Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment

Transcription

1 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED LEASING/MONTHLY RENTALS ITAR RTIFIED SECURE ASSET SOLUTIONS SERVI NTER REPAIRS Experienced engineers and technicians on staff at our full-service, in-house repair center SM InstraView REMOTE INSPECTION Remotely inspect equipment before purchasing with our interactive website at Contact us: (888) 88-SOUR WE BUY USED EQUIPMENT Sell your excess, underutilized, and idle used equipment We also offer credit for buy-backs and trade-ins LOOKING FOR MORE INFORMATION? Visit us on the web at for more information on price quotations, drivers, technical specifications, manuals, and documentation

2 9 Link Remote I/O Components Overview Parts Summary and Configuration Guide to Build a Wire-Saving Link Remote I/O System 1 Just two wires transmit data, simplifies installation and troubleshooting 1 High- (100 m max. at 3 ms) and long distance (500 m max. at ) configurations available 1 Wide range of transistor and relay blocks to meet application needs Ordering Information 3 PLCMASTERLINKMODES Appearance I/O classification I/O configuration System compatibility 16-point output, long distance and Use /S CQM1 compact input and output PLCs 32-point output, long distance and terminals 16-point input, long distance and 32-point input, long distance and 16-point input/16-point output, long distance and 16-point input, long distance system 16-point output, long distance system 32-point output, long distance and 32-point input, long distance and Mixed I/O, 16-point input/ 16-point output; long distance and Mixed I/O, 32-point input/ 32-point output; long distance and high- systems Use /S input and output terminals CS1, C200H Alpha and C200HS PLCs, Special I/O CS1, C200H Alpha and C200HS PLCs, Group-2 Special I/O CQM1-02 CQM1-03 CQM1-12 CQM1-13 CQM1-21 C200H-I1 C200H-O1 C200H-02 C200H-12 C200H-21 C200H-22 Note) Note) Note: Information on EC Directives Individual OMRON products that comply with EC Directives conform to the common emission standards of EMC Directives. However, the emission characteristics of these products installed on customers equipment may vary depending on the configuration, wiring, layout, and other conditions of the control panel used. For this reason, customers are requested to check whether the emission characteristics of the entire machine or equipment comply with the EMC Directives. Artisan Technology Group - Quality Instrumentation... Guaranteed (888) 88-SOUR

3 3 16-POINT TERMINALS Transistor I/O Link Modules Appearance I/O classification I/O configuration I/O delay (typical) Internal I/O common Error processing Note 1) NPN compatible Normal -- common T6A1 Note 2) +/-- common T6B1 Note 2) Note 5) PNP compatible +/-- common T6C1 NPN compatible High -- common T6A6 Note 2) 3ms +/-- common T6B6 Note 2) PNP compatible +/-- common T6C6 Output, NPN open collector Normal + common HOLD -R6B ma/point LOAD OFF -R6B31 NPN open collector HOLD -R6C11 Note 5) 500 ma/point LOAD OFF -R6C31 PNP open collector -- common HOLD -R6F ma/point LOAD OFF -R6F31 PNP open collector HOLD -R6G ma/point Note 4) LOAD OFF -R6G31 NPN open collector High + common HOLD -R6B ma/point 3ms LOAD OFF -R6B36 NPN open collector HOLD -R6C ma/point LOAD OFF -R6C36 PNP open collector -- common HOLD -R6F ma/point LOAD OFF -R6F36 PNP open collector HOLD -R6G ma/point Note 4) LOAD OFF -R6G36 Input. NPN compatible Normal +/-- common S-T6B1 High S-T6B6 Note 5) 3ms Output, NPN open collector Normal HOLD S-R6B ma/point LOAD OFF S-R6B31 High HOLD S-R6B16 3ms LOAD OFF S-R6B36 Note: 1. HOLD: The previous output condition will be on hold when an error occurs. LOAD OFF: All outputs will be OFF when an error occurs. 2. The 16-point -T6AP and 16-point -T6BP are different from each other in terminal configuration. 3. N-channel MOSFET open drain output 4. P-channel MOSFET open drain output 5. Information on EC Directives Individual OMRON products that comply with EC Directives conform to the common emission standards of EMC Directives. However, the emission characteristics of these products installed on customers equipment may vary depending on the configuration, wiring, layout, and other conditions of the control panel used. For this reason, customers are requested to check whether the emission characteristics of the entire machine or equipment comply with the EMC Directives. 2 Artisan Technology Group - Quality Instrumentation... Guaranteed (888) 88-SOUR

4 16-point Relay Output Link Modules Appearance I/O classification I/O configuration I/O delay (typical) Error processing Note 1) Output, Relay outputs Normal HOLD G70D-R6R11- G6D-1A DC24 (SPST-NO) Note 2) LOAD OFF G70D-R6R31- Power MOSFET HOLD G70D-R6M11- relay outputs G3DZ-2R6PL DC24 LOAD OFF G70D-R6M31- PCB Models Appearance I/O classification I/O configuration TTL input Output, NPN open collector 50 ma/point I/O delay (typical) Normal High 3ms Normal High 3ms Error processing Note 1) T6D T6D7 HOLD/LOAD OFF -R6A52 selected by wiring -R6A57 3 LINK MASTER ADAPTERS FOR HIGH -DENSITY I/O PLC MODES 16-point Adapters Appearance I/O classification I/O configuration I/O delay (typical) Error processing Note 1) NPN compatible Normal T6E3 High 3 ms T6E8 Output, NPN open collector Normal HOLD -R6A13 50 ma/point LOAD OFF -R6A33 High 3 ms HOLD -R6A18 LOAD OFF -R6A38 32-point Adapters Appearance I/O classification I/O configuration I/O delay (typical) Error processing Note 1) NPN compatible Normal T3E3 32 points High 3 ms T3E8 Output, NPN open collector Normal HOLD -R3A13 32 points 50 ma/point LOAD OFF -R3A33 High 3 ms HOLD -R3A18 LOAD OFF -R3A38 Note: 1. HOLD: The previous output condition will be on hold when an error results. LOAD OFF: All outputs will be OFF when an error results. 2. These G70D Relay Output Link Modules cannot be connected to high-. 3. Information on EC Directives Individual OMRON products that comply with EC Directives conform to the common emission standards of EMC Directives. However, the emission characteristics of these products installed on customers equipment may vary depending on the configuration, wiring, layout, and other conditions of the control panel used. For this reason, customers are requested to check whether the emission characteristics of the entire machine or equipment comply with the EMC Directives. Artisan Technology Group - Quality Instrumentation... Guaranteed (888) 88-SOUR 3

5 3 MIXED I/O LINK MODES Screw Terminal Model (with 16 Input and 16 Output Points) Appearance I/O configuration I/O delay (typical) Error processing Note 1) NPN compatible/ NPN open collector 100 ma/point 16 input/16 output points Normal High 3 ms (switch selectable) HOLD/ LOAD OFF (switch setting) Screw Terminal Models (with 8 Input and 8 Output Points) 3 INPUT LINK CONNECTOR MODE (M12 CONNECTORS) 10-point Terminal Models Appearance Description I/O configuration 10-point sealed input module DeviceNet interface module connects up to 3 C modules I/O delay (typical) Enclosure rating NPN compatible IP67 IP66 C-T10A1 DRT1-C 3 10-POINT TERMINALS Transistor I/O Link Modules 4 Appearance I/O classification I/O configuration Internal I/O common 10 points Note 2) Output, 10 points Error processing Note 1) NPN compatible (No -- common T10S1 two-wire sensor can be connected.) +/-- common T10S3 NPN open collector + common HOLD -R10SC ma/point M-6BS Appearance I/O configuration I/O delay (typical) Error processing Note 1) NPN compatible/ Normal HOLD M-8B NPN open collector 100 ma/point LOAD OFF M-8B31 8 input/8 output points High 3 ms HOLD M-8B16 LOAD OFF M-8B36 PNP compatible/ PNP open collector 100 ma/point 8 input/8 output points Normal LOAD OFF M-8F31 Printed Circuit Board Models Appearance I/O classification I/O configuration Error processing Note 1) 10 points Output, 10 points TTL input NPN open collector 50 ma/point HOLD -T10M2 -R10MC Note: 1. HOLD: The previous output condition will be on hold when an error results. LOAD OFF: All outputs will be OFF when an error results. 2. The 10-point -T10S1 and 10-point -T10S3 are different from each other in terminal configuration. 3. Information on EC Directives Individual OMRON products that comply with EC Directives conform to the common emission standards of EMC Directives. However, the emission characteristics of these products installed on customers equipment may vary depending on the configuration, wiring, layout, and other conditions of the control panel used. For this reason, customers are requested to check whether the emission characteristics of the entire machine or equipment comply with the EMC Directives. Artisan Technology Group - Quality Instrumentation... Guaranteed (888) 88-SOUR

6 Configuration Guidelines 3 16-POINT TRANSISTOR I/O LINK MODES Input (Transmission) Output (Reception) S S PCB model Relay output screw terminal model G70D-R6- Link master adapter () PCB model Link master adapter () Link master adapter (32 points) Link master adapter (32 points) Note: The I/O delay time values of 16-point Link Terminals with Adapters are either 3 ms (typical, for high- models) or (typical, for normal- models). Use a combination of an Input and an Output Link Terminal with the same I/O delay time. Connect two 32-point Link Terminals with Adapters together or a 32-point Link Terminal with an Adapter to two 16-point Link Terminals. 5 Artisan Technology Group - Quality Instrumentation... Guaranteed (888) 88-SOUR

7 3 MIXED I/O LINK MODES 16 Inputs/16 Output or 8 Inputs/8 Outputs (16 input and 16 output points) (16 input and 16 output points) M Input Output M Output Input (8 input and 8 output points) (8 input and 8 output points) M Input Output M Output Input Note: The Mixed I/O Link Terminals are either 3 ms (typical, for high-- models) or (typical, for normal-- models). Use a combination of an Input and an Output Link Terminal with the same transmission (I/O delay time) POINT TRANSISTOR I/O LINK MODES Input (Transmission) Output (Reception) PCB model PCB model C M12 connector model DRT1-C connects up to3c modules DeviceNet Interface Module Note: The 10-point model has a normal I/O delay of (typical); 10-point models with short I/O delay are not available. The transmission signals of the 16-point Link Master Adapters are not compatible with those of the 10-point model. The 16-point Link Master Adapter models and 10-point models cannot be used in combination. 6 Artisan Technology Group - Quality Instrumentation... Guaranteed (888) 88-SOUR

8 NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by OMRON ELECTRONICS, INC. OneEastCommerceDrive Schaumburg, IL OMRON OMRON CANADA, INC. 885 Milner Avenue Scarborough, Ontario M1B 5V Cat. No. GC RIO-1 04/00 Specifications subject to change without notice. Printed in U.S.A. Artisan Technology Group - Quality Instrumentation... Guaranteed (888) 88-SOUR

9 Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED LEASING/MONTHLY RENTALS ITAR RTIFIED SECURE ASSET SOLUTIONS SERVI NTER REPAIRS Experienced engineers and technicians on staff at our full-service, in-house repair center SM InstraView REMOTE INSPECTION Remotely inspect equipment before purchasing with our interactive website at Contact us: (888) 88-SOUR WE BUY USED EQUIPMENT Sell your excess, underutilized, and idle used equipment We also offer credit for buy-backs and trade-ins LOOKING FOR MORE INFORMATION? Visit us on the web at for more information on price quotations, drivers, technical specifications, manuals, and documentation