List of ISO supported G-Codes and M-functions
|
|
- Clarence Martin
- 5 years ago
- Views:
Transcription
1
2
3
4 ARISTOTLE G-Codes List of ISO supported G-Codes and M-functions G-code Function G00 Travers motion and positioning G01 Linear interpolation G02 Circular interpolation CW G03 Circular interpolation CCW G04 Dwell G06.2 Non-uniform B-Spline interpolation - NURBS G06.05 Spline Interpolation * G7 Plane rotation G7.1 Plane rotation cancel G8 3D tool path conversion to 5-axis processing G09 Exact stop G10 Tool offset value and work coordinates shift G12.1 Polar coordinate interpolation mode G13.1 Polar coordinate interpolation cancel mode G15 Polar coordinates command cancel G16 Polar coordinates command G17 XY plane designation G18 ZX plane designation G19 YZ plane designation G20 Inch input designation G21 Metric input designation G28 Return to Reference Position G29 Return from Reference Position G30 2nd, 3rd and 4th Reference Position Return G31 Skip function G34 Display a String G37 Input a Number or Numbers G40 Tool radius compensation cancel G41 Tool radius compensation, left G42 Tool radius compensation, right G43 Tool length offset, + G44 Tool length offset, - G49 Tool length offset cancel G50 Scaling off G50.1 Mirror off G51 Scaling on G51.1 Mirror on G54 Shift to work coordinate system 1 G55 Shift to work coordinate system 2 G56 Shift to work coordinate system 3 G57 Shift to work coordinate system 4 G58 Shift to work coordinate system 5 G59 Shift to work coordinate system 6 G60 Single Direction Positioning G61 Exact stop mode G62 Automatic corner override * G64 Exact stop mode cancel * G65 Non-modal call of user macro G66 Modal call of user macro G67 Modal Macro call cancel G68 Coordinate system rotation G69 Coordinate system rotation cancel G73 Drilling Canned cycle G74 Left Hand Rigid Tapping cycle G74.1 Left Hand Tapping cycle G76 Fine Boring cycle G80 Canned cycle cancel G81 Drilling cycle G82 Drilling/Counter Boring cycle G83 Peck drilling cycle G84 Rigid Tapping cycle G84.1 Tapping cycle G85 Boring cycle G86 Boring cycle G87 Back Boring cycle G88 Boring cycle G89 Boring cycle G90 Absolute command designation. G91 Incremental command designation G92 Programming of absolute zero point G93 Inverse Time Feedrate * G98 Return to initial point for canned cycles G99 Return to point R for canned cycles G110 Enable Forbidden Zone Entry Check G111 Disable Forbidden Zone Entry Check G125 Tool motion in MDI backward to the last move active (5-axis) G140 5-axis tool path rotation (RTCP) cancel G141 5-axis tool path rotation (RTCP) G147 5-axis indexing plane rotation position correction G149 Start Round and/or Chamfer. G-149 Cancel Round and/or Chamfer. G998 Smoothing On (High Speed Machining) G999 Smoothing Off G5001 Run SHARNOA G-code * Functions can be implemented by request
5 M-functions. The machine builder may specify its own M-codes, from M200 to M999, via the integrated PLC system. The standard CNC M-functions are listed in the table below. M-code M00 M01 M02 M03 M04 M05 M06 M07 M08 M09 M11 M111 M13 M14 M18 M20 M22 M24 M25 M26 M27 M29 M30 M33 M34 M35 M36 M38 M40 Function Program stop Optional stop End of program Spindle forward rotation Spindle reverse rotation Spindle stop Tool change Coolant On Spray On Coolant and Spray OFF Spindle orientation On Spindle orientation (maintenance) On Tool search Pocket search Rigid Tapping On (ISO approach) Magazine home position search End of Program and Power OFF Chip Conveyor CW On Conveyor CW and Wash Down On Conveyor CW and Wash Down Off Conveyor CCW and Wash Down On Rigid Tapping On End of Program Spindle CW On and Coolant On Spindle CCW On and Coolant On Rotary Axis A or C Clamp Rotary Axis A or C Unclamp Program, Spindle, Coolant Conv. Stop Spindle Load Adaptive Control On M41 M48 M49 M50 M51 M53 M56 M70 M71 M75 M76 M81 M82 M83 M98 M99 M104 M105 M129 M135 M136 M170 M171 M195 M199 Spindle Load Adaptive Control Off. Tool Clamp (maintenance) Tool Unclamp (maintenance) Tool length measurement devise (Renishaw or equivalent) ON Tool length measurement devise (Renishaw or equivalent) OFF Spindle measurement probe ON Manual Tool Change Graph View (versus time) On Graph View Off Pot Up (maintenance) Pot Down (maintenance) Arm 0 (maintenance) Arm 60 (maintenance) Arm 180 (maintenance) Subprogram call (ISO approach) Subprogram end. Coolant Through Spindle On Coolant Through Spindle OFF Spindle Orientation (maintenance) Tilting Axis B Clamp Tilting Axis B Unclamp Inch units (SHARNOA approach) Metric units (SHARNOA approach) Rotational axis modulo degr. Automatic change of servo parameters. The machine builder, to implement his machine design requirements, may specify other M-codes, not listed above. The machine builder and end user can address any custom made macro program and/or subroutine to run as additional M-code. This mechanism allows easy running of any program within existing program in memory (widely used by implementation of Measurement Subroutines Library). IV) Calculation functions. Standard arithmetic calculations : _ + _ - _ * _ / () # [for parameters] Logic operations: < / <= / <> / > / >= / = = / JMP / SKP Trigonometric functions: SIN / COS / TAN / CTAN / ATAN / ACOS / ASIN Mathematical functions: EXP / SQRT / LOG / ABS / ROUND / FIX / FUP / FRC
6 PS 5 VDC; +/-12VDC Controller Box XT-9001+XT-9002 USB Communication PC Ethernet, LAN, Internet Motor Power RS232 Communication Channel XT-9703 XT-9703 Motor I/O Connection I/O Connection Encoder XT-9720 PS 24VDC Motors, Encoders, Linear Scales Connections Encoder Encoder Drive Spindle Drive Spindle Drive Spindle Encoder Op. Panel Enclosure Screen, Keyboard, Mouse. MPG Power
7 SPECIFICATIONS ARISTOTLE PHYSICAL Type: Modular System with Main Processor board and System Interface boards (up to 4). Dimensions: 17x12.5 cm (6.7x4.9 inches) main board 33x11.5 cm (13x4.5 inches) System Interface board. Weight: 0.6 Kg (1.3 lb.) CPU Model: Texas Instruments DSP 320VC Type: 32-bit, Floating Point MEMORY RAM: 256 K x 32-bit words (1 Mb static memory) RAM Speed: 0 wait state Dual Ported RAM: 4 Kb Flash Memory: 8 M x 8-bit (4 Mbt) PERFORMANCE Axes: Up to 8 Axes one System Interface board Up to 16 Axes with two System Interface boards. Stepper Motors Control Mode: up to 16 Axes. Position Control Mode: up to 16 Axes. Velocity Control Mode: up to 16 Axes. Torque Control Mode: up to 16 Axes. Commutation Control Mode: up to 8 Axes. Simultaneously Controlled Synchronized Axes: Max. 8 groups of synchronized axes, max. 16 axes on each group. Flexible axes group coordinate setting. All axes in the same group (same coordinate system) are perfectly synchronized to the servo cycle. Servo Cycle Time: 250 µsec (16 axes) Commutation Cycle Time: 83 µsec (8 axes) Response Time to Command: 0.25 msec Block Execution Rate: Up to 4000 blocks/sec Servo Algorithms: PID with Feedforward; Adaptive torque Feedforward, Notch filter, S-curve speed control with user configured jerk; Autohoming procedure; Continuous vector feed with look ahead up to 512 steps; Lead and temperature screw with cross-axis compensation; Electronic Cams, Gearing; Multi-axis interpolation linear / circular. Dynamic encoder resolution change, Multi-set of motion parameters, Special control algorithms with dead zones. Cubic, spline interpolation, 1/T control, and Inverse kinematics computations are optional. INPUTS/OUTPUTS Digital I/O: 128 fast standard digital inputs/outputs for general purpose use 16 programmable ports of 8 I/O (up to 512 I/O with 4 System Interface boards - optional). Analog Inputs: 16 fast inputs (up to 64) 12-bit resolution ±10 VDC; impedance 30 kohm; 16-bit res. - optional. Analog Outputs: 8 outputs (up to 32) ±10 Volt DC 12-bit (optional 16-bit) resolution for motor commands. Can be used as general purpose DAC, when not used in motion control loop. Feedback: Standard square wave (digital encoder) and electric phase detector (encoder +Hall Effect); encoder over temperature input; sin/cos feedback optional. Second Feedback: Standard square wave. Encoder frequency: up to 10 MHz with 12-bit counter (20 MHz-optional), using dual feedback with specially developed dynamic algorithms in firmware allowing very high motion speeds with virtually no-limited input frequency of encoder readings. Programmable real position strobe signal: 1 output (4 - optional) within 0.2 microseconds. Programmable real position pulse train: 1 output (4 optional) related to encoder feedback frequency by factor Auxiliary Pulse count inputs: 4 inputs (up to 16 optional) with 8-bit by frequency up to 500 KHz High Speed Position Capture (Latch Input): 1 per axis + 8 additional inputs (up to 32) with anti-bounds protection; allows normally close or open configuration response time within 0.1 microseconds. POWER REQUIREMENTS (from on-board connector) Volt Volt Volt KINEMATICS RANGES and ACCURACY Velocity and Acceleration Ranges: No limits (due to floating point DSP) Position: ±1 Billion counts Gear Ratio Range: No limits Filter Constants: No limits Position Accuracy: ±1 count Position Capture Accuracy: within ±1 count Velocity Accuracy: 0.005% Motor Commands Accuracy: 12-bit or Volt; 16-bit or Volt optional. COMMUNICATION USB communication channel. RS 232 and RS422 (485): Serial communication channels. Fast serial communication (up to 15 Mbit/s). DEVELOPMENT ENVIRONMENT (PLC). Development Software: ProcessDesigner and ProcessDebugger Graphic FBD Language: Object Oriented Function Block Diagram standard (IEC-1131) with multitasking support for PLC development. Designer: ProcessDesigner as a PLC tool, which implements the process algorithms with inputs and outputs. Debugging: ProcessDebugger enables debugging of the process while monitoring status of each I/O signal, variables and messages. PROGRAMMING LANGUAGE API Functions for Windows 98/ME/NT/2000/XP: DLL functions and ComServer methods available in C, C++, MS VC++, ANSI C, MS Visual Basic, Delphi allowing customization of operator interfaces. Scripting Language: Simple, based on TCL scripting environment supporting variables, math expressions, subroutine call, comparisons, etc. and extended for motion control commands (allows use of simple ASCII code, ISO G-code, SHARNOA G-code and HPGL file formats). CONFIGURATION TOOLS Development Software: ControlConfiguration software allows system setup, configuration of the machine limits, tuning and executing of any defined task to test real operation of the machine. MotionAnalyzer allows monitoring of real motion parameters as in multi-channel oscilloscope with memory AxisMotion and MotionViewer simple tests utilities. Ballbar utility allowing easy test of axes interpolation. Graphic Interface: Graphic displays show status and response of axes, real parameter values.
8
9
10
11
12
ADVANCED TECHNIQUES APPENDIX A
A P CONTENTS þ Anilam þ Bridgeport þ Fanuc þ Yasnac þ Haas þ Fadal þ Okuma P E N D I X A ADVANCED TECHNIQUES APPENDIX A - 1 APPENDIX A - 2 ADVANCED TECHNIQUES ANILAM CODES The following is a list of Machinist
More information9000 CNC 9000 CNC: THE NEW STANDARD OF CONTROL. INTUITIVE EFFICIENT PRODUCTIVE
3D Solid Model Graphics Solid Model with Tool Path Overlay 9000 CNC 9000 CNC: THE NEW STANDARD OF CONTROL. At Milltronics we are constantly refining our controls to simplify operation, shorten setup times
More informationLesson 4 Introduction To Programming Words
Lesson 4 Introduction To Programming Words All CNC words include a letter address and a numerical value. The letter address identifies the word type. The numerical value (number) specifies the value of
More informationMach4 CNC Controller Mill Programming Guide Version 1.0
Mach4 CNC Controller Mill Programming Guide Version 1.0 1 Copyright 2014 Newfangled Solutions, Artsoft USA, All Rights Reserved The following are registered trademarks of Microsoft Corporation: Microsoft,
More informationG & M Code REFERENCE MANUAL. Specializing in CNC Automation and Motion Control
REFERENCE MANUAL Specializing in CNC Automation and Motion Control 2 P a g e 11/8/16 R0163 This manual covers definition and use of G & M codes. Formatting Overview: Menus, options, icons, fields, and
More informationGalil Motion Control. DMC - 42x0. Datasheet
Galil Motion Control DMC - 42x0 Datasheet Product Description The DMC-42x0 is part of Galil s highest performance, stand- alone motion controller Accellera family. Similar to the rest of Galil s latest
More informationCHAPTER 12. CNC Program Codes. Miscellaneous CNC Program Symbols. D - Tool Diameter Offset Number. E - Select Work Coordinate System.
General CHAPTER 12 CNC Program Codes The next three chapters contain a description of the CNC program codes and parameters supported by the M-Series Control. The M-Series Control has some G codes and parameters
More informationMach4 CNC Controller Lathe Programming Guide Version 1.0
Mach4 CNC Controller Lathe Programming Guide Version 1.0 1 Copyright 2014 Newfangled Solutions, Artsoft USA, All Rights Reserved The following are registered trademarks of Microsoft Corporation: Microsoft,
More informationMach4 CNC Controller Mill Programming Guide Version 1.1 Build 3775
Mach4 CNC Controller Mill Programming Guide Version 1.1 Build 3775 Copyright 2014 Newfangled Solutions, Artsoft USA, All Rights Reserved The following are registered trademarks of Microsoft Corporation:
More informationHAAS AUTOMATION, INC.
PROGRAMMING WORKBOOK HAAS AUTOMATION, INC. 2800 Sturgis Rd. Oxnard, CA 93030 JUNE 1, 2000 JUNE 2000 PROGRAMMING CONTENTS INTRODUCTION... 1 THE COORDINATE SYSTEM... 2 MACHINE HOME... 5 ABSOLUTE AND INCREMENTAL
More informationEPOS2 Positioning Controllers
EPOS2 Positioning Controllers CANopen (online commanded) Single motion and I/O commands from the process control are transmitted to the positioning control unit by a superior system (). For that purpose
More informationSoloist Linear Series
Soloist Linear Series Position Controller and Servo Amplifier Linear Single axis digital servo controller with integral power supply and amplifier Advanced software architecture shortens customer development
More informationSoloist. Position Controller and Servo Amplifier. Single axis digital servo controller with integral power supply and amplifier
Soloist Series Motion Controllers Soloist Position Controller and Servo Amplifier Single axis digital servo controller with integral power supply and amplifier Advanced software architecture shortens customer
More informationGalil Motion Control. DMC - 18x6. Datasheet (US ONLY)
Galil Motion Control DMC - 18x6 Datasheet Galil Motion Control 270 Technology Way, Rocklin, CA 1-916-626-0101 (US ONLY) 1-800-377-6329 Product Description The DMC-18x6 PCI bus motor controllers belong
More informationWelcome to. the workshop on the CNC 8055 MC
Welcome to the workshop on the CNC 8055 MC Sales Dpt-Training: 2009-sept-25 FAGOR CNC 8055MC seminar 1 Sales Dpt-Training: 2009-sept-25 FAGOR CNC 8055MC seminar 2 This manual is part of the course for
More informationA-SERIES BED MILLS. 3-Axis CNC for Job Shops, Tool Rooms, and Production Operations. Featuring Semi-Automatic + Conversational Programming + G-Code
A-SERIES BED MILLS 3-Axis CNC for Job Shops, Tool Rooms, and Production Operations Featuring Semi-Automatic + Conversational Programming + G-Code A-Series Bed Mills are offered in two styles: NC HEAD The
More informationGalil Motion Control. DMC - 500x0. Datasheet. Galil Motion Control 270 Technology Way, Rocklin, CA [Type here] [Type here] [Type here]
Galil Motion Control DMC - 500x0 Datasheet Galil Motion Control 270 Technology Way, Rocklin, CA 1-800-377-6329 [Type here] [Type here] [Type here] Product The DMC-500x0 EtherCAT Controller is Galil Motion
More informationCentury Star Turning CNC System. Programming Guide
Century Star Turning CNC System Programming Guide V3.5 April, 2015 Wuhan Huazhong Numerical Control Co., Ltd 2015 Wuhan Huazhong Numerical Control Co., Ltd Preface Preface Organization of documentation
More informationMAIN TECHNICAL SPECIFICATIONS
S4045P S4045P The S4045PD is suited for highspeed machines destined to mill complex surfaces. It is extremely fast and powerful and is equipped with the Intel PC CPU for the operator interface and also
More informationUp to 4-axis plus closed-loop spindle Conversational and G-Code programming in one control Systems for knee mills, bed mills and VMC s USB interface
Up to 4-axis plus closed-loop spindle Conversational and G-Code programming in one control Systems for knee mills, bed mills and VMC s USB interface Acu-Rite 3500i boosts efficiency, versatility, touch
More informationGalil Motion Control. Sold & Serviced By: [ Toll Free Phone: here] Toll Free Fax:
Galil Motion Control DMC - 40x0 Datasheet [ here] Product The DMC-40x0 is Galil s highest performance, stand- alone motor controller. It belongs to Galil s latest generation motion controller family which
More informationKA3-6VS 300mm KA3-6VS 400mm Vertical Spindle
Vertical KA3-6VS 300mm KA3-6VS 400mm Vertical Spindle The Kira KA3- Series of traveling column (3) Axis CNC Machining Modules are an excellent choice for special application machine builders. These modules
More informationAutomation 3200-OEM/Nservo-OEM
Automation 3200-OEM/Nservo-OEM Motion Controllers Automation 3200-OEM/Nservo-OEM 32-Axis Motion, Vision, Robotics, and I/O Platform Complete motion capabilities include: point-topoint; linear, circular,
More informationGSK218M Milling Machine CNC System
GSK218M Milling Machine CNC System GSK218M is widespread CNC system (matched with machining center and general milling machine) employed with 32-bit high performance CPU and super-large-scale programmable
More informationCNC Knee Type Milling Machines with USA CENTROID M-400S CNC control
CNC Knee Type Milling Machines with USA CENTROID M-400S CNC control GMM-949-CNC, 9 x49 table, R8, vari-speed, 3 axis CNC... GMM-949F-CNC, 9 x49 table, R8, inverter drive, 5,000 rpm, 3 axis CNC.. Note:
More informationSeries 0ί -MD Mate CNC STANDARD FEATURES
STANDARD FEATURES Axis Control Digital Servo Function 1 Controlled Path Simultaneously controlled axes: Up to maximum of 3 Serial Encoder Interface Axis Name Selected from X,Y,Z and U,V,W,A,B,C Spindle
More informationMacro B Reference Guide
Macro B Reference Guide Macro B programming may not be included on your MachMotion control. If you are not able to use these macros, contact us for an upgrade option. 1. Calling macros Call Format s Example
More informationSYSTEM SPECIFICATION
SYSTEM SPECIFICATION CNC Series PA 8000e PA Power Automation AG Tel.: ++49-(0) 7144-899-0 Gottlieb-Daimler-Straße 17/2 Fax: ++49-(0) 7144-899-299 D-74385 Pleidelsheim www.powerautomation.com Germany sales@powerautomation.com
More informationEpsilon EP. Compact and Economical. 16 Amp Drive. RoHS approved option! Position Tracker. Epsilon EP.
Compact and Economical The Series is the most compact digital servo drive in the Control Techniques lineup. Designed to fit in cabinets as small as six inches (152 mm) deep, with cables attached. The drives
More informationTF5xxx TwinCAT 3 Motion Control
TF5xxx Motion Control TC3 NC PTP 10 Axes TC3 NC PTP Axes Pack 25 TC3 NC PTP Axes Pack unlimited Technical data TF5000-00pp TF5010-00pp TF5020-00pp TC3 NC PTP 10 Axes implements Motion Control for pointto-point
More informationDCX-PCI300 Motion Controller
DCX-PCI300 Motion Controller An Introductory Guide to the DCX-PCI300 Motion Control Card... The DCX-PCI 300 combines state-of-the-art motion control technology with the flexible and field-proven multi-processor
More informationEnsemble Linear Series
Motion Controllers Ensemble Linear Ensemble Linear Series Networked, Panel-Mount Drives Linear Network drives through a high-speed serial interface to coordinate up to ten axes of motion Coordinate motion
More informationPart Programming Manual MACHINEMATE
MACHINEMATE NOTE Progress is an ongoing commitment at MACHINEMATE INC. We continually strive to offer the most advanced products in the industry. Therefore, information in this document is subject to change
More informationPreface. GSK983Ma User Manual divides into three parts, that is, Programming, Operation and Appendix.
This user manual describes all proceedings concerning the operations of this CNC system in detail as much as possible. However, it is impractical to give particular descriptions for all unnecessary or
More informationConversational Programming for 6000M, 5000M CNC
Conversational Programming for 6000M, 5000M CNC www.anilam.com P/N 70000486F - Contents Section 1 - Introduction Section 2 - Conversational Mode Programming Hot Keys Programming Hot Keys... 2-1 Editing
More informationSoftware designed to work seamlessly with your CNC Masters machine. Made to work with Windows PC. Works with standard USB
Software designed to work seamlessly with your CNC Masters machine Made to work with Windows PC Works with standard USB Clutter free interface. The software is engineered for the machine so you don t have
More informationGalil Motion Control. EDD 3701x
Galil Motion Control EDD 3701x Datasheet : Digital Drive 1-916-626-0101 Galil Motion Control 270 Technology Way, Rocklin, CA [Type here] [Type here] (US ONLY) 1-800-377-6329 [Type here] Product Description
More informationMotion Controller. MXC Series Multi-Axis Motion Controller Compact Motion Controller with up to 6 Axes of Control
MXC Series Multi-Axis Motion Controller Compact Motion Controller with up to 6 Axes of Control Allied Motion s MXC motion controller is a very compact, multi-axis servo and/or step motor motion controller,
More informationEC X17 - Installing guide
EC X17 - Installing guide Features This 4 Axis CNC Stand-Alone stepper Controller ensures smooth and accurate fast motion Command and program loading is made from the EC Watch software via USB or Ethernet
More informationOur thanks go to: Puppy Linux, RTAI, EMC, axis, all the kernel developers and big mama thornton.
CoolCNC Linux First Steps This manual is a step by step introduction for the installation of the CoolCNC Linux Live CD. Its intent is to lead to a better understanding of the current processes. This document
More informationEC X17 - CNC Ethernet Stepper Controller
EC X17 - CNC Ethernet Stepper Controller Features This 4 Axis CNC Stand-Alone stepper Controller ensures smooth and accurate fast motion Command and program loading is made from the EC Watch software via
More information6000i CNC User s Manual
6000i CNC User s Manual January 2008 Ve 02 627785-21 1/2008 VPS Printed in USA Subject to change without notice www.anilam.com P/N 627785-21 - Warranty Warranty ANILAM warrants its products to be free
More informationLexium MDrive. LMD M57 programmable Motion Control REACH IP65. Product overview. General features. Intelligent motion systems
Lexium MDrive LISTED REACH IP65 Product overview Robust Lexium MDrive Motion Control products integrate 1.8 2-phase stepper motors with control electronics including an on board programmable motion controller
More informationAddendum for Acromill 15.00
Addendum for Acromill 15.00 Objective... 1 Differences between previous versions and version 15.00... 3 New Commands... 5 IF COMMAND...5 WHILE COMMAND...5 $I INCLUDE FILE COMPILER DIRECTIVE...5 G9 EXACT
More informationProgramming Features PERFORMANCE & SPECIFICATIONS
PERFORMANCE & SPECIFICATIONS Essentials Processor Intel Pentium Instruction Set 32-bit Performance Number of Cores 1 Processor Base Frequency 1.8 GHz Memory Data Storage 1 GB System Memory Installed 2
More informationSPHINX-5X/30. Five Axis Machining Center SPHINX-5X/30. NAMSUN Machinery Corporation 1. With Hidenhain i TNC 530. Five Axis Machining Center
Five Axis Machining Center With Hidenhain i TNC 530 The external color and design may be modified for improvements NAMSUN Machinery Corporation 1 High Speed, High Precision Spindle Because we adopt high
More informationConversational Programming for 6000i CNC
Conversational Programming for 6000i CNC www.anilam.com P/N 634 755-22 - Contents Section 1 - Introduction Section 2 - Conversational Mode Programming Hot Keys Programming Hot Keys... 2-1 Editing Keys...
More informationNOTE This function is optional.
5.AUTOMATIC OPERATION B-63943EN-1/03 5.8 RETRACE M Overview The tool can retrace the path along which the tool has moved so far (reverse execution). Furthermore, the tool can move along the retraced path
More informationTurning Hardinge GS 51MS Turning Center
Turning Hardinge GS 51MS Turning Center Quotation to: ABMNameAlpha Quotation Number: SOHDocumentOrderInvoice Contact: Contact Name Address: ShipToAddressLine1 ShipToAddressLine2 ShipToAddressLine3 ShipToAddressLine4
More informationDUNS #: Established Since 1985/Veteran Owned
RAAR Enterprises, Inc. S. California Sales ffice P Box 3476 Redondo Beach, CA 90277 USA Ph: 310-487-3800 Fx: 702-947-6320 Director: Rick Schotts Email: rick.raargroup@gmail.com DUNS #: 079-275-790 Established
More informationFANUC Series 30+-MODEL B FANUC Series 31+-MODEL B FANUC Series 32+-MODEL B. For Lathe System OPERATOR'S MANUAL B-64484EN-1/02
FANUC Series 30+-MODEL B FANUC Series 31+-MODEL B FANUC Series 32+-MODEL B For Lathe System OPERATOR'S MANUAL B-64484EN-1/02 No part of this manual may be reproduced in any form. All specifications and
More informationMELDAS, MELDASMAGIC, and MELSEC are registered trademarks of Mitsubishi Electric Corporation. The other company names and product names are
MELDAS, MELDASMAGIC, and MELSEC are registered trademarks of Mitsubishi Electric Corporation. The other company names and product names are trademarks or registered trademarks of the respective companies.
More informationCOPYCAT NEW FANGLED SOLUTIONS 2/6/2009
1.0 INTRODUCTION 1.1 CopyCat is a unique wizard used with MACH3. It is not a stand alone program. This wizard will allow you to jog a machine around and create a Gcode file from the movement. 2.0 REQUIREMENTS
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationFeatures and Benefits
..........................................................................3-15 Features and Benefits..............................................................................3 LTS Technical Specifications.........................................................................4
More informationMach4 Lathe G-Code and M-Code Reference
Mach4 Lathe G-Code and M-Code Reference Chapter 1: Introduction G-Code is a special programming language that is interpreted by Computer Numerical Control (CNC) machines to create motion and other tasks.
More informationFeatures & Specifications V
Features & Specifications V18.0919 KEEP THE IRON. UPGRADE YOUR MACHINE. A Turnkey Solution to easily replace your Fadal Control Utilize your existing AC/DC servo components and wiring Replace your old
More informationACR-MotionMax Programmer's Reference Manual
ACR-MotionMax Programmer's Reference Manual Programmer's Reference Manual Programming Information - 1 User Information ACR Series products are used to control electrical and mechanical components of motion
More informationCNC 8070 (SOFT 02.0X) REF Quick reference
CNC 8070 (SOFT 02.0X) REF. 0504 Quick reference INDEX Screen description 1 Description of the keys 2 Manual (jog) mode 4 MDI mode 8 Automatic mode 9 Editing - simulation mode 11 List of "G" functions 12
More information130Series. CNC Horizontal Boring & Milling Machines SNK AMERICA, INC. MACHINE TOOL GROUP
130Series CNC Horizontal Boring & Milling Machines SNK AMERICA, INC. MACHINE TOOL GROUP 100 Howard Street Elk Grove, IL 60007 Tel: 47.364.001 Fax: 47.364.4363 www.snkamerica.com PRINTED IN USA 0/0 CNC
More informationFANUC Series 30+-MODEL B FANUC Series 31+-MODEL B FANUC Series 32+-MODEL B. For Machining Center System OPERATOR'S MANUAL B-64484EN-2/03
FANUC Series 30+-MODEL B FANUC Series 31+-MODEL B FANUC Series 32+-MODEL B For Machining Center System OPERATOR'S MANUAL B-64484EN-2/03 No part of this manual may be reproduced in any form. All specifications
More informationMachine Tool Products. Siemens SINUMERIK 828 CNC Kit. for. Knee Mills
Machine Tool Products Siemens SINUMERIK 828 CNC Kit for Knee Mills Revised: 08/22/2018 For more information or to request a quote please contact: MTP Support Email: support@machinetoolproducts.com Cell:
More informationTechnology for Machining Centres
Technology for Machining Centres The OSAI solution for machining centres Based on the OPENcontrol CNC paltform, OPENMill is a modern and flexible system managing the most simple, up to the more complex
More informationC i t o. AMCS-S-0x-MS. Advanced Motion Control Server For Microstepping Motors. S y s t e m s. Product Description
C i t o S y s t e m s Advanced Motion Control Server For Microstepping Motors AMCS-S-0x-MS Product Description AMCS [pronounced. a-maks] (Advanced Motion Control Server) is an advanced server designated
More informationCNC. Compact, 6 axes IndraMotion MTX micro
Compact, 6 axes IndraMotion MTX micro 2 Bosch Rexroth AG Electric Drives and Controls Documentation Broschures Easy startup Software Hardware IndraMotion MTX micro efficiency with a full scope of functions
More informationXPS Universal High-Performance Motion Controller/Driver
844 XPS Universal High-Performance Motion Controller/Driver MOTORIZED LINEAR The XPS is an extremely high-performance, easy to use, integrated motion controller/driver offering high-speed communication
More informationCNC AFFOLTER. 4Powerful. 4Universal. 4User-friendly
CNC Numerical Controls 4 4Powerful 4Universal 4User-friendly AFFOLTER CNC LESTE General description The CNC controls of the Leste series provide powerful processing, universal functionalities, simple commissioning
More informationCNC MACHINE CONTROLLER
CNC MACHINE CONTROLLER PERFECT CNC SOLUTION FOR MACHINE TOOLS INDUSTRY USB AC MAIN SUPPLY RS485 COMMUNICATION RS232 COMMUNICATION EMG SMPS I/O Module MPG XYZ Structure Spindle Encoder Spindle System TURNING
More informationTouch Control Panels. Precision Built Solutions
Touch 2200 Control Panels Precision Built Solutions The Touch 2200 provides world class technology and advanced features not available in other controls proving that east-to-use does not have to mean compromising
More informationCOMPUTER NUMERICAL CONTROL OF MACHINE TOOLS
COMPUTER NUMERICAL CONTROL OF MACHINE TOOLS Department of Mechanical Engineering and Aeronautics University of Patras, Greece Dr. Dimitris Mourtzis Associate professor Patras, 2017 1/52 Chapter 8: Two
More informationStand-Alone, Multi-Axis Motion Controller
Ensemble LAB Stand-Alone, Multi-Axis Motion Controller Up to 4 axes of brush, stepper or brushless DC motors Aerotech s FlashConfig feature automatically configures axis parameters based on the connected
More informationGE Intelligent Platforms. Flexible Motion Solutions
GE Intelligent Platforms Flexible Motion Solutions Build motion control into a competitive advantage Set your machine apart with a flexible motion solution that delivers precise, powerful capabilities
More informationNdrive Linear Series. Digital Servo Amplifiers Linear. Output power range of 10 or 20 A peak with ±10 to ±80 VDC bus
Ndrive Linear Amplifiers/Drives Ndrive Linear Series Digital Servo Amplifiers Linear Output power range of 10 or 20 A peak with ±10 to ±80 VDC bus 2- or 3-phase AC line input or DC input CE approved and
More informationIEEM 215. Manufacturing Processes I Introduction to the ARIX CNC milling machine
IEEM 215. Manufacturing Processes I Introduction to the ARIX CNC milling machine The image below is our ARIX Milling machine. The machine is controlled by the controller. The control panel has several
More informationSouthwestern Industries, Inc. DPM RX7 Bed Mill Specifications with the ProtoTRAK RMX Control
Southwestern Industries, Inc. DPM RX7 Bed Mill Specifications with the ProtoTRAK RMX Control Machine Specifications Table size 76 x 14 T-slots (number x width x pitch) 3 x 16mm x 63.5mm Travel (X, Y, Z
More informationM-SERIES Operator s Manual
M-SERIES Operator s Manual CNC12 Version 4.12 U.S. Patent #6490500 c 2018 Centroid Corp. Howard, PA 16841 Throughout this manual and on associated products where applicable, in accordance with ANSI Z535,
More informationSOFTWARE. CAD/CAM software. Interpreter software. Programming software. Software and control organization isy-cam 2.5 PLUS...
SOFTWARE Software and control organization... 4-2 CAD/CAM isy-cam 2.5 PLUS... 4-4 Interpreter Remote... 4-5 Programming... 4-6 PAL-PC 2.1... 4-7 Software and controller organisation Software and controller
More informationGeneral Description. Galil Controllers
Command Language Galil s Command Language is comprised of intuitive, two-letter, Englishlike ASCII commands that make programming as quick and easy as possible. For example, the BG command begins motion
More informationFAGOR AUTOMATION MC TRAINING MANUAL
FAGOR AUTOMATION MC TRAINING MANUAL ACER MC TRAINING MANUAL 8 holes 1/2" depth grid pattern R0.125 1.5 6 unit: inch R0.25 4 1.25 2 2.675 1/2" depth rectangular pocket 1/2" depth circular pocket R0.75 8
More informationUltra5000 Intelligent Positioning Drive Frequently Asked Questions
Ultra5000 Intelligent Positioning Drive Frequently Asked Questions Q: What is the Ultra5000? A: The Ultra5000 Intelligent Positioning Drive is one of the latest additions to the popular Ultra series of
More informationCNC C6/C64/C64T PROGRAMMING MANUAL (LATHE TYPE) BNP-B2264D(ENG)
CNC C6/C64/C64T PROGRAMMING MANUAL (LATHE TYPE) BNP-B2264D(ENG) MELDAS is a registered trademark of Mitsubishi Electric Corporation. Other company and product names that appear in this manual are trademarks
More informationUser s Manual V MillPlus IT. NC Software
User s Manual V600-02 MillPlus IT NC Software 538 952-02 538 953-02 538 954-02 538 955-02 538 956-02 English (en) 6/2008 Controls on the visual display unit Select window User keys Manual operation Axis-direction
More informationLabCenter 260. LabCenter 260. CNC Milling Machine. Compact Machine for Training Purposes and Small Batch Production - with Siemens control
CNC Milling Machine Compact Machine for Training Purposes and Small Batch Production - with Siemens control Travel X-axis Y-axis Z-axis Spindle speed max. Tool changer 251 mm 152 mm 168 mm 5000 rpm 4 stations
More informationMachine Tool Products. Siemens SINUMERIK 828 CNC Kit. for. Large-Small Bed Mills. (6Nm/12Nm)
Machine Tool Products Siemens SINUMERIK 828 CNC Kit for Large-Small Bed Mills (6Nm/12Nm) Revised: 10/08/2018 For more information or to request a quote please contact: MTP Support Email: support@machinetoolproducts.com
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More information31i-B5M 2/11/2016 Page 1
STANDARD FEATURES Axis Control Digital Servo Function 1 Controlled Path 3 (up to maximum of 5) Simultaneously Controllable Axes (J801) (J803) Serial Encoder Interface Axis Names Selected from X,Y,Z,U,V,W,A,B,C
More informationNcStudio Programming Manual
NcStudio Programming Manual 6th Edition Weihong Electronic Technology Co., Ltd. The copyright of this manual belongs to Weihong Electronic Technology Co., Ltd. (hereinafter referred to as Weihong Company).
More informationConversational Programming for 6000i CNC
Conversational Programming for 6000i CNC January 2008 Ve 01 634755-21 1/2008 VPS Printed in USA Subject to change without notice www.anilam.com P/N 634755-21 - Warranty Warranty ANILAM warrants its products
More information5000M CNC Programming and Operations Manual
5000M CNC Programming and Operations Manual www.anilam.com P/N 70000508G - Warranty Warranty ANILAM warrants its products to be free from defects in material and workmanship for one (1) year from date
More informationCNC C6/C64/C64T DDB INTERFACE MANUAL
CNC C6/C64/C64T DDB INTERFACE MANUAL BNP-B2312A(ENG) MELDAS and MELSEC are registered trademarks of Mitsubishi Electric Corporation. The other company names and product names are trademarks or registered
More informationIntroduction CAUTION. Details described in this manual
Introduction This manual is a guide for using the MELDAS 60/60S Series, MELDASMAGIC64. Programming is described in this manual, so read this manual thoroughly before starting programming. Thoroughly study
More informationAutomation Software-Based 32-Axis Motion, Vision, PLC, Robotics, and I/O Platform
Automation 3200 Series Motion Controllers Automation 3200 Software-Based 32-Axis Motion, Vision, PLC, Robotics, and I/O Platform Complete motion capabilities include: point-topoint; linear, circular, helical,
More informationCNC USB Controller. User manual
CNC USB Controller User manual 2010-06-26 1 Table of Contents 1 2 Introduction...8 1.1 Overview...8 1.2 System Requirements...8 Hardware...9 2.1 Specification and features...9 2.2 Board description...10
More informationConversational Programming for 6000M, 5000M CNC
Conversational Programming for 6000M, 5000M CNC www.anilam.com P/N 70000486E - Warranty Warranty ANILAM warrants its products to be free from defects in material and workmanship for one (1) year from date
More informationSTANDARD FEATURES with MXP-200FB (FANUC-32i)
STANDARD FEATURES with MXP-200FB (FANUC-32i) POWERFUL 30 HP SPINDLE OUTPUT HIGH SPEED 30 TOOL SWING-ARM ATC SYSTEM HIGH PRECISION CERAMIC SPINDLE BEARINGS RANDOM ACCESS & BI-DIRECTIONAL ATC MAGAZINE IDD
More informationServoWorks CNC: Ultimate PC-Based, Truly Open-Architecture Soft CNC Solutions. Powerful PC-Based Affordable Scalable
ServoWorks CNC: Ultimate PC-Based, Truly Open-Architecture Soft CNC Solutions Powerful PC-Based Affordable Scalable Complete PC-based solutions for critical CNC requirements Soft Servo s ServoWorks CNC
More informationSection 20: Graphics
Section 20: Graphics CNC 88HS Graphics Graphics Menu The graphics menu of the page editor has been designed to allow the user to view the part path of the current program in memory. The graphics can be
More informationSTAC5 Stepper Drives. A high performance, compact and cost-effective stepper drive with advanced features and control options
STAC5 Stepper Drives A high performance, compact and cost-effective stepper drive with advanced features and control options Ethernet & EtherNet/IP Advanced Current Control Anti-Resonance Torque Ripple
More informationPROGRAMMING WORKBOOK HAAS AUTOMATION, INC 2800 Sturgis Rd Oxnard, CA 93030 January 2004 JANUARY 2004 PROGRAMMING HAAS AUTOMATION INC 2800 Sturgis Road Oxnard, California 93030 Phone: 805-278-1800 www
More informationCENTROID. M-SERIES Operator's Manual. Version 8.22 Rev U.S. Patent # Centroid Corp. Howard, PA 16841
CENTROID M-SERIES Operator's Manual Version 8.22 Rev. 030826 U.S. Patent #6490500 2004 Centroid Corp. Howard, PA 16841 CNC Control Information Sheet Fill out the following and fax back to Centroid Tech
More information