1-Conductor Female Connector with Levers Pin Spacing: mm MCS MAXI 16
|
|
|
- Cody Hall
- 5 years ago
- Views:
Transcription
1 -Conductor Female Connector with evers Pin Spacing: 0.6 mm MCS MAXI 6 Intuitive and tool-free lever actuation Universal connection for all conductor types Push-in termination of solid or ferruled conductors Test slot 0 and 90 to conductor entry 00% protected against mismating Coding via coding fingers Electrical Data Ratings per* IEC/EN Nominal voltage (III / V Rated surge voltage (III / 3 Rated voltage (III / V Rated surge voltage (III / 2 Nominal voltage (II / V Rated surge voltage (II / 2 Rated current 76 A Connection Data Connection technology Strip length Conductor range Solid conductor Fine-stranded conductor Fine-stranded conductor with insulated ferrule Fine-stranded conductor with uninsulated ferrule Fine-stranded conductor, with twin ferrule Push-in CAGE CAMP 8 20 mm / inch mm² / 8 4 AWG mm² / 8 4 AWG mm² mm² mm² Material Data Material group I Insulating material Polybutylene terephthalate (PBT Flammability class per U94 V0 imit temperature range C Clamping spring material Chrome nickel spring steel (CrNi Contact material Electrolytic copper (E Cu Contact plating Silver-plated Additional springs for socket contact Chrome nickel spring steel (CrNi The MUTI CONNECTION SYSTEM (MCS is designed without breaking capacity for compliance with DIN EN When used as intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated. *(III / 2 Overvoltage category III / Pollution degree 2 Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit
2 -Conductor Female Connector with evers Pin Spacing: 0.6 mm MCS MAXI 6 Dimensions (in mm: Dimensions (in mm: 49,8 27,7 49,8 27,7 T 30,7 45,7 29, 45,2 4,5 _ 2 5,7 _ ( ( T 30,7 45,7 29, 45,2 _6 6 _ = pole no. x pin spacing +.3 mm = pole no. x pin spacing +.3 mm -conductor female connector with levers; light gray; 0.6 mm (0.4 inch pin spacing -conductor female connector with levers and locking lever; light gray; 0.6 mm (0.4 inch pin spacing Pole No. Item No. Pole No. Item No / / / / / Available upon request (depending on quantity required: Other pole numbers
3 THT Male Header Pin Spacing: 0.6 mm MCS MAXI 6 Male header may be mounted horizontally or vertically via straight or angled solder pins Three solder pins per pole provide high electrical and mechanical stability Mating face (IP2XB with higher protection against accidental contact 00% protected against mismating Coding via coding fingers Electrical Data Ratings per* IEC/EN Nominal voltage (III / V Rated surge voltage (III / 3 Rated voltage (III / V Rated surge voltage (III / 2 Nominal voltage (II / V Rated surge voltage (II / 2 Rated current 76 A Solder Pin Data Solder pin length Solder pin dimensions Drilled hole diameter 4 mm.2 x.2 mm mm Material Data Material group I Insulating material Polybutylene terephthalate (PBT Flammability class per U94 V0 imit temperature range C Clamping spring material Chrome nickel spring steel (CrNi Contact material Electrolytic copper (E Cu Contact plating Silver-plated The MUTI CONNECTION SYSTEM (MCS is designed without breaking capacity for compliance with DIN EN When used as intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated. *(III / 2 Overvoltage category III / Pollution degree 2 Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit
4 THT Male Header Pin Spacing: 0.6 mm MCS MAXI 6 Dimensions (in mm: Dimensions (in mm: Dimensions (in mm: 6,5 5,7,2 T ,08 3,7 0,6 4 6,5 5, T,2 4 2,24 5,08 0,6 6,5 5,7 T, ,08 2,24 4 0, _ = pole no. x pin spacing +.3 mm = pole no. x pin spacing +.3 mm = pole no. x pin spacing +.3 mm 0,6 5,08 3,7 2 n 5,7 T Ø,7 +0, 0,6 5,08 3,7 2 n Ø,7 +0, 0,6 5,08 3,7 2 n Ø,7 +0, 5,7 T _ 5,7 T _ THT male header; with straight solder pins; 3 solder pins/pole; light gray; 0.6 mm (0.4 inch pin spacing THT male header; with upward-angled solder pins; 3 solder pins/pole; light gray; 0.6 mm (0.4 inch pin spacing Pole No. Item No. Pole No. Item No. Pole No. Item No THT male header; with downward-angled solder pins; 3 solder pins/pole; light gray; 0.6 mm (0.4 inch pin spacing Available upon request (depending on quantity required: Other pole numbers Protection against PCB mounting errors
5 -Conductor Male Connector with evers Pin Spacing: 0.6 mm MCS MAXI 6 Universal connection for all conductor types Push-in termination of solid or ferruled conductors Test slot 0 and 90 to conductor entry Intuitive and tool-free operation 00% protected against mismating Coding via coding fingers Electrical Data Ratings per* IEC/EN Nominal voltage (III / V Rated surge voltage (III / 3 Rated voltage (III / V Rated surge voltage (III / 2 Nominal voltage (II / V Rated surge voltage (II / 2 Rated current 76 A 7 Connection Data Connection technology Strip length Conductor range Solid conductor Fine-stranded conductor Fine-stranded conductor with insulated ferrule Fine-stranded conductor with uninsulated ferrule Fine-stranded conductor, with twin ferrule Push-in CAGE CAMP 8 20 mm / inch mm² / 8 4 AWG mm² / 8 4 AWG mm² mm² mm² Material Data Material group I Insulating material Polybutylene terephthalate (PBT Flammability class per U94 V0 imit temperature range C Clamping spring material Chrome nickel spring steel (CrNi Contact material Electrolytic copper (E Cu Contact plating Silver-plated The MUTI CONNECTION SYSTEM (MCS is designed without breaking capacity for compliance with DIN EN When used as intended, these connectors must not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated. *(III / 2 Overvoltage category III / Pollution degree 2 Additional technical information, see Volume 2, Section 3 Approvals and corresponding ratings, visit
6 -Conductor Male Connector with evers Pin Spacing: 0.6 mm MCS MAXI 6 Dimensions (in mm: 50,6 27,7 45,2 29, 46,5 6,5 5,7 ( T _ ( = pole no. x pin spacing +.3 mm -conductor male connector with levers; light gray; 0.6 mm (0.4 inch pin spacing Pole No. Item No Available upon request (depending on quantity required: Other pole numbers
Technical data: Pin Spacing
282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,
Item No.: /
mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter
Electrical Interconnection
Electrical Interconnection Edition 208/ Rail-Mount Terminal Block Systems Full Line Catalog, Volume Edition 207/208 PCB Terminal Blocks and Connectors Full Line Catalog, Volume 2 Edition 207/208 2 Automation
Male connector; 6-pole; pin spacing 3.5 mm / in; 100% protected against mismating
Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Item Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Marking Business data Supplier
Item No.: /
Angled female connector; with snap-in mounting foot; 3-pole; pin spacing 5 mm / 097 in; 00% protected against mismating; for panel mounting; Plate thickness 06x2 mm; Fixing holes 35 mm Ø Item Angled female
Modular PCB terminal block; 2 solder pins/pole; 1-pole; pin spacing 5/5.08 mm / 0.2 in; with push-button
push-button - Item No: 255-40 Modular PCB terminal block; 2 solder pins/pole; -pole; pin spacing 5/508 mm / 02 in; with push-button Item No: 255-40 Modular PCB terminal block; 2 solder pins/pole; -pole;
Male connector; with fixing flanges; 6-pole; pin spacing 5.08 mm / 0.2 in; for screw or similar mounting types; for parallel or perpendicular mounting
Male connector; with fixing flanges; 6-pole; pin spacing 508 mm / 02 in; for screw or similar mounting types; for parallel or perpendicular mounting Item No: 231-636/019-000 Male connector; with fixing
Female connector; 2-pole; pin spacing 5 mm / in; codable; only 1 locking latch; with coding finger; with latch
Female connector; 2-pole; pin spacing 5 mm / 097 in; codable; only locking latch; with coding finger; with latch Item No: 23-02/026-000 Female connector; 2-pole; pin spacing 5 mm / 097 in; codable; only
Male header, 100% protected against mismating, (1 x 1) mm straight solder pins Pin spacing 3.5 mm 3.81 mm. light gray <_ 8,5_> 3,5 1x1 <_ 9,3_>
96 Male Headers with Solder Pins; Double-Deck Male Headers with Solder Pins, Pin Spacing 3.5 mm and 3.81 mm 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5
Electrical Interconnections. Supplementary Catalog to Full Line Catalogs, Volumes 1/2/5 Edition 2012/2 1/2/5
Electrical Interconnections Supplementary Catalog to Full Line Catalogs, Volumes /2/ Edition 202/2 /2/ The new items in this catalog supplement products found in the following main catalogs /2/ Volume
Through-Board SMD PCB Terminal Block; 0.75 mm² Pin Spacing: 6.5 mm 2070 Series
Volume, Section SMD PCB Terminal Blocks Through-Board SMD PCB Terminal Block; 0.75 mm² 070 Series SMD PCB terminal blocks with Push-in CAGE CLAMP connection for back-side wiring of LED modules Low profile
Connector System for Fluorescent Lighting Fixtures. Connectors for In-Line Mounting of Fluorescent Lighting Fixtures. Fully Polarized Connectors
Connector System for Fluorescent Lighting Fixtures Connectors for In-Line Mounting of Fluorescent Lighting Fixtures Fully Polarized Connectors Luminaire Disconnect Connectors Pluggable Lighting Connectors
MULTI CONNECTION SYSTEM Product Overview
MULTI CONNECTION SYSTEM Product Overview MCS MULTI CONNECTION SYSTEM Product Overview Sorted by Pin Spacing 2.5 mm MICRO* mm, 3.81 mm MINI 100% Mismating Protection mm MINI HD* mm MINI SL screw 714 Series
Item No.: /
Female connector; with angled solder pins; 4-pole; with locking levers; pin spacing 508 mm / 02 in; solder pin 06x mm; codable; Horizontal PCB mounting Item No: 232-264/039-000 Female connector; with angled
SMD Terminal Blocks Small is Big
SMD Terminal Blocks Small is Big SMD Terminal Blocks A compact and flat printed circuit board connection is required to achieve the most uniform light distribution, while minimizing shadowing. WAGO s SMD
Data sheet... OMNIMATE Power - series BL/SL 7.62HP BLZ 7.62HP/04/180LR SN BK BX
Power on board #96 100% safety, 100% integration, 100% cost-effectiveness: The compact and efficient solution for UL-600V applications in the lower performance range (up to 12 kva). 29 A at 400V (IEC)
TOPJOB S Sensor/Actuator Terminal Blocks Pluggable Signal Level with Push-in CAGE CLAMP Reliability
TOPJOB S Sensor/Actuator Terminal Blocks Pluggable Signal Level with Push-in CAGE CLAMP Reliability TOPJOB S SEND THE RIGHT SIGNALS For the very first time, sensor/actuator wiring is pluggable between
SMD PCB TERMINAL BLOCKS We Connect Your Lights
SMD PCB TERMINAL BLOCKS We Connect Your Lights SMD PCB TERMINAL BLOCKS A compact and low-profile PCB connection is required for optimal uniform light distribution, while minimizing shadowing. WAGO s SMD
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
Surface Mount Terminal Blocks with Push-Buttons
Surface Mount Terminal Blocks with Push-Buttons Surface Mount Terminal Blocks with Push-Buttons Pin Spacing 4 mm, 8 mm 2060 Series Surface mount terminal blocks with CAGE CLAMP S connection and push-buttons
SMD PCB Terminal Blocks We Connect Your Light
SMD PCB Terminal Blocks We Connect Your Light SMD PCB TERMINAL BLOCKS A compact and low-profile PCB connection is required for optimal uniform light distribution, that minimizes shadowing. WAGO s SMD PCB
SMD PCB TERMINAL BLOCKS We Connect Your Lights
SMD PCB TERMINAL BLOCKS We Connect Your Lights SMD PCB TERMINAL BLOCKS A compact and low-profile PCB connection is required for optimal uniform light distribution, while minimizing shadowing. WAGO s SMD
07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
Modular Terminal Blocks and Terminal Strips with CAGE CLAMP, Series 260 to 262, Side-Entry
36 Modular Terminal Blocks and Terminal Strips with CAGE CLAMP, Series 260 to 262, Side-Entry Assembly Assembly of modular terminal blocks to terminal strips Mounting of an end plate screw fixing CAGE
TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability
TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TOPJOB S SEND THE RIGHT SIGNALS. TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TWO IN ONE. WITH
Industrial Ethernet Panel-Mount Adaptors for PROFINET or EtherNet/IP Applications
Industrial Ethernet Panel-Mount Adaptors for PROFINET or EtherNet/IP Applications Type 0981 ENC 100 RJ45/M12 adaptor, female receptacle connector M12, D coding, chassis side thread PG 9, RJ45 female connector,
WINSTA. Full Line Catalog 2008/2009
WINSTA Full Line Catalog 2008/2009 5 Contents FULL LINE CATALOG W4, Volume 1 Rail-Mounted Terminal Block Systems FULL LINE CATALOG W4 Rail-Mounted Terminal Blocks Volume 1 X-COM -SYSTEM Terminal Strips
ME PLC Multifunctional housing for complex electronics. Data sheet _en_01. 1 Description
Multifunctional housing for complex electronics Data sheet 105504_en_01 PHOENIX CONTACT 2013-04-08 1 Description The housings of the ME PLC 40... product group consist of a 40-mm wide housing base with
Han PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module
Han termination Contents Page Han-Fast Lock... 20.11 adapter for Han DD... 20.13 adapter for Han DDD module... 20.16 adapter for Han 40 A Axial module... 20.18 adapter for Han E... 20.20 adapter for Han
Powermate Range pitch 10.16
Contents owermate Range pitch.16 owermate Range pitch.16 owermate Range pitch.16 Male connectors with solder connection.2 Socket connectors with clamping yoke connection.8.1 owermate Range pitch.16 SU.16/9
- 1 - General ordering data Order No
General ordering data Order No. 1727690000 Part designation B2L 3.5/16 SN SW Version EAN 4032248037889 Qty. 50 pc(s). PCB plug-in connector, Female connectors, Tension clamp connection, Clamping range,
- 1 - Product catalogue PCB connection systems PCB terminals Clamping yoke connection LM 5.00 / 5.08 LM 5.00/135
General ordering data Order No. 1715360000 Part designation LM5.00/3/135 OR Version EAN 4008190365240 Qty. 500 pc(s). PCB terminal, Clamping yoke connection, Soldered connection, Clamping range, max.:
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
- 1 - General ordering data Order No
General ordering data Order No. 1627280000 Part designation SLS 5.08/6B SN OR Version EAN 4008190199791 Qty. 50 pc(s). PCB plug-in connector, Male connectors, Clamping yoke connection, Clamping range,
- 1 - General ordering data Order No
General ordering data Order No. 1730710000 Part designation BL 5.00/3 SN SW Version EAN 4008190387327 Qty. 100 pc(s). System parameters Conductor connection system Leaf spring connection Outgoing direction
for a perfect electrical installation. The range of rail-mounted terminal blocks
The range of rail-mounted terminal blocks for a perfect electrical installation. The range of rail-mounted terminal blocks for a perfect electrical installation. The new standard for rail-mounted terminal
Han-Brid. Contents Han-Brid Features Han-Brid Data interfaces Han-Brid Overview Han-Brid Cu
Contents Page Features... 19.02 Data interfaces... 19.03 Overview... 19.04 Cu... 19.06 F.O.... 19.08 Quintax 3 A... 19.10 RJ45 C... 19.12 USB / FireWire... 19.14 Han 4 A SC... 19.16 Hoods/Housings... 19.18
Data sheet. OMNIMATE Signal - series B2L/S2L row S2L-SMT 3.50/08/180G 3.5SN BK BX
OMNIMATE Signal - series /S2L 3.50-2-row High-temperature-resistant, straight, 2-tier male connector for all common soldering methods. Optimised for automatic assembly. Packed in box or tape. 3.2 mm solder
09. DIN CONNECTORS
. 41 612 CONNECTORS Connectors that comply with 41 612 have been in use for years for both board-to-board applications and cable-to-board applications. Their robustness and universality are legendary.
CompactPCI PowerConnector
CompactPCI PowerConnector Table of Contents 1 Introduction............................................................. 2 Product Features......................................................... 3 Performance
Double-deck terminal block; Through/through terminal block; L/L; gray housing
0 Double-deck terminal block; Through/through terminal block; L/L; gray housing Item No: 870-0 Double-deck terminal block; Through/through terminal block; L/L; gray housing Marking Business data Supplier
VMEbus systems System description Technical characteristics System description
Directory chapter 06 / inverse Page VMEbus systems................................................ 06.02 System description.............................................. 06.03 Technical characteristics..........................................
M12 Field Wireable Connectors. M12 CAT.6A Field Wireable Connectors. M12 Field Wireable Connectors for PROFINET
M12 Connectors Application Advantage Shielded design ETHERLINE Ethernet Cable, Connectors & Tools M12 Field Wireable Connectors Male Female Temperature Range: Max. 85 C Nominal Voltage: Nominal Current:
09. DIN Connectors
. Connectors Connectors that comply with have been in use for years for both board-to-board applications and cable-to-board applications. Their robustness and universality are legendary. The classic signal
Applications
Han PCB adapter Contents Page Technical characteristics PCB adapter for Han DD... 20.02 Han DD Inserts with PCB adapter... 20.03 Technical characteristics PCB adapter for Han E... 20.04 Han E Inserts with
D-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
Transparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling
Transparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling 572 Assembly Application Snapping a cover carrier onto the carrier rail. Application examples: cover
SBE 80 / SBO 60 Connectors - up to 80 Amps
Connectors - up to 80 Amps SBE and SBO connectors build on the capability of the two pole SB connectors by offering up to 8 auxiliary power / signal contacts along with an IEC 60950 touch safe housing.
400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated IP69K, Tested in accordance with DIN 40050/Part 9 IP6k9k USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof
IP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
revos revos Industrial Multipole Connectors
revos revos Industrial Multipole Connectors Catalog 2018 revos MINI Plant II, Rodezstraße in Bamberg Company headquarters in Bamberg STOCKO main plant in Wuppertal Solutions for Building technology AT
Mini feed-through terminal block - MSDBV 2,5-M
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
APPLICATION NOTES. Connectors for LED Lighting Applications. Co-Planar Board Mating FIG. 1
APPLICATION NOTES Connectors for LED Lighting Applications Mill-Max addresses the connector needs of the growing field of LED lighting applications with products such as receptacles and sockets suitable
Directory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch
F Directory chapter 05 D-Sub Filter subminiature D connectors, 2.54 mm pitch New Page General information.............................................. 05.02 Technical characteristics..........................................
02. PushPull CONNECTORS
. CONNECTORS A distributed automation system does not contain any central automated control cabinets. Controls, sensors and actuators are designed for a high degree of protection (IP 65 / IP 67) and are
Extract from new. Device Connectivity catalogue. HARTING har-flex. People Power Partnership
Extract from new Device Connectivity catalogue HARTING har-flex People Power Partnership . har-flex CONNECTORS The continuous scalability by an even number of contacts, i.e. from 6 to 100, of the HARTING
Electrical Connection Technology. New Items: Autumn 2007
Electrical Connection Technology New s: Autumn 2007 Contents Rail-Mounted Terminal Block Systems Volume 1 02 57 PCB Terminal Blocks and Connectors Volume 2 58 91 WINSTA WINSTA 93 97 Index of Nos. 98 102
High-density multi-pin connectors
High-density multi-pin connectors Mating and mounting conditions to DIN 41612/IEC 60603-2 General With the ever increasing miniaturization and higher packaging densities in highly integrated circuits there
Miniature Push-Pull Series Atto Miniature Push-Pull
J Miniature Push-Pull Series Atto Miniature Push-Pull Technical Data Panel connector Cable connector Coupler connector Panel connector, cable connector and coupler connector circular housing Locking Push-Pull,
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM. US Patent # 6,299,492 B1 2. POWER, RIGHT ANGLE EARLY 3. POWER, RIGHT ANGLE EARLY
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM US Patent # 6,299,492 B1 The HOTMATE board to board interconnection system provides a unique method of transferring hot pluggable power requirements within
Right angle press-fit D-Sub connectors
Right angle press-fit D-Sub connectors Version in Standard and in Eurostyle General The new generation of right angle D-Sub connectors with press-fit termination of the TMC series are according to DIN
TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability
TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TOPJOB S SEND THE RIGHT SIGNALS TOPJOB S Sensor/Actuator Terminal Blocks with Push-in CAGE CLAMP Reliability TWO IN ONE. WITH
ODU MAC LC. Modular Attachable Connector System
Catalogue No. 1004 LC-a ODU MAC LC Modular Attachable Connector System ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr. 11, 84453 Mühldorf a. Inn, Germany Phone: +49/ 86 31/61 56-0, Fax: +49/ 86 31/61
JL05 SERIES CONNECTORS
The J0 Series connectors conforms to JISB0 specifications. J0 is a circular, waterproof connector using IPF structure. There is a one-touch locking mechanism for ease in mating and unmating. With first-to-make/last-to-break
02. PushPull CONNECTORS
. CONNECTORS A distributed automation system does not contain any central automated control cabinets. Controls, sensors and actuators are designed for a high degree of protection (IP 65 / IP 67) and are
UK 5-MTK-P/P. Extract from the online catalog. Order No.:
Extract from the online catalog UK 5-MTK-P/P Order No.: 3004032 Disconnect and test disconnect terminal block, Connection type: Screw connection, Cross section: 0.2 mm² - 6 mm², AWG: 24-10, Nominal current:
Connector System for Circular Contacts
Connector System for Circular Contacts Introduction The diameter 1.5 mm and diameter 2.5 mm Connector System is designed for electronic and electrical applications in motor vehicles. It fullfils all requirements
Details of the Han-Terminal block connector Han D AV Han D AV Distributor Han E AV Han ES AV
Contents -Terminal Block Connectors Page Details of the -Terminal block connector........................ 08.02 D................................................... 08.10 D Distributor...........................................
M12 connector D-coding M12 connector X-coding RJ45 IP20 connector PushPull RJ45 IP65 / IP67 connector
M12 connectors Directory Chapter Page General information....02 M12 connector D-coding....06 M12 connector X-coding....20 RJ45 IP20 connector....27 PushPull RJ45 IP65 / IP67 connector....46 Han 3 A RJ45
V.35 - Interface connectors
V.35 DTE/DCE Interface connectors Description The Telecommunications Standardization Sector TSS V.35, formerly CCITT V.35 is the international standard termed Data Transmission at 48 Kbps using 60-108
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
CRIMPFLEX connectors for flexible circuits
CRIMPFLEX connectors for flexible circuits CRIMPFLEX CONNECTORS Technical data...3 CRIMPFLEX CRIMPING Description...4 MALE SOLDER TABS Solder tabs environment...5 Standard short male solder tab...6 Standard
UK 2,5 N. Extract from the CD catalog. Order number:
Extract from the CD catalog UK 2,5 N Order number: 3003347 > https://eshop.phoenixcontact.com/phoenix/treeviewclick.do?uid=3003347 Feed-through modular terminal block, Type of connection: Screw connection,
Compact Fluorescent Lampholders
Table of Contents GR14q 26.738 [03] 14, 15 GZ16q 26.739 [03] 16 G23 26.719 [03] 17-19 26.721 [03] 17, 18 GX23 / GX23-2 26.720 [03] 20, 21 Supports for TC-S lamps 26.719 [03] 22-24 G24 / GX24 26.745 [03]
EPIC Circular Connectors CIRCON M23 Series
The M3 connectors have many inherent features which offer application advantages and provide significant benefits for the customer. These features make it one of the most application friendly connectors
Catalog C-035 Rev. C
Catalog C-035 Rev. C P O S I T R O N I C I N D U S T R I E S Today, some customer applications have requirements for high bandwidth transfer between VMEbus cards. Requirements which even the most updated
Extract from the online catalog
Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The
ODU MINI-SNAP PC Product Description. ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic
ODU MINI-SNAP PC Product Description ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic Cylindrical Connectors are generally available with several locking mechanisms: The most frequently
Han R 23. Circular Connector. Certified acc. to DIN EN ISO 9001 in design/ development, production, installation and servicing.
Circular Connector Certified acc to DIN EN ISO 9001 in design/ development, production, installation and servicing Data Sheet 0039-4 Circular Connectors Features Size R 23 Outer diameter 26 mm High contact
Installer Connectors Overview Suitable for lighting, power, HVAC & other applications
Installer Connectors Overview Suitable for lighting, power, HVAC & other applications 221 Series Compact Lever Connectors 221 Series - 4mm² 0.2-4mm 2 solid & stranded 0.14-4mm 2 fine-stranded 450 V/4 kv/2
series Subminiature snap-action switches
Rocker switches Product features Small, efficient snap-action switches up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator
Top Load Socket: BTB
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
RECTANGULAR POWER CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved TE CONNECTIVITY (TE) 08P MTA156 CONN ASSY 3-643818-8 TE Internal Number: 3-643818-8 Product Type
XC5. DIN-style Twin-contact Connectors. Expanding the DIN Concept. Materials and Finish. Ratings and Characteristics
DIN-style Twin-contact Connectors Expanding the DIN Concept Mates with DIN connectors. Ideal for automated soldering because the Connectors sit on top of the board. Mounting dimensions of the DIN Style-1
Modular Connectors 75
75 Plug/Jack Compliant to Enhanced Category 5 standards Connector type Size Series Name Page plug connectors compliant to enhanced category 5 standards 8 TM21P 77 jack connectors for high-speed LAN transmission
v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc.
v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc. JAE JL10 Series Circular Waterproof Connector Application Examples Industrial machineries Servo
HARTING. Interface Connectors. People Power Partnership
11 5 HARTING Interface Connectors People Power Partnership Directory chapter 00 Modular metric high speed connectors, 2.0 mm pitch Page connector system general information......................... 00.04
FLEX Ex Spring Clamp Terminal Base
Installation Instructions FLEX Ex Spring Clamp Terminal Base (Cat. No. 1797-TB3S) 1 10 11 4 Only remove this cover plug if connecting another terminal base unit. 3 5 6 12 2 7 8 9 41253 Component Identification
Extract from the online catalog
Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http://www.download.phoenixcontact.com. The
Product Details. Contents. Features and Mounting Options for SUNNY STRING-MONITOR SSM24-11
Technical Information Product Details Features and Mounting Options for SUNNY STRING-MONITOR SSM24-11 Contents The Sunny String Monitor SSM24 11 is specifically designed for monitoring large PV generators.
The max. load current must not be exceeded by the total current of all connected conductors.
Extract from the online catalog PT 2,5-3PV Order No.: 3210512 Multi-level terminal block, Connection method: Push-in connection, Cross section: - 4 mm², AWG 26-12, Width: 5.2 mm, Color: gray, Mounting
UDK 4-DUR. Extract from the online catalog. Order No.:
Extract from the online catalog UDK 4-DUR Order No.: 2775207 The illustration shows version UDK 4-DUR 249 Feed-through modular terminal block, Connection type: Screw connection, Cross section: 0.2 mm²
New Product Highlights. Issue 1/2014
New Product Highlights Issue 1/2014 Small and Very Clever 221 Series COMPACT Splicing Connectors for All Wire Types Item No. 221-413 Item No. 221-415 Item No. 221-412 Technical data: 0.14 4 mm 2 (AWG 24
New Product Highlights. Issue 1/2014
New Product Highlights Issue 1/2014 WAGO-I/O-SYSTEM 750 XTR Taking it to the extreme The standard for 750 XTR The WAGO-I/O-SYSTEM 750 XTR is easily recognizable by its dark-gray modules. Benefit from the
Altech s DIN Enclosures by
Altech s DIN Enclosures Since 98 Altech Corporation has grown to become a leading supplier of automation and industrial control components. Headquartered in Flemington, NJ, Altech has an experienced staff
Connectors DIN 41612/IEC
Connectors DIN 41612/IEC 60603-2 and completions General information The DIN 41612/IEC 60603-2 connector family consists of 13 basic sizes and many complementary versions. It was developed for use in 19"
DIK 1,5. Extract from the online catalog. Order No.:
Extract from the online catalog DIK 1,5 Order No.: 2715966 Three-level initiator terminal block, cross section: 0.2-2.5 mm², AWG: 30-14, width: 6.2 mm, color: gray Commercial data EAN 4017918061715 Pack
PT 1,5/ 3-5,0-H. Extract from the online catalog. Order No.:
Extract from the online catalog PT 1,5/ 3-5,0-H Order No.: 1935174 The figure shows a 10-position version of the product PC terminal block, Nominal current: 17.5 A, Nom. voltage: 250 V, Pitch: 5 mm, Number
Data sheet. HDC insert HDC HQ 7 FC
The HQ series - big features in a compact design The electrical values speak for themselves. The standard HE crimp contacts can also be used here. The wire connection level is designed as a crimp contact
UK 5 N BU. Extract from the online catalog. Order No.:
Extract from the online catalog UK 5 N BU Order No.: 3004388 Feed-through modular terminal block, Type of connection: Screw connection, Cross section: 0.2 mm² - 6 mm², AWG 24-10, Width: 6.2 mm, Color: