SINGLE, BI-PARTING, BYPASSING UP TO 200LBS (CONTACT US FOR HEAVIER PANELS)

Transcription

1 PRODUCT SPECIFICATIONS LOKI TOP MOUNT SINGLE, BI-PARTING, BYPASSING -/8" MINIMUM UP TO 200LBS (CONTACT US FOR HEAVIER PANELS) /4" = '-0" (:6) 5/7/208 DETAIL A SCALE "=' ( : 4) 4 " REQUIRED TRACK STANDOFF " 4 " OPTIONAL TRACK STANDOFF 4 " MIN* 7 6 " MAXIMUM WITH BOTH STANDOFFS* " MAXIMUM WITH 6 ONE STANDOFF* 9 6 " MIN* 5 4 " MINIMUM CLEARANCE ABOVE INSTALLED DOOR PANEL DETAIL C SCALE "=' ( : 4) TROLLEY MOUNTING SCREWS MUST BE INSTALLED IN CROSS-GRAIN. NEVER INSTALL INTO END-GRAIN. 2" RECOMMENDED " TROLLEY * = THESE LIMITS VARY WITH WOOD SPECIES. 7 6 " DOOR STOP 8 " DOOR OPENING DOOR PANEL 4 " 5 8 " 7 6 " MAX DETAIL B SCALE "=' ( : 4) WALL DOOR PANEL DOOR OPENING DOOR GUIDE POST BASEBOARD FLOOR WALL DOOR GUIDE POST** BASEBOARD FLOOR 9 6 " 5 8 " 8 " ** = DOOR GUIDE MAY DIFFER ALL INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF. ANY REPRODUCTION IN WHOLE OR IN PART IS PROHIBITED WITHOUT PRIOR WRITTEN CONSENT. AND THE LOGO ARE REGISTERED TRADEMARKS OF KROWN LAB, INC.

2 PRODUCT SPECIFICATIONS LOKI FACE MOUNT SINGLE & BI-PARTING /4" TO 2-/2"* (CHOOSE TOP MOUNT FOR THICKER PANELS) UP TO 200LBS (CONTACT US FOR HEAVIER PANELS) /4" = '-0" (:6) 5/7/208 * = 2-/2" PANEL WILL HAVE /4" WALL CLEARANCE. DETAIL A SCALE "=' ( : 4) 4 " REQUIRED TRACK STANDOFF " 4 " OR 2 " OPTIONAL TRACK STANDOFF(S) 2 " 4 2 " DETAIL C SCALE "=' ( : 4) 2 4 " WITH THREE STANDOFFS 2" WITH TWO STANDOFFS 4 " RECOMMENDED MAXIMUM 5 4 " MINIMUM CLEARANCE ABOVE INSTALLED DOOR PANEL " WITH ONE 4 STANDOFF 2" RECOMMENDED " TRU-LEVEL TM TROLLEY 7 6 " DOOR STOP DOOR OPENING 5 8 " DOOR PANEL DETAIL B SCALE "=' ( : 4) WALL DOOR PANEL DOOR OPENING DOOR GUIDE POST BASEBOARD FLOOR 4 " WALL DOOR GUIDE POST** BASEBOARD 9 6 " FLOOR 5 8 " 8 " ** = DOOR GUIDE MAY DIFFER ALL INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF. ANY REPRODUCTION IN WHOLE OR IN PART IS PROHIBITED WITHOUT PRIOR WRITTEN CONSENT. AND THE LOGO ARE REGISTERED TRADEMARKS OF KROWN LAB, INC.

3 PRODUCT SPECIFICATIONS LOKI GLASS MOUNT SINGLE, BI-PARTING, BYPASSING /8" TO /2" (CONTACT US FOR PANELS OUTSIDE OF THIS RANGE) UP TO 200LBS (CONTACT US FOR HEAVIER PANELS) /4" = '-0" (:6) 5/7/208 DETAIL A SCALE "=' ( : 4) 4 " MINIMUM " " MAXIMUM 4 " MAXIMUM DETAIL C SCALE "=' ( : 4) 2 " MINIMUM 4 " RECOMMENDED MAXIMUM 5 4 " MINIMUM CLEARANCE ABOVE INSTALLED DOOR PANEL 2" RECOMMENDED " TRU-LEVEL TM TROLLEY GENERIC WALL SHOWN. TRU-LEVEL TRACK DRAWINGS IN FOLLOWING PAGES WILL COVER FRAMED AND GLASS WALL TYPES. 7 6 " DOOR STOP 5 8 " DOOR OPENING DOOR PANEL DETAIL B SCALE "=' ( : 4) WALL DOOR PANEL DOOR OPENING DOOR GUIDE BASEBOARD, TRIM, CHANNEL, ETC FLOOR 4 " WALL DOOR GUIDE* BASEBOARD, TRIM, CHANNEL, ETC FLOOR 8 " * = DOOR GUIDE MAY DIFFER ALL INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF. ANY REPRODUCTION IN WHOLE OR IN PART IS PROHIBITED WITHOUT PRIOR WRITTEN CONSENT. AND THE LOGO ARE REGISTERED TRADEMARKS OF KROWN LAB, INC.

4 PRODUCT SPECIFICATIONS LOKI TOP MOUNT SINGLE, BI-PARTING, BYPASSING -/8" MINIMUM UP TO 200LBS (CONTACT US FOR HEAVIER PANELS) 4" = '-0" (:) 5/7/208 WHAT'S INCLUDED: 2 x - #A0 - LOKI TOP MOUNT TROLLEY KIT x - #A020 - DOOR GUIDE POST KIT (DOOR GUIDE MAY DIFFER - MULTIPLE OPTIONS EXIST) x - #Txxxx - SYSTEM WITH ALL MOUNTING HARDWARE (SEE SEPARATE PAGE) #A0 - LOKI TOP MOUNT TROLLEY KIT (x 2 INCLUDED) #488 - TOP MOUNT PANEL SCREW LOKI TOP MOUNT TROLLEY ASSEMBLY #66 - SAFETY STOP - FLAT #67 - SAFETY STOP - CURVED #64 - SAFETY STOP SCREW #A020 - DOOR GUIDE POST (x INCLUDED*) #06 - BOTTOM GUIDE SCREW #254 - BOTTOM GUIDE POST #69 - BOTTOM GUIDE POST SHIMS * = THE DOOR GUIDE MAY DIFFER - MULTIPLE OPTIONS EXIST ALL INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF. ANY REPRODUCTION IN WHOLE OR IN PART IS PROHIBITED WITHOUT PRIOR WRITTEN CONSENT. AND THE LOGO ARE REGISTERED TRADEMARKS OF KROWN LAB, INC.

5 PRODUCT SPECIFICATIONS LOKI FACE MOUNT SINGLE & BI-PARTING /4" TO 2-/2"* (CHOOSE TOP MOUNT FOR THICKER PANELS) UP TO 200LBS (CONTACT US FOR HEAVIER PANELS) 4" = '-0" (:) 5/7/208 WHAT'S INCLUDED: 2 x - #A - LOKI FACE MOUNT TROLLEY KIT x - #A020 - DOOR GUIDE POST KIT (DOOR GUIDE MAY DIFFER - MULTIPLE OPTIONS EXIST) x - #Txxxx - SYSTEM WITH ALL MOUNTING HARDWARE (SEE SEPARATE PAGE) * = 2-/2" PANEL WILL HAVE /4" WALL CLEARANCE. #A - LOKI FACE MOUNT TROLLEY KIT (x 2 INCLUDED) LOKI FACE MOUNT TROLLEY ASSEMBLY #66 - SAFETY STOP - FLAT #67 - SAFETY STOP - CURVED #64 - SAFETY STOP SCREW #20 - " FACE MOUNT SCREW #09 - -/2" FACE MOUNT SCREW #024-2" FACE MOUNT SCREW #640-2-/2" FACE MOUNT SCREW #A020 - DOOR GUIDE POST KIT (x INCLUDED*) #06 - DOOR GUIDE SCREW #254 - DOOR GUIDE POST #69 - DOOR GUIDE SHIM * = THE DOOR GUIDE MAY DIFFER - MULTIPLE OPTIONS EXIST ALL INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF. ANY REPRODUCTION IN WHOLE OR IN PART IS PROHIBITED WITHOUT PRIOR WRITTEN CONSENT. AND THE LOGO ARE REGISTERED TRADEMARKS OF KROWN LAB, INC.

6 PRODUCT SPECIFICATIONS LOKI GLASS MOUNT SINGLE, BI-PARTING, BYPASSING /8" TO /2" (CONTACT US FOR PANELS OUTSIDE OF THIS RANGE) UP TO 200LBS (CONTACT US FOR HEAVIER PANELS) 4" = '-0" (:) 5/7/208 WHAT'S INCLUDED: 2 x - #A2 - LOKI GLASS MOUNT TROLLEY KIT x - #A29 - DOOR GUIDE KIT (DOOR GUIDE MAY DIFFER - MULTIPLE OPTIONS EXIST) x - #Txxxx - SYSTEM WITH ALL MOUNTING HARDWARE (SEE SEPARATE PAGE) #A2 - LOKI GLASS MOUNT TROLLEY KIT (x 2 INCLUDED) LOKI GLASS MOUNT TROLLEY #66 - SAFETY STOP - FLAT #67 - SAFETY STOP - CURVED #64 - SAFETY STOP SCREW #44 - GLASS PANEL SPACER #56 - GLASS BUSHING #764 - GLASS WASHER #2 - /4" GLASS PANEL SCREW #20 - " GLASS PANEL SCREW #A020 - DOOR GUIDE KIT (x INCLUDED*) #450 - DOOR GUIDE KIT * = THE DOOR GUIDE MAY DIFFER - MULTIPLE OPTIONS EXIST ALL INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF. ANY REPRODUCTION IN WHOLE OR IN PART IS PROHIBITED WITHOUT PRIOR WRITTEN CONSENT. AND THE LOGO ARE REGISTERED TRADEMARKS OF KROWN LAB, INC.

7 PRODUCT SPECIFICATIONS - DOOR CONFIGURATIONS SINGLE, BI-PARTING, BYPASSING TROLLEY SYSTEM OR TRACK CONFIGURATION DEPENDENT TROLLEY SYSTEM OR TRACK CONFIGURATION DEPENDENT /8" = '-0" (:2) /2/208 SINGLE BI-PARTING BYPASSING BI-PARTING-BYPASSING BYPASSING STACKED ALL INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF. ANY REPRODUCTION IN WHOLE OR IN PART IS PROHIBITED WITHOUT PRIOR WRITTEN CONSENT. AND THE LOGO ARE REGISTERED TRADEMARKS OF KROWN LAB, INC.

8 PRODUCT SPECIFICATIONS SINGLE, BI-PARTING, BYPASSING TROLLEY SYSTEM DEPENDENT TROLLEY SYSTEM DEPENDENT 6" = '-0" (:2) /2/208 WHAT'S INCLUDED: x - #Txxxx - SYSTEM WITH ALL MOUNTING HARDWARE: X x - #A252 - STANDARD TRACK MOUNTING KIT 2 x - #A24 - DOOR STOP KIT X x - #A2 - TRACK CONNECTOR KIT ( x PER TRACK JOINT INLCUDED) #Txxxx - SYSTEM #A252 - TRACK MOUNT KIT (QUANTITY MATCHES THE STANDARD TRACK DRILL PATTERN) #A24 - DOOR STOP KIT (x 2 INCLUDED*) #65 - DOOR STOP NUT (NOT SHOWN) #9 - DOOR STOP #78 - /6" DRYWALL SHIM (2x) #44 - /8" DRYWALL INSERT #4 - /2" DRYWALL INSERT #4 - /4" REQUIRED TRACK STANDOFF #64 - DOOR STOP SCREW * = THE DOOR STOP MAY DIFFER - MULTIPLE OPTIONS EXIST VISIT FOR ALL OPTIONS #45 - /4" OPTIONAL TRACK STANDOFF #A27 - TRACK SHIM KIT (NOT INCLUDED) #47 - TRACK SHIM (THICK) #46 - TRACK SHIM (THIN, 2x) #297-A - TRACK WASHER PLATE #66 - TRACK WOOD LAG SCREW TRACK SHIMS ARE DESIGNED TO BE INSTALLED AGAINST TRACK TRACK CAP (SYSTEM DEPENDENT) #8 - END CAP #8 - END CAP SCREW #A2 - TRACK CONNECTOR KIT ( x PER TRACK JOINT INLCUDED) #82 - CONNECTOR SCREW #297-B - TRACK CONNECTOR WASHER PLATE TRACK BASE #7 - TRACK SPRING TRACK COVER #8 - TRACK CONNECTOR NUT ALL INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF. ANY REPRODUCTION IN WHOLE OR IN PART IS PROHIBITED WITHOUT PRIOR WRITTEN CONSENT. AND THE LOGO ARE REGISTERED TRADEMARKS OF KROWN LAB, INC.

9 PRODUCT SPECIFICATIONS - STANDARD TRACK MOUNTING POINT SINGLE, BI-PARTING, BYPASSING TROLLEY SYSTEM DEPENDENT TROLLEY SYSTEM DEPENDENT 6" = '-0" (:2) /2/208 2 " TO 5 8 " DRYWALL " MIN BLOCKING 4 " REQUIRED TRACK STANDOFF 4 " OPTIONAL TRACK STANDOFF 4 " HOLE IN DRYWALL " ALL INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF. ANY REPRODUCTION IN WHOLE OR IN PART IS PROHIBITED WITHOUT PRIOR WRITTEN CONSENT. AND THE LOGO ARE REGISTERED TRADEMARKS OF KROWN LAB, INC.

10 PRODUCT SPECIFICATIONS - TRACK CONNECTOR ALL WALL TYPES SINGLE & BI-PARTING TROLLEY SYSTEM DEPENDENT TROLLEY SYSTEM DEPENDENT 6" = '-0" (:2) /2/208 REQUIRED MOUNTING " FOR ALL TRACK JOINTS 2ND REQUIRED MOUNTING 6" FOR TRACK JOINTS ON S REQUIRED MOUNTING " FOR ALL TRACK JOINTS 2ND REQUIRED MOUNTING 6" FOR TRACK JOINTS ON S #A2 - TRACK CONNECTOR KIT (INCLUDED IN MULTIPLE TRACK SYSTEMS) #8 - TRACK CONNECTOR NUT #297-B - TRACK CONNECTOR WASHER PLATE #82 - CONNECTOR SCREW ALL INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF. ANY REPRODUCTION IN WHOLE OR IN PART IS PROHIBITED WITHOUT PRIOR WRITTEN CONSENT. AND THE LOGO ARE REGISTERED TRADEMARKS OF KROWN LAB, INC.

11 PRODUCT SPECIFICATIONS - PERPENDICULAR TRACK MOUNTING POINT, TILED WALL, GLASS WALL ALL /8" TO /2" (CONTACT US FOR PANELS OUTSIDE OF THIS RANGE) TROLLEY SYSTEM OR TRACK CONFIGURATION DEPENDENT /4" = '-0" (:6) 2/28/208 PERPENDICULAR SCALE: " = '-0" (:4) PERPENDICULAR TILE WALL SCALE: " = '-0" (:4) PERPENDICULAR GLASS WALL SCALE: " = '-0" (:4) 8 " 6 " 8 " 6 " 8 " 6 " 2 " TO 5 8 " DRYWALL 8 " TO 2 " GLASS 5 8 "+ - /2" 0" HOLE SEE GLASS PANEL SPECIFICATIONS PAGE FOR MORE DETAILS " MIN BLOCKING 2 6 " 5 8 " SLOT " MIN BLOCKING 2 4 " 2 4 " " 2 6 " 2 8 " SLOT " HOLES " 2 6 " " HOLES " 2 6 " 7 8 " HOLES ADJUSTABLE PERPENDICULAR TRACK MOUNT KIT FOR S (NOT INCLUDED) #682 - /4" DRYWALL INSERT #68 - DRYWALL SHIM #490 - HEIGHT ADJUSTMENT SCREW #487 - TRACK SUPPORT SOCKET #489 - SCREW PLATE #488 - #4 SCREW #68 - END CAP SCREW #496 - SOCKET END CAP ADJUSTABLE PERPENDICULAR TRACK MOUNT KIT FOR TILE WALLS (NOT INCLUDED) #490 - HEIGHT ADJUSTMENT SCREW #487 - TRACK SUPPORT SOCKET #489 - SCREW PLATE #488 - #4 SCREW #68 - END CAP SCREW #496 - SOCKET END CAP #A24 - ADJUSTABLE PERPENDICULAR TRACK MOUNT KIT FOR GLASS WALLS (NOT INCLUDED) #20 - SOCKET SCREWS #494 - SOCKET WASHER PLATE #49 - GLASS BUSHING #487 - TRACK SUPPORT SOCKET #68 - END CAP SCREW #496 - SOCKET END CAP #49 - SOCKET SCREWS #65 - TRACK NUT #49 - SOCKET SCREWS #65 - TRACK NUT #49 - SOCKET SCREWS #65 - TRACK NUT ALL INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF. ANY REPRODUCTION IN WHOLE OR IN PART IS PROHIBITED WITHOUT PRIOR WRITTEN CONSENT. AND THE LOGO ARE REGISTERED TRADEMARKS OF KROWN LAB, INC.

12 PRODUCT SPECIFICATIONS - PERPENDICULAR TRACK MOUNTING POINT SINGLE, BI-PARTING, BYPASSING TROLLEY SYSTEM DEPENDENT TROLLEY SYSTEM OR TRACK CONFIGURATION DEPENDENT /4" = '-0" (:6) 2/28/208 INSTALLED INTO STRUCTURAL BLOCKING (OPTIMAL) INSTALLED INTO WOOD STUDS SPAN (X) UP TO 8" UP TO 44" UP TO 50" UP TO 62" MAX. PANEL WEIGHT 00lb 275lb 250lb 225lb SPAN (X) UP TO 8" UP TO 44" UP TO 50" MAX. PANEL WEIGHT 50lb 25lb 00lb " 6" MAX X X ALL INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF. ANY REPRODUCTION IN WHOLE OR IN PART IS PROHIBITED WITHOUT PRIOR WRITTEN CONSENT. AND THE LOGO ARE REGISTERED TRADEMARKS OF KROWN LAB, INC.

13 DOCUMENT: PRODUCT SPECIFICATIONS - BYPASSING WITH CENTER MOUNT BYPASSING " = '-0" (:2) TRU-LEVEL TRACK TROLLEY SYSTEM OR BYPASSING DEPENDENT TROLLEY SYSTEM OR TRACK LENGTH DEPENDENT /0/208 TM BYPASSING TRACKS ARE ONLY AVAILABLE MADE-TO-MEASURE AND PRE-DRILLED. IT IS RECOMMENDED TO CONTACT US BEFORE ORDERING DOOR PANELS TO OPTIMIZE DOOR TRAVEL. COMBINED TOTAL PANEL WIDTH SHOULD BE WIDER THAN THE OPENING BY 4" MINIMUM TO OPTMIZE DOOR TRAVEL: TRACK MUST BE CENTERED OVER OPENING CENTER MOUNT FOR FRONT TRACK TRACK LENGTH MAX. PANEL WEIGHT* UP TO 9FT UP TO FT UP TO 2FT UP TO FT 225lb 200lb 75lb 50lb *EACH PANEL SCALE /2" = ' (:24) " MINIMUM FOR BYPASSING SYSTEMS MINUMUM DOOR PANEL WIDTH = OPENING 2 + 7" REAR PANEL AND TROLLEYS MUST STRADDLE THE CENTER MOUNT OF THE FRONT TRACK DOOR OPENING 0" MANDATORY PANEL OVERLAP CENTER MOUNT FOR FRONT TRACK 2" RECOMMENDED MINIMUM OVERLAP CL OF BYPASSING SYSTEM ALL INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF. ANY REPRODUCTION IN WHOLE OR IN PART IS PROHIBITED WITHOUT PRIOR WRITTEN CONSENT. AND THE LOGO ARE REGISTERED TRADEMARKS OF KROWN LAB, INC. DETAIL A SCALE 6" = ' ( : 2)

14 PRODUCT SPECIFICATIONS - BYPASSING WITHOUT CENTER MOUNT BYPASSING TROLLEY SYSTEM OR BYPASSING DEPENDENT TRACK LENGTH DEPENDENT " = '-0" (:2) /0/208 BYPASSING TRACKS ARE ONLY AVAILABLE MADE-TO-MEASURE AND PRE-DRILLED. IT IS RECOMMENDED TO CONTACT US BEFORE ORDERING DOOR PANELS TO OPTIMIZE DOOR TRAVEL. COMBINED TOTAL PANEL WIDTH SHOULD BE WIDER THAN THE OPENING BY 6" MINIMUM TO OPTMIZE DOOR TRAVEL: TRACK MUST BE CENTERED OVER OPENING TRACK LENGTH UP TO 4FT UP TO 5FT UP TO 6FT MAX. PANEL WEIGHT* 50lb 25lb 85lb *EACH PANEL " MINIMUM FOR BYPASSING SYSTEMS SCALE /2" = ' (:24) MINUMUM DOOR PANEL WIDTH = OPENING + " 2 DOOR OPENING 2" RECOMMENDED PANEL OVERLAP 2" RECOMMENDED MINIMUM OVERLAP C L OF BYPASSING SYSTEM DETAIL A SCALE 6" = ' ( : 2) ALL INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF. ANY REPRODUCTION IN WHOLE OR IN PART IS PROHIBITED WITHOUT PRIOR WRITTEN CONSENT. AND THE LOGO ARE REGISTERED TRADEMARKS OF KROWN LAB, INC.

15 PRODUCT SPECIFICATIONS - BYPASSING STACKED BYPASSING STACKED TROLLEY SYSTEM OR BYPASSING DEPENDENT TRACK CONFIGURATION, TRACK LENGTH OR TROLLEY SYSTEM DEPENDENT " = '-0" (:2) /0/208 BYPASSING STACKED TRACKS ARE ONLY AVAILABLE MADE-TO-MEASURE AND PRE-DRILLED. IT IS RECOMMENDED TO CONTACT US BEFORE ORDERING DOOR PANELS TO OPTIMIZE DOOR TRAVEL. COMBINED TOTAL PANEL WIDTH SHOULD BE WIDER THAN THE OPENING BY THE FOLLOWING AMOUNT TO OPTMIZE DOOR TRAVEL: WITH OPTIONAL CENTER MOUNT: 4" MINIMUM* WITHOUT OPTIONAL CENTER MOUNT: 6" MINIMUM* FRONT TRACK SUPPORT REGION ONLY THE FRONT PANEL CAN REACH THIS SECTION. BYPASSING TRACK REGION (WITH OR WITHOUT OPTIONAL CENTER MOUNT) THE REAR PANEL IS RESTRICTED TO MOVEMENT WITHIN THIS SECTION. OPTIONAL CENTER MOUNT (SEE PREVIOUS PAGES FOR MAX PANEL WEIGHT IMPLICATIONS) FRONT PANEL REAR PANEL DOOR OPENING STACKED PANEL AREA 2" RECOMMENDED MINIMUM OVERLAP* 2" RECOMMENDED PANEL OVERLAP* WITH OPTIONAL CENTER MOUNT: 0" MANDATORY PANEL OVERLAP* (SHOWN HERE) WITHOUT OPTIONAL CENTER MOUNT: 2" RECOMMENDED MINUMUM OVERLAP* (NOT SHOWN) FRONT PANEL WILL REQUIRE SPECIAL BOTTOM GUIDE ACCOMODATIONS. CONTACT FOR DETAILS. * = THESE ARE MINIMUMS. EXCEEDING THESE VALUES IS RECOMMENDED TO INCREASE PRIVACY IN SOME INSTALLATIONS. ALL INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF. ANY REPRODUCTION IN WHOLE OR IN PART IS PROHIBITED WITHOUT PRIOR WRITTEN CONSENT. AND THE LOGO ARE REGISTERED TRADEMARKS OF KROWN LAB, INC.

16 PRODUCT SPECIFICATIONS - BYPASSING PANEL CLEARANCE BYPASSING TROLLEY SYSTEM OR BYPASSING DEPENDENT SYSTEM DEPENDENT AND TRACK LENGTH DEPENDENT " = '-0" (:2) /2/208 MOUNTING STYLE PANEL THICKNESS* TOP MOUNT -/8" TO 2-/2" FACE MOUNT** /4" TO -/8" GLASS MOUNT /8" - /2" *NOT ACCOUNTING FOR BASEBOARD (IF EXISTING) OR OPTIONAL DOOR PULLS **ODEN AND BALDUR ONLY TOP MOUNT FACE MOUNT** (**ODEN AND BALDUR ONLY) GLASS MOUNT " GENERIC TROLLEY FOR CONTEXT ONLY 5 6 " GENERIC TROLLEY FOR CONTEXT ONLY " GENERIC TROLLEY FOR CONTEXT ONLY 4 " OPTIONAL TRACK STANDOFF 4 " OPTIONAL TRACK STANDOFF 4 " OPTIONAL TRACK STANDOFF 4 " REQUIRED TRACK STANDOFF REQUIRED TRACK STANDOFFS 4 " REQUIRED TRACK STANDOFF REQUIRED TRACK STANDOFFS 4 " REQUIRED TRACK STANDOFF REQUIRED TRACK STANDOFFS CONSIDER BASEBOARD, TRIM AND DOOR PULLS 6 " FIXED TROLLEY FOOT DISTANCE CONSIDER BASEBOARD, TRIM AND DOOR PULLS 7 8 " CONSIDER BASEBOARD, TRIM AND DOOR PULLS " MAXIMUM WITH BOTH STANDOFFS 2 " MAXIMUM WITH 4 ONE STANDOFF 5 6 " RECOMMENDED MINIMUM GAP CONSIDER CLEARANCE REQUIREMENTS FOR FLUSH MOUNTED PULLS. THE EBBA DOOR PULL PROTRUDES /6". 6 " MAXIMUM WITH BOTH STANDOFFS 6 " MAXIMUM WITH ONE STANDOFF 2 6 " CONSIDER CLEARANCE REQUIREMENTS FOR FLUSH MOUNTED PULLS. THE EBBA DOOR PULL PROTRUDES /6". 4 " MAXIMUM 2 " MINIMUM 5 6 " CONSIDER CLEARANCE REQUIREMENTS FOR FLUSH MOUNTED PULLS. THE EBBA DOOR PULL PROTRUDES /6". ALL INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF. ANY REPRODUCTION IN WHOLE OR IN PART IS PROHIBITED WITHOUT PRIOR WRITTEN CONSENT. AND THE LOGO ARE REGISTERED TRADEMARKS OF KROWN LAB, INC.

17 PRODUCT SPECIFICATIONS - UNDRILLED TRACK DRILL PATTERN GUIDE SINGLE & BI-PARTING TROLLEY SYSTEM DEPENDENT SEE BELOW " = '-0" (:2) 9/25/208 STUD DRILL PATTERN: (250LB MAX* PER TRACK) X 6" MAX 2" MAX 6" MAX 2" MAX 6" MAX X CONNECTING MULITPLE TRACKS REQUIRE SPECIAL DRILL PATTERN AT JOINT. SEE TRACK CONNECTOR PAGE FOR DETAILS. PANEL WEIGHT X MOUNTING POINTS UP TO 00 LBS 5" 4 MINIMUM 0 TO 200 LBS 4" 6 MINIMUM 20 TO 250 LBS " 6 MINIMUM "X" IS THE MAXIMUM LENGTH OF TRACK ALLOWED BEYOND END MOUNTING POINTS 9 6 " THRU ALL STRUCTURAL BLOCKING DRILL PATTERN: (400LB MAX* PER TRACK) " " 24" MAX 24" MAX " 24" MAX 24" MAX " " 6 MOUNTING POINTS IS THE MINIMUM FOR THIS TRACK PATTERN 9 6 " THRU ALL * WEIGHT LIMIT MAY BE FURTHER RESTRICTED BY TROLLEY SYSTEM ALL INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF. ANY REPRODUCTION IN WHOLE OR IN PART IS PROHIBITED WITHOUT PRIOR WRITTEN CONSENT. AND THE LOGO ARE REGISTERED TRADEMARKS OF KROWN LAB, INC.

18 PRODUCT SPECIFICATIONS - BYPASSING TRACK DRILL PATTERN GUIDE BYPASSING TROLLEY SYSTEM OR BYPASSING DEPENDENT TRACK CONFIGURATION, TRACK LENGTH OR TROLLEY SYSTEM DEPENDENT " = '-0" (:2) /2/208 BYPASSING TRACKS ARE ONLY AVAILABLE MADE-TO-MEASURE. WILL CONFIGURE THE FRONT AND REAR TRACKS USING THE RULES BELOW: TRACK-TO-TRACK CENTER MOUNT DRILL PATTERN TRACK-TO-TRACK END MOUNT DRILL PATTERN 9 4X 6 " STANDARD MOUNTING POINTS 9 X 6 " STANDARD MOUNTING POINTS REAR TRACK " " 8" UP TO 0" UP TO 0" 8" " 8" UP TO 0" UP TO 0" 8" " " " 9 6 " STANDARD MOUNTING POINTS OUTSIDE TRACK-TO-TRACK CONNECTIONS 2 " 2 " TRACK-TO-TRACK MOUNTING POINT 2 " " 2 " TRACK-TO-TRACK MOUNTING POINT C L 2 " TRACK-TO-TRACK MOUNTING POINT 2 " TRACK-TO-TRACK MOUNTING POINT FRONT TRACK ALL INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF. ANY REPRODUCTION IN WHOLE OR IN PART IS PROHIBITED WITHOUT PRIOR WRITTEN CONSENT. AND THE LOGO ARE REGISTERED TRADEMARKS OF KROWN LAB, INC.

19 PRODUCT SPECIFICATIONS - GLASS DOOR PANEL SPECIFICATIONS SINGLE, BI-PARTING, BYPASSING /8" TO /2" (CONTACT US FOR PANELS OUTSIDE OF THIS RANGE) TROLLEY SYSTEM OR TRACK CONFIGURATION DEPENDENT " = '-0" (:2) 5/7/208 GLASS PANELS MUST BE FLAT POLISHED AND HAVE A MM CHAMFER ON ALL EDGES. ALL HOLES MUST BE DRILLED OR CNC MACHINED WITH STRAIGHT WALLS AND SEAMED EDGES. DO NOT WATER-JET - NO TAPERED HOLES. ALL TEMPERED GLASS IS SUBJECT TO EXPERIENCE SPONTANIOUS BREAKAGE. IT IS THE BUYERS RESPONSIBILITY TO DETERMINE AND APPROVE GLASS SPECIFICATION(S) SUITABLE TO MEET ALL FACTORS RELEVANT TO THEIR PARTICULAR USE OR APPLICATION IN CONJUNCTION WITH ALL KROWN LAB, INC.'S PRODUCTS. REFERENCE ASTM C048, TROLLEY ATTACHMENT POINTS: LOKI TROLLEYS ONLY TROLLEY ATTACHMENT POINTS: ODEN AND BALDUR TROLLEYS ONLY 4" RECOMMENDED 4" RECOMMENDED 2 "± 2 " "± 2 " 4 "+ - /2" 0" (LOKI ONLY) 2 "± 2 " "± 2 " 5 8 "+ - /2" 0" (ODEN & BALDUR ONLY) DETAIL A SCALE : 6 DETAIL B SCALE : 6 ALL INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF. ANY REPRODUCTION IN WHOLE OR IN PART IS PROHIBITED WITHOUT PRIOR WRITTEN CONSENT. AND THE LOGO ARE REGISTERED TRADEMARKS OF KROWN LAB, INC.