RM17UAS. Product datasheet Characteristics. voltage control relay RM17-U - range V DC. Main. Complementary. Price* : 70.

Transcription

1 Characteristics voltage control relay RM17-U - range V DC Price* : GBP Main Range of product Product or component type Relay type Product specific application Relay name Relay monitored parameters Time delay type Switching capacity in VA Minimum switching current Maximum switching current Measurement range Dec 7, 2018 Zelio Control Modular measurement and control relays Voltage control relay For single-phase and DC supply RM17UAS Overvoltage or undervoltage detection Self-powered Adjustable s, % on crossing the threshold 1250 VA 10 ma at 5 V DC 5 A AC/DC V voltage DC Utilisation category AC-12 conforming to IEC AC-13 conforming to IEC AC-14 conforming to IEC AC-15 conforming to IEC DC-12 conforming to IEC DC-13 conforming to IEC DC-14 conforming to IEC Complementary Reset time Maximum switching voltage 1500 ms for time delay 250 V AC/DC [Us] rated supply voltage 12 V DC, 50/60 Hz +/- 10 % Supply voltage limits Power consumption in W Immunity to microbreaks V DC <= 1 W DC 20 ms at 12 V Control circuit frequency Hz +/- 10 % Output contacts Nominal output current 1 C/O 5 A 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications

2 Measuring cycle Hysteresis Run-up delay at power-up Measurement accuracy Repeat accuracy Measurement error Polarity Quality labels <= 150 ms measurement cycle as true rms value % of threshold setting <= 100 ms DC <= 500 ms AC +/- 10 % of the full scale value +/- 0.5 % for input and measurement circuit +/- 1 % for time delay < 1 % over the whole range with voltage variation 0.2 %/ C with temperature variation Non reversible polarity on DC supply Overvoltage category III conforming to IEC CE Insulation resistance > 500 MOhm at 500 V DC conforming to IEC > 500 MOhm at 500 V DC conforming to IEC [Ui] rated insulation voltage 250 V conforming to IEC V conforming to IEC Operating position Connections - terminals Any position without derating Tightening torque N.m conforming to IEC Housing material Local signalling Screw terminals 1 x x 4 mm² - AWG 20...AWG 11, solid cable without cable end Screw terminals 2 x x 2.5 mm² - AWG 20...AWG 14, solid cable without cable end Screw terminals 2 x x 1.5 mm² - AWG 24...AWG 16, flexible cable with cable end Screw terminals 1 x x 2.5 mm² - AWG 24...AWG 12, flexible cable with cable end Self-extinguishing plastic LED green for power ON LED yellow for relay ON Mounting support 35 mm symmetrical DIN rail conforming to EN/IEC Electrical durability Mechanical durability Operating rate Width Product weight cycles <= cycles <= 360 operations/hour under full load 17.5 mm 0.08 kg Environment Electromagnetic compatibility Emission standard for industrial environments conforming to EN/IEC Emission standard for residential, commercial and light-industrial environments conforming to EN/IEC Immunity for industrial environments conforming to NF EN/IEC Standards EN/IEC Product certifications Directives CSA C-Tick GL GOST UL Ambient air temperature for storage C Ambient air temperature for operation C 89/336/EEC - electromagnetic compatibility 73/23/EEC - low voltage directive Relative humidity 95 % at 55 C conforming to IEC Vibration resistance 0.35 mm (f = Hz) conforming to IEC gn (f = Hz) conforming to IEC Shock resistance 5 gn conforming to IEC IP degree of protection IP20 (terminals) conforming to IEC IP30 (casing) conforming to IEC Pollution degree 3 conforming to IEC Dielectric test voltage 2 kv AC 50 Hz, 1 min conforming to IEC kv AC 50 Hz, 1 min conforming to IEC Non-dissipating shock wave 4 kv conforming to IEC kv conforming to IEC kv conforming to IEC

3 Offer Sustainability Sustainable offer status RoHS (date code: YYWW) REACh Product environmental profile Product end of life instructions Green Premium product Compliant - since Schneider Electric declaration of conformity Schneider Electric declaration of conformity Reference not containing SVHC above the threshold Reference not containing SVHC above the threshold Available End of life manual Available Contractual warranty Warranty period 18 months 3

4 Dimensions Drawings Single-Phase and DC Voltage Control Relays Dimensions and Mounting 4

5 Connections and Schema Single-Phase and DC Voltage Control Relays Wiring Diagram 5

6 Connections and Schema Application Scheme (1) To sensitive loads 6

7 Technical Description Function Diagrams Undervoltage Control Without memory ("No Memory" mode) With memory ("Memory" mode) Overvoltage Control Without memory ("No Memory" mode) With memory ("Memory" mode) Legend Tt Time delay after crossing of threshold Un Nominal supply voltage U Monitored supply voltage H Hysteresis U> Overvoltage threshold U< Undervoltage threshold 11-12, Output relay connections (refer to Connections and Schema) Relay status: black color = energized. NOTE: In "Memory" mode, the relay opens when crossing of the threshold is detected and then stays in that position. The power supply voltage must be switched off to reset the product. 7