Section 2. Connectors Field attachable
|
|
|
- Katherine Arnold
- 5 years ago
- Views:
Transcription
1 E L E C T R O N I C C O N N E C T O R S Section 2 Connectors Field attachable
2 89
3 SAL M8x1 Connectors Field attachable Nomenclature S A L R K W C 4 - L 5,5 SAL Sensor Actor Line Installation size 8 = M8x1 = Standard S = Standard, shielded Design R = Circular connector Gender K = Female connector S = Male connector Configuration = Axial W = Angled Design C = Field attachable 3 = 3-pos. 4 = 4-pos. Termination L = Soldering termination up to max mm 2 K = Clamp connection for 0.14 mm mm 2 S = Screw termination up to max. 0.5 mm 2 Outer Ø cable 5,5 = 4 mm mm 6,5 = 5 mm mm 90
4 SAL M8x1 Connectors Field attachable Product specification Basic material Contact Contact plating Contact carrier Housing Cable sealing Sealing Coupling nut/-screw CuZn Nickel plated, gold plated PA6 GF, UL 94 / PA6, UL 94 PA6 GF, UL 94 NBR FPM GD-Zn, Ni / CuZn, Ni Technical Data Information on the following pages are basing on below mentioned IEC-standards. Rated voltage Current rating Insulation resistance Degree of pollution Degree of protection Mating cycles IEC IEC IEC IEC IEC IEC a Recommended torquet: 0.4 Nm Technical subject to change without notice. 91
5 SAL M12x1 Connectors Field attachable Nomenclature S A L R K W C E 4 - S / / A5220 SAL Sensor Actor Line Installation size 12 = M12x1 = A-coding S = A-coding, shielded Design R = Circular connector Gender K = Female connector S = Male connector Configuration = Axial W = Angled Design C = Field attachable CE = Field attachable with stainless steel coupling nut/screw 4 = 4-pos. 5 = 5-pos. 8 = 8-pos. Type of connection S = Screw termination K = Clamp connection C = Crimp connection Terminal cross section = max. 0.5 mm = max. 1.0 mm 2 = max. 1.5 mm 2 Contact plating = Gold over nickel A5220 = CuSnZn 92
6 SAL M12x1 Connectors Field attachable Product specification Basic material Contact Contact plating Contact carrier Housing Clamp-/screw contact Screw termination Cable sealing Sealing Coupling nut/-screw CuZn Nickel plated, gold plated / CuSnZn PA6, UL 94 Standard: PA6 GF, UL 94 / Shielded: Die Cast, nickel plated Stainless steel nickel plated CuZn/Ni, Sn gal. Elastomere FPM GD-Zn, Ni / stainless steel Technical Data Information on the following pages are basing on below mentioned IEC-standards. Rated voltage Current rating Insulation resistance Degree of pollution Degree of protection Mating cycles IEC IEC IEC IEC IEC IEC a Recommended torquet: 0.6 Nm Technical subject to change without notice. 93
7 SAL 7/8" Connectors Field attachable Nomenclature S A L - 7 / 8 - R K C 4 - S SAL Sensor Actor Line Installation size 7/8 = 7/8" Design R = Circular connector Gender K = Female connector S = Male connector Design C = Field attachable 2PE = 2-pos. + PE 4 = 4-pos. 4PE = 4-pos. + PE Type of connection S = Screw termination 94
8 SAL 7/8" Connectors Field attachable Product specification Basic material Contact Contact plating Contact carrier CuZn Nickel plated, gold plated TPU, UL 94 Housing Cable sealing PA6 GF, UL 94 Elastomere Coupling nut/-screw CuZn, nickel plated Technical Data Information on the following pages are basing on below mentioned IEC-standards. Rated voltage Overvoltage category IEC IEC Overvoltage impulse IEC ,7kV Current rating IEC Insulation resistance IEC Degree of pollution IEC Degree of protection IEC Mating cycles IEC a Technical subject to change without notice. 95
9 SAL M23 Connectors Field attachable Nomenclature S A L R K C C SAL Sensor Actor Line Installation size 23 = M23 Design R = Circular connector Gender K = Female connector S = Male connector Design C = Field attachable 16+3 = 16x Signal- + 3x Power contacts = 8x Signal- + 3x Power contacts Type of termination C = Crimp termination L = Soldering termination 96
10 SAL M23 Connectors Field attachable Product specification Basic material Contact Contact plating Contact carrier CuZn Nickel plated, gold plated PA6, UL 94 / PBT, UL 94 Housing Cable sealing Coupling nut/-screw GD-Zn, Ni Elastomere GD-Zn, Ni Technical Data Information on the following pages are basing on below mentioned IEC-standards. Rated voltage Current rating Insulation resistance Degree of pollution Degree of protection Mating cycles IEC IEC IEC IEC IEC IEC a Technical subject to change without notice. 97
11 SAL M23 Connectors Field attachable with cable Nomenclature S A L R K C 16+3 / 5 / K 1 SAL Sensor Actor Line Installation size 23 = M23 Design R = Circular connector Gender K = Female connector S = Male connector Design C = Field attachable 16+3 = 16x Signal- + 3x Power contacts = 8x Signal- + 3x Power contacts Cable length xx = Length [m] Cable quality K1 = TPU, black, high flexible, halogenfree, UL 98
12 SAL M23 Connectors Field attachable with cable Product specification Basic material Contact Contact plating Contact carrier CuZn Nickel plated, gold plated PA6, UL 94 / PBT, UL 94 Housing Cable sealing Coupling nut/-screw GD-Zn, Ni Elastomere GD-Zn, Ni Technical Data Information on the following pages are basing on below mentioned IEC-standards. Rated voltage Current rating Insulation resistance Degree of pollution Degree of protection Mating cycles IEC IEC IEC IEC IEC IEC a Technical subject to change without notice. 99
13 SAL Rund24 Connectors Field attachable Nomenclature S A L R K C 3 P E - S SAL Sensor Actor Line Installation size 24 = Rund24 Design R = Circular connector Gender K = Female connector S = Male connector Design C = Field attachable 3PE = 3-pos. + PE 6PE = 6-pos. + PE Type of connection S = Screw termination 100
14 SAL Rund24 Connectors Field attachable Product specification Basic material Contact Contact plating CuZn Ni, Ag gal. Contact carrier PA6 GF, UL 94 Housing Cable sealing Sealing Coupling nut/-screw PA6 GF, UL 94 Elastomere FPM PA GF, UL 94 Technical Data Information on the following pages are basing on below mentioned IEC-standards. Rated voltage Current rating Insulation resistance Degree of pollution Degree of protection IEC IEC IEC IEC IEC Mating cycles IEC a Technical subject to change without notice. 101
![cable [mm] Wire cross section min-max [mm²] Description Part No.](/docs-images/88/115405596/images/15-2.jpg "3 4 4-5,5 SAL-8-RKC3-S5,5 42-00010 4 4 4-5,5 SAL-8-RKC4-S5,5")
15 M8x1 Connectors field attachable Screw termination Female connector axial Rated voltage [V] Current rating [A] Outer ø cable [mm] Wire cross section min-max [mm²] Description Part No ,5 SAL-8-RKC3-S5, ,5 SAL-8-RKC4-S5, Female connector angled ,5 SAL-8-RKWC3-S5, ,5 SAL-8-RKWC4-S5, Clamp termination Female connector axial ,5 0,14-0,34 SAL-8-RKC3-K5, ,5 0,14-0,34 SAL-8-RKC4-K5, Solder termination Female connector axial ,5 0,14-0,34 SAL-8-RKC3-L5, ,5 0,14-0,34 SAL-8-RKC4-L5, Technical information starting on page 348
![Wire cross section min-max [mm²] Description Part No.](/docs-images/88/115405596/images/16-2.jpg "3 4 4-5,5 SAL-8-RSC3-S5,5 42-00009 4 4 4-5,5 SAL-8-RSC4-S5,5")
16 M8x1 Connectors field attachable Screw termination Male connector axial Rated voltage [V] Current rating [A] Outer ø cable [mm] Wire cross section min-max [mm²] Description Part No ,5 SAL-8-RSC3-S5, ,5 SAL-8-RSC4-S5, Male connector angled ,5 SAL-8-RSWC3-S5, ,5 SAL-8-RSWC4-S5, Clamp termination Male connector axial ,5 0,14-0,34 SAL-8-RSC3-K5, ,5 0,14-0,34 SAL-8-RSC4-K5, Solder termination Male connector axial ,5 0,14-0,34 SAL-8-RSC3-L5, ,5 0,14-0,34 SAL-8-RSC4-L5, Technical information starting on page
17 M8x1 Connectors field attachable 360 Shielding Screw termination Female connector axial Rated voltage [V] Current rating [A] Outer ø cable [mm] Wire cross section min-max [mm²] Description Part No ,5 SAL-8S-RKC3-S6, ,5 SAL-8S-RKC4-S6, Male connector axial ,5 SAL-8S-RSC3-S6, ,5 SAL-8S-RSC4-S6, Technical information starting on page 348
![M12x1 Connectors field attachable Screw termination Female connector axial Rated voltage [V] Current rating [A] Outer ø cable [mm] Wire](/docs-images/88/115405596/images/18-1.jpg "cross section min-max [mm²] Contact plating Description Part No.")
18 M12x1 Connectors field attachable Screw termination Female connector axial Rated voltage [V] Current rating [A] Outer ø cable [mm] Wire cross section min-max [mm²] Contact plating Description Part No. SAL-12-RKC4-S CuSnZn SAL-12-RKC4-S /A SAL-12-RKC5-S CuSnZn SAL-12-RKC5-S /A A SAL-12-RKC8-S Female connector axial with stainless steel coupling nut SAL-12-RKCE4-S SAL-12-RKCE5-S A SAL-12-RKCE8-S Technical information starting on page
19 M12x1 Connectors field attachable Screw termination Female connector angled Rated voltage [V] Current rating [A] Outer ø cable [mm] Wire cross section min-max [mm²] Contact plating Description Part No. SAL-12-RKWC4-S CuSnZn SAL-12-RKWCE4-S A SAL-12-RKWC5-S CuSnZn SAL-12-RKWC5-S /A A SAL-12-RKWC8-S Female connector angled with stainless steel coupling nut SAL-12-RKWCE4-S SAL-12-RKWCE5-S A SAL-12-RKWCE8-S Technical information starting on page 348
![M12x1 Connectors field attachable Screw termination Male connector axial Rated voltage [V] Current rating [A] Outer ø cable [mm] Wire](/docs-images/88/115405596/images/20-2.jpg "cross section min-max [mm²] Contact plating Description Part No.")
20 M12x1 Connectors field attachable Screw termination Male connector axial Rated voltage [V] Current rating [A] Outer ø cable [mm] Wire cross section min-max [mm²] Contact plating Description Part No. SAL-12-RSC4-S CuSnZn SAL-12-RSC4-S / A SAL-12-RSC5-S CuSnZn SAL-12-RSC5-S / A A SAL-12-RSC8-S Male connector axial with stainless steel coupling screw SAL-12-RSCE4-S SAL-12-RSCE5-S A SAL-12-RSCE8-S Technical information starting on page
![cross section min-max [mm²] Contact plating Description Part No.](/docs-images/88/115405596/images/21-1.jpg "SAL-12-RSWC4-S 43-00104 CuSnZn SAL-12-RSWCE4-S A5220 43-00278")
21 M12x1 Connectors field attachable Screw termination Male connector angled Rated voltage [V] Current rating [A] Outer ø cable [mm] Wire cross section min-max [mm²] Contact plating Description Part No. SAL-12-RSWC4-S CuSnZn SAL-12-RSWCE4-S A SAL-12-RSWC5-S CuSnZn SAL-12-RSWC5-S /A A SAL-12-RSWC8-S Male connector angled with stainless steel coupling screw SAL-12-RSWCE4-S SAL-12-RSWCE5-S A SAL-12-RSWCE8-S Technical information starting on page 348
![M12x1 Connectors field attachable 360 Shielding Screw termination Female connector axial Rated voltage [V] Current rating [A] Outer](/docs-images/88/115405596/images/22-1.jpg "ø cable [mm] Wire cross section min-max [mm²] Contact plating Description Part No.")
22 M12x1 Connectors field attachable 360 Shielding Screw termination Female connector axial Rated voltage [V] Current rating [A] Outer ø cable [mm] Wire cross section min-max [mm²] Contact plating Description Part No. SAL-12S-RKC4-S CuSnZn SAL-12S-RKC4-S /A SAL-12S-RKC5-S CuSnZn SAL-12S-RKC5-S /A A SAL-12S-RKC8-S Male connector axial SAL-12S-RSC4-S SAL-12S-RSC5-S A SAL-12S-RSC8-S Technical information starting on page
![M12x1 Connectors field attachable 360 Shielding Crimp termination Female connector axial Rated voltage [V] Current](/docs-images/88/115405596/images/23-1.jpg "rating [A] Outer ø cable [mm] Wire cross section min-max [mm²] Description Part No.")
23 M12x1 Connectors field attachable 360 Shielding Crimp termination Female connector axial Rated voltage [V] Current rating [A] Outer ø cable [mm] Wire cross section min-max [mm²] Description Part No. 4 A ,5-8,3 0,25-0,5 SAL-12S-RKC4-C A ,5-8,3 0,34-1,0 SAL-12S- RKC4-C/ Male connector axial 4 A ,5-8,3 0,25-0,5 SAL-12S-RSC4-C A ,5-8,3 0,34-1,0 SAL-12S- RSC4-C/ Technical information starting on page 348
![7/8" Connectors field attachable Screw termination Female connector axial Rated voltage [V] Current rating [A] Outer ø cable [mm] Wire](/docs-images/88/115405596/images/24-1.jpg "cross section min-max [mm²] Description Part No.")
24 7/8" Connectors field attachable Screw termination Female connector axial Rated voltage [V] Current rating [A] Outer ø cable [mm] Wire cross section min-max [mm²] Description Part No. 2+PE ,5-1,5 SAL-7 8-RKC2PE-S ,5-1,5 SAL-7 8-RKC4-S PE ,5-1,5 SAL-7 8-RKC4PE-S Male connector axial 2+PE ,5-1,5 SAL-7 8-RSC2PE-S ,5-1,5 SAL-7 8-RSC4-S PE ,5-1,5 SAL-7 8-RSC4PE-S Technical information starting on page
![M23 Connectors field attachable Solder termination Female connector axial Rated voltage [V] Current rating [A] Outer ø cable [mm] Wire cross section min-max [mm²] Cable length [m] Description Part No.](/docs-images/88/115405596/images/25-2.jpg "16+3 100 10/8 3-17 Signal max. 0,5 mm 2 Power max. 1,0 mm 2 SAL-23-RKC16+3-L 41-90001 Crimp termination Female connector axial 8+3 100 10/8 3-17 Signal max. 0,5 mm 2 Power max. 1,0 mm 2 SAL-23- RKC16.")
25 M23 Connectors field attachable Solder termination Female connector axial Rated voltage [V] Current rating [A] Outer ø cable [mm] Wire cross section min-max [mm²] Cable length [m] Description Part No / Signal max. 0,5 mm 2 Power max. 1,0 mm 2 SAL-23-RKC16+3-L Crimp termination Female connector axial / Signal max. 0,5 mm 2 Power max. 1,0 mm 2 SAL-23- RKC C / Signal max. 0,5 mm 2 Power max. 1,0 mm 2 SAL-23-RKC16+3-C With cable Female connector axial, TPU UL, halogenfree, black, Li9Y11Y /8 3 x 1² + 8 x 0,34² 5 10 SAL-23- RKC K1 SAL-23- RKC K /8 3 x 1² + 16 x 0,34² 5 10 SAL-23- RKC K1 SAL-23- RKC K Technical information starting on page 348
![Rund24 Connectors field attachable Screw termination Female connector axial Rated voltage [V] Current rating [A]](/docs-images/88/115405596/images/26-1.jpg "Outer ø cable [mm] Wire cross section min-max [mm²] Description Part No.")
26 Rund24 Connectors field attachable Screw termination Female connector axial Rated voltage [V] Current rating [A] Outer ø cable [mm] Wire cross section min-max [mm²] Description Part No. 3+PE ,5-1,5 SAL-24-RKC3PE-S PE ,5-1,5 SAL-24-RKC6PE-S Male connector axial 3+PE ,5-1,5 SAL-24-RSC3PE-S PE ,5-1,5 SAK-24-RSC6PE-S Technical information starting on page
Industrial Ethernet Panel-Mount Adaptors for PROFINET or EtherNet/IP Applications
Industrial Ethernet Panel-Mount Adaptors for PROFINET or EtherNet/IP Applications Type 0981 ENC 100 RJ45/M12 adaptor, female receptacle connector M12, D coding, chassis side thread PG 9, RJ45 female connector,
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
EPIC Circular Connectors CIRCON M23 Series
The M3 connectors have many inherent features which offer application advantages and provide significant benefits for the customer. These features make it one of the most application friendly connectors
Quick Selection Guide
Quick Selection Guide Signal Connectors M23 Coupling ayonet Coupling CONINVERS Edition 03/02 Signal Connectors M23 ayonet Quick Selection Guide Edition 03/02 Number of Contacts (View: mating face) Contact
Han PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module
Han termination Contents Page Han-Fast Lock... 20.11 adapter for Han DD... 20.13 adapter for Han DDD module... 20.16 adapter for Han 40 A Axial module... 20.18 adapter for Han E... 20.20 adapter for Han
M23 Connectors and cables
Contents Product Description: SAI M23 Connectors.2 Contact assignment.7 Technical data.8 Overview.10 M23 connector for signal transmission.12 M23 connector for power transmission.18 Moulded M23 cables.22
Datasheet. Datasheet-No Type: RS(W)T(S) - RK(W)T(S) -.../ M. Page: 1 of 7
The information/details in this datasheet merely contain general descriptions or performance factors which, when applied in an actual situation, do not always correspond with the described form, and may
MDT 2000 Magnetostrictive linear position transducer
Description MDT 2000 is a magnetostrictive linear displacement transducer. The position value is obtained by measuring the flight time elapsed between an electrical pulse, sent in a special waveguide,
07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
EPIC LS1 Series Circular Power & Mixed Power Connectors
EPIC LS1 Series Circular Power & Mixed Power Connectors EPIC LS1 Circular and Mixed Power Connectors are designed to DIN specification EN61984 and have a standard M23 threaded connection housing. They
CONNECTORS AGRICULTURAL & CONSTRUCTION MACHINES. Technology in connectors
CONNECTORS AGRICULTURAL & CONSTRUCTION MACHINES Technology in connectors CONEC Technology in connectors Industry 4.0, the current trend of increasing automation and data exchange in manufacturing environments,
fischer connectors 4032 Series HIGH-PERFORMANCE IN A VERSATILE PACKAGE MEDICAL PORTABLE EQUIPMENT DATA ACQUISITION INSTRUMENTATION Edition 1.
fischer connectors 4032 Series Plastic connectors Edition 1.2 MEDICAL PORTABLE EQUIPMENT DATA ACQUISITION HIGH-PERFORMANCE IN A VERSATILE PACKAGE INSTRUMENTATION PERFECT PACKAGE www.fischerconnectors.com
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
Ø 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5
Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70
Key features: M5 Series. Buccaneer. Full Contact Diagrams Page 120
The most compact connector type in the MSeries range, Bulgin s waterproof M5 sensor connectors come in straight and angled forms with or overmolded cable option s and a variety of panel mount receptacles.
Applications
Han PCB adapter Contents Page Technical characteristics PCB adapter for Han DD... 20.02 Han DD Inserts with PCB adapter... 20.03 Technical characteristics PCB adapter for Han E... 20.04 Han E Inserts with
Han-Brid. Contents Han-Brid Features Han-Brid Data interfaces Han-Brid Overview Han-Brid Cu
Contents Page Features... 19.02 Data interfaces... 19.03 Overview... 19.04 Cu... 19.06 F.O.... 19.08 Quintax 3 A... 19.10 RJ45 C... 19.12 USB / FireWire... 19.14 Han 4 A SC... 19.16 Hoods/Housings... 19.18
Data sheet... OMNIMATE Power - series BL/SL 7.62HP BLZ 7.62HP/04/180LR SN BK BX
Power on board #96 100% safety, 100% integration, 100% cost-effectiveness: The compact and efficient solution for UL-600V applications in the lower performance range (up to 12 kva). 29 A at 400V (IEC)
Miniature Push-Pull Series Atto Miniature Push-Pull
J Miniature Push-Pull Series Atto Miniature Push-Pull Technical Data Panel connector Cable connector Coupler connector Panel connector, cable connector and coupler connector circular housing Locking Push-Pull,
Han R 23. Circular Connector. Certified acc. to DIN EN ISO 9001 in design/ development, production, installation and servicing.
Circular Connector Certified acc to DIN EN ISO 9001 in design/ development, production, installation and servicing Data Sheet 0039-4 Circular Connectors Features Size R 23 Outer diameter 26 mm High contact
FISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
M12 connector D-coding M12 connector X-coding RJ45 IP20 connector PushPull RJ45 IP65 / IP67 connector
M12 connectors Directory Chapter Page General information....02 M12 connector D-coding....06 M12 connector X-coding....20 RJ45 IP20 connector....27 PushPull RJ45 IP65 / IP67 connector....46 Han 3 A RJ45
26-polige. Contacts Signalsteckverbinder. Circular Connectors
26-polige Contacts Signalsteckverbinder Circular Connectors 41 Ordering information 26 CONTCTS signal circular connectors ll standard connectors are published in this catalog. However, this catalog does
Key features: M8 Series BUCCANEER. Full Contact Diagrams Page 130
UCCNEER ulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory
EN3 SERIES WEATHERTIGHT CONNECTORS NEW PRODUCT BULLETIN 602
FEATURES & BENEFITS Sealed to IP68 NEMA 250 (6P) Patented grommet & o-ring free design Available in ribbed or winged coupling ring Cable, panel & cable to cable options Gold plated contacts standard Solder,
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
Standard Series Standard
Standard Series Standard Technical Data Coupler connector, cable connector and coupler connector rectangular housing Locking screw connection Protection IP 50 to IP 54 with conexil in the housing, flat-gasket
VARIOSUB D-SUB 25 Contact Inserts, Sleeve Housings
Contact Inserts, Sleeve Housings Introduction VARIOSUB is a range of plug connectors specially designed for signal and data technology in an industrial environment with high degrees of protection, temperatures
revos revos Industrial Multipole Connectors
revos revos Industrial Multipole Connectors Catalog 2018 revos MINI Plant II, Rodezstraße in Bamberg Company headquarters in Bamberg STOCKO main plant in Wuppertal Solutions for Building technology AT
SAC-5P-MS/ 1,0-920/FS SCO
Extract from the online catalog SAC-5P-MS/ 1,0-920/FS SCO Order No.: 1518274 Bus system cable, DeviceNet/CANOpen, 5 pos., PUR halogen-free violet, shielded, straight M12 SPEEDCON connector on straight
Product Overview Automation
EN DE Product Overview Automation Automation at a glance Ident Systems CIS3 CIS3A CIS3A - Mini Read system Read/write system Read system Read/write system Read system Read/write system Head Evaluation
CC-Link. Simple communication programming - configuration software available but not required
(Control & Communication Link) is a field network system that processes control and information data at high speed while ensuring a deterministic response. Features include: Simple communication programming
Male header, 100% protected against mismating, (1 x 1) mm straight solder pins Pin spacing 3.5 mm 3.81 mm. light gray <_ 8,5_> 3,5 1x1 <_ 9,3_>
96 Male Headers with Solder Pins; Double-Deck Male Headers with Solder Pins, Pin Spacing 3.5 mm and 3.81 mm 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5 kv/ 300 V, 10 A U 10 A 300 V, 10 A 160 V/.5
Connector System for Circular Contacts
Connector System for Circular Contacts Introduction The diameter 1.5 mm and diameter 2.5 mm Connector System is designed for electronic and electrical applications in motor vehicles. It fullfils all requirements
D-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
BKS. Contents Connectors and accessories. Micropulse Transducers
Contents and accessories KS. Connector overview KS. for nalog, Pulse and SSI KS.4 and accessories for CNopen and DeviceNet KS.6 and accessories for PROFIUS-DP interface KS.8 for Profile series KS for nalog,
ODU DOCK and ODU ROB. Connectors for Docking and Robot Systems.
and ODU ROB Connectors for Docking and Robot Systems Robust Circular Connectors and ROB Applications Industrial robots Tool change and depot systems Cable connections for robot systems Test equipment Features
picofast 4 - Branch Molded Junctions, Standard Wiring
picofast 4 - Branch Molded Junctions, Standard Wiring Combine 4 Sensors into One Cable Tough Polyurethane Construction For 3-wire DC Sensors or Switches Application Specifications Wiring Diagram Housing
NOVOHALL Rotary Sensor non-contacting. Series RSX-7900
NOVOHALL Rotary Sensor non-contacting Series RSX-7900 Special features very robust design to extreme environmental conditions high shaft load 300 N non-contacting, magnetic measuring angles up to 360 in
Ø 36 Ø 34 Ø 3,5 Ø 3,5
HEC English version locking system, 8 and contacts Degree of protection IP68/IP69K Crimp termination Diameter 6 mm VDE-, UL-approval Designed for harsh environments Description Male cable connector Drawing
SACB-8/16-L-C GG SCO. Extract from the online catalog. Order No.:
Extract from the online catalog SACB-8/16-L-C GG SCO Order No.: 1516771 Sensor/actuator box header, Connection method: M12-SPEEDCONsocket, Number of slots: 8, Number of positions: 5, Slot assignment: Double,
Duct Sensors. Building Technologies HVAC Products. Symaro. for relative humidity and temperature with calibration certificates
1 883 1883P01 1883P02 QFM4160 AQF4150 Symaro Duct Sensors for relative humidity and temperature with calibration certificates QFM41 Operating voltage AC 24 V / DC 1353 Signal output DC 010 V / 420 ma for
M12x1 Circular Connectors
M12x1 Circular Connectors Agenda 1. Introduction M12x1 Circular Connectors 2. M12x1 X-coded 3. M12x1 D-coded 4. Accessories and Nomenclature 3 / 2015 Product Presentation M12x1 Page 2 M12x1 Circular Connectors
IP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc.
v1.0 JL10 Series Circular Waterproof Connector Connector Training Module Copyright 2015 JAE Electronics, Inc. JAE JL10 Series Circular Waterproof Connector Application Examples Industrial machineries Servo
09. DIN Connectors
. Connectors Connectors that comply with have been in use for years for both board-to-board applications and cable-to-board applications. Their robustness and universality are legendary. The classic signal
SN Series - Part Numbering
SN Series - Part Numbering Features Push-pull technology Miniature circular Light weight Low cost Applications Professional audio and video CCTV system Portable wireless radio Factory Automation Computers
Better all-round. DataVoice Circular connectors STX M12x1 IP67 Connector series for industrial applications. PoE+ 10 GBE. coded.
Better all-round. X coded D coded 10 GBE PoE+ DataVoice Circular connectors STX M12x1 IP67 Connector series for industrial applications STX M12x1 IP67 connector series With the STX M12x1 IP67 connector
Item No.: /
mounting adapter also for DIN 35 rail; % protected against mismating; Plate thickness 06x12 mm; Male connector; with snap-in mounting foot; 4-pole; pin spacing 35 mm / 0138 in; with 209-137 mounting adapter
Powermate Range pitch 10.16
Contents owermate Range pitch.16 owermate Range pitch.16 owermate Range pitch.16 Male connectors with solder connection.2 Socket connectors with clamping yoke connection.8.1 owermate Range pitch.16 SU.16/9
Modular Connector System with High Power, Signal, Fibre-Optic, Coaxial Contacts and Pneumatic Valves
Modular Connector System with High Power, Signal, Fibre-Optic, Coaxial Contacts and Pneumatic Valves 2 rue René Laennec 51500 Taissy France Fax: 03 26 85 19 08, Tel : 03 26 82 49 29 E-mail:hvssystem@hvssystem.com
series Subminiature snap-action switches
Rocker switches Product features Small, efficient snap-action switches up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator
ODU MINI-SNAP PC Product Description. ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic
ODU MINI-SNAP PC Product Description ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic Cylindrical Connectors are generally available with several locking mechanisms: The most frequently
SAFETY EQUIPMENT EARTHING AND SHORT-CIRCUITING DEVICES angled, ball Ø20 or 25 mm EN/IEC (DIN VDE 0683 Part 100) and DIN Part 1
Points Installation Storage Phase and Earthing Points ball points, straight and angled, ball Ø20 or 25 mm EN/IEC 61230 (DIN VDE 0683 Part 100) and DIN 48088 Part 1 Suitable for fixing cable lugs or connecting
Directory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch
F Directory chapter 05 D-Sub Filter subminiature D connectors, 2.54 mm pitch New Page General information.............................................. 05.02 Technical characteristics..........................................
SBE 80 / SBO 60 Connectors - up to 80 Amps
Connectors - up to 80 Amps SBE and SBO connectors build on the capability of the two pole SB connectors by offering up to 8 auxiliary power / signal contacts along with an IEC 60950 touch safe housing.
IEEE 1394 Connector. Range Overview IP Receptacle to Overmolded with Cable In Line. Accessories. IEEE 1394 Connector I Range Overview
Amphenol TW Innovation in Waterproof Solution CATAOGUE http://www.amphenolltw.com IEEE 1394 Connector I Range Overview IEEE 1394 Connector IP 67. 68 Unmated or Mated 9 Range Overview to In ine Accessories
Technical data: Pin Spacing
282 Female Connectors, Double-Row Pin Spacing: 3.5 mm Universal connection for all conductor types Unique, compact, double-row connector system for conductor cross sections up to 1.5 mm 2 High-density,
PLUG&SOCKET CONNECTOR WITH CABLE CLAMP IP68
TH370 PLUG&SOCKET CONNECTOR WITH CABLE CLAMP IP68 Give the creativity of your project the space it deserves MADE IN ITALY High-reliability electrical connections www.techno.it The right solution to capture
Details of the Han-Terminal block connector Han D AV Han D AV Distributor Han E AV Han ES AV
Contents -Terminal Block Connectors Page Details of the -Terminal block connector........................ 08.02 D................................................... 08.10 D Distributor...........................................
Right angle press-fit D-Sub connectors
Right angle press-fit D-Sub connectors Version in Standard and in Eurostyle General The new generation of right angle D-Sub connectors with press-fit termination of the TMC series are according to DIN
USB Buccaneer BUCCANEER
Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling USB adaptor Sealing Cap Clip Standard USB O ring maintains IP68 seal at interface Panel gasket
High-density multi-pin connectors
High-density multi-pin connectors Mating and mounting conditions to DIN 41612/IEC 60603-2 General With the ever increasing miniaturization and higher packaging densities in highly integrated circuits there
Rotary Measurement Technology Absolute Encoders, Singleturn
-40 to 80 C IP Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
Temperature Switches
ETS 00 Series Temperature Switch for Inline and Tank Mounting Applications Description The ETS 00 is a compact electronic temperature switch with 4-digit digital display. Pressure resistant to 8700 psi,
M12 Field Wireable Connectors. M12 CAT.6A Field Wireable Connectors. M12 Field Wireable Connectors for PROFINET
M12 Connectors Application Advantage Shielded design ETHERLINE Ethernet Cable, Connectors & Tools M12 Field Wireable Connectors Male Female Temperature Range: Max. 85 C Nominal Voltage: Nominal Current:
Non-Contact Safety System CES-AZ
, 0 M 8 8,, 7,,,, 0 0 7 0 7 Mounting plate CEM For read head CEM-A-LE0... and actuator CEM-A-BE0... Material stainless steel Mounting plate EMP-L-CEM0 For read head CEM-A-LE0... 9 8 0 8 M - x, 7 Mounting
Supplementary instructions. Plug connector Harting HAN 8D. for continuously measuring sensors. Document ID: 30376
Supplementary instructions Plug connector Harting HAN 8D for continuously measuring sensors Document ID: 30376 Contents Contents 1 For your safety 1.1 Appropriate use... 3 1.2 Impermissible use... 3 1.3
400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated IP69K, Tested in accordance with DIN 40050/Part 9 IP6k9k USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof
HARTING News 2007
98 42 914 0201 HARTING News 2007 People Power Partnership Quality Connections Worldwide HARTING was founded in 1945 by the family that still owns the company. Its headquarters are situated in Espelkamp,
09. DIN CONNECTORS
. 41 612 CONNECTORS Connectors that comply with 41 612 have been in use for years for both board-to-board applications and cable-to-board applications. Their robustness and universality are legendary.
Room sensors QFA4160 QFA41 D AQF4150 AQF3153. Symaro. for relative humidity and temperature with calibration certificates
1 859 1859P01 1859P02 1859P04 QFA4160 QFA41 D AQF4150 AQF3153 Symaro Room sensors for relative humidity and temperature with calibration certificates QFA41 Operating voltage AC 24 V / DC 13.5...3 Signal
ULTRA-RESISTANT STERILIZABLE EASY TO HANDLE KEY FEATURES
B7 CHAPTER FISCHER CORE SERIES ULTRA-RESISTANT STERILIABLE EASY TO HANDLE KEY FEATURES IP68 or hermetic Nuclear decontamination fluids compatible Easy to handle with gloves or remotely B7-1 Table of contents
Catalog C-035 Rev. C
Catalog C-035 Rev. C P O S I T R O N I C I N D U S T R I E S Today, some customer applications have requirements for high bandwidth transfer between VMEbus cards. Requirements which even the most updated
Rotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
M 12 POWER THE COMPACT AND POWERFUL M 12 CONNECTOR
M 12 POWER THE COMPACT AND POWERFUL M 12 CONNECTOR 2 HUMMEL smart & reliable HUMMEL AG is a renowned manufacturer of connection technology and components for electric, electronic and heating areas. The
Item No.: /
Angled female connector; with snap-in mounting foot; 3-pole; pin spacing 5 mm / 097 in; 00% protected against mismating; for panel mounting; Plate thickness 06x2 mm; Fixing holes 35 mm Ø Item Angled female
Non-Contact Safety System CES-AZ
Read head CES-A-LSP-... Optimized for aluminum profile mounting LED for the indication of the door position Read head CES-A-LSP-... M plug connector, 3-pin or hard-wire encapsulated cable 8,3 3,3 Mounting
Seriplex. System throughput time is 0.4 msec for 32 sensors plus 32 actuators (5 msec for 510 I/O)
TURCK Network Media Products Seriplex Seriplex is designed to be easy and simple to use where applications demand a very high speed. Response times are less than a millisecond for 128 points. Cable runs
Rotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
Mating connectors and cable sets for valves and sensors in hydraulics
s and cable sets for valves and sensors in hydraulics RE 08006 Edition: 06-04 Replaces: 0. Features s and cable sets for electrical connection of: - Valve solenoids - Valves with integrated electronics
Male connector; 6-pole; pin spacing 3.5 mm / in; 100% protected against mismating
Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Item Male connector; 6-pole; pin spacing 35 mm / 0138 in; % protected against mismating Marking Business data Supplier
Series PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
CMC Hybrid Connectors Standard and Power Versions
The Molex family of provides a sealed, high-density, modular and cost-effective connection system for heavy-duty, powertrain and body-electronics applications in the transportation industry The CMC connector
IDC Assembly (depends on cable) -55/125 C. IDC Assembly (depends on cable) By ambient temperature: 20 C 1,2 A 70 C 0,9 A 100 C 0,6 A
mm Connectors Surface Mount Technology, Solderless Pressfit, IDC Electrical And Mechanical Characteristics Number of Pins Technical data Climate Category Bearing and operating temperature area Current
Technical Data, 4-way High Voltage. Cannon APD / ISO Connectors. Electrical Data. Mechanical Data. Materials List
Technical Data, 4-way High Voltage APD 4-way connectors are the original DIN72585 (now ISO 15170) versions using a 2,5 mm contact system. Designed for automotive applications they also meet the requirements
Incremental encoders Solid shaft with EURO flange B pulses per revolution
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse Features Size ø58 mm Precise optical sensing Output signal level TTL or HTL EURO flange B Connection axial,
Transforming customer wishes into concrete solutions
HARTING News 2013 HARTING worldwide Introduction Transforming customer wishes into concrete solutions The HARTING Technology Group is skilled in the fields of electrical, electronic and optical connection,
ORDERING INFORMATION: P/N 5 2 M D - x x M x HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD C0201
HALF PITCH (1.27MM) D-SUB. IDC TYPE CABLE MALE CONNECTOR WITHOUT HOOD Cover & Holder: Plastic Thermoplastic UL94V-0, P.B.T. UL94V-0, Black A B C D 20 20.20 15.80 9.30 15.00 26 24.00 19.65 9.30 15.00 36
ODU MAC LC. Modular Attachable Connector System
Catalogue No. 1004 LC-a ODU MAC LC Modular Attachable Connector System ODU Steckverbindungssysteme GmbH & Co. KG, Pregelstr. 11, 84453 Mühldorf a. Inn, Germany Phone: +49/ 86 31/61 56-0, Fax: +49/ 86 31/61
Extract from new. Device Connectivity catalogue. HARTING har-flex. People Power Partnership
Extract from new Device Connectivity catalogue HARTING har-flex People Power Partnership . har-flex CONNECTORS The continuous scalability by an even number of contacts, i.e. from 6 to 100, of the HARTING
02. PushPull CONNECTORS
. CONNECTORS A distributed automation system does not contain any central automated control cabinets. Controls, sensors and actuators are designed for a high degree of protection (IP 65 / IP 67) and are
AMPMODU* MOD I Interconnection System
Product Specification AMPMODU* MOD I Interconnection System 03 JUN 2013 Rev E All Paragraphs Revised 1. SCOPE This specification covers performance and test requirements for the AMPMODU MOD I Interconnection
SMA Series. Specification. Description. Applications Civil & Military Telecommunication Instrumentation SMA SMA. Interface Mating Dimensions
Series Specification 50 ohm 0-18 GHZ connectors are adaptable to interconnection requirements of both systems and components. S-Conn offers a wide variety of cable connectors, receptacles, feed thrus,
BVS UR E Ordering code: BVS001H
BVS UR-3-101-E Ordering code: BVS001H Vision sensor BVS-E Universal PNP (2x) 1) Teach reference image, 2) Power, 3) Output 1 active, 4) Output 2 active, 5) Connection with PC, 6) Sharpness Characteristic
Connector series UIC 558 VE R115. F 120.en
Connector series UIC 558 VE R115 4 52 F 0.en UIC 558 VE series connector The connector complies with the requirements of UIC 558 VE (up to 1994: UIC 58 VE). It connects lines used for the: remote control
Terminals, Lugs, and Fasteners
Terminals, Lugs, and Fasteners East Penn cast terminals are manufactured with 100% recycled lead. Lead is recognized as the premium choice in battery cable terminals because of its maximum current carrying
Supplementary documentation Proline Promag 53
SD00146D/06/EN/14.14 71249504 Products Solutions Services Supplementary documentation Proline Promag 53 Data transmission via EtherNet/IP Connection to an EtherNet/IP network and integration into a control
Section 7: Contents. Section Item Pages. Connectors Thermocouple Power, Push-on and In-line MS Circular Power, High Voltage Coaxial
Section 7: Contents Section Item Pages 7.1 7.2 7.3 Connectors Thermocouple Power, Push-on and In-line MS Circular Power, High Voltage Coaxial Vacuum Connectors & Cable Assemblies Sub Type C & D BNC SMA
Round Water-resistant Connectors (M12) XS2
Round Water-resistant Connectors (M) XS Water- and Environment-resistive FA Connectors Save Wiring and Maintenance Effort Compact FA connectors satisfy IP67 requirements and ensure a 9V-0 fire retardant