Products for increased power system availability
|
|
- Clarence Cannon
- 5 years ago
- Views:
Transcription
1 Products for increased power system availability P R O D U C T G U I D E
2 Fault detectors and protective relays Protrol s products are designed for reliable and cost-effective performance monitoring and fault detection in everything from small rural substations to urban distributions centers. All products employ a patented method for earth fault detection. The sensitivity is comparable with the best protective relays. FAULT DETECTORS IPC is a fault detector for overcurrent and earth faults with integrated RTU functionality. For remote control, there is a choice between RS485, optical fiber, and Ethernet. IEC /104 are the standard protocols. The new generation (IPC4010, IPC4011 and IPC4012) is prepared for fast automatic fault disconnection and power restoration in self-healing applications. IPC40x0 Art.nr binary inputs. 6 binary outputs. Three-phase current measurement 1/5 A. Overcurrent %, s. Earth fault A, s. Non-directional earth fault A. Power supply V DC. Communication through signal cable with built-in RS485-modem. The RP570 protocol is optional. IPC4010 Art.nr Similar to IPC40x0 plus 2 overcurrent steps. More powerful relays for the maneuvering of switching devices. IPC4011 Art.nr Like IPC4010 but with communication through optical fiber (single mode max. 15 km). Automation for self-healing grid is optional. IPC4012 Art.nr Like IPC4011 but with Ethernet communication interface, IEC
3 IPS is a simpler version of fault detector for overcurrent and earth faults. It indicates locally (with LED) and is suitable for substations that have no communication or where there is an RTU. IPS2 has additional setting possibilities and faster fault indication, suited for networks with distributed generation or when there is a need for fast redistribution choose between flashing LED or closing contact. Or choose both. IPS is designed to function maintenance-free for many years. Fault indication with LED will function 24 hours after the detection of fault thanks to built-in ultra capacitors. Battery backup is not needed for IPS. IPS Light Art.nr Fault indication with flashing LED (LED unit included). When the detector registers a short circuit or earth fault, it will signal with flashing red colour. If no fault is registered, it will signal with flashing green colour. The LED indicates only when the feeder has been disconnected. The light is visible outside the station, which means you can immediately see between which substations the fault is located. Can be complemented with relay unit (Art.nr ) if a signal indication is needed. Overcurrent 130 %, 60 ms. Earth fault 1 A, 60 ms. (for CT ratio 300/1). Power supply 230 V AC. IPS Relay Art.nr Fault indication with closing contact. Otherwise identical to IPS Light. IPS2 Art.nr Fault indication with both closing contact and LED (optional accessory). Overcurrent settings in several steps. Earth fault settings in several steps. Fast fault detection and more powerful relay enable local fault disconnection. RELAY PROTECTION PPC is a complete relay protection device for OHL and cables on the distribution level. The non-directional earth fault function is complemented with Protrol s measurement method for earth fault detection. This means it can be used in stations that have no voltage measurement. The method also assures secure detection of intermittent earth faults. If you have problems with intermittent earth faults, PPC can also be used as back-up protection next to already existing protection in feeders. PPC will step in where your earthfault detector fails. PPC Art.nr step overcurrent protection, direct and inverse time. Directional and non-directional earth fault, neutral over-voltage and Protrol s earth fault detection method. AR. Power supply V DC.
4 Control, monitoring and communication Protrol provides modularised remote terminal units with complete communication alternatives. CONTROL AND MONITORING PDC is a small DIN bar-mounted RTU with scalable architecture. One, two, five, or 14 expansion modules you mount as many as you need. PDC is complemented with communication interface depending on remote protocol. PDC is cost-effective in everything from small distributions centers to the smallest substations. In small stations, the base module may be sufficient. Should the need of I/O increase in the future, PDC can easily be complemented with more modules. The base module supplies the expansion modules with power. These are available for binary inputs and outputs and for analogue inputs. All in- and outputs have LED indications. The base module has 7 binary inputs, 3 binary outputs and one analogue input. Power supply V DC. PDC can be expanded with up to 14 modules. Remote protocol IEC /104 or RP570. PDC Art.nr Expansion modules PBI Art.nr binary inputs ( VDC) PBO Art.nr binary outputs PAI Art.nr analogue inputs (0/4-20 ma)
5 COMMUNICATION The product group includes different types of modems and interface converters. LSR is a combined Modem, Line Splitter and Repeater. There are two options for communication, RS232-2 x RS485 or RS485-2 x RS485. The RS485 ports can be configured for either 2- or 4-wire. Several LSR units can be stacked for division into more than two transceiver networks. LSR Art.nr RS232-2 x RS485-modem. Art.nr RS485-2 x RS485-repeater. PxM Art.nr PxM is a RS232/RS485- modem of the same design as PDC. Can be connected directly to PDC but also works as independent modem for RS232 to RS485. Power supply V DC. PxC Art.nr PxC485 is a compact RS485- modem for PDC. Art.nr PxC232 is a compact and isolated RS232-interface for PDC. PEC104 Art.nr Ethernet IEC104 connectvity. Art.nr Gateway, Ethernet IEC104 connectvity. PEC104 is an intelligent interface for the remote protocols IEC and IEC With PEC104 IEC101 nodes can be connected to remote control via Ethernet and IEC104. The serial interface for PEC104 is either an isolated RS232 via the expansion bus, or RS485 via pluggable terminals. RS232 will typically be used with Protrol s RTU system when only one RTU will be connected. Power supply V DC. PEC104 can be configured to three basic modes: transparent, gateway or stand-alone mode. For detailed info about these configurations, see product sheet. OTR is a fiber-optic modem for single-mode fiber. The advantage with communication via optic fiber is that it is in principle insensitive to external disturbances. The modem is designed to function transparently for IEC with low speeds. It means, for example, that you can use OTR on sections in RS485 networks where you have access to fiber. OTR has a transceiver for connection in ring (see picture). OTR Art.nr Fiber-optic modem for single-mode fiber. Power supply V DC.
6 Power supply, accessories and software POWER SUPPLY Protrol provides several power supply alternatives. PBU Art.nr Backup power supply with super capacitors. Typical operating time after power failure with an IPC40x0 is 5 minutes. Power supply 230 V AC. Battery chargers Art.nr V, 2.5A. Art.nr V, 5A. Art.nr V, 5A. Battery Art.nr V, 7Ah, longlife. OTHER OVP is a DIN bar-mounted overcurrent protection device intended for RS485 with low and medium communication speed or power supply protection. OVP Overcurrent protection device for RS485 communication. Art.nr OVP Overcurrent protection device for external 48 V DC power supply. Art.nr IPS RU Relay unit to IPS Light. Power supply V DC. Art.nr External LED unit LED for IPS2 Art.nr
7 ACCESSORIES Current transformers * Split-core current transformer, 150/1A Art.nr Split-core current transformer, 300/1A Art.nr Split-core current transformer, 300/1A for cables with larger cross section area. Art.nr Solid-core current transformer, 150/1A. Art.nr Solid-core current transformer, 300/1A. Art.nr * Other ratios can be delivered on request. SOFTWARE USB service port cable USB cable for service port, type B Art.nr USB cable for service port, mini type B Art.nr As a Protrol customer you will also have access to our software, which helps you install, configure, and diagnose your products and system: Protrol-tool. We also supply necessary USB drivers, configuration tools for PEC104, and tools for change of firmware. You will find more information about our products on: Technical data sheets can also be downloaded.
8 Welcome to Protrol Protrol is a development- and consulting company within power and automation technologies. Protrol s products are developed for cost-effective performance monitoring and fault detection in everything from small rural substations to urban distribution centers. The products build on patent protected technology. Protrol offers expertise within several fields, focusing on HVDC, wind power and electric power distribution. Protrol s customers are mainly in the power companies, utilities and industries. Protrol AB, Ullevigatan 19, SE Göteborg, Sweden Phone: info@protrol.se
Recloser Controller for feeder protection and automation siemens.com/distribution-automation
SIPROTEC 7SC80 Control Controller for feeder protection and automation siemens.com/distribution-automation SIPROTEC 7SC80 Control Designed for feeder automation applications This solution allows very fast
More informationSigbert Reimann, Remote Control Forum, Datum 9. October 2013 RTU - Review and News. ABB Network Management Forum December 10, 2013 Slide 1
Sigbert Reimann, Remote Control Forum, Datum 9. October 2013 RTU - Review and News ABB Network Management Forum December 10, 2013 Slide 1 Content Overview over the RTU500 series Product News New CMU in
More informationSIPROTEC 7SC80 Feeder Protection and Automation Answers for infrastructure and cities.
www.siemens.com/protection SIPROTEC 7SC80 Feeder Protection and Automation Answers for infrastructure and cities. designed for feeder automation applications This solution allows very fast fault detection
More informationPerfect protection smallest space
www.siemens.com/energy/protection Perfect protection smallest space The SIPROTEC Compact device range redefines protection technology Answers for energy. SIPROTEC Compact is the ideal solution for almost
More informationMiCOM P111. Three phase and earth fault overcurrent relays
Three phase and earth fault overcurrent relays The relays are suitable for all the application where overcurrent and/or earth-fault protection are required. Thanks to its favorable price vs technical features
More informationSubstation Automation Products. High impedance differential busbar protection REB650 Relion 650 series
Substation Automation Products High impedance differential busbar protection REB650 Relion 650 series One IED for a wide range of high impedance differential protection applications ABB introduces a new,
More informationAn expert solution is within your reach. EORSys. We take care of it.
We take care of it. EORSys An expert solution is within your reach. System solution for compensated, isolated and solidly grounded grids Precise control of arc suppression coils Reliable locating of earth
More informationProducts Portfolio. Pole mounted Vacuum Recloser
Products Portfolio Pole mounted Vacuum Recloser Efacec Switchgear Efacec Switchgear is a leading company in Portugal and a worldwide reference in the development of solutions for power generation, transmission,
More informationMW/MVAR Transducer Specifications
GUARANTEED TECHNICAL PARTICULARS (To be submitted by bidder with the tender) MW/MVAR Transducer Specifications Sr.No. Descriptions Details Offered by supplier 1 2 3 4 Transducer suitable for Input Output
More informationRTU560 Connections and Settings DIN Rail RTU 560CIG10
Connections and Settings DIN Rail RTU 560CIG10 Application, characteristics and technical data have to be taken from the hardware data sheet: 560CIG10 1KGT 150 719 Operation The 560CIG10 is a DIN rail
More informationRTU560 Remote Terminal Unit Connections and Settings
Remote Terminal Unit Connections and Settings Communication Unit 560CMG10 Application, characteristics and technical data have to be taken from the hardware data sheet: 560CMG10 1KGT 150 645 Operation
More informationDigital Grid Products At a Glance Protection, Substation Automation, Power Quality
Digital Grid Products At a Glance Protection, Substation Automation, Power Quality siemens.com/digitalgrid Digital Grid Products Broadest portfolio strong brands Substation Automation, RTU s Power Quality
More informationOvercurrent and Arc Protection by Reyrolle Alexander Erokhin. 21, 2017 I Berlin
Overcurrent and Arc Protection by Reyrolle Alexander Erokhin VAR Partner Day September 20-21, 21, 2017 I Berlin Reyrolle Product Range by SIEMENS Challenges We Meet for our Customers Easy-to-use protection
More informationMehta Tech, Inc. TRANSCAN IED For Multi-Function, Multi-Speed Recording
Mehta Tech, Inc. TRANSCAN IED For Multi-Function, Multi-Speed Recording Two independent, simultaneously operating recorders in one package Triggering on input quantities and calculated values, such as
More informationSubstation monitoring and control
Substation monitoring and control Part 3. Substation Automation Author Peter Johansen, www.jomitek.dk In the preceding 2 articles the topics of measurement techniques for voltage and current has been covered.
More informationG - Base. Relays THREE PHASE + NEUTRAL CURRENT PROTECTION RELAY
44 Relays G - Base THREE PHASE + NEUTRAL CURRENT PROTECTION RELAY General Characteristics G-Base is the new generation of Microelettrica Scientifica s base-performance protection relays. This range is
More informationTFS 2100 Traveling Wave Fault Location System
Traveling Wave Fault Location System The most accurate overhead transmission and distribution line fault locator Accuracy: ±150m typical regardless the line length Unaffected by fault resistance Suitable
More informationProducts for digital substations SIPROTEC 6MU805. Merging Unit for conventional instrument transformer. Integrated PRP, HSR. siemens.
Products for digital substations SIPROTEC 6MU805 Merging Unit for conventional instrument transformer Integrated PRP, HSR siemens.com/processbus built to create digital substations based on IEC 61850-9-2
More informationSIPROTEC 7SC805. Merging Unit for conventional instrument transformer. Products for digital substations.
Products for digital substations SIPROTEC 7SC805 Merging Unit for conventional instrument transformer Integrated PRP, HSR www.siemens.com/processbus built to create digital substations based on IEC 61850-9-2
More informationDRTS 64. The new generation of advanced test equipment for Relays, Energy meters, Transducers and Power quality meters.
The new generation of advanced test equipment for Relays, Energy meters, Transducers and Power quality meters Testing all relay technologies: electromechanical, solid state, numerical and IEC61850 Manual
More informationSICAM A8000 Series. Operation, telecontrol, and automation in the smallest spaces. siemens.com/sicam-a8000
SICAM A8000 Series Operation, telecontrol, and automation in the smallest spaces siemens.com/sicam-a8000 4 Applications 5 Scalability in the application 6 Highlights at a glance 8 The entire product family
More informationSubstation Automation Products. Generator protection REG670/650 Relion 670 and 650 series
Substation Automation Products Generator protection REG670/650 Relion 670 and 650 series A new protection standard for your valuable assets Based on ABB s extensive experience, REG670 and REG650 IEDs (Intelligent
More informationRemote communication options include IEC Ethernet communications or Modbus (RS485).
2019 The MELPRO D series relay is suitable for feeder protection, motor protection and transformer protection applications. The relay offers multiple step time grading for over-current protection co-ordination.
More informatione 2 TANGO -400 Overcurrent Relay K Catalogue EN
e 2 TANGO -400 Overcurrent Relay K-33.1.3 Catalogue EN We Create Ideas With Power! e 2 TANGO-400 protection relay is a solution developed by ELEKTROMETAL ENERGETYKA SA R&D department consisting of engineers
More informationGE Power Management. UR F60 Feeder Management Relay An integrated feeder protection and metering solution
UR An integrated feeder protection and metering solution Power to Manage your Facility Connectivity ModBus RTU MMS/UCA2 TM Protocols SI Compatibility Flexibility FlexCurves FlexLogic The first Relay designed
More informationSICAM Products and Solutions for Energy Automation
SICAM Products and Solutions for Energy Automation Manfred Haslinger, Product Lifecycle Manager SICAM RTUs Josef Müllner, Product Lifecycle Manager SICAM TOOLBOX II siemens.at/future-of-energy SICAM Products
More informationEXOcompact. Freely programmable controller
flik plats revision 0 710 12 2005 EXOcompact Freely programmable controller A small and compact controller in three different I/O sizes and with different kinds of communication, with or without internal
More informationNTX Series Product Comparison
NTX Function Primary design application Pole-top/pad-mount switch automation; small substation installations Small substation installations with medium serial and Ethernet port requirements Some legacy
More informationFiber Optic Selector Guide for PLC & Serial Communication Networks
Fiber Optic Selector Guide for PLC & Serial Communication Networks Electrical Interface Modules Optical Interface Modules Power Supply Modules Self-Healing Ring Modules www.ultra-nspi.com EOTec 2000 Self-Healing
More informationNEO 3000 Substation System THE FAMILY OF EQUIPMENT DEDICATED FOR POWER UTILITIES. Energy Sector
THE FAMILY OF EQUIPMENT DEDICATED FOR POWER UTILITIES Introduction The supply of electrical energy occupies an important position in the life of modern society. Operation of commerce, industry, transport,
More informationVersaMax Micro and Nano Technical Product Presentation
VersaMax Nano VersaMax Micro VersaMax Micro and Nano Technical Product Presentation Outline Introduction VersaMax Micro and Nano Product Strategy Future Products Product Description VersaMax Nano VersaMax
More informationJehanpour Ranjkesh, Integrator Partner Seminar 2012 Station level product news Automation Controller COM600
Jehanpour Ranjkesh, Integrator Partner Seminar 2012 Station level product news Automation Controller COM600 Contents COM600 Product Overview Business Overview Product News Overview June 12-14, 2012 Slide
More informationDGSZV-EP DIGITAL GALVANIC LONGITUDINAL DIFFERENTIAL PROTECTION. Application field
DGSZV-EP DIGITAL GALVANIC LONGITUDINAL DIFFERENTIAL PROTECTION The digital galvanic longitudinal differential protection of type DGSZV-EP is part of device family named EuroProt. This short description
More informationCABLETROLL 3 CABLETROLL CABLETROLL CABLETROLL CABLETROLL LED-2 5 CABLETROLL CABLETROLL REMOTE INDICATION 7
CABLETROLL 3 CABLETROLL 2310 4 CABLETROLL 2320 4 CABLETROLL 2330 5 CABLETROLL 2350 5 LED-2 5 CABLETROLL 2410 6 CABLETROLL 2440 6 REMOTE INDICATION 7 The CableTroll indicators are fault current detectors
More informationDRTS 33. The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters
The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters Testing all relay technologies: electromechanical, solid state, numerical and IEC61850 Manual
More informationAC5160 SiPass integrated controller kit
AC5160 SiPass integrated controller kit SiPass integrated Wall housing with pre-assembled basic SiPass integrated components Equipped with one ACC (AC5100), two dual reader interfaces (ADD5100) and one
More informationFC724 Fire control panel
FC724 Fire control panel Series FS720 (MP3.0) Cerberus PRO Compact, prefabricated microprocessor-controlled fire control panel for the connection of up to 504 addresses Fire control panel can be used as
More informationPOWER GRID AUTOMATION. Pág.. n. RMU Automation
POWER GRID AUTOMATION RMU Automation Distribution Network Non-Controlled Secondary Distribution Systems Distribution Network RMU Automation - Levels RMU Automation - RTU / FRTU SMART CONTROLLER Monitoring
More informationIEC-4001/4002/4301. Quick Installation Guide. Industrial mini Media Converter 10/100Base-TX to 100Base-FX. v
IEC-4001/4002/4301 Industrial mini Media Converter 10/100Base-TX to 100Base-FX Quick Installation Guide v1.00-1402 Overview LevelOne IEC-4001/4002/4301 is an industrial Fast Ethernet media converter with
More informationRelion 615 series Line Differential Protection and Control RED615 Ver. 2.0 Technical Presentation
Relion 615 series Line Differential Protection and Control RED615 Ver. 2.0 Technical Presentation ABB Oy Distribution Automation July 1, 2009 1MRS756504 B Slide 1 Contents RED615 Technical Presentation
More informationDRTS 33. The new generation of advanced three phase relay test set
The new generation of advanced three phase relay test set Testing all relay technologies: electromechanical, solid state, numerical and IEC61850 Local control with color display Simultaneously available:
More informationBST BuildingSystemsTrainer
_SMARThome _SMARThome Three-Phase Network Analyzer Board Smart Metering Photovoltaic modul Counter Smart Meter 01 05 Wind power Counter 01 Solar array Backup system Photovoltaic On Grid DC Feeding SCADA
More informationReal-Time Automation Controller (RTAC) Powerful, reliable, and secure multifunction controller
SEL-3530 Real-Time Automation Controller (RTAC) Powerful, reliable, and secure multifunction controller Versatile RTAC operates as a supervisory control and data acquisition (SCADA) remote terminal unit
More informationTX-I/O Product Range. Description. Technical Specification Sheet Document No July 18, 2013
Technical Specification Sheet Document No. 149-476 July 18, 2013 TX-I/O Product Range TX-I/O is a range of I/O modules, with associated power and communication modules, for use within the APOGEE Automation
More informationGRID/PRSHT/MU320/EN/1.2014/GBR/1894 ALSTOM All rights reserved.
GRID/PRSHT/MU320/EN/1.2014/GBR/1894 ALSTOM 2014. All rights reserved. GRID/PRSHT/MU320/EN/1.2014/GBR/1894 ALSTOM 2014. All rights reserved. MEASUREMENT PRODUCT SOLUTIONS Reason RPV311 Digital fault recorder
More informationhorizontal and vertical bargraph channel display of a group with units and scalabled plus standardized measured values
Multichannel Process Display TFT with Contacts, Analogue Outputs and Datalogger Functional range standard configuration of max. 60 channels via inputs, outputs, mathematical / logical functions, controller,
More informationVMU-C/Y, Em 2 CARLO GAVAZZI. The evolution in Energy Management. Monitoring system for Energy Management. A u t o m a t i o n C o m p o n e n t s
CARLO GAVAZZI A u t o m a t i o n C o m p o n e n t s VMU-C/Y, Em 2 The VMU-C EM is the ideal web-server based solution for monitoring small to medium size installations. With its integrated M2M functionalities
More informationXPSMF35. Product data sheet Characteristics. Preventa safety PLC compact - Profibus DP protocol. Main. Complementary. Safety module name
Product data sheet Characteristics XPSMF3542 Preventa safety PLC compact - Profibus DP protocol Main Range of product Product or component type Safety module name Safety module application Nov 13, 2018
More informationHot pluggable communication modules
precision metering series in-built IEC 61850 support Best in class accuracy User friendly multilingual display Field con gurable for various installations Hot pluggable communication modules Prometer 100,
More informationMake the sun your energy source. SOLAR
Make the sun your energy source. sinvert SOLAR Roll, connect and play Siemens SINVERT solar units are very quickly operational: roll the unit into place, make the DC and three-phase connections, switch
More informationSouthern Avionics Company
Southern Avionics Company Ethernet Connection Options - NAVTEX SPECIFICATION SHEET 5055 Belmont, Beaumont, TX 77707 Phone +409.842.1717/1.800.648.6158 (Toll Free in the US) Fax +409.842.2987 sales@southernavionics.com
More informationThe PowerLogic range. Gain energy insight and control
The PowerLogic range Gain energy insight and control The PowerLogic advantage PowerLogic is the world's largest and most advanced range of software and metering products for managing energy, giving suppliers
More informationBusbar protection REB 670
Gunnar Stranne Busbar protection REB 670 Rio de Janeiro April 23-25, 2006 ABB Power Technologies AB 2 3 4 REB 500 is enabled for use with IEC61850 communication Benefits of REB 670 outstanding features
More informationSub-Station Station. Secondary Sub. Sub- Distribution. Network. Distribution Panel. Distribution. Panel
DLC-200 BOX Mini-RTU for Multi Utility and Pipeline Purposes Our strength Low Cost Your benefit! High Performance Only a few types of different modules Simplified cost-effective spares inventory and modular
More informationDRTS 3 PLUS Advanced Protection Relay Test Set and Measurement System
Advanced Protection Relay Test Set and Measurement System Multi-tasking equipment designed for testing protection relays, energy meters, transducers Particularly designed to test RTU (remote terminal unit)
More informationDRTS 66 can test all the following relays
Testing all relay technologies: electromechanical, solid state, numerical and IEC61850 Manual control with color display Simultaneously available: 6 Current and 6 Voltage plus 1 battery simulator outputs
More informationDKG-210 UNIVERSAL INTERNET GATEWAY UNIT
DKG-210 UNIVERSAL INTERNET GATEWAY UNIT AC & DC SUPPLY VERSIONS DESCRIPTION The DKG-210 is designed for internet monitoring and control of industrial devices using different protocols through the RAINBOW
More informationRT4F-120V/20A-WAC RECTIFIER
The RT4F-120V/20A-WAC is a switched mode rectifier/charger module designed to provide up to 20A of output current into a 120V nominal system. This charger has been designed for use in conjunction with
More informationProduct Sheet ECO. Types ECG, AMF Technical data. product sheet eco ecg-amf - technical data gb v1.0.docx
ECO Types ECG, AMF Technical data Product overview ECO ECG and ECO AMF are microprocessor controlled devices for use in low voltage single genset applications for standby power generation. The front-side
More informationDRTS 3 PLUS. Advanced Protection Relay Test Set and Measurement System. DRTS 3 PLUS has been designed to test:
Advanced Protection Relay Test Set and Measurement System Multi-tasking equipment designed for testing protection relays, energy meters, transducers Particularly designed to test RTU (remote terminal unit)
More informationAutomation Unit TM 1703 ACP. SICAM 1703 flexible for all applications. Answers for energy.
Automation Unit SICAM 1703 flexible for all applications Answers for energy. Outstanding performance: Rising demands for efficiency in nearly all processes require increasingly innovative automation solutions
More informationEARTH-FAULT AND SHORT-CIRCUIT INDICATOR TYPE EKL8001 / EKL8002 surface mounted
EARTH-FAULT AND SHORT-CIRCUIT INDICATOR TYPE EKL8001 / EKL8002 surface mounted General description The earth-fault and short-circuit indicators type EKL8001 and type EKL8002 can be used in radial networks
More informationDIGITAL RELAY OF PROTECTION AND AUTOMATION SERIES PC83 AND PC830
DIGITAL RELAY OF PROTECTION AND AUTOMATION SERIES PC83 AND PC830 PC83 and PC830 series devices are designed to perform the relay protection functions and 6-154 kv networks automation, have different functionality
More information2 NOVATECH. This page is intentionally left blank.
NovaTech Orion I/O 2 NOVATECH This page is intentionally left blank. ORION I/O 3 NovaTech Orion I/O Overview NovaTech Orion I/O is an extension of the family of OrionLX Automation Platforms for substation
More informationFC722 Fire control panel
FC722 Fire control panel Series FS720 (MP3.0) Cerberus PRO Compact, prefabricated microprocessor-controlled fire control panel for the connection of up to 252 addresses Fire control panel can be used as
More informationiswitch imotor Compact QR
PRODUCT DATA SHEET iswitch imotor Compact QR Features: Compact design Fit for purpose Suitable for 2 feeder switches Quick Release for manual operation High operation torque Operation monitoring (max.
More informationTX-I/O Product Range. Description. Technical Specification Sheet Document No February 20, 2018
Technical Specification Sheet Document No. 149-476 February 20, 2018 TX-I/O Product Range TX-I/O is a range of I/O modules, with associated power and communication modules, for use within the APOGEE Automation
More informationSEL-487B. A Powerful Solution for Busbar Differential Protection. Bus Differential and Breaker Failure Relay
Bus Differential and Breaker Failure Relay A Powerful Solution for Busbar Differential Protection Features and Benefits Select the for the differential protection of busbar systems with up to 18 terminals.
More informationS800 I/O ABB Automation
S800 I/O 3BCNIIT F HW02-S800-V0102 Rev. 02/01 Page 1 S800 I/O S800 I/O 3 : Fieldbus Communication Interface (FCI) I/O Module Module Termination Unit (MTU), Compact or Extended version 3BCNIIT F HW02-S800-V0102
More informationAccessories / 7XV5820
Accessories / XV0 XV0 industrial modem and modem-router with switch LSP.tif LSP.tif LSP.tif Modem k / ISDN TA Modem /ISDN Router Pocket Modem / ISDN Fig. / Industrial modems Depending on the available
More informationRemote Terminal Unit ER1000 APPLICATION FEATURES
Remote Terminal Unit ER1000 ERL with more than three decades of expertise in Power System Protection have developed state of the art Automation Solutions. The whole family of ERL s Remote Terminal Unit
More informationLecture 5 Substation Automation Systems. Course map
Lecture 5 Substation Automation Systems 1 Course map 2 1 Contents of the Lecture Part 1 Substation Automation Components Substation Automation Functions Communication within the Substation (Intro) Part
More informationEarth-fault Relay SPAJ 110 C. Product Guide
Issued: April 1999 Status: Updated Version: C/12.04.2006 Data subject to change without notice Features Low-set neutral overcurrent stage with definite time or inverse time characteristic High-set neutral
More informationSensitive Earth-fault Relay SPAJ 111 C. Product Guide
Issued: April 1999 Status: Update Version: C/12.04.2006 Data subject to change without notice Features Sensitive low-set neutral overcurrent stage with definite time characteristic High-set neutral overcurrent
More informationIPC40x0 operation manual
The IPC40x0 is a secondary substation fault detector with RTU functionality and a Soft PLC option. All settings and configurations are done through the software Protrol_Tool. Table of contents 1 Hardware...
More informationELG4125: System Protection
ELG4125: System Protection System Protection Any power system is prone to 'faults', (also called short-circuits), which occur mostly as a result of insulation failure and sometimes due to external causes.
More informationSmart Distribution Technology
Smart Distribution Technology Presentation Agenda Alabama Power Company, A Southern Company Distribution Automation Supervisory Control And Data Acquisition (SCADA) Multiple Address System (MAS) communications
More informationAirfield Lighting Control System
Airfield Lighting Control System ALCS Style 2 ALCS Style 3 Reference to Standards ICAO: Annex 14, Volume I, current edition Aerodrome Design Manual, Part 5 FAA: AC 150/5345-56 (current edition) L-890 Airfield
More informationProduct Overview. Features. Send documentation comments to CHAPTER
CHAPTER This chapter provides an overview of the Cisco MDS 9020 Fabric Switch and its physical features: Features, page - Power Receptacle, page -2 Switch LEDs, page -3 Maintenance Button, page -4 Fibre
More informationI/A Series Remote Terminal Unit (RTU) RTU 20 for Oil, Gas, and Water SCADA Applications
I/A Series Remote Terminal Unit (RTU) RTU 20 for Oil, Gas, and Water SCADA Applications RTU 20 OVERVIEW The I/A Series RTU 20 is an Intelligent Remote Device capable of performing a full range of control
More informationRevolutionizing control wiring
SmartWire-DT Panel Wiring Solutions Revolutionizing control wiring 797-6925 Fax: (215) 221-1201 www.royalelectric.com SmartWire-DT Changing the way panels are wired. Reduce cost throughout the value chain.
More informationMIC-2 Multi-instrument DATA SHEET
Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional) Profibus DP (optional) I/O modules
More informationConverter Box Data Sheet
Page 1 from 6 Functions of the converter box The converter box is used to adapt physically two interfaces and to separate them galvanicly. It is configured as follows: Two interface slots can be used to
More informationMega_Link Telemetry Communication System
Mega_Link Telemetry Communication System Overview Mega_Link is a low-cost and versatile telemetry communication system for passing two-way instrumentation, measurement and control data between industrial
More informationAccessories / 7XV5461
Accessories / XV XV two-channel serial optical repeater (for mono-mode FO cable) Fig. / Optical repeater with integrated 0 nm/ nm wave length multiplexer for one single mono-mode FO-cable LSP.tif Function
More informationProtection relays.
Protection relays www.vamp.fi Vamp Ltd Vamp Ltd, with a strong experience of designing devices, is an independent supplier of relays and monitoring equipment. The company has an established reputation
More informationPROTECTION RELAYS THE ULTRA LINE NUMERICAL MULTIFUNCTION INTELLIGENT DEVICE FOR PROTECTION, SUPERVISION, METERING AND CONTROL
MICROPROCESSOR PROTECTION RELAYS THE ULTRA LINE NUMERICAL MULTIFUNCTION INTELLIGENT DEVICE FOR PROTECTION, SUPERVISION, METERING AND CONTROL MICROELETTRICA SCIENTIFICA MANUFACTURES A COMPLETE RANGE OF
More informationPSI-MODEM-SHDSL/SERIAL
PSI-MODEM-/SERIAL -SERIAL permanent line modem Data sheet 104460_en_02 PHOENIX CONTACT 2011-12-06 1 Description The industrial SERIAL permanent line modem enables broadband networking of serial devices
More information////// SUBSTATIONS. Control command and local Scada
////// SUBSTATIONS Control command and local GENERAL INFORMATION The solution provided by Sécheron for local control and monitoring of traction substations is a significant step in supporting operations
More informationEvolution of Control for the Power Grid
Evolution of Control for the Power Grid Anjan Bose Washington State University Pullman, WA, USA PaiFest In Honor of Prof. M. A. Pai Urbana-Champaign, IL October 15, 2015 The Past (before 1960s) Hard
More informationPXR11 PXR12. System controllers DESIGO PX
9 235 DESIGO PX System controllers PXR11 PXR12 For integration of the room controllers in the DESIGO RXC range into the DESIGO building automation and control system (operates as an interface) For the
More informationTWO-WINDING TRANSFORMER DIFFERENTIAL
E3-TR PROTECTION WITH AUTOMATIC VOLTAGE Because of the control, measuring and monitoring functions implemented, the IED can also be used as a bay control unit. The EuroCAP configuration tool, which is
More information100% electricity. Automatic transfer switch controllers ATL series
100% electricity Automatic transfer switch controllers ATL series Automatic transfer switch controllers Keep control around the clock General characteristics Rated auxiliary power supply: 220-230-240VAC
More informationMIC-2 MKII & MIC-2 MKII DIN, Multi-instrument DATA SHEET
& DIN, Multi-instrument DATA SHEET Measurements All 3-phase AC measurements True RMS 4-Quadrant energy Power Quality Analysis Replaces analogue meters RS-485 Modbus RTU protocol TCP/IP Modbus (optional)
More informationFEATURES DESCRIPTION MODEL 110B. Power Supply
FEATURES Extends wiring distance of FT-10 LonWorks Networks. (2) channels using a single Model 110B. Up to 10 channels using (5) Model 110B. Low cost alternative to routers configured as repeaters. Wring
More informationRTU32. Installation and wiring manual. Utility Outstation and Controller. Doc No Version 3.00
Utility Outstation and Controller Installation and wiring manual Doc No 40215 Version 3.00 Regulations for the installation and operation of electrical systems The RTU32 devices are produced under the
More informationSynchronous switching of distribution sub networks
Synchronous switching of distribution sub networks Paul Stergiou ConEdison USA Manuel P Pimenta, - ConEdison USA Sergio A Rodriguez ConEdison USA Thomas Horan ConEdison USA Andre Smit- Siemens Industry
More informationLecture 6 Substation Automation Systems
Lecture 6 Substation Automation Systems 1 Course map 2 Contents of the Lecture Part 1 Substation Automation Components & Architectures Substation Automation Functions Communication within the Substation
More informationMX-Net Inter-Controller Network
MINERVA MX MX-Net Inter-Controller Network Features: Allows MX Fire Controllers to be seamlessly networked together True peer-to-peer communications; no host or master controller required Highly resilient,
More informationProduct Overview. Send documentation comments to CHAPTER
Send documentation comments to mdsfeedback-doc@cisco.com CHAPTER 1 The Cisco MDS 9100 Series Multilayer Fabric Switches provide an intelligent, cost-effective, and small-profile switching platform for
More information