Features. ! Single vector/bi vector/tri vector measurement! Time of day metering with maximum demand registration

Transcription

1 Sprint 350 Direct connected three-phase energy meter Sprint 350 is an enhanced metering solution for three-phase direct-connected installations. It is suitable for domestic, industrial and commercial applications. It has advanced revenue protection features, making it especially useful in areas where theft and fraud are prevalent. Application! Direct connected domestic, industrial and commercial billing! Sub metering for residential, small industrial and commercial establishments! Remote data collection for billing and consumption analysis Benefits! A wide range catering to various utilities requirement! Power factor recording for reactive power management! Revenue protection! Single vector/bi vector/tri vector measurement! Time of day metering with maximum demand registration and automatic billing! Phase indicators for healthiness of voltages! Backlight LCD display with annunciators for various critical events! Forwarded energy registration under current reversal condition! Scroll lock feature for continuous display of desired parameter! High resolution energy mode for dial test! Interoperable DLMS protocol for meter reading with option for remote reading port! Advanced tamper detection features for voltage, current and magnetic influences! Two separate metrology LEDs for accuracy testing of different energy types! Meter reading in the absence of mains supply using internal battery

2 Sprint 350 Technical specifications Electrical Connection type Direct connected Wiring configuration 3-phase 4-wire Voltage range 230/240 V(P-N), 400/415 V (P-P) Current range 5-30 A, A,10-60 A, A Accuracy Class 1.0 Mains frequency 50 Hz ± 5% Burden As per standards Compliance Standards IS 13779, IEC , IEC , DLMS Indian Companion Standard Mechanical Dimensions (W x H x D) Weight Enclosure Sealing 191 x 255 x 82 mm (approx.) 2 kg (approx.) Engineering plastic Provision of sealing on mains cover and terminal cover Environmental Degree of protection IP 51 Insulation class Protective class II Temperature -10 ºC to +55 ºC (operating) -25 ºC to +70 ºC (storage) Humidity 95% non-condensing Tariff rate registers Maximum Demand Load Survey Communication Contact your nearest sales office for more details Up to 8 rate registers, for two energy channels Up to 2 types, configurable in 8 registers Up to 70 days load profile for 8 parameters (configurable), with 30-minute integration period. Optical port for local communication, optional RS232 (RJ11 port) for remote communication Specifications are subject to change without prior notice. (6-11) Secure Meters Limited P.O. Box No. 30, E-Class Pratap Nagar Industrial Area, Udaipur , INDIA T: F: E:mktg@securetogether.com

3 Sprint 200 family Modular Three Phase Smart Meter The Sprint 200 family are intelligent three phase meters for Smart Metering applications with capability for monitoring, data storage and load control. The provision of Mesh Radio, 3G/GPRS/GSM or Distribution Line Carrier (DLC/LV PLC) communications technologies makes Sprint 200 meters easy to integrate with remote meter management infrastructures for smart metering installations. The range includes models with modular design - enabling communications module to be changed in the field without breaking meter calibration or installation seals. ZigBee communications makes Sprint 200 easy to integrate with Home Area Network (HAN) and In-Home Displays (IHD). Sprint 200 meters have supply disconnection contactor, with optional load control relays for demand side management applications. Application Domestic three-phase metering with remote billing and disconnect True four-quadrant measurement with import/export registration Metering for small commercial premises Time-of-use tariffs and maximum demands Smart metering deployment Integrated three phase mains disconnect contactor and Metering for micro-generation installations Benefits Can be easily integrated into smart meter systems Easy diagnosis of installation faults via a complete set of instantaneous electrical parameters Assists consumers in reducing energy consumption and corresponding carbon dioxide emissions Provides an upgrade path via remote firmware upgrades Modular design allows change of communication module within the life of the meter without breaking meter or installation seals Full Smart Meter functionality including Time of Use based switch control, supply capacity control, remote Remote reading and disconnection functions reduce the need for routine meter visits optional auxiliary load control switch firmware upgrades Logging of multi-parameter load survey, billing data, events such as power outage and abnormalities Easy diagnosis of installation faults via a complete set of instantaneous electrical parameters Quality-of-supply (QoS) metering Automatic remote notification of user-selected events to back-office system Communications options including mesh radio, longrange radio, DLC and 3G/GRPS/GSM

4 Sprint 200 family Technical specifications Electrical Connection type Direct connected Wiring configuration 3-phase 4-wire Voltage range 230 V (L-N), 400 V (L-L), ± 20% Current range A, MID 1-20 (100) A Accuracy Class 1.0, MID Class B Mains frequency 50 Hz ± 5% Burden Voltage Circuit: < 1 W, 1.5 VA per phase Current Circuit: < 0.1 VA per phase Compliance Standards MID Class B, EN , 3, COP10 Mechanical Dimensions (W x H x D) Weight Enclosure 145 x 230 x 112 mm (with standard terminal cover) 145 x 245 x 112 mm (with extended terminal cover) 2.4 kg (approx.) Flame -retardant polycarbonate Environmental Ingress protection Insulation class Impulse withstand Temperature Humidity IP 53 Protective class II J 4 kv AC for 1 minute (RJ-45 port) -40 ºC to +70 ºC (operating) - 40 C to +80 C (storage) 95% non-condensing Quality of supply Load control Up to 4 rate registers for five energy channels Up to 2 types across 4 registers 600 parameter/days with 30 minute integration period LAN: Mesh radio, DLC WAN: 3G/GPRS/GSM long-range radio (via RJ-45 port) HAN: ZigBee (2.4 GHz) Smart Energy Profile IEC 1107 hardware compatible port for local reads Maximum/minimum voltage, over-voltage, under-voltage, minimum power factor, maximum current, supply failure, exception logging Supply disconnect switch: 100A Optional auxiliary load control switch: 31.5 A Specifications are subject to change without prior notice. (Issue 07-10) Tariff rates registers Maximum demand registers Load survey Communication options Secure Meters Limited P.O. Box No. 30, E-Class Pratap Nagar Industrial Area, Udaipur , INDIA T: F: E:mktg@securetogether.com

5 Sprint 200 DLC Three-phase direct-connected meter with DLC Sprint 200 is an intelligent three-phase meter combining advanced monitoring, data storage and communications facilities for advanced metering infrastructure (AMI) applications. The provision of distribution line carrier (DLC) technology makes Sprint 200 easy to integrate with remote reading infrastructure. The meter provides data to a meter data concentrator (MDC) using CENELEC C Band protocol over the low-voltage mains cables. The MDC transfers data to the network management system (NMS) in the central station using general packet radio service (GPRS) connectivity. Application Small commercial and industrial premises Tri-vector energy measurement Metering for AMI) deployment Time-of-use tariffs and maximum demands, with Tenant billing for residential complexes automatic scheduled self-billing Automatic 'forwarding' of energy registration in case of current reversal Large backlit display with high-resolution mode for accuracy testing Option for pulse output Communications ports for local and remote reading # Optical (ANSI) port for local reading # RS-232 (RJ-45) port for remote reading Integrated DLC communication using CENELEC protocol in C-Band Event detection Special economic zones (SEZ) Benefits No manual intervention required for data collection Uses existing mains cabling for communication Fully integrated DLC functionality makes installation easy

6 Sprint Dual DLC Technical specifications Electrical Connection type Wiring configuration Voltage range Current range Accuracy Mains frequency Burden Direct connected 3-phase 4-wire 230 V (L-N), 400 V (L-L) ± 30% 5-65 A Class A (2.0) 50 Hz ± 5% Voltage Circuit: < 1 W & 2 VA (per phase) Current Circuit: < 0.5 VA (per phase) Compliance Standards EN , EN :2006, CE mark Mechanical Dimensions (W x H x D) Weight Enclosure Sealing 180 x 272 x 93 mm (with extended terminal cover) 1.7 kg (approx.) Flame-retardant polycarbonate Facilities are provided for sealing Environmental Degree of protection Insulation class Temperature Humidity IP 53 Protective class II -40 ºC to +70 ºC (operating) 40 ºC to +80 ºC (storage) 95% non-condensing Communication Quality-of-supply monitoring Up to 8 rate registers, for two energy channels Up to 4 registers, for two energy channels 440 parameter-days (up to 4 channels with 110 days each) with 30-minute integration period DLC: CENELEC C-Band RS-232 for remote reading (via RJ-45 port) ANSI port for local reading Maximum/minimum voltage, over-voltage, under-voltage, voltage sag, voltage swell, over-current and supply failure Specifications are subject to change without prior notice. (Issue 11-11) Tariff rate registers Maximum Demand Load Survey Secure Meters Limited P.O. Box No. 30, E-Class Pratap Nagar Industrial Area, Udaipur , INDIA T: F: E:mktg@securetogether.com

7 Sprint Direct-connected Three-phase Energy Meter Sprint is a full four-quadrant, three-phase whole-current metering platform for use in markets where flexible time-of-use tariff facilities are required. Sprint offers a cost-effective solution for everything from basic direct-connected applications to full time-of-use and maximum demand metering. Application Direct-connected domestic, industrial and commercial billing Single-phase, two-phase or three-phase low-voltage circuits Benefits Compact and accurate Reliable and flexible in use Easy to install; wiring faults can be diagnosed from instantaneous parameters True four-quadrant measurement Time-of-use tariffs and maximum demands Multi-drop network capability via PACTLAN addressing Logging of events such as power outage and communications activity Build option of 1 pulse output and 1 input

8 Sprint Technical specifications Electrical Connection type Wiring configuration Voltage range Current range Accuracy Mains frequency Burden Direct connected 3-phase 4-wire V (L-N) A, A Class 1.0, Class Hz ± 5% Voltage circuit: < 1 W, 1.5 VA (per phase) Current circuit: < 0.1 VA (per phase) Compliance Standards IEC , IEC Mechanical Dimensions (W x H x D) Weight Enclosure Sealing 175 x 191 x 54 mm 1.2 kg (approx.) Engineering plastic Sealable screws on main cover and terminal cover Environmental Degree of protection Insulation class Impulse withstand Temperature Humidity IP 51 Protective class II 6 kv -10 ºC to +45 ºC (operating) -25 ºC to +70 ºC (storage) 95% non-condensing Pulse output Pulse output (build option) Up to 8 rates Up to 2 types, configurable in 4 registers 150 parameter-days with 30-minute integration period IEC 1107 hardware-compatible port for local communication, PACT port for remote communication Voltage rating 230 V AC. Cable entry 2.5 mm2 Voltage rating 230V AC, V DC max. Cable entry 2.5 mm2 Specifications are subject to change without prior notice. (8-10) Tariff Maximum demand Load survey Communication Secure Meters Limited P.O. Box No. 30, E-Class Pratap Nagar Industrial Area, Udaipur , INDIA T: F: E:mktg@securetogether.com

9 Sprint 210 Three phase meter - modular communications The Sprint 210 three phase meter provides communications flexibility using a modular design and DLMS/COSEM to readily accommodate the latest communication technologies. The communication module can be factory installed or field installed/replaceable. This allows for greater flexibility by utilising best of breed technologies and future proofing your investment. Sprint 210 paves the way for easy and convenient data transfer from the meter to the utility s back office and is the perfect solution for AMI applications. Provision for a range of communication technologies including Mesh Radio, GPRS/3G devices, among others, ensures the Sprint 210 will meet your current and future needs. SE-IHD Image depicted with 35mm terminal cover Applications Domestic three phase metering Small to medium commercial premises AMI (Advanced Metering Infrastructure) and non AMI Suitable for co-generation metering applications Benefits Modular comms with easy integration with AMI system Reduced onsite call times and cost Assists consumers to manage energy consumption Front mounted communications module for easy access Multiple configurations (up to 16) can be pre-loaded in the meter and executed in the field Options and Accessories Multiple factory build options including: Integrated Mains Supply Contactor Auxiliary load control terminals - various Customer Supply Monitoring Various Terminal Cover sizes Comms Devices: Factory built-in (AMI) or without (AMI Ready) Software: M-Cubed software suite including FlexTend - meter configuration tool In-Home Display - Zigbee compliant (See IHD Range) GPRS or 3G Modem Optical Communications Probe Four quadrant metering Class 1.0 accuracy Integrated Mains supply contactor (AMI Ready) and auxiliary load terminals (Build Options) Remote and local arm, connect and disconnect capability Support for AMI features: TOU based switching, Boost, Supply capacity control, Remote firmware upgrades Large capacity power supply to support high communications demands Modular Communications front belly design with support for a range of communication devices ANSI or IEC Optical Port Bidirectional: Import (consumed) and Export (generated) 16 main energy channels and 8 time-based registers Logging and remote notification (alarm) of events QoS (Quality of Supply) monitoring User friendly tariff configurability features User friendly Liquid Crystal Display Provision for tamper detection Interval data(load Profile) storage for up to 4680 days including power load profile. Configurable survey integration and maximum demand periods Standards/Regulatory: Open protocols supported, including DLMS COSEM Smart Metering Infrastructure (NSMP) compliant, Australia (Build option)

10 Sprint 210 Technical specifications Electrical Connection type Load Terminals Metrology Lamp Compliance Accuracy Power Supply Rated Voltage 230 V, -20% to +15% Rated Frequency 50 Hz ± 5% Current Range Data Storage Capacity Energy / Demand Load Profile Configurable Energy Channels up to 8 QoS Parameters Protection Voltage, continuous 3 Phase, 4 Wires, Active-Neutral, Direct Connected Variant specific, (internal 31.5 A Load Control, 2A Load Control) Two Configurable Metrological LED s for Active and Reactive energy AS , AS , AS , AS , NMI-M6 IEC , IEC , IEC , IEC Class 1.0 (Active Energy), Class 2.0 (Reactive Energy) 10 A I b, 100 A I max 1680 days (single 30 minute interval (Configurable Interval) 3000 days (single 30 minute interval (Configurable Interval) Parameters include: Ave Voltage, Current, THD, Temperature, etc. 300V (Phase-Neutral) Impulse Withstanding 10 kv, 0.5 Joule (12 kv, 9 Joule as per NMI M6) Switches Mains Supply Contactor Auxiliary Load control Mechanical Dimensions (WxHxD) Enclosure Material Sealing Weight Display Mounting Type Pulse Output (Optional) Output Options Communication 100A (Build option) 31.5A and/or 2A (Build options) 180 x 221 x 118 mm 180 x 252 x 118 mm (with 35 mm TBC), 180 x 282 x 118 mm (with 65 mm ETBC) Fire Retardant Poly-Carbonate Terminal Cover, Meter main cover, Config button, Communications Module 2.4 kg Approx. Liquid Crystal Display Projection 230 V ac, 2A - Voltage free (Option for up to 3 relays) 27 V dc, 27mA (Option for up to 2 outputs) Local Communication IEC Optical Port (IEC ) or ANSI Optical Port (AS ) Remote Communication Outage Notification Environmental LAN, HAN, WAN. Support for most communication topologies Hot swapable Interchangeable modules Sealable Separately Reserve Power Supply (Build option) Temperature Operating: -10 C to +60 C Storage: -25 C to +70 C Limit Temperature Range -20 C to +70 C Operating Humidity For detailed specification, please refer to Technical Specification Guide Up to 95% (Non Condensing) Specifications are subject to change without prior notice Issue H (DCR A10045) Secure Australasia Pty Ltd 258 Darebin Rd Fairfield Victoria 3078 p: f: e: info@securetogether.com.au