DC561, digital input/output module,
|
|
- Kelly Melton
- 5 years ago
- Views:
Transcription
1 Ordering Data DATA SHEET DC561 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE R2001 DC561, digital input/output module, 16 configurable inputs/outputs, transistor output, interfast connector Active *) For planning and commissioning of new installations use modules in Active status only. 2018/11/12 3ADR010045, 3, en_us 1
2 Technical Data 2 Dimensions The dimensions are in mm and in brackets in inch. 3 Technical Data The System Data of AC500-eCo apply Ä Chapter 4 System Data AC500-eCo on page 5 Only additional details are therefore documented below. Process voltage UP Connections Rated value Current consumption via UP terminal Max. ripple 5 % Inrush current Protection against reversed voltage Protection fuse on UP Current consumption from 24 VDC power supply at the L+/UP and M/ZP terminals of the CPU/bus module Galvanic isolation Terminals 17 and 19 for UP (+24 VDC); terminals 18 and 20 for ZP (0 V) 24 VDC 10 ma A per output (max.) A 2 s Yes Recommended; the outputs must be protected by an 1 A fast fuse Ca. 10 ma Yes, between the input/output group and the rest of the module 2 3ADR010045, 3, en_us 2018/11/12
3 Technical Data of the Digital Inputs/Outputs if Used as Inputs Isolated groups Surge voltage (max.) Max. power dissipation within the module Input data length Output data length Weight Mounting position Cooling 1 group for 16 channels 35 VDC for 0.5 s On request 2 bytes 2 bytes Ca. 115 g Horizontal or vertical The natural convection cooling must not be hindered by cable ducts or other parts in the switchgear cabinet. No effects of multiple overloads No effects of multiple overloads on isolated multi-channel modules occur, as every channel is protected individually by an external fuse. 3.1 Technical Data of the Digital Inputs/Outputs if Used as Inputs Number of channels per module Distribution of the channels into groups 16 configurable inputs (24 VDC) 1 (16 channels per group) Connections of the channels C0 to C15 Terminals 1 to 16 Reference potential for the channels C0 to C15 Indication of the input signals Input type according to EN Input signal range Signal 0 Undefined signal Signal 1 Ripple with signal 0 Ripple with signal 1 Input current per channel Input voltage +24 V Input voltage +5 V Input voltage +15 V Input voltage +30 V Max. permissible leakage current (at 2-wire proximity switches) Input delay (0->1 or 1->0) Max. cable length Terminals 18 and 20 (negative pole of the process voltage, name ZP) 1 yellow LED per channel; the LED is ON when the input signal is high (signal 1). The module is powered via the I/O bus. Type 1 sink +24 VDC -3 V...+5 V +5 V V +15 V V -3 V...+5 V +15 V V Typ. 5 ma Typ. 1 ma > 2.5 ma < 8 ma 1 ma Typ. 8 ms 2018/11/12 3ADR010045, 3, en_us 3
4 Technical Data of the Digital Inputs/Outputs if Used as Outputs Shielded Unshielded 500 m 300 m 3.2 Technical Data of the Digital Inputs/Outputs if Used as Outputs Number of channels per module Distribution of the channels into groups 16 configurable transistor outputs 1 (16 channels per group) Connections of the channels C0 to C15 Terminals 1 to 16 Reference potential for the channels C0 to C15 Common power supply voltage Indication of the input signals Way of operation Output voltage at signal 1 Output delay (max. at rated load) 0 to 1 50 µs 1 to µs Output current Rated current per channel (max.) Rated current per group (max.) Rated current (all channels together, max.) Lamp load (max.) Max. leakage current with signal 0 Output type Protection type Rated protection fuse (for each channel) Demagnetization when inductive loads are switched off Switching frequency With inductive loads Short-circuit-proof / overload-proof Overload message Output current limitation Resistance to feedback against 24 VDC signals Connection of 2 outputs in parallel Max. cable length Terminals 18 and 20 (negative pole of the process voltage, signal name ZP) Terminals 17 and 19 (positive pole of the process voltage, signal name UP) 1 yellow LED per channel; the LED is ON when the input signal is high (signal 1). The module is powered via the I/O bus. Non-latching type UP -0.3 V at max. current 0.1 A at UP 24 VDC 1.6 A 1.6 A < 0.5 ma Non-protected External fuse on each channel 1 A fast Must be performed externally according to load specification Max. 0.5 Hz No No No Yes Not possible 4 3ADR010045, 3, en_us 2018/11/12
5 System Data AC500-eCo Environmental Conditions Shielded Unshielded 500 m 150 m 4 System Data AC500-eCo 4.1 Environmental Conditions Table 1: Process and Supply Voltages 24 VDC 100 VAC 230 VAC Voltage 24 V (-15 %, +20 %) Protection against reverse polarity Yes Voltage 100 V (-15 %, +10 %) Frequency 50/60 Hz (-6 %, +4 %) Voltage 230 V (-15 %, +10 %) Frequency 50/60 Hz (-6 %, +4 %) VAC wide range supply Voltage 100 V V (-15 %, +10 %) Frequency 50/60 Hz (-6 %, +4 %) Allowed interruptions of power supply, according to EN DC supply Interruption < 10 ms, time between 2 interruptions > 1 s, PS2 AC supply Interruption < 0.5 periods, time between 2 interruptions > 1 s NOTICE! Exceeding the maximum power supply voltage (> 30 VDC) for process or supply voltages could lead to unrecoverable damage of the system. The system could be destroyed. Temperature Humidity Operating Storage -40 C C Transport -40 C C Air pressure 0 C C (horizontal mounting of modules) 0 C C (vertical mounting of modules and output load reduced to 50 % per group) Max. 95 %, without condensation 2018/11/12 3ADR010045, 3, en_us 5
6 Insulation Test Voltages, Routine Test Operating Storage > 800 hpa / < 2000 m > 660 hpa / < 3500 m 4.2 Creepage Distances and Clearances The creepage distances and clearances meet the requirements of the overvoltage category II, pollution degree Insulation Test Voltages, Routine Test According to EN V V circuits against 100 V V circuits against 100 V V circuits against 2500 V 1.2/50 µs 1500 V 1.2/50 µs 2500 V 1.2/50 µs 24 V circuits (supply, 24 V inputs/outputs, analogue inputs/ outputs ), if they are electrically isolated against COM interfaces, electrically isolated COM interfaces, electrically not isolated 500 V 1.2/50 µs 500 V 1.2/50 µs FBP interface 500 V 1.2/50 µs Ethernet 500 V 1.2/50 µs ARCNET 500 V 1.2/50 µs 200 V V circuits against 100 V circuits against 100 V V circuits against 1350 V AC 2 s 820 V AC 2 s 1350 V AC 2 s 24 V circuits (supply, 24 V inputs/outputs, analogue inputs/ outputs), if they are electrically isolated against COM interfaces, electrically isolated COM interfaces, electrically not isolated 350 V AC 2 s 350 V AC 2 s FBP interface 350 V AC 2 s 6 3ADR010045, 3, en_us 2018/11/12
7 Electromagnetic Compatibility Ethernet 350 V AC 2 s ARCNET 350 V AC 2 s 4.4 Power Supply Units For the supply of the modules, power supply units according to PELV specifications must be used. 4.5 Electromagnetic Compatibility Immunity Immunity against electrostatic discharge (ESD): Electrostatic voltage in case of air discharge Electrostatic voltage in case of contact discharge ESD with communication connectors Immunity against the influence of radiated (CW radiated): Test field strength Immunity against transient interference voltages (burst): Supply voltage units (DC) Supply voltage units (AC) Digital inputs/outputs (24 VDC) Digital inputs/outputs (120 VAC VAC) Analog inputs/outputs CS31 system bus Serial RS-485 interfaces (COM) Serial RS-232 interfaces (COM, not for PM55x and PM56x) ARCNET FBP Ethernet I/O supply, DC-out Immunity against the influence of line-conducted interferences (CW conducted): Test voltage High energy surges According to IEC , zone B, criterion B 8 kv 4 kv, in a closed switch-gear cabinet 6 kv 1 ) In order to prevent operating malfunctions, it is recommended, that the operating personnel discharge themselves prior to touching communication connectors or perform other suitable measures to reduce effects of electrostatic discharges. According to IEC , zone B, criterion A 10 V/m According to IEC , zone B, criterion B 2 kv 2 kv 2 kv According to IEC , zone B, criterion A 3 V zone B, 10 V is also met. According to IEC , zone B, criterion B 2018/11/12 3ADR010045, 3, en_us 7
8 Approvals and certifications Immunity Power supply AC 2 kv CM / DM ²) Power supply DC CM / 0.5 kv DM ²) DC I/O supply, add. DC-supply-out 0.5 kv CM / 0.5 kv DM ²) Buses, shielded CM ²) AC I/O unshielded 2 kv CM / DM ²) I/O analog, I/O DC unshielded CM / 0.5 kv DM ²) Radiation (radio disturbance) According to IEC 55011, group 1, class A 1 ) High requirement for shipping classes are achieved with additional specific measures (see specific documentation). ²) CM = Common Mode, DM = Differential Mode 4.6 Mechanical Data Mounting Horizontal Degree of protection IP 20 (if all terminal screws are tightened) Housing According to UL 94 Vibration resistance acc. to EN all three axes (DIN rail mounting) 5 Hz Hz, continuous 3.5 mm 11.9 Hz Hz, continuous 1 g Shock test All three axes 15 g, 11 ms, half-sinusoidal Mounting of the modules: DIN rail according to DIN EN mm, depth 7.5 mm or 15 mm Mounting with screws Screws with a diameter of 4 mm Fastening torque 1.2 Nm 4.7 Approvals and certifications Information on approvals and certificates can be found in the corresponding chapter of the Main catalog, PLC Automation. ABB Automation Products GmbH Eppelheimer Str Heidelberg, Germany Telephone: +49 (0) Fax: +49 (0) plc.support@de.abb.com abb.com/plc Copyright ABB. We reserve all rights in this document and in the information contained therein. Reproduction, use or disclosure to third parties without express authority is strictly forbidden. 8 3ADR010045, 3, en_us 2018/11/12
DC562, digital input/output module,
Ordering Data DATA SHEET DC562 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 231 900 R0000 1TNE 968 901 R3101 1TNE 968 901 R3102 1TNE 968 901 R3103 1TNE
More informationDX561 Digital Input/Output Module
Ordering Data DATA SHEET DX561 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R2301 1TNE 968 901 R3101 DX561, digital input/output module, 8 DI
More informationDI561 Digital Input Module
Ordering Data DATA SHEET DI561 Digital Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R2101 1TNE 968 901 R3101 1TNE 968 901 R3103 1TNE 968 901 R3105 DI561, digital
More informationDI572 Digital Input Module
Ordering Data DATA SHEET DI572 Digital Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 230 500 R0000 1TNE 968 901 R3101 1TNE 968 901 R3102 1TNE 968 901 R3103 1TNE 968
More informationAI561 Analog Input Module
Ordering Data DATA SHEET AI561 Analog Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R1101 AI561, analog input module, 4 AI, U/I 1TNE 968 901 R3101 1TNE 968
More informationAO561 Analog Output Module
Ordering Data DATA SHEET AO561 Analog Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1TNE 968 902 R1201 AO561, analog output module, 2 AO, U/I 1TNE 968 901 R3102 Terminal
More informationAO523 Analog Input Module
Ordering Data DATA SHEET AO523 Analog Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 250 200 R0001 1SAP 450 200 R0001 AO523, analog output module, 16 AO, U/I, 12 bits
More informationDC522 Digital Input/Output Module
Ordering Data DATA SHEET DC522 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 240 600 R0001 1SAP 440 600 R0001 DC522, digital input/output module, 16
More informationDC532-XC, digital input/output module,
Ordering Data DATA SHEET DC532 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 240 100 R0001 1SAP 440 100 R0001 DC532, digital input/output module, 16
More informationDC541 Digital Input/Output Module
Ordering Data DATA SHEET DC541 Digital Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 270 000 R0001 1SAP 470 000 R0001 DC541-CM, digital input/output module,
More informationAX521 Analog Input/Output Module
Ordering Data DATA SHEET AX521 Analog Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 250 100 R0001 1SAP 450 100 R0001 AX521, analog input/output module, 4 AI,
More informationTU531, TU532 Terminal Unit
Ordering Data DATA SHEET TU531, TU532 Terminal Unit 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 217 200 R0001 1SAP 217 000 R0001 1SAP 417 000 R0001 TU531, terminal unit, 230 VAC,
More informationCI542 PROFIBUS Communication Interface Module
Ordering Data DATA SHEET CI542 PROFIBUS Communication Interface Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 224 200 R0001 1SAP 424 200 R0001 CI542-DP, PROFIBUS DP bus module,
More informationCD522 Encoder, Counter and PWM Module
Ordering Data DATA SHEET CD522 Encoder, Counter and PWM Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 260 300 R0001 1SAP 460 300 R0001 CD522, encoder & PWM module, 2 encoder
More informationPart No. Description Product Life Cycle Phase *) unit, 24 VDC, spring terminals. unit, 24 VDC, spring terminals, XC version
Ordering Data DATA SHEET TU520 Terminal Unit 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 214 400 R0001 1SAP 414 400 R0001 TU520-ETH, PROFINET I/O terminal unit, 24 VDC, spring
More informationAX522 Analog Input/Output Module
Ordering Data DATA SHEET AX522 Analog Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 250 000 R0001 1SAP 450 000 R0001 AX522, analog input/output module, 8 AI
More informationTF501, TF521 Terminal Bases
Ordering Data DATA SHEET TF501, TF521 Terminal Bases 1 Ordering Data Part No. Scope of delivery Product life cycle status 1SAP 117 000 R0271 1SAP 317 000 R0271 1SAP 117 200 R0271 1SAP 317 200 R0271 TF501-CMS,
More informationAI531 Analog Input Module
Ordering Data DATA SHEET AI531 Analog Input Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 250 600 R0001 AI531, analog input module, 8 AI, U/I/Pt100, TC, 15 bits + sign, 4-wires
More informationDA502 Digital/Analog Input/Output Module
Ordering Data DATA SHEET DA502 Digital/Analog Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 250 800 R0001 1SAP 450 800 R0001 DA502, digital/analog input/output
More informationCI541 PROFIBUS Communication Interface Module
Ordering Data DATA SHEET CI541 PROFIBUS Communication Interface Module 1 Ordering Data Ordering No. Scope of delivery Product Life Cycle Phase *) 1SAP 224 100 R0001 1SAP 424 100 R0001 CI541-DP, PROFIBUS
More informationCM592 PROFIBUS Communication Module
Ordering Data DATA SHEET CM592 PROFIBUS Communication Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 173 200 R0001 1SAP 373 200 R0001 CM592-DP, communication module PROFIBUS
More informationCI504 PROFINET Communication Interface Module
Ordering Data DATA SHEET CI504 PROFINET Communication Interface Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 221 300 R0001 1SAP 421 300 R0001 CI504-PNIO, PROFINET Bus Module
More informationDA502 Digital/Analog Input/Output Module
Ordering Data DATA SHEET DA502 Digital/Analog Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 250 800 R0001 1SAP 450 800 R0001 DA502, digital/analog input/ output
More informationDA502 Digital/Analog Input/Output Module
Ordering Data DATA SHEET DA502 Digital/Analog Input/Output Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 250 800 R0001 1SAP 450 800 R0001 DA502, digital/analog input/ output
More informationCI521 Modbus Communication Interface Module
Ordering Data DATA SHEET CI521 Modbus Communication Interface Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 222 100 R0001 1SAP 422 100 R0001 CI521-MODTCP, Modbus TCP bus
More informationCM589 PROFINET Communication Module
Ordering Data DATA SHEET CM589 PROFINET Communication Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 172 900 R0011 1SAP 372 900 R0011 1SAP 172 900 R0111 1SAP 372 900 R0111
More informationCM579-PNIO PROFINET Communication Module
Ordering Data DATA SHEET CM579-PNIO PROFINET Communication Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 170 901 R0101 1SAP 370 901 R0101 CM579-PNIO, PROFINET communication
More informationCM589 PROFINET Communication Module
Ordering Data DATA SHEET CM589 PROFINET Communication Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 172 900 R0011 1SAP 372 900 R0011 1SAP 172 900 R0111 1SAP 372 900 R0111
More informationCM597 Ethernet Communication Module
Ordering Data DATA SHEET CM597 Ethernet Communication Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 173 700 R0001 1SAP 373 700 R0001 CM597-ETH, communication module Ethernet
More informationCI501 PROFINET Communication Interface Module
Ordering Data DATA SHEET CI501 PROFINET Communication Interface Module 1 Ordering Data Part No. Description Product Life Cycle Phase *) 1SAP 220 600 R0001 1SAP 420 600 R0001 CI501-PNIO (V3), PROFINET bus
More informationControl Panel CP600-eCo CP604, CP604-B
DATA SHEET Control Panel CP600-eCo CP604, CP604-B 1 Ordering Data Part No. Description Product Life Cycle Phase 1SAP504100R0001 CP604, control panel, TFT graphical display, single-touch screen, 4.3, Active
More informationPM572, PM573, PM582, PM583, PM585, PM590, PM591, PM592
Ordering Data DATA SHEET PM572, PM573, PM582, PM583, PM585, PM590, PM591, PM592 Processor Module 1 Ordering Data Processor Modules for AC500 (Standard) V2 Products Part No. Description Product Life Cycle
More informationPM572, PM573, PM582, PM583, PM585, PM590, PM591, PM592
Ordering Data DATA SHEET PM572, PM573, PM582, PM583, PM585, PM590, PM591, PM592 Processor Module 1 Ordering Data Processor Modules for AC500 (Standard) V2 Products Part No. Description Product Life Cycle
More informationControl Panel CP600 CP651, CP651-WEB
DATA SHEET Control Panel CP600 CP651, CP651-WEB 1 Ordering Data Part No. Description Product Life Cycle Phase 1SAP551100R0001 CP651, control panel, TFT graphical display, single-touch screen, 10.4, Active
More informationControl Panel CP600 CP635, CP635-B, CP635-WEB
DATA SHEET Control Panel CP600 CP635, CP635-B, CP635-WEB 1 Ordering Data Part No. Description Product Life Cycle Phase 1SAP535100R0001 CP635, control panel, TFT graphical display, single-touch screen,
More informationControl Panel CP600 CP635-FB, CP635-FW
DATA SHEET Control Panel CP600 CP635-FB, CP635-FW 1 Ordering Data Part No. Description Product Life Cycle Phase 1SAP535110R6001 CP635-FB, control panel, TFT graphical display, single-touch projected Active
More informationMINI-PS AC/10-15DC/8
Primary-Switched Power Supply, Narrow Design Data Sheet 08/2004 MINI POWER provides: An extra narrow design, with widths of 22.5 mm, 45 mm, and 67.5 mm (0.886, 1.772, and 2.657 in.) Global use due to a
More informationRTU500 series Data Sheet Power Supply CP-E 24/2.5
Data Sheet Power Supply CP-E 24/2.5 Power Supply CP-E 24/2.5 Application The primary switch mode power supply offers two voltage input ranges. This enables the supply with AC or DC. Furthermore it is equipped
More informationElectronic timer CT-EBD.12 Flasher starting with ON with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-EBD.12 Flasher starting with ON with 1 c/o (SPDT) contact The CT-EBD.12 is an electronic time relay with the function flasher starting with ON. It is from the CT-D range.
More informationElectronic timer CT-SDD.22 Star-delta change-over with 2 n/o contacts
Data sheet Electronic timer CT-SDD. Star-delta change-over with n/o contacts The CT-SDD. is an electronic time relay with star-delta change-over. It is from the CT-D range. With their MDRC profile and
More informationElectronic timer CT-ERD.12
2CDC 251 092 F0t06 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied
More informationTM5C12D6T6L compact I/O expansion block TM5-24 I/0-12 DI - 6 DO transistor - 4 AI - 2 AO
Characteristics compact I/O expansion block TM5-24 I/0-12 DI - 6 DO transistor - 4 AI - 2 AO Main Range of product Product or component type Complementary Enclosure material Colour Input/Output number
More informationwarning indication issued about 2 weeks before the battery charge becomes critical Real-time clock - with battery back-up Yes
System Freelance 800F AC 700F Module Description Data Sheet Central Processing Unit PM 783F Detailed data of the CPU (PM 783F) CPU Processor Program memory (Battery backed up) Internal memory Typical cycle
More informationPower supply CP-E 48/1.25 Primary switch mode power supply
Data sheet Power supply CP-E 48/1.25 Primary switch mode power supply The CP-E range offers enhanced functionality while the number of different types has been considerably reduced. Now all power supply
More informationOutput Voltage* (nom.)(adjustable)
Industrial Power Supplies TBLC Series, 6 90 W Low profile case, module depth only 55 mm Suitable for mounting in domestic installation panels Very high efficiency and low standby power -> compliance to
More informationGeneral information. Display. Supply voltage
Data sheet SIMATIC S7-1200, CPU 1211C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 6 DI 24V DC; 4 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 50 KB General information Product
More informationOutput Voltage* (nom.)(adjustable)
Industrial Power Supplies TBLC Series, 6 90 W Low profile case, module depth only 59,5mm Suitable for mounting in domestic installation panels Low output ripples and spikes Fully compliance to ECO-Standard
More informationGeneral information Engineering with Programming package. Display with display. Supply voltage 24 V DC Yes. Input current
Datasheet SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 75 KB General information Engineering
More informationElectronic timer CT-AHD.22
2CDC 251 093 F0t06 a Rotary switch for the preselection of the time range b Potentiometer with direct reading scale for the fine adjustment of the time delay c U: green LED V control supply voltage applied
More informationGeneral information. Display. Supply voltage. Input current
Datasheet SIMATIC S7-1200, CPU 1212C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 8 DI 24V DC; 6 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 50 KB General information Engineering
More informationPower supply CP-D 12/2.1 Primary switch mode power supply
Data sheet Power supply CP-D 12/2.1 Primary switch mode power supply The CP-D range of modular power supply units in MDRC design (modular DIN rail components) is ideally suited for installation in distribution
More informationGeneral information. Display. Supply voltage. Input current. Encoder supply. Output current
Data sheet SIMATIC S7-1200, CPU 1211C, COMPACT CPU, AC/DC/RELAY, ONBOARD I/O: 6 DI 24V DC; 4 DO RELAY 2A; 2 AI 0-10V DC, POWER SUPPLY: AC 85-264 V AC AT 47-63 HZ, PROGRAM/DATA MEMORY: 50 KB General information
More informationGeneral information. Display. Supply voltage
Data sheet SIMATIC S7-1200, CPU 1212C, COMPACT CPU, DC/DC/RLY, ONBOARD I/O: 8 DI 24V DC; 6 DO RELAY 2A; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 75 KB General information Product
More informationGeneral information. Display. Supply voltage. Input current. Encoder supply. Output current
Data sheet *** SPARE PART*** SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 50 KB General
More informationPower supply CP-E 24/0.75 Primary switch mode power supply
Data sheet Power supply CP-E 24/0.75 Primary switch mode power supply The CP-E range offers enhanced functionality while the number of different types has been considerably reduced. Now all power supply
More informationGeneral information. Display. Supply voltage
Data sheet SIMATIC S7-1200, CPU 1211C, COMPACT CPU, DC/DC/RELAY, ONBOARD I/O: 6 DI 24V DC; 4 DO RELAY 2A; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 50 KB General information
More informationDisplay. Supply voltage. Input current. Encoder supply. Output current. Power losses. Memory
Datasheet SIMATIC S7-1200, CPU 1214C, COMPACT CPU, AC/DC/RLY, ONBOARD I/O: 14 DI 24V DC; 10 DO RELAY 2A; 2 AI 0-10V DC, POWER SUPPLY: AC 85-264 V AC AT 47-63 HZ, PROGRAM/DATA MEMORY: 75 KB Display with
More informationRedundancy unit CP-A RU
2CDC 271 010 F0t06 Features Decoupling of CP power supply units with 2 inputs, each up to 20 A per input / channel Output up to 40 A True redundancy by 100 % decoupling of two parallel connected power
More informationModel Number Structure
Solid State Relays with Failure Detection Function G3PC Detects failures in SSR used for heater temperature control and simultaneously outputs alarm signal. This SSR supports the safe design of heater
More informationGeneral information. Display. Supply voltage. Input current. Encoder supply. Output current
Data sheet SIMATIC S7-1200, CPU 1211C, COMPACT CPU, DC/DC/RELAY, ONBOARD I/O: 6 DI 24V DC; 4 DO RELAY 2A; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 50 KB General information
More informationElectronic timer CT-ERS.12 ON-delayed with 1 c/o contact Data sheet
2CDC 251 056 F0t07 Features Rated control supply voltage 24-48 V DC, 24-240 V AC Single-function ON-delay timer One device includes 10 time ranges (0.05 s - 300 h) 1 c/o contact 2 LEDs for status indication
More informationPower supply CP-E 24/10.0 Primary switch mode power supply
Data sheet Power supply CP-E 24/10.0 Primary switch mode power supply The CP-E range offers enhanced functionality while the number of different types has been considerably reduced. Now all power supply
More informationGeneral information. Display. Supply voltage. Input current. Encoder supply. Output current
Data sheet SIMATIC S7-1200, CPU 1211C, COMPACT CPU, DC/DC/RELAY, ONBOARD I/O: 6 DI 24V DC; 4 DO RELAY 2A; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 50 KB General information
More informationG3PC. Model Number Structure. Solid State Relays with Failure Detection Function. Model Number Legend
Solid State Relays with Failure Detection Function G3PC Refer to Warranty and Application Considerations (page 1), Safety Precautions (page 4), and Technical and Safety Information (page 6). Detects failures
More informationGeneral information. Display. Supply voltage. Input current. Encoder supply. Output current
Data sheet SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/RELAY, ONBOARD I/O: 14 DI 24V DC; 10 DO RELAY 2A; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 75 KB General information
More informationDisplay. Supply voltage. Input current. Encoder supply. Output current. Power losses. Memory
Datasheet SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 75 KB Display with display Supply
More informationILBPB24DO32. Inline Block IO Module for PROFIBUS With 32 Digital Outputs. AUTOMATIONWORX Data Sheet 6889_en_04. Description
Inline Block IO Module for PROFIBUS With 32 Digital Outputs AUTOMATIONWORX Data Sheet 6889_en_04 Description PHOENIX CONTACT - 03/2007 & & ' ) The ILB PB 24 DO32 module is designed for use within a PROFIBUS
More informationGeneral information. Display. Supply voltage. Input current. Encoder supply. Output current
Data sheet SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 75 KB General information Engineering
More informationRMCN22BD Analog Converter ma - for Zelio Analog
Characteristics Analog Converter - 4..20 ma - for Zelio Analog Main Commercial Status Range of product Product or component type Analogue input type Analogue output type Commercialised Zelio Analog Voltage/Current
More informationGeneral information. Display. Supply voltage. Input current
Data sheet SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY: 100 KB General information Firmware
More informationGeneral information Engineering with Programming package. Display with display. Supply voltage 24 V DC Yes
Datasheet SIMATIC S7-1200, CPU 1215C, COMPACT CPU, DC/DC/DC, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24V DC; 10 DO 24V DC 0.5A 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY:
More informationILBIB24DO16-DSUB. Inline Block IO Module for INTERBUS With 16 Digital Outputs; Bus Connection via D-SUB Connectors
Inline Block IO Module for INTERBUS With 16 Digital Outputs; Bus Connection via D-SUB Connectors AUTOMATIONWORX Data Sheet 7119_en_02 PHOENIX CONTACT - 03/2007 Description The ILB IB 24 DO16-DSUB module
More informationGeneral information. Display. Supply voltage. Input current. Encoder supply. Output current
Data sheet SIMATIC S7-1200, CPU 1215C, COMPACT CPU, DC/DC/DC, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24V DC; 10 DO 24V DC 0.5A 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA
More informationTM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC A - M8 connector
Characteristics expansion block - TM7 - IP67-8 DI/DO - 24V DC - 0.5 A - M8 connector Main Range of product Product or component type Range compatibility Enclosure material Bus type [Ue] rated operational
More informationRTU511. Binary Output 23BO62. Characteristics. Application. Data Sheet Binary Output 23BO62. The binary output is made via relay contacts.
Binary Output 23BO62 Characteristics The binary output is made via relay contacts. The 8 outputs are potential isolated against the electronic by optocoupler. All 8 outputs have a separate return. Application
More informationTM241C40U controller M IO transistor NPN
Characteristics controller M241 40 IO transistor NPN Main Range of product Product or component type [Us] rated supply voltage 15/12/2018 Modicon M241 Logic controller 24 V DC Discrete input number 24
More informationOTB1E0DM9LP I/O distributed module OTB - Ethernet TCP/IP m
Characteristics I/O distributed module OTB - Ethernet TCP/IP - 0..100 m Main Range of product Product or component type Integrated connection type Mar 31, 2018 Modicon OTB I/O distributed module Discrete
More informationGeneral information. Display. Supply voltage. Input current
Data sheet SIMATIC S7-1200, CPU 1215C, COMPACT CPU, AC/DC/RELAY, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24V DC; 10 DO RELAY 2A, 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: AC 85-264 V AC AT 47-63 HZ, PROGRAM/DATA
More informationTM241C24T controller M IO transistor PNP
Characteristics controller M241 24 IO transistor PNP Main Range of product Product or component type [Us] rated supply voltage Feb 13, 2018 Modicon M241 Logic controller 24 V DC Discrete input number 14
More informationTRIO-DIODE/12-24DC/2X10/1X20
Redundancy module INTERFACE Data sheet 104278_en_00 1 Description PHOENIX CONTACT 20100423 Features TRIO DIODE is the DINrail mountable redundancy module from the TRIO POWER product range. Using the redundancy
More informationGeneral information. Supply voltage. Input current. Encoder supply. Power loss. Memory
Data sheet SIMATIC S7-1200, CPU 1215C, COMPACT CPU, AC/DC/RELAY, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24V DC; 10 DO RELAY 2A, 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: AC 85-264 V AC AT 47-63 HZ, PROGRAM/DATA
More informationPCD3.C90. Date Modification Asked by: Version E/A Bus Connector PCD2.K106 change to PCD3.K106 Müller.R 1.1
Manual PCD3.C90 Revision History Date Modification Asked by: Version 14.09.09 E/A Bus Connector PCD2.K106 change to PCD3.K106 Müller.R 1.1 22.09.09 Added E/A Bus Connector PCD3.K116 Müller.R 1.2 06.01.10
More informationGeneral information. Display. Supply voltage. Input current
Data sheet SIMATIC S7-1200, CPU 1217C, COMPACT CPU, DC/DC/DC, 2 PROFINET PORT ONBOARD I/O: 10 DI 24V DC; 4 DI RS422/485; 6 DO 24V DC; 0,5A; 4 DO RS422/485; 2 AI 0-10V DC, 2 AQ 0-20MA; POWER SUPPLY: DC
More informationGeneral information. Display. Supply voltage. Input current. Encoder supply. Power losses
Data sheet SIMATIC S7-1200, CPU 1215C, COMPACT CPU, DC/DC/RELAY, 2 PROFINET PORT, ONBOARD I/O: 14 DI 24V DC; 10 DO RELAY 2A, 2 AI 0-10V DC, 2 AO 0-20MA DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA
More information6ES7212-1BD30-0XB0. permissible range, lower limit (DC) permissible range, upper limit (DC)
6ES7212-1BD30-0XB0 Page 1 Product data sheet 6ES7212-1BD30-0XB0 SIMATIC S7-1200, CPU 1212C, COMPACT CPU, AC/DC/RLY, ONBOARD I/O: 8 DI 24V DC; 6 DO RELAY 0,5A; 2 AI 0-10V DC, POWER SUPPLY: AC 85-264 V AC
More informationPHOENIX CONTACT - 07/2006
Buffer module with maintenance-free capacitor-based power storage device INTERFACE Data sheet 102035_03_en PHOENIX CONTACT - 07/2006 Description Short-term mains interruptions are bridged by QUINT BUFFER,
More informationElectronic timer CT-ERS.21
2CDC 251 057 F0t07 Features Rated control supply voltage 24 240 V AC/DC Single function ON delay timer One device includes 10 time ranges (0.05 s 300 h) 2 c/o contacts 2 LEDs for status indication Width
More information4.8 Digital Input/Output Module 07 DC 92 Contents Intended purpose Displays and operating elements on the front panel Electrical connection
4.8 Digital Input/Output Module 07 DC 9 3 configurable digital inputs/outputs, 4 V DC, electrically isolated in groups, outputs can be loaded with 500 ma, CS31 system bus 1 3 4 1 Fig. 4.8-1: Digital input/output
More informationGeneral information Engineering with Programming package. Display with display
Datasheet SIPLUS S7-1200 CPU 1212C AC/DC/RLY -40... +70 DEGREES C WITH CONFORMAL COATING BASED ON 6ES7212-1BE31-0XB0. COMPACT CPU, AC/DC/RELAY, ONBOARD I/O: 8 DI 24V DC 6 DO RELAY 2A 2 AI 0-10V DC, POWER
More informationElectronic timer CT-SDS.23 Star-delta change-over with 2 n/o contacts
Data sheet Electronic timer CT-SDS. Star-delta change-over with n/o contacts The CT-SDS. is an electronic timer from the CT-S range with Star-delta change-over and 7 time ranges. All electronic timers
More informationSwitching relay CT-IRE with 1 c/o (SPDT) contact
Data sheet Switching relay CT-IRE with 1 c/o (SPDT) contact The CT-IRE is a switching relay from the CT-E range. The CT-E range is the economic range of ABB s time relays and offers a cost effective price-performance
More informationOTB1S0DM9LP I/O distributed module OTB - Modbus non isolated serial link m
Characteristics I/O distributed module OTB - Modbus non isolated serial link - 0..10 m Complementary Topology Bus length Main Number of devices per segment 0...32 Data format Parity Discrete input voltage
More informationContact protection relay
Contact protection relay Ordering details SVR 450 08 F0000 The protects sensitive control contacts from excessive load. It can be used with latching function or without. Bounce time of control contacts
More informationElectronic timer CT-ARE OFF-delayed without auxiliary voltage, 1 c/o (SPDT) contact
Data sheet Electronic timer CT-ARE OFF-delayed without auxiliary voltage, 1 c/o (SPDT) contact The CT-ARE is an electronic time relay with OFF-delay. It is from the CT-E range. The CT-E range is the economic
More informationTM3AI4 module TM3-4 analog inputs
Characteristics module TM3-4 analog inputs Main Range of product Product or component type Range compatibility Analogue input number 4 Analogue input type Complementary Analogue input resolution Permissible
More informationVoltage Current Front-mounting bracket
Switching Power Supply S8PS Compact DIN-Rail Mounting Industrial Power Supplies with Capacities Up to 600 W Models range from 0 W to 600 W. Universal input: voltage range 0 to 240 VAC. Power Factor Correction
More informationPHOENIX CONTACT - 08/2009. Features. DANGER OF EXPLOSION! Only remove equipment when it is disconnected and not in the potentially explosive area.
Primary-switched power supply for building automation INTERFACE Data sheet 103505_en_02 1 Description PHOENIX CONTACT - 08/2009 Features STEP POWER power supply units for building automation The new STEP
More informationGeneral information. Display. Supply voltage. Input current
Data sheet SIMATIC S7-1200F, CPU 1214 FC, COMPACT CPU, DC/DC/DC, ONBOARD I/O: 14 DI 24V DC; 10 DO 24 V DC; 2 AI 0-10V DC, POWER SUPPLY: DC 20.4-28.8 V DC, PROGRAM/DATA MEMORY 125 KB General information
More informationPower Supply, Primary Switch Mode, Narrow Design MINI-PS AC/24DC/1
Power Supply, Primary Switch Mode, arrow Design -PS-100-240AC/24/1 POWER provides: Extra narrow widths of 22.5, 45, and 67.5 mm (0.886, 1.772, and 2.657 in.) Global use due to a wide range input A high
More informationElectronic timer CT-ARS.11
2CDC 251 088 F0t07 Features Rated control supply voltage 24 240 V AC/DC Single function OFF delay timer without auxiliary voltage One device includes 7 time ranges (0.05 s 10 min) 1 c/o (SPDT) contact
More information