5 TEL: F-5,

Transcription

1 S 地址 : 台中市北區文心路四段 200 號 3 樓之 5 TEL: F-5, No.200., Sec.4,Wunsin Rd., North District, FAX: Taichung City 404, Taiwan (R.O.C) sales@vitek.com.tw WEB: SPECIFICATION MODULE NO -KBW-O6A VERSION CUSTOMER APPROVE Sale by Check by Prepare by VITEK DISPLAY CO., LTD 1 of 16

2 INDEX 1. OUTLINE DRAWING INTERFACE PIN FUNCTION PRECAUTION IN USE OF LCD MODULE GENERAL SPECIFICATION MECHANICAL DIMENSION CONTROLLER IC: ST7565P-G CONTROLLER TEMPERATURE RANGE ELECTRICAL CHARACTERISTICS ELECTRICAL ABSOLUTE MAXIMUM RATINGS BACKLIGHT INFORMATION SPECIFICATION ST7565P-G CONTROLLER DATA RELIABILITY CONTENT OF RELIABILITY TEST QUALITY ASSURANCE INSPECTION CONDITIONS INSPECTION PARAMETERS NUMBERING SYSTEM...15 VITEK DISPLAY CO., LTD 2 of 16

3 MODIFY RECORD NO. VER. DATE MODIFY REASON MODIFY CONTENTS 1 A 2007/12/04 New issued VITEK DISPLAY CO., LTD 3 of 16

4 1. Outline drawing VITEK Alex 2007/08/20 6 O'CLOCK VIEING DIRECTION mm 1/1 REV : A LCM DRAWING LCM A2 0.3±0.05 VITEK DISPLAY CO., LTD 4 of 16

5 2. Interface Pin Function Pin No. Symbol Level Description 1 CS1 L/H Chip select input pins(l-active) 2 CS2 L/H Chip select input pins(h-active) 3 RST L/H REST input pin(l-active) 4 A0 L/H Register select input pin 5 R/W L/H Read/Write input pin 6 E L/H Enable input pin 7 DB0 I/O Data BUS 8 DB1 I/O Data BUS 9 DB2 I/O Data BUS 10 DB3 I/O Data BUS 11 DB4 I/O Data BUS 12 DB5 I/O Data BUS 13 DB6 I/O Data BUS 14 DB7 I/O Data BUS 15 VDD +3.3V Supply Voltage for logic VDD 16 VSS 0V Supply Voltage for logic GND 17 VOUT I/O Voltage converter input/output 18 C3+ O Voltage booster circuit VITEK DISPLAY CO., LTD 5 of 16

6 Pin No. Symbol Level Description 19 C1- O Voltage booster circuit 20 C1+ O Voltage booster circuit 21 C2+ O Voltage booster circuit 22 C2- O Voltage booster circuit 23 C4+ O Voltage booster circuit 24 V4 I/O Voltage booster circuit 25 V3 I/O Voltage booster circuit 26 V2 I/O Voltage booster circuit 27 V1 I/O Voltage booster circuit 28 V0 I/O Voltage booster circuit 29 VR I V0 voltage adjustment pin 30 C86 I/O 6800(H)/ 8080(L) MCU select pin 31 P/S I/O Paraller(H)/Serial(L) Data input select pin 32 HPM I Power control pin 33 IRS I Internal resistor select 34 NC 35 NC 36 NC VITEK DISPLAY CO., LTD 6 of 16

7 3. Precaution in use of LCD Module (1) Avoid applying excessive shocks to the module or making any alterations or modifications to it. (2) Don t make extra holes on the printed circuit board, modify its shape or change the components of LCD module. (3) Don t disassemble the LCM. (4) Don t operate it above the absolute maximum rating. (5) Don t drop, bend or twist LCM. (6) Soldering: only to the I/O terminals. (7) Storage: please storage in anti-static electricity container and clean environment. (8) Don t touch the elastomer connecter, especially insert a backlight panel (EL or CCFL) 4. General Specification 4.1 Mechanical Dimension Item Dimension Unit Number of Dots 128 x 64 - Module dimension ( L x W x H ) 78.0 x x 5.3 (Max) mm View area x mm Active area x 30.7 mm Dot size 0.44 x 0.46 mm Dot pitch 0.46 x 0.48 mm 4.2 Controller IC: ST7565P-G controller 4.3 Temperature Range Wide temperature Operation temperature -20 ~ +70 Storage temperature -30 ~ + 80 VITEK DISPLAY CO., LTD 7 of 16

8 5. Electrical Characteristics Item Symbol Condition Min. Typ. Max. Unit Voltage For Logic Vdd-Vss V Supply Voltage For LCD *Wide Temp Type V0-Vss Input High Vol. V IH Vdd - Vdd V Input Low Vol. V IL - Vss Vdd V Output High Vol. V OH Vdd - Vdd V Output Low Vol. V OL - Vss Vdd V Supply Current(Logic) Idd Vdd=3V ma 5.1 Electrical Absolute Maximum Ratings - (Vss=0V, Ta=25 ) Item Symbol Min Max Unit Supply Voltage (Logic) Vdd V Supply Voltage (LCD driver) VLCD V Input Voltage VI -0.3 Vdd+0.3 V 70 VITEK DISPLAY CO., LTD 8 of 16

9 6. Backlight Information 6. 1 Specification LED white Parameter Symbol Min Typ Max Unit Test Condition Supply Current ILED ma V=3.0V Supply Voltage V V - Reverse Voltage VR V - Luminous Intensity IV cd/m 2 ILED=60mA Chromaticity X Y 0.31 ILED=60mA Life Time Hr. V 3.0V Color White The brightness average lifetime is up 20,000 hours under these conditions: (1) The environmental temperatures 25±2 (2) If=60 ma, Vf=3.0V VITEK DISPLAY CO., LTD 9 of 16

10 7. ST7565P-G Controller data Please check the attachment. VITEK DISPLAY CO., LTD 10 of 16

11 8. Reliability 8.1Content of Reliability Test Environmental Test No. Test Item Content of Test Test Condition High Temperature storage Low Temperature storage High Temperature Operation Low Temperature Operation High Temperature/ Humidity Storage High Temperature/ Humidity Operation Temperature Cycle Endurance test applying the high storage temperature for a long time. Endurance test applying the high storage temperature for a long time. Endurance test applying the electric stress (Voltage & Current) and the thermal stress to the element for a long time. Endurance test applying the electric stress under low temperature for a long time. Endurance test applying the high temperature and high humidity storage for a long time. Endurance test applying the electric stress (Voltage & Current) and temperature / humidity stress to the element for a long time. Endurance test applying the low and high temperature cycle min 5min 30min 60 / 96hrs hrs 50 96hrs 0 96hrs 60,90%RH 96hrs 40,90%RH 96hrs -20 /60 10 cycles Applicable Standard 8 Vibration test 9 Shock test 10 Atmospheric pressure test 11 Static electricity test 1 cycle Mechanical Test Endurance test applying the 10~22Hz 1.5mmp-p vibration during transportation and 22~500Hz 1.5G using. Total 0.5hrs Constructional and mechanical endurance test applying the shock during transportation. Endurance test applying the atmospheric pressure during transportation by air. Others Endurance test applying the electric stress to the terminal. 50G Half sign wave 11 msedc 3 times of each direction 115mbar 40hrs VS=800V,RS=1.5kΩ CS=100pF 1 time ***Supply voltage for logic system=3v. Supply voltage for LCD system =Operating voltage at 25 VITEK DISPLAY CO., LTD 11 of 16

12 9. Quality Assurance 9.1 Inspection conditions The LCD shall be inspected under 40W white fluorescent light. 45 Definition of applicable Zones B A LCD BEZEL PCB A : Display Area B : Non-DisplayArea VITEK DISPLAY CO., LTD 12 of 16

13 9.2 Inspection Parameters NO. Parameter Criteria 1 Black or White spots Zone Acceptable Number Dimension A B D<0.15 * * 0.15 D D D D=(Long + Short)/2 Class Of Defects *: Disregard Acceptable Level Minor Scratch, Substances Zone Acceptable Number X(mm) Y(mm) A B Class Of Defects Acceptable Level 3 Air Bubbles ( between glass & polarizer) * 0.04 * * W L W L W - 0.1<W 0 1 X: Length Y: Width *: Disregard Total defects should not exceed 4/module Zone Acceptable Number Class Of Dimension A B Defects D 0.15 * * 0.15<D * 0.25<D 0 1 *: Disregard Total defects shall not excess 3/module. Minor 2.5 Acceptable Level Minor 2.5 VITEK DISPLAY CO., LTD 13 of 16

14 (1)Pixel shape (with Dent ) (2)Pixel shape (with Projection) (3)Pin hole X 4. Uniformity Y (X +Y)/2 0.02mm (Less than 0.1mm is No counted) (4) Deformation X (X + Y)/2 0.3mm Y Total acceptable number: 1/pixel ;.5/cell VITEK DISPLAY CO., LTD 14 of 16

15 10.Numbering system V O K B W - O Brand Name V Vitek Display co., LTD 2. Display Type C Character Type G Graphic Type O COG S Segment Type 3. Number of Pixels Character Module Graphic Module Characters per line Lines Row Dots Column Dots 4. Series number 1-9 Series Number 5 LCD Polarize Normal Temperature Wide Temperature 6:00 12:00 6:00 12:00 Reflective A B C D Transflective E F G H Transmissive I J K L 6 LCD Mode: TN STN FSTN G Gray Positive P F Y Yellow/Green Negative N B Blue W. VITEK DISPLAY CO., LTD 15 of 16

16 7. Backlight None N None I White EL U Blue Green A Amber B Blue E Yellow/Green, edge LED G Green R Red W White Y Yellow/Green CCFL C White 8. IC font Character Cyrillic/English CC Japanese/English JC European/English RC, EC 8. Graphic X Without Negative Voltage V Negative Voltage T Temperature Compensation B Chinese BIG 5 G Chinese GB 9. Special code VITEK DISPLAY CO., LTD 16 of 16