TM200C24R controller M IO relay

Transcription

1 Product datasheet Characteristics TM200C24R controller M IO relay Main Range of product Product or component type [Us] rated supply voltage Discrete I/O number 24 Discrete input number Discrete output number Discrete input voltage Discrete input voltage type Discrete input current 19 Jan, 2019 Modicon Easy M200 Logic controller V AC 4 fast input (I2...I5) 4 high speed input (I0, I1, I6, I7) 6 regular input (I8...I13) 10 relay 24 V DC 7 ma for input Discrete input logic Sink or source (positive/negative) type 1 conforming to EN/IEC Discrete output voltage Discrete output current Discrete output type Power consumption in VA Complementary Number of I/O expansion module Supply voltage limits Network frequency Inrush current Voltage state 1 guaranteed Voltage state 0 guaranteed Input impedance Response time 220 V AC 24 V DC 2 A Relay normally open VA at V AC with max I/O <= 4 with <= 128 discrete output(s) for transistor output <= 4 with <= 74 discrete output(s) for relay output V 50/60 Hz <= 50 A >= 15 V for input <= 5 V for input 3.3 kohm for discrete input 5 µs during turn-off operation for high speed input with I0, I1, I6, I7 terminal(s) 5 µs during turn-on operation for high speed input with I0, I1, I6, I7 terminal(s) 100 µs during turn-off operation for fast input with I2...I5 terminal(s) 10 ms during turn-off operation for relay output with Q0...Q9 terminal(s) 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications

2 Configurable filtering time Output voltage limits Current per output common Electrical durability Switching frequency Mechanical durability Minimum load Memory capacity Data storage equipment Battery type Backup time Execution time for 1 KInstruction Execution time per instruction Exct time for event task 10 ms during turn-on operation for relay output with Q0...Q9 terminal(s) 100 µs during turn-off operation for regular input with I8...I13 terminal(s) 35 µs during turn-on operation for regular input with I8...I13 terminal(s) 35 µs during turn-on operation for fast input with I2...I5 terminal(s) 0 ms during input 3 ms during input 12 ms during input 250 V AC 30 V DC 4 A at COM 0 terminal 4 A at COM 1 terminal 4 A at COM 2 terminal Resistive DC-12, 24 V / 48 W : cycles Resistive AC-12, 240 V / 480 VA : cycles 0.1 Hz with maximum load >= cycles for relay output 10 ma at 5 V DC for relay output 512 byte internal flash memory for backup of programs 32 GB micro SD card (optional) BR2032 Li-CFx (Lithium-Carbon Monofluoride), battery life: 5 yr 3 years at 25 C by interruption of power supply 0.3 ms for event and periodic task 0.2 µs Boolean 60 µs response time Clock drift <= 90 s/month at 25 C Regulation loop Control signal type Counting input number Adjustable PID regulator up to 14 simultaneous loops Single phase signal at 100 khz for fast input (HSC mode) Pulse/Direction signal at 100 khz for fast input (HSC mode) Quadrature (x1, x2, x4) signal at 100 khz for fast input (HSC mode) CW/CCW signal at 100 khz for fast input (HSC mode) 4 fast input (HSC mode) (counting frequency: 100 khz) 32 bits Integrated connection type USB port mini B USB 2.0 Non isolated serial link "serial 1" terminal block and interface RS485 Non isolated serial link "serial 2" terminal block and interface RS232/RS485 Isolated serial link "serial 2" terminal block and interface RS485 Transmission rate Communication port protocol Local signalling Electrical connection Cable distance between devices Insulation kbit/s (115.2 kbit/s by default) for bus length of 15 m - communication protocol: RS kbit/s (115.2 kbit/s by default) for bus length of 3 m - communication protocol: RS Mbit/s - communication protocol: USB USB port : USB protocol - SoMachine-Network Non isolated serial link : Modbus protocol with master/slave method - RTU/ASCII or SoMachine- Network 1 LED green for SD card access (SD) 1 LED red for BAT 1 LED green for SL1 1 LED per channel green for I/O state 1 LED red for module error (ERR) 1 LED green for PWR 1 LED green for RUN Mini B USB 2.0 connector for a programming terminal Removable screw terminal block for inputs Removable screw terminal block for outputs Removable screw terminal block, 4 terminal(s) for connecting the serial link1 Removable screw terminal block, 3 terminal(s) for connecting the V AC power supply Shielded cable: 10 m for fast input Unshielded cable: 50 m for input Unshielded cable: 150 m for output Shielded cable: 10 m for high speed input 500 V AC between fast input and internal logic Non-insulated between inputs 500 V AC between input and internal logic 1780 V AC between output and internal logic 1780 V AC between output groups 1780 V AC between supply and internal logic 500 V AC between input groups 2

3 Sensor power supply Marking 24 V DC at 250 ma supplied by the controller CE Mounting support Rail top hat type TH35-15 conforming to IEC Plate or panel with fixing kit top hat type TH conforming to IEC Height Depth Width Product weight 90 mm 70 mm 130 mm kg Environment IP degree of protection Product certifications IP20 with protective cover in place CSA culus IACS E10 RCM Standards EN/IEC EN/IEC Electromagnetic compatibility Shock resistance Immunity to microbreaks Vibration resistance Relative humidity Ambient air temperature for operation Electrostatic discharge immunity test (test level: 8 kv - air discharge) conforming to EN/IEC Electrostatic discharge immunity test (test level: 6 kv - contact discharge) conforming to EN/IEC Susceptibility to electromagnetic fields (test level: 10 V/m - 80 MHz...3 GHz) conforming to EN/IEC Conducted emission (test level: 79 dbμv/m QP/66 dbμv/m AV - power lines (AC)) conforming to EN/ IEC Conducted emission (test level: 73 dbμv/m QP/60 dbμv/m AV - power lines (AC)) conforming to EN/ IEC Radiated emission (test level: 40 dbμv/m QP, class A - 10 m) conforming to EN/IEC Radiated emission (test level: 47 dbμv/m QP, class A - 10 m) conforming to EN/IEC Magnetic field at power frequency (test level: 30 A/m conforming to EN/IEC Electrical fast transient/burst immunity test (test level: 2 kv - power lines) conforming to EN/IEC Electrical fast transient/burst immunity test (test level: 2 kv - relay output) conforming to EN/IEC Electrical fast transient/burst immunity test (test level: 1 kv - I/O) conforming to EN/IEC Electrical fast transient/burst immunity test (test level: 1 kv - serial link) conforming to EN/IEC /50 µs shock waves immunity test (test level: 1 kv - power lines (DC)) conforming to EN/IEC /50 µs shock waves immunity test (test level: 2 kv - power lines (AC)) conforming to EN/IEC /50 µs shock waves immunity test (test level: 2 kv - relay output) conforming to EN/IEC /50 µs shock waves immunity test (test level: 1 kv - I/O) conforming to EN/IEC /50 µs shock waves immunity test (test level: 1 kv - shielded cable) conforming to EN/IEC /50 µs shock waves immunity test (test level: 0.5 kv - power lines (DC)) conforming to EN/IEC /50 µs shock waves immunity test (test level: 1 kv - power lines (AC)) conforming to EN/IEC /50 µs shock waves immunity test (test level: 1 kv - relay output) conforming to EN/IEC Conducted RF disturbances (test level: 10 V MHz) conforming to EN/IEC gn (test wave duration:11 ms) 30 gn (test wave duration:6 ms) 10 ms Ambient air temperature for storage C Pollution degree <= 2 Operating altitude Storage altitude 3.5 mm (vibration frequency: Hz) on symmetrical rail 1 gn (vibration frequency: Hz) on symmetrical rail 3.5 mm (vibration frequency: Hz) on panel mounting 2 gn (vibration frequency: Hz) on panel mounting % without condensation in operation % without condensation in storage C for horizontal installation m m 3

4 Offer Sustainability Sustainable offer status RoHS (date code: YYWW) REACh Product environmental profile Product end of life instructions Green Premium product Compliant - since Schneider Electric declaration of conformity Schneider Electric declaration of conformity Reference not containing SVHC above the threshold Reference not containing SVHC above the threshold Available Product Environmental Profile Available End of Life Information 4

5 Product datasheet Dimensions Drawings TM200C24R Dimensions Drawings Dimensions 5

6 Product datasheet Mounting and Clearance TM200C24R Mounting and Clearance Mounting on a Rail Direct Mounting on a Panel Surface Mounting Position 6

7 Clearance 7

8 TMCR2 Installation TMCR2 De-Installation 8

9 9

10 Product datasheet Connections and Schema TM200C24R Wiring Diagram / Connections Schema AC Power Supply (*) Type T fuse Digital Inputs Positive Logic (Sink) (*) Type T fuse (**) Fast inputs (1) The COM0 and COM1 terminals are not connected internally. Digital Inputs Negative Logic (Source) (*) Type T fuse (**) Fast inputs (1) The COM0 and COM1 terminals are not connected internally. 10

11 Relay Outputs - Negative Logic (Sink) (*) Type T fuse (1) The COM0 and COM1 terminals are not connected internally. (2) A free wheeling diode or an RC snubber Relay Outputs - Positive Logic (Source) (*) Type T fuse (1) The COM0 and COM1 terminals are not connected internally. (2) A free wheeling diode or an RC snubber USB Mini-B Connection SL1 Connection D1 : D0 : Shield : COM : D1 (A+) D0 (B-) Shield O V Com 11