User Manual CV-87K. PS/2 extender over cat.x. rev: Made in Taiwan

Transcription

1 User Manual CV-87K PS/2 extender over cat.x rev: Made in Taiwan

2 Safety and Notice The CV-87K PS/2 extender over cat.x has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the CV-87K should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. Follow all instructions and warnings marked on this unit. Do not attempt to service this unit yourself, except where explained in this manual. Provide proper ventilation and air circulation and do not use near water. Keep objects that might damage the device and assure that the placement of this unit is on a stable surface. Use only the power adapter and power cords and connection cables designed for this unit. Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning. TABLE OF CONTENTS INTRODUCTION... 1 FEATURES... 1 PACKAGE CONTENTS... 1 SPECIFICATIONS... 2 PANEL DESCRIPTIONS... 3 HARDWARE INSTALLATION... 4 CONNECTION DIAGRAM... 4 NOTICE... 5 PERFORMANCE GUIDE... 5 WARRANTY... 6

3 INTRODUCTION The CV-87K PS/2 extender over cat.x boosts up your keyboard and mouse control distance up to 300m (1000ft). With single cost effective CAT-5 cable, users can readily prolong keyboard and mouse access to PC to increase application flexibility. Typical applications include digital signage, education and demonstration system, and home theater. CV-87K includes two units: transmitting (CV-87K [Tx]) and receiving (CV-87K [Rx]) units and they are switchable. Equipped with popular VGA or DVI extender, CV- 87K offers the best solution for remote control of PC in terms of stability, quality, cost, and transmission distance! FEATURES PS/2 compatible Super long extension distance Single power supply Easy to install Wall mounting housing design for easy and robust installation i The length depends on the characteristics and quality of the cables. Higher resolutions and longer transmission distances require low skew cables (<25ns/100m) for best performance. Unshielded CAT6 with metal RJ-45 connectors is recommended. PACKAGE CONTENTS 1x CV-87K [TX & RX] 2x DC 5V 2A wall wart 1x User Manual 1

4 SPECIFICATIONS Model Name CV-87K Technical CV-87K[Tx] CV-87K[Rx] Role of usage Transmitter [TX] Receiver [RX] Support ESD protection PS/2 Human body model ±19kV [air-gap discharge] & ±12kV [contact discharge] Input 2x PS/2 1x RJ-45 Output 1x RJ-45 2x PS/2 RJ-45 connector PS/2 connector WE/SS 8P8C with 2 LED indicators Mini DIN-6 Mechanical Housing Dimensions [L x W x H] Metal enclosure Model TBA Package 270 x 175 x 80mm [10.6" x 6.9" x 3.1"] Carton 450 x 370 x 300mm [1'6" x 1'3" x 11.8"] Weight Fixedness Power supply Model Package TBA TBA Wall-mounting case with screws upon request Inter-locked 5V 2A DC Power consumption Operation temperature Storage temperature Relative humidity 1 Watts [max] 0~40 C [32~104 F] -20~60 C [-4~140 F] 20~90% RH [no condensation] 2

5 PANEL DESCRIPTIONS Transmitting unit CV-87K-TX Front Panel Rear Panel PS/2 Keyboard: Connect to a PS/2 keyboard 2 PS/2 Mouse: Connect to a PS/2 mouse 3 RJ-45: Plug in a CAT-5/5e/6 cable that needs to be linked to the RJ-45 connector of the matched unit 4 +5V DC power jack: connect to 5V DC power supply Receiving unit CV-87K-RX Front Panel Rear Panel PS/2 Keyboard: Connect to a PS/2 keyboard 6 PS/2 Mouse: Connect to a PS/2 mouse 7 RJ-45: Plug in a CAT-5/5e/6 cable that needs to be linked to the RJ-45 connector of the matched unit 8 +5V DC power jack: connect to 5V DC power supply 3

6 HARDWARE INSTALLATION 1. Connect the PS/2 keyboard and mouse to the transmitting unit. 2. Connect the receiving unit to the computer with PS/2 connection. 3. Connect one Cat-5/5e/6 cable between the transmitting and receiving unit. 4. Make sure your Cat-5/5e/6 cables are tightly connected and not loose. 5. Plug in 5V DC power cord to the power jack. CONNECTION DIAGRAM 4

7 NOTICE 1. The transmission length is largely affected by the type of Cat-5/5e/6 cables, the type of keyboard and mouse sources, and PCs. The testing result shows solid UTP cables (usually in bulk cable 300m/1000ft form) can transmit a lot longer signals than stranded UTP cables (usually in patch cord form). Shielded STP cables are better suited than unshielded UTP cables. A solid UTP Cat-5e cable shows longer transmission range than stranded STP Cat-6 cable. For long extension applications, solid UTP/STP cables are the only viable choice. 2. EIA/TIA-568-B termination (T568B) for LAN cables is recommended for better performance. 3. To reduce the interference among the unshielded twisted pairs of wires in Cat-5/5e/6 cable, one can use shielded STP cables to improve EMI problems, which is worsen in long transmission. 4. Because the quality of the Cat-5/5e/6 cables has the major effect on how long the transmission limit can achieve and how good is the received picture quality, the actual transmission range is subject to one s choice of Cat-5/5e/6 cables. PERFORMANCE GUIDE Performance rating Type of category cable Wiring Shielding CAT5 CAT5e CAT6 Solid Stranded Termination Unshielded (UTP) Shielded (STP) Unshielded (UTP) Shielded (STP) Please use EIA/TIA-568-B termination (T568B) at any time 5

8 WARRANTY The SELLER warrants the CV-87K PS/2 extender over cat.x free from defects in the material and workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer. Should this product fail to be in good working order within 1 year warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit has not been subjected to accident, disaster, abuse or any unauthorized modifications including static discharge and power surge. This warranty is offered by the SELLER for its BUYER with direct transaction only. This warranty is void if the warranty seal on the metal housing is broken. Unit that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair. Such repairs are warranted for 90 days from the day of reshipment to the BUYER. If the unit is delivered by mail, customers agree to insure the unit or assume the risk of loss or damage in transit. Under no circumstances will a unit be accepted without a return authorization number. The warranty is in lieu of all other warranties expressed or implied, including without limitations, any other implied warranty or fitness or merchantability for any particular purpose, all of which are expressly disclaimed. Proof of sale may be required in order to claim warranty. Customers outside Taiwan are responsible for shipping charges to and from the SELLER. Cables and power adapters are limited to a 30 day warranty and must be free from any markings, scratches, and neatly coiled. The content of this manual has been carefully checked and is believed to be accurate. However, The SELLER assumes no responsibility for any inaccuracies that may be contained in this manual. The SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical information contained herein regarding the CV-87K features and specifications is subject to change without further notice. 6