4K HDBase-T Matrix Kit

Transcription

1 4K HDBase-T Matrix Kit Simple set up guide HDMI8X8MC

2 Important Safety Notice Thank you for purchasing this Antiference HDMI distribution product. Please read the following instructions carefully and retain for future reference. Please pay careful attention to the following safety considerations: 1. Do not place any items on the device 2. Ensure no liquids are on or near the device as splashes may damage the unit 3. For cleaning, use a damp cloth only without solvents 4. Do not attempt to open the case as there is a danger of electric shock 5. Repairs should be carried out by a qualified technician 6. Place the unit in a well ventilated area to prevent overheating 7. Carry out the installation before connecting the device to a source of power 8. Use only the supplied power supply as 3rd party products may damage the product 9. Please dispose of responsibly and in accordance with Weee directive.

3 Content 1. Introduction Features Package Contents 2 2. Product Appearance K HDBaseT Maxtrix Switcher HDBase-T Receiver 5 3. System Connection System Applications Connection Diagram Installation Procedure 8 4. System Operations IR Control IR Remote Control TV set at matrix location Control Local Device Remotely Specification K HDBaseT Matrix Switcher HDBaseT Receiver Panel Drawing K HDBaseT Matrix Switcher HDBaseT Receiver Troubleshooting & Maintenance 16

4 1.Introduction This Antiference HDMI product is a professional 4K HDBase-T matrix kit with HDCP2.2 support. The kit consists of the 4K Matrix Switcher, 7 HDBase-T PoC receivers, PSU & IR accessories. The product features 8 HDMI inputs & 7 HDBase-T outputs + 1 HDMI output. Other connections include IR in & out ports, optical audio L&R RCA & TCP/IP & RS232. The 7 receivers included are PoC and feature Bi-directional IR control. All HDMI inputs can be selected by either the front panel buttons, IR, RS232 or GUI. The selected source is delivered to HDBaseT zoned outputs 1~7 & HDMI Output. The Matrix can deliver 4K/UHD signals up to 40m, 1080p up to 70m and powering the receivers via a single CAT6 cable. Please ensure good quality CAT6 cable is used. There is an EDID management system for complete flexibilty. Audio sources can be selected via RS232 commands and TCP/IP at the Matrix Switcher or by 3rd Party control such as Control 4. Drivers are available at Features HDBaseT Matrix Switcher that features 7 HDBaseT outputs and 1 HDMI output Supports HDCP 2.2, and is backwards compatible with previous versions of HDCP and HDMI Transmits 60Hz 4:2:0 up to 26 ft. (8m) via HDMI port and 131 ft. (40m) via HDBaseT port 7 HDBaseT outputs with distances up to 230 ft. (70m) at 1080p and 131 ft. (40m) at 4Kx2K on a single Cat6 cable HDBaseT Receivers are powered by the matrix using PoC technology LED indicators show real-time switching status Controllable via front panel, RS232, IR and TCP/IP Built-in GUI for TCP/IP control and setup Powerful EDID management Support CEC to control far-end display devices via RS232 commands Features Micro USB port for firmware upgrades Easy installation with rack-mounting design, mounting hardware included 1

5 1.2 Package Contents 1 x 4K HDBaseT Matrix Switcher 2 x Mounting ears & 6 x Screws 4 x Trapezoidal Plastic pads 1 x Power Cord 8 x IR Receivers 9 x IR Emitters 1 x IR Remote 1 x RS232 cable(phoenix to DB9) 7 x HDBaseT Receivers 14 x Mounting ears & 28 x Screws 28 x Round Plastic pads 1 x User manual 2. Product Appearance K HDBaseT Matrix Switcher 1) Front Panel No. Name Description 1 FW Micro USB port for updating firmware 2 Power Indicator Red LED indicates if power is present 3 Input Selector Indicators 8 input selector buttons & 8 green indicators. Numbered from 1 to 8 4 Output Selector Indicators 8 output selector buttons numbered from "1" to "8" 2

6 2) Rear Panel No. Name Description 1 HDMI INPUTS 8 x HDMI inputs: Type A female HDMI connector, connect the source device with an HDMI cable to any of the HDMI inputs. 2 OUTPUTS 7 x HDBaseT outputs: The HDBT RJ45 outputs deliver HD video, Audio and PoC to the HDBaseT Receiver up to 70m. 1 x HDMI output: Connect an HDMI cable from the Matrix Switcher to the displayer. 3 IR IN 7 x IR IN: Connect with IR receiver, fixed IR input for the output, cannot be switched separately. It makes up an IR bi-directional transmission with the IR OUT on the corresponding HDBaseT receiver. 1 x IR EYE: Connect with extended IR receiver, use the IR remote to control the Matrix Switcher. 3

7 No. Name Description 4 IR OUT 8 x IR OUT: Plug in IR emitters to deliver the IR signal sent from the farend receivers connected to the HD- BaseT ports. These IR OUT sockets make up an IR matrix with the IR IN sockets on the far-end receivers, and all can be switched simultaneously with the AV signal, or separately from switching. In default setting, the 1~7 IR OUT corresponds with the 1~7 IR IN, i.e. IR OUT1 - IR IN1, IR OUT2 - IR IN2, IR OUT7 - IR IN7. 1 x IR ALL OUT: Plug in IR emitter to deliver the IR signal to control input source device form any of far-end receivers. 5 CONTROL RS232: Serial port for unit control, 3-pin pluggable terminal block, connects with control device (e.g. PC). TCP/IP: RJ45 port. Connect with PC for Web-based GUI control. 6 AUDIO OUTPUTS SPDIF: Digital audio output connects directly via an optic fibre cable to the Toslink input on a sound bar. RCA (L&R): PCM Analogue audio output sockets connect the de-embedded audio additional speakers. 7 AC100V~240V Power port, connect with power cord Note: Pictures shown in this manual are for reference only, different model and specifications are subject to real product. 4

8 2.2 HDBase-T Receiver 1) Front Panel HDMI OUT IR IN IR OUT No. Name Description 1 HDMI OUT Connect to the HDMI display. 2 IR IN Connect the IR receiver and position in a suitable location where the RCU can be pointed at it. Commands from the matrix remote and source remote are received with this port. 3 IR OUT This feature is used if control of the TV connected is required at the matrix location. Connect an IR transmitter to this port and position in the correct location on the TV. 5

9 2) Rear Panel 1 2 LINK TP IN HDCP No. Name Description 1 Power Indicator OFF: No power; RED: DC power present (PoC). 2 TP IN The RJ45 socket has two LED status indicators. HDCP: OFF: No HDMI traffic (no picture) GREEN: Signals with HDCP. Blinking GREEN: Signal without HDCP LINK: HDBT Link status indicator. OFF: No Link YELLOW: Link Successful Blinking YELLOW: Link Error 6

10 3. System Connection 3.1 System Applications This Antiference Compact 4K matrix kit is designed for residential and commercial applications delivering 4K & HD video & audio to up to 8 locations/tv sets with IR control. Compatible source devices include SKY HD/Q, Blue Ray Player, Apple TV or CCTV systems Connection Diagram HDMI: Audio: Control: Internet: HDBaseT: IR Receiver IR Receiver TV Remote Remote Central Control System Router ipad Amplifier Speaker IR IN IR OUT CONTROL AUDIO OUTPUT Tx Rx IR EYE ALL RS232 TCP/IP 8-SPDIF L 8 R HDBT 2-HDBT 3-HDBT 4-HDBT 5-HDBT 6-HDBT 7-HDBT 8-HDMI INPUTS OUTPUTS Receiver Laptop PS4 Apple TV Blu-Ray IR Emitter HDTV IR Receiver Apple Remote IR Emitter HDTV 7

11 3.3 Installation Procedure 1. Connect HDMI sources (e.g. SKY Q) to HDMI input ports of the Matrix Switcher using good quality HDMI cables. 2. Connect the Pre-Installed CAT6 cable infrastructure to Matrix Switcher and HDBase-T receivers. 3. A local TV set may be connected to the matrix via the HDMI output port. 4. Plug in an HDMI cable in to each of HDBaseT Receiver and connect to the local TV set. 5. Connect AVR amplifier (if used) to SPDIF output port or via the Toslink optic fibre cable. 6. Audio out on RCAs can be used if required. 7. The IR TX sensors should be connected to the IR OUT ports on the matrix and positioned in the correct location on the source devices. 8. The IR RX sensors are connected to the IR IN ports on the HDBase-T receivers to enable control of the matrix and sources in the remote location(s). 9. Plug the phoenix connector in to the RS232 socket on the matrix, this enables the matrix to be controlled via a PC or 3rd party control system. 10. Connect an Ethernet patch lead from the router in to the Ethernet port on the matrix to enable control via TCP/IP protocol. 11. Finally connect the mains cable. Once you have ensured all components have been connected and the installation is completed, switch on the mains supply at the socket. Note: We recommend a straight-through cable run from the matrix to the HDBase-T receiver. Avoid using patch panels or wall plates. 8

12 4.System Operations 4.1.IR Control IR Remote Connect the supplied IR receiver to the IR EYE port of the matrix. This allows the user to control the matrix locally with the remote control supplied. This feature can be useful if the matrix is to be located in a cupboard. Additional remote controls are available please check with your supplier. 1 Standby button 2 INPUTS: Input source selection buttons, range from 1~8. 3 OUTPUTS: Output selection buttons, range from 1~8. 4 Menu buttons: ALL, EDID, CLEAR and ENTER. ALL: Select all outputs. EDID management button: Enable input port to manually capture and learn the EDID data of the HDTV output. CLEAR: Withdraw an operation like switching output channel, learning EDID data before it comes into effect. This returns the matrix to the previous state. ENTER: Confirm operation. INPUTS OUTPUTS MENU ALL EDID CLEAR ENTER

13 1) To switch an input to an output: Example: input 1 to output 3 Press INPUTS 1 + OUTPUTS 3 The above procedure is can be carried out on the matrix front panel or via the remote control unit. Default status, on initial boot up the matrix assigns the IR outputs to the corresponding HDMI input, meaning, IR out 1 is directly associated to HDMI input 1 and so on. When you switch an HDMI input to a different output, the corresponding IR OUT will be switched synchronously to allow the IR commands to be sent from the selected output zone back through the matrix to the source. 2) To switch an input to several outputs: Example: switch input 2 to output 3 and 4 Press INPUTS 2 + OUTPUTS 3 + OUTPUTS 4 3) To switch an input to all outputs: Example: Input 1 to all Outputs Press INPUTS 1 + ALL + ENTER Control TV set at matrix location Connecting an IR receiver sensor to the IR IN port on the matrix enables users to control TV sets (or other devices) from the matrix location. The IR TX with then be connected to the IR OUT port on the HDBase-T receiver and located in the correct position on the device. See the figure below: Control TV set or other device from matrix location. 10

14 4.1.3 Control Local Device Remotely Connect IR receiver(s) to IR IN on far-end HDase-T receiver(s), and IR Emitter(s) to IR OUT port of the switcher, and use the IR Remote of local source to control the device remotely. 1 to 1: Connect an IR receiver to IR IN on far-end HDBT receiver, and an IR Emitter to IR OUT port of the switcher. Use the IR Remote of local source to control the device remotely. See below: Control source device from remote location This process can be repeated for each of the HDBase-T outputs to enable control of each source from each remote location. The matrix supports a routed IR function and allows the IR to switch to the source being watched and only enables control of the source being watched. This allows the use of multiple like source devices. 11

15 5.Specification 5.1 4K HDBaseT Matrix Switcher Video Input Input Input Connector Input Level Input Impedance HDMI Standard Video Output Output Output Connector Output Level Output Impedance HDMI Standard Video general Video Signal Transmission Distance Resolution Range EDID Management Gain Bandwidth Switching Speed 8 HDMI Female HDMI T.M.D.S. 2.9V~3.3V 100Ω (Differential) Support 4K@60 4:2:0 & HDCP2.2 and is backward compatible with all previous standards. 1 HDMI 7 HDBaseT Female HDMI Female RJ45(with LED indicators) T.M.D.S. 2.9V~3.3V 100Ω (Differential) Support 4K@60 4:2:0 & HDCP1.4 and is backward compatible with all previous standards. HDMI (or DVI-D) 1080P@60Hz 70m 4Kx2K@60Hz 40m Up to 4Kx2K@60Hz In-built EDID data and manual EDID management 0 db 10.2Gbit/s 200ns (Max.) 12

16 Audio general Output Signal Analog Audio Output Digital Audio Output Frequency Response Output Connector Control Parts Control Ports Panel Control RS232 Control IR TCP/IP Control General Power Supply Power Consumption Stereo audio Digital audio Support PCM Supports PCM, Dolby, DTS, DTS-HD 20Hz~20KHz 1 L&R(RCA) 1 SPDIF 8 IR OUT 1 IR ALL OUT 7 IR IN 1 IR EYE 1 TCP/IP (female RJ45) 1 RS232 (3-pin pluggable terminal block) Front panel buttons 3-pin pluggable terminal block Extended IR receiver Web-based GUI V~, 50/60Hz 93W (Max) Temperature 0~ +50C Reference Humidity 10% ~ 90% Dimension (W*H*D) Net weight 436.4mm x 44.0mm x mm 2.9Kg 13

17 5.2 HDBaseT Receiver Input & Output Input Input Connector Output Output Connector Control Control Connector General Resolution Range Transmission Mode Transmission Distance Bandwidth HDMI Standard 1 HDBaseT Female RJ45(with LED indicators); 1 HDMI Female HDMI 1 IR IN 1 IR OUT 3.5mm mini jacks Up to 4K 2K@60Hz HDBaseT 1080P@60Hz 70m 4Kx2K@60Hz 40m 10.2Gbps Temperature 0~ +50C Humidity 10% ~ 90% Power Supply Dimension (W*H*D) Net Weight Support HDMI1.4 and HDCP1.4 Powered by 4K HDBaseT Matrix Switcher. 61mm x 24mm x 120mm 280g 14

18 6. Panel Drawing K HDBaseT Matrix Switcher 6.2 HDBaseT Receiver LINK TP IN HDCP mm mm Receiver HDMI OUT IR IN IR OUT mm 15

19 7. Troubleshooting & Maintenance Problems Potential Causes Solutions Loss of colour or no video signal output No output image when switching Cannot control the device via front panel buttons Cannot control the device via IR remote The connecting cables may not be connected correctly or it may be broken Make sure the connection is good No signal at the input / output end Fail or loose connection Input source is with HDCP while the HDCP compliance is switched off. The display doesn t support the input resolution. Front panel buttons are locked. The battery has run out. The IR remote is broken. Beyond the effective range of the IR signal or not pointing at the IR receiver Check whether the cables are connected correctly and in working condition. Make sure the connection is good Check with oscilloscope or multimeter if there is any signal at the input/ output end. Make sure the connection is good Send command /%[Y]/ [X]:1. or change HDCP compliance status in GUI. Switch for another input source or enable the display to learn the EDID data of the input. Send command /%Unlock; or select unlock in GUI interface to unlock Change for new battery. Replace the remote Adjust the distance and angle and point right at the IR receiver. 16

20 Power Indicator remains off when powered on EDID management does not work normally There is a blank screen on the display when switching Cannot control the device by control device (e.g. a PC) through RS232 port Static becomes stronger when connecting the video connectors Cannot control the device by RS232 / IR remote / front panel buttons Failed or loose power connection The HDMI cable is broken at the output. The display does not support the resolution of the video source. Wrong connection Wrong RS232 communication parameters Broken RS232 port Bad grounding The device has already been broken. Check whether the cables are connected correctly Change to another HDMI cable which is in good working condition. Switch again. Manage the EDID data manually to make the resolution of the video source automatically compliant with the output resolution. Check to ensure the connection between the control device and the unit Type in correct RS232 communication parameters: Baud rate:9600; Data bit: 8; Stop bit: 1; Parity bit: none Send it to authorized dealer for checking. Check the grounding and make sure it is connected well. Send it to authorized dealer for repairing. If your problem persists after following the above troubleshooting steps, seek further help from an authorized dealer or our technical support team. 17

21 Declaration of Conformity We, ANTIFERENCE LIMITED herewith declare that this matrix switcher complies with all essential requirements and any other applicable conditions set forth on directive EMC2014/30/EU. According to the WEEE (Waste Electrical and Electronic Equipment) EU Directive, do not dispose of this product as household waste or commercial waste. Waste Electrical and Electronic Equipment should be appropriately collected and recycled as required by practices established for your country. For information on recycling of this product, please contact your local authorities, your household waste disposal service or the shop where you purchased the product. A full declaration document can be found on our website 18