TOPIC LIGHT CO., LTD 魅影灯光设备有限公司 USER MANUAL. Professional Stage Lighting Laser show product

Transcription

1 TOPIC LIGHT CO., LTD 魅影灯光设备有限公司 USER MANUAL Professional Stage Lighting Laser show product

2 Thank you for purchasing DP1RGB. To optimize the performance of this product, prior to use, please read these operating instructions carefully to familiarize you with the basic operation of this unit. Please keep the manual in safe price for future reference. This unit has been tested at our factory before sending out to you, there is no assembly required. Once after received this product, please take and put carefully. And check cautiously that whether the product was damaged or not during the transportation. Checking Parts Please check if the following parts are included: 1 x Laser 1 x Power cable 1 x User manual Danger Laser Radiation! Avoid direct eye exposure! Laser radiation can cause eye damage or skin damage All protective measures for a safe operation of this laser must be applied. Installation 2

3 1. Please check the voltage whether is the same with the one showed on the equipment or not. 2. It must ask for the technical person and set the light safety when installation. And let the light beam at the suitable angle. 3. When install this equipment please make sure there's no flammable surfaces (decorated things, etc) within at least 2.5M and maintain minimum distance of 0.5M from the equipment to the walls. 4. Please make sure that there's no other equipment or decorating materials obstructed the exhaust fan and the vent-pipe. 5. Products should be install immobility. 6. In case of safety, it's very important that to connect the earth with line. Attention 1. Please do not open the bottom cover yourself without permission. Operate it accord the user manual. Call the technician when the machine breaks down. 2. Please do not see the laser beam directly to avoid any damage. 3. Before connect or disconnect the power, please adjust the luminance of the laser diode to the least to avoid any damage to the laser diode. 4. This unit should be keep dry, do not use in the rain and dusty environment. It can be use in the outdoor with the water-proof cover protector. 5. Set the light immobility and try to avoid strong shake or hit. 6. Prevent dust into the equipment to avoid problems. 3

4 7. Please keep that there's no other equipment or decorating materials obstructed the exhaust fan and the vent-pipe when the equipment was working. 8. Before connect power, check the plug is immobility or not, power line should be connected well. 9. Please do not open or close the equipment frequently that's to avoid any affect to the life span of the laser diode, and try the best to avoid the long time working. 10. Due to the characteristic of the laser diode, after four hours working, it should be close at least 25 minutes until the laser diode cooling then work again. 11. Don't touch the light or draw the power line when your hand was wet. And do not pull the electronic power line. 12. Maintain the distance at least 3M above from the equipment to the object. 13. This equipment does not have any parts can repair for the users, please do not open the equipment. 14. When the laser diode became dim or damaged please contact the dealer timely. 15. When you want to retransfer the products, you'd better use the original package to shockproof. 4

5 LED setting: Mode LED DIPLAY 1 MUSIC 2 AUTOMATIC 3 DMX512 control 4 scanner or color 5 SET function 6 Restore Default 1. DMX Setting: Input dmx singal, and link the dmx controller and the lights by the control line as the following picture, you can control the lights by the controller. 5

6 1. Master-slave setting: Link the lights as the following picture (the light which does not receive signal, only output signal, will be the master light) LED display panel, as following: ENTER Exit 8888 UP DOWN 1. Touch keys and LED menu display, menu operation is simple and easy to use. 2. After loading the software to display the software version(so10) 3. Through the UP and DOWN buttons to select the need of function 4. Determined by the selected function ENTER and Exit button, return to the higher level menu Before using pleas check power supply link with earth wire correctly or not. The specification of the front and rear panel: 1. Power input to the socket 2. Power switch button 3. Laser safety switch lock 6

7 4. LED display 5. DMX IN/ DMX OUT:DMX signal output and input 6. When the ILDA interface connected to the exterior console, light will automatic change to exterior control mode, and needn't to convert switch. 7. Min-Max:Volume and sensitivity adjustment 8. MIC:microphone LE Technical Specifications 1. Power Supply: AC100~240V 50/60Hz 2. Rated Power: <500W 3. Laser color: Red/Green/Blue 4. Working Mode: Sound/Auto/DMX512/Master-Slave/ILDA 7

8 5. DMX Control Channels: 12CH 6. Modulation: TTL 7. N.W/G.W: 2.9/3.3kg 8. Pack Size:35x26x20CM LED function menu setting: 8

9 1 Choose DMX512 function: By UP\DOWN keys to select A001, press ENTER button to enter the DMX-512 function, at meantime through UP\DOWN Keys to set the address code 001, 013, 512, press EXIT to return. 2 Choose AUTOMATIC function: By UP, DOWN button to select AUTO, Press ENTER button to enter the AUTO function, at meantime through UP, DOWN keys to select self-propelled effect AU01, AU02, AU03, etc., press EXIT to return. 3 Choose music function: By UP, DOWN keys to select SODU, Press ENTER button to enter the voice function, through UP, DOWN keys to select Sound effects SO01, SO02, SO03, etc., press EXIT to return. 4 Choose test function: By UP, DOWN button to select TEST, press ENTER button to enter TEST. By UP, DOWN to select INVE, COLO function, press EXIT to return. INVE to set scanner X Y axis invert: By UP, DOWN to select INVE, press ENTER button to INO1, by UP, DOWN to select INO1(X,Y axis no invert), INO2(X axis invert), 9

10 INO3(Y axis invert), INO4(X,Y axis invert), press EXIT to return. COLO setting the light of color models: By UP, DOWN keys to select COLO, press ENTER button to enter the SO011, at meantime by UP, DOWN keys to select SO01-SO12, press EXIT to return, SO01 to SO07 is seven kinds of monochrome mode, SO08 is RGY, SO09 is RBP, SO10 is GBA, SO11 is RGB, SO12 is WYAP. 5 Choose SET function: By UP, DOWN keys to select SET, press ENTER to enter the setting function, through UP, DOWN keys SETA, SETB, SETC, SETD following functions, press EXIT to return. SETA set LED bright function: By UP, DOWN keys to select SETA, press ENTER button to enter, through UP, DO WN keys to select ON (display lit), 5S (display lights off after 5 seconds ), press EXIT to return. SETC set whether to open the host function: By UP, DOWN keys to select SETC, press ENTER button to enter, through UP, DO WN keys to select OFF (off the host), ON (open host), press EXIT to return 6 select Restore Default function By UP, DOWN keys to select DEFA, press ENTER button to enter the default function, by UP, DOWN keys YES (the default is restored), NO (do not restore the default) the functions of following, press EXIT 10

11 to return. DMX-512 Channel: 1. 12CH mode as following: Channel Channel Control Content value Laser light Laser light off 0~41 off Manual Control CH2-CH10 valid 42~83 CH1 auto trigger Running built-in beam effect 84~125 CH2-CH10 invalid Running built-in animation effect 126~167 CH2-CH10 invalid Running built-in beam effect 168~209 CH2-CH10 invalid Running built-in animation effect Music 210~251 CH2-CH10 invalid trigger Manual Control CH2-CH10 valid 252~255 CH2 CH3 Choose pattern Pattern Choose pattern 252~255 1~127 Rotation angle selection 128~191 reverse direction rotation speed 11

12 rotation selection 192~255 positive rotation speed selection CH4 Pattern flip horizontal CH5 Pattern flip vertical 0~127 Flip horizontal angle selection 128~255 Flip horizontal speed selection 1~127 Flip vertical angle selection 128~255 Flip vertical speed selection CH6 Pattern 0~127 Horizontal moving position selection horizontal 128~255 Horizontal moving speed selection moving CH7 Pattern 1~127 Vertical moving position selection vertical 224~255 Vertical moving speed selection moving Pattern size 0~63 Pattern size selection 64~127 Speed from fast to slow CH8 Pattern 128~191 Speed from slow to fast zoom 192~255 Zoom speed selection CH9 Pattern 0~255 Gradually drawing speed selection gradually drawing CH10 Scanner 1~127 Pattern scanner speed selection speed Point effect 128~255 Pattern point length selection 0~24 Fixed color selection 25~199 Color selection CH11 Color mode 200~224 Color change effect 225~255 Color flow change effect 12

13 CH12 Color 0~255 Color change speed from slow to speed fast Maintenance Maintenance should be performed every 15-day period, by using a sponge which is dipped with alcohol, rather than wet cloth or other chemical liquid, to clean the mirror. Always disconnect from the mains when the device is not in use or before cleaning it. Warning Power must be disconnected before maintenance or repair. Do not look at the light source directly Note Don't separate laser machine from laser power and repair them by yourself, otherwise no good repair service will be supplied. Declaration This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. 13

14 We cannot be made liable for damages caused by incorrect installations and unskilled operation! 14