RTU modules Create your infrastructures with peace of mind!

Transcription

1 RTU modules Create your infrastructures with peace of mind! Make the most of your energy SM

2 & Distributed Equipment) Compactness or modularity evolved to suit your applications Comprising compact or modular remote management modules, the Schneider Electric range precisely matches your equipment requirements. Multiplying functions these modules handle continuous measurement, recording, processing and archiving of your installation operating parameters Open to the web they simplify inter-site communication with a supervisor or server Ingenious they directly alert operators and manage operation/remote configuration 2

3 Remote management for drinking and wastewater networks... and infrastructures Applications models, preconfigured and easily installed Each item of equipment is supplied with the automated control system corresponding to work type. Simple and quick installation requires no programming and relies on local or remote intuitive configuration by editing of configurable fields in HTML pages. Pumping and recirculation station Pumping management as a function of levels of work controlled (reservoir, recirculation tank, etc.) Pump wear management by permutation strategy Reservoir Management of fill requests to the hydraulically linked pumping and recirculation station as a function of work levels Overpressure station Pumps start and stop as a function of water distribution network pressure (water hammer suppression, permutation cycle, etc.) Wastewater lift station Management of pumping, agitator, screen rake and pump wear by permutation strategy Continuous monitoring of your installations to optimize operating costs Thanks to W@de modules, be the master of your installations by controlling and managing work regulation, consumption monitoring, operator direct alert and maintenance planning. Counter remote reading For pulse counters (water, electricity, etc.) Consumption monitoring with reports (hourly, daily, monthly, minimum, maximum and load curve) Remote maintenance wind generator installation Permanent installation monitoring from medium-voltage network protection system information (Sepam type) Remote recommissioning actions following incidents Remote reading of various counters Programmable controller installation Transparent mode access to programmable controllers (diagnostics, program modification, etc.) Automatic alarms by and/or SMS in event of fault (programmable controller communication loss, alarming event appearance, etc.) Time-stamped logs (events and consumptions) Installation monitoring Basic operation without local automated control system (positions, measurements, counters, commands, archiving) with information reports to SCADA or by mail/sms: Heating/ventilation installations Refrigeration installations Site surveillance (intrusion) Thanks to Ethernet TCP/IP and web technologies, Transparent Ready products, equipment and services provide solutions for optimizing electrical distribution and automation and control performances. 3

4 Modules W315 and : modular solutions Integrating a web server and standard Ethernet communication protocols, W315 and modular solutions simplify integration of automated system architecture with factory and/or water network supervision systems. These products also offer transparent mode access to process programmable controllers and integrate a call back procedure. These high-performance and upgradeable solutions are suitable for simple or complex applications. Application software supplied Water Pumping station (more than four Recirculation station pumps, please Wastewater lift station consult us) Reservoir Others RTU (site surveillance) Programmable controller remote maintenance bridge Wind power remote maintenance 4

5 Sample RTU network Supervisor Internet SMS Radio/ GSM/ GPRS Other supervisor RTC/ LS/ BPL* RTC/ LS/ BPL* Modbus/ CEI870/ DNP3/ Radio/ RTC/ Com 1 GSM/ LS/ Com 2 GPRS BPL* Radio/ GSM/ GPRS Twido Pump protection RS485/232/ Acess control Regulators Programmable controllers Speed drives * BPL: Broadband Power Line. Communication by carrier current on low- or medium-voltage network (<30 kw) 5

6 Functions adapted to your needs Multiprotocol communication and protocol conversion Each remote management interface communicates locally using open Modbus protocol, and remotely with a supervisor using Modbus, IEC / IEC , DNP3 or other protocols, or with a Web server via any communication support (Radio, RTC/LS, GSM/GPRS, PSTN and Ethernet TCP/IP on fiber optic or cable). Data concentrator The W@de range assures data concentrator functions with Schneider Electric programmable controllers, variable speed drives and sensors via Ethernet, RS232 or RS485 link Data processing and archiving Event and alarm timestamped log archiving with history reports Analog input and counter sampling and archiving at configurable time intervals with history reports Central station Lift station Site surveillance Operator direct alert Three alarm levels for each data item, with call workload sequencing and postponed call management. Alarm notification by SMS or to supervisor W@de W315 W@de Web servers W3 : compatibility with existing systems W315 and modules integrate a Web server. W3 access via its IP address from a PC equipped with RTC modem and standard Internet navigator. Passwords ensure security. The W@de range is compatible with proprietary market supervisors: Vijeo Look, Vijeo Citect, PC Vue, Topkapi, etc. 6

7 Technical characteristics Function Mechanical Mounting Dimensions in. (mm) W315 Modular controller DIN rail Single width W = (40), H = (150), D = (136) Double width W = (80), H = (150), D = (136) Other format Protection index IP (others on request) IP20 IP20 Electrical Power supply VAC Integrated battery charger DC VDC 12 VDC Battery Integrated inputs/outputs State indicator Front face LEDs Digital inputs 6 to 16 Analog inputs ext. Analog outputs ext. Outputs 0 to 4 External extensions Digital inputs 8 or 16 (reference 8DT or 16DT) Digital outputs Digital mixed 8 (4DI + 4DO, reference 8DRT) ANA inputs 4 20 ma 2 (reference 2HT) ANA outputs 4 20 ma ANA mixed 4 20 ma 3 (2AI + 1AO, reference 3HT) Environment Temperature Operation -25 C to +70 C Storage -40 C to + 70 C -40 C to +70 C Communication IP services Web server/ethernet Internal modem RTC/LS GSM GPRS Radio External modem via RS232 port Dual port Second optional integrated modem Protocols Local port Modbus to PLCs Uni-Telway Remote port Modem only Modbus Modbus TCP/IP IEC IEC DNP3 Supervision Remote W502 compatibility SCADA compatibility Options and extensions Overvoltage protections: power supply, radio antenna, analog inputs, RS4852 port and telephony channel Power supply: 220 VAC/24 VDC and 12 V or 24 V solar 7

8 Talk to someone you can trust When we introduced the first programmable controller, we were responding to the needs of our customers for better, more effective machine control. More than 40 years later, we continue to listen and work with you to pioneer innovative new ways of delivering value, efficiency and performance. This commitment has earned us a reputation for dependability, innovation and reliability that is the defining characteristic of Schneider Electric team members from around the world. This includes product specialists, industry experts, distributors, partners and the countless other members of the Schneider Electric family. Whatever your need, Schneider Electric has the solution. Contact your local sales representative today to learn how Schneider Electric can improve operational performance and help your business to achieve a competitive advantage. To find genuine Schneider Electric brand PLCs, go to Schneider Electric USA, Inc. Automation and Control Center of Excellence 8001 Knightdale Blvd. Knightdale, NC Tel: Schneider Electric Canada, Inc. 19 Waterman Avenue Toronto, ON M4B 1Y2 Tel: This document has been printed on recycled paper 2010 Schneider Electric All Rights Reserved Document Number 8000BR0943 March 2010 tk