CONTENTS. lmportants Safety Instructions IMPORTANT SAFETY INSTRUCTIONS PACKAGE LIST FUNCTIONS DESCRIPTIONS PRODUCTS INSTRUCTIONS

Size: px

Start display at page:

Download "CONTENTS. lmportants Safety Instructions IMPORTANT SAFETY INSTRUCTIONS PACKAGE LIST FUNCTIONS DESCRIPTIONS PRODUCTS INSTRUCTIONS"

Joleen Charles
5 years ago
Views:

2 CTENTS lmportants Safety Instructions IMPORTANT SAFETY INSTRUCTIS 1 PACKAGE LIST 2 FUNCTIS DESCRIPTIS 3 PRODUCTS INSTRUCTIS 4-5 CNECTIS INSTRUCTIS 6-9 TROUBLESHOOTING 9 FCC ADVISORY 10 PARAMETERS Do not use this device near Water 2. Do not install near any heat sources such as radiators, heat register, stoves, or other devices that produce heat 3. Do not defy the safety purpose of the polarized grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug had two blades and a third grounding prong. The wide blade or third prong is provided for your safety. lf the provided prong does not fit your outlet, consult an electrician for possible replacement of obsolete outlet. 4. Portect the power cord from being walked on or pinched, particularly at plugs, receptacles and or the point where they exit from the device. 5. Only use attachments accessories specified or included 6. Unplug this device during lightning storms or when not in use for prolonged periods 7. Refer any or all servicing to quality service center or personel. Servicing is required when the device has been damaged to a point of malfunctions, such as liquid spillage, exposure to rain, moisture, excessive heat or dropping of the device. 1

3 Package list PDWMKHRD22WM PARAMETERS Main Device Wired Mic Wireless Mic User Manual Battery 3.5/3.5mm Cable 3.5/2RCA Cable HDMI input and output: HDMI 1.4 Wireless frequency range: UHF THD: 0.5% Signal/Noise ratio: -90dB Frequency response: 30Hz~18kHz ±3dB Operating range: Over 100ft Typical Tone control: 10kHz Microphone max. Gain: +26dB Wired microphone input impedance: 22kΩ Stereo line input impedance: 10kΩ Power: 5V DC UHF Wireless microphone Transmitting Power: 10dBm Modulation: FM Max Modulation: 75 KHz Spurious Emission: >60dB Power Supply: 3V (2 'AA' Batteries) PDWMKRHD20 PARAMETERS Main Device (1pc) Wired Mic (2pcs) or Wireless Mic (2pcs) Power Adaptor 1 pc 3. Smm/3. 5mm Audio Cable 1pc 3. 5mm/2RCA Audio Cable 2pcs AA Dry Battery (4pcs) for wireless mic only PDWMKRHD20 with 2 wired mic PDWMKHRD22WM with 2 wireless mic 2 HDMI input and output: HDMI 1.4 THD: 0.5% Signal/Noise ratio: -90dB Frequency response: 30Hz~18kHz ±3dB Typical Tone control: 10kHz Microphone max. Gain: +26dB Wired microphone input impedance: 22kΩ Stereo line input impedance: 10kΩ Power: 5V DC Wired Microphone Mic Element: Dynamic Directivity: Uni-directivity Frequency Response: 60-15KHz Sensitivity: -75dB±3dB Impedance: 600Ω 11

4 FCC ADVISORY (USA) 1. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correcting the problem by one or more of the following measures: Increasing the distance between the radio/tv equipment and the main device Connecting the radio/tv equipment to an outlet on a different circuit than the one into which the receiver is plugged. If necessary, consulting the dealer or an experienced radio/tv technician for help. 2. IMPORTANT: When connecting the main device to audio equipment, use only high-quality, shielded cables such as what is supplied with this product. Follow all installation instructions and do not modify the equipment in any way, as this could void your FCC authorization to use the device in the U.S. 10 Functions (PDWMKHRD22WM) HDMI Outputs to connect to LCD TV, Media speaker, etc. 3.5mm stereo outputs to connect to amplifier, Computer, etc. HDMI Inputs to connect to HD player, Set-Top Box, etc. 3.5mm stereo inputs connect to CD player, Smart phone, atc. Main unit with 2 microphone inputs for wired microphones Adjustable echo level for all microphones Adjustable tone control for all microphones Big rotary knob for control music volume Front panel with led light, red light to indicate the power status, blue light to indicate the wireless microphone status., rotary knob simultaneously control wired & wireless microphone volume 2 UHF wireless microphones are included, powered by 2pcs 2A battery Functions (PDWMKRHD20) HDMI Outputs to connect to LCD TV, Media speaker, etc. 3.5mm stereo outputs to connect to amplifier, Computer, etc. HDMI Inputs to connect to HD player, Set-Top Box, etc. 3.5mm stereo inputs connect to CD player, Smart phone, etc. Main unit with 2 microphone inputs for wired microphones Adjustable echo level for all microphones Adjustable tone control for all microphones Big rotary knob for control music volume Front panel with led light, red light to indicate the power status., rotary knob simultaneously control wired & wireless microphone volume 2 wired microphones are included 3

5 PRODUCT INSTRUCTIS 7. Connect with HDMI Blue-Ray Player and TV Front Panel Music Volume MIC Volume Echo Tone + LED MIC Input Rear Panel HDMI Input 3.5mm Input HDMI Output 3.5mm Output 4 Power Switch DC: 5V Troubleshooting If you are having problems operating the HDMI karaoke player, or suspects something is wrong with it, please check the troubleshooting list below to resolve any issues of incorrect operation. If you suspect an equipment malfunction and are unable to resolve the problems, please contact the service center. 1. No light on power indicator Solutions: Check the power adaptor and cable 2. Power indicator is lit but no sound is present. Solutions: Check the source device and disable any mute settings. 3.Sound is harsh or distorted. Solutions: Reduce source volume Change placement angle between Mic and speaker Change distance between Mic and Speaker 9

6 5. Small Meeting Connection Wired Microphone / Switch 6.35 Plug Cable (3M) Wireless Microphone 6.Connect with HDMI Amplifier & Notebook LED Indicator /MUTE/ Battery Lid 8 5

7 Connection instructions 1. PC Karaoke Mode (Desktop PC & Notebook PC) 3. Connect with TV & DVD player DVD Video Out TV Video In 4. Connect with Mobilephone & MID 2. Sound Mode 6 7

C ookie User Manual BC

C ookie User Manual BC Cookie User Manual BC Cookie Please follow the instruction in this guide to enjoy the best sound. Cookie User Manual Hold "O" button to power on and off Press "O" button to play/pause music (for compatible