HDMIE55 HDMI Extender over CAT5e/6. User Guide

Transcription

1 HDMIE55 HDMI Extender over CAT5e/6 User Guide

2 Thank you for purchasing this Antiference HDMI over CAT extender product. Please read the following instructions carefully and retain this manual for future reference. Important Safety Notice Please read the below safety instructions carefully before installation and operation: 1. Do not mix up the transmitter unit (TX) and the receiver unit (RX), IR blaster extension cable and IR receiver extention cable before installation. 2. Do not hot plug when the device is in working mode. 3. Use only the 5V DV PSU supplied. The warranty may be void if 3rd party power supplies are used with this device. 4. This HDMI Extender supports POE (power over Ethernet) so the receiver is powered from the transmitter so ensure the power supply to the transmitter only. Please note that this HDMI extender may not be used with an Ethernet switch.

3 Introduction This Antiference HDMIE55 extends HDMI signal between transmitter and receiver over CAT6 cable. It supports video signals up to 55m including embedded multi-channel audio and HDCP1.4. The built-in EDID management makes this product compatible with most TV sets/ displays and source devices. The advanced power design (PoC) means only the transmitter requires power so only a single power supply unit is supplied. In addition, the HDMIE55 supports bi-directional IR control enabling control of the source from the remote location or control of a TV or device from the source location. Features Supports HDMI1.4, HDCP1.4 compliant. Supports built-in EDID management for complete flexibility The transmission of 1080p@60Hz (max) signal is up to 55m. Supports bi-directional IR control. Supports PoC, the receiver is powered by the transmitter. Package Contents 1 x Transmitter (TX) 1 x Power Adaptor (5VDC 1A) 1 x IR Receiver (5V) 1 x Receiver (RX) 2 x Velcro Tape 1 x IR Transmitter (5V) 1 x User Manual

4 Panel Description Transmitter (TX) 1) CAT OUT: RJ45 connector with green & yellow indicators. Connect to receiver over CAT6 cable. The green indicator lights up when powered on. The yellow indicator lights up when transmitter and receiver are linked sucessfully. 2) IR IN: Connect the IR receiver. 3) IR OUT: Connect the IR transmitter to enable control of the source 4) DC 5V: Micro USB, connect the power supply adaptor. 5) HDMI IN: Connect to HDMI source. 6) HDMI OUT: HDMI loop output, connect to a local display. 7) RESET: Reboot. Receiver (RX) 1) CAT IN: RJ45 connector with green & yellow indicators. Connect to transmitter over CAT6 cable. 2) IR IN: Connect the IR receiver to enable control of the source. 3) IR OUT: Connect the IR transmitter. 4) HDMI OUT: Connect to HD display. 5) EQ SETTING: For shorter cable runs, the EQ setting may be required. Press the EQ button 3 to 6 times to optimize for the cable length used. Continue stepping through the settings until the image is stable.

5 Specifications Transmitter Receiver Input (1) HDMI (1) CAT6 Input Connector (1) 19-pin type-a female HDMI (1) RJ45 Output (1) HDMI; (1) CAT6 (1) HDMI Output Connector (1) 19-pin type-a female HDMI; (1) RJ45 (1) 19-pin type-a female HDMI Control (1) IR IN; (1) IR OUT (1) IR IN; (1) IR OUT Control Connector (2) 3.5mm mini jacks (2) 3.5mm mini jacks General Transmission Distance HDMI Standard EDID Management Power Supply Power Consumption Work Temperature 55m HDMI1.4, HDCP1.4 compliant Built-in EDID Input: 100VAC~240VAC, 50/60Hz; Output: 5VDC 1A 4W (Max) -10~55C Relative Humility 10%-90% Dimensions (W*H*D) 66mm x 16.8 mm x66 mm Weight Transmitter: 36g; Receiver: 38g;

6 Connection Diagram

7 Declaration of Conformity We, ANTIFERENCE LIMITED herewith declare that the HDMI extender kit complies with all essential requirements and any other applicable conditions set forth on directive 1999/05/CE. According to the WEEE (Waste Electrical and Electronic Equipment) EU Directive, do not dispose of this product as household waste or commercial waste. Waste Electrical and Electronic Equipment should be appropriately collected and recycled as required by practices established for your country. For information on recycling of this product, please contact your local authorities, your household waste disposal service or the shop where you purchased the product.