Toll Free: Tel: Fax:

Transcription

1 Toll Free: Tel: 088 Fax:

2 User Manual " wide LCD IDAW Front aluminum LCD panel IDAWN Front NEMA / IP LCD panel IDDW Stylish front aluminum cover LCD panel IDPW Open frame LCD panel Options : TV tuner

3 Contents Chapter Getting Started. Important Safeguards.... Before Installation.... Unpacking.... Optional Accessories... Chapter IDAW front aluminum LCD panel. Package Contents.... Structure Diagram.... Dimension Diagram.... Mounting Method...7 Chapter IDAWN front NEMA / IP LCD panel. Package Contents...8. Structure Diagram...9. Dimension Diagram...0. Mounting Method... Chapter IDDW stylish front aluminum cover LCD panel. Package Contents.... Structure Diagram.... Dimension Diagram.... Mounting Method... Chapter IDPW open frame LCD panel. Package Contents...7. Structure Diagram...8. Dimension Diagram...9. Mounting Method...0

4 Contents Chapter Chapter 7 Chapter 8 Chapter 9 Connection... Operation 7. Onscreen Display Operation Onscreen Menu... LCD Specifications... TV Tuner Options 9. TV Tuner Options How to Use Remote Controller...7 Chapter 0 Troubleshooting...8 Chapter Dimensions...9 Chapter Cleaning. Cleaning the LCD display...9. Cleaning the Remote Controller...9

5 . Important Safeguards Chapter Please read all of these instructions carefully before you use the device. Save this manual for future reference. What the warranty does not cover Any product, on which the serial number has been defaced, modifi ed or removed. Damage, deterioration or malfunction resulting from: Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product modifi cation, or failure to follow instructions supplied with the product. Repair or attempted repair by anyone not authorized by us. Any damage of the product due to shipment. Removal or installation of the product. Causes external to the product, such as electric power fl uctuation or failure. Use of supplies or parts not meeting our specifi cations. Normal wear and tear. Any other causes which does not relate to a product defect. Removal, installation, and setup service charges. P.

6 . Before Installation Chapter It is very important to locate the LCD Display in a suitable environment. The surface for placing and fi xing the LCD Display should be stable. Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Convenience for connecting the LCD Display to the related facilities should be well considers too.. Unpacking The LCD Display comes with the standard parts shown on the package contents. Check and make sure they are included and in good condition. If anything is missing, or damage, contact the supplier immediately.. Optional Accessories. Power Cord. IEC power cord. NEMA power cord (US). BS power cord (UK). CEE 7/ power cord (German). AS power cord (Australia) P.

7 + POWER DISPLAY MENU CH AUDI O ASPECT SLEEP SELEC T FREEZE ADJUST SOURCE MUTE ENTER BACK + + SWAP AUDI O ZOOM INPUT CLEA R EXI T POSITION ASPECT VOL +. IDAW series Package Contents Chapter User Manual LCD display x pc ' VGA cable (male to male) x pc User manual x pc Power cord x pc SVideo cable x pc RCA cable x pc Remote Controller x pc Mounting bracket A x pcs M*0mm screw x pcs Remarks IDAW Series mounting bracket set includes item 8 9, please refer to p.7 Wall mounting set is already installed on the back of the LCD panel P.

8 . IDAW series Structure Diagram Chapter Front View Rear View Rear case LCD membrane SAMSUNG LCD panel Wallmount bracket mm aluminum front bezel P.

9 . IDAW series Dimension Diagram Chapter Front View UNIT : mm mm = inch Rear View P.

10 . IDAW series Mounting Method Chapter UNIT : mm mm = inch Wall mounting Remarks Wall mounting set is already installed on the back of the LCD panel Mounting bracket A x pcs x pcs Mounting bracket A M*0mm screw P.

11 . IDAW series Mounting Method Chapter 00mm VESA standard UNIT : mm mm = inch Remarks Hardware and M*8pcs for VESA mounting is not provided To avoid damage of internal components, when mounting the VESA bracket, do not use screws that exceed the depth (mm) of the display mounting holes. Using screws that are too long may cause damage to your display P.7

12 + POWER DISPLAY MENU CH AUDI O ASPECT SLEEP SELEC T FREEZE ADJUST SOURCE MUTE ENTER BACK + + SWAP AUDI O ZOOM INPUT CLEA R EXI T POSITION ASPECT VOL +. IDAWN series Package Contents Chapter User Manual LCD display x pc ' VGA cable (male to male) x pc User manual x pc Power cord x pc SVideo cable x pc RCA cable x pc Remote Controller x pc Mounting bracket A x pcs M*0mm screw x pcs Remarks IDAWN Series mounting bracket set includes item 8 9, please refer to p. Wall mounting set is already installed on the back of the LCD panel. P.8

13 . IDAWN series Structure Diagram Chapter Front View Rear View Rear case mm aluminum front bezel SAMSUNG LCD panel LCD membrane mm protective glass (Front Nema / IP protection) Wallmount bracket P.9

14 . IDAWN series Dimension Diagram Chapter Front View UNIT : mm mm = inch Rear View P.0

15 . IDAWN series Mounting Method Chapter UNIT : mm mm = inch Wall mounting Remarks Wall mounting set is already installed on the back of the LCD panel. Mounting bracket A x pcs x pcs Mounting bracket A M*0mm screw P.

16 . IDAWN series Mounting Method Chapter 00mm VESA standard UNIT : mm mm = inch Remarks Hardware and M*8pcs for VESA mounting is not provided To avoid damage of internal components, when mounting the VESA bracket, do not use screws that exceed the depth (mm) of the display mounting holes. Using screws that are too long may cause damage to your display P.

17 + POWER DISPLAY MENU CH AUDI O ASPECT SLEEP SELEC T FREEZE ADJUST SOURCE MUTE ENTER BACK + + SWAP AUDI O ZOOM INPUT CLEA R EXI T POSITION ASPECT VOL +. IDDW series Package Contents Chapter User Manual 7 LCD display x pc ' VGA cable (male to male) x pc User manual x pc Power cord x pc SVideo cable x pc RCA cable x pcs Remote controller x pcs Remarks Wall mounting set is already installed on the back of the LCD panel P.

18 . IDDW series Structure Diagram Chapter Front View Rear View Rear case.mm front aluminum cover SAMSUNG LCD panel LCD membrane Wallmount bracket P.

19 . IDDW series Dimension Diagram Chapter Front View UNIT : mm mm = inch Rear View P.

20 . IDDW series Mounting Method Chapter UNIT : mm mm = inch Wall mounting Remarks Wall mounting set is already installed on the back of the LCD panel 00mm VESA standard Remarks Hardware and M*8pcs for VESA mounting is not provided To avoid damage of internal components, when mounting the VESA bracket, do not use screws that exceed the depth (mm) of the display mounting holes. Using screws that are too long may cause damage to your display P.

21 + POWER DISPLAY MENU CH AUDI O ASPECT SLEEP SELEC T FREEZE ADJUST SOURCE MUTE ENTER BACK + + SWAP AUDI O ZOOM INPUT CLEA R EXI T POSITION ASPECT VOL +. IDPW series Package Contents Chapter User Manual 0 7 LCD display x pc ' VGA cable (male to male) x pc User manual x pc Power cord x pc SVideo cable x pc RCA cable x pcs Remote controller x pcs Remarks Universal open frame mounting set is already installed on the LCD panel P.7

22 . IDPW series Structure Diagram Chapter Front View Rear View Rear case Universal open frame mounting SAMSUNG LCD panel LCD membrane P.8

23 . IDPW series Dimension Diagram Chapter Front View UNIT : mm mm = inch Rear View P.9

24 . IDPW series Mounting Method Chapter UNIT : mm mm = inch 00mm VESA standard Remarks Hardware and M*8pcs for VESA mounting is not provided To avoid damage of internal components, when mounting the VESA bracket, do not use screws that exceed the depth (mm) of the display mounting holes. Using screws that are too long may cause damage to your display Universal open frame mounting Remarks Universal open frame mounting set is already installed on the LCD panel Hardware for fixing the LCD display is not provided P.0

25 . Connection Chapter Audio in with speaker Component Video Connector Power Input Device HDMI VGA RCA SVideo Y Video Pb AudioR Pr AudioL Caution : The LCD Display are hotpluggable, but components of connected devices may not be hotpluggable. Plugging and unplugging cables while connected devices are powered on may cause irreversible damage of the devices and LCD Display. Before attempting to connect anything to the LCD Display, we suggest that turn off power to all devices before connecting them. Apply power to connected devices again only after the LCD Display receiving power.the company is not responsible for damage caused in this way. P.

26 7. Onscreen Display Operation Chapter 7 LCD membrane Power light Green = On Orange = Power saving Power on / off LCD Display the OSD menu Scrolls through menu options and adjusts the displayed control Exit the OSD screen Shortcut key to auto adjustment by pressed the button for seconds or Toggle analog, digital & video connection (DVID and video options only) P.

27 7. Onscreen Menu Chapter 7 OSD Configuration Page Image: To enter into the scheme, brighness, contrast, saturation, hue, sharpness, advanced and reset scheme submenu Display: To enter into the auto auto AR, aspect ratio and PIP submenu EQ: To enter into the band graphic equalizer Clock / Timer: To enter into sleep timer Not Available Setup: To enter into the tuner / channel, inputs, colsed caption, teletext, misc, Aci and VBI service submenu Video Processing Settings: To enter into the noise reduction, video processing and film mode submenu P.

28 8. LCD Specifications Chapter 8 Item Description LCD Manufacturer Diagonal Size " TFT Max. Resolution x 78 Brightness (cd/m²) 0 Color Support.7 Mil. Contrast Ratio (typ.) 00: Viewing Angle (H/V) 78 x 78 Display Area (mm) 7 x Tr Response Time (ms) LCD Panel MTBF (hrs) 0,000 Display Input Signal Connection Power Input Power Consumption Compatibility Analog RGB DB connector Autosensing 00 to 0VAC, 0 / 0Hz Max. 00 Watt, Standby 0 Watt Multiplatform Mix PCs, SUNs, IBMs, HPs & DELLs. Options TV Environmental Operation Storage Relative Humidity Shock Vibration 0 to 0 C Degree to 0 C Degree ~90%, noncondensing 0G acceleration (ms duration) ~00Hz G RMS random vibration P.

29 9. TV Tuner Options Chapter 9 Audio in with speaker Component Video Connector Power Input Device HDMI VGA RCA SVideo TV Y Video Pb AudioR Pr AudioL Remarks Package includes a remote controller P.

30 9. How to Use Remote Controller Chapter 9 POWER MUTE INPUT DISPLAY 0 CLEA R 8 SELEC T BACK 9 MENU EXI T 0 7 ENTER CH VOL 9 0 AUDI O FREEZE + ZOOM ASPECT ADJUST + SOURCE SWAP POSITION 7 SLEEP AUDI O ASPECT P.

31 9. How to Use Remote Controller Chapter POWER 9 DISPLAY SELECT ENTER MENU / / / CH + / FREEZE AUDIO ADJUST ASPECT SOURCE PIP SLEEP MUTE INPUT CLEAR BACK EXIT VOL + / ZOOM + / Switches on or off the TV Only use in TV mode. Select channels. For channel numbers 0 and above, enter the second digit within two seconds. Press this button will show the current input source Select the input source Enter to the select item settings or excude the setting Display the menu on the screen or go to the previous menu Go to the upper menu or select the previous value / Go to the next menu or select the next value / Decrease the setting value / Increase the setting value or enter to the select item setting Increase or decrease the channel number Freeze the main channel display picture Select sound effect: NORMAL, POPULARITY, ROCK, JAZZ, CLAS SICALLY, USER Only used in VGA mode. Adjust the screen position Set the main display aspect ratio mode: FULL SCREEN, PILLAR BOX Only used in PIP mode. Select PIP input source Turn on or off the PIP Channel Select the sleeping time Turn on or off the speaker Select the Main Channel input source Press this button will hide the current input source name on the Top Left position Return to the previous channel watched Exit the menu or cancel Increase or decrease the speaker volume Zoom in or out the screen + / Increase or decrease the brightness 7 SWAP POSITION PIP AUDIO PIP ASPECT Swap the input source with Main Channel and PIP Channel Set the position of the PIP screen: BOTTOMLEFT, BOTTOMRIGHT, TOPLEFT, TOPRIGHT Alternate the main screen speaker or PIP screen speaker Set the PIP display aspect ratio mode: FULL SCREEN, PILLAR BOX P.7

32 0. Troubleshooting Chapter 0. The membrane power light is not ON Press the power On / Off on LCD membrane to check if the monitor is in the ON mode. Check the power cord is properly connected to the LCD display and power outlet.. Power does not turn ON Check whether the power plug is securely inserted into the receptable.. No picture are displayed Check cables for disconnection. Check whether the power for all inout equipment is ON. Check for connection to wrong terminals or for wrong input mode.. Remote controller does not function properly Check for incorrect battery orientation. Check for dead batteries. Check whether you are pointing the remote control transmitter properly at the display s receiver. Check for any obstacle between the remote and the display.. There are spots on the screen Check whether your AV equipment is affected by interference from automobiles, trains, highvoltage transmission lines, neon signs or other potential sources of interference.. Degraded colors/tints Check whether all picture adjustments have been properly made. 7. Improper screen position/size Check whether screen position and size have been properly adjusted. P.8

33 . Dimensions Chapter Model IDAW series IDAWN series IDDW series IDPW series Product Dimension (W x D x H) 77 x 9 x mm 8. x.7 x 7." 77 x 9 x mm 8. x.7 x 7." 9 x x mm 7. x. x." 7 x x mm 8. x. x 7" Net Weight kg lb kg lb kg lb kg lb. Cleaning the LCD display Chapter You may need the following precautions before you begin to clean the LCD display, please read and understand the details below fully.. Make sure the monitor is turned off. Never spray or pour any liquid onto the screen directly. To remove dust and other particles, wipe the screen with a clean, soft, lintfree cloth.. Be cautions of all kinds of cleaning solvents or chemicals, some individuals may be harmful to the LCD display.. If the LCD display is still not clean enough, apply a small amount of nonammonia, nonalcohol based glass cleaner onto a clean, soft, lintfree cloth, and wipe the screen.. Don t use water or oil on the monitor directly.. Cleaning the Remote Controller. Use a soft cloth for cleaning. If it is heavily stained, soak a soft cloth in a mixture of water and detergent and squeeze it dry before wiping off the stains.. Use a soft, dry cloth for final cleaning. The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners. Copyright 008 Synergy Global Technology Inc.All rights reserved. P.9