Compose SYSTEM High-Efficiency Linear Asymmetrical LED Fixture for Indirect Illumination.

Transcription

1 FEATURES Plug-and-play design allows for any combination of 1, 1.5 and 4 foot modules to be installed for up to 100 from a single power feed. Luminaires can be installed in a variety of configurations: linearly, around corners, or in curved installations. Both inside and outside striation free corners are available in ranges of degrees for continuous lighting. Prefabricated cove mounting channel reduces installation time and cost, while keeping the small form factor. Easily connects to the building s power source ( VAC, 50 / 60 Hz) via entry cable provided. Strict 2-Step MacAdam Ellipse binning. Each fixture is photometrically tested and serialized for traceability. ELECTRICAL SPECIFICATIONS Input Voltage VAC, 50 / 60 Hz Input Power 2W - 12W Factory Programmable *2W - 4W Non-dimming Max. Load See Max Run/Feed Table Below. Startup/Operating: -20 C to +40 C Temperature Storage: -30 C to +60 C Relative Humidity: 10-90% (non-condensing) Dimming >5% via 0-10 VDC Life 60,000 hours to L70 PHYSICAL Extruded Aluminum Housing/ UV Stabilized Polycarbonate Lens. IP50 Rating Weight: 1Ft:.87lb, 1.5Ft:1.31lb, 4Ft: 3.48lbs. Corner Weight: 1.69lb PERFORMANCE POLAR PLOT 98.7 lm/w 83 CRI (90+ Available) 3000K LUMEN DATA LUMEN FACTOR MAX RUN/FEED System Delivered Output Factors Watts Max. Run Length Watts/Ft Lumens/Ft CCT Multiplier POWER 120VAC 277VAC 83 CRI 92 CRI 2 240Ft 270Ft 2700K Ft 270Ft 3000K Ft 270Ft K Ft 220Ft K Ft 180Ft K Ft 160Ft K Ft 120Ft K Ft 120Ft 10 45Ft 100Ft 11 45Ft 95Ft 12 40Ft 90Ft SPECIFICATION CODE BUILDER Series Power Color CRI Mounting Cable Geometry Orientation CP / 02W* 27K K S - Standard+82 SF - Surface Fixed Mount- SC - Straight S- Ft. IC - Inside Corner 03W* 30K K H - High92+ SA - Surface Adj. Mount- RT - Right Angle L- x Ft. OC - Outside Corner 04W* 35K K WF - Wall Mount Flat Front++ U- x x Ft. 05W 40K K GF - Gypsum Flat Front R- x Ft. CP Compose 06W 45K K K1 - Gypsum Knife Edge 30 0 C- Custom + 07W 50K K K2- Gypsum Knife Edge 40 0 Voltage Geometry Direction 08W 65K K WW - Wall Wash- 1V S-Straight 09W For Other Color Temperature Contact Factory. UF - Universal Mount- 2V L-L-Shape 10W AC - ACT U-U-Shape 11W R-Rectangle/Square 12W EXAMPLE: CP-03W-35K-S-GF-RT/1V-S-IC * Non-dimming +Contact Factory ++ -Specify Mounting Clip for Surface Mount, Wall Wash Mount and Universal Mount. Note: Surface Adjustable Mount NOT Compatible with corners. Page 1 of 7

2 LED MODULE DIMENSIONS 1.33 [34mm] 2.5 [64mm] Length A Cable connect to next fixture in run Extends up to 3.0 CORNER / LED MODULE PART CODES "A" Power Color CRI 12'' CP12 xxw xxk x 18'' CP18 xxw xxk x 48'' CP48 xxw xxk x Inside and Outside Pre-made Corners Available. Corner Angle ( 0 ) Power Color CRI Inside CPIC xxxd xxw xxk x Outside CPOC xxxd xxw xxk x 1.33 [34mm] Angle ( ): ranges between 45 & 179 Power: 02W, 03W, 04W, 05W, 06W, 07W, 08W, 09W, 10W, 11W, 12W Color: 27K, 30K, 35K, 40K, 45K, 50K, 65K CRI: H [High 92+], S [Standard 82+] CABLE OPTIONS Power Input Straight Cable: CP-PIC-S-120 CORNER MODULE OPTIONS Inside Corner Module: CPICxxxDxxWxxKx [12.8mm] 1.2 [32mm] 0.6 [17mm] [20mm] [12mm] 120 [3048mm] Power Input Right Angle Cable: CP-PIC-R-120 Outside Corner Module: CPOCxxxDxxWxxKx 0.6 [17mm] [12.8mm] 0.9 [24mm] 0.4 [12mm] 1.1 [30mm] 120 [3048mm] WIRING DIAGRAM INRUSH A 1.4A A 1.4A 4 6.3A 2.8A WIRE COLORS BLACK - Line WHITE - Neutral GREEN - Ground GRAY - Dimming (-) VIOLET - Dimming (+) Page 2 of 7

3 SURFACE MOUNT Surface Adj. Mount CP-CLP-AJ1 Surface Adj. Mount NOT compatible with corners. Surface Fixed Mount CP-CLP-FX1 MIN: 3 MIN: QUICKTRACK MOUNTING RAIL Surface Mount Track: CP-CLP-QT Quicktrack Mounting Rail included in shipment and required for all Surface Mounted options. 4' Max. Length ALUMINUM Field Cutable Hardware Supplied By Others. 48 [1220mm] 0.3 [8mm] 16.2 [411mm] 15.6 [396mm] 15.6 [396mm] 1.9 [48mm] 2.0 [56mm] [13mm] [13mm] Page 3 of 7

4 GYPSUM MUD-IN Flat Front 90 0 Extrusion CP-GF-EXT WALL MOUNT Wall Mount Flat Front CP-WF-EXT End Cap: CP-GF-END-L CP-GF-END-R End Cap: CP-WF-END-L CP-WF-END-R WALL MOUNT CORNERS Inside Corner CP-WF-IC-xxxD Outside Corner CP-WF-OC-xxxD WALL WALL Page 4 of 7

5 GYPSUM MUD-IN PROFILE OPTIONS Knife Edge 30 0 Extrusion CP-K1-EXT Knife Edge 40 0 Extrusion CP-K2-EXT End Cap: CP-K1-END-L CP-K1-END-R End Cap: CP-K2-END-L CP-K2-END-R GYPSUM MUD-IN CORNERS Inside Corner: CP-K1-IC-xxxD CP-K2-IC-xxxD CP-GF-IC-xxxD Outside Corner: CP-K1-OC-xxxD CP-K2-OC-xxxD CP-GF-OC-xxxD Page 5 of 7

6 WALL WASH MOUNT Wall Wash Extrusion CP-WW-EXT End Cap: CP-WW-END-L CP-WW-END-R MOUNTING CLIP Surface Adjustable Mount CP-CLP-AJ1 Surface Fixed Mount CP-CLP-FX1 VARIES WALL WASH CORNERS Inside Corner: CP-WW-IC-xxxD Outside Corner: CP-WW-OC-xxxD Page 6 of 7

7 UNIVERSAL MOUNT Universal Extrusion CP-UF-EXT End Cap: CP-UF-END-L CP-UF-END-R MOUNTING CLIP Surface Adj. Mount CP-CLP-AJ1 Surface Fixed Mount CP-CLP-FX1 PRELIMINARY VARIES PRELIMINARY UNIVERSAL MOUNT CORNERS Inside Corner: CP-UF-IC-xxxD Outside Corner: CP-UF-OC-xxxD Page 7 of 7