Prisma Plus System P Cubicles up to 4000 A
|
|
- Roberta Perkins
- 5 years ago
- Views:
Transcription
1 Low Voltage electric distribution Prisma Plus System P Cubicles up to 4000 A Catalogue 2012
2 Presentation PD390180_SE.eps IP30/31/55 cubicles b Applications: v indoor cubicles for main or subdistribution low-voltage switchboards for commercial and industrial applications v supplied in kit form, can be combined side-by-side and back-to-back b In (A): 4000 A b Degree of protection: v IP30: with IP30 cover panels including a door or a cover frame v IP31: with IP30 cover panels including a door + gasket v IP55: with IP55 cover panels b Degree of protection against mechanical impacts: v IK07 with cover frame v IK08 (with IP30 door) v IK10 with IP55 door b Framework dimensions: v four widths: - W = 300: cable compartment - W = 400: cable compartment or device compartment - W = 650: device compartment or cable compartment - W = 800: device compartment with busbar compartment or cable compartment v two depths: 400, 600 mm v height: 2000 mm. 25
3 Presentation Electrical switchboards up to 4000 A PD eps The Prisma Plus functional system The Prisma Plus functional system can be used for all types of low-voltage distribution switchboards (main, subdistr bution and final) up to 4000 A, in commercial and industrial environments. Switchboard design is very simple. A metal structure The switchboard is made up of one or more frameworks combined side-by-side or back-to-back, on which a complete selection of cover panels and doors can be mounted. A distribution system Horizontal busbars or vertical busbars positioned in a lateral compartment or at the rear of the cubicle are used to distr bute electricity throughout the switchboard. Complete functional units Each device is part of a functional unit comprising: b a dedicated mounting plate for device installation b a front plate to block direct access to live parts b prefabricated busbar connections b devices for on-site connections. Each functional unit contributes to a function in the switchboard. The functional units are modular and are arranged rationally, one on top of another, within the enclosure. The system includes everything required for functional unit mounting, supply and onsite connection. The components of the Prisma Plus system and those of the functional units in particular have been designed and tested taking into account device characteristics. This design approach ensures a high degree of reliability in system operation and optimum safety for personnel. PD390150_SE_R.eps Functional units are arranged rationally, one on top of another. 26
4 Presentation Electrical switchboards up to 4000 A PD390381_SE.eps Prisma Plus enclosures b Steel sheet metal b Electrophoresis treatment + hot-polymerised polyester epoxy powder, white colour RAL 9001 b Can be dismantled b Can be combined side-by-side and back-to-back b Degree of protection: v IP30: with IP30 cover panels including a door or a cover frame v IP31: with IP30 cover panels including a door + gasket v IP55: with IP55 cover panels b Degree of protection against mechanical impacts: v IK07: with cover frame v IK08: with IP30 door v IK10: with IP55 door b Framework dimensions: v four widths: - W = 300: cable compartment - W = 400: cable compartment or device compartment - W = 650: device compartment or cable compartment - W = 800: device compartment with busbar compartment or cable compartment v two depths: 400, 600 mm v height: 2000 mm b Indoor cubicles. Advantages of Prisma Plus switchboards Electrical characteristics A dependable electrical installation The total compat bility of Schneider Electric devices with the Prisma Plus system is a key advantage in ensuring a high level of installation dependability. System design has been validated by type tests as per standards IEC and 2 and benefits from the combined experience of Schneider Electric customers over many years. An upgradeable electrical installation Thanks to modular design, Prisma Plus switchboards can be modified easily to integrate new functional units as needed. Maintenance operations, carried out with the switchboard de-energised, are fast and straight-forward due to easy access to devices. Total safety for personnel Work in a switchboard must be carried out by authorised persons in compliance with all applicable safety regulations. To increase the safety of personnel, devices are installed behind protective front plates; only the operating handles are accessible. Additional internal protection (partitions, barriers) is available to create form 2, 3 or 4 separation to protect against direct contacts with live parts. Terminal shields are mandatory for installation of Compact NSX and INS/INV devices in Prisma Plus enclosures. Electrical switchboards built using the Prisma Plus functional system and Schneider recommendations fully comply with international standards IEC and 2. Use of the components in the Prisma Plus functional system ensures the creation of switchboards complying with standards IEC 50298, EN 50298, IEC and 2, EN and 2, as well as local versions with the following electrical characteristics: b rated insulation level of main busbars: 1000 V b InA (A): 3520 A b rated peak withstand current Ipk: 220 kâ b rated short-time withstand current Icw: 100 ka rms / 1 second b frequency: 50/60 Hz. 27
5 Presentation Examples of switchboard configurations Incomer Compact NS1000 4P Fixed, front connection via Canalis PD390398_SE_R.eps Distribution Linergy busbars Outgoing devices Compact NSX250 Horizontal Fixed, front connection Compact NSX400 Horizontal Fixed, front connection Multi 9 or Acti 9 devices Cable running Prefabricated connection Transferred to cable compartment, W = 300 mm Prefabricated connection Transferred to cable compartment, W = 300 mm Comb busbars Cable straps Trunking Terminal block at bottom of cubicle Motor protection devices Comb busbars Cable running Cable straps Trunking Terminal block in the cable compartment, W = 300 mm Enclosure Cubicle for devices Cable compartment W = 800/650 mm D = 400 mm W = 300 mm D = 400 mm PD eps 32
6 Presentation Examples of switchboard configurations Incomer Masterpact NT1000 3P Drawout, front connection via Canalis PB eps Distribution Linergy busbars Outgoing devices Compact NSX250 Vertical Fixed, front connection Compact NSX250 Horizontal Fixed, front connection Compact NSX400 Horizontal Fixed, front connection Multi 9 or Acti 9 devices Cable running Polypact distribution block Direct via cables Prefabricated connection Transferred to cable compartment, W = 400 mm Prefabricated connection Transferred to cable compartment, W = 400 mm 80 A Multiclip Comb busbars Cable straps Trunking Terminal block in the cable compartment, W = 300 mm Motor protection devices Cable running Cable straps Trunking Terminal block in the cable compartment, W = 300 mm PD390407_SE_R.eps Enclosure Cubicle for devices Cable compartment W = 800/650 mm D = 400 mm W = 300/400 mm D = 400 mm 33
7 Examples of switchboard configurations Dd EPS Presentation Outgoing devices Incomer Masterpact NW32 4P (1) Fixed Upstream terminals: front connection Downstream terminals: vertical rear connection via cables from the bottom Distribution Vertical Linergy busbars Horizontal Linergy Evolution busbars Enclosure Cubicle for devices W = /800 mm D = 1000 mm (1) For mounting a NW40, provide for a dedicated cubicle. Compact NSX250 Vertical Fixed, rear connection Compact NSX250 Horizontal Fixed, rear connection Compact NSX400 Horizontal Fixed, rear connection Multi 9 or Acti 9 devices Cable running Motor protection devices Cable running Polypact distribution block Direct via cables Prefabricated connection Direct via cables Prefabricated connection Direct via cables 200 A Multiclip Trunking Comb busbars Cable straps 35
8 Distribution Form 1 electrical switchboards Main distribution Presentation Decisions concerning the Form of separation and the degree of protection are the subject of an agreement between the manufacturer and the user. Form 1 configuration Covering of upstream and downstream terminals on all devices. DD eps In most installations, Prisma Plus cubicles do not require partitioning. In this case, the switchboard is a Form 1. Safety being one of its foremost goals, Schneider Electric offers options and features that go well beyond the recommendations of the standard. The protection of life and property is a standard feature due to: b front plates that require a tool to be removed b keylocks on doors, some of which provide access to live parts b the systematic installation of terminal shields on Compact NSX circuit breakers and Interpact INS and INV switch-disconnectors b covering of the upstream and downstream terminals on the incoming device so that operators are perfectly safe at all points in the switchboard when the incoming device is off (open). What is more, Prisma Plus offers different levels of partitioning to create separations inside the cubicles and thus create Form 2, 3 and 4 electrical switchboards. Electrical switchboards must meet the degree of protection IP2X to comply with standard IEC and 2. Dd eps Covering of the connection between an incoming device and lateral busbars The protection of life and property is ensured by: b the systematic installation of terminal shields on Compact NSX circuit breakers and on Interpact INS and INV switch-disconnectors (see the pages on the functional units) b covering of the upstream and downstream terminals of the incoming device. Cat. no. selection Device Cover Masterpact NW Masterpact NT Compact NS630b/ Compact NS1600b/3200 (1) Interpact INS-INV630b/ (1) For more informations, see page A B-34
9 Form 3 partitioning Distribution Main distribution Definition of Form 3 Separation of busbars from the functional units and separation of all functional units from one another. Separation of the terminals for external conductors from the functional units, but not from each other. b protection against contact with live parts b reduction in the risk of faults between the functional units (propagation of electrical arcs, etc.). Dd eps Dd eps The two types of Form 3 separation as defined by IEC and 2. Form 3a. Form 3b. Form 3a Terminals for external conductors not separated from busbars. The functional units are separated from each other and from the busbars, but not the terminals. b Form 3b Terminals for external conductors separated from busbars. The functional units are separated from each other and from the busbars. The terminals are separated from the busbars, but not from each other. Form 3 configuration Prisma Plus offers Form 3b because it provides much better safety than Form 3a, because the terminals are separated from the busbars. DD eps Form 2 switchboard with: b separation of the functional units from one another b separation of the terminals for external conductors from the functional units. Form 3b partitioning. B-40
10 Enclosures IP30/31/55 cubicles Presentation Carefully designed in every detail, Prisma Plus cubicles are the solution for all common switchboard configurations up to 4000 A. A reduced number of catalogue numbers facilitates selection, while offering the essential functions such as: b multiple combination possibilities b an array of interchangeable cover panels and doors, IP30 or IP55, without adding gaskets b total access bility to all connection points in the switchboard b wide cable compartments b high for large capacity (36 modules, each 50 mm high).the discreet design, with simple lines and oval shapes in the RAL 9001 colour, mean Prisma Plus cubicles blend in naturally on all commercial and industrial sites.they offer 36 modules, each 50 mm high, of useful space. They comply with standard EN PD eps All cover panels and doors (IP30 or IP55) are secured using quarter-turn fasteners.electrical continuity is achieved naturally, without having to add clips or earthing braids. C-2
11 Enclosures IP30/31/55 cubicles Presentation DD eps Frameworks can be combined side-by-side or back-to-back to create all switchboard configurationsup to 3200 A. DD eps Front plates are installed on a frame that can pivot on the framework. The front can be: b a plain door (IP30/55) b a transparent door (IP30/55) b a cover frame (IP30). C-3
12 Enclosures IP30/31/55 cubicles Presentation PD390573R.eps The framework The framework is both light and rigid due to the closed sections used for the uprights. The compact design of the framework means there is 15 % more space available for devices. There are no sharp edges. Assembly is particularly fast with only 12 screws, all directly accessible. Uprights have wing holes every 25 mm. A measuring tape can be hooked to a slot marking the starting point for measurements on the heights required to mount devices. Marks every 50 mm and double marks every 100 mm make it easy to count modules.the floor fixing kit can also be used to level the cubicles. PD390574R.eps PD390575R.eps Cross-pieces can be removed to facilitate work. Only 12 screws, all directly accessible, are required for assembly. Marks make it easy to count the vertical modules. PD390576R.eps The floor fixing kit can also be used to level the cubicles. PD eps The front plates are equipped with clip-mount grips with a built-in quarter-turn fastening system for fast handling and installation.the lead-sealing function is directly integrated in the grip mechanism. Hinged front plate support frame This frame provides direct and fast access to the devices. It is revers ble and has two factory-mounted hinges. Only two screws are required to secure it to the framework. By pivoting, the front plate support frame provides direct access to devices. C-4
13 Enclosures IP30/31/55 cubicles Presentation D400 frameworks (depth 400 mm) DD eps DD eps DD eps DD eps DD eps W = 300/400 W = 650/800 W = 800 with a busbar compartment Dimensions of cubicle with cover panels Height 2006 mm (capacity = 36 modules, each 50 mm high) Width Width of he framework + 56 mm Depth 450 mm with screw-on rear panel + front door 476 mm with front and rear doors D600 frameworks (depth 600 mm) DD eps DD eps DD eps DD eps DD eps W = 300/400 W = 650/800 W = 800 with a busbar compartment Dimensions of cubicle with cover panels Height 2006 mm (capacity = 36 modules, each 50 mm high) Width Width of he framework + 56 mm Depth 650 mm with screw-on rear panel + front door 676 mm with front and rear doors DD eps Framework combinations Side-by-side The 650 and 800 mm wide frameworks are supplied with a combination kit. To maintain the IP55 degree of protection, an optional gasket must be installed between the combined cubicles. Back-to-back An optional kit for back-to-back combinations is available. It is used to mechanically connect the frameworks. It is supplied with a gasket to be installed between the cubicles (for IP55). DD eps C-6
14 Enclosures IP30/31/55 cubicles Presentation Cover panels Front panels b for frameworks 650 and 800 mm wide. Any of the following can be installed in front of the hinged front plate support frame: v a plain door (IP30 or IP55) v a transparent door (IP30 or IP55) v a cover frame (IP30) b for frameworks 300 and 400 mm wide. A plain door is used (IP30 or IP55). Rear panels The rear panel can be made up of: b two parts for IP30 panels b one reinforced part for IP55 panels. A plain door can also be used, notably for switchboards with rear connections (800 and 1000 mm deep). Side panels A set of two panels is used (IP30 or IP55). If frameworks are installed back to back (double depth), two sets of two panels are required. Roof There is a plain roof (IP30 or IP55) for each size of framework. Gland plates They are mandatory, whatever the desired degree of protection for the switchboard. For each size of framework, there are plain gland plates (IP55) or two-part gland plates (IP30). DD eps Degree of protection IP30 switchboard Use: b the IP30 cover panels with a door or cover frame b IP30 plain roof b gland plates (plain or in two parts). IP31 switchboard Use: b the IP30 cover panels with a door b IP30 plain roof b IP31 sealing kit b gland plates (plain or in two parts). IP55 switchboard Use: b the IP55 cover panels with a door b IP55 plain roof b plain gland plates. If frameworks are combined, use the IP55 sealing kit for side-by-side combinations. DD eps Prisma Plus cubicle, W = 650 mm + cable compartment, W = 300 mm. Prisma Plus cubicle, W = 800 mm + cable compartment, W = 300 mm. C-7
15 Enclosures Cubicles Frameworks DD eps 400 mm deep framework DD eps DD eps DD eps Framework width Cat. no. W = 300 mm W = 400 mm W = 650 mm W = 800 mm W = 800 mm ( ) b composition of catalogue numbers: v two frames (with two additional uprights for W = mm cubicles for the v mounting plates and to separate the busbar compartment) v four cross-pieces v mounting hardware v side-by-side combination kit b for the 800 mm width, the busbar compartment can be on the left or right b cubicles can be combined side-by-side and back-to-back b can be equipped with IP30 or IP55 cover panels. DD eps 600 mm deep framework DD eps DD eps DD eps Framework width Cat. no. W = 300 mm W = 400 mm W = 650 mm W = 800 mm W = 800 mm ( ) b composition of catalogue numbers: v two frames (three for W = mm cubicles), equipped with intermediate v uprights for the mounting plates v four cross-pieces v mounting hardware v side-by-side combination kit b for the 800 mm width, the busbar compartment can be on the left or right b cubicles can be combined side-by-side and back-to-back b can be equipped with IP30 or IP55 cover panels. DD eps Hinged front plate support frame Dd eps Designation Cat. no. Hinged front plate support frame, W = 400mm (1) Hinged front plate support frame, W = 650mm (2) (1) Replaces catalogue number (2) Replaces catalogue number b reversible for left or right-hand opening b secured at two points b can be mounted on 650 mm and 800 mm ( ) wide cubicles (1) (2). C-12
Low Voltage electrical distribution Catalogue Prisma PH
Low Voltage electrical distribution Catalogue 2014 Prisma PH Prisma PH Contents Index 2 Electrical switchboards... Up to 4000 A 4 Prisma PH functional system 6 Switchgears 7 Linergy LGYE 8 Horizontal
More informationCatalogue G System Pack, wall mount and floor standing enclosures. Prisma Plus LV Switchboards Devised to save time
Catalogue G System Pack, wall mount and floor standing enclosures Prisma Plus LV Switchboards Devised to save time General contents Index 2 General presentation 8 Pack 10 17 General presentation Installation
More informationBuild electrical installations more efficiently. Prisma Plus P Simple, functional systems for safe, upgradeable LV switchboards up to 3200 A
Build electrical installations more efficiently Prisma Plus P Simple, functional systems for safe, upgradeable LV switchboards up to 3200 A Develop your business efficiency w Switchboards that are safe
More informationBuild electrical installations more efficiently. Prisma G Simple, functional systems for safe, upgradeable LV switchboards up to 630 A
Build electrical installations more efficiently Prisma G Simple, functional systems for safe, upgradeable LV switchboards up to 630 A Develop your business efficiency wit Switchboards that are safe With
More informationXL 4000 metal free-standing enclosures and cable compartments
87045 LIMOGES Cedex Telephone : 05 55 06 87 87 Fax : 05 55 06 88 88 XL metal free-standing enclosures and CONTENTS PAGE 1. General characteristics...1 2. Range...2 3. Overall dimensions...2 4. Equipment...3
More informationLow Voltage Catalogue Prisma G. Wall-mounted and floor standing enclosures for Electrical Distribution up to 630 A
Low Voltage Catalogue 2013 Prisma G Wall-mounted and floor standing enclosures for Electrical Distribution up to 630 A Overview To respond to increasing building requirements Improve the continuity of
More informationSivacon S4. Low-Voltage Switchboards. siemens.co.uk/tip
Product Managers and dedicated Business Development Managers are available to assist with all your enquiries. Technical presentations (Forms of Separation, Discrimination etc) available Site response capability
More informationCompact NS 100/400 in the duct Interpact INS 250/400 in the duct Interpact INV 250/400 in the duct
push to trip Io Ir.8.9.9.93.7 1.88.95.63.85.98.5.8 1 Ir Im xin xio Ir Im a a.7.63.5.8.9 1 xin Io push to trip Ir.9.93.88.95.85.98.8 1 xio alarm 90 105 alarm 90 105 Im 5 6 4 7 3 8 2 10 xir Im 5 6 4 7 3
More informationPan assemblies and installation accessories
Contents Section 10 Pan assemblies and installation accessories SP&N pan assemblies 124 SP&N door and cover 124 TP&N pan assemblies 125 TP&N door and cover 125 Multiclip busbar and Polybloc 126 Comb busbars
More informationLow voltage. NG to 160 A. Modular incoming circuit breakers and switch-disconnectors for DIN-panel installation.
Low voltage NG160 16 to 160 A Modular incoming circuit breakers and switch-disconnectors for DIN-panel installation Catalogue 2010 NG160 circuit breaker Ready to install NG160 General contents Presentation
More informationMulti 9 switchgear NSA, INS, NG125
N interpact INS 125 5 8 I. ON Installation and connection in the switchboard Multi 9 switchgear NSA, INS, NG125 051279-70% Description of device number per row (modules = 9 mm) E37025(MGA+BT) Multi 9 switchgear
More informationIEC & 2 standard. The reference for safe and reliable LV switchboards
IEC 61439-1 & 2 standard The reference for safe and reliable LV switchboards IEC61439-1 & 2 The power of a standard adapted to your needs IEC standards are today legal or market references. The new IEC
More informationMerlin Gerin LV switch-disconnectors Interpact 40 to 2500A
erlin Gerin LV switch-disconnectors Interpact 40 to 2500A 2 LV switch-disconnectors Interpact from 40 to 2500 A 4 Typical low-voltage applications 6 Compact from 80 to 1250 A 7 asterpact from 800 to 6300
More informationmodular enclosure MUREVA, IP65 weatherproof & versatile enclosures aesthetics multi-functional evolutionary ergonomics and time saving security
aesthetics c Elegant and robust design. c Colour easy to integrate in any environment. weatherproof & versatile enclosures multi-functional c Different solutions for: industrial control, electrical distribution,
More informationInnovation on Medium Voltage Switchgear
Bruno Rivas, Guarulhos - Brazil, April 2015 Jornadas Técnicas de ABB en Chile Innovation on Medium Voltage Switchgear May 13, 2015 Slide 1 Application 13. Mai 2015 Slide 2 PPMV Brazil Factory Unigear Insourcing
More informationAir-insulated medium-voltage secondary distribution switchgear
DISTRIBUTION SOLUTIONS Air-insulated medium-voltage secondary distribution switchgear Compact size Complete solution Factory tested Air-insulated medium-voltage secondary distribution switchgear The ABB
More informationE-KAB N E SERIES WALL- MOUNTED DISTRIBUTION SWITCHBOARDS
E-KAB N E SERIES WALL- MOUNTED DISTRIBUTION SWITCHBOARDS DUVAR T P TES SAT KAB NLER www.eae-et.com.tr EAE Elektroteknik A.S. reserves rights to make changes within this document without prior notice. CONTENTS
More information63 to 125 A. Functions. Conformity standards. General characteristics. Changeover switches SIRCO VM1 changeover switches.
comut_004_a_1_cat Changeover switches switches 63 to 125 A switches are manually operated three or four pole switches. They provide, source inversion or switching under load between two low voltage power
More informationFlatwall. Aesthetic value and functional integration for home automation
Flatwall Aesthetic value and functional integration for home automation 2 MyHOME FLATWALL Index 2-13 General features 14-33 General rules for installation 34-39 Catalogue MyHOME FLATWALL 240-270 2 MyHOME
More informationArgenta W A L L M O U N T I N G M E T A L C A B I N E T S
Argenta W A L L M O U N T I N G M E T A L C A B I N E T S The ARGENTA Series is a group of metal enclosures used to house on the inside electrical or electronic switchgear, controlgear and equipment necessary
More informationHigh Safety low voltage switchgears For maximum requirements far beyond all standards.
High Safety low voltage switchgears For maximum requirements far beyond all standards. High Safety solutions From the specialist for arc fault protection For years, the names ModuPro and ModuCon have stood
More informationLSFC Power Factor Correction Systems
LSFC Ready to connect, automatic in sheet steel cabinets for floor installation. Suitable for networks without harmonic distortion. Power Range: 100 to 00 kvar Modular construction in freestanding sheet
More informationMNS ACS880 Switchgear mounted industrial drives
MNS ACS880 Switchgear mounted industrial drives Switchgear mounted industrial drives AC Drives are designed for installation in a normal industrial environment. However, various auxiliary equipment for
More informationAThink future. Switch to green. Mini Panel Board. Cost-effective, space-saving board up to 400A.
www.moeller.co.uk Mini Panel Board Cost-effective, space-saving board up to 400A Product Catalogue and Selection Guide Mini Panel Board Miniature Circuit Breakers Moulded Case Circuit Breakers XBoard Consumer
More informationKaedra system PB102271
PB102271 Index General presentation 72 Selection guide 75 Enclosures for sockets 76 Enclosures with interface 77 Enclosures for modular devices 78 Universal enclosures 79 The functional plates 80 Accessories
More informationPackage Substation. The efficient solution for your electrical distribution network
Package Substation The efficient solution for your electrical distribution network Why Prefabricated Substations? Biosco, safe and effective substations Safety: A fully tested electrical equipment > Much
More informationReferences. References. Rating (A) Référence
DIRECT OPERATION T O O R D E R EXTERNAL OPERATION picto_080_c_1_gb Switch body Direct Switch body + handle + Shaft + + OTHER ACCESSORIES External handle acces_128_a_1_cat acces_129_a_1_cat Direct handle
More informationThe right solution for every home
Domae Household switchboards The right solution for every home Household guide 2002 Building a New Electric World. Household switchboards Domae The right solution for every home Household guide 2002 Building
More informationLow voltage. Acti 9. the efficiency you deserve. Catalogue 03/2016
Low voltage Acti 9 the efficiency you deserve Catalogue 03/2016 schneider-electric.com 1 and 2 LV surge s 1 and 2 LV surge s (cont.) The 1 range of surge s meets the normative withstand capability of wave
More informationDoepke MAIN SWITCH OPTIONS. The insulated consumer unit range consists of four enclosure sizes to enable any combination from 1 to 16 usable ways.
Doepke The insulated consumer unit range consists of four enclosure sizes to enable any combination from 1 to 16 usable ways. Designed to meet BSEN60439-3 these easy to install consumer units accept the
More informationSentry. The Sentry range of Consumer Units from MK Electric has been stylishly designed to blend in with its
Sentry 2 TECHNICAL HOTLINE +44 (0)268 563720 The Sentry range of Consumer Units from MK Electric has been stylishly designed to blend in with its environment. The curved lines and slim-line appearance
More information1/2 Introduction. SIMBOX LC 1/7 Introduction 1/8 Flush-mounting and surfacemounting. 1/9 Dimensional drawings
Siemens AG 200 ALPHA SIMBOX Small Distribution Boards /2 Introduction /2 Introduction /3 Flush-mounting and hollow-wall distribution boards /4 Hood-type distribution boards /5 Accessories /6 Dimensional
More informationSIRCO Load break switches for power distribution from 125 to 5000 A
The solution for Load break switches sirco_456_a_1_cat > Main switchboard > Distribution panel > Emergency breaking > Network coupling > Local safety breaking sirco-ac_001_a_1_cat SIRCO 3 x 250 A direct
More informationPragma. Doors reference if necessary. references. In perfect harmony. + customiser
modular surface mounted enclosure Robustness, aesthetic, ergonomics a range of enclosures designed to appeal a harmonious solution. Which enclosure fits you best? Type Rows Modules capacity I(n) number
More informationDistribution Systems ALPHA. Answers for infrastructure and cities. Edition Catalog LV 51
Distribution Systems ALPHA Catalog LV 51 Edition 2013 Answers for infrastructure and cities. Related catalogs Low-Voltage Power Distribution and LV 10.1 Electrical Installation Technology SENTRON Protection,
More informationSwitch Disconnectors, Main and EMERGENCY-STOP Switches
General data Overview Siemens G 2010 1 2 3 NSE0_01931b 4 5 6 7 1 uxiliary switch (3SB for 3K; 3KX for 3KE) 2 IP20 terminal cover (Operator side) 3 3K switch disconnector 4 rcing contacts (only for 3KE)
More informationElectrical cabinets for server and LAN. 42 Lafer
Lafer@ck Electrical cabinets for server and LAN 42 Lafer Lafer@ck Lafer. Around you Lafer@ck Lafer 43 Lafer@ck Electrical cabinets for server and LAN They are designed for all information systems and data
More information89SV80/R1200. Mechanical Components. Marshalling rack cubicle with double-sided MTP-Elements. Application. Description. Cubicle
Module Description Procontrol P Mechanical Components Marshalling rack cubicle with double-sided MTP-Elements 1KGD 400 012 E, Edition 01/2010 89SV80/R1200 Application The marshalling rack cubicle has the
More informationSymmetra PX 160. Maintenance Bypass Enclosure. Installation 05/
Symmetra PX 160 Maintenance Bypass Enclosure Installation 05/2014 www.schneider-electric.com Legal Information The Schneider Electric brand and any registered trademarks of Schneider Electric Industries
More informationpro du c t n ote System pro E control IS2 New Range Extension H1400 and H1600
pro du c t n ote System pro E control IS2 New Range Extension H1400 and H1600 2 System pro E control IS2 New Range extension H1400 and H1600 System pro E control IS2 New Range Extension H1400 and H1600
More informationModular switch disconnectors and modular change-over switches
Modular switch disconnectors and modular change-over switches Modular switch disconnectors and modular change-over switches The new generation of modular switch disconnectors is guarantee of reliability
More informationMEDIUM VOLTAGE PRODUCTS. UniSec Air-insulated medium voltage secondary distribution switchgear Informed choice for safety
MEDIUM VOLTAGE PRODUCTS UniSec Air-insulated medium voltage secondary distribution switchgear Informed choice for safety 2 UNISEC AIR-INSULATED MEDIUM VOLTAGE SECONDARY DISTRIBUTION SWITCHGEAR Operator
More informationNEW Titan II A & B Distribution Boards
A Type Board Specification: Powder Coated Epoxy Resin Finish RAL 7035 Designed and built in the UK to BS EN 60439 Maximum busbar rating 125A Degree of protection IP3X to BS EN 60529 Blank gland plates
More informationIntegration Fully integrated Controls, Power Monitoring, Generator Paralleling, and Switching Schemes as a complete turnkey solution.
Technical Datasheet Tier Power Systems, Inc. iq Series UL 1558 Switchgear Tier Power Systems iq Series is a leader in switchgear technology. iq Series provides advanced power distribution technology and
More informationIT infrastructure Efficiency-boosting solutions. nextlevel. for data centre
IT infrastructure Efficiency-boosting solutions nextlevel for data centre 2 Rittal IT infrastructure The whole is more than the sum of its parts. The same is true of Rittal The System. With this in mind,
More informationDefender B Board. Make The Switch
Defender B Board Make The Switch Defender B Board 1.2mm Electro Galvanised Sheet Steel Tested to BS EN61439-3 Busbar Short Time Withstand Rating Icw 20kA 0.25s Tested at 35 C Ambient Tin Plated Busbar,
More informationService poles for industrial applications
Service poles for industrial applications Ready to go. The ISS basic profile Our industry service poles bundle power, data and compressed air in a compact and robust manner. This means relocations, for
More informationSPM Series Plug-in Surge Protection
SPM Series Plug-in Surge Protection The SPM series of modular surge protection devices provides protection of equipment connected to incoming low voltage AC power supplies against the damaging effects
More informationProtect Circuit Protection
Circuit Protection Product Catalogue 2018 Protect Circuit Protection Deta s new range of domestic Circuit Protection provides a high quality and cost effective solution, perfect for both new build and
More informationStandard Product Left-Hinged
Spec-01118 PROLINE G2 Modular Enclosure Solutions Enclosure Packages Industrial Packages, Type 12 INUSTRY STANARS UL 508A Listed; Type 12; File Number E61997 NEMA/EEMAC Type 12 CSA File Number 42186; Type
More information3a. IEM Indoor Metal Clad Medium Voltage Switchgear 25KV a. Section INDOOR METAL CLAD MEDIUM VOLTAGE SWTICHGEAR (Std.
3a. IEM Indoor Metal Clad Medium Voltage Switchgear 25KV 16346-1 3a. Section 16346 INDOOR METAL CLAD MEDIUM VOLTAGE SWTICHGEAR (Std. Relays) Part 1 General 1.1 CONDITIONS AND REQUIREMENTS: A. Refer to
More informationGHA. Gas-Insulated Circuit-Breaker Switchgear Unit up to 40.5 kv. Gas-Insulated Switchgear. Customer Benefits
01 Gas-Insulated Circuit-Breaker Switchgear Unit up to 40.5 kv PM103255 Energy supply security is our permanent challenge. At Schneider Electric, we are constantly developing and improving our products
More informationALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP
ALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP SIMBOX 63 /4 Introduction /5 Flush mounting distribution boards /6 Hollow-wall distribution boards /7 Surface mounting distribution boards /7 Hood-type
More informationMasterpact NT and NW. 10 years already. Setting the standard, once again
NT and NW 10 years already The original has set a new standard for power circuit breakers around the world. Over the years, other major manufacturers have tried to keep up by developing products incorporating
More informationCENTERLINE 2500 Motor Control Centers
CENTERLINE 2500 Motor Control Centers High Performance Motor Control Centers and Switch Gear Meeting IEC 61439-2 Product Description Allen-Bradley CENTERLINE 2500 motor control centers (MCCs) are designed
More informationBOXES SOLUTIONS BOXES
BOXS BOXS SOLUTIONS - wide range of dimensions: over 40 enclosures with blank door, 9 models with glazed door, enclosures with single blank door, double door with rod system and enclosure with single glazed
More informationAccessories for control enclosures. BERNSTEIN attachment solutions. Double coupling head (console version with suspension system attachment)
25 Accessories for control enclosures BERNSTEIN attachment Single coupling head (suspended console version) Double coupling head (console version with suspension system attachment) 322.5 231 232 140 The
More informationMedium voltage switchgear With fixed pattern circuit breaker GenieEvo
Medium voltage switchgear With fixed pattern circuit breaker GenieEvo Simple and highly reliable switchgear for primary and secondary distribution GenieEvo is an indoor switchgear assembly circuit breaker
More informationKMP A3. Air Insulated Medium Voltage Switchgear Powerful. Safe. Highly Available
KMP A3 Air Insulated Medium Voltage Switchgear Powerful. Safe. Highly Available High power switchgear systems For primary applications The name MediPower represents powerful medium voltage energy distribution
More informationDOCA0093EN-00 10/2015. ULP System. ULP (Universal Logic Plug) System User Guide 10/2015 DOCA0093EN-00.
ULP System DOCA0093EN-00 10/2015 ULP System ULP (Universal Logic Plug) System User Guide DOCA0093EN-00 10/2015 www.schneider-electric.com The information provided in this documentation contains general
More informationSYSTEM WORLD PRODUCT INFO
SYSTEM WORLD PRODUCT INFO August 208 System case.. System Case Configuration.. Width x depth x height (inches).56 x 0.62 x 3.3 inches Number of System Boxes Material Lid Type Art. No. Empty* ABS Black
More informationSwitches 6/1. 6/4 Introduction. 6/5 5TE8 control switches. 6/7 5TE4 8 pushbuttons. 6/9 5TE8 On/Off switches. 6/11 5TE1 switch disconnectors
6/4 Introduction 6/5 5TE8 control switches 6/7 5TE4 8 pushbuttons 6/9 5TE8 On/Off switches 4 6/11 5TE1 switch disconnectors 6 6/1 Switch to manual? Wherever electrical systems need to be switched on or
More informationTopConsole system TP. Combination options 1-part 2-part 3-part. System accessories Page 537 Monitors, keyboards From page 796 Climate control Page 389
opconsole system P System accessories Page 537 Monitors, keyboards From page 796 Climate control Page 389 Enclosure: Sheet steel 1.5 mm Door and console cover: Sheet steel, 2.0 mm, all-round foamed-in
More information3RV1 Circuit-Breakers
SIRIUS 3R Description Mountable accessories 3RV1 Circuit- Breakers Circuit-breaker S00 with mountable accessories 3 2 1 5.1 NSK-7715a 4 Circuit-breaker S0 with mountable accessories 1 7 3 5.2 2 6 NSK-7716a
More informationIDE Load break switches for machine control Remotely trippable switch from 32 to 160 A
The solution for Load break switches > Industry. > Non critical buildings. > Public Access Sites. > High Rise Buildings. ide_021_a_1_cat ide_022_a_1_cat IDE 4x40 A External operation IDE 4x40 A Direct
More informationMemguard Advantage DISTRIBUTION SYSTEM Product Guide. MCB Single Phase Distribution Boards MCB Three Phase Distribution Boards
Memguard Advantage DISTRIBUTION SYSTEM Product Guide MCB Single Phase Distribution Boards MCB Three Phase Distribution Boards 1 Contents and Introduction Contents Page Introduction Contents and Introduction
More informationManual source-changeover systems Possible combinations
Manual source-changeoer systems Possile cominations A manual source-changeoer system can e installed on two or three manually-operated and mechanically interlocked circuit reakers or switch-disconnectors.
More informationQuasar Series Technical Features
Product Description The Quasar Series is a modern imcc (Intelligent Motor Control Center) switchboard line for low voltage and currents up to 3150 A, and in compliance with IEC 60439-1 - TTA compliant
More informationCABINETS & ENCLOSURES FOR PREPAYMENT METERS
CABINETS & ENCLOSURES FOR PREPAYMENT METERS Solutions designed according to customer need, conceived for every type of prepayment meter: > Meters with keypad data entry terminal > Split meters with remote
More informationPanelView Plus/VersaView CE Terminals and Display Modules
Installation Instructions PanelView Plus/VersaView CE Terminals and Display Modules (Catalog Numbers 2711P-xxxxxx, 6182H-xxxxxx) English Inside: Overview...2 For More Information...2 Modular Components...3
More informationElectrical Demand Specification (Reference SOP: )
Project: Equipment Description: Location: Equipment No.: Project No: Protocol No.: Content Index 1. GENERAL...3 Design Standards...3 1.1. Standards...3 2. DESIGN...3 2.1. Safety...3 2.2. Circuit protection...3
More informationNW08 to NW63 fixed circuit breakers Circuit breakers
fixed circuit breakers Circuit breakers DB404362.eps DB404363.eps A Masterpact fixed circuit breaker is described by 4 catalogue numbers corresponding to: b the basic circuit breaker b a control unit b
More information02 / The new N/PE Quick-terminals For any type of distribution systems
02 / 2013 The new N/PE Quick-terminals For any type of distribution systems 04 2012 Standardised, future-oriented and flexible The new N/PE Quick-terminals from STRIEBEL & JOHN are designed for the things
More information1S20. Arc Fault Monitor Relay. Features. Introduction. ARC Fault Protection
Technical Bulletin Arc Fault Monitor Relay Features Compact, economic design Simple panel mounting for retrofit applications Two or three arc sensor inputs Two high speed tripping duty arc sense output
More informationSEQUESTR PREfERREd-CUToUT disconnects Mild STEEl SEQUESTR ExTERnal disconnect PaCkagE, TyPE 12 industry STandaRdS application finish SPECifiCaTionS
Spec-224 Mild Steel SEQUESTR External isconnect Package, Type 12 INUSTRY STANARS UL 58A Listed; Type 12; File No. E61997 cul Listed per CSA C22.2 No. 94; Type 12; File No. E61997 NEMA/EEMAC Type 12 CSA
More informationCC COMPACT DIP SWITCH
CC COMPACT DIP SWITCH COMFORTLINE DIP SWITCH C-R5 186841, 186842, 186843 Typical Applications Built-in in compact luminaires for Shop lighting Downlights Panels ComfortLine DIP switch C-R5 SELECTABLE OUTPUT
More information19" TiRAX cabinet system. from page 3. 19" NETcell cabinet system from page 31. Open 19" racks from page 43
9" TiRAX cabinet system from page 9" NETcell cabinet system from page Open 9" racks from page Wall-mounting/stand-alone distribution systems from page 5 Wall-mounting enclosure systems from page 6 Air
More informationJunction Boxes & Enclosures JBEP and ECEP Series: Undrilled Fiberglass Reinforced Polyester Enclosures Increased Safety
CSPe Type Small Version CAe Type Non-Hinged Version CAe Type Hinged Versions Compliance Data: ATEX - IECEx: Zone 1 & 1 & ATEX II GD IECEx CE Ex e II T6 to T Ex td A1 T75 C to T95 C Ex ia IIC; Ex ib IIC
More informationStandard Product Left-Hinged
Spec-01118 PROLINE G2 Modular Enclosure Solutions Enclosure Packages, Type 12 Industrial Packages, Type 12 INUSTRY STANARS UL 508A Listed; Type 12; File Number E61997 NEMA/EEMAC Type 12 CSA File Number
More informationMOTOR CONTROL CENTER INFINITY SERIES
MOTOR CONTROL CENTER INFINITY SERIES Infinity in brief Panel & Building Solutions Meets latest UL, CSA and IEC standards, as well as ABS & DNV-GL international approvals Fully withdrawable Drawer Units
More informationCOMPACT LED DRIVERS. ComfortLine Residential. ComfortLine RESIDENTIAL , , ,
COMPACT LED DRIVERS ComfortLine RESIDENTIAL 186679, 186680, 186681, 186682 Typical Applications Built-in in compact luminaires for Residential lighting Downlights ComfortLine Residential VERY COMPACT SHAPE
More informationInterpact Switch-disconnectors INS/INV40 to 2500 A. INS/INV Standard version with black handle - Fixed /FC
28901 2890 28905 28909 28911 2891 116 1167 1169 1171 117 1175 171 159 161 16 165 167 169 111 115 11 117 119 1151 115 1155 Load s Interpact Switch-disconnectors INS/INV0 to 2500 A The Interpact INS/INV
More informationCapitole 40 Low Voltage distribution and control systems
Capitole 40 Low Voltage distribution and control systems Product Focus Full personal safety, optimum operational reliability and application flexibility, uniquely combined in standard design Eaton's European
More informationMESP TECHNICAL SPECIFICATION FOR 22 kv METAL ENCLOSED SWITCHGEAR
Engineering Specification Electrical Networks TECHNICAL SPECIFICATION FOR 22 kv Version: 2 Issued: 19 th December 2016 Owner: Chief Engineer Approved By: Andrew Russack Head of Engineering - Electrical
More informationPRF1 12.5r/PRF1 Master/ PRD1 25r/PRD1 Master Type 1 and 2 LV surge arresters
Type 1 and 2 LV surge s The Type 1 range of surge s meets the normative withstand capability of wave type 10/350 μs (8/20 μs for Type 2 surge s). It is suitable for use with, TN-C and 230 V IT earthing
More informationDIGITUS Server Cabinet Unique Series
15 Years Product Warranty kg loading capacity Modular aluminum frame construction large range of equipment available Overview DIGITUS Server Cabinet Unique Series 600, 800 mm width mm depth Features Safety
More information////// SUBSTATIONS. DC Switchgear Range. Type MBS (IEEE/ANSI standards)
////// SUBSTATIONS DC Switchgear Range Type MBS (IEEE/ANSI standards) GENERAL INFORMATION With a complete range of equipment and a leading expertise in DC traction power substations, Sécheron SA is a world
More informationOkken 100% The safest and most reliable low voltage switchboard IEC IEC &2
Okken The safest and most reliable low voltage switchboard 100% IEC 604391 IEC 614391&2 Okken: switchboard safety everyday Safety is a major issue, not only to guarantee installation durability, but also
More informationSiemens AG KD Switch Disconnectors SENTRON. Edition December Answers for infrastructure and cities.
KD Switch Disconnectors SENTRON Edition December 01 Answers for infrastructure and cities. Related catalogs Low-Voltage Power Distribution and LV 10 Electrical Installation Technology SENTRON SIVACON ALPHA
More informationSmall enclosure golf VF & VS
Small enclosure golf VF & VS The enclosure for flush or surface mounting installation When building or renovating residential buildings, compact solutions are often required for electrical installations.
More informationADJUSTABLE FLOOR BOXES
ADJUSTABLE FLOOR BOXES TABLE OF CONTENTS Description Applications References Configuration type Installation Technical Data Mechanism compatibility Dimensions Description Floor housings for electrical
More informationSPM Series Plug-in Surge Protector Type 2/3 (Test Class II/III) Single & Three Phase Surge Arresters
The SPM series of modular surge protection devices provides protection of equipment connected to incoming low voltage AC power supplies against the damaging effects of transient over voltages caused by
More informationEaton convincing in terms of safety, performance and operational availability. xenergy Switchboard. Switching to perfect
Eaton convincing in terms of safety, performance and operational availability. xenergy Switchboard Switching to perfect xenergy: Controls systematically. Saves in three ways. Thinks ahead. With Eaton,
More informationALPHA SIMBOX Small Distribution Boards
ALPHA SIMBOX Small Distribution Boards /2 Introduction /3 Introduction /4 Flush-mounting and hollow-wall distribution boards /5 Surface-mounting and hood-type distribution boards /6 Accessories /7 Dimensional
More informationMMLB 01/MMLB 02 Multi-finger Test Plug/ Single-finger Test Plug Technical Data MMLB_EN_TD_A
AUTOMATION MMLB 01/MMLB 02 Multi-finger Test Plug/ Single-finger Test Plug Technical Data MMLB_EN_TD_A GRID Note: The technical manual for this device gives instructions for its installation, commissioning,
More informationCONTROL PANEL WIRING SPECIFICATIONS
CONTROL PANEL WIRING ISSUE STATUS FIRST REV DESCRIPTION DATE 001 1 ST ISSUE 22/04/2014 002 1 ST AMMENDMENT 10/03/2017 003 2 ND AMMENDMENT 08/09/2017 THIS DOCUMENT IS DESIGNED TO COVER ALL APPLICATIONS,
More informationSINAMICS. SINAMICS G120P dv/dt filter plus Voltage Peak Limiter. Safety information 1. General. Mechanical installation. Electrical installation 4
Safety information 1 General 2 SINAMICS SINAMICS G120P dv/dt filter plus Voltage Peak Limiter Operating Instructions Mechanical installation 3 Electrical installation 4 Maintenance and servicing 5 Technical
More informationSTR-3 STANDARD 3-PHASE 230 VAC TRANSFORMER CONTROLLER. Mounting and operating instructions
STANDARD 3-PHASE 230 VAC TRANSFORMER CONTROLLER Mounting and operating instructions Table of contents SAFETY AND PRECAUTIONS 3 PRODUCT DESCRIPTION 4 ARTICLE CODES 4 INTENDED AREA OF USE 4 TECHNICAL DATA
More informationUL 508A Listed; Type 12; File No. E61997 cul Listed per CSA C22.2 No. 94; Type 12; File No. E CSA File No : Type 12
Spec-224 SEQUESTR Preferred-Cutout isconnects SEQUESTR External isconnects Mild Steel SEQUESTR External isconnect Package, Type 12 INUSTRY STANARS UL 58A Listed; Type 12; File No. E61997 cul Listed per
More informationRiLine Compact The smart power distribution system
RiLine Compact The smart power distribution system 2 Power distribution in a confined space Rittal are the leading suppliers of reliable power distribution and backup systems for controlgear. The new RiLine
More information