Ordering Guide of the Single-Mode Connectorized Fiber Cables (Pigtails & Jumpers) and Single-Mode Connector Mating Adapters

Transcription

1 Page 1 of 9 Ordering Guide of the Single-Mode Connectorized Fiber Cables (Pigtails & Jumpers) and Single-Mode Connector Mating Adapters This document provides assistance with the selection of single-mode connectorized single fiber cables (pigtails and jumpers) and adapters for use in cable termination applications. It includes the following sections: 1 Product description 2 2 Ordering information Single-mode connector adapters 4 3 Product guide Selection: tuned, untuned or centered connector Information about connectors & connector-boots Color coding of boots & connectors Length of boot & connector-assembly Selection of the single-mode single fiber cable type Pictures of available single-mode connector types 7

2 Page 2 of 9 1 Product description Connectorized single fiber cables (pigtails and jumpers) are used in almost all cable termination products. Single-mode fiber-optic cable assemblies are designed for use in Telecommunications, CATV, Data-communications and Wide Area Network applications. Multimode fiber-optic cable assemblies, on the other hand, are designed for use in local area network (LAN) applications, and are not covered in this document Pigtails are single fiber cables pre-assembled with a connector at one end. They are typically used to terminate primary coated fiber to optical equipment. P&J011.JPG Jumpers are single fiber cables pre-assembled with a connector at both ends. They are typically used to cross-connect patch panel to patch panel and to inter-connect patch panels to optical equipment. P&J012.JPG Adapters enable the interconnection between two similar (or different style) fiber optic connectors. The adapters use a ceramic or metal sleeve (not standard) to align the connectors and achieve a low insertion loss connection. P&J4.JPG For special applications (such as in FIST-MK1-boxes) pigtails are available which are factory stripped-up to the secondary coating and have a pre-installed length of FOPT transportation tube. The FOPT transportation tube can be cut to length to suit the precise distance from the patch panel or optical equipment to the corresponding tray. For all connectors used on the pigtails and jumpers the matching connector mating adapters with retainer are available and can be ordered separately (OC-ADK, OC-ADP). The use of a full zirconia connector ferrule is recommended in outside plant conditions. All ferrules are full zirconia except the E2000 centered versions. For detailed technical information, please refer to RUD5291.

3 Page 3 of 9 2 Ordering information Different pigtail and jumper configurations are available to suit specific requirements. Refer to Section 3 for more detailed information. All red selections are considered preferred and stockprofiles will be maintained for these types. Connectorized simplex cable type OCX-X-XX-XX X XXXX-XX P J Pigtail Jumper Ferrule centering method T U C Tuned Untuned Centered Connector type at end 1 Min. Return Loss 45 db (PC) 50 db (UPC) 60 db (APC 8 ) 60 db (APC 9 ) Cable length SC, FC, LC, DIN, MU, E2000 (E9) ST E2000 (E8) Connector type SC FC E2000 LC DIN ST MU S0 F0 D0 T0 S1 F1 L1 U1 S2 F2 E8, E9 L2 S3 01, 02 10, 11, always use 2 digits for cable length Cable length unit M D Meter Decimeter (only for jumpers) Cable type Single mode fiber (9/125 µ) according to ITU-T G652 Outer jacket material (including reinforced aramide yarn) LSZH PVC secondary coating semi-tight tight. 3 mm ATAB 2.4 mm ASCA ATCB 1.7 (±0.1) mm (only for LC and MU) ASIA ATIB Without outer jacket secondary coating semi-tight 900 µm naked ASEN 900 µm m FOPT tubing ASEE Connector type at end 2 Same options as for connector type at end 1. Select XX in case of a pigtail. Notes In case of a hybrid jumper with connectors with different ferrule centering method, the ferrule centering method in the name string shall be: C preferred over T preferred over U. In case of hybrid jumpers, sort connector type alphanumerical (f.e. : OCJ-T-F1-05MASCA-S1 and not OCJ-T-S1-05MASCA-F1) (f.e : OCJ-T-F1-05MASCA-F2 and not OCJ-T-F2-05MASCA-F1)

4 Page 4 of 9 Example: OCJ-T-F0-09MASCA-S1 Jumper Tuned: both sides if possible FC/PC connector (0.3 db, white boot) 9 meter Single-mode 9/125 µm, semi-tight secondary coating, 2.4 mm dia LSZH outer jacket SC/UPC 50 db (blue boot) 2.1 Single-mode connector adapters Different connector adapters are available to suit specific requirements and can be delivered with retainers for integration in racks and shelves. Ordering description Qty/Pck Product description OC-ADK-S1-S1-NNCS 1 pc Connector mating adapter for SC/(U)PC OC-ADK-S2-S2-NNCS 1 pc Connector mating adapter for SC/APC OC-ADK-F1-F1-NNCS 1 pc Connector mating adapter for FC/(U)PC OC-ADK-F2-F2-NNCS 1 pc Connector mating adapter for FC/APC OC-ADK-E9-E9-NNCS 1 pc Connector mating adapter for E2000 APC (tuned connector) OC-ADK-E8-E8-NNCS 1 pc Connector mating adapter for E2000 APC (centered connector) OC-ADK-L1-L1-NNCD 1 pc Connector mating adapter for LC/(U)PC duplex OC-ADK-L2-L2-NNCD 1 pc Connector mating adapter for LC/APC duplex OC-ADK-D1-D1-NNCS 1 pc Connector mating adapter for DIN/(U)PC OC-ADK-T1-T1-NNCS 1 pc Connector mating adapter for ST/(U)PC OC-ADK-U1-U1-NNCD 1 pc Connector mating adapter for MU/(U)PC duplex Order preferably by multiples of 4 pieces. Notes Change OC-ADK into OC-ADP when no retainer is required. Add suffix -24 to the description for bulk packaging of 24 pieces. FC/APC adapters are standard offered with a narrow Seikoh-Giken slot (2.05 +/ mm) Adapters are standard with a zirconia (ceramic) sleeve

5 Page 5 of 9 3 Product guide 3.1 Selection: tuned, untuned or centered connector Tuned connector Core (after tuning) R Allowed position Ferrule Tuned The center of the cores are all distributed in a defined area on ONE SIDE of the center of the ferrule. Insertion loss = typ. < 0.2 db (random mated) = max. 0.5 db (random mated) Core (before tuning) r Typical: r = 0.4 µm R = 1.2 µm Untuned connector Ferrule Untuned The center of the cores are randomly distributed AROUND the center of the ferrule. Allowed position R Core of fiber Insertion loss = typ. < 0.3 db (random mated) = max. 1.0 db (random mated) Typical: R = 1.2 µm Centered connector Ferrule Centered The fiber is positioned in the center by making controlled notches in the soft metal layer on the endface of the ferrule. Allowed position R Core of fiber Insertion loss = typ. < 0.2 db (random mated) = max. 0.5 db (random mated) Typical: R = 0.4 µm

6 Page 6 of Information about connectors & connector-boots Color coding of boots & connectors Connector type Return loss Name string reference Boot color Connector SC 45 db (PC) S0 white blue 50 db (UPC) S1 blue blue 60 db (APC 8 ) S2 green green 60 db (APC 9 ) S3 red green FC 45 db (PC) F0 white - 50 db (UPC) F1 blue - 60 db (APC 8 ) F2 green - LC 50 db (UPC) L1 blue blue 60 db (APC 8 ) L2 green green E db (APC) E9 green green 60 db (APC) E8 green green DIN 45 db (PC) D0 white - MU 50 db (UPC) U1 blue blue ST 45 db (PC) T0 Yellow or white Length of boot & connector-assembly Connector type Cable 900 µ Cable > 900 µ (aramide yarn reinforced cable) SC max. 45 mm max. 55 mm FC max. 45 mm max. 55 mm E2000 max. 55 mm max. 55 mm DIN max. 55 mm max. 55 mm ST max. 55 mm max. 55 mm LC max. 35 mm max. 50 mm MU max. 40 mm max. 50 mm The length is defined as the length from the tip of the connector to the end of the boot. 3.3 Selection of the single-mode single fiber cable type Name string reference Description Fiber type µm Buffer µm Outer jacket µm ASCA Single mode, semi-tight, LSZH E9/ ASIA Single mode, semi-tight, LSZH E9/ ATAB Single mode, tight, PVC E9/ ATCB Single mode, tight, PVC E9/ ATIB Single mode, tight, PVC E9/ ASEN Single mode, semi-tight, no outer jacket E9/ ASEE Single mode, semi-tight, FOPT 0,55 m E9/ Notes Contact your local sales engineer for special customer requirements. LSZH = Low Smoke Zero Halogen

7 Page 7 of Pictures of standard single-mode connector types SC connector A push pull coupling technique. Designed specifically for use in telecommunications and datacommunication networks. For use in CATV and Wide Area networks an APC version is designed. Full ceramic ferrule and alignment sleeve for high precision interconnection. FCTY016.JPG FC connector A metal threaded coupling technique. Designed for use in telecommunications networks, specifically with telecommunications transmission equipment. Full ceramic ferrule and alignment sleeve for high precision interconnection. FCYT018.JPG E2000 connector Fiber optic connector with integrated shutter and uses a depressor to un-mate connector from adapter. Designed for use in telecommunications networks and also for CATV, LAN, WAN networks an APC version is available. E2000HRL.JPG LC connector A mini push to release latch clicking when mated in an adapter. Designed for use in high performance telecommunications networks. Available in simplex and duplex applications. Double density over existing ST and SC designs. 7N3K6101.JPG MU connector A mini push to release latch clicking when mated in an adapter. Designed for use in high performance telecommunications networks. Available in simplex and duplex applications. Double density over existing ST and SC designs. 7N3K6099.JPG

8 Page 8 of Pictures of special single-mode connector types ST connector 7N3K8747.JPG DIN connector 3.6 Pictures of single-mode adapter types SC/(U)PC connector mating simplex adapter without retainer OC-ADP-S1-S1-NNCS 7N3K6232.JPG SC/(U)PC connector mating simplex adapter with retainer OC-ADK-S1-S1-NNCS dust cap retainer adapter P&J6.JPG

9 Page 9 of 9 FC/(U)PC connector mating simplex adapter with retainer OC-ADK-F1-F1-NNCS P&J7.JPG E2000 connector mating simplex adapter with retainer OC-ADK-E8-E8-NNCS 7N50710.JPG LC/UPC connector mating duplex adapter with retainer OC-ADK-L1-L1-NNCD 7N50713.JPG MU/UPC connector mating duplex adapter with retainer 7N3K5937.JPG Tyco Electronics Raychem NV Telecom Outside Plant Diestsesteenweg 692 B-3010 Kessel-Lo, Belgium All of this information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application. Tyco Electronics makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. Tyco Electronics only obligations are those in the Standard Terms and Conditions of Sale for this product and in no case will Tyco Electronics be liable for any incidental, indirect or consequential damages arising from the sale, resale, use or misuse of the product. Tyco Electronics Specifications are subject to change without notice. In addition, Tyco Electronics reserves the right to make changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification. Tyco is a trademark. Copyright Tyco Electronics 2001