MicroMVL Release History. Note: Changes in black mean new features or capabilities and red changes mean corrections from previous versions.

Transcription

1 MicroMVL Release History Note: Changes in black mean new features or capabilities and red changes mean corrections from previous versions. Version Release Date Changes May-2018 Fixed Audit Trail Reports Pollling Issue Nov-2016 Added Support for Downloader 7 Added Timestamp to Configuration Report Added Support for Mass Units Selection to Firmware version or later For firmware ver or later, maximum number of hourly reports is 336 Hours Jul-2014 Port 3 Read only is added Feb-2014 Floating Point Mode is added. Modbus Shift - Floating Point support is added. New Downloader ver.2.06 is added Aug-2013 "4 - AGA7" is changed to " 4 - Frequency" for all meters Mar-2013 Downloader version 2.05 is implemented. Ethernet communication is fixed. Autodetect issue is solved Aug-2010 Added SG and SC@60 in batch and daily reports Apr-2010 Corrected Density Pressure/Temperature assignments not being downloaded Aug-2009 Density/SG limits on tables data entry were increased Jul-2009 Addition of RTD Calibration in F and C in addition to Ohms Added new Autodetect Menu that can be cancelled by user Feb-2009 Support for systems with more than 10 serial ports Autodetect function can be now cancelled in the middle of the detection Dec-2008 Support for VenCone flow equation Support for Modbus Flow Direction Override on Bi-Directional Meters

2 Jun-2008 Support for new Audit Trail report in firmware version and newer Fixed rounding of last decimal place on implied decimal registers Hourly report showing total mass for meter 1 reverse with wrong decimals Batch report showing some meter 1 data when asking for meter 2 data Feb-2008 Audit Trail Reporting erroneous deminal places on cumulative values Nov-2007 Support for live density on new table 23/ Jul-2007 Added Flow Control Options for the Serial Communications (DTR, CTS, DTS) Jun-2007 Exporting configuration as text, it shows wrong base conditions Added engineering units on several data entry screens Mar-2007 Added 2004 API Tables and Reports Revised Security Codes Validation Oct-2006 Added Asphalt Density Table Added Ethernet Support for Modbus Driver Feb-2006 Extended Daily Historical Data from 32 to 35 Days Jan-2006 Added Status/Switch No.4 to I/O Configuration Corrected Program Variable Dialog not saving user input Nov-2005 Additional Analog Inputs (5 to 9) Added Jul-2005 Analog Output Decimal Places May-2005 Configuration window broken down in separate pages Feb-2005 Feature to disable Interval report printing if no flow Daylight Saving Time (DST) Multivariable Connection Status Add units to product data entries Last Month Report: Totals not averaged correctly & month always 00/2000 Hourly Full Report: Not Showing Meter 2 Mass Total Nov-2004 Added Brine Water Table Saves Meter Calibration in configuration file

3 Ability to disable Touch Screen Display BackLight can be controlled by time Oct-2004 Extended Water Base density High Limit from to 1.5 Changed Y Factor to None since liquids are non-compressible Extended Modbus Shift, Boolean and Program Variables Sep-2004 Removed Phase Direction Detection not supported by hardware Improved Modbus Driver (Saves last values used) Saves version of last computer online Clears Spare Registers before downloading Unified Online Flag Aug-2004 V-Cone Equation Added Modbus Driver uses automatic data type selection and stores previous values Override Meter Factor Added Densitometer Information added to configuration text report Forward Meter Factor for Meter 2 was disabled. Upgraded program variables to accept negative numbers Unable to get Audit Report from FC versions Modbus Driver was not reading floating registers (always showed zero) Feb-2004 Reorganized configuration upload/download to avoid time outs Added Modbus Driver Updated Status/Switch Output window Added End Batch question after downloading configuration Added window to inform user about computer reset when port config changes Moved snapshot report to historical data menu. Added Modbus Shift info in configuration report Fixed Problem with Desktop Icon not loading database location Not showing pure butadiene description Dropping characters from product description Unable to clear gravity override Oct-2003 Low and High Limits for Live Densitometer had wrong decimal places Sep-2003 Add Program Variable Statements Add 4th Slave Unit Add Slave Unit Update Flag Problem with decimal places in Analog output assignments Add New calibration windows for easier use.

4 Jul-2001 Corrected Reports - Was unable to show stored reports besides the last captured Jun-2003 Corrected Audit Report Mass Totals Corrected Reverse FWA Data Display Corrected Gravity Override Range Validation Added User Custom Report Jun-2003 Added Override and Fixed Values Indicators in Sys Snapshot Improved Image File Download including estimated time and progress indication Do Not Allow 0 as Modbus ID Ability to copy PC time to the flow computer time with a single button. Add Net and Mass Totals in Audit Report Mar-2003 RTD Value was not updating on Diagnostics screen Analog Output calibration sequence was incomplete PID Entries range validation from 0 to 9.9 Improved ModbusTCP Communications Added TCP/IP Encapsulation communication Added Multitasking Communications (More responsive comms) RTD alarm limits when used as Densitometer Temperature are now allowed Jan-2003 Unable to select M1 frequency input when M2 was using it even though Mtr Bank = 1 Density Configuration had misplaced decimal places when using API selection Added C++ Runtime Libraries for Old computers that do not have them integrated Nov-2002 Changed Crystal Reports Source Code and libraries for more reliable ones Added Switch Output Diagnostic Mode Fixed Crystal Reports Engine Issue - Unable to open report preview window Ability to End batch on both meters at the same time Corrected Full Calibration problem Added items 6,7,8,16,17 to Status input Assigment Sep-2002 Left Communications defaulted to Ethernet Unable to Edit Comm settings from a window diff. than Diagnostics Added App Tag on the About Box Aug-2002 Added Printer RTS selection for Port 2. Added ScrollBars to the MDI Frame Changed Security Codes Windows - More Easy to use Added Ethernet - Modbus/TCP Capability

5 Jul-2002 First Full Release Jun-2002 Start working in the Application Beta Testing Version