Professional EFI Systems Product Catalog
|
|
- Opal Daniel
- 5 years ago
- Views:
Transcription
1 Professional EFI Systems Product Catalog Table of Contents: Section 1: ECU Options 2-8 Section 2: Various Sensors and Switches 9-14 Section 3: Display Options 15 Section 4: CAN Communication Cable 16 Section 5: Adapter Harness Section 6: Plugs, Pins and Miscellaneous Page - 1
2 ECU Options 9100 ProEFI 128ECU kit Retail: ProEFI /705 ECU kit Retail: Page - 2
3 The Pro128 uses a Freescale MPC 565 processor at 56mhz. The Pro48 uses a Motorola MPC 563 processor at 56mhz ECU Environmental Ratings The ECM is designed to meet automotive industry standard under hood environmental requirements for 12v and 24v systems, and also meets marine industry environmental requirements. Validation tests included extreme operating temperatures (-40* to +105*C), thermal shock, humidity, salt spray, salt fog, immersion, fluid resistance, mechanical shock, vibration, and EMC. It is the responsibility of the application engineer to assure that the application does not exceed the demonstrated capabilities of the unit; vibration or thermal. It may be necessary to perform additional tests to validate the unit in the application. Page - 3 Features of the Pro128 Injectors - 12 peak n hold with calibratable peak time Coils - 16 TPS: Yes adaptive Coolant Temp Yes Air Temp Yes MAP Yes; unlimited range Idle Control Pulse width and stepper motor; adaptive Wideband 02 2 Built in UEGO controllers (external capable)
4 Page - 4 Professional EFI Systems Product Catalog 2012 CAM Yes Hall/VR capable CRANK Yes Hall/VR capable Variable CAM Yes 2 cam capable Knock Controls 2 Programmable frequency and event with individual cylinder notification Flex Fuel Capability Add a flex fuel sensor, and the computer automatically adjusts fuel, timing, and boost based on ethanol content. Nitrous Control 4 Stages multiple event trigger control range. V.E. based fueling**** Boost Control Multiple Control Strategies*** Traction Control Multiple Control Strategies*** Fuel Pump Control Yes* Analog inputs 34 Fuel Pressure monitoring and feedback correction, Oil pressure, Exhaust backpressure feedback and correction, and much more Low Side Outputs 10 total 8-10amp capable 2-2 amp capable Tachometer Yes Software configurable Digital inputs 8 channels; fully programmable pre configured High Current Bridges 3 Channel sets; used for stepper motor control, or electronic throttle control Speed Inputs 2 Drive By Wire Yes
5 Key Switch Power Yes Permanent Power Yes Battery Backup No Chassis Ground 4 Locations CAN channels 2 Channels Serial Connection Yes***** RS485 Connection Yes***** Internal Memory Limited to Fault Logic USB Direct Connection No Laptop Connection USB Page - 5 Features of the Pro48 Drive By Wire Yes Injectors 4 Peak n Hold Coils 8 TPS Yes; adaptive Coolant Temp Yes Air Temp Yes MAP sensor Yes unlimited Range Flex Fuel Yes; requires additional signal conditioning
6 Idle Control Pulse width and stepper motor; adaptive Wideband 02 External driver required 2 channel capable CAM Yes; Hall/VR capable CRANK Yes Hall/VR capable Variable CAM Yes Traction Control CAN based applications only! Nitrous Control 4 Stages; V.E. Based**** Boost Control Multiple Control Strategies*** Launch Control Multiple control strategies*** Fuel Pump control Yes* Analog Inputs 14* Low Side Outputs 6 6amp capable low side outputs* Tachometer Yes software configurable High Current Bridges 1 Channel set used for stepper motor control Speed Inputs None Drive By Wire Yes Fault Coding Safety Yes** MIL (CEL) Yes Malfunction indicator with fault codes Battery Backup No Chassis Ground 2 Locations Page - 6
7 CAN channels 1 Channel Serial Connection No RS485 Connection No Internal Memory Limited to Fault logic USB Direct connection USB on PC; CAN connection at ECU Logging with PC attached included on all ECU s. If logging without the PC connected is required, you must purchase one of the external loggers. This module simply connects through the CAN bus and is configurable, however it is preconfigured by ProEFI for common channels to be logged. *The amount of available channels is dependent upon the use of preconfigured I/O such as Fuel pump, TPS, etc **Fault coding is a strategy used by the O.E. manufacturers. This strategy allows for the capability to trigger faults and fault actions. Features include but are not limited to multiple safety strategies for limiting boost and shutting off nitrous control under lean conditions. See your Authorized ProEFI dealer for more information. ***Multiple strategies are configurable based upon time or speed. See your Authorized ProEFI dealer for more information. ****V.E. stands for volumetric efficiency. This is a strategy incorporated by the O.E. manufacturers to more accurately determine the fueling requirements of the engine. There are several advantages Page - 7
8 to using this method. See your Authorized ProEFI dealer for more information. *****These communication ports are dedicated for the use of future external peripherals to be announced by ProEFI at a later date. Adaptive is a term meaning that a particular feature will self tune itself constantly. This is another strategy used by the O.E. manufacturers to help keep the vehicle in a constant state of tune for hundreds of thousands of miles. Page - 8
9 VARIOUS SENSORS and SWITCHES Pressure Sensors: 3.5bar, 5bar, 7bar and 150psi, 500psi, 2000psi Retail: Page - 9
10 9006 Air Temperature sensor kit with plug and pins Retail: Coolant sensor kit with plug and pins Retail: Page - 10
11 9013/9014 Exhaust Back Pressure kit with selected sensor (5bar shown) Retail: Flex Fuel Sensor kit with adapter fittings, cable, and instructions Retail: Page - 11
12 9007 Boost Control Solenoid kit with connector and pins Retail: I-boost Assembly kit Retail: Page - 12
13 9022 EGT sensor kit (sensor and harness) Retail: LSU 4.2 O2 sensor kit with UEGO cable and instructions Retail: Page - 13
14 Channel Ghost Monitor Retail: Signal Conditioner Pulse to Voltage Converter Retail: Page - 14
15 DISPLAY OPTIONS 6000 ProEFI 52mm CAN gauge Retail: CAN Display kit with cable and instructions Retail: Page - 15
16 CAN1 COMMUNICATION CABLE (Required for software-ecu connection) 9016 CAN1 Communication Cable kit Retail: Page - 16
17 ADAPTER HARNESS Call for custom applications and add-ons 9200/9202 Plug and Pin kit w/ecu Communication Cable (DIY wiring) Pro128 Pro48 Retail: Mitsubishi EVO8 Harness Retail; Page - 17
18 Lexus IS300 Harness Retail: Nissan R32/33/34 Skyline Harness Retail: Page - 18
19 4704 Nissan R35 GTR Harness Retail: Ford Cobra Mustang Adapter Harness W/O Ignitors W/Ignitors Retail: Page - 19
20 4000/ and 24 Flying Lead Harness w/main relay and Communication adapter cable 9 24 Retail: ProEFI Toyota Supra MKIV Adapter harness 6SPD AUTO Retail: Page - 20
21 Porsche /997 Turbo Adapter Harness Retail: BMW E46 M3 Adapter Harness Retail: Page - 21
22 PLUGS, PINS, CONNECTORS and MISC J1A 32pin plug fills J1A plug on 128ECU Retail: J1B and J2B plug for the Pro128 and Plug B for the Pro48 Retail: J1C and J2A plug for the Pro128 and Plug A for the Pro48 Retail: Page - 22
23 3414 SmartCraft Female 10pin connector for CAN1 communication cable Retail: SmartCraft Male 10pin connector for CAN1 communication cable Retail: 5.21 Page - 23
24 3003 LSU 4.2 Connector for UEGO cable Retail: Relay Retail: 9.47 Page - 24
25 8005 ProEFI Lightning Smart Coil coil only Retail: ProEFI High Output Lightning Coil coil only Retail: Page - 25
26 Channel Igniter Retail: Channel Igniter Retail: Page - 26
27 Deutch 12way Plugs Male Female Retail: Deutch 12way wedge lock Male 3505 Female Retail: (Lock) 3406 (Connector) 3 Pin connector Retail: Page - 27
28 3053 (Male) 3052 (Female) Sumitomo 4way connector Retail: (Male) 3050 (Female) Sumitomo 2way connector Retail: Page - 28
29 3417/3418 Female Terminal for SmartCraft connector Retail: /3055 Sumitomo Pin for white Sumitomo connectors Female & Male Retail: 2.99 Deutch Male Pin for Deutch Connectors Male (3506) Female (3500) Retail: Page - 29
30 *Prices are subject to change without notice and at any time. Contact ProEFI or any of our authorized dealers for more information and related products. ProEFI is here to help M-F 9AM-5PM. (480) Page - 30
/8H Infinity Hardware Specification STOP! THIS PRODUCT HAS LEGAL RESTRICTIONS. READ THIS BEFORE INSTALLING/USING!
Instruction Manual 30-7106/8H Infinity Hardware Specification STOP! THIS PRODUCT HAS LEGAL RESTRICTIONS. READ THIS BEFORE INSTALLING/USING! THIS PRODUCT MAY BE USED SOLELY ON VEHICLES USED IN SANCTIONED
More informationIndex. What is FIRESTORM? Find out on the next page. What is Mallory FIRESTORM...3. Features & Benefits...4. Dare to Compare Charts...
BUYERS GUIDE Index What is Mallory FIRESTORM...3 Features & Benefits...4 What is FIRESTORM? Find out on the next page. Dare to Compare Charts... 5-11 How to Buy... 12-14 New Product Data Sheets...Appendix
More informationEMTRON AUSTRALIA EMTRON ECU OVERVIEW
EMTRON AUSTRALIA EMTRON ECU OVERVIEW Table of Contents 1.0 General... 3 2.0 Injection... 4 3.0 Ignition... 5 4.0 Digital Inputs... 6 5.0 Auxiliary Outputs... 7 6.0 Analog Inputs... 9 7.0 Crank and Cam
More informationMTX-D Ethanol Content and Fuel Temperature Gauge User Manual
MTX-D Ethanol Content and Fuel Temperature Gauge User Manual P/N 3912 kit does not include flex fuel sensor. The ECF-1 is compatible with GM P/Ns 13577429 and 13577379 1. Installation... 2 1.1 Gauge Mounting...
More informationPlug and Play FT500 Harness. Installation and Operation Guide
Plug and Play FT500 Harness Installation and Operation Guide PRO wiring harness 1. Index 2. Presentation... 4 3. Warranty terms... 5 4. Specifications:... 6 5. Overview... 7 5.1 PRO16 Wiring harness...
More informationCH1. Figure 1: M3 LOG Advanced
TECHNICAL DOCUMENTATION 03/09/2003 GAUGE Notes: M3 LOG Advanced technical documentation, dimensions and pinout. Ver 1.05 M3 LOG Advanced Internal lateral accelerometer CH1 Beacon Speed COM Power CH2 CH3
More informationPart Number N AEM 4-CH WIDEBAND UEGO CONTROLLER WITH NASCAR SPEC ECU CAN CONFIGURATION
Part Number 30-2340-N AEM 4-CH WIDEBAND UEGO CONTROLLER WITH NASCAR SPEC ECU CAN CONFIGURATION FIGURE 1. WIRING DIAGRAM AEM 4 CH UEGO Controller Parts 1 x 35-2340 4 CH UEGO Module 1 x 35-2908 Wiring Harness
More informationECM Family of General Control Modules Calibratible / Flash
Datasheet 36301 (Rev. A) Description MotoHawk Control Solutions ECM 0555 048 Family of General Control Modules Calibratible / Flash Presenting the ECM-0555-048 family of engine control modules from Woodward
More informationAiM Infotech. Hondata KPro4. Release 1.01
AiM Infotech Hondata KPro4 Release 1.01 1 Supported model This tutorial explains how to connect Hondata ECU to AiM devices. Supported model is: Hondata K-Pro4 to AiM devices. 2 Software setup The ECU comes
More informationMegasquirt Plug and Play Toyota Supra 1JZ-GTE / 7M-GTE
Megasquirt Plug and Play Toyota Supra 1JZ-GTE / 7M-GTE User Manual Table of content Steps to install the Megasquirt Plug and Play ECU... 4 1. Installation of TunerStudio and MegaLogViewer (for Windows,
More informationGCM C/F General Purpose Control Modules Calibratible / Flash
Datasheet 36370 Description MotoHawk Control Solutions GCM 5554 112 1001 C/F General Purpose Control Modules Calibratible / Flash (1001 C: 1751 6457) (1001 F: 1751 6456) Presenting the GCM-5554-112-1001-C/F
More informationDigital Dash I/O Adapter Configuration
Digital Dash I/O Adapter Configuration The I/O Adapter adds ten inputs/outputs to the 7 digital dash. These inputs and outputs can then be configured as gauges or switches, and data logged locally through
More informationVersion 2.031, Firmware doesn't contain all listed features and fixes is the proper one
Version 2.035, 29-03-2017 Bug from versions 2.030 2.034 with pullups when BT CAN stream enabled fixed, Gear detection bug fixed 1JZ/2JZ CAM#2 support added for faster synchronization For ALS pedal position
More informationSeries 3 Marine Adapter MEFI THIS PRODUCT IS LEGAL IN CALIFORNIA FOR RACING VEHICLES ONLY AND SHOULD NEVER BE USED ON PUBLIC HIGHWAYS.
Series 3 Marine Adapter MEFI4 30-3829 THIS PRODUCT IS EGA IN CAIFORNIA FOR RACING VEHICES ONY AND SHOUD NEVER BE USED ON PUBIC HIGHWAYS. AEM Performance Electronics AEM Performance Electronics, 05 126th
More informationECUs F42. F88 Series. F90 Series
ECUs F42 The F42 ECU is a powerful yet compact unit with all of the same LR features used on our existing families. Designed specifically where cost is paramount, this ECU can control engines from one
More informationMS3-PNP version Toyota Supra 1JZ-GTE / 7M-GTE. User Manual for MS3-PNP version 2 only
MS3-PNP version 2 1989-1992 Toyota Supra 1JZ-GTE / 7M-GTE User Manual for MS3-PNP version 2 only Table of content Installation of TunerStudio and MegaLogViewer (for Windows, Mac and Linux)... 3 Software
More informationAn ISO 9001:2008 Registered Company
An ISO 9001:2008 Registered Company Upfitter Interface Module The following list represents firmware v4.30 A-UIM4-506-A 2011-2016 Ford F250-550 B-UIM4-506-A 2017 F250-F550 A-UIM4-751-A 2013-2017 1500-5500
More information12.3 Pro Dash Quick Start Guide
12.3 Pro Dash Quick Start Guide 553-111 CONTENTS: Package Contents... 3 Mounting... 3 Connections... 4 Main Connector... 4 CAN Extension Harness... 6 USB... 7 GPS Antenna... 7 Cleaning... 7 Touchscreen
More informationTable of Contents MOTOROLA SEQUENTIAL MOTOROLA BACKWARD APPENDIX C. PIN CONNECTIONS SERIAL DATA OUT CONNECTOR...
Table of Contents INTRODUCTION... 3 PARTS SUPPLIED... 3 BEFORE YOU BEGIN... 3 DESCRIPTION OF OPERATION... 4 RT MESSAGE... 4 CAN ID LENGTH... 4 CAN ID... 5 FILTER LOCATION... 5 FILTER VALUE... 5 START BIT...
More informationV5 Build 100 SOFTWARE AND FIRMWARE UPDATES
V5 Build 100 SOFTWARE AND FIRMWARE UPDATES Who should update: It is recommended that any user update to this latest version of software and firmware. There are improvements to laptop communication speeds
More informationTable of Contents. Table of Contents
Table of Contents Table of Contents Introduction... 3 Installing a V Series Data Logger... 5 Getting acquainted with your V Series Logger System... 5 The Data Loggers... 5 The System Components... 6 Planning
More informationMTX-A Temperature Gauge User Manual
MTX-A Temperature Gauge User Manual 1. Installation... 2 1.1 Gauge Mounting... 2 1.2 Temperature Sensor Mounting... 2 1.2.1 Changing the MTX-A s Gauge Bezel... 2 1.3 Main Gauge Wiring... 3 1.3.1 Single
More informationVersion 2.063b, D tables bug introduced in version fixed
Version 2.066, 02-03-2018 FIAT 500 reverse gear information send over CAN (hill holder bug fixed). The reverse gear switch should be connected to the switch 1 input Version 2.065, 02-03-2018 Astra VRX
More informationINTRODUCTION. Warning: it is strongly recommended to always verify whether the ECU needs specific software settings to export data.
Link G4 ECU INTRODUCTION AIM has developed special applications for many of the most common ECUs: by special applications we mean user-friendly systems which allow to easily connect your ECU to our hi-tech
More informationP/N AQ-1 DATA LOGGER
Instruction Manual P/N 30-2500 AQ-1 DATA LOGGER STOP! - READ THIS BEFORE INSTALL OR USE! WARNING: THIS INSTALLATION MAY REQUIRE WELDING OR INTEGRATION INTO A VEHICLE'S ELECTRICAL SYSTEM. DAMAGE TO SENSITIVE
More informationTECHNICAL DOCUMENTATION 10/10/2005 GAUGE. MyChron 3 LOG BIKE. Introduction. Notes: MyChron 3 LOG BIKE technical documentation Version 1.
TECHNICAL DOCUMENTATION 10/10/2005 GAUGE Notes: MyChron 3 LOG BIKE technical documentation Version 1.06 MyChron 3 LOG BIKE Figure 1: MyChron 3 LOG BIKE Introduction MyChron 3 LOG BIKE represents the perfect
More informationVi-PEC V44 and V88 ECU
Vi-PEC V44 and V88 ECU INTRODUCTION Vi-PEC V44 and V88 No Adapter ECU AIM has developed special applications for many of the most common ECUs: by special applications we mean user-friendly systems which
More informationInstruction Manual P/N CH WIDEBAND UEGO CONTROLLER
Instruction Manual P/N 30-2340 4-CH WIDEBAND UEGO CONTROLLER! WARNING: This installation is not for the electronic novice or the PC illiterate! Use this system with EXTREME caution! If you are not well
More informationMXL PRO 05 PLUG & PLAY KIT FOR SUZUKI GSX R YOSHIMURA RACING HARNESS cc
INSTALLATION DOCUMENTATION 18/11/2005 P&P KIT Installation Manual: MXL PRO 05 P&P kit for SUZUKI GSX R Yoshimura Racing Harness 2004 2005 1000 cc Version 1.00 Suzuki GSX-R Yoshimura Racing Harness 1000cc
More informationFigure 1 Wide-Band Oxygen Sensor Connectors
Twin Tec TCFI III and ThunderMax Comparison INSTALLATION The Twin TEC TCFI III system includes the TCFI III engine control module (ECM) and a separate WEGO IIID wideband oxygen sensor interface. The TCFI
More informationAMBER/WHITE 270 SCALE
AMBER/WHITE 270 SCALE ALL ELECTRIC GAUGES PERFORM SELF CHECK NEEDLE SWEEP ON START-UP ALSO AVAILABLE IN 60mm (2 3/8 ) 216BFWABOSM 216BFWAEBOSM 216BFWAOPSM 216BFWAEGTSM MECHANICAL 52mm EXHAUST GAS TEMP
More informationMOTO M -1 Use s r manu n al
MOTO-1 User manual Operate introduction Dear user Your purchased tool is belong to the MOTO-1 series, it cover all our technology and experience in many years. The tool will be a very useful work partner
More informationWHIPPLE FLARE FLASH Instruction Manual
WHIPPLE FLARE FLASH Instruction Manual 2015 AND UP Ford MUSTANG/F150 WHIPPLE SUPERCHARGERS 3292 NORTH WEBER AVE FRESNO, CA 93722 TEL 559.442.1261 FAX 559.442.4153 A color PDF of this manual is available,
More informationInfinity 58X LS Engine Harness System User Manual
Infinity 58X LS Engine Harness System User Manual 30-3801 THIS PRODUCT IS LEGAL IN CALIFORNIA FOR RACING VEHICLES ONLY AND SHOULD NEVER BE USED ON PUBLIC HIGHWAYS. AEM Performance Electronics AEM Performance
More informationSECTION B: Anti-Theft Passive Anti-Theft System (PATS) DIAGNOSIS AND TESTING Procedure revision date: 05/23/2008
SECTION 419-01B: Anti-Theft Passive Anti-Theft System (PATS) 2009 Mustang Workshop Manual DIAGNOSIS AND TESTING Procedure revision date: 05/23/2008 Anti-Theft Special Tool(s) 73III Automotive Meter 105-R0057
More informationINTRODUCTION. Warning: it is strongly recommended to always verify whether the ECU needs specific software settings to export data.
Link G4 ECU INTRODUCTION AIM has developed special applications for many of the most common ECUs: by special applications we mean user-friendly systems which allow to easily connect your ECU to our hi-tech
More informationTT /12b INSTALLATION INSTRUCTIONS. Introduction
TT-1545 11/12b INSTALLATION INSTRUCTIONS Original Issue Date: 6/10 Model: 20-300 kw Generator Sets Market: Industrial Subject: Decision-Maker 3000 Controller Service Replacement Kit GM75376 Introduction
More informationVi-PEC V44 and V88 ECU
Vi-PEC V44 and V88 ECU Vi-PEC V44 and V88 ECU INTRODUCTION AIM has developed special applications for many of the most common ECUs: by special applications we mean user-friendly systems which allow to
More informationCAN bus switch panels mounted either on the dash or the steering wheel allow for vastly simplified wiring and reduced weight.
POWER MANAGEMENT UNIT PMU-16 PMU-16 Decades ago, the critical electronic components in a race car were the ignition coil and points. Race cars are now sophisticated machines equipped with advanced engine
More informationDIRECT LINK FLASH TUNER
DIRECT LINK FLASH TUNER Installation and User Manual Rev 3.0 This Guide is intended to answer basic Direct Link tuning questions and to act as a Quick Start Guide. It is not intended to be encyclopedic
More informationPLEASE CHECK YOUR LAMBDA TABLES AFTER UPGRADE!
Version 2.071, 24-04-2018 Gear calculation strategy rewritten. Now tolerance means percentage of ratio to the next gear ratio. Gear detection delay added Alternator control signal can be inverted Boost
More informationCENTURION Pro Diagnostic Motorcycle Scan Tool USER S GUIDE. Version 1.0
CENTURION Pro Diagnostic Motorcycle Scan Tool USER S GUIDE Version 1.0 CHAPTER 1: Preliminaries Introduction Centurion is a user-friendly tool that can diagnose engine and system problems and perform many
More information12/2013. Installation Guide & User Manual
12/2013 Installation Guide & User Manual ABOUT THIS MANUAL This manual has been written to help you understand all the functions and capabilities of the Yamaha Snowmobile Diagnostic Tool in order to gain
More informationElectronic Control Unit RC
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Electronic Control Unit RC RE 900/.0 /6 Replaces: 09.0 Series
More informationApex Turbo / Supercharger EFI Control Box Instructions
Apex Turbo / Supercharger EFI Control Box Instructions Before you begin, please read all the instructions below and check kit contents. Control Box Kit Contents: Quality check by: 1 Control Box with EFI
More informationWHIPPLE FLARE FLASH Instruction Manual
WHIPPLE FLARE FLASH Instruction Manual 2015 AND UP Ford MUSTANG/F150 WHIPPLE SUPERCHARGERS 3292 NORTH WEBER AVE FRESNO, CA 93722 TEL 559.442.1261 FAX 559.442.4153 A color PDF of this manual is available,
More informationBosch LSU4 Wide Band UEGO Controller
Bosch LSU4 Wide Band UEGO Controller Part Number 220-VM-AF1 CONFIGURATION Module Type: AF1 Serial Number: Output Units: Lambda A/F Gasoline A/F Methanol Channel Name: A/F Cyl 1 Channel Options: V_Net ID:
More informationSyvecs Limited. Syvecs S6 GP. SSuite Basic Manual. Ryan Griffiths
1 Syvecs Limited Syvecs S6 GP SSuite Basic Manual Ryan Griffiths 24-10-2011 This document intended for use by a technical audience and describes a number of procedures that are potentially hazardous. Installations
More informationInstruction and Operations Manual
1 GARTECH Enterprises, Inc. Rev 2 01-23-09 Instruction and Operations Manual Portable Test Cell Overview The primary purpose of the Portable Test Cell is to allow the user the ability to control the engine
More informationHaltech IQ3 Street Dash Guide
Haltech IQ3 Street Dash Guide Thank you for purchasing a Haltech IQ3 Street dash. This guide provides information on the installation and basic use of your dash. Your dash is preconfigured by Haltech with
More informationTemperature Programming Quick Reference Guide
Temperature Programming Quick Reference Guide Normal Mode Dial Brightness (press one at a time) Peak Mode Factory Default Reset (Hold for 5 seconds) High Alert Setting Mode Use LEFT or RIGHT buttons to
More informationThank you for your purchase.
Thank you for your purchase. Please read and understand the complete installation instructions before attempting to install this simple wire-in product. If not installed properly, LaunchMAX will not function
More informationInstallation Instructions for: Channel Thermocouple Amplifier
Installation Instructions for: 30-2204 4 Channel Thermocouple Amplifier The Advanced Engine Management (AEM) 4 channel thermocouple amplifier revolutionizes temperature measurements by providing laboratory
More informationDataPro Designer Quick Start Guide
DataPro Designer Quick Start Guide Introduction The DataPro Designer application provides the user with the ability to configure the ULTRA-LITE PRO range of Auto Meter data acquisition products. Using
More informationSection 4 - Automation Assembly
Table of Contents 1. Process Control Unit (PCU) 1.1 Introduction 1.2 PCU Power Cable 1.3 Display and input controls 1.4 Analog Inputs 1.5 FET Outputs 1.6 Thermocouple Connectors 1.7 Table of Thermocouples
More informationAEM ECU EMS V1.19+
AEM ECU EMS 30-1050 V1.19+ INDEX 1. Introduction Pag. 1 2. AEM EMS 30-1050 Pag. 2 3. RACE STUDIO2 SOFTWARE Pag. 6 INTRODUCTION AIM has developed special applications for many of the most common ECUs: by
More informationUSER MANUAL. V1.0.2, Rev A
1 USER MANUAL V1.0.2, Rev A 2 Contenido PRODUCT OVERVIEW... 5 1. INSTALLATION... 6 1.1 Selecting a Mounting Location... 6 2. MOUNTING THE ALBACOMBI UNIT... 7 2.1 DIN Rail Mounting... 7 2.2 Connecting to
More informationOrion Jr. Purchasing Guide Rev. 1.2
www.orionbms.com Orion Jr. Purchasing Guide Rev. 1.2 The Orion Jr. BMS is a low cost battery management system designed to manage low voltage lithium ion battery packs up to 48V nominal. The Orion Jr.
More informationMSK2. May 2012 Frankie Chan (IFAP ATV SMD SAE)
MSK2 SW framework May 2012 Frankie Chan (IFAP ATV SMD SAE) MSK2 SW Framework Provide small engine Hardware Platform to user to speed up the Engine Control Unit (ECU) development. The MSK2 SW framework
More informationInstallation Instructions
Installation Instructions USM 4 Sensor Input Vnet Module Racepak PN: 230-VM-USM Racepak Data Systems 30402 Esperanza Rancho Santa Margarita, CA 92688 949-709-5555 www.racepak.com Table of Contents PRODUCT
More informationSF-901 WINDYN DATA ACQUISITION SYSTEM
SF-901 WINDYN DATA ACQUISITION SYSTEM Update your SF-901 engine dyno with SuperFlow's advanced WinDyn 3.2 Data Acquisition System and take advantage of the latest software and data acquisition features
More informationCAN2-002 Install & Operating Instructions
CAN2-002 Install & Operating Instructions Part # L460260704 Tuesday, May 03, 2016 Revision: 1.1 (for use with software 1.3.3) CAN2-002 Install & Operating Instructions All rights reserved. No parts of
More informationCAN EGT-8 Amplifier. About:
CAN EGT-8 Amplifier About: 1. The amplifier supports up to eight K-Type temperature probes. 2. EGT temperatures are sent to engine management ECU via CAN Bus. 3. One volt input that can be used to send
More informationGEN4 PRO XTREME System Online Order Form Instructions
GEN4 PRO XTREME System Online Order Form Instructions GEN4 PRO XTREME systems can be ordered on a a la carte basis via a step by step online order form accessible from the BS3 website. There are two order
More informationDATA SHEET Compact Genset Controller, CGC 200
DATA SHEET Compact Genset Controller, CGC 200 Auto start and parameter monitoring Warnings and shutdown protections Includes 5 digital inputs, 5 relay outputs Configurable for other applications Licence-free
More informationSubject: 1999 Nissan Maxima A32, VQ30DE, USA OBD2 Compliant, Consult Data Registers
Subject: 1999 Nissan Maxima A32, VQ30DE, USA OBD2 Compliant, Consult Data Registers This vehicle has a J1962F 16 pin OBD2 connector as well as a 14 pin Consult connector for data communication ports to
More informationFlow Chart Programming Instructions for : Pressure 2 1/16 PROFESSIONAL RACING GAUGE START HERE PROGRAM MAIN MENU
Flow Chart Programming Instructions for : Pressure 2 1/16 PROFESSIONAL RACING GAUGE START HERE PROGRAM MAIN MENU (Press one button at a time) MAIN MENU PEAK HI ONE AT A TIME DOWN UP - + NORMAL LIGHTING
More informationService Technical Resources MUT-III. (Multi-Use Tester-III*) Quick Reference Guide
Service Technical Resources MUT-III (Multi-Use Tester-III*) Quick Reference Guide *Cart not included May, 2003 INTENDED USAGE OF MUT-III MUT-II role after MUT-III Launch MUT-III is an essential special
More informationECM C/F Engine Control Modules (Part Nos / )
Datasheet 36318 (Rev. A) Description MotoHawk Control Solutions ECM 0563 048 0704 C/F Engine Control Modules (Part Nos. 1751 6527 / 1751 6410) Presenting the ECM-0563-048-0704-C/F engine control modules
More informationWinTEC3 v3.0.0 Software User s Guide
WinTEC3 Engine Management Software WinTEC3 v3.0.0 Software User s Guide Contents Working With The WinTEC3 3.0.0 Engine Tuning Software... 4 System Requirements...4 TEC 3 Firmware WT300T3...4 WinTEC3 Software...4
More informationPowerView TM Model PV350 and PV380. Operations Manual Section 78
PowerView TM Model PV350 and PV380 Operations Manual 00-02-0879 2012-11-30 Section 78 In order to consistently bring you the highest quality, full featured products, we reserve the right to change our
More informationOBDII J1708/J1587 Simulator
1 Features: Support the total 8 protocols., Customer can choose any 2 protocols or any 5 protocols or all 8 protocols in different cost 1. ISO14230-4 (KWP2000) Fast Init 2. ISO14230-4 (KWP2000) Baud 5
More informationEQUIPMENT INSTALLATION MANUAL. for the GDC66 FUEL QUANTITY ADAPTER UNIT P/N Rev B
EQUIPMENT INSTALLATION MANUAL for the GDC66 FUEL QUANTITY ADAPTER UNIT P/N 1107-4000-01 Rev B DAC International 6702 McNeil Drive Austin, TX 78729 Copyright 2013, DAC International. All rights reserved.
More informationSeven Channel Remote Control
Seven Channel Remote Control Page 1 Versa7 Kit Contents The Versa7 is designed to remotely control up to seven devices, or functions. All seven functions can be controlled with the supplied four button
More informationMotion Controller. MXC Series Multi-Axis Motion Controller Compact Motion Controller with up to 6 Axes of Control
MXC Series Multi-Axis Motion Controller Compact Motion Controller with up to 6 Axes of Control Allied Motion s MXC motion controller is a very compact, multi-axis servo and/or step motor motion controller,
More informationInstallation Instructions Delta Boost Module Fits: Ford 1.6L, 2.0L, 2.3L & 2.7L EcoBoost engines Catalog # 18101
Watch our installation video on YouTube Installation Instructions Delta Boost Module Fits: 2012-2018 Ford 1.6L, 2.0L, 2.3L & 2.7L EcoBoost engines Catalog # 18101 Congratulations for being selective enough
More information15 channel programmable event timer, with RPM and Pressure inputs. *With Tachometer Feature
ELECTRIMOTION INC. 144 DALE FORD RD. DELAWARE, OH 43015 740.362.0251 15 channel programmable event timer, with RPM and Pressure inputs. *With Tachometer Feature Power Input connector: 2 pin plug (red-black)
More informationMounting DIGITAL DISPLAY
Mounting The Class digital display mounts in a. by. cutout. Overall area necessary for installation is. by.. Two 0.0 diameter holes are provided for mounting screws..0".0..0.900 Ø 0.0" () HOLES."." DIGITAL
More informationHow-To #7: Assemble an H-bridge Circuit Board
How-To #7: Assemble an H-bridge Circuit Board Making a DC motor turn is relatively easy: simply connect the motor's terminals to a power supply. But what if the motor is to be controlled by an Arduino,
More informationProcom PPC Software User s Manual
Procom PPC Software User s Manual Version 1.1 Procom Engineering Inc. 66 Maxwell, Irvine, CA 92618, USA Tel: 949-748 6338 Fax: 949-748 6339 Email: info@procomengineering.com www.procomengineering.com Contents
More informationEV Controls user Guide
EV Controls user Guide Copyright EV Controls Table of Contents Introduction... EV Controls System Features... General guidelines for installation... Inverter Electrical Pinout Sheet... Drive Inverter Connections...
More informationModel RS11 v2.0 CANbus Engine Data Converter NoLand Engineering, Inc. 1. Introduction
Model RS11 v2.0 CANbus Engine Data Converter NoLand Engineering, Inc. TABLE of CONTENTS 1. Introduction 2. General Description 3. Installation 4. Operation 5. Technical Specifications 6. Warranty Appendix
More informationPocketLOGGER for. For use exclusively with Rtek7 Stage 2 ECU Upgrade. Instruction Guide
PocketLOGGER for For use exclusively with Rtek7 Stage 2 ECU Upgrade Instruction Guide Rtek Firmware N332 Ver 1.1.2 N326 Ver 1.0.0 N351 Ver 1.0.0 PocketLOGGER Ver 2.0.0 digital tuning, inc. 23021 N. 15
More informationEQUIPMENT INSTALLATION MANUAL. for the GDC59 CONVERTER P/N
EQUIPMENT INSTALLATION MANUAL for the P/N 1095-4000-01 DAC International 6702 McNeil Drive Austin, TX 78729 Copyright 2009, DAC International. All rights reserved. Rev IR Page 1 of 17 RECORD OF REVISIONS
More informationITB THROTTLE WITH INTEGRATED STEPPER MOTOR INSTALLATION INSTRUCTION
ITB THROTTLE WITH INTEGRATED STEPPER MOTOR INSTALLATION INSTRUCTION MOTORTECH Gas Engine Accessories P/N 01.50.014 Rev. 12/2014 Copyright Copyright 2014 MOTORTECH GmbH. All rights reserved. Distribution
More informationWIRING FOR MXL PRO- 05
CONSTRUCTIVE DOCUMENTATION 0/0/005 WIRING Notes: general-purpose wiring for MXL PRO 05 CAR/BIKE installation Version.00 WIRING FOR MXL PRO- 05 MXL PRO 05 wiring (CAR/BIKES) Logger pinout: 7 pins Deutsch
More informationrcube2: Powertrain I/O Module
Page 1 rcube2: Powertrain I/O Module Overview rcube2 is a rapid prototyping ECU based on AUTOSAR that enables fast and efficient development of control systems from initial concept to production. The system
More informationInstallation and User Manual Centurion Diagnostic Software
Installation and User Manual Centurion Diagnostic Software This Guide is intended to answer Centurion U/UI/M/I/S/HD questions and to act as a Quick Start Guide. It is not intended to be encyclopedic on
More informationFlying Magnet Crank Trigger Kit General Wiring
Flying Magnet Crank Trigger Kit General Wiring ONLINE PRODUCT REGISTRATION: Register your MSD product online. Registering your product will help if there is ever a warranty issue with your product and
More informationEQUIPMENT INSTALLATION MANUAL. for the ARINC ALTITUDE ALERTER INTERFACE P/N
EQUIPMENT INSTALLATION MANUAL for the ARINC ALTITUDE ALERTER INTERFACE P/N 1085-4000-01 DAC International 6702 McNeil Drive Austin, TX 78729 Copyright 2008, DAC International. All rights reserved. IR.doc
More informationR4 Engine Programming Software
R4 Engine Programming Software Description: The R4 software is a Windows TM based software package that provides the user interface for a variety of Split Second engine management products. It controls
More informationLH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio
Forward and reversible plate Hatz Electric start 0 mm Hatz Electric start 0 mm Bio Hatz Electric start mm Bio Valid from serial number 0000 0000 0000 Contents Contents General information.....................................................................................................................................
More informationDGC-2000 DIGITAL GENSET CONTROLLER
DGC-2000 DIGITAL GENSET CONTROLLER Basler Electric s Digital Genset Controller (DGC-2000) offers an integrated alternative for genset control and monitoring. Control includes engine starting and shutdown
More informationManual# Installation Manual. 200E Series. DCU 210E/208E Engine Panel RP 210E/220E Remote Panel
Manual# 1006495 Installation Manual 200E Series DCU 210E/208E Engine Panel RP 210E/220E Remote Panel Installation Manual for the Marine Pro 200E Series ~~~ DCU 210E/208E Diesel Engine Control Unit RP 210E/220E
More informationWARNING!!!!!!!!! IMPORTANT INFORMATION: READ BEFORE INSTALLATION!
V_Net Relay Module Installation Instructions: Part Number: 230-VM-RELAY WARNING!!!!!!!!! IMPORTANT INFORMATION: READ BEFORE INSTALLATION! The relay outputs of the 230-VM-RELAY module may turn on when not
More informationOpen, Scalable Real-Time Solutions
Open, Scalable Real-Time Solutions Introducing TestDrive ECU-in-the-Loop Testing Q & A Alan Soltis Applications Engineer TestDrive Simulator An Overview Compact, robust chassis Pentium 4
More informationP/N AQ-1 DATA LOGGER
Instruction Manual P/N 30-2500 STOP! - READ THIS BEFORE INSTALL OR USE! WARNING: THIS INSTALLATION MAY REQUIRE WELDING OR INTEGRATION INTO A VEHICLE'S ELECTRICAL SYSTEM. DAMAGE TO SENSITIVE ELECTRONICS,
More informationInstruction Manual. P/N AQ1 Data Logger
Instruction Manual P/N 30-2500 AQ1 Data Logger! WARNING: This installation is not for the electronic novice or the PC illiterate! Use this system with EXTREME caution! If you are not well versed in electronics
More informationDigital Speed Controller User Manual
Diesel Engine for Generators Digital Speed Controller User Manual (DSC-1000) Ver_1.0 Doosan Infracore 페이지 1 / 36 Contents 1. Product Overview and General Specification 1.1 Product Information 1.2 Product
More informationM7100 Pressure Transducer
Pressure Transducer Performance standard to on and off highway engines and vehicle OEMs Rugged for heavy equipment and outdoor use Designed specifically for high volume applications Stainless Steel wetted
More information