RTE Series Analog Timers. UL Listed File No. E kPa to 110kPa (Operating), 70kPa to 110kPa (Transport)

Size: px
Start display at page:

Download "RTE Series Analog Timers. UL Listed File No. E kPa to 110kPa (Operating), 70kPa to 110kPa (Transport)"

Transcription

1 Analog Key features of the RE series include: 0 time ranges and 0 timing functions ime delays up to 600 hours Space-saving package High repeat accuracy of ± 0.% ON and timing LED indicators Standard 8- or -pin and -blade termination form C delayed output contacts 0A Rating Cert. No. E (EMC, RE) cert. No. BL (LVD, RE) UL Listed File No. E66043 eneral Specifications System Solid state CMOS Circuit ype Multi-Mode ime Range 0.sec to 600 hours Pollution Degree (IE60664-) Over voltage category III (IE60664-) AF V AC(50/60Hz) Rated al AD4 4V AC(50/60Hz)/4V DC Voltage D V DC AF V AC(50/60Hz) Voltage olerance AD V AC(50/60Hz)/.6-6.4V DC D V DC Input off Voltage Rated Voltage x0% minimum Ambient Operating emperature -0 to +65ºC (without freezing) Ambient Storage and ransport emperature -30 to +75ºC (without freezing) Relative Humidity 35 to 85%RH (without condensation) Atmospheric Pressure 80kPa to 0kPa (Operating), 70kPa to 0kPa (ransport) Reset ime 00msec maximum Repeat Error ±0.%, ±0msec* Voltage Error ±0.%, ±0msec* emperature Error ±0.5%, ±0msec* Setting Error ±0% maximum Insulation Resistance 00MΩ minimum (500V DC) Between power and output terminals: 000V AC, minute Dielectric Strength Between contacts of different poles: 000V AC, minute Between contacts of the same pole:000v AC, minute Vibration Resistance 0 to 55Hz amplitude 0.5mm hours in each of 3 axes Operating extremes: 98m/sec (0) Shock Resistance Damage limits: 490m/sec (50) 3 times in each of 3 axes Degree of Protection IP40 (enclosure) (IEC6059) YPE RE-P, -B RE-P, -B Consumption (Approx.) AF0 0V AC/60Hz 6.5VA 6.6VA 40V AC/60Hz.6VA.6VA 4V AC 60Hz/DC 3.4VA/.7W 3.5VA/.7W D.6W.6W Free Mounting Position RE-P, P 40Hx 36W x 77.9D mm Dimensions RE-B, B 40Hx 36W x 74.9D mm RE-P RE-P RE-B, -B Weight (Approx.) 87g 89g 85g *For the value of the error against a preset time, whichever the largest. Ratings Form C, DPD Configuration (Delay output) Allowable Voltage / 40V AC, 30V DC / 0A Allowable Current Maximum Permissible 800 cycles per hour Operating Frequency Rated Load Life Resistive Inductive Horse Rating Electrical Mechanical 0A 40V AC, 30V DC 7A 40V AC, 30V DC /6 HP 0V AC, /3 HP 40V AC 500,000 op. minimum (Resistive) 50,000,000 op. minimum RE able of Contents Specifications -8 Part Number uide -9 Part Number List -9 RE iming Diagrams -0 RE Accessories - Instructions: Setting imer - RE Dimensions -3 eneral iming Diagrams USA: (800) 6-IDEC or (408) , Canada: (888) 37-IDEC

2 Part Numbering uide RE series part numbers are composed of 4 part number codes. When ordering a RE series part, select one code from each category. Example: RE-PAF0 RE P AF0 ➀ Series ➁ erminal Style ➂ Function roup ➃ Input Voltage Part Numbers: Description Part Number Code Remarks ➀ Series RE series RE For internal circuits, see next page. ➁ erminal Style ➂ Function roup ➃ Input Voltage Pin Blade ON-delay, interval, cycle OFF, cycle ON ON-delay, cycle OFF, cycle ON, signal ON/OFF delay, OFF-delay, one-shot 00 to 40V AC(50/60Hz) AF0 4V AC(50/60Hz)/4V DC AD4 V DC D P B Select one only. Each function group has different timing functions. See page -4. Part Number List Part Numbers riggered Input riggered Voltage 8-Pin Blade -Pin Blade V DC RE-PD RE-BD RE-PD RE-BD 4V AC/DC RE-PAD4 RE-BAD4 RE-PAD4 RE-BAD V AC RE-PAF0 RE-BAF0 RE-PAF0 RE-BAF0 ime Range able ime Range Determined by ime Range Selector & Dial Selector Dial Second 0. sec - sec 0. sec - 3 sec 0. sec - 0 sec 0.6 sec - 30 sec. sec - 60 sec Range Minute. sec - min 3.6 sec - 3 min sec - 0 min 36 sec - 30 min. min - 60 min Hour. min - hr 3.6 min - 3 hr min - 0 hr 36 min - 30 hr. hr - 60 hr 0 Hours min - 0 hr 36 min - 30 hr hr - 00 hr 6 hr hr hr hr USA: (800) 6-IDEC or (408) , Canada: (888) 37-IDEC -9

3 iming Diagrams RE-P external control RE-P 3 start RE-B 7 8 A B external control RE-B A start RE-P, -B A: ON-Delay (power start) B: Interval (power start) Set timer for desired delay, apply power to coil. s transfer after preset time Set timer for desired delay, apply power to coil. s transfer immediately, and has elapsed, and remain in transferred position until timer is reset. Reset occurs return to original position after preset time has elapsed. Reset occurs with removal with removal of power. of power. ()-7 ()A-B ()-4,5-8 ()-7,3-9 (NC) ()-3,6-8 ()4-7,6-9 (NO) 9 B ()-7 ()A-B ()-4,5-8 ()-7,3-9 (NC) ()-3,6-8 ()4-7,6-9 (NO). RE-P: Do not apply voltage to terminals #5, #6 & #7.. RE-B, -B: Do not apply voltage to terminals #, #5 & #8. 3. IDEC sockets are as follows: RE-P: SRP-06* pin type socket, RE-P: SR3P-05* pin type socket, RE-B, -B: SR3B-05* blade type socket, (*-may be followed by suffix letter A,B,C or U). C: Cycle (power start, OFF first) Set timer for desired delay, apply power to coil. First transfer of contacts occurs after preset delay has elapsed, after the next elapse of preset delay contacts return to original position. he timer now cycles between on and off as long as power is applied (duty ratio :). ()-7 ()A-B ()-4,5-8 ()-7,3-9 (NC) ()-3,6-8 ()4-7,6-9 (NO) A: ON-Delay (signal start) When a preset time has elapsed after the start input turned on while power is on, the NO output contact goes on. (A)-0 (B)-5 (A)-4,8- (B)-7,3-9 (NC) (A)-3,9- D: Cycle 3 (power start, ON first) Functions in same manner as Mode C, with the exception that first transfer of contacts occurs as soon as power is applied. he ratio is :. ime On = ime Off ()-7 ()A-B ()-4,5-8 ()-7,3-9 (NC) ()-3,6-8 ()4-7,6-9 (NO) RE-P, -B B: Cycle (signal start, OFF first) When the start input turns on while power is on, the output oscillates at a preset cycle (duty ratio :), starting while the NO contact off. (A)-0 (B)-5 (A)-4,8- (B)-7,3-9 (NC) (A)-3,9- C: Cycle 4 (signal start, ON first) When the start input turns on while power is on, the NO contact goes on. he output oscillates at a preset cycle (duty ratio :). (A)-0 (B)-5 (A)-4,8- (B)-7,3-9 (NC) (A)-3,9- E: Signal OFF-Delay When power is turned on while the start input is on, the NO output contact goes on. When a preset time has elapsed after the start input turned off, the NO output contact goes off. (A)-0 (B)-5 (A)-4,8- (B)-7,3-9 (NC) (A)-3,9- a F: One-Shot (signal start) When the start input turns on while power is on, the NO output contact goes on. When a preset time has elapsed, the NO output contact goes off. (A)-0 (B)-5 (A)-4,8- (B)-7,3-9 (NC) (A)-3,9- D: Signal ON/OFF-Delay When the start input turns on while power is on, the NO output contact goes on. When a preset time has elapsed while the start input remains on, the output contact goes off. When the start input turns off, the NO contact goes on again. When a preset time has elapsed after the start input turned off, the NO contact goes off. (A)-0 (B)-5 (A)-4,8- (B)-7,3-9 (NC) (A)-3,9- a a a a a a Note : =, a=shorter than set time, (): RE-P, (): RE-B, (A): RE-P, (B): RE-B -0 USA: (800) 6-IDEC or (408) , Canada: (888) 37-IDEC

4 emperature Derating Curves Mounting A Allowable Current 0A 7A Mounting B Allowable Current Mounting A Mounting B Derating Curve Derating Curve 50ºC 65ºC 50ºC 65ºC Ambient emperature Ambient emperature 7A 5A Instructions ypes RE-PAF0 Connection type P: Pin B: Blade Mode : No Control Signal A: ON-Delay B: Interval C: Cycle D: Cycle 3 Installation of Hold-Down Springs DIN Rail Mount Socket Insert the springs into the outer slots with the projections facing inside. Voltage AF0: 00 to 40V AC(50/60Hz) AD4: 4V AC(50/60Hz)/4V DC D: V DC : Control Signal A: ON-Delay B: Cycle C: Cycle 4 D: Signal ON/OFF-Delay E: Signal OFF-Delay F: One-Shot Insert the springs into the slots. Switch Settings 3 Mode Selector Scale Selector 3 ime Range Selector. urn the selectors securely using a flat screwdriver 4mm wide (maximum). Note that incorrect setting may cause malfunction. Do not turn the selectors beyond their limits.. Since changing the setting during timer operation may cause malfunction, turn power off before changing. Socket SRP-06 Hold-down Spring (sold separately) SFA-0 (use two springs) Socket SR3P-05 Hold-down Spring (sold separately) SFA-03 (use two springs) Safety Precautions Special expertise is required to use Electronic. All Electronic are manufactured under IDEC's rigorous quality control system, but users must add a backup or fail safe provision to the control system when using the Electronic imer in applications where heavy damage or personal injury may occur should the Electronic imer fail. Install the Electronic imer according to instructions described in this catalog. Make sure that the operating conditions are as described in the specifications. If you are uncertain about the specifications, contact IDEC in advance. In these directions, safety precautions are categorized in order of importance under Warning and Caution. Warnings Warning notices are used to emphasize that improper operation may cause severe personal injury or death. urn power off to the Electronic timer before starting installation, removal, wiring, maintenance, and inspection on the Electronic imer. Failure to turn power off may cause electrical shocks or fire hazard. Do not use the Electronic imer for an emergency stop circuit or interlocking circuit. If the Electronic imer should fail, a machine malfunction, breakdown, or accident may occur. Caution Caution notices are used where inattention might cause personal injury or damage to equipment. he Electronic imer is designed for installation in equipment. Do not install the Electronic imer outside equipment. Install the Electronic imer in environments described in the specifications. If the Electronic imer is used in places where it will be subjected to high-temperature, high-humidity, condensation, corrosive gases, excessive vibrations, or excessive shocks, then electrical shocks, fire hazard, or malfunction could result. Use an IEC607-approved fuse and circuit breaker on the power and output line outside the Electronic imer. Do not disassemble, repair, or modify the Electronic imer. When disposing of the Electronic imer, do so as industrial waste. USA: (800) 6-IDEC or (408) , Canada: (888) 37-IDEC -

5 DIN Rail Mounting Accessories Part Numbers: DIN Rail/Surface Mount Sockets and Hold-Down Springs DIN Rail Mount Socket Applicable Hold-Down Springs Style Appearance Use with Part No. Appearance Part No. -Pin Screw erminal (dual tier) RE-P SR3P-05 SFA-03 -Pin FingerSafe Socket RE-P SR3P-05C 8-Pin Screw erminal RE-P SRP-06 SFA-0 -Blade Screw erminal RE-B RE-B SR3B-05 DIN Mounting Rail Length 000mm BNDN000 Panel Mounting Accessories Part Numbers: Flush Panel Mount Adapter and Sockets that use an Adapter Accessory Description Appearance Use with Part No. Panel Mount Adapter Adaptor for flush panel mounting RE timers All RE timers RB-0 8-pin screw terminal (Shown: RE-P SR6P-M08 SR6P-M08 Wiring Socket Adapter) -pin screw terminal RE-P SR6P-M Sockets for use with Panel Mount Adapter 8-pin solder terminal RE-P SR6P-S08 -pin solder terminal RE-P SR6P-S No hold down clips are available for flush panel mounting applications. - USA: (800) 6-IDEC or (408) , Canada: (888) 37-IDEC

6 Dimensions RE-P (8 pin) erminal Style RE-P ( pin)erminal Style 7.3 RE-B/RE-B ( blade) erminal Style Panel Mount Adapter RE imer, 8-Pin and -Pin with SR6P-S08 or SR6P-S 98 maximum Panel hickness 0.8 to 5mm Back Wiring Socket RE imer, 8-Pin with SR6P-M08 Panel hickness 0.8 to 5mm 8-M3.5 erminal Screw max. 5.6 min ø3.6 min max RE imer, -Pin with SR6P-M -M3.5 eminal Screws max. 5.8 min. ø3.6 min max USA: (800) 6-IDEC or (408) , Canada: (888) 37-IDEC -3

Timers NEW DESIGN! RTE Series. RTE Series Analog Timers

Timers NEW DESIGN! RTE Series. RTE Series Analog Timers RE Series imers RE Series Analog imers NEW DESIN! Key features of the RE series include: 0 time ranges and 0 timing functions ime delays up to 600 hours Space-saving package High repeat accuracy of ± 0.%

More information

Timers. GT3W Series Dual Time Range Timers. 250V AC/150V DC Time Range. 1: 0.1sec to 6 hours, 3: 0.1sec to 300 hours

Timers. GT3W Series Dual Time Range Timers. 250V AC/150V DC Time Range. 1: 0.1sec to 6 hours, 3: 0.1sec to 300 hours GT3W Key features: Sequential start, sequential interval, on-delay, recycler, and interval ON timing functions 2 time settings in one timer 8 selectable operation modes on each model Mountable in sockets

More information

DIN Rail Mounting Accessories. Style Appearance Use with Timers Part No. Appearance Part No. RTE-P2 SR3P Pin FingerSafe Socket RTE-P2 SR3P-05C

DIN Rail Mounting Accessories. Style Appearance Use with Timers Part No. Appearance Part No. RTE-P2 SR3P Pin FingerSafe Socket RTE-P2 SR3P-05C RTE Series DIN Rail Mounting Accessories Part Numbers: DIN Rail/Surface Mount Sockets and Hold-Down Springs DIN Rail Mount Socket Applicable Hold-Down Springs Style Appearance Use with Part No. Appearance

More information

T imers Timers Selection Guide Timing Diagrams Overview RTE Series Analog Timers Instructions onlinecomponents.com IDEC.

T imers Timers Selection Guide Timing Diagrams Overview RTE Series Analog Timers Instructions onlinecomponents.com IDEC. Industrial Automation Catalog Section - U906 imers Selection uide iming Diagrams Overview RE Series Analog imers Instructions imers For up-to-date information, or to request a full copy of this catalog,

More information

Timers. RTE Series. RTE Series Analog Timers. Specifications. G-8 USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC

Timers. RTE Series. RTE Series Analog Timers. Specifications. G-8  USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC Analog Timers Key features of the RTE series include: time ranges and timing functions ON-delay, interval, OFF-delay, one-shot Time delays up to 0 hours Space-saving package (." x." x.0") High repeat accuracy

More information

GT3F Series True OFF Delay Timers

GT3F Series True OFF Delay Timers TF Series TF Series True OFF Delay Key features of the TF series include: Mountable in sockets or flush panel True power OFF-delay up to 10 minutes No external control switch necessary Available with reset

More information

Timers. GT5Y Series ON Delay Timers. ±3% maximum (over 10 to 50 C, reference temperature 20 C) Setting Error. ±10% maximum

Timers. GT5Y Series ON Delay Timers. ±3% maximum (over 10 to 50 C, reference temperature 20 C) Setting Error. ±10% maximum GT5Y GT5Y Series ON Delay Key features: 4PDT, 3A or DPDT, 5A contacts 4 time ranges Repeat error ±0.2% maximum Control settings by hand or screwdriver Power ON and timing out LED indicators Uses the same

More information

Relays & Sockets RR Series Power Relays. Part Number Selection

Relays & Sockets RR Series Power Relays. Part Number Selection RR Series Power Relays Key features: SPDT through PDT, A contacts Midget power type relays Available in pin and blade terminal styles. Options include an indicator, check button for test operations and

More information

TIMERS FOR ALL APPLICATIONS

TIMERS FOR ALL APPLICATIONS Fuji 1/1 DIN Super imers Overview IMERS FOR ALL APPLICAIONS AutomationDirect now offers solid-state timers brought to you by two leaders in the industry, FUJI and Koyo. FUJI Electric has been in business

More information

PS5R Series Switching Power Supplies. The PS5R offers a sleek, compact, ergonomic design, worldwide approvals, and broad range of output capacities.

PS5R Series Switching Power Supplies. The PS5R offers a sleek, compact, ergonomic design, worldwide approvals, and broad range of output capacities. Switching Power Supplies The offers a sleek, compact, ergonomic design, worldwide approvals, and broad range of output capacities. With U 508 isting, additional savings in space and cost can be realized

More information

Safety Control. FS1A Multi-function Safety Relay. Optional Parts. Connecting Tool. Marked Cable Tie. DIN Rail BNDN1000 Aluminum, 1m 35mm wide

Safety Control. FS1A Multi-function Safety Relay. Optional Parts. Connecting Tool. Marked Cable Tie. DIN Rail BNDN1000 Aluminum, 1m 35mm wide Multi-function Relay Key features: No programming required. Configuration complete by turning on a logic switch A safety circuit can be configured easily just by selecting a logic from eight preprogrammed

More information

Intrinsically Safe Explosion Proof Barriers

Intrinsically Safe Explosion Proof Barriers Safety Intrinsically Safe Explosion Proof For more information on this product family, visit our website. Additional resources include: New and updated product information Downloadable software demos &

More information

Safety Control. FS1A Multi-function Safety Relay. Optional Parts. Marked Cable Tie. DIN Rail BNDN1000 Aluminum, 1m 35mm wide

Safety Control. FS1A Multi-function Safety Relay. Optional Parts. Marked Cable Tie. DIN Rail BNDN1000 Aluminum, 1m 35mm wide Control Multi-function Relay Key features: No programming required. Configuration complete by turning on a logic switch A safety circuit can be configured easily just by selecting a logic from eight preprogrammed

More information

Power Supplies. PS5R Standard Series Switching Power Supplies. Part Numbers. Part Number

Power Supplies. PS5R Standard Series Switching Power Supplies. Part Numbers. Part Number Standard Series Key features: Wide power range: 7.W-24W Universal input : 7.W-W: 8-264V AC/1-37V DC 1W: 8-2V AC/17-264V AC 24-37V DC (selectable) W, W, 24W: 8-264V AC/11-3V DC Overcurrent/overvoltage protection

More information

Ultra Slim Relays 24

Ultra Slim Relays 24 Ultra Slim Relays 24 Technical Data... 1 Specifications.2 Model Number Structure - Relays...3 Model Number Selection...4 Accessories...5 Safety Precautions...6 Ultra Slim Relays WERNER`s embody the latest

More information

Communication & Networking

Communication & Networking MicroSmart Master Module Capable of Connecting 62 Slaves Compliance with Ver. 2.1 specifi cations Digital and analog slaves can be connected. Configuration and slave monitoring can be done using LED indicators

More information

PRODUCT SPECIFICATION. PC Board Relays. Series.

PRODUCT SPECIFICATION. PC Board Relays. Series. PRODUCT SPECIFICATION PC Board Relays 26 Series www.wernerelektrik.com Technical Data... Specifications...2 Model Number Structure - Relays...3 Model Number Selection...4 Dimensions... 5-6 Accessories...7

More information

Page Housing Plastic Metal Mounting DIN Rail or surface mount Panel or bracket mount Wattage Range 10W to 240W 7.5W to 240W 10W to 300W

Page Housing Plastic Metal Mounting DIN Rail or surface mount Panel or bracket mount Wattage Range 10W to 240W 7.5W to 240W 10W to 300W Selection Guide Selection Guide PS5R Slim Line PS5R PS3L Operator Interfaces Communication & Networking PLCs NEW Models Appearance Automation Software Page 107 113 118 Housing Plastic Metal Mounting DIN

More information

Multi Voltage Options. Multi Voltage Options 110VAC + 24VAC/DC 230VAC + 24VAC/DC 24VAC/DC 110VAC 230VAC

Multi Voltage Options. Multi Voltage Options 110VAC + 24VAC/DC 230VAC + 24VAC/DC 24VAC/DC 110VAC 230VAC DIN Timers TD 22.5mm DIN rail mounting Electronic Timers AC/DC coil operation Multi-time range Multi-function, On-delay, Off-delay and Star/Delta versions Voltage range selectable Marking plate cover Y

More information

Solid-state Timer. Ordering Information. Specifications. Miniature Timer Compatible with the MY Relay. Accessories. Time Ranges

Solid-state Timer. Ordering Information. Specifications. Miniature Timer Compatible with the MY Relay. Accessories. Time Ranges Solid-state Timer Miniature Timer Compatible with the MY Relay Large transparent time-setting knob facilitates time setting. Flat-blade and Phillips screwdrivers can also be used for time setting. Approved

More information

Conforms to VDE0435/2021 C/250, VDE0110, VDE0106/P100 Conforms to EN , pren

Conforms to VDE0435/2021 C/250, VDE0110, VDE0106/P100 Conforms to EN , pren Solid-state Power OFF-delay Timer II DIN 22.5-mm Solid-state Power OFF-delay Timer High immunity to invertor noise. Long power OFF-delay times; S-series: up to 12 seconds, L-series: up to 120 seconds.

More information

RUC industrial relays of small dimensions

RUC industrial relays of small dimensions Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated current Max. breaking capacity

More information

Solid-state Timer H3YN

Solid-state Timer H3YN Solid-state Timer H3YN Miniature Timer with Multiple Time Ranges and Multiple Operating Modes Minimizes stock. Pin configuration compatible with MY Power Relay. Standard multiple operating modes and multiple

More information

DIN 48 SIZE DIGITAL TIMER. Compact, Easy-to-read, Easy-to-use... A digital timer made to meet the market s needs.

DIN 48 SIZE DIGITAL TIMER. Compact, Easy-to-read, Easy-to-use... A digital timer made to meet the market s needs. DIN SIZE DIGIAL IMER imers Compact Easy-to-read Easy-to-use... A digital timer made to meet the market s needs. Pin type Product types Part names terminal type Features. Bright and Easy-to-Read Display

More information

RM84 miniature relays

RM84 miniature relays RM84 miniature relays RM84 Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load (capacity) AC AC1 AC15 DC1 DC13 Motor load acc. to

More information

HR1S-AC Safety Relay Modules

HR1S-AC Safety Relay Modules HRS-AC Relay Modules Transistor output provided. Removable terminal block (HRS-AC52P) allows for easy module replacement. Fault diagnosis function with dual safety circuits. Internal relay operations can

More information

Operation mode. Output configuration. Relay DC SSR. Light-ON Dark-ON (switch selectable) Relay DC SSR. Relay DC SSR

Operation mode. Output configuration. Relay DC SSR. Light-ON Dark-ON (switch selectable) Relay DC SSR. Relay DC SSR Built-in Power Supply Photoelectric Sensor CSM DS_E_12_3 Model Contribute to Overall Cost Reduction erminal Block Models Easy to wire and adjust. For the most recent information on models that have been

More information

RUC industrial relays of small dimensions

RUC industrial relays of small dimensions with adaptor (V) with adaptor (H) Power relays of general application AC and DC coils Mounting: in sockets; 35 mm rail mount acc. to PN-EN 60715; on panel; PCB Versions: faston 187 (4,8 x 0,5 mm); faston

More information

Solid-state Timer. Ordering Information. Miniature Timer with Multiple Time Ranges and Multiple Operating Modes H3YN- - Accessories (Order Separately)

Solid-state Timer. Ordering Information. Miniature Timer with Multiple Time Ranges and Multiple Operating Modes H3YN- - Accessories (Order Separately) Solid-state Timer Miniature Timer with Multiple Time Ranges and Multiple Operating Modes Minimizes stock. Pin configuration compatible with MY Power Relay. Standard multiple operating modes and multiple

More information

RUC-M industrial relays for DC loads

RUC-M industrial relays for DC loads Contact data Number and type of contacts Contact material Rated / max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated current Min. breaking capacity

More information

PROGRAMMABLE MULTI-FUNCTION

PROGRAMMABLE MULTI-FUNCTION PROGRAMMABLE MULTI-FUNCTION DIP-Switch Digital-Set TD-8 Series time delay relays plug-in Sixteen user-selectable modes in one unit DIP-Switches for accurate digital set of time delay & selection of function

More information

PROGRAMMABLE MULTI-RANGE REPEAT CYCLE & DELAYED INTERVAL

PROGRAMMABLE MULTI-RANGE REPEAT CYCLE & DELAYED INTERVAL PROGRAMMABLE MULTI-RANGE REPEAT CYCLE & DELAYED INTERVAL TR-6 Series Time Ranger tm INPUT VOLTAGE PRODUCT WIRING/ FUNCTION 50/60Hz. NUMBER SOCKET time delay relays plug-in Each unit has 16 timing ranges

More information

NON-PROGRAMMABLE ON DELAY, INTERVAL, TRUE OFF DELAY & FLASHER

NON-PROGRAMMABLE ON DELAY, INTERVAL, TRUE OFF DELAY & FLASHER time delay relays plug-in NON-PROGRAMMABLE ON DELAY, INTERVAL, TRUE OFF DELAY & FLASHER Onboard & remote adjustable or fi xed time delays from 0.05 seconds to 2 hours Uses industry-standard 8 pin octal

More information

H3CR-F H3CR-F8 H3CR-F-300 H3CR-F8-300

H3CR-F H3CR-F8 H3CR-F-300 H3CR-F8-300 R Solid-State Repeat-Cycle Timer 1/1 DIN Solid-State Repeat-Cycle Timer Wide power supply ranges of 100 to 240 VAC 24 VAC/VDC, 12VDC Combinations of independent long or short / time settings are possible

More information

Solid-state Timer. Ordering Information. Ultra-slim Timer for G2R Relay Socket. H3RN-jj. Accessories (Order Separately) Connecting Socket

Solid-state Timer. Ordering Information. Ultra-slim Timer for G2R Relay Socket. H3RN-jj. Accessories (Order Separately) Connecting Socket Solid-state Timer Ultra-slim Timer for G2R Relay Socket Pin configuration compatible with G2R Relay and mounts to the P2R/P2RF Socket. Standard multiple time ranges and multiple operating modes. Conforms

More information

Interlock Switches. Selection Guide. HS7A-DMC Magnetic Safety Switches

Interlock Switches. Selection Guide. HS7A-DMC Magnetic Safety Switches HSA-DMC Magnetic Safety Switches Key features: Compact size and easy positioning. Combination with proprietary relay modules achieves safety category 4 (EN954-1). Compact size ( 16 51mm) Positioning for

More information

Self-Powered Counters H7EC

Self-Powered Counters H7EC Self-Powered Counters Subminiature Count Totalizers Require No External Power Supply Subminiature 8 x mm (1.89 x.9 in) Improved noise immunity Screw terminal and wire-wrap types available AC, DC, and no-voltage

More information

Conductive Level Controller

Conductive Level Controller Conductive Level Controller 61F-D21T-V1 Ideal for level control for industrial facilities and equipment. Outputs can be set to self-hold at ON or OFF using self-holding circuits. Sensitivity adjustment

More information

Slim Relay G2RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. Relay and Socket Combinations

Slim Relay G2RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. Relay and Socket Combinations Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Transparent housing enables checking relay

More information

Thermal-Magnetic Circuit Breaker 2216-S

Thermal-Magnetic Circuit Breaker 2216-S Thermal-Magnetic Circuit Breaker 226-S Description One and two pole thermal-magnetic circuit breaker in compact design with slide actuator, trip-free mechanism, various trip characteristics and optional

More information

Communications & Networking

Communications & Networking is a type of field bus that is primarily intended to be used to control sensors and actuators. is a network system that is compatible with the IEC62026 standard. A master device can communicate with slave

More information

PC RELAY TERMINAL/ PC TERMINAL

PC RELAY TERMINAL/ PC TERMINAL Input points Output points PC Relay (PC relays mounted) PC Input points Output points Input points Output points Input points Output points Input points Output points Output points ORDERING INFORMATION

More information

H3CA-8H-AC/100/110/120

H3CA-8H-AC/100/110/120 Solid-State Timer 1/16 DIN, Digital-Set Timer with 0.1 Second to 9,990 Hours Range 8 field-selectable operation modes Universal AC/DC supply voltage timers available Operations include ON-delay, Repeat

More information

Solid-State Counter/Timer

Solid-State Counter/Timer Solid-State Counter/Timer 1/16 DIN, Easy-to-Operate Combination Counter and Timer Operation selectable as preset counter or timer 6-digit LCD display Present Value: 8 mm (0.32 in) Set Value: 4 mm (0.16

More information

Contact form. Operating Force. SPDT 25g Unsealed Solder / 187 Quick Connect. SPDT 50g Unsealed Solder / 187 Quick Connect

Contact form. Operating Force. SPDT 25g Unsealed Solder / 187 Quick Connect. SPDT 50g Unsealed Solder / 187 Quick Connect VX Miniature Snap Action Switch Compact snap action switch with low force operation Internal mechanism assures outstanding contact reliability Models available for micro load up through 5 Amps ROHS Compliant

More information

DPST-NO None 2 channels Auto-reset Inverse (+/-) 24 VAC/VDC 4 G9SB-2002-A 1 channel or 2

DPST-NO None 2 channels Auto-reset Inverse (+/-) 24 VAC/VDC 4 G9SB-2002-A 1 channel or 2 Safety Relay Unit Ultra Slim Safety Relay Unit 17.5 mm wide models available with 2 or 3 poles. 22.5 mm wide 3 pole models also available EN Standards (TÜV approval) DIN-track mounting possible Ordering

More information

Contact form. Operating Force. SPDT 100g Unsealed Solder / 187 Quick Connect. SPDT 200g Unsealed Solder / 187 Quick Connect

Contact form. Operating Force. SPDT 100g Unsealed Solder / 187 Quick Connect. SPDT 200g Unsealed Solder / 187 Quick Connect V Miniature Snap Action Switch Industry standard design with 10/15 Amp ratings Long mechanical life of 50,000,000 operations minimum Available in either thermoplastic or thermosetting resin Can be used

More information

Sockets. SY Series: DIN Rail Snap-Mount. F-14 USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC. SY4S Sockets SY4S-05

Sockets. SY Series: DIN Rail Snap-Mount. F-14  USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC. SY4S Sockets SY4S-05 SY Series: DIN Rail Snap-Mount SY4S Sockets SY4S-05 Style Terminal Wire Size Electrical Rating Compatible Relay Compatible Timer Hold-Down Spring 14-blade, snap-mount/surface mount M3 screw with captive

More information

Micro Contactor MA Series

Micro Contactor MA Series Relay-sized contactor, making it the world s smallest >3mm contact clearance acc. to IEC 60335-1 for Safety Applications Reversing contactor with mechanical interlock 3 Pole and 1 Aux. Contact NO or NC

More information

HITACHI. EH-150 series PLC EH-RTD8 Resistance Temperature Detective input module Instruction manual. Safety precautions

HITACHI. EH-150 series PLC EH-RTD8 Resistance Temperature Detective input module Instruction manual. Safety precautions HITACHI EH-150 series PLC Resistance Temperature Detective input module Instruction manual Thank you for purchasing a Hitachi Programmable Logic Controller. To operate it safely, please read this instruction

More information

Functional configuration Rated input voltage Power ratings Output voltage Output current Part number Non-PFC

Functional configuration Rated input voltage Power ratings Output voltage Output current Part number Non-PFC Switching Power Supply DIN-Rail Mount Power Supply With Capacity Up to 240 W for General or Industrial Applications Wide power range: 15 to 240 W 15 W and PFC Models with Universal voltage of 100 to 230

More information

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-F...

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-F... Magnetic and Hydraulic-Magnetic Circuit Breaker 830-F... Description Single and multipole magnetic circuit breakers with trip-free mechanism and toggle actuation. A choice of fast magnetic only or hydraulically

More information

Making Hazardous Operations Safe and Productive

Making Hazardous Operations Safe and Productive NEW Safety Guard Switching Unit G9SX-GS Making Hazardous Operations Safe and Productive Making Hazardous Operations Safe and Productive This new addition to the model of Flexible Safety Unit G9SX series

More information

NON-PROGRAMMABLE OFF DELAY, SINGLE SHOT

NON-PROGRAMMABLE OFF DELAY, SINGLE SHOT time delay relays plug-in NON-PROGRAMMABLE OFF DELAY, SINGLE SHOT & WATCHDOG 8 Pin SPDT Versions TR-5 Series These are 8 pin 10A SPDT versions of our standard 11 pin DPDT products Onboard & remote adjustable

More information

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-F...

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-F... Description Single and multipole magnetic circuit breakers with trip-free mechanism and toggle actuation. A choice of fast magnetic only or hydraulically delayed switching characteristics (S-type MO or

More information

Solid-state Timer. Mounting system contact t contact. t Surface mounting/ track mounting

Solid-state Timer. Mounting system contact t contact. t Surface mounting/ track mounting Solid-state Timer DIN-sized (48 x 48, 45 x 75 mm) Timer with Digital Setting and LCD Display Dual power supplies for free AC/DC. Eight operation modes selectable with one unit. Any desired time can be

More information

Relays & Sockets. RQ Series. RQ Series PCB Relays Part Number Selection

Relays & Sockets. RQ Series. RQ Series PCB Relays Part Number Selection Q Series Q Series PB elays Switches & Pilot Lights Display Lights IDE Q relays are low-profile, PB relays that provide quality within a compact package. Size equals value. Q relays are small, yet maintain

More information

Safety Relay Unit (I/O Unit Type)

Safety Relay Unit (I/O Unit Type) Safety Relay Unit (I/O Unit Type) CQM1-SF200/ CS1W-SF200 Same Dimensions as I/O Unit Less Installation Space and Wiring Required Safety Relay Unit that can be used as an I/O Unit for OMRON s CQM1H and

More information

Transistor drive 2c/4c 5A slim power relays

Transistor drive 2c/4c 5A slim power relays Transistor drive c/c 5A slim power relays NC RELAYS NC Flat type () NC (Plug-in type) RoHS compliant NC Flat type () NC () FEATURES 1. Compact, slim design Use of high-performance flat electromagnetic

More information

Barriers. EB3N Discrete Input Barrier with Redundant Output

Barriers. EB3N Discrete Input Barrier with Redundant Output EB3N Discrete Input Barrier with Redundant Output s Build a safety system in an explosive atmosphere. Key features: Safety Performance Performance level e Category 4 [Exia] II C Ensures safety and machine

More information

masterelectronics.com onlinecomponents.com

masterelectronics.com onlinecomponents.com Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements (IEC 529) Monoblock construction assures high sealing capability

More information

S8VE (60/90/120/180/240-W Models)

S8VE (60/90/120/180/240-W Models) Switch Mode Power Supply S8VE (60/90/120/180/240-W Models) CSM_S8VE_DS_E_1_1 60/90/120/180/240-W Models Improved Versions of Standard-type Power Supplies without Indication Monitor. Safety standards: UL508/60950-1,

More information

Syr-line TMR48D Digital Timer

Syr-line TMR48D Digital Timer yr-line MR48D Digital imer Front Panel 48x48 (1/16 DIN) Large LED or LCD creen (13.2 mm) Multi-function and single-function Basic & Advance configuration modes Multi-range (0.05s-9999h) Multi-voltage (24-240V

More information

AS-Interface Safety at Work

AS-Interface Safety at Work Safety Emergency Stop Switches... 478 Operating Instructions... 482 www.idec.com/safety AS-Interface Safety at Work Light Curtains Table of Contents LED Lighting - Pg. 1 Automation & Sensing - Pg. 21 Safety

More information

Classification Enclosure rating Input voltage Type of

Classification Enclosure rating Input voltage Type of Slim Relay G2RV The World's First Industrial Slim Relay Large plug-in terminals for reliable connection. LED indicator and mechanical flag to check operation. Special input type with gold plated contacts.

More information

Syr-line TMR48D Digital Timer

Syr-line TMR48D Digital Timer yr-line MR48D Digital imer Front Panel 48x48 (1/16 DIN) Large LED or LCD creen (13.2 mm) Multi-function and single-function Basic & Advance configuration modes Multi-range (0.05 s 9999 h) Multi-voltage

More information

Special-purpose Basic Switch

Special-purpose Basic Switch Special-purpose Basic Switch DPDT Basic Switch for Two Independent Circuit Control Incorporates two completely independent built-in switches. Ideal for switching the circuits operating on two different

More information

Switching Power Supply S8E1. Ordering Information. Compact and Economical Switching Power Supply

Switching Power Supply S8E1. Ordering Information. Compact and Economical Switching Power Supply Switching Power Supply Compact and Economical Switching Power Supply Models range from 10 to 50 W Open-frame and covered types Wide range of output voltage: 5-, 12-, 15- and 24-V models UL, CSA approved

More information

Cable specifications PVC

Cable specifications PVC IO-Link Proximity Sensor (Spatter-resistant Models) EEQ-@-IL@ IO-Link Makes Sensor Level Information Visible and Solves the hree Major Issues at Manufacturing Sites! A Proximity Sensor hat Can Be Used

More information

Sensing method Appearance Connection method Sensing distance Output Model. M12 connector 10±3 mm. Size Type Appearance Cable length Model Straight

Sensing method Appearance Connection method Sensing distance Output Model. M12 connector 10±3 mm. Size Type Appearance Cable length Model Straight Color Photoelectric Sensor Color Detection on Any Type of Packaging. Narrow Beam and Large Lens for Stable Detection of Workpieces Tilted at Various Angles. Detects subtle color differences. High luminance,

More information

Ice Cube Relays. R2/R4 Plug-in Power Relays... G58 Technical Information... G63. R15 Plug-in Power Relays... G68 Technical Information...

Ice Cube Relays. R2/R4 Plug-in Power Relays... G58 Technical Information... G63. R15 Plug-in Power Relays... G68 Technical Information... Ice Cube Relays R2/R4 Plug-in Power Relays... 58 Technical Information... 63 R15 Plug-in Power Relays... 68 Technical Information... 72 RUC Plug-in Power Relays... 76 Technical Information... 79 RY2 Plug-in

More information

812/ 814/ 815 digital timers

812/ 814/ 815 digital timers 8/ 84/ 85 digital timers 8 84 85 Relay output digital timer Multirange Multivoltage or relay outputs Reset function on panel (imers 85) Data saved in the event of a break in supply (imer 85) Access to

More information

Basic Switch. Pin plunger Short hinge Hinge lever Long hinge lever Simulated hinge Short hinge Hinge roller lever lever roller lever lever

Basic Switch. Pin plunger Short hinge Hinge lever Long hinge lever Simulated hinge Short hinge Hinge roller lever lever roller lever lever Basic Switch MINIATURE Watertight Miniature Basic Switch High-quality watertight, high-precision miniature basic switch meets IP67 requirements IEC 529 (lead wire type) Monoblock construction assures high

More information

Solid-state Timer H3FA. Model Number Structure. DIP Model Timer for PC Board Use Provides Contact and Solid-state Output

Solid-state Timer H3FA. Model Number Structure. DIP Model Timer for PC Board Use Provides Contact and Solid-state Output Solid-state Timer H3FA Please read and understand this catalog before purchasing the products. Please consult OMRON representative if you have any questions or comments. Refer to Warranty and Application

More information

Time-limit operation/ self-resetting DPDT --- H3M H3M with Y92F-40 adapter SPDT SPDT H3M-H H3M-H with Y92F-40 adapter

Time-limit operation/ self-resetting DPDT --- H3M H3M with Y92F-40 adapter SPDT SPDT H3M-H H3M-H with Y92F-40 adapter Solid-state Timer Solid-state Timer with Variable Time Ranges Four time ranges are selectable per timer unit. Wide timing range of 0.05 second to 30 hours can be covered by a combination of five timer

More information

Time-limit contact Time ranges Supply voltage Mounting s to 3 h 24, 100 to 120, 200 to 230 VAC (50/60 Hz); 12, 24, 48, 125, 100 to 110 VDC

Time-limit contact Time ranges Supply voltage Mounting s to 3 h 24, 100 to 120, 200 to 230 VAC (50/60 Hz); 12, 24, 48, 125, 100 to 110 VDC Solid-state Timer CSM DS_E_4_1 Miniature Timer Compatible with the MY Relay Semi-multi power supply voltage. Large transparent time setting knob facilitates time setting. A flat-blade and Phillips screwdriver

More information

SH Series: DIN Rail Snap-Mount Sockets. SH1B Sockets " (17mm) Ø 0.140" (3.6mm) 2.613" (67mm) 0.63" 0.098" (16mm) (2.5mm) 0.

SH Series: DIN Rail Snap-Mount Sockets. SH1B Sockets  (17mm) Ø 0.140 (3.6mm) 2.613 (67mm) 0.63 0.098 (16mm) (2.5mm) 0. SH Series: Snap-Mount SH Series: Snap-Mount Sockets SH1B Sockets SH1B-05 5-blade, snap-mount/surface mount (Coil) M3 screws/(contact) M3.5 screws with captive wire clamp 250V, 10A SY2S-021 SA-101, SA-202

More information

Model Number Structure

Model Number Structure Solid State Relays with Failure Detection Function G3PC CSM_G3PC_DS_E_1_1 Refer to Safety Precautions for All Solid State Relays. Detects failures in SSR used for heater temperature control and simultaneously

More information

Temperature Controller E5C4

Temperature Controller E5C4 Temperature Controller 1/16 DIN Sized, Digital-Set Controller Features Easy-to-Read LED Display Proportional-derivative (PD) control or ON/OFF control models Front panel offset adjustment on PD controllers

More information

SAFETY RELAY YRB-4EML-31S MAIN FEATURES

SAFETY RELAY YRB-4EML-31S MAIN FEATURES SAFETY RELAY TYPE 4 SAFETY PROTECTION DEVICE FOR SAFETY LIGHT CURTAINS/BARRIERS MAIN FEATURES For safety light curtains and access control barriers, emergency stop, door switch Safety Integrity Level (SIL)

More information

Long-time range model (0.1 min to 10 h) 24 VAC; SPDT H3RN-1 H3RN-11 12, 24 VDC DPST-NO H3RN-2 H3RN-21

Long-time range model (0.1 min to 10 h) 24 VAC; SPDT H3RN-1 H3RN-11 12, 24 VDC DPST-NO H3RN-2 H3RN-21 Solid-state timer CSM DS_E_3_2 Ultra-slim Timer for G2R Relay Socket Pin configuration compatible with G2R Relay and mounts to the P2R/P2RF Socket. Standard multiple time ranges and multiple operating

More information

ALLEN BRADLEY RELAY Bulletin 700-HF

ALLEN BRADLEY RELAY Bulletin 700-HF ALLEN BRADLEY RELAY Bulletin 700-HF Contact Rating DPDT, 3PDT, 4PDT Plug-in Quick Connect Solder Terminals Options: LED, Push-to-Test Operator DEMENSIONS: Bulletin 700-HF Relay (DPDT) Bulletin 700-HF (3PDT)

More information

HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE

HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE HIGH PERFORMANCE MINIATURE SWITCHES WITH WIDE RANGE NV (AH7) SWITCHES FEATURES Extra long-life spring mechanism More than 10 7 mechanical operations, 10 electrical High contact rating of 1 Amps with an

More information

Magnetic and Hydraulic-Magnetic Circuit Breaker

Magnetic and Hydraulic-Magnetic Circuit Breaker Description Single or multipole hydraulic-magnetic circuit breakers with trip-free - mechanism and toggle actuation. A choice of switching characteristics ensures suitability for a wide range of applications.

More information

Operating instructions Enabling switch (handle switch) ZSD5 ZSD6. 1. About this document. Content. 7 Appendix 7.1 Wiring example...

Operating instructions Enabling switch (handle switch) ZSD5 ZSD6. 1. About this document. Content. 7 Appendix 7.1 Wiring example... 7 ppendix 7.1 Wiring example...5 8 Declaration of conformity 8.1 EC Declaration of conformity...6 Operating instructions.............pages 1 to 6 Translation of the original operating instructions x.000

More information

TeSys IEC Contactors and Overload Relays

TeSys IEC Contactors and Overload Relays TeSys IEC Contactors and Overload Relays Making High-Fault Short-Circuit Current Ratings Simple Schneider Electric is an industry leader in IEC contactors and overload relays, and is recognized as the

More information

FS1A Safety Controller

FS1A Safety Controller FS1A ler New (11 logics), introducing 4 new logics! circuit logics compliant international standards ISO 13849-1 PLe International Standard Compliant Cost Saving No Programming Required Compact 24 logics

More information

3 Pole Contactors with AC operating coils

3 Pole Contactors with AC operating coils 1 3 Pole Contactors with AC operating coils Characteristics General Characteristics Switching Current 9A ~ Rated insulation voltage (Ui) (Conforming to IEC 158-1) V 750 IEC 60947-4 V 1000 Conforming to

More information

G9SX-GS. Safety Guard Switching Unit. A Safety Measure for Hazardous Operations That Does Not Lower Productivity. Auto Switching Function

G9SX-GS. Safety Guard Switching Unit. A Safety Measure for Hazardous Operations That Does Not Lower Productivity. Auto Switching Function Safety Guard Switching Unit CSM DS_E_6_1 A Safety Measure for Hazardous Operations That Does Not Lower Productivity Two functions support two types of application: Auto switching: For applications where

More information

Relays & Sockets. RSC Series. RSC Series Solid State Relays. Part Number Selection Specifications

Relays & Sockets. RSC Series. RSC Series Solid State Relays. Part Number Selection Specifications RSC Series RSC Series Solid State Relays Key features of the RSC series include: Slim design allows for DIN rail or panel mounting Built-in heat sink maximizes current output capability Epoxy-free design

More information

PROGRAMMABLE CONTROLLER. FP0 A/D Converter Unit. Technical Manual ARCT1F321E

PROGRAMMABLE CONTROLLER. FP0 A/D Converter Unit. Technical Manual ARCT1F321E PROGRAMMABLE CONTROLLER Technical Manual ARCT1F321E-2 2008.11 Safety Precautions Observe the following notices to ensure personal safety or to prevent accidents. To ensure that you use this product correctly,

More information

Communications & Networking

Communications & Networking 8-Point Source Input & 8-Point Transistor Sink Output odule () Key features include: Communicate with network 8-point source input and 8-point sink output module Removable terminal blocks Use as remote

More information

Safety relay emergency stop/protective door, 24VDC/AC, 4 enabling paths

Safety relay emergency stop/protective door, 24VDC/AC, 4 enabling paths DATASHEET - ESR5-NO-41-24VAC-DC Safety relay emergency stop/protective door, 24VDC/AC, 4 enabling paths Part no. ESR5-NO-41-24VAC-DC Catalog No. 118701 EL-Nummer (Norway) 0004133317 Delivery program Product

More information

Digital Timer. Ordering Information. 1/16 DIN, Quartz Timer with Four-Digit LED Display

Digital Timer. Ordering Information. 1/16 DIN, Quartz Timer with Four-Digit LED Display Digital Timer 1/16 DIN, Quartz Timer with Four-Digit LED Display Five wide ranges to choose from Wide-range AC or DC supply voltages Elapsed time (UP) or time remaining (DOWN) display available Selectable

More information

RF1V Force Guided Relays SF1V Relay Sockets

RF1V Force Guided Relays SF1V Relay Sockets FV Force Guided elays SFV elay Sockets www.relays.de EN00 Typ A TÜV-Zulassung von 8 Enables flexible construction of safety circuits Complies with International Standards Force guided contact mechanism

More information

PSR UC/ESAM4/3X1/1X2/B

PSR UC/ESAM4/3X1/1X2/B Safety relay for emergency stop and safety door monitoring Data sheet 105318_en_02 PHOENIX CONTACT 2014-06-13 1 Description The safety relay can be used in safety circuits according to EN 60240-1 and IEC

More information

Operating instructions. Speed monitor D / / 2014

Operating instructions. Speed monitor D / / 2014 Operating instructions Speed monitor D200 80005257 / 00 05 / 2014 Contents 1 Preliminary note...4 1.1 Symbols used...4 1.2 Warning signs used...4 2 Safety instructions...5 2.1 General...5 2.2 Target group...5

More information

1492-SP Supplementary Protectors

1492-SP Supplementary Protectors Dual terminals provide wiring/bus bar flexibility and clamp from both sides to improve connection reliability Approval marks are easily visible on dome Terminal design helps prevent wiring misses Scratch-

More information

Thermal-Magnetic Circuit Breaker 4220-T...

Thermal-Magnetic Circuit Breaker 4220-T... Thermal-Magnetic Circuit Breaker 40-T... Description Single, double and three pole thermal-magnetic circuit breakers with high rupture capacity to UL 489 (5 ka), EN/IEC 60934 (6kA) and UL 077 (5 ka). With

More information

Model Number Structure

Model Number Structure Solid-state Twin Timers CSM DS_E_1_5 DIN 48 48-mm Twin Timers Wide power supply ranges of 100 to 240 VAC and 48 to 125 VDC respectively. ON- and OFF-times can be set independently and so combinations of

More information