating light for DC OK simplifies troubleshooting Conformal coated electronics Hazardous Location Class I, Division 2 rated models NEC Class 2 rated model Redundancy modules keep loads up and running in the event of a device failure Buffer module has the stored power needed to keep loads running through a short duration power failure Three-year standard warranty Standards and Certifications culus listed UL 8 CSA listed CSA 22.2 No Hazardous Location, Class I, Div. 2, Groups A, B, C, D IEC EN NEC Class 2 CE marked RoHS compliant Note: Some models may not carry all certifications listed. V7-T-1 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

18 Power Supplies.1 Catalog Number Selection Note: Catalog number selection breakdown shown below is for illustrative purposes only and not to be used to create new catalog number configurations. PSG Series Series PSG = PSG Power Supply 15 = 15 W 3 = 3 W = W = W Output Power 1 = 1 W 2 = 2 W 48 = 48 W 9 = 9 W PSG 2 F 24 R M Model E = Single-phase F = Three-phase R = Redundancy module B = Buffer module N = NEC Class 2 Output Voltage 24 = 24 Vdc 12 = 12 Vdc Blank = 24 Vdc Note: Not all combinations are available. See Pages V7-T-19 V7-T-2 for all available combinations. Housing M = Aluminum P = Plastic Blank = Aluminum Terminals S = Screw R = Finger-safe Blank = Screw Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-17

19 .1 Power Supplies Product Selection PSGE12SM PSGE PSGE24RM PSG48F24RM PSG48B24RM PSG Series Screw Type Terminals Connections for those that require multiple types of terminations and lug connections. Power Screw Type Terminals 12 Vdc output single-phase power supplies ( 2 Vac nominal input) 24 Vdc output single-phase power supplies ( 2 Vac nominal input) Description Catalog Number 15 W 1.25 A output, plastic housing PSG15E12SP 3 W 2.5 A output, plastic housings PSG3E12SP W 5 A output, aluminum housing PSGE12SM W 8.33 A output, aluminum housing PSGE12SM W 2.5 A output, aluminum housing PSGE W 2.5 A output, plastic housing PSGE24SP 1 W 5 A, aluminum housing PSG1E 2 W A, aluminum housing PSG2E 48 W A, aluminum housing PSG48E Finger-Safe Terminals Connections for those that require IP terminals for all your safety solutions Power Finger-Safe Terminals 24 Vdc output single-phase power supplies ( 2 Vac nominal input) 24 Vdc output, three-phase power supplies ( Vac nominal input) Module power supplies (24 Vdc input) Description Catalog Number W 2.5 A output, aluminum housing PSGE24RM 1 W 5 A, aluminum housing PSG1E24RM 2 W A, aluminum housing PSG2E24RM 48 W A, aluminum housing PSG48E24RM W 2.5 A output, plastic housing, NEC Class 2 PSGN24RP W 2.5 A, aluminum housing PSGF24RM 1 W 5 A, aluminum housing PSG1F24RM 2 W A, aluminum housing PSG2F24RM 48 W A, aluminum housing PSG48F24RM 9 W A, aluminum housing PSG9F24RM Buffer module, 48 W A output, aluminum housing Redundancy module, 48 W < A output, aluminum housing Redundancy module, 9 W < A output, aluminum housing PSG48B24RM PSG48R24RM PSG9R24RM V7-T-18 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

20 Power Supplies.1 Technical Data and Specifications PSG Series Single-Phase PSG15E12SP PSG3E12SP PSGE12SM PSGE12SM PSGE PSGE24SP PSGE24RM Input Nominal voltage 2 Vac 2 Vac 2 Vac 2 Vac 2 Vac 2 Vac 2 Vac AC input range Vac Vac Vac Vac Vac Vac Vac DC input range Vdc Vdc Vdc Vdc Vdc Vdc Vdc Frequency 47 3 Hz 47 3 Hz 47 3 Hz 47 3 Hz 47 3 Hz 47 3 Hz 47 3 Hz Nominal current 1 <.37 A <.7 A <1.35 A <2.5 A 1.1 A <1. A <1.4 A Inrush current limitation 1 <3 A <3 A < A < A 3 A < A < A Internal fuse T3.15 AH / 2 V T3.15 AH / 2 V T3.15 AH / 2 V T3.15 AH / 2 V T3.15 AH / 2 V T3.15 AH / 2 V T3.15 AH / 2 V External fusing 4 A or A 4 A or A A, A or 1 A A, A or 1 A A, A or 1 A A, A or 1 A A, A or 1 A Leakage current <1 ma <1 ma <1 ma <1 ma <1 ma <1 ma <1 ma Output Power 15 W 3 W W W W W W Nominal output voltage 12 Vdc ±2% 12 Vdc ±2% 12 Vdc ±2% 12 Vdc ±2% 24 Vdc ±2% 24 Vdc ±2% 24 Vdc ±2% Adjustment range Vdc Vdc Vdc Vdc Vdc Vdc Vdc Nominal current 1.25 A 2.5 A 5 A 8.33 A 2.5 A 2.5 A 2.5 A Startup with capacitive loads Max. μf Max. μf Max. 8 μf Max., μf Max. 8 μf Max. 8 μf Max. 8 μf Efficiency >84% at 115 Vac, >85% at 115 Vac >85% at 115 Vac >85.5% at 115 Vac, >85% typ >8% at 115 Vac, >9% at 115 Vac >83% at 23 Vac and 23 Vac and 23 Vac >87.5% at 23 Vac >87% at 23 Vac and 23 Vac Current surge A 3.75 A 7.5 A A 3.75 A 3.75 A 3.75 A Current surge time 3 s 3 s 3 s 3 s 1 s (at s intervals) 3 s 5 s Residual ripple/peak switching ( MHz) < mvpp < mvpp < mvpp < mvpp < mv / <2 mvpp Note 1 Ratings for single-phase models are at 115 Vac; three-phase models are at Vac. < mv / <2 mvpp < mvpp / <1 mvpp Turn-on time <2.5 s <2.5 s <2.5 s <.s <2.5 s <3 s <2s Mains buffering at nominal >22 ms >22 ms >22 ms >22 ms > ms > ms > ms load (typ.) 1 Parallel operation With o-ring diode With o-ring diode With o-ring diode With o-ring diode PSG48R24RM / PSG9R24RM / With o-ring diode Galvanic Isolation Input/output 4 k Vac 4 k Vac 4 k Vac 4 k Vac 4 k Vac (type test) / 3 k Vac (routine test) Input/ground 1.5 k Vac 1.5 k Vac 1.5 k Vac 1.5 k Vac 1.5 k Vac (type test) / 1.5 k Vac (routine test) PSG48R24RM / PSG9R24RM / With o-ring diode 4 k Vac 4 k Vac PSG48R24RM / PSG9R24RM / With o-ring diode 1.5 k Vac 1.5 k Vac Output/ground 1.5 k Vac 1.5 k Vac 1.5 k Vac 1.5 k Vac 1.5 k Vac (type test) / 1.5 k Vac 1.5 k Vac Vac (routine test) General/Physical Data Housing material Plastic Plastic Aluminum Aluminum Aluminum Plastic Aluminum Signals Green LED for DC OK Green LED for DC OK Green LED for DC OK Green LED for DC OK Green LED for DC OK Green LED for DC OK Green LED for DC OK MTBF >1,, hr >1,, hr >8, hr >8, hr >8, hr >8, hr >1,, hr Dimensions (L) mm mm 121 mm 121 mm 121 mm 1. mm 121 mm Dimensions (W) 32 mm 32 mm 32 mm mm 32 mm 32 mm 32 mm Dimensions (H). mm. mm 1 mm mm 1 mm 113 mm 125 mm Weight (kg) Terminals Screw Screw Screw Screw Screw Screw Finger-safe, removable Wire size AWG AWG AWG AWG AWG AWG AWG Operating temperature C to +75 C C to +75 C C to +75 C C to +75 C C to +75 C C to +75 C C to +8 C Storage temperature 25 C to +85 C 25 C to +85 C 25 C to +85 C 25 C to +85 C 25 C to +85 C 25 C to +85 C 25 C to +85 C Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-19

21 .1 Power Supplies PSG Series, continued Single-Phase PSG15E12SP PSG3E12SP PSGE12SM PSGE12SM PSGE PSGE24SP PSGE24RM General/Physical Data, continued Power derating vertical mounting Power derating horizontal mounting Operating humidity > C derate power by 2.5% / C, >7 C derate power by 4% / C > C derate power by 2.5% / C, >7 C derate power by 4% / C > C derate power by 2.5% / C, >7 C derate power by 4% / C > C derate power by 2.5% / C N/A N/A N/A > C derate power by 2.5% / C, >7 C derate power by 4% / C <95% RH, noncondensing <95% RH, noncondensing <95% RH, noncondensing <95% RH, noncondensing > C derate power by 2.5% / C < C to C derate power by 1% / C, > C derate power by 2.5% / C, >7 C derate power by 4% / C > C derate power by 2.5% / C N/A N/A > C derate power by 2.5% / C <95% RH, noncondensing <95% RH, noncondensing <95% RH, noncondensing Vibration to 1 Hz,.35 mm acc. m/s 2, single amplitude (5G max.) for 9 min. in each X, Y and Z directions, in accordance with IEC 8-2- Pollution degree Climatic class 3K3 according to EN 721 3K3 according to EN 721 3K3 according to EN 721 3K3 according to EN 721 3K3 according to EN 721 3K3 according to EN 721 3K3 according to EN 721 Safety and Protection Transient surge voltage Varistor Varistor Varistor Varistor Varistor Varistor Varistor Surge voltage protection against internal surge Yes Yes Yes Yes Yes Yes Yes Safety class Shock Class I with ground connection 3 G (3 m/s 2 ) in all directions according to IEC Class I with ground connection 3 G (3 m/s 2 ) in all directions according to IEC Class I with ground connection 3 G (3 m/s 2 ) in all directions according to IEC Class I with ground connection 3 G (3 m/s 2 ) in all directions according to IEC Class I with ground connection 3 G (3 m/s 2 ) in all directions according to IEC Class I with ground connection 3 G (3 m/s 2 ) in all directions according to IEC Class I with ground connection 3 G (3 m/s 2 ) in all directions according to IEC V7-T- Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

22 Power Supplies.1 PSG Series, continued Single-Phase, continued PSGN24RP PSG1E PSG1E24RM PSG2E PSG2E24RM PSG48E PSG48E24RM Input Nominal voltage 2 Vac 2 Vac 2 Vac 2 Vac 2 Vac 2 Vac 2 Vac AC input range Vac Vac Vac Vac Vac Vac Vac DC input range N/A Vdc Vdc Vdc Vdc Vdc Vdc Frequency 47 3 Hz 47 3 Hz 47 3 Hz 47 3 Hz 47 3 Hz 47 3 Hz 47 3 Hz Nominal current 1 <1.5 A at Vac 1.4 A <2.2 A 2.9 A <2.5 A 5.7 A <5 A Inrush current limitation 1 < A <8 A <35 A N/A <35 A N/A <35 A Internal fuse T3.15 AH / 2 V T3.15 AH / 2 V T4 AH / 2 V T.3 AH / 2 V T.3 AH / 2 V FH / 2 A T8 AH / 2 V External fusing A, A or 1 A A, A or 1 A A, A or 1 A A or 1 A A or 1 A A or 1 A A or 1 A Leakage current <1 ma <1 ma <1 ma <3.5 ma <1 ma <1 ma <3 ma Output Power W 1 W 1 W 2 W 2 W 48 W 48 W Nominal output voltage 24 Vdc ±2% 24 Vdc ±2% 24 Vdc ±2% 24 Vdc ±2% 24 Vdc ±2% 24 Vdc ±2% 24 Vdc ±2% Adjustment range Vdc Vdc Vdc Vdc Vdc Vdc Vdc Nominal current 2.5 A 5 A 5 A A A A A Startup with capacitive loads Max. 8 μf Max., μf Max., μf Max., μf Max., μf Max., μf Max., μf Efficiency >8% at 115 Vac, >84% typ >89% at 115 Vac, >84% typ >9% at 115 Vac >8% typ >9% at 115 Vac >87% at 23 Vac >9% at 23 Vac and 23 Vac and 23 Vac Current surge N/A 7.5 A 7.5 A 15 A 15 A 3 A 3 A Current surge time N/A 1 s (at s intervals) 5 s 1 s (at s intervals) 5 s 1 s (at s intervals) 5 s Residual ripple/peak switching ( MHz) < mvpp / <2 mvpp < mv / <2 mvpp Note 1 Ratings for single-phase models are at 115 Vac; three-phase models are at Vac. < mvpp / <1 mvpp < mv / <2 mvpp < mvpp / <1 mvpp < mv / <2 mvpp Turn-on time <3 s <1 s <1 s <1 s <1 s <1 s <1 s Mains buffering at nominal > ms >35ms > ms > ms > ms > ms > ms load (typ.) 1 Parallel operation PSG48R24RM / PSG9R24RM / With o-ring diode Galvanic Isolation PSG48R24RM / PSG9R24RM / With o-ring diode Input/output 4 k Vac 4 k Vac (type test) / 3 k Vac (routine test) Input/ground 1.5 k Vac 1.5 k Vac (type test) / 1.5 k Vac (routine test) PSG48R24RM / PSG9R24RM / With o-ring diode PSG48R24RM / PSG9R24RM / With o-ring diode 4 k Vac 4 k Vac (type test) / 3 k Vac (routine test) 1.5 k Vac 1.5 k Vac (type test) / 1.5 k Vac (routine test) PSG48R24RM / PSG9R24RM / With o-ring diode PSG48R24RM / PSG9R24RM / With o-ring diode 4 k Vac 4 k Vac (type test) / 3 k Vac (routine test) 1.5 k Vac 1.5 k Vac (type test) / 1.5 k Vac (routine test) < mvpp PSG48R24RM / PSG9R24RM / With o-ring diode Output/ground 1.5 k Vac 1.5 k Vac (type test) / 1.5 k Vac 1.5 k Vac (type test) / 1.5 k Vac 1.5 k Vac (type test) / 1.5 k Vac Vac (routine test) Vac (routine test) Vac (routine test) General/Physical Data Housing material Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Signals Green LED for DC OK Green LED for DC OK Green LED for DC OK Green LED for DC OK Green LED for DC OK Green LED for DC OK Green LED for DC OK MTBF >8, hr >8, hr >8, hr >3, hr >, hr >3, hr >, hr Dimensions (L) 1. mm 121 mm 121 mm 121 mm 121 mm 121 mm 121 mm Dimensions (W) 32 mm 32 mm mm 85 mm 85 mm mm 144 mm Dimensions (H) mm 1 mm mm mm mm 115 mm 118. mm Weight (kg) Terminals Finger-safe, fixed Screw Finger-safe, removable Screw Finger-safe, removable Screw 4 k Vac 1.5 k Vac Finger-safe, fixed Wire size AWG 22 AWG AWG 12 AWG AWG 1 12 AWG 1 14 (input) AWG 18 AWG 12 (output) Operating temperature C to +8 C C to +75 C C to +8 C C to +75 C C to +8 C C to +75 C 25 C to +75 C Storage temperature 25 C to +85 C 25 C to +85 C 25 C to +85 C 25 C to +85 C 25 C to +85 C 25 C to +85 C 25 C to +85 C Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-21

23 .1 Power Supplies PSG Series, continued Single-Phase, continued PSGN24RP PSG1E PSG1E24RM PSG2E PSG2E24RM PSG48E PSG48E24RM General/Physical Data, continued Power derating vertical mounting Power derating horizontal mounting Operating humidity Vibration > C derate power by 2.5% / C, >7 C derate power by 4% / C > C derate power by 2.5% / C, >7 C derate power by 4% / C <95% RH, noncondensing to Hz,.35 mm acc. 3 m/s 2, single amplitude (3 G max.) for min. in each X, Y and Z directions, in accordance with IEC 8-2- > C derate power by 2.5% / C N/A <95% RH, noncondensing to 1 Hz,.35 mm acc. m/s 2, single amplitude (5G max.) for 9 min. in each X, Y and Z directions, in accordance with IEC 8-2- > C derate power by 2.5% / C > C derate power by 2.5% / C <95% RH, noncondensing to 1 Hz,.35 mm acc. m/s 2, single amplitude (5G max.) for 9 min. in each X, Y and Z directions, in accordance with IEC 8-2- > C derate power by 2.5% / C, >7 C derate power by 4% / C > C derate power by 2.5% / C > C derate power by 2.5% / C N/A N/A N/A N/A <95% RH, noncondensing to 1 Hz,.35 mm acc. m/s 2, single amplitude (5G max.) for 9 min. in each X, Y and Z directions, in accordance with IEC 8-2- <95% RH, noncondensing to 1 Hz,.35 mm acc. m/s 2, single amplitude (5G max.) for 9 min. in each X, Y and Z directions, in accordance with IEC 8-2- <95% RH, noncondensing to 1 Hz,.35 mm acc. m/s 2, single amplitude (5G max.) for 9 min. in each X, Y and Z directions, in accordance with IEC 8-2- > C derate power by 2.5% / C, >7 C to 75 C derate power by 5% / C <95% RH, noncondensing to 1 Hz,.35 mm acc. m/s 2, single amplitude (5G max.) for 9 min. in each X, Y and Z directions, in accordance with IEC 8-2- Pollution degree Climatic class 3K3 according to EN 721 3K3 according to EN 721 3K3 according to EN 721 3K3 according to EN 721 3K3 according to EN 721 3K3 according to EN 721 3K3 according to EN 721 Safety and Protection Transient surge voltage Varistor Varistor Varistor Varistor Varistor Varistor Varistor Surge voltage protection against internal surge Yes Yes Yes Yes Yes Yes Yes Safety class Shock Class I with ground connection 3 G (3 m/s 2 ) in all directions according to IEC Class I with ground connection 3 G (3 m/s 2 ) in all directions according to IEC Class I with ground connection 3 G (3 m/s 2 ) in all directions according to IEC Class I with ground connection 3 G (3 m/s 2 ) in all directions according to IEC Class I with ground connection 3 G (3 m/s 2 ) in all directions according to IEC Class I with ground connection 3 G (3 m/s 2 ) in all directions according to IEC Class I with ground connection 3 G (3 m/s 2 ) in all directions according to IEC V7-T-22 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

24 Power Supplies.1 PSG Series, continued Three-Phase PSGF24RM PSG1F24RM PSG2F24RM PSG48F24RM PSG9F24RM Input Nominal voltage 3 x Vac 3 x Vac 3 x Vac 3 x Vac 3 x Vac AC input range 3 x 3 Vac 3 x 3 Vac 3 x 3 Vac 3 x 3 Vac 3 x 3 Vac DC input range 4 8 Vdc 4 8 Vdc 4 8 Vdc 4 8 Vdc 4 8 Vdc Frequency 47 3 Hz 47 3 Hz 47 3 Hz 47 3 Hz 47 3 Hz Nominal current 1 <.3 A <.5 A <.75 A <1 A <1.7 A Inrush current limitation 1 <3 A <3 A < A < A < A Internal fuse T 3.15 AH / V, V T 3.15 AH / V, V T 3.15 AH / V, V T 3.15 AH / V T 4 AH / V External fusing 3 x circuit breakers 3 x circuit breakers 3 x circuit breakers 3 x circuit breakers 3 x circuit breakers A, A or 1 A A, A or 1 A A, A or 1 A A, A or 1 A A or 1 A Leakage current <3.5 ma <3.5 ma <3.5 ma <3.5 ma <3.5 ma Output Power W 1 W 2 W 48 W 9 W Nominal output voltage 24 Vdc ±2% 24 Vdc ±2% 24 Vdc ±2% 24 Vdc ±2% 24 Vdc ±2% Adjustment range Vdc Vdc Vdc Vdc Vdc Nominal current 2.5 A 5 A A A A Startup with capacitive loads Max., μf Max., μf Max., μf Max., μf Max., μf Efficiency >8% at 3 x Vac and 3 x Vac >88% at 3 x Vac and 3 x Vac Note 1 Ratings for single-phase models are at 115 Vac; three-phase models are at Vac. >92% at 3 x Vac and 3 x Vac >91% at 3 x Vac and 3 x Vac >92% at 3 x Vac and 3 x Vac Current surge 3.75 A 7.5 A 15 A 3 A A Current surge time 5 s 5 s 5 s 5 s 5 s Residual ripple/peak switching < mvpp < mvpp <1 mvpp <1 mvpp <2 mvpp ( MHz) Turn-on time <1 s <1 s <1 s <1 s <1.5 s Mains buffering at nominal load (typ.) 1 > ms > ms > ms > ms > ms Parallel operation PSG48R24RM / PSG9R24RM / With o-ring diode Galvanic Isolation PSG48R24RM / PSG9R24RM / With o-ring diode PSG48R24RM / PSG9R24RM / With o-ring diode PSG48R24RM / PSG9R24RM / With o-ring diode PSG9R24RM / With o-ring diode Input/output 4 k Vac 4 k Vac 4 k Vac 4 k Vac 4 k Vac Input/ground 2 k Vac 2 k Vac 2 k Vac 2 k Vac 2 k Vac Output/ground 1.5 k Vac 1.5 k Vac 1.5 k Vac 1.5 k Vac 1.5 k Vac General/Physical Data Housing material Aluminum Aluminum Aluminum Aluminum Aluminum Signals Green LED for DC OK Green LED for DC OK Green LED for DC OK Green LED for DC OK Green LED for DC OK MTBF >, hr >, hr >3, hr >, hr >3, hr Dimensions (L) 121 mm 121 mm 121 mm 121 mm 121 mm Dimensions (W) mm mm 7 mm 1 mm 255 mm Dimensions (H) mm mm mm mm mm Weight (kg) Terminals Finger-safe, fixed Finger-safe, fixed Finger-safe, fixed Finger-safe, fixed Finger-safe, fixed Wire size AWG AWG AWG (input) AWG 1 12 (output) AWG 18 8 (input) AWG 12 (output) AWG 18 8 (input) AWG 12 (output) Operating temperature 25 C to +75 C 25 C to +75 C 25 C to +75 C 25 C to +8 C 25 C to +5 C Storage temperature 25 C to +85 C 25 C to +85 C 25 C to +85 C 25 C to +85 C 25 C to +85 C Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-23

25 .1 Power Supplies PSG Series, continued Three-Phase, continued PSGF24RM PSG1F24RM PSG2F24RM PSG48F24RM PSG9F24RM General/Physical Data, continued Power derating vertical mounting Power derating horizontal mounting > C derate power by 2.5% / C, >7 C derate power by 5% / C >45 C derate power by 2.5% / C, >55 C derate power by 1.% / C, >7 C derate power by 5% / C > C derate power by 2.5% / C, >7 C derate power by 5% / C > C derate power by 2.5% / C, > C derate power by 5% / C > C derate power by 2.5% / C, >7 C derate power by 5% / C > C derate power by 2.5% / C, > C derate power by 5% / C > C derate power by 2.5% / C, >7 C derate power by 5% / C N/A > C derate power by 2.5% / C Operating humidity <95% RH, noncondensing <95% RH, noncondensing <95% RH, noncondensing 5 to 95% RH, noncondensing 5 to 95% RH, noncondensing Vibration to Hz,.35 mm acc. 3 m/s 2, single amplitude (3 G max.) for min. in each X, Y and Z directions, in accordance with IEC 8-2- Pollution degree Climatic class 3K3 according to EN 721 3K3 according to EN 721 3K3 according to EN 721 3K3 according to EN 721 3K3 according to EN 721 Safety and Protection Transient surge voltage Varistor Varistor Varistor Varistor Varistor Surge voltage protection against internal surge Yes Yes Yes Yes Yes Safety class Class I with ground connection Class I with ground connection Class I with ground connection Class I with ground connection Class I with ground connection Shock 3 G (3 m/s 2 ) in all directions according to IEC G (3 m/s 2 ) in all directions according to IEC G (3 m/s 2 ) in all directions according to IEC G (3 m/s 2 ) in all directions according to IEC G (3 m/s 2 ) in all directions according to IEC N/A V7-T-24 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

26 Power Supplies.1 PSG Series, continued Redundancy Modules PSG48R24RM PSG9R24RM Input Nominal voltage Vdc Vdc DC input range 22 Vdc 22 Vdc Nominal current < A < A Inrush current limitation <25 A < A Output Nominal output voltage Vin.5 V (typ.) Vin.5 V (typ.) Nominal current < A < A Efficiency >97% typ. >97% typ. Galvanic Isolation Input/ground 1.5 k Vac 1.5 k Vac Output/ground 1.5 k Vac 1.5 k Vac General/Physical Data Housing material Aluminum Aluminum Signals 1 Green LED for DC Vin1 OK and DC Vin2 OK Green LED for DC Vin1 OK and DC Vin2 OK MTBF >8, hr >8, hr Dimensions (L) 121 mm 121 mm Dimensions (W) mm mm Dimensions (H) mm mm Weight (kg) Terminals Finger safe fixed Finger safe fixed Wire size AWG 12 AWG 12 Operating temperature C to +8 C C to +8 C Storage temperature C to +85 C C to +85 C Power de-rating vertical mounting > C de-rate power by 2.5% / C > C de-rate power by 2.5% / C Power de-rating horizontal mounting N/A N/A Operating humidity < 95% RH, noncondensing < 95% RH, noncondensing Vibration to Hz,.35 mm acc. 3m/s², single amplitude (3 G max.) for min. to Hz,.35 mm acc. 3m/s², single amplitude (3 G max.) for min. in each X, Y and Z directions, in accordance with IEC 8-2- in each X, Y and Z directions, in accordance with IEC 8-2- Pollution degree 2 2 Climatic class 3K3 according to EN 721 3K3 according to EN 721 Safety and Protection Safety class Class 2 with ground connection Class III with ground connection Shock 3 G (3 m/s²) in all directions according to IEC G (3 m/s²) in all directions according to IEC Note 1 The LED will turn on when the Vin1 and Vin2 > 18 V ±5% (for 24 V system) or > 3 V ±5% (for 48 V system) and not more than 3 V (for 24 V system) or not more than V (for 48 V system), the relay contacts will be closed. If Vin1 and Vin2 is under or over this range, the LED will be turned off. Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-25

27 .1 Power Supplies PSG Series, continued Buffer Module PSG48B24RM Input Nominal voltage 24 Vdc DC input range Vdc Maximum voltage 35 Vdc Current Charging mode: <. A Discharging mode: A max. Power (standby mode) 2.5 W average Maximum signal (inhibit) 35 V / ma Max inrush current < A Charging time < 3s Output Nominal voltage 24 Vdc typ. DC adjustment range Switch = Fix 22V : Buffering starts if terminal voltage falls below 22 V Switch = Vin-1V (Factory Setting): Buffering starts if terminal voltage is decreased by >1 V Maximum voltage 35 Vdc Current A max. buffering time 2 ms min. at 24 V/ A load, 5 s min. at 24 V/1 A load Maximum signal 35 V / ma PARD (MHz) < mvpp Galvanic isolation Input/ground 1.5 k Vac Output/ground 1.5 k Vac Signal/ground 1.5 k Vac General/Physical Data Housing material Aluminum Signals Green LED off: unit is discharged or Vin < 22 Vdc Green LED on: unit is fully charged Green LED blinking slowly: unit is charging Green LED blinking quickly: unit is discharging MTBF >8, hr Parallel connection Yes Series connection No Dimensions (L) 121 mm Dimensions (W) 7 mm Dimensions (H) 1.1 mm Weight (kg).7 Terminals Finger safe fixed Wire Size Input / Output: AWG 12 Signal: AWG 24 Operating temperature 25 C to +75 C Storage temperature 25 C to +85 C Power de-rating vertical mounting >7 C de-rate power by 5% / C Operating humidity < 95% RH, noncondensing Vibration to Hz,.35 mm acc. 3 m/s², single amplitude (3 G max.) for min. in each X, Y and Z directions, in accordance with IEC 8-2- Pollution degree 2 Safety and Protection Shock 3 G (3 m/s²) in all directions according to IEC Safety class Class I with ground connection V7-T-2 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

28 Power Supplies.1 Power Derating Curves Vertical Mounting Position PSG15E12SP Vertical Mounting Position PSG3E12SP Vertical Mounting Position PSGE12SM Vertical and Horizontal Mounting Position PSGE12SM Vertical Mounting Horizontal Mounting Vertical Mounting Position PSGE Vertical Mounting Position PSGE24SP Vertical and Horizontal Mounting Position PSGE24RM Vertical and Horizontal Mounting Position PSGN24RP Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-27

29 .1 Power Supplies Vertical Mounting Position PSG1E Vertical and Horizontal Mounting Position PSG1E24RM Vertical Mounting Position PSG2E Vertical and Horizontal Mounting Position PSG2E24RM Vertical Mounting Horizontal Mounting Vertical Mounting Position PSG48E Vertical Mounting Position PSG48E24RM Vertical and Horizontal Mounting Position PSGF24RM Vertical Mounting Horizontal Mounting Vertical and Horizontal Mounting Position PSG1F24RM Vertical Mounting Horizontal Mounting V7-T-28 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

30 Power Supplies.1 Vertical and Horizontal Mounting Position PSG2F24RM Vertical Mounting Position PSG48F24RM Vertical Mounting Horizontal Mounting Vertical Mounting Position PSG9F24RM Vertical Mounting Position PSG48R24RM Vertical Mounting Position PSG9R24RM Vertical Mounting Position PSG48B24RM Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-29

31 .1 Power Supplies Dimensions Approximate Dimensions in mm Note: Dimensions are for reference only. PSG15E12SP 32. (C). 9. PSGE12SM 32. Catalog Number: PSGE12SM 24V 2.5A CAUTION HOT SURFACE Adjust DC OK SPEC LABEL -2V~1.5A -Hz 5. ±.2 PSG3E12SP PSGE12SM Catalog Number: PSGE12SM 24V 8.33A Adjust DC OK SPEC LABEL 2V~ 2.5A Hz 5. V7-T-3 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

32 Power Supplies.1 Approximate Dimensions in mm Note: Dimensions are for reference only. PSGE 32. Catalog Number: PSGE 24V 2.5A CAUTION HOT SURFACE PSGE24RM 32. ± ± ±.2 Adjust 121. DC OK SPEC LABEL 121. ±.4 Spec Label 5. ±.2-2V~1.5A -Hz PSGE24SP 32. ±..8 ±.4. ± ±. 1. ±.3 PSGN24RP 32. ±. 1.5 ±.4.8 (ref.) ± ±.4 Catalog Number: PSGE24SP 24V 2.5A Adjust DC OK 1. SPEC LABEL 12. ± ±.2 Catalog Number: PSGN24RP 24V 2.5A Adjust DC OK NEC Class 2 1. ±.3 SPEC LABEL V~ 1.5A Hz 2V~ 1.5A Hz (ref.) Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-31

33 .1 Power Supplies Approximate Dimensions in mm Note: Dimensions are for reference only. PSG1E. ±.2 DC 24V 5A PSG2E Adjust DC OK 121. ± V A Catalog Number: PSG2E Adjust DC OK SPEC LABEL CAUTION HOT SURFACE AC -2V 2A - Hz ±. -2V~5A -Hz ±.2 PSG1E24RM. 11. ± ±.2 PSG2E24RM ± Catalog Number: PSG1E24RM 24V 5A Adjust DC OK SPEC LABEL 24V A Catalog Number: PSG2E24RM 2V~ 3.5A Hz Adjust DC OK SPEC LABEL CAUTION HOT SURFACE 5. 2V~ 2.5A Hz 5. V7-T-32 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

34 Power Supplies.1 Approximate Dimensions in mm Note: Dimensions are for reference only. PSG48E. 7.1 PSGF24RM Catalog Number: PSG48E N L Adjust. ±.1 24V 2.5A Adjust DC OK Catalog Number: PSGF24RM Three-Phase V ~.3A Hz ±.35-2V~ A -Hz PSG48E24RM 121. Catalog Number: PSG48E24RM DC OK 144. ±1. 24V 2V ~A Hz 24V A N L + + Adjust DC OK A PSG1F24RM. 24V 5A Adjust DC OK Catalog Number: PSG1F24RM Three-Phase V ~.3A Hz ± ± Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-33

35 .1 Power Supplies Approximate Dimensions in mm Note: Dimensions are for reference only. PSG2F24RM PSG9F24RM ±.35 24V 5. 5A Catalog Number: PSG2F24RM Adjust DC OK Three-Phase V ~.75A Hz PSG48F24RM SPEC LABEL ±.7. 24V A Catalog Number: PSG9F24RM Three-Phase V ~1.7A Hz PSG48R24RM Adjust DC OK ± SPEC LABEL V 5. A Catalog Number: PSG48F24RM Three-Phase V ~1A Hz + + Adjust DC OK 121. ±.8 SPEC LABEL V V A Catalog Number: PSG48R24SM V in1 V in2 Com V out V in1 OK V in2 OK OK * SPEC LABEL 7.1 (ref) A Max. Redundancy Module 5. V7-T-34 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

36 Power Supplies.1 Approximate Dimensions in mm Note: Dimensions are for reference only. PSG9R24RM 22V V A Catalog Number: PSG9R24RM. V in1 V in2 Com V out V in1 V in2 OK OK OK ± SPEC LABEL PSG48B24RM 5. 24V A Catalog Number: PSG48B24RM Status 121. SPEC LABEL 9. ± ± A Max. Redundancy Module 5. Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-35

37 .1 Power Supplies ELC Series Contents Description PSL Series PSC Series PSG Series ELC Series Product Selection Technical Data and Specifications Dimensions easyrelay Power Supply Sensor Power Supply Page V7-T-4 V7-T- V7-T-1 V7-T-37 V7-T-37 V7-T-38 V7-T-39 V7-T-43 ELC Series Product Description Eaton s ELC power supplies are the perfect products for those applications requiring a very compact and low-cost source for 24 Vdc power. While these products were developed to be a perfect match for our Eaton Logic Controllers, they can be used in a variety of applications. The lightweight, DIN rail mounted enclosures, wide input voltage range and robust screw terminals make these power supplies easy to install and use. They are available in 1 A and 2 A models. Features, Benefits and Functions Universal input voltage: Vac Compact size, with common depth and height across models allows for common panel depths and family consistency ELC styling provides maximum aesthetic appeal when used with Eaton Logic Controllers Front-mounted pressure plate screw terminals for a robust connection Removable finger-safe protective cover for terminals Power ON indication LED Integrated mounting hardware for panel mounting or DIN rail mounting Standards and Certifications culus listed CE marked RoHS compliant V7-T-3 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

38 Power Supplies.1 Product Selection ELC-PS1 Technical Data and Specifications ELC Series ELC Series Catalog Description Number 24 watt, 1 amp power supply ELC-PS1 48 watt, 2 amp power supply ELC-PS2 Capacity ELC-PS1 24 W ELC-PS2 48 W Input Nominal voltage 2 Vac 2 Vac Voltage range Vac Vac Frequency 47 3 Hz 47 3 Hz Output Nominal output voltage 24 Vdc ± 3% 24 Vdc ± 3% Nominal current 1 A 2 A Efficiency 78% to 87% typical at full load 78% to 87% typical at full load Residual ripple/peak switching < mv typical at full load < 2 mv typical at full load ( MHz) General/Physical Data Housing material Plastic Plastic Dimensions (D) mm mm Dimensions (W) 3.5 mm 55 mm Dimensions (H) 9 mm 9 mm Weight (g) Operating temperature C to +55 C C to +55 C Storage temperature 25 C to +7 C 25 C to +7 C Operating humidity % to 95% RH, noncondensing % to 95% RH, noncondensing Pollution degree 2 2 Approvals/Certifications Safety and Protection Overload/short circuit protection UL 8, CE, RoHS, EMC directive 89/33/EEC, low voltage directive 73/23/EEC Auto recovery UL 8, CE, RoHS, EMC directive 89/33/EEC, low voltage directive 73/23/EEC Auto recovery Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-37

39 .1 Power Supplies Dimensions Approximate Dimensions in Inches (mm) ELC-PS1 Power Supply L 3.54 (9.) N 24V V POWER ELC-PS1.12 (3.) 1.44 (3.5) 13.3 (.52) 2.3 (.) ELC-PS2 Power Supply.12 (3.) 2.17 (55.) 13.3 (.52) 2.3 (.) 3.94 (.) 3.54 (9.) L N 24V V POWER ELC-PS2.12 (3.) 1.28 (32.5) V7-T-38 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

40 Power Supplies.1 easyrelay Power Supply Contents Description PSL Series PSC Series PSG Series ELC Series easyrelay Power Supply Product Selection Technical Data and Specifications Dimensions Sensor Power Supply Page V7-T-4 V7-T- V7-T-1 V7-T-3 V7-T- V7-T-41 V7-T-42 V7-T-43 easyrelay Power Supply Product Description Eaton s easyrelay power supplies are the perfect products for those applications requiring a low amperage 24 Vdc power source. While these products were developed to be a perfect match for our easyrelay products, they can be used in a variety of applications. Features, Benefits and Functions Universal input voltage: Vac, / Hz Wide operating temperature range ( 25 C to +55 C) Power ON / diagnostics LED: continuous light on fault-free operation; flashing LED short circuit overload on voltage output Optional mounting hardware for panel mounting (EZB4-1-GF1) or standard DIN rail mounting Finger-safe, side-entry screw clamp terminals for clean wiring Primary switched-mode power supplies Output voltages can be connected in parallel to increase power output or for redundant operation to achieve greater system availability Safety extra low voltage (SELV to EN 55 22) Radio interference Class B to EN and EN for use in industrial and public networks Standards and Certifications UL listed CSA certified CE marked RoHS compliant CSA Class I, Division 2 rated for groups A, B, C, D Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-39

41 .1 Power Supplies Product Selection EASY-POW EASY-POW EASY-POW EASY-POW easyrelay Power Supply Units Rated input voltage 2 Vac, single-phase. Input Voltage Range Rated Output Voltage Output Voltage Setting Range Rated Output Power Rated Output Current Catalog Number 2 Vac 24 Vdc/12 Vdc 8 W.35 A / ma EASY-POW 2 Vac 24 Vdc 3 W 1.25 A EASY-POW 2 Vac 24 Vdc W 2.5 A EASY-POW 2 Vac 24 Vdc W 4.2 A EASY-POW V7-T- Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

42 Power Supplies.1 Technical Data and Specifications easyrelay Series Capacity EASY-POW 8 W EASY-POW 3 W EASY-POW W EASY-POW W Input Nominal voltage 2 Vac 2 Vac 2 Vac 2 Vac Voltage range Vac Vac Vac Vac Frequency 47 3 Hz 47 3 Hz 47 3 Hz 47 3 Hz Output 24 Vdc Nominal output voltage 24 Vdc ± 3% 24 Vdc ± 3% 24 Vdc ± 3% 24 Vdc ± 3% Nominal current.35 A 1.25 A 2.5 A 4.2 A 12 Vdc Nominal output voltage 12 Vdc Nominal current ma General/Physical Data Housing material Plastic Plastic Plastic Plastic Dimensions (D) 2.22 in (5.5 mm) 2.22 in (5.5 mm) 2.22 in (5.5 mm) 2.22 in (5.5 mm) Dimensions (W) 1. in (35.5 mm) 2.81 in (71.5 mm) 2.81 in (71.5 mm) 4.23 in (7.5 mm) Dimensions (H) 3.54 in (9 mm) 3.54 in (9 mm) 3.54 in (9 mm) 3.54 in (9 mm) Operating temperature 25 C to +55 C 25 C to +55 C 25 C to +55 C 25 C to +55 C Storage temperature C to +7 C C to +7 C C to +7 C C to +7 C Pollution degree Connection cables Solid.2 4. mm 2 (AWG 22 12).2 4. mm 2 (AWG 22 12).2 4. mm 2 (AWG 22 12).2 4. mm 2 (AWG 22 12) Flexible mm 2 (AWG 22 12) mm 2 (AWG 22 12) mm 2 (AWG 22 12) mm 2 (AWG 22 12) Approvals/Certifications UL, CE, RoHS, CSA, EN 178m IEC/EN 947 UL, CE, RoHS, CSA, EN 178m IEC/EN 947 UL, CE, RoHS, CSA, EN 178m IEC/EN 947 Safety and Protection Overload/short circuit protection Yes Yes Yes Yes Overcurrent limitation form.3 A 1.4 A 2.8 A 4. A Degree of protection IP IP IP IP RFI suppression EN 511, EN 522 Class B, IEC --1, 2, 3, 4 EN 511, EN 522 Class B, IEC --1, 2, 3, 4 EN 511, EN 522 Class B, IEC --1, 2, 3, 4 UL, CE, RoHS, CSA, EN 178m IEC/EN 947 EN 511, EN 522 Class B, IEC --1, 2, 3, 4 Potential isolation (prim./sec.) Yes, SELV, (to EN 9, VDE 85) Yes, SELV, (to EN 9, VDE 85) Yes, SELV, (to EN 9, VDE 85) Yes, SELV, (to EN 9, VDE 85) Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-41

43 .1 Power Supplies Dimensions Approximate Dimensions in Inches (mm) EASY-PO W, EASY-POW and EASY-POW Series EASY-POW EASY-POW EASY-POW.3 (7.5).42 (.8) 1.97 (.) 1.77 (45.) 3.54 (9.) 4.2 (2.) 3.54 (9.) 4.2 (2.) 4.33 (1.) 4.33 (1.).18 (4.5) 1.87 (47.5) 2.22 (5.5) (M4).157 (3.9) DIA. 1. (35.5).3 (7.5) 1.41 (35.8) 2.81 (71.5) (M4).157 (3.9) DIA. EASY-POW Series.4 (1.25) 2.9 (75.) M4 #8.4 (1.25) 1.77 (45.) 4.2 (2.) 3.54 (9.) 4.33 (1.).18 (4.5) 1.87 (47.5) 2.22 (5.5) 4.23 (7.5) V7-T-42 Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18

44 Power Supplies.1 Sensor Power Supply Contents Description PSL Series PSC Series PSG Series ELC Series easyrelay Power Supply Sensor Power Supply Product Selection Technical Data and Specifications Wiring Diagram Dimensions Page V7-T-4 V7-T- V7-T-1 V7-T-3 V7-T-39 V7-T-44 V7-T-44 V7-T-45 V7-T-45 Sensor Power Supply Product Description Eaton s sensor power supply was specially designed to be used with the Series and E8 Series zero pressure accumulation systems, but is also suitable for use in a wide variety of applications. The unit delivers W output at 27 Vdc and supports easy, Class II wiring. The power supply is a tamper-proof, rugged component easily mounted to a conveyor sidechannel or support. Internal components are fully encapsulated in a strong diecast housing to stand up to rugged handling, ensuring flawless performance in any material handling environment. Features, Benefits and Functions Integrated AC junction box for one-step mounting and wiring without the need for additional accessories Built-in DC power health contact allows easy monitoring of power supply status Unitized design features a tamper-proof encapsulated construction to reduce the risk of damage associated with conventional open control-panel type construction Built-in slug-release input converts an AC or DC input to the appropriate DC signal for integration with the Series and E8 Series zero pressure accumulation systems Dual output connection terminals to make it easy and convenient to locate the power supply at the center of the cable run Power switch protected against accidental operation Power in and out indicators show status at a glance Conduit entry box for NEC compliance Simple mounting with two 1/4-inch bolts Rugged die-cast housing Fully encapsulated electronics Standards and Certifications UL listed CSA approved Volume 7 Logic Control, Operator Interface and Connectivity Solutions CA88E October 18 V7-T-43