CPU. Intel Atom N455 Processor LAN. 2 x Intel 82583V PCIe Gigabit Ethernet

Transcription

1 8 EmModule-7E Wide Range Temperature PC/0 CPU Module Quick Installation Guide Version.0 Form Factor PC/0 CPU Module CPU Intel Atom N Processor Chipset Intel ICH8M Video Analog RGB/ Single Channel 8-bit LVDS LAN x Intel 88V PCIe Gigabit Ethernet I/O PC0 / USB / SATA / COM / CompactFlash Type II Technical Support If you have any technical difficulties, please consult the user s manual first at: ftp://ftp.arbor.com.tw/pub/manual Please do not hesitate to call or our customer service when you still can not find out the answer. info@arbor.com.tw FCC Class A This device complies with Part of the FCC Rules. Operation is subject to the following two conditions : () this device may not cause harmful interference, and () this device must accept any interference received, including interference that may cause undesired operation. 8 Copyright 0 All Rights Reserved P - -

2 Packing List Before you begin installing your single board, please make sure that the following materials have been shipped: x EmModule-7E x Driver CD x Quick Installation Guide If any of the above items is damaged or missing, contact your vendor immediately. Ordering Information EmModule-7E-N Intel Atom N PC/0 CPU module Optional Accessories CBK--0K-00 Cable kit x SATA cable x SATA Power cable x Serial port cables x KB & MS Y-cable x USB cable x VGA cable x LAN cables - -

3 Specifications System CPU Memory Chipset BIOS Watchdog Timer I/O I/O Chipset Serial Port USB Port KB/MS Expansion Bus Storage Ethernet Chipset Display Soldered onboard Intel Atom N.66GHz processor Soldered onboard GB DDR SDRAM Intel ICH8M AMI PnP Flash BIOS ~ levels reset Fintek F8866 x RS-/8 selectable ports (RS-8 with auto flow control) x USB.0 ports 6-pin wafer connector for keyboard and mouse PC/0 interface x Serial ATA port with 00MB/s HDD transfer rate x CompactFlash Type II socket x Intel 88V PCIe GbE controllers Graphics Chipset Integrated Intel Graphics Media Accelerator 0 Graphics Interface Mechanical & Environmental Power Requirement Power Consumption Operating Temp. Operating Humidity Analog RGB supports resolution up to 08 x 6 LCD: Single channel 8-bit LVDS +V (Additional +V might be required for LCD panel).a@+v (Typical).8A@+V (SATA power required for HDD) -0 ~ 8ºC (-0 ~ 8ºF) 8ºC (non-condensing) Dimension (L x W).8 x 0.7 mm (.77 x. ) - -

4 Find Device Drivers on CD Windows XP Device Driver Path Chipset \Em0-i0K\CHIPSET\Winxp\PVM infinst_autol_...00 \Em0-i0K\GRAPHICS\\Graphics_WinXP V VGA \Em0-i0K\GRAPHICS\6 \Em0-i0K\ETHERNET\ LAN \Em0-i0K\ETHERNET\6 AHCI \Em0-i0K\AHCI Windows 7 Device Driver Path Chipset \Em0-i0K\CHIPSET\Win7\INF. \Em0-i0K\GRAPHICS\ VGA \Em0-i0K\GRAPHICS\6 \Em0-i0K\ETHERNET\ LAN \Em0-i0K\ETHERNET\6 Board Dimensions - - Unit: mm

5 The Installation of Heatsink. Prepare the heatsink included in standard accessory kit. Mount it on the CPU module as below. Insert screws into screw holes at corners.. Secure nuts from another side to fix screws. Overturn the card and tighten the central screw as the final step. - -

6 Jumpers & Connectors Quick Reference Jumpers Label Function JLVCD LCD Panel Voltage Selection JINV LCD Inverter Voltage Selection JRS COM~ RS- or RS-8 Settings Connectors Label INV VGA COM~ COM BAT FPT CN PWR PWR FAN LAN~ USB SATA KBMS LVDS CFD Function Inverter Power Output Analog RGB Display Connector RS- or RS-8 Serial Ports RS-8 Serial Port Battery Connector Reset/Power LED/HDD LED/Speaker PC/0 Connector V/V Power Input V Power Output CPU Fan Power Ethernet Connectors USB 0, Connector Serial ATA Connector PS/ interface Keyboard and Mouse Connector LVDS Panel Connector Compact Flash Connector - 6 -

7 Jumpers & Connectors Location KBMS 0 LVDS JLVCD INV 8 SATA JINV VGA 7 USB JRS PWR LAN 6 LAN FAN 0 COM 7 COM 6 COM COM 8 COM PWR CN FPT BAT CFD - 7 -

8 Jumpers JLVCD: LCD Panel Voltage Selection () Connector type:.00mm pitch, x-pin header The voltage of LCD panel is selected by JLVCD. - +V Connectors INV: LCD Inverter Connector () Connector type:.00mm pitch x-pin box wafer connector Vin GND on/off Brightness control GND - +.V (default) JINV: LCD Inverter Voltage Selection () Connector type:.00mm pitch, x-pin header The voltage of INV is selected by JINV; that is to say, INV s pin is defined by JINV. - +V - +V (default) JRS: COM~ RS- or RS-8 Settings () Connector type:.00mm pitch, x8-pin header - COM RS- (default) - COM RS-8* -6 COM RS- (default) 7-8 COM RS-8* -0 COM RS- (default) - COM RS-8* - COM RS- (default) 6-6 COM RS-8* *Note: Except proper jumper setting, serial Port RS8~Serial Port RS8 items in BIOS (under Configure F8866D Super IO Chipset page) should be set to Enabled mode to use RS-8 function. VGA: Analog RGB Output Connector () Connector type:.00mm pitch x-pin headers GND CRT_RED GND CRT_GREEN 6 GND CRT_BLUE 8 VGA_HSYNC 7 VGA_DDC_DATA 0 VGA_VSYNC VGA_DDC_CLK COM~: RS- or RS-8 Serial Ports (6~) Connector type:.00mm pitch x-pin header Desc. Desc. RX DCD# DTR# TX# 6 DSR# GND 8 CTS# 7 RTS# 0 N/C RI# COM: RS-8 Serial Port (0) Connector type:.00mm pitch x-pin header Desc. Desc. +DATA -DATA +DATA -DATA 6 -DATA GND 8 -DATA 7 +DATA 0 N/C +DATA FPT: Reset/Power LED/HDD LED/Speaker Connector () Connector type:.00mm pitch x8-pin header RESET GND PWR LED+ GND HDD LED+ 6 HDD LED- 7 SPKOUT+ 8 SPKOUT

9 CN: PC/0 Interface () B A PWR: V/V Power Input () Connector type: x-pin terminal VCC V GND GND VCC V VCC V LAN~: Ethernet Connectors (~6) Connector type:.00mm pitch x-pin headers. Desc. C0 D0 PWR: V Power Output () Connector type:.mm pitch x-pin box wafer connector VCC V GND GND VCC V(From of PWR) Desc. TX_MDI0- TX_MDI0+ MDI+ RX_MDI+ 6 RX_MDI- MDI- 8 MDI- 7 MDI+ 0 N/C N/C USB: USB 0, Connector (7) Connector type:.00mm pitch x-pin header Desc. Desc. +V- +V USBP- USBP0-6 USBP+ USBP0+ 8 GND 7 GND 0 N/C GND C D B A 0 0 SATA: Serial ATA Connector (8) High speed transfer rates (00MB/s). GND TX+ TX- GND RX- 6 RX+ 7 GND KBMS: Keyboard & Mouse Connector () Connector type:.0mm pitch x6-pin header KB_DATA GND MS_DATA KB_CLK PS_VCC 6 MS_CLK LVDS: LVDS Panel Connector (0) Connector type: DF--0DP-.V connector VDD VDD N/C TXCLK+ 6 N/C TXCLK- 8 GND 7 GND 0 N/C TXD0+ N/C TXD0- GND GND 6 N/C TXD+ 8 N/C 7 TXD- 0 GND GND N/C TXD+ N/C TXD- 6 GND GND 8 N/C 7 N/C 0 N/C N/C