The connector system by Amisco includes a complete range of solutions for the most common connections of the coils for solenoid valves.

Transcription

1 Connector

2 Connector system The connector system by Amisco includes a complete range of solutions for the most common connections of the coils for solenoid valves. The connectors with cable entry conform to Industry Standard EN (formerly DIN 43650) are normally used to supply power to solenoid valves. The connectors are rated to offer protection to IP 65 (complying to IEC 60529) that means reliable performance when exposed to fluids and dust, when correctly assembled with the gaskets and screws which complete the package. The robust one piece contacts are produced in silver plated brass. It has been paid particular attention to the contact with a new design which offers protection between the screw and the wire to prevent damage to the conductors during assembly, and as a result provides a totally secure connection. The circuit diagram is printed externally on top of each connector to assist circuit identification. A mechanical spring offers a secure and robust assembly between the contact holder and housing. On the following pages you will find the technical information necessary for selecting the right option. In the product range you will find optional solutions which include connectors with transparent housing, versions with diodes, varistors or capacitors which offer overvoltage protection. Should you require further information then, please, do not hesitate to contact us. Product features: Robust design with wide space to facilitate cable assembly to the contact One piece contact insert secured by spring loaded lugs Protection spring between fixing screw and contact to prevent conductor damage during assembly Fixing screw end stop to prevent curvature and damage to the housing when assembled Visible external tampo print for identification of circuit type and voltage The Amisco connectors are produced by a leader manufacturer for these products

3 TYPES (also including optional types) Pos. 12 Pos. 6 AMIC AMIC AMIC AMIC AMIC AMIC AMIC AMIC AMIC AMIC AMIC AMIC AMIC AMIC AMIC AMIC ORDERING KEY (also valid for optional types) AMIC Connector type mm - DIN/A 4 Pins mm - DIN/A 3 Pins mm - Industrial 3 Pins mm - DIN/C 4 Pins mm - DIN/C 3 Pins mm - Industrial/C 4 Pins mm - Industrial/C 3 Pins mm - DIN/B 3 Pins Number of conductors 3 3 = 2 poles + earth 4 4 = 3 poles + earth Earth pos.* Gasket 2 12 Profile 3 6 Profile 5 12 Flat 6 6 Flat 7 12 Not included 8 6 Not included * Denotes position installed from factory. The connector position can be rotated during installation ø ø ø B 9 Voltage Components description V Without components V Suppr. Lamp or Rectifier 2 115V Suppr. Lamp or Rectifier 3 230V Suppr. Lamp or Rectifier V Yellow LED 5 115V Yellow LED 6 230V Yellow LED V Red LED 8 115V Red LED 9 230V Red LED A 12-24V Green LED B 115V Green LED C 230V Green LED B A T C P Connector colour Black Grey Transparent White Black 6/6 selfextinguishing Internal circuits 00 Without components T1 Double zener (Transil) L0 Incandescent light T5 Transil & LED L3 Bipolar LED C1 RC circuit L4 Two bipolar LED C5 RC circuit & LED D0 Diode & light S1 Half wave rectifier D1 Diode S5 Half wave rectifier & LED D5 Diode & LED R1 Full wave rectifier V0 Varistor & light R5 Full wave rectifier & LED V1 Varistor P1 2 Colour LED (for switches) PIN 3 = yellow PIN 2 = green V5 Varistor & LED P2 2 Colour LED (for switches) PIN 3 = red PIN 2 = green Cable entry size in Pg Gland nut colour 7 Pg7 Black 9 Pg9 Black 1 Pg11 Black 3 1/2 NPT Not included Fixing screw always included in the connector code

4 Types DIN Form C / INDUSTRIAL Contact spacing 8 mm / 9,4 mm For 15 mm and 17 mm coil types (EVI 9, 15 mm pilot valve) AMIC813 / AMIC Form DIN C / Industrial Cable entry PG 7 (4-6 mm) Protection class IP 65 (mated) IEC Insulation group VDE /89 - Class C Working voltage AC 250 V max. - DC 300 V max. (IEC 664) Nominal current 6A (max. 16A / 40 C) Contact resistance 4 mω Max conductor section 3 x 0,75 mm 2-4 x 0,75 mm 2 Gasket material NBR Fixing screw M2,5 x ± ± ø ± Standard types Contacts Cable Type Black 2 + GND 4 6 mm - PG7 8,0 mm AMIC B7 2 + GND 4 6 mm - PG7 9,4 mm AMIC B7 Other types on demand

5 Types INDUSTRIAL Contact spacing 11 mm For 22 mm coil types (EVI 7/9, EVI 7/8, EVI 7/10) AMIC Form Industrial Cable entry PG 9 (6-8 mm) Protection class IP 65 (mated) IEC Insulation group VDE /89 - Class C Working voltage AC 250 V max. - DC 300 V max. (IEC 664) Nominal current 10A (max. 16A / 40 C) Contact resistance 4 mω Max conductor section 3 x 1,5 mm 2 Gasket material NBR Fixing screw M3 x ± ± ± ± ± ±0.1 Standard types Contacts Cable Black 4 6 mm - PG7 AMIC B7 2 + GND 6 8 mm - PG9 AMIC B9 Other types on demand

6 Type DIN Form A Contact spacing 18 mm For 30 mm coil types (EVI 30, EVI 5, EVI 3) AMIC Form DIN A Cable entry PG 9 (6-8 mm) - PG 11 (8-10 mm) Protection class IP 65 (mated) IEC Insulation group VDE /89 - Class C Working voltage AC 250 V max. - DC 300 V max. (IEC 664) Nominal current 10A (max. 16A / 40 C) Contact resistance 4 mω Max conductor section 3 x 1,5 mm 2-4 x 1,5 mm 2 Gasket material NBR Fixing screw M3 x ø Standard types Contacts Cable Black mm - PG9 AMIC B9 2 + GND mm - PG11 AMIC B1 Other types on demand

7 Connector circuits specifications for optional versions (Examples) DESCRIPTION DIAGRAM L3 Bipolar LED indicator, indicates supply voltage. For DC and AC voltage application. D5 LED indicator, indicates supply voltage. Diode as over voltage protection. For DC voltage application. + - V5 Bipolar LED indicator, indicates supply voltage. VDR as over voltage protection. For DC and AC voltage application. T5 Bipolar LED indicator, indicates supply voltage. Bipolar zener diode as over voltage protection. For DC and AC voltage application. R5 Full wave rectifier and LED indicator for supply voltage. VDR as over voltage protection. Nominal current 1A at 40 C ambient temperature. For AC application useful

8 AMISCO S.p.A. Via Piaggio, Paderno Dugnano (Mi) Italy Tel Fax Rev. 03/2019