Software of BEWITHSTATE

Size: px

Start display at page:

Download "Software of BEWITHSTATE"

Preston Mathews
5 years ago
Views:

1 BEWITHSTATE

Software of BEWITHSTATE MENU 1. File Makes new file. Opens the existing file. Displays a dialog box for specifying a data file to read.

Setting Loads the Xover-Time Alignment data and Equalizer data which are set up on the computer to the BEWITHSTATE.

Stores the Installation data and System Information data of the BEWITHSTATE to the computer. Displays a dialog box for specifying a COM(communication) port.

2 Software of BEWITHSTATE MENU 1. File Makes new file. Opens the existing file. Displays a dialog box for specifying a data file to read. Displays a dialog box for specifying where to save a data file. Overwrites a data file. Saves a data file as an Excel file. Terminates the software. 2. Setting Loads the Xover-Time Alignment data and Equalizer data which are set up on the computer to the BEWITHSTATE. Stores the Xover-Time Alignment data and Equalizer data of the BEWITHSTATE to the computer. Loads the Installation data and System Information data to the BEWITHSTATE. Stores the Installation data and System Information data of the BEWITHSTATE to the computer. Displays a dialog box for specifying a COM(communication) port. When more than 2 COM ports are displayed, select the port of larger number. (in case of the diagram shown to the right, choose COM3) When connecting more than 2 BEWITHSTATEs, connect the main unit [UNIT No.1] Please note that the smaller port number is not always for the main unit, when connecting more than 2 BEWITHSTATEs at the same time.

Resets the Equalizer data of shown preset number back to "None".

3 3. Edit Copies the selected preset data. Pastes the copied preset data on another preset. Resets the Equalizer data of shown preset number back to "None". Xover-Time Alignment setting will NOT be reset. 4. Preset 1 Choose one from 5 Preset data. 5. About Displays a version of the software.

4 Installation Name of a dealer of a car Name of a installer / technician / No. of the car Name of a customer Grade of the car Age of the customer Year of the car The number of doors Music preference of the customer of tweeters of midwoofer of tweeters of midwoofer of subwoofer of subwoofer Qty of amplifier of amplifier of amplifier of amplifier of amplifier of amplifier Enter " 1 " when connecting the main unit, and enter "2, 3, 4..." when connecting the sub units. Enter the quantity of the BEWITHSTATE connected. Enter the distance from the listening point to the farthest speaker unit. Use a passive networks. Use passive networks in bi-amplification. No passive network is used. Car with right-steering When using no MM-1 Car with left-steering When using MM-1 Stores data of the Installation and the System Information to the computer. Loads data fo the Installation and the System Information to BEWITHSTATE.

System Information Cable size Cable size from TW to the left ear from TW to the right ear Cable size Cable size from MW to the left ear capacity port length port diameter from MW to the right ear

5 System Information Cable size Cable size from TW to the left ear from TW to the right ear Cable size Cable size from MW to the left ear capacity port length port diameter from MW to the right ear output voltage capacity port length port diameter TW/ENCLOSURE Choose the installation method. Attached enclosure G-50 Free air TW/POSITION Choose the installation location. MW/DISTANCE Enter the distance between the TW and the ears (L: Left, R: Right). MW/BAFFLE Choose the installation methodfrom Free air or Enclosure. With the Enclosure, choose Sealed type or Bass-reflex type. MW/BAFFLE/ENCLOSURE Enter a port length and port diameter of the enclosure. With the sealed enclosure, input only a capacity.

7 Speaker installation chart - System Information - DISTANCE TW MW L EAR R EAR ANGLE L R FRONT -3 3 TW -45 REAR DIRECTION L R L R TW 9-9 MW

Choose both L and R distance between the units and ears. Choose the Cut-off frequency for High and Low Pass.

8 Xover-Time Alignment Choose the distance between the unit and an ear for each L and R. Choose the Cut-off frequency for each L and R of High and Low Pass. Choose both L and R distance between the units and ears. Choose the Cut-off frequency for High and Low Pass. Change over the phase. Mute on/off Stereo output Monaural output Choose the left and right level for each L and R Choose the left and right level for both L and R Loads the adjusted data to the BEWITHSTATE.

Choose the frequency level for each L and R. Choose the frequency level for both L and R.

9 Equalizer Click theon the right upper corner to display the adjustment window. Choose the equalizing frequency for each L and R. Choose the equalizing frequency for both L and R. Choose the frequency level for each L and R. Choose the frequency level for both L and R. SORT Sort in ascending order according to frequency. LOAD Load the Equalizer data which is set up on the computer to the BEWITHSTATE. Choose "Preset Clear" on Edit(E) to reset the Equalizer setting when starting over.

10 BEWITHSTATE Remote Control Instruction manual for Remote Control POWER ON /OFF Press STOP botton (less than 2 seconds) for source change mode. The order of source change is as follows. Source change to MM-1 Source change (Press once (less than 2 seconds)) PRESET change (Hold (for more than 2 seconds)) When using no MM-1, The change is effective 2 seconds after the selection. Hold STOP botton (more than 2 seconds) for DSP PRESET mode. Volume adjustment The order of PRESET change is as follows. The change is effective 2 seconds after the selection. Replacement of battery / Handling of Remote Control Do not expose remote control to direct sunlight or high temperature. Face the remote sensor toward BEWITHSTATE s remote sensor window for control. Direct sunlight will not enable the remote control to work properly. Do not charge remote control battery. It may cause the battery fluid discharge. If battery fluid discharges, clean the battery fluid and replace a new battery. Replace the battery to a new battery when the remote control is ineffective. 2. Place the battery + facing up. We are not responsible for any loss of setup data or damages of equipment that may occur from improper use or installation. 1. Insert the tip of the pen into the slot of battery case and pull down towards a arrow mark. 3. Push battery case into remote control. The battery is not covered by warranty. Please use a coin cell battery(cr2025) for replacement.

PA-85 OPERATION MANUAL

Hamilton PA-85 OPERATION MANUAL SPECIFICATIONS AMPLIFIER Power supply: AC120V/60Hz built-in 3x6V 7A rechargeable batteries Frequency response: 35-20000Hz SPL: db(1w/m) T.H.D.: