T2003 uninterruptible power supply. 10kVA to 50kVA

Transcription

1 T2003 uninterruptible power supply 10kVA to 50kVA

2 INNOVATION AND RELIABILITY Following in the footsteps of its legendary big brother the T2000, AEC s T2003 UPS is set to take the industry by storm. Where the market requires a compact, quieter and dare we say more stylish UPS then the T2003 is the one to choose. Introducing the T2003, a range of 3 Phase, True On Line Double Conversion Technology, Uninterruptible Power Supplies from 10kVA to 50kVA. The designers at AEC have delivered everything demanded of them: a new level of UPS reliability, style and functionality, together with high efficiency and low noise, all delivered at a very competitive price. AEC T2003 is set to be the choice of major enterprises around the world. Compact Quiet Stylish T2003 uninterruptible power supply MANUAL AND STATIC BY-PASS TO PROTECT A manual by-pass switch allows power to be transferred directly to the mains without disturbance to the load. The UPS can then be safely powered down for maintenance or repair, on completion of the work the UPS can be powered up and the load once again transferred back to the UPS with no interruption in service. If the power demand of your equipment exceeds the overload level of the UPS the static switch defaults to the mains ensuring continuous power in the event of system abuse or short term overload conditions. Don t leave your company data at risk, with the T2003 there s now no excuses. HEALTH AND SAFETY TO PROTECT The T2003 range conforms to all relevant electrical safety standards and is naturally CE certified, documentation can be provided on request. High reliability T2003 is designed specifically for computer room and office applications with easy to understand functionality using the on-board display panel and a choice of communication methods. The IT industry grows ever more demanding, expecting every generation of equipment to be smaller, faster, simpler, more efficient yet more powerful and easier to communicate with. These demands are consequently imposed on peripheral and support equipment, network devices, printers and of course UPS. AEC recognise these demands and are committed to providing innovative and reliable solutions not just to satisfy these requirements but to enhance them by providing cutting edge products. Our knowledge is your Power TIME TO PROTECT In addition to providing sufficient runtime to save files and shutdown operating systems, autonomies of up to 4 hours are available allowing you the option to complete your work without disturbance to your equipment, even during a power cut! T2003 not just another UPS A whole new breed on UPS.

3 T2003 key features FOUR CHOICES OF COMMUNICATION TO REMOTELY MANAGE AND MONITOR THE UPS. VERY QUIET IN OPERATION; BY USING HORIZONTALLY MOUNTED, DIRECT FORCE FANS, THE FANS ARE SMALLER, THEREFORE QUIETER. SIMPLE CONTROL, USING THE EASY TO USE DISPLAY PANEL, WITH ON- BOARD HELP MENU, JUST PRESS F1. VERY HIGH EFFICIENCY WHEN POWERING A LIGHT LOAD (A 20KVA HAS 89% EFFICIENCY AT 15% OUTPUT LOAD), SAVING ENERGY DURING TIMES OF LOWER DEMAND, EG OVERNIGHT. HIGHLY EFFICIENT; NOT ONLY DO THE SMALLER FANS USE LESS ENERGY, THEY ARE FITTED WITH A TWIN-SPEED REGULATOR LINKED TO INTERNAL TEMPERATURE SENSORS, FURTHER REDUCING ENERGY CONSUMPTION. SMALL FOOTPRINT (0.32M2), COMPACT TOWER, DESIGNED TO BE INSTALLED IN AN OFFICE OR COMPUTER ROOM, TAKING UP VERY LITTLE VALUABLE SPACE IN OFTEN CRAMPED HIGH RESOURCE AREAS. ALL SERVICING CAN BE COMPLETED ON-SITE. ITALIAN STYLING, AVAILABLE IN SEVERAL COLOUR MIX OPTIONS (INITIALLY BLACK + WHITE & BLACK + GREY, WITH BESPOKE CUSTOMER CHOSEN COLOUR MIXES TO BE INTRODUCED), ENABLING T2003 TO BLEND INTO ANY OFFICE DECORATION. NB: The UPS model featured is fitted with the optional LCD display.

4 CONTROL TO PROTECT All T2003 UPS come network-ready, with optional SNMP & HTTP adaptor. Use your preferred SNMP management application or the provided HTTP GUI through your web browser to monitor and control the UPS from anywhere on the network. As an alternative, specialised UPS management software is available for critical applications. The T2003 can be configured to send alerts over the network or out-of-band via modem to your pager, mobile phone or remote workstation. The T2003 is equipped with RS232 interface for serial communication and can also be supplied with volt-free contacts for SCADA applications. For your visits to the UPS itself, the T2003 is equipped with a simple, clear LCD screen displaying all necessary system information. T2003, with battery pack

5 UPS MANAGEMENT power at your fingertips UPS CONFIGURATIONS - AT A GLANCE LOCAL MONITORING Our specialised UPS management software gives you the power to monitor and control your UPS from remote locations. UPS MANAGEMENT SOFTWARE The UPS management software is installed on a server or workstation connected to each UPS via the serial port. Power failure, power restored, battery failure or eight events will be detected and the user informed. A shutdown will be initiated when the batteries are exhausted or a technical problem occurs with the UPS. The UPS management software disconnects network connections, logs out users and closes open applications (subject to app/os support) before shutting down the operating system itself. After installation of software, these computers can all be safely shut down SIMPLE NETWORK MANAGMENT PROTOCOL (SNMP) Features: Extensive log files Scheduled battery and inverter testing Scheduled system shutdown/restart User-customisable commands and messages Multiple UPS control from a single computer SNMP has its own IP address and connects directly onto the network. Remote Console Command module for remote multiple server shutdown Internal SNMP sub-agent for integration into existing NMS (e.g. HP OpenView, CA Unicenter) SIMPLE NETWORK MANAGEMENT PROTOCOL (SNMP) The T2003 SNMP external agent can be located up to 5 metres away from the UPS. Initial configuration is carried out by serial comms using any suitable terminal application (e.g. Hyperterminal for Windows). The embedded HTTP server presents an HTML interface to the network, which can be accessed from any web browser. All system parameters can be configured from here, including scheduled shutdown. A sophisticated Java applet provides full monitoring in real time, along with comprehensive event and history logs.

6 T2003 SPECIFICATIONS Power Rating (kva) Input Nominal Input Voltage 380/400/415 Voltage range 380VAC -15%/+23% 400VAC -20%/+20% 415VAC -25%/+15% Nominal Frequency 50 / 60Hz Frequency Range +/- 10% Max Current (No Batteries) Max Current with batteries Input Power 400V 0.86 Rectifier Soft Start Time 15 Seconds Rectifier Nominal Output Voltage 384VDC Range of Operation (VDC) 320min / 480max Max battery charging current Inverter Nominal Input Voltage 384 VDC Range of Operation (VDC) 320min / 480max Nominal Output Voltage 380/400/415 Nominal Output 0.8 p.f Output Frequency 50 / 60Hz Selectable Output Waveform Sinusoidal THD with Linear Load <1% THD with non Linear 70% <4% Load crest factor (Ipk/Irms) 3 : 1 System syncronisation margin Hz Frequency Stability from internal clock 50Hz % Applicable load 0-110% Maximum applicable load 125% Overload 150% x 45 seconds Power Rating (kva) Static Switch Nominal Input Voltage 380/400/415 Frequency range accepted 30-80Hz Overload 100% for 30 mins; 500% for 10 mins; 1000% for one cycle Transfer time (Invr/Res) when synconised 0ms Transfer time (Invr/Res) not synconised 20ms Transfer time (Res/Invr) not syncronised Not Allowed System AC/AC Efficiency Losses with no load (Watts) % 400V 10-15kVA 89.6% 20-30kVA 89.8% 40-50kVA 90.1% 50% 400V 10-15kVA 91.7% 20-30kVA 91.8% 40-50kVA 92.1% 75% 400V 10-15kVA 91.7% 20-30kVA 91.9% 40-50kVA 92.3% 100% 400V 10-15kVA 91.4% 20-30kVA 92% 40-50kVA 92.1% Operating Temperature -5 to 40 C Relative Humidity 90% non condensing Altitude derating power >1000 metres, 5% every 500 metres MTBF 110kh Mechanical Data Dimensions (UPS) WxDxH 400x800x1000 Weight UPS (KG) IP Rating IP21 Cable Entry Rear of UPS at Base Cooling Front to rear Colour White - RAL Grids RAL Black - RAL 7015 AEC SpA Via per Cinisello ang. Via Vesuvio 1 I Nova Milanese MI ITALY Tel: Fax: export@aeceuro.com Web: