ODU DOCK and ODU ROB. Connectors for Docking and Robot Systems.

Size: px
Start display at page:

Download "ODU DOCK and ODU ROB. Connectors for Docking and Robot Systems."

Transcription

1 and ODU ROB Connectors for Docking and Robot Systems

2 Robust Circular Connectors and ROB Applications Industrial robots Tool change and depot systems Cable connections for robot systems Test equipment Features Good safeguarding against failure Best guidance features Robust design High quality standards Easy handling during servicing Easy to use High number of mating cycles / long lifetime Flexible insert configuration Best electrical features All shown connectors are according to DIN EN 98:009 connectors without breaking capacity (COC). All dimensions in mm. Most of the pictures are illustrations. All data and specifications subject to change without notice. Issue: 0-0 Page

3 Table of Contents (Part I) Chapter Kapitel From ab Seite Page Produktinformation Product description 7 Haupteinsatzgebiete Main fields of application Vorteile Advantages Gehäusevarianten Housing versions Kontakteinsätze Contact inserts ODU SPRINGTAC Einsätze Inserts with mit quick-change Schnellwechselkopf-Technik head technology Bestellhilfe Order information Größe size 7 Housing Gehäuse Pin Stift- and und socket Buchseneinsätze inserts with mit crimp Crimpanschluss termination Pin Stift- and und socket Buchseneinsätze inserts with mit solder Lötanschluss termination Quick-change Schnellwechselkopf-System head system with mit Crimpanschluss crimp termination Current Strombelastbarkeit carrying capacity für voll for bestückte fully equipped Einsätze inserts size Größe 9 Housing Gehäuse Pin Stift- and und socket Buchseneinsätze inserts with mit crimp Crimpanschluss termination Pin Stift- and und socket Buchseneinsätze inserts with mit solder Lötanschluss termination Quick-change Schnellwechselkopf-System head system with mit Crimpanschluss crimp termination Current Strombelastbarkeit carrying capacity für voll for bestückte fully equipped Einsätze inserts 7 0 Größe Housing Gehäuse Pin Stift- and und socket Buchseneinsätze inserts with mit crimp Crimpanschluss termination Pin Stift- and und socket Buchseneinsätze inserts with mit solder Lötanschluss termination Quick-change Schnellwechselkopf-System head system with mit Crimpanschluss crimp termination Insert Einsatz with mit modularem construction Aufbau Modules aus from dem the ODU-MAC Programm program Current Strombelastbarkeit carrying capacity für voll for bestückte fully equipped Einsätze inserts accessories Zubehör 9 7 Accessories Zubehör 70 assembly instruction and crimp information 7 Assembly Montageanleitung instruction Crimping Crimpwerkzeuge tools and und contact Kontaktverarbeitung preparation Removal Demontagewerkzeuge tools for crimp für contacts Crimpkontakte Product Produktinformation description ODU ROB 79 ODU ROB Order Bestellhilfe information ODU ROB Größe size 8 87 ODU ROB Größe size,, up bis to maximal max. A A Zubehör Accessories Page

4 Table of Contents (Part II) Chapter From Page 8 ODU ROB size 89 ODU ROB size, up to max. 80 A Accessories ODU ROB assembly instruction and crimp information 9 Assembly instruction Assembly possibilities Crimping tools Application specific connectors for 0 Additional docking connectors Application specific docking systems 0 0 Technical information 0 International Protection (IP) Classes in accordance with DIN EN 0 9 Explanations and information according to VDE Conversions AWG sross section Principles of current carrying capacity Current load Line current load Technical information / definitions / terms Company information 7 Quality management Your partner in many application areas The complete ODU product range Everything from one source Application specific connectors Page

5 and ODU ROB Connectors for a Special Kind of Connector Connectors for are connectors that have restricted guidance and that can be inserted automatically. The force can be applied manually, electrically or pneumatically. Connectors for require simple constructed connectors with very different contacts. Often a large number of mating cycles are called for. The docking system stands or falls on the guide and the contact system that are selected. Following are some of the features that are critical when connectors for are used: Good safeguarding against failure Best guidance features Robust design High quality standards Easy handling during servicing Easy to use High number of mating cycles / long lifetime Flexible insert configuration Best electrical features. Connectors for are ideally suited for such use and satisfy these requirements. From simple standard connectors for Docking and Robot Systems to the complex docking unit ODU supplies the complete range. Page

6 and ODU ROB Application of Connectors for Connectors for have become indispensable in automation engineering. Industrial robots, tool change and depot systems, cable connections and test equipment are just a few examples of the applications for these systems. ODU docking systems are built into combined quick coupling systems (electrical/pneumatic) where they enable the greatest possible flexibility. Page

7 Product Descr. Product Description Page 7

8 Product Descr. Connectors for Product Description ODU systems are mostly used for the following applications: Tool change and depot systems Test equipment Industrial robot systems. Page 8

9 Product Description Product Descr. Advantages of the Connectors Easy assembly Temperature range: 0 C up to +00 C Robust housing made out of aluminium or plastic Housing with EMC protection available sizes Contacts with crimp and solder termination available Exchange of crimp contact within a few seconds Positions: + PE up to + PE, mixed inserts, power inserts Protection class: up to IP available Straight and right-angled cable exit possible High contact reliability due to the established ODU SPRINGTAC contacts High number of mating cycles up to 00,000 Versions with quick-change head available for mating cycles of more than million Floating mounting on docking plates Easy assembly of the insulator anti-rotation High density with small contact diameter (e.g. x 0.7 mm in size ) High variety of contact inserts. The connection system consists of housing, insulator and contacts. These three components can be combined in a multitude of ways. In the crimp version, the contacts can be installed into and removed from the insulator in just a few seconds. The appropriate tools are available for this. In the solder version the contacts are permanently mounted in the insulator and cannot be removed. Page 9

10 Product Descr. Connectors for Product Description Housing Versions for There are three housing versions available: Plastic housing Aluminium housing, nickel-plated Aluminium housing, black anodized. Plastic housing Plastic housing Material: POM, black Protection class: IP in mated condition Operating temperature: 0 C up to +00 C housing sizes Easy assembly from rear of panel Straight and right-angled cable exit possible, sealing plug for unused cable exit is included in the delivery Two-part housing More than 00,000 mating cycles¹) Aluminium housing nickel-plated Aluminium housing, nickel-plated Material: aluminium, nickel-plated Protection class: IP in mated condition (depends on version) Operating temperature: 0 C up to +00 C housing sizes Easy assembly from rear of panel Straight and right-angled cable exit possible, sealing plug for unused cable exit is included in the delivery Two-part housing Available with and without EMC protection More than 00,000 mating cycles¹) Aluminium housing black anodized Aluminium housing, black anodized Material: aluminium, black anodized Protection class: IP 0 Operating temperature: 0 C up to +00 C housing sizes Mountable from front of panel Straight and right-angled cable exit possible, sealing plug for unused cable exit is included in the delivery Two-part housing More than 00,000 mating cycles¹) Housing without shielding and without o-ring: min. 00,000 mating cycles. Housing with shielding and without o-ring: min. 0,000 mating cycles. It is recommended to change the front parts of the housing after 0,000 mating cycles, both socket and pin side. Housing with o-ring: min.,000 mating cycles without maintenance and min. 00,000 mating cycles with maintenance. Page 0

11 Contact Inserts for Product Description Product Descr. Pin and socket inserts with crimp termination The contact inserts consist of an insulator (contact carrier) and the associated number of pin or socket contacts. In the crimped model, the insulator and contacts must be ordered separately. This flexible design allows the contact insert to be equipped individually. Crimp contacts can be installed and removed very quickly. Material Insulator Contacts PBT-GF (UL 9V-0) Cu-alloy surface contact from.0 mm Au surface contact from. mm Ag Pin and Socket inserts with solder termination The contact inserts consist of an insulator (contact carrier) and the associated number of pin or socket contacts. Our solder inserts can cover a larger connection range. The contacts in the solder version are already mounted in the insulator, which means that the delivered contact insert is already completely equipped. Material Insulator fibre-glass reinforced polyester resin (UL 9V-0) Contacts surface Ag Page

12 Product Descr. Connectors for Product Description ODU SPRINGTAC (Contacts with Springwire Technology) The springwire contact is the inspired invention of Otto Dunkel. It offers the highest number of contact surfaces. The springwires are mounted individually and joined optimally to a turned carrier. The individual springwires contact and cushion independently of one another. Unmated Socket Pin Advantages More than 00,000 mating cycles Low contact resistances Large number of independently cushioning contact springs Carrier Expansion ring Spring wires Spark protection Low insertion forces Extremely secure contacting High resistance to vibrations and impacts Long life span due to premium materials and surfaces. Mated Socket Pin Page

13 Product Description Product Descr. Inserts with Quick-Change Head Technology (QCH) for an extremely high number of mating cycles Die ODU SPRINGTAC contacts offer contact stability for up to 00,000 mating cycles. The quickchange head is suitable for applications that require even more mating cycles. Principle behind the quick-change head The connection system consists of an interchangeable front part (connector piece) and a back part (terminal piece). When the contacts suffer from wear, the front part is exchanged in a very short time without it being necessary to separate the connections that are made with the contacts of the back part. Material Insulator Contacts PBT-GF (UL 9V-0) Cu-alloy Crimp contact Crimp contact Part B Terminal piece Part A Connector piece Part C Connector piece Part D Terminal piece Socket side Pin side Terminal pieces stay wired. Connector pieces are exchanged in the Docking System. Contacts at the Terminal piece B and D are respectively crimp contacts. Page

14 Product Descr. Connectors for Product Description Order Information Order example with crimp insert Housing, insulator and contacts must be ordered separately when crimp contacts are used., size Housing: Aluminium, black anodized positions with earthing pin. Socket piece Pin piece Housing Cable clamp Insulator Contacts Earthing contact Picture for example only. Order example with solder insert Housing and insert must be ordered separately when the solder version is used. The contacts are already fixed in the insulator and don t need to be ordered separately., size Housing: aluminium, black anodized positions. Socket part Pin part Housing Cable clamp Insert Picture for example only. Page

15 Product Description Product Descr. Order example with flexible insert With the flexible inserts, the housing, insulator and the flexibly interchangeable modules must be ordered separately. The insulator must be completely filled with modules., size Housing: aluminium, black anodized power modules from the ODU-MAC program for AWG. Socket part Pin part Housing Cable clamp Flexible insert ODU-MAC modules* Contacts* * Order information and technical data see from page 9, as well as the ODU-MAC product catalogue. Order example for the quick-change head The housing and inserts must be ordered separately for the quick-change head version. The contacts for the inserts are included in the delivery. QCH, size Housing: plastic positions with earthing pin. Socket part Pin part Housing Cable clamp Part B Terminal piece Part A Connector piece Part C Connector piece Part D Terminal piece Insert QCH A B C D Socket side Pin side Page

16 Product Descr. Connectors for For Your Notes Page

17 Size Size Page 7

18 Size Housing Plastic Material: POM, black Protection class: IP in mated condition Operating temperature: 0 C up to +00 C Easy assembly from rear of panel Straight and right-angled cable exit possible, sealing plug for unused cable exit is included in the delivery Two-part housing Description Part number Socket piece Pin piece Socket piece Pin piece 7.8 M 0. M Material: aluminium, nickel-plated Protection class: IP in mated condition (depends on version) Operating temperature: 0 C up to +00 C Easy assembly from rear of panel Straight and right-angled cable exit possible, sealing plug for unused cable exit is included in the delivery Two-part housing Available with and without EMC protection Description Part number IP 0 IP EMC protection Socket piece Pin piece Socket piece Pin piece Size Aluminium, nickel-plated M 0. M Page 8

19 Size Aluminium, black anodized Material: aluminium, black-anodized Protection class: IP 0 in mated condition Operating temperature: 0 C up to +00 C Mountable from front of panel Straight and right-angled cable exit possible, sealing plug for unused cable exit is included in the delivery Two-part housing Size Description Part number Thread X Socket piece Pin piece M PG M PG Socket piece Pin piece 8 8 X 0 X. 0 Assembly drilling for all size versions A ± Board spacing in mated position: ± 0. mm B ±0. ±0. Hole A: H9 for pin m Hole B: H9 for pin m ±0. X Board thickness X 0 mm: ± 0. mm: ± 0. 0 mm: ± 0. Page 9

20 Size Pin and Socket Inserts with Crimp Termination Size positions with earthing Socket Pin Contact configuration Socket View on the mating side Description Part number Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N Insulator socket Insulator pin Sealing plug Socket contact Pin contact Earthing pin contact Socket contact Pin contact Earthing pin contact ± 0 ± 0 9 ± 0 Voltage information acc. DIN EN* ) Metal housing Plastic housing Rated voltage 00 V 00 V 0 V 0 V Rated impulse voltage kv kv Pollution degree Crimping tools from page 7. *DIN EN 0- (VDE 00-) : positions with earthing Socket Pin Contact configuration Voltage information acc. DIN EN* ) Metal housing Plastic housing Rated voltage 00 V 0 B V 00 V 00 V Rated impulse voltage kv 7 kv Pollution degree 8 Crimping tools from page 7. *DIN EN 0- (VDE 00-) : Socket View on the mating side 7 9 Description Dimensions insulator (socket piece/pin piece) Dimensions insulator (socket piece/pin piece) 9 Part number Current in A nominal single contact current load Contact diameter in mm... Termination crosssection in mm² Insulator socket Insulator pin Sealing plug Socket contact Pin contact Earthing pin contact Socket contact Pin contact Earthing pin contact Mating force in N 0 ± 0 ± Demating force in N 7 ± Page 0

21 Size 8 positions with earthing Size Socket Pin Contact configuration Socket View on the mating side Description Part number Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N B Insulator socket Insulator pin Sealing plug Socket contact Pin contact ± 7 8 ± Voltage information Metal housing Plastic housing acc. DIN EN* ) Rated voltage 00 V 0 V 0 V 0 V Rated impulse voltage. kv kv Pollution degree No extra earth contact necessary. Earthing is provided via the insulator geometry. Crimping tools from page 7. *DIN EN 0- (VDE 00-) : positions Socket Pin Contact configuration Socket B View on the mating side Description Dimensions insulator (socket piece/pin piece). Part number Insulator socket Insulator pin Sealing plug Socket contact Pin contact Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm². Mating force in N ± 0 Socket contact Pin contact ± 0. Demating force in N 8 ± 0 Voltage information acc. DIN EN* ) Metal housing Plastic housing Rated voltage 0 V 0 V7 0 V 80 V 8 9 Rated impulse voltage kv. kv Pollution degree Without earthing contact. Crimping tools from page 7. *DIN EN 0- (VDE 00-) : B Dimensions insulator (socket piece/pin piece) Page

22 Size Size Pin- and Socket Inserts with Crimp Termination positions with earthing and 9 pilot contacts Socket Pin Contact configuration Socket View on the mating side B 9 Description Part number Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Insulator socket Insulator pin Sealing plug Sealing plug Socket contact (0,, E) Socket contact ( to 9) / 0. Pin contact (0,, E) Pin contact ( to 9) / 0. Mating force in N Demating force in N 0 ± 7 8 ± Voltage information Metal housing Plastic housing acc. DIN EN* ) for contact diameter. Rated voltage 0 V 0 V 800 V 0 V Rated impulse voltage kv kv Pollution degree for contact diameter.0 Rated voltage 00 V 0 V 0 V 0 V Rated impulse voltage. kv kv Pollution degree Dimensions insulator (socket piece/pin piece) No extra earth contact necessary. Earthing is provided via the insulator geometry. Crimping tools from page 7. *DIN EN 0- (VDE 00-) : Page

23 Size Pin and Socket Inserts with Solder Termination positions Size Socket Pin Contact configuration Socket View on the mating side Description Part number Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N Socket insert Pin insert ± 8 ± Voltage information acc. DIN EN* ) Metal housing Plastic housing Rated voltage 00 V 0 V 00 V 0 V Rated impulse voltage kv kv Pollution degree B Dimensions insulator (socket piece/pin piece). 7 *DIN EN 0- (VDE 00-) : positions with earthing Socket Pin Contact configuration Socket View on the mating side B Description Part number Socket insert Pin insert Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N ± 0 ± 8 Voltage information acc. DIN EN* ) Metal housing Plastic housing Rated voltage 0 V 00 V 0 V 00 V Rated impulse voltage kv kv Pollution degree Dimensions insulator (socket piece/pin piece).. 7 *DIN EN 0- (VDE 00-) : Page

24 Connectors for Size Size Pin and Socket Inserts with Solder Termination B positions with earthing / positions with earthing Socket Pin Contact configuration B Socket View on the mating side Description Part number Socket insert Pin insert Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N 0.0. ± 8 0 ± 7 Socket insert Pin insert ± 0 ± 8 B Voltage information Metal housing Plastic housing acc. DIN EN* ) Rated voltage 00 V 00V 00 V 00 V Rated impulse voltage kv kv Pollution degree Dimensions insulator (socket piece/pin piece). 7 *DIN EN 0- (VDE 00-) : positions Socket Pin Contact 9 8 configuration Socket View on the mating side Description Part number Socket insert Pin insert Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N.. ± 8 0 ± 7 7 Voltage information acc. DIN EN* ) Metal housing Plastic housing Rated voltage 800 V 0 V,000 V 0 V 9 8 kv kv Rated impulse voltage Pollution degree 7 *DIN EN 0- (VDE 00-) : Dimensions insulator (socket piece/pin piece). 7. Page

25 Size B positions with earthing Size Socket Pin Contact configuration Socket View on the mating side Description Part number Socket insert Pin insert Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N.0. 0 ± 0 ± 0 Voltage information Metal housing 9 8 Plastic housing acc. DIN EN* ) 7 Rated voltage 00 V 00 V 00 V 00 V Rated impulse voltage kv kv Pollution degree Dimensions insulator (socket piece/pin piece). 7 *DIN EN 0- (VDE 00-) : positions with earthing Socket Pin Contact configuration Socket View on the mating side 9 8 Description Part number Socket insert Pin insert Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N ± 7 8 ± 7 Voltage information acc. DIN EN* ) Metal housing Plastic housing Rated voltage 0 V V 0 V V Rated impulse voltage kv. kv Pollution degree Dimensions insulator (socket piece/pin piece). 7 *DIN EN 0- (VDE 00-) : Page

26 Size Quick-Change Head System (QCH) with Crimp Termination Size positions with grounding / 8 positions with grounding Socket Pin Contact configuration Socket View on the mating side Description Part number Insulator part A Insulator part B Insulator part C Insulator part D Current in A nominal single contact current load Contact diameter X in mm Termination diameter Y in mm Termination crosssection in mm² Mating force in N Demating force in N to. 0 ± 7 ± Insulator part A Insulator part B Insulator part C Insulator part D to.0 0 ± 7 8 ± Crimping tools from page 7. Operating voltage in the metal housing: 0 V /. kv / Dimensions insulator Crimp contact Crimp contact Part B Terminal piece Y X Part A Connector piece 7 Part C Connector piece Y Part D Terminal piece Socket side Pin side Terminal pieces stay wired. Connector pieces are exchanged in the Docking System. Contacts at the Terminal piece B and D are respectively crimp contacts. Page

27 Size Current Carrying Capacity for Fully Equipped Inserts (Excerpt) Derating curves for crimp inserts Size 0 0 Current carrying capacity in A Ambient temperature in C Ambient temperature in C Insert with equipped with contact diameter.0 mm (cable cross-section. mm²). Current carrying capacity in A Insert with equipped with contact diameter.0 mm (cable cross section. mm²). Derating curves for crimp inserts Current carrying capacity in A Ambient temperature in C Insert with equipped with contact diameter.0 mm (cable cross-section 0.0 mm²). Current carrying capacity in A Ambient temperature in C Insert with equipped with contact diameter 0.7 mm (cable cross-section 0.8 mm²). Legend of diagrams Max. temperature of contact material Basis curve Corrected curve Further derating curves see next page. Page 7

28 Size Current Carrying Capacity for Fully Equipped Inserts (Excerpt) Derating curves for crimp inserts with mixed insert 0 Current carrying capacity in A Size Ambient temperature in C Ambient temperature in C Contact diameter.0 mm Contact diameter. mm Mixed insert: Insert with equipped with contact diameter. mm (cable cross-section. mm²) and contact diameter.0 mm (cable cross-section 0.0 mm²). Current carrying capacity in A 0 Derating curve for quick-change head system Current carrying capacity in A Ambient temperature in C Insert / with / equipped with contact diameter.0 mm (cable cross-section mm²). Legend of diagrams Max. temperature of contact material Basis curve Corrected curve Further derating curves on request. Page 8

29 For Your Notes Size Page 9

30 For Your Notes Size Page 0

31 Size Size Page

32 Size Housing Size Plastic Material: POM, black Protection class: IP in mated condition Operating temperature: 0 C up to +00 C Easy Assembly from rear of panel Straight and right-angled cable exit possible, sealing plug for unused cable exit is included in the delivery Two-part housing Description Part number Socket piece Pin piece Socket piece Pin piece M M. Material: aluminium, nickel-plated Protection class: IP in mated condition (depends on version) Operating temperature: 0 C up to +00 C Easy Assembly from rear of panel Straight and right-angled cable exit possible, sealing plug for unused cable exit is included in the delivery Two-part housing Available with and without EMC protection Description Part number IP 0 IP EMC protection Socket piece Pin piece Socket piece Pin piece Aluminium, nickel-plated 7.8 M M. Page

33 Size Aluminium, black anodized Material: aluminium, black anodized Protection class: IP 0 Operating temperature: 0 C up to +00 C Mountable from front of panel Straight and right-angled cable exit possible, sealing plug for unused cable exit is included in the delivery Two-part housing Size Description Part number Thread X Socket piece Pin piece M PG M PG Socket piece Pin piece 8 8 X 0. 0 X Assembly drilling for all size versions A 0 ± ±0. ±0.0 X Board spacing in mated condition: ± 0. mm Board thickness X 0 mm: ± 0. mm: ± 0. 0 mm: ± 0. B 0 ±0. Hole A: H9 for pin m Hole B: H9 for pin m Page

34 Size Pin and Socket Inserts with Crimp Termination positions with earthing / positions with earthing Size Socket Pin Contact configuration Socket View on the mating side Description Part number Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N Insulator socket Insulator pin Sealing plug Socket contact Pin contact Earthing pin contact Socket contact Pin contact Earthing pin contact Insulator socket Insulator pin Sealing plug ± ± Socket contact Pin contact Earthing pin contact Socket contact Pin contact Earthing pin contact ± 0 0 ± 0 Voltage information acc. DIN EN* ) Metal housing Plastic housing Rated voltage 800 V 0 V 800 V 0 V Rated impulse voltage kv kv Pollution degree Dimensions insulator (socket piece/pin piece).... Crimping tools from page 7. *DIN EN 0- (VDE 00-) : Page

35 Size positions with earthing Socket Pin Contact configuration Socket View on the mating side Description Part number Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N Size Insulator socket Insulator pin Sealing plug Socket contact Pin contact Earthing pin contact Socket contact Pin contact Earthing pin contact ± 0 80 ± Voltage information acc. DIN EN* ) Metal housing Plastic housing Rated voltage 00 V 0 V 00 V 0 V Rated impulse voltage kv kv Pollution degree Crimping tools from page 7. *DIN EN 0- (VDE 00-) : Dimensions insulator (socket piece/pin piece) Page

36 Size Pin and Socket Inserts with Crimp Termination positions with earthing and pilot contacts Size Socket Pin Contact configuration Socket View on the mating side Description Part number Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N B 7 Insulator socket Insulator pin Sealing plug socket/pin Sealing plug socket Sealing plug pin Socket contact Socket contact Pin contact Pin contact Socket contact Pin contact Socket contact Pin contact ± ± Voltage information Metal housing Plastic housing acc. DIN EN* ) for contact diameter.0 Rated voltage 00 V 800 V 00 V 800 V Rated impulse voltage kv 8 kv Pollution degree for contact diameter. Rated voltage 0 V 0 V 00 V 800 V Rated impulse voltage kv 8 kv Pollution degree Dimensions insulator (socket piece/pin piece) No extra earth contact necessary. Earthing is provided via the insulator geometry. Crimping tools from page 7. *DIN EN 0- (VDE 00-) : Page

37 Size Pin and Socket Inserts with Solder Termination positions with earthing Socket Pin Contact configuration Socket View on the mating side Description Part number Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N Size Socket insert Pin insert ± ± Voltage information acc. DIN EN* ) Metal housing Plastic housing Rated voltage 0 V 0 V 800 V 0 V Rated impulse voltage kv kv Pollution degree Dimensions insulator (socket piece/pin piece).. *DIN EN 0- (VDE 00-) : positions with earthing / positions with earthing Socket Pin Contact configuration Socket 0 B View on the mating side Description Part number Socket insert Pin insert Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N ± ± Socket insert Pin insert ± 0 0 ± Voltage information Metal housing B Plastic housing acc. DIN EN* ) 7 8 Rated voltage 0 V 0 V9 800 V 0 V Rated impulse voltage kv kv Pollution degree 0 B *DIN EN 0- (VDE 00-) : Dimensions insulator (socket piece/pin piece) Page 7

38 Size Pin and Socket Inserts with Solder Termination positions with earthing Size Socket Pin Contact configuration Socket View on the mating side Description Part number Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N 0 B Socket insert Pin insert ± 0 80 ± Voltage information Metal housing Plastic housing acc. DIN EN* ) Rated voltage 0 V V 0 V V Rated impulse voltage. kv. kv Pollution degree *DIN EN 0- (VDE 00-) : Dimensions insulator (socket piece/pin piece) positions with earthing 0 B Socket Pin Contact configuration Socket View on the mating side Description Part number Socket insert Pin insert Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N.0. ± 0 ± 0 Voltage information acc. DIN EN* ) Metal housing Plastic housing Rated voltage 0 V V 0 V V Rated impulse voltage. kv. kv Pollution degree *DIN EN 0- (VDE 00-) : Dimensions insulator (socket piece/pin piece) Page 8

39 Size positions with earthing Socket Pin Contact configuration Socket View on the mating side Description Part number Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N Size Socket insert Pin insert ± 0 0 ± Voltage information acc. DIN EN* ) Metal housing Plastic housing Rated voltage 00 V 0 V 00 V 0 V Rated impulse voltage. kv. kv Pollution degree *DIN EN 0- (VDE 00-) : Dimensions insulator (socket piece/pin piece).. 7. Page 9

40 Size Quick-Change Head System (QCH) with Crimp Termination positions with earthing / positions with earthing Size Socket Pin Contact configuration Socket View on the mating side Description Part number Insulator part A Insulator part B Insulator part C Insulator part D Current in A nominal single contact current load Contact diameter in mm Termination diameter in mm Termination crosssection in mm² Mating force in N Demating force in N to. 70 ± 0 0 ± 0 0 B Insulator part A Insulator part B Insulator part C Insulator part D to. 90 ± 0 80 ± Crimping tools from page 7. Operating voltage positions with earthing in metal housing: 0 V / kv / Operating voltage positions with earthing in metal housing: 0 V /. kv / Dimensions insulator Crimp contact Y. X... Crimp contact.. Part B Terminal piece Part A Connector piece Part C Connector piece Y Part D Terminal piece Socket side Pin side Terminal pieces stay wired. Connector pieces are exchanged in the Docking System. Contacts at the Terminal piece B and D are respectively crimp contacts. Page 0

41 Size Current Carrying Capacity for Fully Equipped Inserts (Excerpt) Derating curves for crimp inserts 0 0 Current carrying capacity in A Current carrying capacity in A 0 0 Size Ambient temperature in C Ambient temperature in C Insert with equipped with contact diameter.0 mm (cable cross-section. mm²). Insert with equipped with contact diameter.0 mm (cable cross-section. mm²). For insert equipped with contact diameter.0 mm (cable cross-section. mm²) the derating curve from can be used. Derating curves for solder inserts Current carrying capacity in A Ambient temperature in C Insert with equipped with contact diameter.0 mm (cable cross-section.0 mm²). Legend of diagrams Max. temperature of contact material Basis curve Corrected curve Further derating curves on request. Page

42 For Your Notes Size Page

43 Size Size Page

44 Size Housing Plastic Material: POM, black Protection class: IP in mated condition Operating temperature: 0 C up to +00 C Easy assembly from rear of panel Straight and right-angled cable exit possible, sealing plug for unused cable exit is included in the delivery Two-part housing Size Description Part number Socket piece Pin piece Socket piece.8.8 Pin piece M. 8. M. 0 Aluminium, nickel-plated Material: aluminium, nickel-plated Protection class: IP in mated condition (depends on version) Operating temperature: 0 C up to +00 C Easy assembly from rear of panel Straight and right-angled cable exit possible, sealing plug for unused cable exit is included in the delivery Two-part housing Available with and without EMC protection Description Part number IP 0 IP EMC protection Socket piece Pin piece Socket piece.8.8 Pin piece M. 8. M. 0 Page

45 Size Aluminium, black anodized Material: aluminium, black anodized Protection class: IP 0 Operating temperature: 0 C up to +00 C Mountable from front of panel Straight and right-angled cable exit possible, sealing plug for unused cable exit is included in the delivery Two-part housing Description Part number Thread X Socket piece Pin piece M PG M PG 9 Size Socket piece Pin piece X X 8. 0 Assembly drilling for all size versions A 0 ± ±0. ±0.0 X Board spacing in mated position: ± 0. mm Board thickness X 0 mm: ± 0. mm: ± 0. 0 mm: ± 0. 0 ±0. B Hole A: H9 for pin m Hole B: H9 for pin m Page

46 Size Pin and Socket Inserts with Crimp Termination positions with earthing Socket Pin Contact configuration Socket View on the mating side Description Part number Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N Size Insulator socket Insulator pin Socket contact Pin contact Earthing socket Socket contact Pin contact Earthing socket Socket contact Pin contact Earthing socket ± ± ± 0 ± 0 Voltage information Metal housing Plastic housing acc. DIN EN* ) Rated voltage,000 V 00 V,00 V 800 V Rated impulse voltage kv kv Pollution degree Dimensions insulator (socket piece/pin piece) Insulator without holding clip contacts are inserted from the side. Crimping tools from page 7. *DIN EN 0- (VDE 00-) : positions with earthing Socket Pin Contact configuration Socket View on the mating side Description Part number Insulator socket Insulator pin Socket contact Pin contact Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N ± 90 ± 0 Voltage information acc. DIN EN* ) Metal housing Plastic housing Rated voltage,000 V 00 V,0 V 00 V Rated impulse voltage kv kv Pollution degree No extra earth contact necessary. Earthing is provided via the insulator geometry. Insulator without holding clip contacts are inserted from the side. A Crimping tools from page 7. B C *DIN EN 0- (VDE 00-) : Page D E Dimensions insulator (socket piece/pin piece)

47 Size positions with earthing Socket Pin Contact configuration Socket View on the mating side Description Part number Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N Insulator socket Insulator pin Sealing plug socket Sealing plug pin Socket contact Earthing socket contact Pin contact Socket contact Earthing socket contact Pink contact Socket contact Earthing socket contact Pin contact Socket contact Earthing socket contact Pin contact ± 0 0± 0 Size Voltage information acc. DIN EN* ) Metal housing Plastic housing Rated voltage,00 V 0 V,00 V 0 V Rated impulse voltage kv kv Pollution degree Dimensions insulator (socket piece/pin piece) Crimping tools from page 7. *DIN EN 0- (VDE 00-) : Page 7

48 Size Pin and Socket Inserts with Crimp Termination positions with earthing Socket Pin Contact configuration Socket View on the mating side Description Part number Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N Size Insulator socket Insulator pin Sealing plug socket Sealing plug pin Socket contact Earthing socket contact Pin contact Socket contact Earthing socket contact Pin contact Socket contact Earthing socket contact Pin contact ± 0 0 ± 0 Voltage information acc. DIN EN* ) Metal housing Plastic housing Rated voltage,00 V 0 V,00 V 0 V Rated impulse voltage kv kv Pollution degree Dimensions insulator (socket piece/pin piece) Crimping tools from page 7. *DIN EN 0- (VDE 00-) : Page 8

49 Size positions with earthing Socket Pin Contact configuration Socket View on the mating side Description Part number Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N A B C D E Insulator socket Insulator pin Sealing plug socket Sealing plug pin Socket contact Pin contact Earthing pin contact Socket contact Pin contact Earthing pin contact / ± 0 80 ± Size Voltage information acc. DIN EN* ) Metal housing Plastic housing Rated voltage 800 V 0 V 800 V 0 V Rated impulse voltage kv kv Pollution degree Crimping tools from page 7. *DIN EN 0- (VDE 00-) : Dimensions insulator (socket piece/pin piece) Page 9

50 Size Pin and Socket Inserts with Crimp Termination positions with earthing Socket Pin Contact configuration Socket View on the mating side Description Part number Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N Size Insulator socket Insulator pin Sealing plug socket Sealing plug pin Socket contact Pin contact Earthing pin contact Socket contact Pin contact Earthing pin contact / 0. 0 ± 0 0 ± Voltage information acc. DIN EN* ) Metal housing Plastic housing Rated voltage 800 V 0 V 800 V 0 V Rated impulse voltage kv kv Pollution degree Crimping tools from page 7. *DIN EN 0- (VDE 00-) : Dimensions insulator (socket piece/pin piece) Page 0

51 Size Pin and Socket Inserts with Solder Termination positions with earthing and pilot contacts Socket Pin Contact configuration Socket View on the mating side Description Part number Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N Socket contact Pin contact ± 0 90 ± 0 Size Voltage information Metal housing Plastic housing acc. DIN EN* ) for contact diameter.0 Rated voltage,0 V 00 V,0 V 00 V Rated impulse voltage kv kv Pollution degree for contact diameter. Rated voltage 0 V L 0 V,00 V 0 V Rated impulse voltage kv kv Pollution degree L L Dimensions insulator (socket piece/pin piece) *DIN EN 0- (VDE 00-) : positions with earthing und pilot contacts Socket Pin Contact configuration Socket View on the mating side L L Description Part number Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Socket contact Pin contact Mating force in N Demating force in N 80 ± 70 ± L L L Voltage information Metal housing Plastic housing acc. DIN EN* ) for contact diameter.0 Rated voltage,0 V 00 V,00 V 0 V L Rated impulse voltage kv kv Pollution degree for contact diameter. Rated voltage,0 V 00 V,0 V 00 V Rated impulse voltage kv kv Pollution degree Dimensions insulator (socket piece/pin piece) *DIN EN 0- (VDE 00-) : Page

52 Size Pin and Socket Inserts with Solder Termination L L L positions with earthing Socket Pin Contact configuration Socket View on the mating side Description Part number Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N Size Socket insert Pin insert ± 00 ± Voltage information Metal housing Plastic housing L L acc. DIN EN* ) Rated voltage,0 V L 00 V,0 V 00 V Rated impulse voltage kv kv Pollution degree *DIN EN 0- (VDE 00-) : Dimensions insulator (socket piece/pin piece) L L L positions with earthing Socket Pin Contact configuration Socket View on the mating side Description Part number Socket insert Pin insert Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N.0 0 ± 0 0 ± Voltage information Metal housing Plastic housing acc. DIN EN* ) Rated voltage,000 V 00 V,0 V 00 V Rated impulse voltage kv kv Pollution degree *DIN EN 0- (VDE 00-) : Dimensions insulator (socket piece/pin piece) A A B C B C D E D E Page 7 8

53 Connectors for Docking and Robot Systems Size positions with earthing / positions with earthing / positions with earthing Socket Pin Contact configuration Socket View on the mating side Description Part number Socket insert Pin insert Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N ± 90 ± 0 Size Socket insert Pin insert ± 0 0 ± Socket insert Pin insert ± 0 0 ± Voltage information 7 Metal housing Plastic housing acc. DIN EN* ) Rated voltage 9,000 V 00 V,000 V 00 V 0 9 Rated impulse voltage 0 kv kv Pollution degree *DIN EN 0- (VDE 00-) : A B C D E A B C D E Dimensions insulator (socket piece/pin piece) A A B C B C D E D E A C E A B C D E geändert 0.. Ausschnitt gelöscht geändert 0.. Ausschnitt gelöscht Page

54 9 0 Connectors for Size Pin and Socket Inserts with Solder Termination positions with earthing Socket Pin Contact configuration Socket View on the mating side Description Part number Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N Size Socket insert Pin insert ± 0 0 ± 0 Voltage information acc. DIN EN* ) Metal housing Plastic housing Rated voltage 00 V 00 V 00 V 00 V Rated impulse voltage kv kv Pollution degree *DIN EN 0- (VDE 00-) : A B C A B C Dimensions insulator (socket piece/pin piece) D E D E geändert 0.. Ausschnitt gelöscht Page

55 Pin and Socket Inserts with Solder Termination Size positions with earthing / positions with earthing Socket Pin Contact 7 configuration Socket View on the mating side A B C D E Description A B C D E Part number Socket insert Pin insert Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N.. 8 ± 0 7 ± Size A A Socket insert Pin insert ± 0 80 ± B C B C D E D E Voltage information Metal housing 9 Plastic housing acc. DIN EN* ) 0 8 Rated voltage 00 V 00 V 9 00 V 00 V 7 Rated impulse voltage kv kv Pollution degree *DIN EN 0- (VDE 00-) : geändert 0.. Ausschnitt gelöscht Dimensions insulator (socket piece/pin piece) geändert 0.. Ausschnitt gelöscht Page

56 Connectors for Size Pin and Socket Inserts with Solder Termination A A B C B C positions with earthing D E D E Socket Pin Contact configuration Socket View on the mating side Description Part number Current in A nominal single contact current load Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N Size Socket insert Pin insert ± 0 0 ± Voltage information Metal housing Plastic housing acc. DIN EN* ) Rated voltage 00 V 00 V 00 V 00 V geändert 0.. Rated impulse voltage kv kv Ausschnitt gelöscht Pollution degree *DIN EN 0- (VDE 00-) : Dimensions insulator (socket piece/pin piece) Page

57 Connectors for Quick-Change Head System (QCH) with Crimp Termination Size positions with earthing / positions with earthing Socket Pin Contact configuration A Socket B C View on the D mating side A B C D E A B C D E E Description Part number Current in A A B C D E Insulator part A Insulator part B Insulator part C Insulator part D nominal single contact current load Kompletter Einsatz Contact diameter in mm Termination crosssection in mm² Mating force in N Demating force in N. 0. to. 90 ± 0 80 ± Size Insulator part A Insulator part B Insulator part C Insulator part D to. 0 ± 0 0 ± 9 0 Crimping tools from page 7. Operating voltage 8 positions with earthing in the metal housing: 00 V /. kv / 9 Operating voltage positions 7 with earthing in the metal housing: V /. kv / geändert 0.. Dimensions insulator Ausschnitt gelöscht geändert 0.. Ausschnitt gelöscht Crimp contact Crimp contact Part B Terminal piece Part A Connector piece. Part C Connector piece. Part D Terminal piece Socket side Pin side Terminal pieces stay wired. Connector pieces are exchanged in the Docking System. Contacts at the Terminal piece B and D are respectively crimp contacts. Page 7

58 ODU-MAC Modules Size Insert with Modular Construction Size The combination of two proven ODU product series allows flexible use of the inserts. You get what you want: Combination of inserts with integrated modules from the ODU-MAC (modular rectangular connector) program Room for 8 units ( unit =. mm) Modules for signals, power, high power, high voltage, fluid, compressed air, fibre-optic and shielded implementation / high-speed-connector can be integrated Suitable for housing size Insulator material: PBT. The two-part insulator makes it possible to assemble the ODU-MAC modules without large time expenditures. The modules are simply slide into the insulator and then clipped together after the assembly has been completed. Part number Insulator socket Insulator pin Page 8

59 ODU-MAC Modules Size Modules from the ODU-MAC Program for a Flexible Construction of the Inserts Modules Description Units/width Electrical properties 0 positions for turned contacts contact : 0.7 mm unit (. mm) Operating voltage: ) 0 V Rated impulse voltage: ),00 V Continuous current max.: ) A at 0.8 mm² Pollution degree: ) Mating cycles: min. 00,000 Size 0 positions for stamped contacts unit (. mm) Operating voltage: ) V Rated impulse voltage: ),00 V Continuous current max.: ) A at 0.8 mm² Pollution degree: ) Mating cycles: min.,000 positions for turned contacts contact :.0 mm units (.08 mm) Operating voltage: ) 00 V Rated impulse voltage: ),000 V Continuous current max.: ). A at 0. mm² Pollution degree: ) Mating cycles: min. 00,000 positions for turned contacts contact :.0 mm units (7. mm) Operating voltage: ) 0 V Rated impulse voltage: ),00 V Continuous current max.: ). A at 0. mm² Pollution degree: ) Mating cycles: min. 00,000 positions for turned contacts contact :. mm units (.08 mm) Operating voltage: ) 00 V Rated impulse voltage: ),00 V Continuous current max.: ) 7 A at. mm² Pollution degree: ) Mating cycles: min. 00,000 positions for turned contacts contact :. mm units (7. mm) Operating voltage: ) 00 V Rated impulse voltage: ),000 V Rated current: ) 8 A at AWG Pollution degree: ) Mating cycles: min. 00,000 According to DIN EN 0.: 007 (VDE 00 part ). Definition continuous current see page. Page 9

60 ODU-MAC Modules Size Modules Description Units/width Electrical properties Size positions for turned contacts contact :.0 mm units (7. mm) Operating voltage: ) 00 V Rated impulse voltage: ),000 V Continuous current max.: ) 8 A at mm² Pollution degree: ) Mating cycles: min. 00,000 positions for turned contacts contact :.0 mm units (.7 mm) Operating voltage: ),000 V Rated impulse voltage: ),000 V Continuous current max.: ) 9 A at mm² Pollution degree: ) Mating cycles: min. 00,000 positions high voltage module with turned contacts contact :. mm units (7. mm) Operating voltage: ),00 V Rated impulse voltage: ) 0,000 V Continuous current max.: ) 7 A at. mm² Pollution degree: ) Mating cycles: min. 00,000 positions power module with turned contacts contact :.0 mm units (0. mm) Operating voltage: ),00 V Rated impulse voltage: ) 0,000 V Continuous current max.: ) 8 A at mm² Pollution degree: ) Mating cycles: min. 00,000 positions for power contacts ODU LAMTAC (contacts with lamella technology) with turned contacts contact : 8.0 mm units (. mm) Operating voltage: ) 00 V Rated impulse voltage: ),000 V Continuous current max.: ) A at mm² Pollution degree: ) Mating cycles: min. 0,000 positions for power contacts ODU SPRINGTAC (contacts with springwire technology) with turned contacts contact : 8.0 mm units (. mm) Operating voltage: ) 00 V Rated impulse voltage: ),000 V Continuous current max.: ) A at mm² Pollution degree: ) Mating cycles: min. 00,000 According to DIN EN 0.: 007 (VDE 00 part ). Definition continuous current see page. Page 0

61 ODU-MAC Modules Size Modules Description Units/width Electrical properties position for power contacts ODU LAMTAC (contacts with lamella technology) contact 0 mm or contact mm 7 units (7.78 mm) at both versions Version: 0 mm mm Operating voltage: ) 0 V 00 V Rated impulse voltage: ),000 V,000 V Continuous current max.: ) 79 A 0 A at mm² at 0 mm² Pollution degree: ) Mating cycles: min. 0,000 min. 0,000 Size position for high voltage contacts 8 units (0. mm) Operating voltage: ),00 V Rated impulse voltage: ) 0,000 V Pollution degree: ) Mating cycles: min. 0,000 positions for 0 Ω coaxial contacts non-magnetic units (7. mm) Frequency range: 0 to. GHz Mating cycles: min. 0,000 positions for 0 Ω coaxial contacts units (.7 mm) Frequency range: 0 to. GHz Mating cycles: min. 00,000 positions for 0 Ω coaxial contacts SMA termination units (.7 mm) Frequency range: 0 to 9.0 GHz Mating cycles: min. 00,000 positions for 0 Ω coaxial contacts high voltage non-magnetic units (.7 mm) Frequency range: 0 to 0. GHz Mating cycles: min. 00,000 According to DIN EN 0.: 007 (VDE 00 part ). Definition continuous current see page. Page

62 ODU-MAC Modules Size Modules Description Units/width Electrical properties positions for 7 Ω coaxial contacts units (.7 mm) Frequency range: 0 to GHz Mating cycles: min. 00,000 Size Module positions for compressed air valves units (.7 mm) Tube diameter: max. mm Mating cycles: min.,000 Module position for compressed air valve 8 units (0. mm) Tube diameter: max. mm Mating cycles: min.,000 Module positions for compressed air valves units (0. mm) Tube diameter: max. mm Mating cycles: min.,000 Module for fluid coupling plug units (.7 mm) Mating cycles: min.,000 positions for fibre-optic contacts for plastic fibre units (.7 mm) Insertion loss typical:. db at 70 nm Mating cycles: min. 00,000 Page

63 ODU-MAC Modules Size Modules Description Units/width Electrical properties positions for fibre-optic contacts for plastic fibre POF units (.08 mm) Insertion loss typical:. db at 70 nm Mating cycles: min. 0,000 Size positions for fibre-optic contacts for fibre-glass units (0. mm) Insertion loss typical:.0 db at 70 nm Mating cycles: min. 00,000 to 0 positions, shielded implementation / high-speed-connector insert size 0 units (.7 mm) Mating cycles: min.,000 suitable for all common bus systems to positions, shielded implementation / high-speed-connector insert size units (. mm) Mating cycles: min.,000 With springwire: min. 0,000 suitable for all common bus systems to 8 positions, shielded implementation / high-speed-connector insert size 7 units (7.78 mm) Mating cycles: min.,000 With springwire: min. 0,000 suitable for all common bus systems CAT A 0 Gb/s 0 to 0 positions, shielded implementation / high-speed-connector insert size 8 units (0. mm) Mating cycles: min.,000 suitable for all common bus systems Page

64 ODU-MAC Modules Size Modules Description Units/width Electrical properties Empty modules unit (. mm) Size units (7. mm) units (.7 mm) Coding modules unit (. mm) Pin protection modules unit (. mm) You can find further information in the catalogue ODU-MAC. Page

65 Size Current Carrying Capacity for Fully Equipped Inserts (Excerpt) Derating curves for crimp inserts Current carrying capacity in A Ambient temperature in C Ambient temperature in C Insert with equipped with contact diameter.0 mm (cable cross-section 0 mm²). Current carrying capacity in A Insert with equipped with contact diameter.0 mm (cable cross-section mm²). Size Current carrying capacity in A Ambient temperature in C Ambient temperature in C Insert with equipped with contact diameter.0 mm (cable cross-section mm²). Current carrying capacity in A Insert with equipped with contact diameter.0 mm (cable cross-section mm²). 0 0 Current carrying capacity in A Ambient temperature in C Ambient temperature in C Insert with equipped with contact diameter. mm (cable cross-section. mm²). Current carrying capacity in A Insert with equipped with contact diameter. mm (cable cross-section. mm²). Page

66 Size Current Carrying Capacity for Fully Equipped Inserts (Excerpt) Derating curves for solder inserts with mixed inserts Size Current carrying capacity in A Ambient temperature in C Ambient temperature in C Contact diameter.0 mm Contact diameter. mm Mixed inserts: Insert with equipped with contact diameter.0 mm (cable cross-section mm²) and contact diameter. mm (cable cross-section. mm²). Current carrying capacity in A Current carrying capacity in A Ambient temperature in C Ambient temperature in C Contact diameter.0 mm Contact diameter. mm Mixed inserts: Insert with equipped with contact diameter.0 mm (cable cross-section 0 mm²) and contact diameter. mm (cable cross-section. mm²). Derating curves for solder inserts Current carrying capacity in A Current carrying capacity in A Page Ambient temperature in C Insert with equipped with contact diameter.0 mm (cable cross-section mm²). Current carrying capacity in A Ambient temperature in C Insert with equipped with contact diameter.0 mm (cable cross-section mm²).

67 Size Current Carrying Capacity for Fully Equipped Inserts (Excerpt) Derating curves for solder inserts Current carrying capacity in A Ambient temperature in C Ambient temperature in C Insert with equipped with contact diameter.0 mm (cable cross-section 0 mm²). Current carrying capacity in A Insert with equipped with contact diameter.0 mm (cable cross-section 0 mm²). Size Current carrying capacity in A Ambient temperature in C Insert with equipped with contact diameter. mm (cable cross-section. mm²). Current carrying capacity in A Ambient temperature in C Insert with equipped with contact diameter. mm (cable cross-section. mm²). Current carrying capacity in A Ambient temperature in C Insert with * ) equipped with contact diameter. mm (cable cross-section. mm²). * For insert with equipped with contact diameter. mm (cable crosssection. mm²) the derating curve with can be used. Legend of diagrams Max. temperature of contact material Basis curve Corrected curve Further derating curves on request. Page 7

68 For Your Notes Size Page 8

69 Accessories Accessories Page 9

70 Accessories Accessories Recommended cable clamp Size Part number Cable diameter in mm Plastic Metal For EMC housing M PG Colour Metric thread cable clamp Accessories to.9 brass to. brass to.0 0. grey to. 0. brass to.9 brass to. brass to.. grey to.0. grey to.. brass to.. brass to brass to.9 9 brass to.0 9 brass to.0. grey to.0. grey to.0. brass to.. brass Material: PA, grey respectively brass, nickel-plated for EMC protection. PG cable clamp Maintenance kit for ODU SPRINGTAC and ODU LAMTAC contacts Contact lubrication improves the mechanical characteristics of contact systems. We recommend that the contact surfaces also be cleaned before being lubricated in order to remove impurities. With proper care, it is possible to minimize significantly the wear caused by frequent matings and reduce the insertion forces. The cleaning and lubrication interval must be adapted individually to the conditions, and these steps should be carried out only with products recommended by the contact manufacturer. ODU has put together a maintenance kit for this step so that lubrication can be carried out directly at your site. A cleaning brush and a special cleaning towel, together with precise instructions, allow optimal care of the contacts. The maintenance kit can be used for all ODU contacts and connectors as long as no other specifications apply. Part number: The technical characteristics of the maintenance kit are given on our website: anleitungen/ pdf Page 70

71 Assembly Instruction and Crimp Information ODU ROB Assembly, Crimping Page 7

72 Assembly, Crimping Assembly Instruction Sealing plug ODU ROB Assembly, Crimping Retaining ring Pin housing front part Contact insert Housing back part. Slide the cable clamp and the cables, one after the other, through the back part of the housing.. Connect the stripped line to the contacts. If the housing is made of metal, earth the housings earthing wire.. Screw the front and back parts of the housing together and tighten the cable clamp.. Slide the complete housing into the docking plate and fix in place with retaining ring. Tightening torque: Size I und II = 0.8 N Size III = N Page 7

73 Assembly, Crimping Crimping Tools and Contact Preparation Contact processing for the production of connecting cables via crimping creates a secure, durable and corrosion-free contact. It requires little skill and can be performed by non-experts. The cold pressing operation compresses the conductor and contact material, creating a gas-tight connection between contact and conductor. A stiffening of the conductor at the connection, as it is possible with soldering, cannot occur. 8-point crimping tool For cross-sections from 0.08 to. mm² (AWG 8 to AWG )*. The crimping tool has an internal ratchet which opens only after the crimp process has been completed. With user-friendly digital display. Part number: ODU ROB Assembly, Crimping 8-point crimping tool For cross-sections from 0.8 to. mm² (AWG to AWG )*. The crimping tool has an internal ratchet which opens only after the crimp process has been completed. Part number: Hexagonal crimping tool For cross-sections of. mm²,. mm²,.0 mm² and.0 mm². The crimping tool has an internal ratchet which opens only after the crimp process has been completed. Part number: Hydraulic crimping tool For cross-sections of 0 mm² und mm² *. The crimping tool has an internal ratchet which opens only after the crimp process has been completed. With safety valve for automatic release when correct pressure is reached. Part number: * Table of adjustment and positioner see next page. Microsection hexagonal crimping Page 7

74 Assembly, Crimping Crimp information size ODU ROB Assembly, Crimping Termination cross-section Contact diameter Stripping length 8-point crimping tool Hexagonal crimping tool Setting Y Profile no. mm² AWG mm mm positioner Check gauge X 0.08/0. / /0.0 0/.0. // * //0 * 9 * Use only according to conductor design specifications! 0.7 Pos. position 0.7 Pos. position 0.9 Pos. position 0.9 Pos. position. Pos. position. Pos. position. Pos. position. Pos. position. Pos. position. Pos. position.8±0.0 Crimp information quick-change head Termination cross-section Contact diameter Stripping length 8-point crimping tool 8-point crimping tool termination area Setting Y positioner Position-no. contact holder mm² AWG mm mm to.0 8 to Pos. position.07 Pos. position. Pos. position. Pos. position. Pos. position Page 7

75 Assembly, Crimping Crimp information size Termination cross-section Contact diameter Stripping length 8-point crimping tool Hexagonal crimping tool Setting Y Profile no. positioner Check gauge X mm² AWG mm mm socket. pin Pos. position. Pos. position. Pos. position. Pos. position. Pos. position. Pos. positiong.8±0.0.±0.0 X ODU ROB Assembly, Crimping Y Check gauge (contact) for hexagonal crimping tools Adjustment dimension (tool) for 8-point crimping tools Page 7

76 Assembly, Crimping Crimp information size Termination cross-section Contact diameter Stripping length mm² AWG mm mm 8-point crimping tool * 8-point crimping tool Hexagonal crimping tool Hexagonal crimping tool Setting Y Setting Y Profile no. positioner positioner Check gauge X Positioning setting (socket/pe socket/pin) Check gauge X crimping jaws ODU ROB Assembly, Crimping 0.08 to to 0. 8/. 8. // * // * < Y < ( /.. / ) 0.90 < Y < ( /.. / ) ** ( /.. / 7) **.0 <Y < <Y < ( /.. / ). ( / 8 / ). ± 0.0. ( / 8 / ).8 ± ± 0.0. ± 0.0. ± ± * Use only according to conductor design specifications! ** Longitudinally watertight X Y Check gauge (contact) for hexagonal crimping tools Adjustment dimension (tool) for 8-point crimping tools Page 7

77 Assembly, Crimping Removal Tools for Crimp Contacts Removal of the already assembled contact (including cable) Contact Straight model Right-angle model Half-shells diameter mm Straight model Right-angle model Half-shells ODU ROB Assembly, Crimping Removal of the contact that has not yet been assembled Contact Straight model diameter mm Without cable may have to be cut. Tool for crimp contacts in the quick-change head version Contact Insertion tool Removal tool diameter mm. und Removal tool Insertion tool Page 77

78 For Your Notes ODU ROB Assembly, Crimping Page 78

79 Product Description ODU ROB Produkt Descr. ODU ROB Page 79

80 Product description ODU ROB ODU ROB Product Descr. ODU ROB Economical and simple assembly because the contacts lock into place with standard tools sizes Protection class: IP 7 Flammability class min. UL 9V-0 Additional reliability thanks to patented double-bellied lamella! Pilot contacts are possible Very good electric characteristics (Operating voltage up to 800 VAC) Cable exit can be rotated in any direction straight or right-angled cable exits are available Number of contact positions: + PE + pilot contacts Operating temperature: 0 C up to +0 C. Design The ODU ROB connection system consists of housing, insulator and contacts. In the crimp version, the contacts can be installed into and removed from the insulation body in a few seconds. The insulators and the housing can be screwed using commercially available hexagonal socket tools. Housing Contact insert Insulator Coding (optionally) Page 80

81 Product description ODU ROB Main application area for the ODU ROB The cable sets between the switch cabinet and the electrode holders, which in some cases are subjected to high mechanical loads, can be modularly constructed by using connectors. In case of damage, the tube packages can consequently be partially and quickly exchanged. ODU ROB is particularly suited to this purpose. The simple installation and flexible design make rapid setup or exchange possible and so reduce the operating costs. Produkt Descr. ODU ROB ODU LAMTAC (contacts with lamella technology) The lamella contact offers fewer contact surfaces than the ODU SPRINGTAC contact. One or more stamped lamellas are mounted in a turned carrier. Usually 0,000 mating cycles are possible. Unmated Socket Pin Advantages More than 0,000 mating cycles High current carrying capacity Low contact resistances Low insertion forces Secure contacting High resistance to vibrations and impacts Carrier Lamella Long life due to premium materials and surfaces Mated Many styles and termination types are on hand or feasible Socket Pin Economical alternative to springwire contacts. Page 8

82 Product description ODU ROB Order Information ODU ROB Housing, inserts and if applicable cable clamps must be ordered separately for the ODU ROB. Order example: ODU ROB, size 0 A, for wire mm², extra fine wire positions with earthing and pilot contacts Insulator with fixing screws Cable clamp. Socket piece Pin piece Product Descr. ODU ROB Housing Insert Contacts Pilot contacts Cable clamp Page 8

83 ODU ROB Size Up to max. A ODU ROB Size Page 8

84 ODU ROB Size ODU ROB Size, up to Max. A Technical data Operating frequency 0 up to 0 Hz Contact diameter mm Termination Crimp Designation A / 800 V / kv / Protection class IP 7 (coupled and screwed) The ODU ROB connection system consists of housing and inserts. The inserts are arranged of an insulator and contact pins. ODU ROB Size Housing for pin and socket piece Material: PBT, grey Straight and right-angled cable exit Straight or right-angled cable exit are possible with one and the same housing. Thanks to the patented two-piece housing, it takes only a few steps to change between straight and right-angled execution. Cable exit Part number Straigth and right-angled M. Straight cable exit M. Right-angled cable exit Page 8

85 ODU ROB Size Contact insert socket piece Picture without contacts Sealing plug Material Insulator Contacts PBT, blue Cu-alloy, surface Ag Order information socket insert in single parts Part number Current load Termination cross section Contact diameter A mm² mm Insulator with screws Insulator without screws X up to Socket contact X up to X up to X up to Sealing plug Pilot contact pin X = 0 Line according to VDE 09 extra fine class X = Line according to VDE 09 fine class Grey = on request! ODU ROB Size Order information socket insert as set Insulator with contacts and sealing plugs (conductor design extra fine) Insulator with contacts and pilot contacts (conductor design extra fine) Part number Current load Termination cross section Contact diameter A mm² mm Page 8

86 ODU ROB Size Contact inserts pin piece Material Insulator Contacts PBT, blue Cu-alloy, surface Ag ODU ROB Size Order information pin insert in single parts Part number Current load Termination cross section Contact diameter A mm² mm Insulator with screws Insulator without screws X up to Pin contact X up to X up to X up to Sealing plug Pilot contact socket X = 0 Line according to VDE 09 extra fine Class X = Line according to VDE 09 fine Class Grey = on request! Order information pin insert as set Insulator with contacts and sealing plugs (conductor design extra fine) Insulator with contacts and pilot contacts (conductor design extra fine) Part number Current load Termination cross section Contact diameter A mm² mm up to up to up to up to up to up to up to up to Page 8

87 ODU ROB Size Accessories Size on Request Assembly set for installation in metal sheet Part number: M ( ) Assembly instruction and possibilities see from page Assembly ring 0. Surface mounted housing with assembly ring Part number: PG Assembly bracket Part number: M ( ) ODU ROB Size.9 ( ) ( ) Page 87

88 ODU ROB Size Hexagonal keying Cable clamp M Part number: Material Cable diameter Colour up to mm grey Part number: white Part number: ODU ROB Size Page 88

89 ODU ROB Size Up to max. 80 A ODU ROB Size Page 89

90 ODU ROB Size ODU ROB Size up to Max. 80 A Technical data Operating frequency 0 up to 0 Hz Contact diameter 8 mm Termination Crimp Designation 80 A / 800 V / kv / Protection class IP 7 (coupled and screwed) The ODU ROB connection system consists of housing and inserts. The inserts are arranged of an insulator and contact pins. Housing for pin and socket piece Material: PBT, grey Straight and right-angled cable exit ODU ROB Size Straight or right-angled cable exit are possible with one and the same housing. Thanks to the patented two-piece housing, it takes only a few steps to change between straight and right-angled execution. Cable exit Part number Straight and right-angled M0. M0. Straight cable exit Right-angled cable exit Page 90

91 ODU ROB Size Contact inserts socket piece Picture with contacts. Material Insulator Contacts PBT, blue Cu-alloy, surface Ag Order information socket insert in single parts Part number Current load Termination cross section Contact diameter A mm² mm Insulator with screws Insulator without screws X up to 0 Socket contact X up to X up to X up to 80 0 Sealing plug Pilot contact pin X = 0 Line according to VDE 09 extra fine Class X = Line according to VDE 09 fine Class Grey = on request! ODU ROB Size Order information socket insert as set Insulator with contacts and sealing plugs (conductor design extra fine) Insulator with contacts and sealing plugs (conductor design extra fine) Part number Current load Termination cross section Contact diameter A mm² mm up to up to up to up to up to up to up to up to 80 0 Page 9

92 ODU ROB Size Contact inserts pin piece Material Insulator Contacts PBT, blue Cu-alloy, surface Ag ODU ROB Size Order information pin insert in single parts Part number Current load Termination cross section Contact diameter A mm² mm Insulator with screws Insulator without screws X up to 0 Pin contact X up to X up to X up to 80 0 Sealing plug Pilot contact socket X = 0 Line according to VDE 09 extra fine Class X = Line according to VDE 09 fine Class Grey = on request! Order information pin insert as set Insulator with contacts and sealing plugs (conductor design extra fine) Insulator with contacts an sealing plugs (conductor design extra fine) Part number Current load Termination cross section Contact diameter A mm² mm up to up to up to up to up to up to up to up to 80 0 Page 9

93 ODU ROB Size Accessories Size on Request Assembly set for installation in metal sheet Part number: M ( ) Assembly instruction and possibilities see from page 98. M ( ) 8 Assembly ring Mounting case with assembly ring Part number: M0. Assembly bracket Part number: M ( ) ODU ROB Size. ( ) ( ) Page 9

94 ODU ROB Size Hexagonal coding Cable clamp M 0 Part number: Material Cable diameter Colour 9 up to 8 mm white Part number: ODU ROB Size Page 9

95 ODU ROB Assembly Instruction and Crimp Information ODU ROB Assembly, Crimping Page 9

96 ODU ROB Assembly Assembly Instruction Size and. Lock crimped contacts into place in the insulator insert.. Slide equipped insert into the insulator and screw it down.. Slide front part of housing onto the insulator in the right position and select the required cable exit (straight or rightangle). Do this by rotating the rear part of the housing into the required position. Both cable exits are possible with one and the same housing. Screw down the housing parts correspondingly. ODU ROB Assembly, Crimping Page 9

97 ODU ROB Assembly Assembly Possibilities Size Surface mounted housing with assembly ring Connector socket angled Cable exit Assembly set for installation in metal sheet or cable to cable connection Cable exit Assembly bracket angled straight Cable exit gerade Cable exit Alternative to installation in metal sheet angled angled 90 ODU ROB Assembly, Crimping Cable exit Cable exit Cable exit Cable exit straight straight Page 97

98 ODU ROB Assembly Assembly Possibilities Size Surface mounted housing with assembly ring Connector socket angled Cable exit Assembly set for installation in metal sheet or cable to cable connection Cable exit Montagewinkel angled straight Cable exit gerade Cable exit ODU ROB Assembly, Crimping angled 90 Alternative to installation in metal sheet angled 90 Cable exit Cable exit Cable exit Cable exit straight straight Page 98

99 ODU ROB Crimp Information Crimping Tools Termination cross-section Contact diameter 8-point crimping tool Hexagonal crimping tool Crimp jaws Adjustment dimension X mm² mm.0 / / pilot contacts to. Grey = on request! 8-point crimping tool part number: Hexagonal crimping tool part number: ODU ROB Assembly, Crimping Page 99

100 For Your Notes ODU ROB Assembly, Crimping Page 00

101 Application Specific Connectors for Application Specific Systems Page 0

102 Application Specific Systems Additional Docking Connectors Modular rectangular connector The frames can be given a floating mounting and consequently automatically docked. There are versions with axial play of ± 0. mm and radial play of ±. mm. Modules are available for signals, power, high frequency, fibre-optic, pneumatic, media and shielded implementations / high-speed-connectors. Small docking connectors Docking connectors from the ODU MINI-SNAP series L Push-Pull product program can have an outer diameter from 9. to mm. The pin and groove coding makes incorrect mating almost impossible. Suitable for creating a docking connection between two devices (such as at a charging station) to 0 positions. Versions with IP 0 and IP 8 sealing of the end device are available. Application Specific Systems Page 0

103 Application Specific Systems Application Specific Docking Systems Application specific docking unit for AC/DC converter. Interface to the inverter. Application specific docking unit for electric cars. Application specific docking unit for electric cars. Application specific docking units for the Transrapid in Shanghai. Docking plate in magnetic resonance imaging (contacting of the gradient coil) with contact pins, diameter mm. Application Specific Systems Page 0

104 For Your Notes Application Specific Systems Page 0

105 Technical Information Technical Information Page 0

106 Technical Information International Protection (IP) Classes in Accordance with DIN EN 0 9 (or IEC 9 / VDE 070 T, respectively) Code letters (International Protection) IP First code number (Protection against solid foreign bodies) Second code number (Protection against water) Code number Extent of protection Code number Extent of protection 0 No protection No protection against contact, no protection against solid foreign bodies 0 No protection against water No protection against water Protection against large foreign bodies Protection against large-surface contact with the back of the hand, protection against foreign bodies 0 mm Protection against dripping water Protection against vertically falling water drops Protection against medium-sized foreign bodies Protection against contact with the fingers, protection against foreign bodies. mm Protection against dripping water when tilted Protection against falling water drops when tilted (any angle up to from the vertical) Protection against small foreign bodies Protection against contact with tools, wires, or the like with. mm, protection against foreign bodies. mm Protected against spraying water Protection against water spraying at any angle up to 0 from the vertical Protection against granular foreign bodies The same as, except mm Protection against splashing water Protection against splashing water from all directions Protection against dust deposits Protection against contact, protection against harmful dust deposit in the interior Protection against water jet Protection against water jet (nozzle) from any angle Protection against dust ingress Protection against foreign bodies mm, protection against dust ingress Protection against powerful water jet Protection against powerful water jet from any angle 7 Protection against immersion Protection against water ingress during temporary immersion 8 Protection against continuous immersion Protection against pressurized water during continuous immersion Technical Information 9k Protection against high pressure Protection against water from high-pressure/ steam jet cleaners. IP x9k is not included in EN 09 or IEC 09, but is included in DIN Page 0

107 Technical Information Explanations and Information in Compliance with VDE Standards applied DIN EN 0- (VDE 00 part ) and DIN EN 98 (VDE 07) (Original DIN EN 0- : 007 and DIN EN 98 : 009 remain authoritative for all technical information given). General information A connector cannot be chosen by taking into consideration only functionality, number of contacts and current or voltage characteristics. The consideration of the place where it will be used and the installation conditions that prevail there are essential. Depending on the installation conditions and local conditions, the connector can be used in different voltage and current ranges, according to the standardization. All voltage information listed in this catalog refers to use of insulators in ODU MAC massive frame for DIN housings or ODU MAC aluminium frames. The most important influencing quantities and the electrical characteristics tuned to them are explained in more detail in the following. If you have further questions, we would be happy to provide support. The following texts and tables are excerpts from the specified standards. The originals, DIN EN 0- from Nov. 00 and DIN EN 98 from Sep. 00, remain authoritative for all technical information given. Overvoltage category Using the overvoltage category, the necessary rated impulse voltage is defined according to table F. and the nominal voltage used. The particular overvoltage category for the device, depending on the installation location, is selected according to the criteria listed below. Overvoltage category I Devices for connection to electric circuits in which measures have been taken to limit transient overvoltages to a suitable low level. For example: Connectors for the power supply of computer hardware that is permanently connected to a power pack with electronic overvoltage limiting. Overvoltage category II Devices that consume energy and that are supplied from the fixed wiring system. For example: Household appliances, portable tools and similar devices. Overvoltage category III (= standard, if no special overvoltage category is given). Devices in fixed wiring systems and for those cases in which particular demands are placed on the reliability and availability of the devices. For example: Switches in fixed wiring systems and devices for industrial use with permanent connection to the fixed wiring system. Overvoltage category IV Devices for use at the wiring system connecting point. For example: Electric meters and primary overvoltage protective devices DIN EN 0-: Table F. Rated impulse voltage for devices that are fed directly from the low-voltage system. Nominal voltage of the electric power supply system Voltage line to neutral, Rated impulse voltage according to IEC 008 derived from nominal voltages a.c. or d.c. up to and including Overvoltage category Three-phase-system Single-phase-system I II III IV V V V V V V V ,00,00 0 to ,00,000 0/00 77/80 00,00,00,000,000 00/9 00,00,000,000 8,000,000,000,000,000 8,000,000 Technical Information Page 07

108 Technical Information Technical Information Pollution degree Combined with moisture, any pollution that may arise can influence the insulating property on the surface of the connector. For defining the different rated values, a pollution degree must be selected for the device, according to the criteria listed below. For a connector with a degree of protection of at least IP (to IEC 09), the insulating parts inside the encapsulation may be measured for a lower pollution degree according to the standard. This also applies to inserted connectors where the encapsulation is ensured by the connector housing and that are detached only for testing and maintenance purposes. Pollution degree There is either no pollution or only dry, non-conductive pollution; the pollution has no influence. For example: Measuring instruments and hardware in computer systems. Pollution degree Only non-conductive pollution occurs. Transient conductivity caused by dewfall must be expected occasionally, however. For example: Devices in laboratories and in living areas and sales and other commercial areas. Pollution degree (= standard, if no special pollution degree is given). Conductive pollution occurs or dry, non-conductive pollution that becomes conductive because of dewfall must be expected. For example: Devices in industrial, commercial and agricultural operations, unheated storage areas and workshops. Pollution degree Continuous conductivity occurs, caused by conductive dust, rain or wetness. For example: Devices in open-air plants and on construction machines. Operating voltage (VDE: Rated voltage) The level of a voltage that is specified by the manufacturer for a component, device or piece of equipment and to which the operating and performance parameters apply. The rated voltage depends on the connector s insulating material group and the respective creepage distances between the separate contacts, according to the specified pollution degree. By using empty modules and by differing the positioning of the contacts in the insulators, it is possible to influence the rated voltage considerably. Devices are permitted to have more than one value for the rated voltage or to have a range of rated voltages) (see table F. in DIN EN0-:007). Nominal voltage A suitable rounded voltage level, which is specified for a device by the manufacturer for labeling or identification. In these explanations, the term nominal voltage is used for the value of the output voltage specified by the power company or the manufacturer of the voltage source for classification of the overvoltage category. Rated impulse voltage Value of the impulse test voltage that is specified by the manufacturer for a device or a part thereof and that indicates the defined staying power of its accompanying insulation against transient (short-term, lasting a few milliseconds) overvoltages. The impulse test voltage here is the highest level of the impulse voltage of a defined shape and polarity that is not permitted to lead to any insulation disruptive discharge under defined conditions. The rated impulse voltage depends on the clearance distance between the separate contacts, according to the specified pollution degree. By using empty modules and by differing the positioning of the contacts in the insulators, it is possible to influence the rated impulse voltage considerably (see table F. in DIN EN0-:007). In the most recent version of DIN EN 0-:009, resources that are not connected directly to the low voltage supply should be designed for the minimum clearance distance according to the possible continuous voltage, the temporary overvoltages or the periodic peak voltage (see table F.7 in DIN EN 0-:007). Impulse test voltage / power-frequency test voltage Highest value of the impulse voltage of a defined shape and polarity that is not permitted to lead to any insulation disruptive discharge or sparkover under defined conditions. Page 08

109 Technical Information Clearance distance Shortest distance between two conductive parts, through the air. Creepage distance Shortest distance between two conductive parts, along the surface of an insulating material. The creepage distance is influenced by the pollution degree used. Test voltage The connector s electric strength is tested to the standard according to the specified rated impulse voltage by applying the test voltage (impulse test voltage or powerfrequency test voltage according to table F.) over a defined time period. DIN EN 0-: Table F. Test voltages for testing clearance distances at different altitudes (The voltage levels are valid only to verify the clearance distances) Rated impulse voltage Test impulse voltage At sea level (NN) at 00 m elevation at 00 m elevation û û û û kv kv kv kv Technical Information Page 09

110 Technical Information Conversions AWG Cross Section (AWG = American Wire Gauge) Technical Information The AWG system describes the cross section of a wire using a gauge number for every % increase in conductor cross section. With larger wire diameters, the AWG gauge numbers decrease; as the wire sizes increase, the AWG gauge numbers decrease. This is only valid for solid conductors. Most wires are made with stranded conductors. Compared to solid conductors stranded wires offer higher durability, higher flexibility and better performance under bending and vibration. Stranded wires are made from wires with smaller gauge sizes (higher AWG gauge number). The AWG gauge number of the stranded wire is equal to that of a solid conductor of the same size wire. The cross section of the stranded conductor is the sum of cross sections of the single conductors. For example, a AWG-0 stranded wire of 7 AWG-8 conductors has a cross section of 0. mm²; an AWG-0 stranded wire with 9 AWG- conductors has a cross section of 0. mm². Source: Gore & Associates, Pleinfeld Conversion table AWG/mm² Circular wire AWG Diameter Cross section Weight Max. resistance Inch mm mm² kg/km Ω/km 0 () (7/) () (9/) (7/8) () (9/7) (7/0) () (9/9) () (9/0) () (7/8) (9/) () (7/0) (9/) () (7/) (9/) () (7/) (9/8) () (7/) (9/0) () (7/8) (9/) () (7/0) (9/) () (7/) ,9.00 () ,9.00 (7/) ,.00 8 () , () ,878.0 () ,9.00 () ,0.00 Page 0

111 Technical Information Principles of Current Carrying Capacity Derating measurement procedure (DIN EN 0-- : 00) Structure of the basis current carrying capacity curve Upper limit temperature given by the materials t l t l t l Current I Ambient temperature t t t t A connector s current carrying capacity is determined by measurement. It is determined by taking into account the self-heating due to Joule heat and the ambient temperature, and is limited by the thermal properties of the contact materials used; the upper limit temperatures of these materials should not be exceeded. The relationship between current, the temperature increase caused as a result of the power dissipation at the contact resistor and the ambient temperature is depicted in a curve. The curve is drawn in a linear coordinate system with the current I as the ordinate and the temperature t as the abscissa. The upper limit temperature is used as a limit for the diagram. In three measurements, the temperature rise due to Joule heat (Δt) is determined at different currents in at least three connectors and the points determined in this process are connected into a parabolic basis curve. The corrected current carrying capacity curve (derating curve) can be derived from the basis curve. The safety factor (0.8 I n ) can be used to give consideration to such values as manufacturing tolerances as well as uncertainties in the temperature measurement and in the measurement setup. Technical Information Page

112 Technical Information Current Load The heating in multi-position connectors and cables is greater than the heating in single contacts. A reduction factor is therefore used in the calculation. There is no direct regulation for connectors in this regard. For this reason, the reduction factors for multi-wire cables as given in DIN 7 98 Part / VDE 098 Part are used. The reduction factor applies for or more loaded wires (cf. also DIN 0, Part ). The nominal current is the current intensity that leads to a contact temperature increase of K in a contact. Nominal current refers to individually loaded contacts. Example A cable with wires ( positions) is used. The nominal cross-section of a wire is mm². A reduction factor (e.g. cable laid in air) of 0. is to be applied for the load reduction depending on the number of loaded cable wires. According to the current carrying capacity, a mm² Cu line can be used for amperes. The positions cable can accordingly be loaded with a max. 7. A/wire (0. A). Technical information / application examples Example: Termination cross-sections The current load curve for the contact diameter mm refers to a termination cross-section of mm². If the contact ( mm) is connected to a cable with a crosssection of. mm², the max. permissible current intensity is limited by the conductor. To determine the max. permissible current intensity, a smaller contact with corresponding cross-section is then selected. Reduction factors Multi-wire cable with the conductor cross-sections from. to 0 mm² when laid in air. Cable in air Reduction factors Number of loaded wires Load reduction factors For plastic cable from. to 0 mm² when laid in air. Number of loaded wires Reduction factors Contact mm with mm² = max. nominal single contact current load 0 A Contact mm with. mm² (with mm) = max. nominal single contact current load 0 A Technical Information Page

113 Technical Information Line Current Load Laid Exposed in air Or on surfaces Single-wire lines Multi-wire highly flexible lines Multi-wire movable lines PVC, PE, PUR, TPE heat resistant for hand-held devices, wire/sheath cold-resistant, PVC insulated standard program harmonized series Number of loaded wires or Nominal cross-section of copper Current load in A conductor in mm² Current load according to DIN VDE 000 T group following the principles of HDST. based on H0VV-F VDE 08 DIN VDE 000T 98-0 group DIN VDE 098 T table 9 Permissible loads on insulated lines up to 0 C Ambient temperature following the principles of VDE 000 part, 098 part and 089 part. Current load, flexible lines with nominal voltages up to,000 V at ambient temperature +0 C. Technical Information Page

114 Technical Information Technical Terms / Definitions / Information Technical Information Basis curve for / ODU ROB Current carrying capacity curve for connectors as determined by measurement according to the measurement procedure described in DIN EN 0--:00 depending on the permissible limit temperature of the materials. Clearance distance The shortest distance, measured as a thread measure, between two live metallic parts in the air. Connector = / ODU ROB A component that allows the connection of electrical conductors and that is intended to set up connections to a suitable mating component and/or to such separate connections. Connectors are operating materials that are not permitted to be inserted or separated when used as intended (when energized or loaded). The connector consists of the connector housing and the contact element. Connectors, fixed (receptacles) Are intended for attachment to racks, slide-in modules, devices or walls. Connectors, loose (plugs) Are intended for attachment to free ends of moving lines and cables. Contact resistance Total resistance from termination to termination. The contact resistance here is considerably less than the volume resistance. The values given are average values. Creepage distances Shortest distances between live parts on the surface of insulation bodies. All elevations and depressions in the insulation body are taken into account as far as specified minimum dimensions are available. Crimp area The area of the crimp barrel in which the crimp connection is made by compressive deformation or compressive forming of the sleeve around the conductor. Current carrying capacity (nominal current and max. continuous current) The information refers to sufficiently dimensioned connection cable in accordance with DIN VDE 09 (DIN EN 08) in class, so that no stronger temperature increase is caused from here. The specified temperature increase takes place through the contact. The information provided refers to average values. Derating curve The corrected current carrying capacity curve, derived from the established basis curve (0.8 x measured current). It takes into consideration production spreads as well as uncertainties in the temperature measurement and the measurement setup. Derating measurement procedure (DIN EN 0--) Measurement procedure for determining the current carrying capacity of connectors, taking the maximum permissible limit temperature into consideration. Insertion or withdrawal force Force that, without the influence of a coupling or locking device, is required for completely inserting or withdrawing pluggable components. Insulator Part of a connector, usually identical to the contact carrier. Lubrication The contacts are pre-lubricated at the factory. Mating cycles Mechanical activation of connectors and plug-and-socket devices by insertion and withdrawal. A mating cycle consists of an insertion and withdrawal step. Max. continuous current The metrologically determined current intensity at room temperature (approx. 0 C) that leads to a rise in the contact temperature to the limit temperature. Nominal current The metrologically determined current intensity that leads to an increase of Kelvin in the contact temperature. The nominal current is determined according to the derating measurement procedure (DIN EN 0-- :00). The information refers to the basis curve. Nominal single contact current load The current carrying capacity with which each single contact can be separately loaded. Nominal voltage The voltage stated for a connector by the manufacturer; this is used as a reference for the operating and performance characteristics. Operating temperature for the / ODU ROB 0 C to +00 C ( 0 to F). Operating voltage The nominal voltage of the current source for which the connector is intended for use. The operating voltage is not permitted to be greater than the connectors nominal voltage. Plug device Operating materials that are permitted to be inserted or separated during the intended use (when energized or electrically charged). Rated current (IEC 98) The metrologically determined current intensity that leads to an increase of Kelvin in the contact Page

115 Technical Information temperature. The current is determined according to the derating measurement procedure (DIN EN 0-- :00) and is derived from the basis curve Rated voltage The voltage according to which the connectors are dimensioned and to which the particular operating properties are related. Reference voltage The standardized voltage (VDE 00 or DIN EN 0-) for which a connectors insulation is dimensioned. Solder connections Termination technology in which a melted added metal (solder), whose melting temperature is less than that of the base metals to be connected, is used to join two metallic materials. Surge current One-time power pulse current with a load period of 0 ms. Termination cross-section The specified cross-sections correspond to DIN VDE 09 (DIN EN 08) Class. Termination technologies Methods for connecting the lines to the electro-mechanical components, such as solderless connections in accordance with DIN EN 0: crimp, press-fit connection, etc. or solder connection. Test voltage The voltage that a connector can withstand under defined conditions without disruptive discharge or sparkover. Wire Conductor with its insulation, including any guiding layers that may be present. Cables or lines can have one or more wires. Suitable safety precautions must be taken in order to ensure that personnel do not come into contact with live conductors during installation and operation. All entries were reviewed with maximum care before this catalogue was printed. ODU reserves the right to make changes in accordance with the current state of the art without advance notice, and without being obligated to provide replacement deliveries or to continue production of older designs. Technical Information Page

116 For Your Notes Technical Information Page

117 Company Information Page 7 Company Information

118 Quality Management ODU has had a powerful quality management system in place for years. ODU has been successfully certified to ISO 900 since 99. In addition, the automotive sector of the company group is certified to ISO TS 99. The certification process was carried out by the internationally active BVQI (Bureau Veritas Certification) company. ODU is also certified according to the medical standard ISO 8 : 00 + AC : 007. Additional to this ODU is certificated to DIN EN ISO 00 : 009 as well as to different certifications: VDE, UL, UL wiring harness, SCA, VG, MIL. Company Information Page 8

119 Your Partner in Many Application Areas MEDICAL ODU stands for quality, flexibility and reliability. This is why customers working in many application areas rely on ODU products in markets such as the following: INDUSTRIAL Medical Industrial Measuring and testing Military and security Energy Automotive. MEASURING AND TESTING MILITARY AND SECURITY ENERGY AUTOMOTIVE Page 9 Company Information

120 The Complete ODU Product Range Single contacts (round or flat) High current connectors Circular connectors with Push-Pull locking Modular rectangular connectors PCB connectors Robust connectors Disposable Systems Application specific solutions AMC Advanced Military Connector Cable assembly Company Information Page 0

121 Everything From One Source Each connection needs its individual cable. Make no compromises when it comes to the quality of the complete connection system. ODU gives you the complete system solution from one source, with no intermediary suppliers. Cable assembly is a very complex subject. It requires equal measures of expertise in the areas of connectors, cables and assembly. ODU meets all these requirements in full. Our competent assembly team tests the complete system according your specifications. Our assembly service promises you the same quality found in our connectors without compromises. ODU offers you all from one source 00 % final inspections Production in clean room acc. to EN ISO- possible Automatic processes (cutting, stripping, attaching) Extrusion possible with a hot-melt and high pressure/ temperature process Ultrasound welding EMC compatible assembly Application specific labeling Widest range of potting possibilities for sealed systems Extruded cable crossovers. Advantages for the customer Modern manufacturing facilities in Mühldorf (Germany), Shanghai (China) and Sibiu (Romania) Reliability thanks to our company-wide quality strategy Products with durability and functional reliability Production according to UL (file: E) possible Inspections, such as crimp force monitoring, during production. Page Company Information

122 Application Specific Connectors Innovative, dynamic markets call for innovative connectors. As an expert for special applications and requirements, we develop forward-looking, appropriate connectors attuned to your needs! In spite of the global trend toward standardized connectors, there are always applications that call for an application specific solution. We accept this challenge and develop innovative products for our customers based on our many years of extensive know-how, our creativity and, not least, our high level of vertical integration. Technology access and technology mastery, combined with intensive cooperation with the user, form the basis for achieving success together. Design-to-cost is joined by design-for-application for the customer s benefit. Company Information Page

123 For Your Notes Page Company Information

124 ODU Worldwide ODU GmbH & Co. KG Pregelstr. 8 Mühldorf a. Inn Germany Phone: Fax: zentral@odu.de ODU France Phone: odu@odu.fr ODU Scandinavia Phone: sales@odu.se ODU UK Phone: sales@odu-uk.co.uk ODU USA Phone: sales@odu-usa.com ODU Shanghai Trading Phone: oduchina@odu.com.cn Stand: 0/0 78e-Katalog-Andocksysteme Design: KOMMA Werbeagentur GmbH Other qualified representatives shown on our website: /sales

Modular Connector System with High Power, Signal, Fibre-Optic, Coaxial Contacts and Pneumatic Valves

Modular Connector System with High Power, Signal, Fibre-Optic, Coaxial Contacts and Pneumatic Valves Modular Connector System with High Power, Signal, Fibre-Optic, Coaxial Contacts and Pneumatic Valves 2 rue René Laennec 51500 Taissy France Fax: 03 26 85 19 08, Tel : 03 26 82 49 29 E-mail:hvssystem@hvssystem.com

More information

ODU MAC LC. Modular Attachable Connector System

ODU MAC LC. Modular Attachable Connector System Catalogue No. 1004 LC-a ODU MAC LC Modular Attachable Connector System ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr. 11, 84453 Mühldorf a. Inn, Germany Phone: +49/ 86 31/61 56-0, Fax: +49/ 86 31/61

More information

D-Sub SEaled subminiature D connectors, 2.54 mm pitch

D-Sub SEaled subminiature D connectors, 2.54 mm pitch SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with

More information

Han PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module

Han PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module Han termination Contents Page Han-Fast Lock... 20.11 adapter for Han DD... 20.13 adapter for Han DDD module... 20.16 adapter for Han 40 A Axial module... 20.18 adapter for Han E... 20.20 adapter for Han

More information

Han R 23. Circular Connector. Certified acc. to DIN EN ISO 9001 in design/ development, production, installation and servicing.

Han R 23. Circular Connector. Certified acc. to DIN EN ISO 9001 in design/ development, production, installation and servicing. Circular Connector Certified acc to DIN EN ISO 9001 in design/ development, production, installation and servicing Data Sheet 0039-4 Circular Connectors Features Size R 23 Outer diameter 26 mm High contact

More information

EPIC LS1 Series Circular Power & Mixed Power Connectors

EPIC LS1 Series Circular Power & Mixed Power Connectors EPIC LS1 Series Circular Power & Mixed Power Connectors EPIC LS1 Circular and Mixed Power Connectors are designed to DIN specification EN61984 and have a standard M23 threaded connection housing. They

More information

ODU MINI-SNAP PC Product Description. ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic

ODU MINI-SNAP PC Product Description. ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic ODU MINI-SNAP PC Product Description ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic Cylindrical Connectors are generally available with several locking mechanisms: The most frequently

More information

EPIC Circular Connectors CIRCON M23 Series

EPIC Circular Connectors CIRCON M23 Series The M3 connectors have many inherent features which offer application advantages and provide significant benefits for the customer. These features make it one of the most application friendly connectors

More information

ODU-MAC. Modular Connector System with High Power, Signal, Coaxial and fiber optic contacts, pneumatic modules

ODU-MAC. Modular Connector System with High Power, Signal, Coaxial and fiber optic contacts, pneumatic modules Catalogue No. 100-c ODU-MAC Modular Connector System with High Power, Signal, Coaxial and fiber optic contacts, pneumatic modules ODU-Steckverbindungssysteme GmbH & Co. KG, Pregelstraße 11, D-85 Mühldorf/Inn

More information

Technical data: Pin Spacing

Technical data: Pin Spacing 282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,

More information

M23 Connectors and cables

M23 Connectors and cables Contents Product Description: SAI M23 Connectors.2 Contact assignment.7 Technical data.8 Overview.10 M23 connector for signal transmission.12 M23 connector for power transmission.18 Moulded M23 cables.22

More information

Applications

Applications Han PCB adapter Contents Page Technical characteristics PCB adapter for Han DD... 20.02 Han DD Inserts with PCB adapter... 20.03 Technical characteristics PCB adapter for Han E... 20.04 Han E Inserts with

More information

09. DIN Connectors

09. DIN Connectors . Connectors Connectors that comply with have been in use for years for both board-to-board applications and cable-to-board applications. Their robustness and universality are legendary. The classic signal

More information

Han-Brid. Contents Han-Brid Features Han-Brid Data interfaces Han-Brid Overview Han-Brid Cu

Han-Brid. Contents Han-Brid Features Han-Brid Data interfaces Han-Brid Overview Han-Brid Cu Contents Page Features... 19.02 Data interfaces... 19.03 Overview... 19.04 Cu... 19.06 F.O.... 19.08 Quintax 3 A... 19.10 RJ45 C... 19.12 USB / FireWire... 19.14 Han 4 A SC... 19.16 Hoods/Housings... 19.18

More information

07. har-link INTERFACE CONNECTORS

07. har-link INTERFACE CONNECTORS . INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism

More information

IP68 Sealed - Mini USB Buccaneer

IP68 Sealed - Mini USB Buccaneer IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB

More information

Details of the Han-Terminal block connector Han D AV Han D AV Distributor Han E AV Han ES AV

Details of the Han-Terminal block connector Han D AV Han D AV Distributor Han E AV Han ES AV Contents -Terminal Block Connectors Page Details of the -Terminal block connector........................ 08.02 D................................................... 08.10 D Distributor...........................................

More information

07. har-link Interface Connectors

07. har-link Interface Connectors . Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism

More information

09. DIN CONNECTORS

09. DIN CONNECTORS . 41 612 CONNECTORS Connectors that comply with 41 612 have been in use for years for both board-to-board applications and cable-to-board applications. Their robustness and universality are legendary.

More information

High-density multi-pin connectors

High-density multi-pin connectors High-density multi-pin connectors Mating and mounting conditions to DIN 41612/IEC 60603-2 General With the ever increasing miniaturization and higher packaging densities in highly integrated circuits there

More information

VMEbus systems System description Technical characteristics System description

VMEbus systems System description Technical characteristics System description Directory chapter 06 / inverse Page VMEbus systems................................................ 06.02 System description.............................................. 06.03 Technical characteristics..........................................

More information

v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc.

v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc. v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc. JAE JL10 Series Circular Waterproof Connector Application Examples Industrial machineries Servo

More information

Ringlock is a range of robust circular

Ringlock is a range of robust circular Connectors is a range of robust circular connectors for industrial applications. It uses a metal bayonet coupling system for quick and reliable connections and thermoplastic bodies for low installed cost.

More information

Small Circular Connector. JN1/JN2 Series. Cap

Small Circular Connector. JN1/JN2 Series. Cap COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Small Circular Connector JN1/JN2 Series CONNECTOR MB-0054-10 June 2012 Angle Plug [JN1] [JN2] [JN1] [JN2] Straight Plug Cable Connecting Individual Plug

More information

07. har-link Interface Connectors

07. har-link Interface Connectors . Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism

More information

Summary of shell housings and accessories Shell housing A Shell housing D EMC housing

Summary of shell housings and accessories Shell housing A Shell housing D EMC housing Directory chapter 20 Page Summary of shell and accessories........................... 20.02 housing C.......................... 20.04 housing A................................................. 20.08 housing

More information

Extract from new. Device Connectivity catalogue. HARTING har-flex. People Power Partnership

Extract from new. Device Connectivity catalogue. HARTING har-flex. People Power Partnership Extract from new Device Connectivity catalogue HARTING har-flex People Power Partnership . har-flex CONNECTORS The continuous scalability by an even number of contacts, i.e. from 6 to 100, of the HARTING

More information

Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High

Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical

More information

SUNCLIX Connection technology for photovoltaics

SUNCLIX Connection technology for photovoltaics SUNCLIX Connection technology for photovoltaics Connection technology for photovoltaics Are you looking for innovative and reliable connection technology for your PV modules, inverters or the complete

More information

UTS UTS. UTS provides a connection that performs faster, easier, safer and more reliable, it makes :

UTS UTS. UTS provides a connection that performs faster, easier, safer and more reliable, it makes : Company Profile UTS Contents Company profile... 2 Contents... 3 Description... 3 Overview TRIM TRIO... 4 Major features & benefits 5-9 Contact styles... 5 Rapid and secure locking system... 6 Rapid and

More information

Directory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch

Directory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch F Directory chapter 05 D-Sub Filter subminiature D connectors, 2.54 mm pitch New Page General information.............................................. 05.02 Technical characteristics..........................................

More information

Industrial Ethernet Panel-Mount Adaptors for PROFINET or EtherNet/IP Applications

Industrial Ethernet Panel-Mount Adaptors for PROFINET or EtherNet/IP Applications Industrial Ethernet Panel-Mount Adaptors for PROFINET or EtherNet/IP Applications Type 0981 ENC 100 RJ45/M12 adaptor, female receptacle connector M12, D coding, chassis side thread PG 9, RJ45 female connector,

More information

02. PushPull CONNECTORS

02. PushPull CONNECTORS . CONNECTORS A distributed automation system does not contain any central automated control cabinets. Controls, sensors and actuators are designed for a high degree of protection (IP 65 / IP 67) and are

More information

400 Series - Mini USB Buccaneer

400 Series - Mini USB Buccaneer IP68 Sealed IP68 rated IP69K, Tested in accordance with DIN 40050/Part 9 IP6k9k USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof

More information

Data sheet. OMNIMATE Signal - series B2L/S2L row S2L-SMT 3.50/08/180G 3.5SN BK BX

Data sheet. OMNIMATE Signal - series B2L/S2L row S2L-SMT 3.50/08/180G 3.5SN BK BX OMNIMATE Signal - series /S2L 3.50-2-row High-temperature-resistant, straight, 2-tier male connector for all common soldering methods. Optimised for automatic assembly. Packed in box or tape. 3.2 mm solder

More information

Section 2. Connectors Field attachable

Section 2. Connectors Field attachable E L E C T R O N I C C O N N E C T O R S Section 2 Connectors Field attachable 89 SAL M8x1 Connectors Field attachable Nomenclature S A L - 8 - R K W C 4 - L 5,5 SAL Sensor Actor Line Installation size

More information

Connector series UIC 558 VE R115. F 120.en

Connector series UIC 558 VE R115. F 120.en Connector series UIC 558 VE R115 4 52 F 0.en UIC 558 VE series connector The connector complies with the requirements of UIC 558 VE (up to 1994: UIC 58 VE). It connects lines used for the: remote control

More information

M12 connector D-coding M12 connector X-coding RJ45 IP20 connector PushPull RJ45 IP65 / IP67 connector

M12 connector D-coding M12 connector X-coding RJ45 IP20 connector PushPull RJ45 IP65 / IP67 connector M12 connectors Directory Chapter Page General information....02 M12 connector D-coding....06 M12 connector X-coding....20 RJ45 IP20 connector....27 PushPull RJ45 IP65 / IP67 connector....46 Han 3 A RJ45

More information

fischer connectors 4032 Series HIGH-PERFORMANCE IN A VERSATILE PACKAGE MEDICAL PORTABLE EQUIPMENT DATA ACQUISITION INSTRUMENTATION Edition 1.

fischer connectors 4032 Series HIGH-PERFORMANCE IN A VERSATILE PACKAGE MEDICAL PORTABLE EQUIPMENT DATA ACQUISITION INSTRUMENTATION Edition 1. fischer connectors 4032 Series Plastic connectors Edition 1.2 MEDICAL PORTABLE EQUIPMENT DATA ACQUISITION HIGH-PERFORMANCE IN A VERSATILE PACKAGE INSTRUMENTATION PERFECT PACKAGE www.fischerconnectors.com

More information

Connectors. product catalog no. 26

Connectors. product catalog no. 26 Connectors product catalog no. 26 ept GmbH I Tel. +49 (0) 88 61 / 25 01 0 I Fax +49 (0) 88 61 / 55 07 I E-Mail sales@ept.de I www.ept.de Product Groups Overview Explanation of Symbols Termination Application

More information

Connector System for Fluorescent Lighting Fixtures. Connectors for In-Line Mounting of Fluorescent Lighting Fixtures. Fully Polarized Connectors

Connector System for Fluorescent Lighting Fixtures. Connectors for In-Line Mounting of Fluorescent Lighting Fixtures. Fully Polarized Connectors Connector System for Fluorescent Lighting Fixtures Connectors for In-Line Mounting of Fluorescent Lighting Fixtures Fully Polarized Connectors Luminaire Disconnect Connectors Pluggable Lighting Connectors

More information

Electrical Components Catalog Universal MATE-N-LOK Connector System

Electrical Components Catalog Universal MATE-N-LOK Connector System Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation

More information

02. PushPull CONNECTORS

02. PushPull CONNECTORS . CONNECTORS A distributed automation system does not contain any central automated control cabinets. Controls, sensors and actuators are designed for a high degree of protection (IP 65 / IP 67) and are

More information

Switches and Indicators 84

Switches and Indicators 84 Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories

More information

400 Series Buccaneer BUCCANEER FOR POWER. IP68 rating tested at 1.054kg/sq cm (15lb/sq in) 10m depth for 2 weeks

400 Series Buccaneer BUCCANEER FOR POWER. IP68 rating tested at 1.054kg/sq cm (15lb/sq in) 10m depth for 2 weeks IP68 rating tested at 1.054kg/sq cm (15lb/sq in) m depth for 2 weeks IP69K, Tested in accordance with DIN 40050/Part 9 IP6k9k 2 and 3 pole -, 250V rating 4, 6 and 8 pole -, 125V rating and 12 pole -, 50V

More information

M12 Field Wireable Connectors. M12 CAT.6A Field Wireable Connectors. M12 Field Wireable Connectors for PROFINET

M12 Field Wireable Connectors. M12 CAT.6A Field Wireable Connectors. M12 Field Wireable Connectors for PROFINET M12 Connectors Application Advantage Shielded design ETHERLINE Ethernet Cable, Connectors & Tools M12 Field Wireable Connectors Male Female Temperature Range: Max. 85 C Nominal Voltage: Nominal Current:

More information

FISCHER MINIMAX TM SERIES

FISCHER MINIMAX TM SERIES TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases

More information

Right angle press-fit D-Sub connectors

Right angle press-fit D-Sub connectors Right angle press-fit D-Sub connectors Version in Standard and in Eurostyle General The new generation of right angle D-Sub connectors with press-fit termination of the TMC series are according to DIN

More information

1-Conductor Female Connector with Levers Pin Spacing: mm MCS MAXI 16

1-Conductor Female Connector with Levers Pin Spacing: mm MCS MAXI 16 -Conductor Female Connector with evers Pin Spacing: 0.6 mm MCS MAXI 6 Intuitive and tool-free lever actuation Universal connection for all conductor types Push-in termination of solid or ferruled conductors

More information

ODU MAC. Modular Connector System with High Power, Signal, Coaxial and fiber optic contacts, pneumatic modules

ODU MAC. Modular Connector System with High Power, Signal, Coaxial and fiber optic contacts, pneumatic modules Catalogue No. 1004-d ODU MAC Modular Connector System with High Power, Signal, Coaxial and fiber optic contacts, pneumatic modules ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstraße 11, D-84453 Mühldorf/Inn

More information

V.35 - Interface connectors

V.35 - Interface connectors V.35 DTE/DCE Interface connectors Description The Telecommunications Standardization Sector TSS V.35, formerly CCITT V.35 is the international standard termed Data Transmission at 48 Kbps using 60-108

More information

26-polige. Contacts Signalsteckverbinder. Circular Connectors

26-polige. Contacts Signalsteckverbinder. Circular Connectors 26-polige Contacts Signalsteckverbinder Circular Connectors 41 Ordering information 26 CONTCTS signal circular connectors ll standard connectors are published in this catalog. However, this catalog does

More information

Miniaturised pressure sensor Model M-10, standard version Model M-11, version with flush diaphragm

Miniaturised pressure sensor Model M-10, standard version Model M-11, version with flush diaphragm Electronic pressure measurement Miniaturised pressure sensor Model M-10, standard version Model M-11, version with flush diaphragm WIKA data sheet PE 81.25 for further approvals see page 5 MicroTronic

More information

Connector System for Circular Contacts

Connector System for Circular Contacts Connector System for Circular Contacts Introduction The diameter 1.5 mm and diameter 2.5 mm Connector System is designed for electronic and electrical applications in motor vehicles. It fullfils all requirements

More information

Better all-round. DataVoice Circular connectors STX M12x1 IP67 Connector series for industrial applications. PoE+ 10 GBE. coded.

Better all-round. DataVoice Circular connectors STX M12x1 IP67 Connector series for industrial applications. PoE+ 10 GBE. coded. Better all-round. X coded D coded 10 GBE PoE+ DataVoice Circular connectors STX M12x1 IP67 Connector series for industrial applications STX M12x1 IP67 connector series With the STX M12x1 IP67 connector

More information

revos revos Industrial Multipole Connectors

revos revos Industrial Multipole Connectors revos revos Industrial Multipole Connectors Catalog 2018 revos MINI Plant II, Rodezstraße in Bamberg Company headquarters in Bamberg STOCKO main plant in Wuppertal Solutions for Building technology AT

More information

For situations susceptible to interference and safety-related applications

For situations susceptible to interference and safety-related applications IEC 60947-5-2 Product description Multi-pole shielded circular connectors. Design according to DIN 43651, all-metal construction, used for control and measurement systems. Connection of shielded cables

More information

RJF TV Ethernet Connection System for Harsh Environment

RJF TV Ethernet Connection System for Harsh Environment RJF TV Ethernet Connection System for Harsh Environment ROHS compliant N & BZ RJFTV allows you to use an Ethernet Class D / Cat. 5e connection for 10 BaseT, 100 BaseTx or 1000 BaseT networks in harsh environments.

More information

8WH5 Combination Plug-In Terminals

8WH5 Combination Plug-In Terminals 8WH Combination Plug-In Terminals /2 Introduction / 8WH through-type terminals 1) /7 8WH hybrid through-type terminals with ipo connection /8 8WH9 plugs 1) 1) Also available as a PE version More technical

More information

M 12 POWER THE COMPACT AND POWERFUL M 12 CONNECTOR

M 12 POWER THE COMPACT AND POWERFUL M 12 CONNECTOR M 12 POWER THE COMPACT AND POWERFUL M 12 CONNECTOR 2 HUMMEL smart & reliable HUMMEL AG is a renowned manufacturer of connection technology and components for electric, electronic and heating areas. The

More information

SBE 80 / SBO 60 Connectors - up to 80 Amps

SBE 80 / SBO 60 Connectors - up to 80 Amps Connectors - up to 80 Amps SBE and SBO connectors build on the capability of the two pole SB connectors by offering up to 8 auxiliary power / signal contacts along with an IEC 60950 touch safe housing.

More information

Datasheet. Datasheet-No Type: RS(W)T(S) - RK(W)T(S) -.../ M. Page: 1 of 7

Datasheet. Datasheet-No Type: RS(W)T(S) - RK(W)T(S) -.../ M. Page: 1 of 7 The information/details in this datasheet merely contain general descriptions or performance factors which, when applied in an actual situation, do not always correspond with the described form, and may

More information

Technical Data, 4-way High Voltage. Cannon APD / ISO Connectors. Electrical Data. Mechanical Data. Materials List

Technical Data, 4-way High Voltage. Cannon APD / ISO Connectors. Electrical Data. Mechanical Data. Materials List Technical Data, 4-way High Voltage APD 4-way connectors are the original DIN72585 (now ISO 15170) versions using a 2,5 mm contact system. Designed for automotive applications they also meet the requirements

More information

High-density multi-pin connectors

High-density multi-pin connectors High-density multi-pin connectors Mating and mounting conditions to DIN 41612/IEC 60603-2 General With the ever increasing miniaturization and higher packaging densities in highly integrated circuits there

More information

ODU-MAC A PERFECT ALLIANCE. MANUAL MATING AUTOMATIC DOCKING SHORT OVERVIEW

ODU-MAC A PERFECT ALLIANCE. MANUAL MATING AUTOMATIC DOCKING SHORT OVERVIEW A PERFECT ALLIANCE. ODU-MAC A new performance class. Up to 2,00 V, 2 bar, 0 Gbit/s, > 0,000 mating cycles and 4.0 GHz. MANUAL MATING AUTOMATIC DOCKING SHORT OVERVIEW ODU-MAC BLUE-LINE ODU-MAC SILVER-LINE

More information

Product Overview Automation

Product Overview Automation EN DE Product Overview Automation Automation at a glance Ident Systems CIS3 CIS3A CIS3A - Mini Read system Read/write system Read system Read/write system Read system Read/write system Head Evaluation

More information

6000 Series Buccaneer. 30 twist locking Tamperproof lock prevents accidental un-mating. Cat 5e shielded coupler Maintains shielding

6000 Series Buccaneer. 30 twist locking Tamperproof lock prevents accidental un-mating. Cat 5e shielded coupler Maintains shielding circular connectors that combine the ease of use of a push/pull coupling mechanism with proven environmental sealing. Available with metal or plastic bodies, the range supports both data (USB and Ethernet),

More information

Data sheet. HDC insert HDC HQ 7 FC

Data sheet. HDC insert HDC HQ 7 FC The HQ series - big features in a compact design The electrical values speak for themselves. The standard HE crimp contacts can also be used here. The wire connection level is designed as a crimp contact

More information

ITS-Z0344 Half Pitch Interface Connectors

ITS-Z0344 Half Pitch Interface Connectors All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.

More information

ODU-MAC A PERFECT ALLIANCE. MANUAL MATING AUTOMATIC DOCKING SHORT OVERVIEW

ODU-MAC A PERFECT ALLIANCE. MANUAL MATING AUTOMATIC DOCKING SHORT OVERVIEW A PERFECT ALLIANCE. ODU-MAC A new performance class. Up to 2,00 V, 2 bar, 0 Gbit/s, > 0,000 mating cycles and 4.0 GHz. MANUAL MATING AUTOMATIC DOCKING SHORT OVERVIEW ODU-MAC BLUE-LINE ODU-MAC SILVER-LINE

More information

Electrical Interconnection

Electrical Interconnection Electrical Interconnection Edition 208/ Rail-Mount Terminal Block Systems Full Line Catalog, Volume Edition 207/208 PCB Terminal Blocks and Connectors Full Line Catalog, Volume 2 Edition 207/208 2 Automation

More information

Powermate Range pitch 10.16

Powermate Range pitch 10.16 Contents owermate Range pitch.16 owermate Range pitch.16 owermate Range pitch.16 Male connectors with solder connection.2 Socket connectors with clamping yoke connection.8.1 owermate Range pitch.16 SU.16/9

More information

D-Series High Reliability Circular Connectors

D-Series High Reliability Circular Connectors D-Series High Reliability Circular Connectors Technology Company, Inc. integramate D-Series Circular Connectors QA Technology integramate D-Series Connectors are high quality, plastic circular connectors

More information

Round Water-resistant Connectors (M12) XS2

Round Water-resistant Connectors (M12) XS2 Round Water-resistant Connectors (M) XS Water- and Environment-resistive FA Connectors Save Wiring and Maintenance Effort Compact FA connectors satisfy IP67 requirements and ensure a 9V-0 fire retardant

More information

Series 801 Mighty Mouse Double-Start ACME Thread Plug

Series 801 Mighty Mouse Double-Start ACME Thread Plug Series 0 Mighty Mouse ouble-start ACME Thread Plug 0-00 and 0-00 Ordering Information Series 0 Series 0 Mighty Mouse Connector features a double-start modified stub ACME mating thread for improved protection

More information

Standard Buccaneer BUCCANEER FOR POWER

Standard Buccaneer BUCCANEER FOR POWER IP8 rating tested at 1.05kg/sq cm (15lb/sq in) 10m depth for weeks and.8kg/sq cm (10lb/sq in) 100m depth for hours IPK, Tested in accordance with DIN 0050/Part IPkk Water and dustproof to IP8 when mated,,,,,,

More information

Supplementary instructions. Plug connector Harting HAN 8D. for continuously measuring sensors. Document ID: 30376

Supplementary instructions. Plug connector Harting HAN 8D. for continuously measuring sensors. Document ID: 30376 Supplementary instructions Plug connector Harting HAN 8D for continuously measuring sensors Document ID: 30376 Contents Contents 1 For your safety 1.1 Appropriate use... 3 1.2 Impermissible use... 3 1.3

More information

1.1 Functional Description: NO Switch Functional Description: Illumination TECHNICAL DATA AND DIMENSIONAL DRAWINGS...

1.1 Functional Description: NO Switch Functional Description: Illumination TECHNICAL DATA AND DIMENSIONAL DRAWINGS... Product Manual PSE NO Switch CONTENTS CONTENTS... 1 1 PRODUCT DESCRIPTION... 3 1.1 Functional Description: NO Switch... 3 1.2 Functional Description: Illumination... 4 2 TECHNICAL DATA AND DIMENSIONAL

More information

Connectors DIN 41612/IEC

Connectors DIN 41612/IEC Connectors DIN 41612/IEC 60603-2 and completions General information The DIN 41612/IEC 60603-2 connector family consists of 13 basic sizes and many complementary versions. It was developed for use in 19"

More information

Interfaces Service and Field

Interfaces Service and Field Interfaces Service and Field Front Panel Interfaces Interfaces Service Receptacles Cable Entry Systems 02 TRANSFORMATOREN 03 MODLINK MSDD THE CONNECTION TO THE OUTSIDE WORLD A safe bet MARKET REQUIREMENTS

More information

Description of parts Panel mounting Insert mounting without/with Carrier element Plastic housings

Description of parts Panel mounting Insert mounting without/with Carrier element Plastic housings - Contents Page Features -... 11.02 Component range -... 11.03 Description of parts... 11.04 Latching parts without/with Strain relief and Panel mounting parts... 11.06 Panel mounting... 11.08 Insert mounting

More information

Electrical Interconnections. Supplementary Catalog to Full Line Catalogs, Volumes 1/2/5 Edition 2012/2 1/2/5

Electrical Interconnections. Supplementary Catalog to Full Line Catalogs, Volumes 1/2/5 Edition 2012/2 1/2/5 Electrical Interconnections Supplementary Catalog to Full Line Catalogs, Volumes /2/ Edition 202/2 /2/ The new items in this catalog supplement products found in the following main catalogs /2/ Volume

More information

Features / Options. - MP-62 Series

Features / Options. - MP-62 Series MULTIPIN CONNECTORS Amphenol has an extensive range of circular and rectangular multipin connectors ideally suited to the entertainment industry. Featuring rugged housings and precision made contacts these

More information

Male header, 100% protected against mismating, (1 x 1) mm straight solder pins Pin spacing 3.5 mm 3.81 mm. light gray <_ 8,5_> 3,5 1x1 <_ 9,3_>

Male header, 100% protected against mismating, (1 x 1) mm straight solder pins Pin spacing 3.5 mm 3.81 mm. light gray <_ 8,5_> 3,5 1x1 <_ 9,3_> 96 Male Headers with Solder Pins; Double-Deck Male Headers with Solder Pins, Pin Spacing 3.5 mm and 3.81 mm 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5

More information

HD Series. Signal Connector DIN Applicable Markets: Mil-Aero Space Marine

HD Series. Signal Connector DIN Applicable Markets: Mil-Aero Space Marine Signal Connector DIN 41612 HDC and HDD interchangeable with DIN41612 C and D 0.6 mm and 1.0 mm Hypertac contacts, in a two or three row format Up to 192 positions HDT style offers mixed arrangements with

More information

Transforming customer wishes into concrete solutions

Transforming customer wishes into concrete solutions HARTING News 2013 HARTING worldwide Introduction Transforming customer wishes into concrete solutions The HARTING Technology Group is skilled in the fields of electrical, electronic and optical connection,

More information

Mating connectors and cable sets for valves and sensors in hydraulics

Mating connectors and cable sets for valves and sensors in hydraulics s and cable sets for valves and sensors in hydraulics RE 08006 Edition: 06-04 Replaces: 0. Features s and cable sets for electrical connection of: - Valve solenoids - Valves with integrated electronics

More information

NOVOHALL Rotary Sensor non-contacting. Series RSX-7900

NOVOHALL Rotary Sensor non-contacting. Series RSX-7900 NOVOHALL Rotary Sensor non-contacting Series RSX-7900 Special features very robust design to extreme environmental conditions high shaft load 300 N non-contacting, magnetic measuring angles up to 360 in

More information

HARTING Connectors for High Mating Cycles

HARTING Connectors for High Mating Cycles HARTING Connectors for High Mating Cycles HARTING worldwide Transforming customer wishes into concrete solutions The HARTING Technology Group is skilled in the fields of electrical, electronic and optical

More information

ME PLC Multifunctional housing for complex electronics. Data sheet _en_01. 1 Description

ME PLC Multifunctional housing for complex electronics. Data sheet _en_01. 1 Description Multifunctional housing for complex electronics Data sheet 105504_en_01 PHOENIX CONTACT 2013-04-08 1 Description The housings of the ME PLC 40... product group consist of a 40-mm wide housing base with

More information

K1D004ACH cam switch - 4-pole A - for Ø 22 mm

K1D004ACH cam switch - 4-pole A - for Ø 22 mm Characteristics cam switch - 4-pole - 45-12 A - for Ø 22 mm Main Range of product Product or component type Component name [Ith] conventional free air thermal current Mounting location Fixing mode Cam

More information

IDC Assembly (depends on cable) -55/125 C. IDC Assembly (depends on cable) By ambient temperature: 20 C 1,2 A 70 C 0,9 A 100 C 0,6 A

IDC Assembly (depends on cable) -55/125 C. IDC Assembly (depends on cable) By ambient temperature: 20 C 1,2 A 70 C 0,9 A 100 C 0,6 A mm Connectors Surface Mount Technology, Solderless Pressfit, IDC Electrical And Mechanical Characteristics Number of Pins Technical data Climate Category Bearing and operating temperature area Current

More information

PCB-COMPONENTS PCB-COMPONENTS CATALOGUE 2002/03 CATALOGUE 2002/03

PCB-COMPONENTS PCB-COMPONENTS CATALOGUE 2002/03 CATALOGUE 2002/03 2 PCB-COMPONENTS PCB-COMPONENTS CATALOGUE 2002/03 CATALOGUE 2002/03 CATALOGUE 2002/03 CATALOGUE 2002/03 Rated cross-section 10.0 2 GSE 10/180 LU 10.16/90 LU 10.16/90 with test point 4 solder pins per pole

More information

Standard Buccaneer - Ethernet

Standard Buccaneer - Ethernet IP6 rated IP69K, Tested in accordance with DIN 40050/Part 9 IP6k9k or compliant PUR / PVC jacket on cable Shielded system or shielded coupler Shroud on RJ45 Screw coupling Rewireable flex connector PCB

More information

Series 801 Mighty Mouse Double-Start ACME Thread Receptacle

Series 801 Mighty Mouse Double-Start ACME Thread Receptacle Series 0 Mighty Mouse ouble-start ACME Thread Receptacle 0-00 and 0-00 Ordering Information Series 0 Rear Panel Jam Nut Mount Shell Style 0 Square Flange Mount Shell Style 0// In-Line Shell Style 0 How

More information

µcom-10gb + MAIN FEATURES FEATURES AND BENEFITS MARKETS & APPLICATIONS Harsh Environment 10Gb Ethernet Micro Connectors Amphenol Socapex

µcom-10gb + MAIN FEATURES FEATURES AND BENEFITS MARKETS & APPLICATIONS Harsh Environment 10Gb Ethernet Micro Connectors Amphenol Socapex Harsh Environment 10Gb Ethernet Micro Connectors 15mm µcom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the highest resistance

More information

CX BD series. Main features MULTIPOLE CONNECTORS CX BD CN

CX BD series. Main features MULTIPOLE CONNECTORS CX BD CN MULTIPOLE CONNECTORS CX BD CN i CX BD series Main features To be able to use round shielded connectors series MIXO BUS (multiaxial, for balanced cables with multiple pairs) or coaxial connectors (for coaxial

More information

Introduction. The information pages provide standard data common to all D-subminiature connectors. These include:

Introduction. The information pages provide standard data common to all D-subminiature connectors. These include: Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications

More information

ODU-MAC A PERFECT ALLIANCE. AUTOMATIC DOCKING MANUAL MATING SHORT OVERVIEW

ODU-MAC A PERFECT ALLIANCE. AUTOMATIC DOCKING MANUAL MATING SHORT OVERVIEW A PERFECT ALLIANCE. ODU-MAC Compact modular connector system. Up to 6,00 V, 0 bar, 0 Gbit/s, 00,000 mating cycles and 9.0 GHz. AUTOMATIC DOCKING MANUAL MATING SHORT OVERVIEW ODU-MAC SILVER-LINE ODU-MAC

More information

#redcube. REDCUBE PRESS-FIT REDCUBE PLUG REDCUBE SMD REDCUBE THR

#redcube.   REDCUBE PRESS-FIT REDCUBE PLUG REDCUBE SMD REDCUBE THR #redcube REDCUBE Terminals are the most reliable high-power contacts on PCB level. Low contact resistance guarantees minimum self-heating. Four different designs cover all leading processing technologies

More information