FE Series Photoelectric Sensors

Transcription

1 FE Series Photoelectric Mini-rectangular plastic - DC 2 models available Diffuse, polarized reflective, and through-beam models Plastic housing Axial cable or M8 quick-disconnect models NPN or PNP, Light-on/Dark-on selectable output IP67 rated FE Series Photoelectric Selection Chart Part Number Price Sensing Range Output State Logic Connection Dimensions Characteristic Curves Diffuse FER8-0N-0A NPN 2m (6.5) axial cable Figure 2 Chart FER8-0P-0A 800mm (.49in) Light-on/Dark-on PNP 2m (6.5) axial cable Figure 2 Chart FER8-0N-0F Selectable NPN M8 (8mm) connector Figure Chart FER8-0P-0F PNP M8 (8mm) connector Figure Chart Polarized reflective* FERN-0N-0A 4m (.2ft) NPN 2m (6.5) axial cable Figure 2 Chart 2 FERN-0P-0A with RL0 Light-on/Dark-on PNP 2m (6.5) axial cable Figure 2 Chart 2 FERN-0N-0F Selectable m (9.7in) NPN M8 (8mm) connector Figure Chart 2 FERN-0P-0F with RL22 PNP M8 (8mm) connector Figure Chart 2 Through-beam FERHD-0N-0A Each part NPN 2m (6.5) axial cable Figure 2 Chart FERHD-0P-0A number consists of an emitter 2m (9.7ft) Light-on/Dark-on PNP 2m (6.5) axial cable Figure 2 Chart FERHD-0N-0F Selectable and receiver NPN M8 (8mm) connector Figure Chart pair FERHD-0P-0F PNP M8 (8mm) connector Figure Chart Overview DL05/06 DL05 DL205 DL05 DL405 Field I/O Software C-more HMIs Other HMI AC Drives Motors Steppers/ Servos Motor Controls Proximity *Note: Polarized reflective sensors include one round reflector (84mm dia.) and one rectangular reflector (2mm x 54mm). Purchase additional reflectors separately. Wiring diagrams Cables and Accessories Cables and accessories can be found starting on page 8 64 M8 connector (OUT) Photo Limit Switches Encoders Current 4 Pushbuttons/ Lights Supply (+) Connector on sensor S upply (--) Process Relays/ Timers Dimensions Figure Figure 2 Horizontal mounting bracket supplied with each unit M 2.5 Comm. TB s & Wiring Power Circuit Protection Enclosures Appendix Part Index 8 7

2 FE Series Photoelectric Specifications Diffuse Models Reflective Models Through-Beam Models Type Diffuse reflection Polarized reflection Through-beam 4 Sensing Distance 4m with RL0 800mm m with RL22 2 Emission Red LED (visable) Blind Zone - 0mm - Sensitivity Adjustable Differential Travel 20% - Response Time Operating Voltage Ripple 5ms 0-0VDC No-load Supply Current 0mA Emitter: 5mA; Receiver: 20mA Load Current Leakage Current Voltage Drop Output Type Switching Frequency (tv) Time Delay Before Availability Input Voltage Transients Protection Input Power Polarity Reversal Protection Output Power Short-Circuit Protection 0% 00mA.8V max at 00mA NPN or PNP - Light-on/Dark-on Rotary Switch khz 00ms Yes, as long as the transient peak does not reach 0VDC Yes Yes, switch autoresets after load is removed Temperature Range -25/+55 C (- to F) Temperature Drift Interference to External Light Protection Degree (DIN 40050) LED Indicators Housing Material Lens Material Tightening Torque Weight (cable/connector) 5% Sr 000 lux (incandescent lamp), 0000 lux (sunlight) IP67 Yellow (output energized) PBT PC 40 N-m (29 lb-ft) 5g (.87oz) / 9g (0.2oz) With 00x00mm white matte paper 2 With Ø84mm RL0 reflector or 2 x 54mm RL22 reflector. Each sensor includes one 84mm round reflector (RL0) and one 2 x 54mm rectangular reflector. Purchase additional reflectors separately. 4 Each through-beam part number consists of an emitter and receiver pair. 20m Characteristic curves Chart 00 Excess Gain Chart 2 00 Excess Gain Warning: These products are not safety sensors and are not suitable for use in personal safety applications. Chart Excess Gain 00 Gain 0 90% Gain 0 RL07 Gain 0 8% RL0 6% Distance (mm) x 0 RL Distance (m) Distance (m)

3 Photoelectric Accessories: Cables Cables with quick-disconnect plugs Industry standard axial and right-angle M8/M2 screw-lock connectors. The cables listed below can be used with extension cables 2m, 5m, and 7m cable lengths PVC (polyvinyl chloride) jacket for typical industrial applications PUR (polyurethane) jacket for oily and direct sunlight applications IP67 rated Dimensions Figure Figure 2 M8 Quick-Disconnect Cables Part Number Price Length Poles Connector Jacket Dimensions M8 Quick-Disconnects CD08-0A-020-A <---> 2m (6.5ft.) Axial PVC Figure CD08-0A-020-C <---> 2m (6.5ft.) Right-angle PVC Figure 2 CD08-0A-050-A <---> 5m (6.4ft.) Axial PVC Figure CD08-0C-050-A <---> 5m (6.4ft.) Axial PUR Figure CD08-0A-050-C <---> 5m (6.4ft.) Right-angle PVC Figure 4 CD08-0C-050-C <---> 5m (6.4ft.) Right-angle PUR Figure 4 CD08-0A-070-A <---> 7m (2ft.) Axial PVC Figure CD08-0A-070-C <---> 7m (2ft.) Right-angle PVC Figure 2 Figure Figure 4 M2 Quick-Disconnect Cables Part Number Price Length Poles Connector Jacket Dimensions M2 Quick-Disconnects CD2L-0B-020-A0 <---> 2m (6.5ft.) 4 Axial PVC Figure 5 CD2L-0B-020-C0 <---> 2m (6.5ft.) 4 Right-angle PVC Figure 6 CD2M-0B-050-A* <---> 5m (6.4ft.) Axial PVC Figure 7 CD2M-0D-050-A* <---> 5m (6.4ft.) Axial PUR Figure 7 CD2M-0B-050-C* <---> 5m (6.4ft.) Right-angle PVC Figure 8 CD2M-0D-050-C* <---> 5m (6.4ft.) Right-angle PUR Figure 8 CD2M-0B-070-A <---> 7m (2ft.) 4 Axial PVC Figure 5 CD2M-0B-070-C <---> 7m (2f.t) 4 Right-angle PVC Figure 6 * Note: Do not use with: DM, FA, QX, SS, SSF, MS and MSF series photoelectric sensors. These sensors require 4-pole cables. Figure 5 Figure 6 Cable Specifications M8 M2 Length 5m (6.4ft.) 2m (6.5ft.)/ 7m (2ft.) 2m (6.5ft.)/ 7m (2ft.) 5m (6.4ft.) Nominal Voltage 50VAC/75VDC 60VAC/75VDC 00VAC 60VAC/75VDC Nominal Current 4A.5A 4A.5A Protection Degree IEC IP67 IEC IP67 Contact Body Material ABS PUR ABS PUR Housing Material PUR PUR Contacts Material CuSn CuZn CuSn CuZn Conductors Section 0.4mm 2 0.4mm 2 Ø Outer Cable 5mm 5mm Temperature Range -25 to +70 C (- to 58 F) -25 to +70 C (- to 58 F) Figure 7 Figure

4 Photoelectric Accessories: Extension Cables Extension cables with quick-disconnect plugs on each end Available extension cables include: Industry standard M8 and M2 screw-lock connectors Axial and right-angle connector models m and m cable lengths PVC (polyvinyl chloride) jacket for typical industrial applications IP67 rated Dimensions Figure o0 o0 M8x M8x 9 Overview DL05/06 DL05 DL205 DL05 DL405 Field I/O Software Figure 2 C-more HMIs M8 Extension Cables with Quick-Disconnect on each end Part Number Price Length Poles Connectors Jacket Dimensions M8 Quick-Disconnect Extension Cables Other HMI AC Drives CDP08-0A-00-AA <---> m (.28ft.) 2 Axial PVC Figure CDP08-0A-00-BB <---> m (.28ft.) 2 Right-angle PVC Figure 2 CDP08-0A-00-AA <---> m (9.84ft.) 2 Axial PVC Figure CDP08-0A-00-BB <---> m (9.84ft.) 2 Right-angle PVC Figure 2 M8x o0 24 Motors Steppers/ Servos M2 Extension Cables with Quick-Disconnect on each end Part Number Price Length Poles Connectors Jacket Dimensions M2 Quick-disconnect Extension Cables CDP2-0B-00-AA <---> m (.28ft.) 4 2 Axial PVC Figure CDP2-0B-00-BB <---> m (.28ft.) 4 2 Right-angle PVC Figure 4 CDP2-0B-00-AA <---> m (9.84ft.) 4 2 Axial PVC Figure CDP2-0B-00-BB <---> m (9.84ft.) 4 2 Right-angle PVC Figure 4 Figure 25.5 M8x o0 Motor Controls Proximity Photo Limit Switches Encoders Cable Specifications Length Nominal Voltage Nominal Current Protection Degree Contact Body Material Housing Material Contacts Material M8 / M2 m (.28ft.)/ m (9.84ft.) 50VAC/75VDC 4A IEC IP67 ABS PUR CuSn Conductors Section 0.4mm 2 Ø Outer Cable Temperature Range 5mm -25 to +70 C (- to 58 F) Figure 4 o5 o5 M2x M2x Current Pushbuttons/ Lights Process Relays/ Timers Comm. TB s & Wiring Power Circuit Protection 27 Enclosures Appendix M2x o5 M2x o5 Part Index

5 Photoelectric Accessories: Cables Cables with quick-disconnect plugs for DFT/DFP Models Do not use extension cables with the cable listed below. The physical pin configurations do not match. Available cables include: Industry standard M8 screw-lock connectors Axial and right-angle connector models 2m, 5m and 0m cable lengths PVC (polyvinyl chloride) jacket for typical industrial applications IP68 rated M8 Cables with Quick-Disconnect Part Number Price Length Poles Connectors Jacket Dimensions M8 Quick-Disconnects CD08-0G-020-A <---> 2m (6.56ft.) 4 Axial PVC Figure CD08-0W-020-C <---> 2m (6.56ft.) 4 Right-angle PVC Figure 2 CD08-0G-050-A <---> 5m (6.4ft.) 4 Axial PVC Figure CD08-0W-050-C <---> 5m (6.4ft.) 4 Right-angle PVC Figure 2 CD08-0G-00-A <---> 0m (2.8ft.) 4 Axial PVC Figure CD08-0W-00-C <---> 0m (2.8ft.) 4 Right-angle PVC Figure 2 Cable Specifications Length Nominal Voltage Nominal Current Protection Degree Contact Body Material Housing Material Contacts Material M8 2m (6.56ft.) 5m (6.4ft.) 0m (2.8ft.) 0VAC/0VDC 4A IEC IP67 ABS PUR CuSn Conductors Section 0.25mm 2 Ø Outer Cable Temperature Range 4.5mm -5 to +70 C (2 to 58 F) Dimensions (mm) Figure 4 2 o Figure 2 o0 L Use these cables if the sensor pin configuration looks like the connector pin-out below. M8 Connector brown () white (2) blue () black (4) brown () white (2) blue () black (4) L o

6 Accessories: Reflectors and Shutters RL series reflectors for polarized reflective photoelectric sensors (all models) Suitable for use with polarized light photoelectric sensors Shapes and sizes for most applications Miniature types for close mounting in multiple sensor installations Single hole, dual hole and stud mounting types available 0 reflectors per package Installation notes Keep the reflector surface clean to ensure peak detection performance. This is especially true when the maximum sensing range is being used. Clean using a damp cloth When selecting a reflector, it is important to consider the ambient conditions it will be exposed to. Dusty or high humidity conditions may reduce the sensing range as much as 90%. Reflectors should be positioned at a 90 angle to the optical axis with a tolerance of ±5. Dimensions.4 29 mm.8 5 mm 5.7 mm thickness Overview DL05/06 DL05 DL205 DL05 DL405 Field I/O Software C-more HMIs Other HMI AC Drives Motors Steppers/ Servos Motor Controls Proximity ST0S through ST0S8 shutters for M8 (8 mm) through-beam sensors (SSE / SSR) Specifications Model RL02 RL0 RL04 RL05 RL06G RL09 RL0 Price (0 per pack) <---> <---> <---> <---> <---> <---> <---> % Sensing Range Using SSP 50% 40% 50% 50% 50% 50% 00% % Sensing Range Using QXP -- 5% 60% 50% 45% 0% 00% Dimensions Ø26mm Ø6mm Ø47mm 90x40mm 82x42mm Ø8mm Ø84mm Degree of Protection 2 Mounting Materials IEC IP67 Customer-supplied adhesive or other mounting method required Acrylic/polycarbonate Refer to individual catalog pages for detailed explanations of these photoelectric sensors. 2 Not recommended for applications involving moist air environments or water immersion. All reflective sensors are shipped with an RL0 reflector. Reduces the emitted beam, allowing the detection of small targets two Ø4.mm holes two Ø6mm holes one M5 stud one Ø5mm hole Sensing Distance (when used with SSE / SSR Model Photoelectric switches) Model ST0S ST0S2 ST0S ST0S4 ST0S6 ST0S8 Pieces Per Pack Price <---> <---> <---> <---> <---> <---> Ø x shutter (mm) Distance (m) object (mm) Shutter consists of a threaded ring-nut, a protective lens, an O-ring and an aperture, which can screw onto the optical head of either the emitter or receiver. The table above shows the sensing distance and minimal detectable object. N/A N/A N/A N/A Photo Limit Switches Encoders Current Pushbuttons/ Lights Process Relays/ Timers Comm. TB s & Wiring Power Circuit Protection Enclosures Appendix Part Index

7 Accessories: Reflectors, Adapters & Mounting Brackets RL series reflectors for polarized reflective Laser photoelectric sensors (FALN series) Suitable for use with polarized light Laser photoelectric sensors Sizes for most applications Miniature types for close mounting in multiple sensor installations 5 reflectors per package Specifications Model RL20 RL20 RL204 Sensing Range Using FALN 0m 7m 7m Dimensions 60mm x 82mm 9mm x 60mm 20mm x 2mm Mounting two Ø4mm holes two Ø6mm holes two Ømm holes Degree of Protection 2 Materials Acrylic/polycarbonate IEC IP67 Refer to individual catalog pages for detailed explanations of these photoelectric sensors. 2 Not recommended for applications involving moist air environments or water immersion. Note: All reflective sensors are shipped with an RL0 reflector. Purchase additional reflectors separately. RL20 RL20 RL204 <---> <---> <---> (5 per pack) (5 per pack) (5 per pack) ST0 right-angle M8 (8 mm) beam adapter ST02 plastic swivel bracket M8 (8 mm) For use with M8 retroreflective and Plastic mounting bracket for use through-beam photoelectric switches (not for use with diffuse reflection sensors). Allows 90 light detection using an internal mirror set at 45 to the optical axis. Sensitivity loss is about 20-0%. with M8 photoelectric switches. Has a ball-joint and set screws to adjust sensor orientation. Allows orientation in all directions for retroreflective and through-beam <---> sensors. (Will not work with C8 series). <--->

8 Accessories: Mounting Brackets ST2A metal axial bracket For mounting M2 (2 mm) sensors. Has two mounting holes (use mm screws) and allows the rotation of an optical axis for right-beam angle adapter sensors. ST8A metal axial bracket Metal mounting bracket for M8 (8mm) sensors. Has two mounting holes (use 4 mm screws) and allows the rotation of an optical axis for right-beam-angle-adapter sensors. <---> <---> ( per pack) ( per pack) Overview DL05/06 DL05 DL205 DL05 DL405 Field I/O Software C-more HMIs Other HMI AC Drives Motors slot for M4 screw fixing Steppers/ Servos Motor Controls ST2C metal right-angle bracket Metal angular mounting bracket for use with M2 (2 mm) sensors. Has two mounting holes (use mm screws) and allows the rotation of an optical axis for axial sensors. <---> ( per pack) ST8C metal right-angle bracket Metal angular mounting bracket for M8 (8 mm) sensors. Has two mounting holes (use 4 mm screws) and allows the rotation of an optical axis for axial sensors. <---> ( per pack) Proximity Photo Limit Switches Encoders Current Pushbuttons/ Lights Process Relays/ Timers Comm. TB s & Wiring Power Circuit Protection slot for M4 screw fixing Enclosures Appendix Part Index