SYSTEM 25 SYSTEM 50 AS SYSTEM 63 SYSTEM 75 SYSTEM 100. Alsident System 50. Antistatic (AS) Product Information

Size: px
Start display at page:

Download "SYSTEM 25 SYSTEM 50 AS SYSTEM 63 SYSTEM 75 SYSTEM 100. Alsident System 50. Antistatic (AS) Product Information"

Transcription

1 Alsident System 50 Antistatic (AS) Product Information

2 .

3 System 50 Antistatic General Information Product Specification Product description System 50 Antistatic Alsident System Airflow between m 3 /h. System 50 Antistatic is particularly suitable in non-aggressive areas and where static electricity must be avoided e.g. electronics industries and technical schools. The standard Alsident System 50 Antistatic extraction arms are available in various types that are complementary to each other with reaches up to mm. The System 50 extraction arms are quickly mounted with standard brackets for table, wall or ceiling. In combination with the wide range of hood designs this makes it possible to choose an extraction arm adapted for each work situation. Alsident System 50 Antistatic extraction arms are self-sustaining with an internal bearing spring, TCP-chromated aluminium tubes and joints of Polypropylene with diameter 50 mm. All internal components are made of acid-proof stainless steel (AISI 316L). The TCP-chromated surface is corrosion protected and conductive. The TCP-chromation does not contain Chrom (VI). The construction constitutes a very user-friendly extraction arm that is easy to adjust to the source of the pollutant during the working process. Alsident System 50 Antistatic is approved for use in ESD-areas according to IEC and is therefore delivered with an earthing wire with a 1MΩ resistance. Further information is available in Mounting Instructions on the extraction arm or under Technical Information on our website. An extraction arm from Alsident System consists of three parts: An extraction arm, a hood and a mounting bracket. Each part must be ordered separately. In addition to the standard range, Alsident System offers special customized solutions. The Alsident technical department is always ready to help you find the best solution. Alsident offers short delivery time for both standard products and special solutions. GI 01

4 System 50 Antistatic General Information Product Specification Technical Specifications Recommended Airflow: Normal: 65 m 3 /h Air Temperature: Key to the Signatures SYSTEM NO. 50 VERSION Minimum: 45 m 3 /h Maximum: 85 m 3 /h -15 C +90 C Material: Pipes: Chromated Aluminium (TCP) Joint: O-Ring: Flange: Damper: Thumbscrew: CHAPTER AS Antistatic GI Conductive Polypropylene (PP) Conductive Polypropylene (PP) Conductive Polypropylene (PP) Polyethylene (PE) Polypropylene (PP) yellow Threaded Stay: Acid-proof stainless steel (AISI 316L) Spring: Acid-proof stainless steel (AISI 316L) The antistatic verion of System 50 is produced according to IEC The extraction arm includes an earthing wire with a 1MΩ resistance. Abbr.: TCP: Trivalent Chromium Passivation RoHS compatible surface treatment for aluminium PP: PE: Polypropylene Shatterproof and chemical resistant Polyethylene Local extraction for workplaces inclusive all material for mounting. All components RoHS-compatible according to the directive 2002/95/EF (RoHS). BM HM HMS General Information Table Mounted Wall Mounted Ceiling Mounted PAGE NO. 01 GI 02

5 System 50 Antistatic General Information Products Overview Wall mounted Wall mounted (WM), 2-joint Diam. L B C Weight Part No. [mm] [mm] [mm] [mm] approx. [kg] Wall mounted (WM), 3-joint Diam. L A B C Weight Part No. [mm] [mm] [mm] [mm] [mm] approx. [kg] GI 03

6 System 50 Antistatic General Information Products Overview Wall- and ceiling mounted Wall- and ceiling mounted (WM+CM), 2-joint Diam. L B C Weight Part No. [mm] [mm] [mm] [mm] approx. [kg] Wall- and ceiling mounted (WM+CM), 3-joint Diam. L A B C Weight Part No. [mm] [mm] [mm] [mm] [mm] approx. [kg] GI 04

7 System 50 Antistatic General Information Accessories Overview Hoods Extractor Tubes Suction Nozzle width 100 mm Part No.: Recommended for concentrated sources of pollution. Efficient as it gets close to the source without obstructing the work process. Often used in the electronics industry. Internal diffuser to increase efficiency. Material Hood: Chromated Aluminium (TCP) 1 Flange: Conductive Polypropylene (PP) 1 Connection tube: Chromated Aluminium (TCP) 1 1) See Page GI 02 Suction Nozzle width 200 mm Part No.: Recommended for concentrated sources of pollution. Efficient as it gets close to the source without obstructing the work process. Often used in the electronics industry. Internal diffuser to increase efficiency. Material Hood: Chromated Aluminium (TCP) 1 Flange: Conductive Polypropylene (PP) 1 Connection tube: Chromated Aluminium (TCP) 1 1) See Page GI 02 Extractor Tube Alu Part Nos.: and Recommended for small concentrated sources of pollution. Efficient as it gets close to the source without obstructing the work process. Carefully made funnel increases the extraction efficiency. Material Connection tube: Chromated Aluminium (TCP) 1 Length Part No. 210 mm mm ) See Page GI GI 05

8 System 50 Antistatic General Information Accessories Overview Hoods Metal Hood (Diam. 200 mm) Part No.: Recommended when extracting hot gases, fumes, light dust concentrations etc. Material Metal Hood: Chromated Aluminium (TCP) 1 Flange: Conductive Polypropylene (PP) Connection tube 2 : Chromated Aluminium (TCP) 1 1) See page GI 02 2) Separately enclosed at delivery Dome Hood (Diam. 385 mm) Part No.: Recommended for light fumes, gases and small open vessels. Increased stability due to reinforced rim of the hood. Increased efficiency at an angled position. Material Hood: Conductive Polypropylene (PP) Flange: Conductive Polypropylene (PP) Connection tube 2 : Chromated Aluminium (TCP) 1 1) See page GI 02 2) Separately enclosed at delivery Flat Screen Part No.: Recommended when extracting heavy gases and fumes. High efficiency when placed vertically on a surface e.g. a table. Practical rim for easy positioning of the hood. Gets close to the source without obstructing the work process. Material Hood: Conductive Polypropylene (PP) Flange: Conductive Polypropylene (PP) Connection tube 2 : Chromated Aluminium (TCP) 1 1) See page GI 02 2) Separately enclosed at delivery GI 06

9 System 50 Antistatic General Information Accessories Overview Brackets and Columns Wall Bracket Part No.: Used for System 50 wall mounted extraction arms. The wall bracket is made of black powder coated steel. Other colours available on request. Table Bracket Part No.: Used to mount System 50 Table Mounted Extraction Arms on table side which makes it removable for mobile installations. Made of black powder coated steel. Other colours available on request. U-profile Part No.: Used for reinforcement of the socket pipe when table mounting a System 50 extraction arm in table plate. Made of steel with a white powder coated surface and an extra flange. Other colours for the U-profile are available on request. Reducer Part Nos.: and Used to connect System 50 Extraction Arms to ducting. Made of conductive Polypropylene (PP). Available in two sizes. Reducing from/to AS 63/50 mm /50 mm GI 07

10 System 50 Antistatic General Information Accessories Overview Brackets and Columns Ceiling Columns Used for mounting the System 50 Ceiling Mounted Extraction Arms. The ceiling column is made of white or black powder coated steel. Available in two models with side connection or top connection to duct. Available in other lengths, colours and acid-proof stainless steel (AISI 316L) on request. Connection Diameter With side connection: 80 mm With top connection: max. 100 mm Top connection, Part No.:... Side connection, Part No.:... Length [mm] Weight app. [kg] White Black * * * * * Length [mm] Weight app. [kg] White Black 250** * * * * * *) Black on request. **) For socket pipe with hole. Please contact your Alsident dealer. Support Bracket for long ceiling column Part No.: For extra support of ceiling columns longer than 2 m. For support with wire to check or by fastening to ceiling rail system. The support bracket is made of steel with a white polyester powder-coating. Other colours available on request. GI 08

11 System 50 Antistatic General Information Technical Description Pressure Drop Chart Tested by Danish Technological Institute A System 50, Table mounted B System 50, Wall- and Ceiling mounted A B GI 09 9

12 System 50 Antistatic General Information Spare Parts List Joint with Damper Joint with Damper Pos. A Part No Pos. Part No. Description A Joint, 12 mm Joint, 5 mm O-Ring Teflon Washer Thumbscrew, 5 mm Threaded Stay Thumbscrew, 4 mm Wing for damper Damper Seegerring [Pieces applied] GI 010

13 System 50 Antistatic Table Mounting (TM) Working Area Table mounting with Extraction Tube Note: A: Model R: 445 mm B: Model R: 545 mm C: Model R: 645mm D: Model R: 765 mm E: Model R: 945 mm F: Model R: 1125 mm The working area of the arm is defined from the center of the opening of the accessory. The working area changes according to type of accessory and positioning. When chosing the arm we recommend that the stationary working position of the accessory is not placed in the highest or lowest part of the working area. (All measurements in mm) Accessories: Extractor Tube no TM GI 01

14 System 50 Antistatic Table Mounting (TM) Mounting Options Table Mounted Option Dimensions Directly on table. System 50 Extraction Arm mounted directly on a table with flange screwed to table plate. Accessories: No brackets used. (all measurements in mm) TM GI 02

15 System 50 Antistatic Table Mounting (TM) Mounting Options Table mounted option with Table Bracket Dimensions (all measurements in mm) With table bracket. System 50 Extraction Arm mounted on table side with a table bracket. Very functional option when impossible to mount directly on table or when a mobile installation is required. Accessories: Table Bracket, Part No. : TM GI 03

16 System 50 Antistatic Table Mounting (TM) Table Bracket Technical Description Part No.: Dimensions (all measurements in mm) Used to mount System 50 Table Mounted Arms on table side. Removable for mobile installations. Made of steel with a black powder-coating on all surfaces. Other colours available on request. TM GI 04

17 System 50 Antistatic Table Mounting (TM) Mounting Options Table Mounted Option with U-profile above table Dimensions (all measurements in mm) U-profile above table System 50 antistatic Extraction Arm mounted with U-profile above table. Accessories U-profile, Part No.: Mounting Instruction 1. Make a hole in the table with a max. diameter of 60 mm. Mount the socket pipe on the table with the screws enclosed. 2. Place the U-profile on the socket pipe and fasten it to the table. 3. Place the extra flange on the socket pipe and fasten it to the U-profile with the screws enclosed. 4. Place the extraction arm on the socket pipe. Make sure the internal spring goes into the socket pipe. 5. Follow the mounting instructions for the extraction arm. TM GI 05

18 System 50 Antistatic Table Mounting (TM) Mounting Options Table mounted option with U-profile below table Dimensions (all measurements in mm) U-profile below table System 50 Extraction Arm mounted with U-profile below table. Accessories U-profile, Part No.: Mounting Instruction 1. Make a hole in the table with a max. diameter of 60 mm. Mount the socket pipe on the U-profile with the screws enclosed. 2. Mount the U-profile with the socket pipe on the table. 3. Place the extra flange on the socket pipe and fasten it to the table with the screws enclosed. 4. Place the extraction arm on the socket pipe. Make sure the internal spring goes into the socket pipe. 5. Follow the mounting instructions for the extraction arm. TM GI 06

19 System 50 Antistatic Table Mounting (TM) U-profile Technical Description Part No.: Dimensions (all measurements in mm) Used for reinforcement of the socket pipe when table mounting a System 50 antistatic extraction arm in table plate. U-profile can be placed both above and below the table. Made of steel with a black powder coated surface and an extra flange. Other colours for the U-profile are available on request. TM GI 07

20 System 50 Antistatic Table Mounting (TM) Spare Parts (A) (B) (C) (D) (E) (F) Spare Parts List see next page 4 TM GI 08

21 System 50 Antistatic Table Mounting (TM) Spare Parts List Pos. Part No. Joint A B C D E F joint joint joint joint joint joint Pos. Spare part No. Description A B C D E F C-pipe TM Spring TM 3 mm (2-joint) Spring TM 3 mm Spring TM 4 mm O-Ring B-pipe B-pipe B-pipe Threaded Stay Thumbscrew Teflon Washer A-pipe A-pipe A-pipe Joint with damper* Joint, 5 mm *) Spare Parts List for joint with damper see General Information When ordering spare parts please quote: Part No. eg.: Description - B-pipe 375 Spare Part No Quantity - 1 pc. [pieces applied] If you wish to customize the arm with a spare part which is not a constituent part of the particular model, please contact your Alsident dealer. TM GI 09

22 System 50 Antistatic Table Mounting (TM) Mounting Instruction For mounting with U-profile see pages TM 05 + TM 06 GI BM TM 010

23 System 50 Antistatic Wall Mounted (WM) Working Area Wall mounting with Extractor Tube Note: A: Model R: 530 mm B: Model R: 630 mm The working area of the arm is defined from the center of the opening of the accessory. The working area changes according to type of accessory and positioning. When chosing the arm we recommend that the stationary working position of the accessory is not placed in the highest or lowest part of the working area. (All measurements in mm) C: Model R: 750 mm D: Model R: 910 mm E: Model R: 1080 mm F: Model R: 1380 mm Accessory: Extractor Tube no WM GI 01

24 System 50 Antistatic Wall Mounted (WM) Mounting Options Wall mounted extraction arm Dimensions (all measurements in mm) Wall Mounted System 50 Extraction Arm with the wall bracket. Accessories Wall Bracket, Part no.: WM GI 02

25 System 50 Antistatic Wall Mounted (WM) Wall Bracket Technical Description Part No.: Dimensions (all measurements in mm) Used with System 50 Table Mounted Extraction Arms. Made of black polyester powder coated steel. Other colours on request. WM GI 03

26 System 50 Antistatic Wall Mounted (WM) Spare Parts (A) (B) (C) (D) (E) (F) Spare Parts List see next page. WM GI 04

27 System 50 Antistatic Wall Mounted (WM) Spare Parts List Pos. Part No. Joint A B C D E F joint joint joint joint joint joint Pos. Spare part No. Description A B C D E F C-pipe WM Spring WM/CM 3 mm (2-joint) Spring WM/CM 3 mm Spring WM/CM 4.5 mm Spring WM/CM 5 mm O-Ring B-pipe B-pipe B-pipe Threaded Stay Thumbscrew Teflon Washer A-pipe A-pipe A-pipe A-pipe Joint with damper* *) Spare Parts List for joint with damper see General Information When ordering spare parts please quote: Part No. eg.: Description - B-pipe 275 Part No Quantity - 1 pc. [pieces applied] If you wish to customize the arm with a spare part which is not a constituent part of the particular model, please contact your Alsident dealer. WM GI 05

28 System 50 Antistatic Wall Mounted (WM) Mounting Instruction WM GI 06

29 System 50 Antistatic Ceiling Mounting (CM) Working Area Ceiling mounting with Extractor Tube Note: A: Model R: 530 mm B: Model R: 630 mm The working area of the arm is defined from the center of the opening of the accessory. The working area changes according to type of accessory and positioning. When chosing the arm we recommend that the stationary working position of the accessory is not placed in the highest or lowest part of the working area. (All measurements in mm) C: Model R: 750 mm D: Model R: 910 mm E: Model R: 1080 mm F: Model R: 1380 mm Accessory: Extractor Tube no CM GI 01

30 System 50 Antistatic Ceiling Mounting (CM) Mounting Options Ceiling Mounted Option Dimensions (all measurements in mm) System 50 Extraction Arm ceiling mounted with a ceiling column. Connection for ducting at the side or top. Accessories: Ceiling Column, Part No. depending on lengths. CM GI 02

31 System 50 Antistatic Ceiling Mounting (CM) Ceiling Column Technical Description Sokkelkasser Ceiling Columns Used for mounting the System 50 Ceiling Mounted Extraction Arms. The ceiling column is made of steel with a white or black powder coating. Available in two models with side connection or top connection to duct. For standard lengths see below. Other lengths, colours or acid proof stainless steel (AISI 316L) available on request. Connection diameter With side connection: 80 mm With top connection: max. 100 mm Top connection, Part No.: Length [mm] Weight app. [kg] White Black 250 2, , , , , * , * , * , * , * *) Black on request **) For socket pipe with hole. Please contact your Alsident dealer. Dimensions (all measurements in mm) Side connection, Part No.: Length [mm] Weight app. [kg] White Black 250** 2, , , , , * , * , * , * , * CM GI 03

32 System 50 Antistatic Ceiling Mounting (CM) Spare Parts List (A) (B) (C) (D) (E) (F) Spare Parts List see next page. CM GI 04

33 System 50 Antistatic Ceiling Mounting (CM) Spare Parts List Pos. Part No. Joint A B C D E F joint joint joint joint joint joint Pos. Spare part No. Description A B C D E F C-pipe WM Spring WM/CM 3 mm (2-joint) Spring WM/CM 3 mm Spring WM/CM 4.5 mm Spring WM/CM 5 mm O-Ring B-pipe B-pipe B-pipe Threaded Stay Thumbscrew Teflon Washer A-pipe A-pipe A-pipe A-pipe Joint with damper* *) Spare Parts List for joint with damper see General Information When ordering spare parts please quote: Part No. eg.: Description - B-pipe 275 Part No Quantity - 1 pc. [pieces applied] If you wish to customize the arm with a spare part which is not a constituent part of the particular model, please contact your Alsident dealer. CM GI 05

34 System 50 Antistatic Ceiling Mounting (CM) Mounting Instruction CM GI 06

LOCAL EXTRACTORS. The ideal extractor for industrial environments. Pure advantage

LOCAL EXTRACTORS. The ideal extractor for industrial environments. Pure advantage The ideal extractor for industrial environments. New technology in combination with new materials and a focus on design gives Movex PR many new and important advantages: - Unique ease of maneuverability.

More information

LOCAL EXTRACTORS Pure advantages. The ideal extractor for industrial environments.

LOCAL EXTRACTORS Pure advantages. The ideal extractor for industrial environments. N new materials and a focus on design gives Movex PR many new and important advantages: - Unique ease of maneuverability. H - Hood designed for maximum capture PR's design is based on Movex's basic principles:

More information

Slot diffusers, Round duct diffusers IMP Klima 04 Slot diffusers Round duct diffusers 176

Slot diffusers, Round duct diffusers IMP Klima 04 Slot diffusers Round duct diffusers 176 B 0 LD- F 9. φ D H H a 8.5 5 5 A E 7 LD- F 8 8.5 9. 5 5 A 7 E LD-/ LD-/ LD- O/ LD- O/ LD- O/ LD- O/.5.5.5.5 LD-/ LD-/ LD-/ LD-/ LD-/ LD-/ 7.5 7.5 07 LD- O/ LD- O/ LD- O/ LD- O/ 5.5 5.5 5.5 5.5 9.5 87.5

More information

Emergency Luminaire for Fluorescent Lamps Series EXLUX 6009

Emergency Luminaire for Fluorescent Lamps Series EXLUX 6009 > As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W and 36 W > Central locking > All-pole disconnection via N/C switch when opening light fitting or

More information

Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group

Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability

More information

IBIS. Duct diffuser with discs for supply air QUICK FACTS

IBIS. Duct diffuser with discs for supply air QUICK FACTS Duct diffuser with discs for supply air QUICK FACTS 0 flexible distribution pattern Suspended installation Easy installation Modular length: 00 mm Standard colour White RAL 900 -- alternative standard

More information

Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased durability easy and quick installation reasonable

More information

Accessories for control enclosures. BERNSTEIN attachment solutions. Double coupling head (console version with suspension system attachment)

Accessories for control enclosures. BERNSTEIN attachment solutions. Double coupling head (console version with suspension system attachment) 25 Accessories for control enclosures BERNSTEIN attachment Single coupling head (suspended console version) Double coupling head (console version with suspension system attachment) 322.5 231 232 140 The

More information

STR-3 STANDARD 3-PHASE 230 VAC TRANSFORMER CONTROLLER. Mounting and operating instructions

STR-3 STANDARD 3-PHASE 230 VAC TRANSFORMER CONTROLLER. Mounting and operating instructions STANDARD 3-PHASE 230 VAC TRANSFORMER CONTROLLER Mounting and operating instructions Table of contents SAFETY AND PRECAUTIONS 3 PRODUCT DESCRIPTION 4 ARTICLE CODES 4 INTENDED AREA OF USE 4 TECHNICAL DATA

More information

Capacitance level switches LS 210 LS 220

Capacitance level switches LS 210 LS 220 KROHNE 03/2001 7.02374.31.00 GR/PRINTO Capacitance level switches Compact switches for liquids, solids, slurry, foam and interface; outstanding performance for a low price Easy to install, no moving parts,

More information

ALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP

ALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP ALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP SIMBOX 63 /4 Introduction /5 Flush mounting distribution boards /6 Hollow-wall distribution boards /7 Surface mounting distribution boards /7 Hood-type

More information

Linear Luminaire with LED Series 6012/5

Linear Luminaire with LED Series 6012/5 > For use in Zones 1 & 2, 21 & 22 > Latest LED technology with a high luminous efficacy and a long service life > Extra flat version for low mounting depth > Powder-coated sheet-steel or brushed stainless

More information

OTHER FLAGPOLES 3 Other flagpoles FLAGMORE ACTION / Flagpole 6-2 meters Flagpole for temporary in ground installation. Delivered complete with cleat holes. Cleat holes on,5 m from the bottom or at any

More information

Gas-actuated thermometer Stainless steel version Model 73

Gas-actuated thermometer Stainless steel version Model 73 Temperature Gas-actuated thermometer Stainless steel version Model 73 WIKA data sheet TM 73.01 for further approvals see page 15 Applications General process instrumentation in the chemical and petrochemical

More information

IBISTM. Duct diffuser with discs for supply air

IBISTM. Duct diffuser with discs for supply air TM Duct diffuser with discs for supply air Quick facts 0 flexible distribution pattern High induction capacity Suspended installation Easy installation Modular length: 00 mm Available in alternative colours

More information

DRI. VARIZON Displacement unit with adjustable spread pattern

DRI. VARIZON Displacement unit with adjustable spread pattern VARIZON Displacement unit with adjustable spread pattern Quick facts Adjustable spread pattern and affected area Suitable for all types of rooms Cleanable Air volume measuring point Very simple to install

More information

AV mounting systems Q4-2009

AV mounting systems Q4-2009 AV mounting systems Q4-2009 Table of content 1 Table of content 1 SmartMetals projector mounts 2 Universal tube sets 3 Separate tube sets 4 Mirror kit & anti-theft set 5 Universal projector housings 6

More information

Linear Luminaire with LED Series 6412/5

Linear Luminaire with LED Series 6412/5 > For use in Zones 2, 21 & 22 > Latest LED technology with a high luminous efficacy and a long service life > Extra flat version for low mounting depth > Powder-coated sheet-steel or brushed stainless

More information

Linear Luminaire with LED Series EXLUX 6002/1 Version IIB+H2

Linear Luminaire with LED Series EXLUX 6002/1 Version IIB+H2 > For use in hazardous areas with gas group IIB+H 2 > Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or pole mounted light fitting > Central locking

More information

Limanda. Technical data

Limanda. Technical data Polyamide hand held enclosures for data acquisition, MCR and automation engineering 2 sizes: 270 x 248 x 64 mm to 311 x 281 x 72 mm Large fitting area For installations and command devices mobile and stationary

More information

13.1. Accessories for Workbenches

13.1. Accessories for Workbenches Workbenches Accessories Accessories for Workbenches Directory 13.2 Carrying Rollers and Ball Transfer Units for Worktops 13.3 Profi Overhead Frame 13.4 Carriers Rail for Profi Overhead Frame. 13.5 Profi

More information

GTH. Rectangular double deflection grille QUICK FACTS

GTH. Rectangular double deflection grille QUICK FACTS Rectangular double deflection grille QUICK FACTS For supply air Adjustable air deflectors Cleanable Installed using mounting frames FHB / FHA or commissioning box TRG Standard colour White RAL 900 -- alternative

More information

robust advanced technology Accessories » for mobile and stationary Ringler suction systems

robust advanced technology Accessories » for mobile and stationary Ringler suction systems www.ringler-gmbh.de robust advanced technology Accessories» for mobile and stationary Ringler suction systems Valid from 01.01.2013 Information Dear Customer, This catalog gives you an important selection

More information

Service poles for industrial applications

Service poles for industrial applications Service poles for industrial applications Ready to go. The ISS basic profile Our industry service poles bundle power, data and compressed air in a compact and robust manner. This means relocations, for

More information

R u b b e r d i s t r i b u t o r

R u b b e r d i s t r i b u t o r Rubber distributor The modular rubber distributor series We live in a fast-moving time. It is also frequently necessary to make modifications to power distribution systems. Power distributors used in industrial

More information

Argenta W A L L M O U N T I N G M E T A L C A B I N E T S

Argenta W A L L M O U N T I N G M E T A L C A B I N E T S Argenta W A L L M O U N T I N G M E T A L C A B I N E T S The ARGENTA Series is a group of metal enclosures used to house on the inside electrical or electronic switchgear, controlgear and equipment necessary

More information

Robust Clamps Shock-proof load range

Robust Clamps Shock-proof load range Robust Clamps Shock-proof load range Your application takes centre stage Robust Clamps Stainless steel Features: Extremly strong Vibration proof Impact and shock load... specific demands require specific

More information

TENSIONED DESCENDERPRO

TENSIONED DESCENDERPRO Motorized projection screen for ceiling recessed installations Product specifications: Ceiling recessed electrically operated projection screen 230 volt (50Hz) with a usage of no more than 3 Ampere (98.9

More information

SEQ SERIES ACCESS CONTROL BOLLARDS

SEQ SERIES ACCESS CONTROL BOLLARDS SEW600Y SERH4718 SERH3643 SERH3634 SERH3618 SEW300Y XSE300Y 4718 3643 3634 361 XD SEMP2013 XSE150Y DAHUA 1210 DAHUA 1220 DMSS SEQ1Y SEQ2Y SQTRY SQ1300Y SEQ SERIES ACCESS CONTROL BOLLARDS The SEQ Series

More information

Mechanical accessories

Mechanical accessories Bearing box Part no. 01209010, 01209029 Part no. 01209010 01209029 Shaft size Ø 15 mm Ø 10 mm Shaft load max Radial: 250 N, Axial: 150 N Speed max 4000 rpm Protection class IP 64 according to IEC 60529

More information

Single action door patch fittings

Single action door patch fittings Single action door patch fittings The flexible system for all installation situations. CONTENTS Technical details - 5 Materials and surface finishes Product information Patch fittings / none rebated frame

More information

THERMASGARD TM 65. Immersion screw-in duct temperature measuring transducer, calibratable, with multi-range switching and active output TECHNICAL DATA

THERMASGARD TM 65. Immersion screw-in duct temperature measuring transducer, calibratable, with multi-range switching and active output TECHNICAL DATA Patented quality product (Immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer THERMASGARD with eight switchable measuring ranges, continuous linear output, enclosure

More information

All prices in CHF, excl. taxes, ex works Solothurn, payment within 30 days net

All prices in CHF, excl. taxes, ex works Solothurn, payment within 30 days net Price list 2018 Standard program Magnetic holding devices Dial test indicator holder Selecting magnet Demagnetizer Holding and sticking magnets Rubber magnets Conditions: Delivery terms: All prices in

More information

Digital electropneumatic positioner

Digital electropneumatic positioner Digital electropneumatic positioner Type 879 can be combined with Compact metal housing Graphic display with backlight Easy start-up Comprehensive range of additional software functions Profibus DPV1 (optional)

More information

ALU 150/250. An advanced exhaust extraction system for vehicles in motion

ALU 150/250. An advanced exhaust extraction system for vehicles in motion An advanced exhaust extraction system for vehicles in motion ALU 150/250 is an advanced exhaust rail system for high frequency use. The ALU 150/ 250 offers a large number of features, such as manual return

More information

Ceiling diffusers - visible

Ceiling diffusers - visible Ceiling diffusers - visible About Lindab Comfort and Design Product overview / symbols Theory Ceiling diffusers Ceiling diffusers - visible Plenum boxes Wall diffusers Nozzles Ventiduct Grilles Displacement

More information

SERIES SS. Air Steel PUBLICATION GRILLES 16 JAN 2015

SERIES SS. Air Steel PUBLICATION GRILLES 16 JAN 2015 PUBLICATION GRILLES 16 JAN 2015 - Wide Selection of Designs and Styles - Flexible Size Range - Natural Stainless Steel Finish Introduction Gilberts Series SS Airsteel. With this new Series Gilberts provide

More information

SUPER LEDF10HP DATASHEET

SUPER LEDF10HP DATASHEET DATASHEET LED Fresnel Spotlight 330W - CRI>95 White light, either Tungsten or Daylight balanced OVERVIEW The Super LED F10HP is a high efficiency Fresnel lens spotlight using the innovative High Power

More information

Spares Catalogue. T: +44 (0) E: W: Engineering a better environment Filter Features 04-05

Spares Catalogue. T: +44 (0) E: W:   Engineering a better environment Filter Features 04-05 Engineering a better environment Spares Catalogue Filter Cartridges Filter Features 04-05 06-21 T: +44 (0) 1782 599454 E: sales@dustcheck.com W: www.dustcheck.com About Us Dustcheck is one of the UK s

More information

BELLOWS COVERS AND.

BELLOWS COVERS AND. BELLOWS AND COVERS www.joycedayton.com BELLOWS AND COVERS REDUCE EXPENSIVE MAINTENANCE AND DOWN TIME Protect your Equipment Investment When bellows and covers are fitted to machinery, expensive maintenance

More information

Ripac VME/VME64x Systems. Applications. Design Features

Ripac VME/VME64x Systems. Applications. Design Features Overview Of Systems For VMEbus Ripac VME/VME64x Slim-Box Ripac VME/VME64x Systems Ripac VME/VME64x Systems 1, 2, 3, 4U/2, 4, 6, 8 slot in AC input Order No. see pages 110-112 For backplanes see page 60

More information

Commercial Kitchen Hardware

Commercial Kitchen Hardware www.crh.com.au SOLUTIONS FOR TRADE Commercial Kitchen Hardware www.crh.com.au SOLUTIONS FOR TRADE CONTENTS Page 3 5 Page 6 Page 7 20 Page 21 22 Page 23 24 Page 25 26 Page 26 Page 27 Grease Filters Pots

More information

DKC. VARIZON Displacement unit with adjustable spread pattern

DKC. VARIZON Displacement unit with adjustable spread pattern VARIZON Displacement unit with adjustable spread pattern Quick facts Adjustable spread pattern and affected area Suitable for all types of room which require large airflows Simple installation Cleanable

More information

EcoTec SP tables and base cabinets

EcoTec SP tables and base cabinets Shapes and colours Tabletops and furniture surfaces Table superstructures, base cabinets and handles 30 mm panel with replaceable edge, Antistatic, light grey 30 mm panel with impact-resistant edge band

More information

Limanda. Technical data

Limanda. Technical data Polyamide hand held enclosures for data acquisition, MCR and automation engineering 2 sizes - 270 x 248 x 64 mm to 311 x 281 x 72 mm Large fitting area For installations and command devices mobile and

More information

09LD/GD. Air-Cooled Condensers/Air-Cooled Fluid Coolers. Nominal cooling capacity kw 09LD/GD 09GD

09LD/GD. Air-Cooled Condensers/Air-Cooled Fluid Coolers. Nominal cooling capacity kw 09LD/GD 09GD Air-Cooled Condensers/Air-Cooled Fluid Coolers 09LD/GD 09GD 09LD/GD Nominal cooling capacity 281-987 kw The 09LD air-cooled condensers are designed for refrigeration plants where a halogenated hydrocarbon,

More information

MIG-A TWIST MIG/MAG WELDING HOSES

MIG-A TWIST MIG/MAG WELDING HOSES MIG-A TWIST MIG/MAG WELDING HOSES MIG-A Twist - new patented welding hose with unprecedented ergonomics and flexibility MIG-A Twist - the new generation of welding hoses The design of MIG-A Twist fits

More information

SUPER LEDF6 DATASHEET

SUPER LEDF6 DATASHEET SUPER DATASHEET LED Fresnel Spotlight 120W - CRI>96 White light, either Tungsten or Daylight balanced OVERVIEW The Super LED F6 is a high efficiency Fresnel lens spotlight using the innovative High Power

More information

Full HD Speed Dome IP Camera

Full HD Speed Dome IP Camera Full HD Speed Dome IP Camera Installation Guide Indoor / Outdoor Ver. 1.6 Preface The information given in this manual was current when published. The company reserves the right to revise and improve its

More information

HOSE REELS. Hose reels. Page 202

HOSE REELS. Hose reels. Page 202 OSE REES Flexbimec manufactures a wide range of reels that guarantee a comfortable rewinding in all possible application fields and fluids such as: - ubricating oils and antifreeze - Grease - Compressed

More information

Pressure switches and thermostats, types KP and KPI

Pressure switches and thermostats, types KP and KPI Features Wide regulating range Small dimensions Space-saving - easy to install in panels Ultra-short bounce time. Limits wear to an absolute minimum and increases reliability. Electrical connection at

More information

Floormaster DVQA, quarter-cylindrical terminals

Floormaster DVQA, quarter-cylindrical terminals Floormaster DVQA are quarter-cylindrical supply air terminals for positioning on the floor in a corner. The terminals are designed for displacement air handling in accordance with the Floormaster system

More information

Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution

Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional

More information

Nozzle diffuser DYVZ / Supply air unit DYVB TECHNICAL DATA

Nozzle diffuser DYVZ / Supply air unit DYVB TECHNICAL DATA Nozzle diffuser DYVZ / Supply air unit DYVB TECHNICAL DATA Nozzle diffuser DYVZ / Supply air unit DYVB (DYVZ+ATVA) DYVZ DYVB (DYVZ + ATVA) The DYVB is a quiet wall mounted supply air unit that consists

More information

ROLLING COUNTER SHUTTERS

ROLLING COUNTER SHUTTERS 500 ROLLING COUNTER SHUTTERS EXCEPTIONAL SECURITY AND AESTHETICS WAYNE DALTON COMMERCIAL DOOR SYSTEMS The Wayne Dalton Rolling Counter Shutter system provides the perfect solution for smaller openings

More information

easy to install secure mounting Mounts for TV & Cable Management

easy to install secure mounting Mounts for TV & Cable Management easy to install secure mounting ounts for TV & Cable anagement simply. everything. you need. Content ounts for TV - FIX page 8 ounts for TV - otion page 10 ounts for TV - Fullmotion page 11 ounts for computer

More information

Ventilation grille. Dimensions

Ventilation grille. Dimensions Ventilation grille B0 Dimensions B+/A+ B-/A- Description B0 is a rectangular aluminium grille with fixed horizontal bars. B0 is used for both supply and exhaust air, and is supplied as standard with springs

More information

DESIGNED FOR THE FUTURE A NEW CONCEPT IN HATCH VENTILATION SYSTEMS

DESIGNED FOR THE FUTURE A NEW CONCEPT IN HATCH VENTILATION SYSTEMS DESIGNED FOR THE FUTURE A NEW CONCEPT IN HATCH VENTILATION SYSTEMS THINGS HAVE CHANGED, AND SO HAVE VENTILATION SYSTEMS. WALL SYSTEM HATCH SOLUTIONS ROOF SYSTEM A NEW CONCEPT IN HATCH VENTILATION SYSTEMS.

More information

Multitronic. Technical data

Multitronic. Technical data Multitronic EMC Aluminium enclosure system for MCR technology Integrated guide grooves for PCB s External mounting slots with spring nuts Technical data Material: DIN EN 573 EN AW-AlMgSi Ingress protection:

More information

Product data sheet accessories control and regulation Accessories AIRWIN

Product data sheet accessories control and regulation Accessories AIRWIN Product data sheet accessories control and regulation BO-CT1 Continuous controller Item no. 6100101 Control of humidification performance BO-CT1 Option board 2 binary inputs Item no. 002212 Setpoint switching,

More information

TILBURY STEEL SERVICE CENTRE

TILBURY STEEL SERVICE CENTRE TILBURY STEEL SERVICE CENTRE 159 Queen Street North Tilbury, ON, N0P 2L0 Voice: 519-682-0000 Toll-Free: 1-800-565-1077 Fax: 519-682-0004 Email: tsales@tilburysteel.com STOCK BOOK & REFERENCE GUIDE Tilbury

More information

North US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183

North US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183 North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8 Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06

More information

IP Enclosures Product Overview 2015

IP Enclosures Product Overview 2015 IP Enclosures Product Overview 2015 ENGINEERING COMPUTER SERVICES LTD Wall Mounted Electrical Enclosure Systems IP Enclosures is a premium brand of high quality wall mounted electrical enclosures and accessories.

More information

Continuous level measuring system NB 3000 Selection list

Continuous level measuring system NB 3000 Selection list Table of contents Page Overview 2 ------------------------------------------------------------------------------------------------------------------- Specifications 3 -------------------------------------------------------------------------------------------------------------------

More information

1 5 / 8" 7 /8" 2" 7 /8" 75. 3" 7 /8" 75 Polyurethane HI-TECH Delrin / /16 3/4

1 5 / 8 7 /8 2 7 /8 75. 3 7 /8 75 Polyurethane HI-TECH Delrin / /16 3/4 For use on wood furniture that can accept a 3 /8" diameter hole approximately 1 5 /8" deep. No.20 pressed steel adapter (Part #50011) with toothed base is supplied. size: 5 /16" diameter x 1 1 /2" long.

More information

VIREO Ceiling with ALX

VIREO Ceiling with ALX Square ceiling air diffuser with nozzles for supply air, with plenum box QUICK FACTS Flush design Suitable for VAV-applications Fast and easy installation Sealing ring, standard for spigot Energy efficient

More information

Float Switches with Permanent Magnet For Vertical Installation Model RSM

Float Switches with Permanent Magnet For Vertical Installation Model RSM Level Measurement Float Switches with Permanent Magnet For Vertical Installation Model RSM WIKA Data Sheet LM 30.01 Applications Level measurement for almost all liquid media Pump/level control and monitoring

More information

Counters, Process Displays, Timers, Tachometers. Product overview

Counters, Process Displays, Timers, Tachometers. Product overview Counters, Process Displays, Timers, Tachometers Product overview Totalizers mechanical Stroke counters Three designs, optional with 5-, 6- or 7-digit display. Manual reset Surface mount with mounting plate

More information

Supplementary instructions. Plug connector ISO for level sensors. Document ID: 30380

Supplementary instructions. Plug connector ISO for level sensors. Document ID: 30380 Supplementary instructions Plug connector ISO 4400 for level sensors Document ID: 30380 Contents Contents For your safety. Appropriate use... 3.2 General safety instructions... 3.3 Safety instructions

More information

Supplementary instructions. Plug connector ISO for continuously measuring sensors. Document ID: 30375

Supplementary instructions. Plug connector ISO for continuously measuring sensors. Document ID: 30375 Supplementary instructions Plug connector ISO 4400 for continuously measuring sensors Document ID: 30375 Contents Contents For your safety. Appropriate use... 3.2 Impermissible use... 3.3 General safety

More information

Area of use The Provita wall rail system is suitable for use

Area of use The Provita wall rail system is suitable for use WALL RAILS GENERAL WALL RAILS Area of use The Provita wall rail system is suitable for use in normal wards in intensive care wards in pre-operation rooms in the recovery room in doctors surgeries. Due

More information

TopConsole system TP. Combination options 1-part 2-part 3-part. System accessories Page 537 Monitors, keyboards From page 796 Climate control Page 389

TopConsole system TP. Combination options 1-part 2-part 3-part. System accessories Page 537 Monitors, keyboards From page 796 Climate control Page 389 opconsole system P System accessories Page 537 Monitors, keyboards From page 796 Climate control Page 389 Enclosure: Sheet steel 1.5 mm Door and console cover: Sheet steel, 2.0 mm, all-round foamed-in

More information

InForm Superstructures

InForm Superstructures Advantages InForm racks are fitted between the vertical profiles and thus ensure a generous amount of open working table surface. Devices are installed directly in the 3HU and 6HU racks, additional devices

More information

Ideal protection for your electrics: häwa cable ducts

Ideal protection for your electrics: häwa cable ducts Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in

More information

Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI

Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve in straightway form NPS 1-6 Pressure reducing valve Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Cast steel Fig. 701 Page

More information

CHEP ATEX. IECEx. Explosion proof Camera Housing. and. Certified

CHEP ATEX. IECEx. Explosion proof Camera Housing. and. Certified CHEP Explosion proof Camera Housing ATEX and IECEx Certified EXPLOSION PROOF HOUSING Different versions available to satisfy the different specs required by different hazardous environments. USER FRIENDLY

More information

For hoisting and mechanical handling, types XCR and XCK-MR For conveyor belt shift monitoring, type XCR-T

For hoisting and mechanical handling, types XCR and XCK-MR For conveyor belt shift monitoring, type XCR-T For hoisting and mechanical handling, types XCR and XCK-MR For conveyor belt shift monitoring, type XCR-T Presentation XCR With head for rotary movement operators, spring return to off position (1 contact

More information

workstation acessories ErgoChair ergonomic chair designed for the factory worker

workstation acessories ErgoChair ergonomic chair designed for the factory worker workstation acessories ErgoChair ergonomic chair ErgoChair ergonomic chair designed for the factory worker the backrest and seat foot ring adjustment ranges are designed to cover a large variety of production

More information

EXTENSA. Motorized projection screen for wall or ceiling installations. Product specifications: Aspect Ratios: Available dimensions

EXTENSA. Motorized projection screen for wall or ceiling installations. Product specifications: Aspect Ratios: Available dimensions Motorized projection screen for wall or ceiling installations Product specifications: Electrically operated projection screen 230 volt (50Hz) with a usage of no more than 4 Ampere (158.7 Watt). The motor

More information

V660 Series Analog Camera Dome Accessories Wall-Mount Arm V660-HDB243 Wall-mount adapter for indoor and outdoor camera domes Die-cast aluminum construction with polyester powder-coat finish Mounts to 4

More information

PMCL Series Mounts RACK/CEILING/WALL MOUNTS, UNIVERSAL CAMERA MOUNT, MONITORS

PMCL Series Mounts RACK/CEILING/WALL MOUNTS, UNIVERSAL CAMERA MOUNT, MONITORS PRODUCT SPECIFICATION control site PMCL Series Mounts RACK/CEILING/WALL MOUNTS, UNIVERSAL CAMERA MOUNT, MONITORS Product Features For Use with VESA -Compliant Monitors Rack Mounts for All 200/300/400 Series

More information

WEIGHING PLATFORMS. Trade, commerce and industry. Product Numbers 2816, 2817, 2818, 2822

WEIGHING PLATFORMS. Trade, commerce and industry. Product Numbers 2816, 2817, 2818, 2822 WEIGHING PLATFORMS Product Numbers 2816, 2817, 2818, 2822 Trade, coerce and industry > Weighing platforms for floor scales > Sturdy, flat design > With stainless steel, painted or hot-dip galvanised >

More information

NEW Self-contained. Photoelectric Sensor PR-M/F SERIES. New Standard! General-Purpose Metal Photoeye. New Standard for Photoelectric Sensors

NEW Self-contained. Photoelectric Sensor PR-M/F SERIES. New Standard! General-Purpose Metal Photoeye. New Standard for Photoelectric Sensors New Standard! General-Purpose Metal Photoeye NEW Self-contained Photoelectric Sensor PR-G SERIES New Standard for Photoelectric Sensors 01 02 03 PR-G SERIES PR-M/F SERIES LR-Z SERIES Self-contained Photoelectric

More information

060-Hardware. Clamps and Brackets Hose Clamps

060-Hardware. Clamps and Brackets Hose Clamps Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"

More information

Standard Bellows Metering Pumps

Standard Bellows Metering Pumps Standard Bellows Metering Pumps Bellows Metering Pumps operate on a positive displacement principle. Pumps are designed to displace both corrosive and noncorrosive fluids. Accurate to ± 0.5% from stroke

More information

Panel Enclosures. Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet

Panel Enclosures. Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet Panel Enclosures Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge steel (see page 153) All continuous

More information

BS EN Class H, BS 7430 UL467 (CR105) Tightening torque 15 Nm mm mm kg CR525

BS EN Class H, BS 7430 UL467 (CR105) Tightening torque 15 Nm mm mm kg CR525 Rod to tape clamp (type A) Nominal rod Max. conductor 1 2 12.7 mm 26 x 12 mm 0.1 kg CR10 8 16 mm 26 x 12 mm 0.1 kg CR10 4 20 mm 26 x 10 mm 0.1 kg CR10 8 16 mm 0 x 2 mm 0.16 kg CR108 4 20 mm 0 x 2 mm 0.16

More information

Supplementary instructions. Plug connector Harting HAN 7D. For point level sensors. Document ID: 34456

Supplementary instructions. Plug connector Harting HAN 7D. For point level sensors. Document ID: 34456 Supplementary instructions Plug connector Harting HAN 7D For point level sensors Document ID: 446 Contents Contents For your safety.... Appropriate use.... General safety instructions.... Safety instructions

More information

Specification. Radiamatic Detectors and Accessories

Specification. Radiamatic Detectors and Accessories 4/92 Page 1 of 8 Radiamatic Detectors and Accessories Specification Function The Radiamatic temperature detector generates an emf proportional to the temperature of the object sighted. It is used with

More information

Product catalogue. Aztec International S.A., ul. Bułgarska 63/65, Poznań, Poland, phone ,

Product catalogue. Aztec International S.A., ul. Bułgarska 63/65, Poznań, Poland, phone , Product catalogue Delivery Programme 2014 Status 02/2014 - Subject to change - Index Rail system... 4 Accessories mounting rails... 11 Rail connectors... 11 Cross connectors... 12 Module clamps... 13 Module

More information

IRONRIDGE PRODUCT CATALOG

IRONRIDGE PRODUCT CATALOG IRONRIDGE PRODUCT CATALOG Effective March 15, 2011 Product Catalog March 15, 2011 2 What s New: 1. New Products: a. End Caps for XRS and XRL Rails Page 6 b. End Clamps I, J, K, Page 7 and updated sizing

More information

Switches and Indicators 84

Switches and Indicators 84 Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories

More information

YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND

YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND - YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether

More information

Digital electropneumatic positioner

Digital electropneumatic positioner Digital electropneumatic positioner Type 879 can be combined with Compact and robust design Easy to start using tune function Dynamic positioning system with no air consumption in controlled state Profibus

More information

EXPLOSION PROOF HOUSING FOR EXTREMELY HARSH ENVIRONMENTS

EXPLOSION PROOF HOUSING FOR EXTREMELY HARSH ENVIRONMENTS CHEP INOX Stainless Steel Explosionproof Camera Housing ATEX and IECEx Certified CHEP INOX Stainless Steel AISI 316L Explosionproof Camera Housing EXPLOSION PROOF HOUSING Different versions available to

More information

Fixed Blade External Louvre

Fixed Blade External Louvre Fixed Blade External Louvre Models FBL and FBL 75 Model FBL Aluminium Construction Bird Wire Guard Standard Two Flange Widths 25mm or 44mm Slim 50mm Section Profile Intake or Exhaust Applications Single

More information

Probably the fastest enclosure in the world

Probably the fastest enclosure in the world 95 9 enclosure system Probably the fastest enclosure in the world Sample configuration tools required no no tools required Vitaro can be assembled within less than 60 seconds. 00:00 00:0 00:08 00: 00:5

More information

Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI

Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve ARI-PREDU - ANSI Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling

More information

Level Measurement Continuous level measurement - Ultrasonic transducers

Level Measurement Continuous level measurement - Ultrasonic transducers Overview transducers use ultrasonic technology to measure level in a wide range of liquids and solids. Benefits Integral temperature compensation Low ringing effect reduces blanking distance Optional foam

More information

Data sheet: Wilo-Stratos 40/1-8

Data sheet: Wilo-Stratos 40/1-8 Data sheet: Wilo-Stratos 4/1-8 Pump curves 1 2 v 3 4 DN4 m/s,5 1, 1,5 2, 2,5 DN5 H/m Wilo-Stratos 4/1-8 p/kpa Wilo-Stratos 5/1-8 48 1 /min - 1 V 1~23 V - DN 4 / DN 5 8 8 P 1/W n= const 6 383 1 /min - 8

More information