21-AUG E35. RYR410x. LTE Cat M1 / NB-IoT & GNSS Full / Half-size mini PCIe Card. Datasheet

Transcription

1 21-AUG E35 LTE Cat M1 / NB-IoT & GNSS Full / Half-size mini PCIe Card Datasheet 1

2 PRODUCT DESCRIPTION The series is based on the PCI Express Mini Card standard with a USB 2.0 interface FEATURES u-blox SARA-R410-02B LTE Cat M1 / NB1 engine. Bands = 2, 3, 4, 5, 8, 12, 13, 20, 28. Build-in a micro SIM card holder. u-blox 72-channel EVA-M8M-0 engine.(optional) Standard mini PCIe full-size 30mm*50.95mm / half-size 30mm*26.8mm. Low idle mode current. Temperature range: -40 to +85 C. Manufactured in ISO/TS certified production sites. Mini PCIe Signal Type USB2.0. BLOCK DIAGRAM U.FL-R-SMT-1 U.FL-R-SMT-1 u-blox Cat M1 / NB1 engine Micro SIM Card Socket GNSS Module (OPTIONAL) USB HUB (OPTIONAL) Switching Power VDD UART USB UART SIM Card PCIe Socket 2

3 DIMENSIONS micro SIM card holder Cat M1 / NB1 engine unit: mm PCB Thickness 1mm 3

4 PIN CONNECTOR GNSS U.FL-R-SMT-1 Socket (Optioanal) GNSS engine EVA-M8M (Optional) Full / Half size Cutting Line Cat M1 / NB1 U.FL-R-SMT-1 Socket Pin1 Pin51 Pin52 Micro SIM Card Socket Pin2 4

5 PIN DESCRIPTION Pin Name Input/Output Description 1 GPIO2 Output Module status indication SARA-R4 pin23 2 VCC_3V3 Power Power Input 3 Not connected 4 Power Ground 5 Not connected 6 GNSS_TXD Output +1.8V UART GNSS data output EVA-M8M-0 pin16 7 PWR_ON Input Power-on / power-off input SARA-R4 pin15 8 SIM_VCC External SIM signal Power supply for the SIM 9 Power Ground 10 SIM_IO Input/Output External SIM signal Data I/O 11 V_INT Output +1.8V Power Output SARA-R4 pin4 12 SIM_CLK Output External SIM signal Clock 13 UART_DSR Output UART data set ready SARA-R4 pin6 14 SIM_RST Input External SIM signal Reset 15 Power Ground 16 Not connected 17 GNSS_RXD Input +1.8V UART GNSS data input EVA-M8M-0 pin15 18 Power Ground 19 Not connected 20 W_DISABLE_N Input Hi or Open : Enable the power Low : Disable the power 21 Power Ground 22 RESET_N Input SARA-R4 External reset input SARA-R4 pin18 23 UART_RXD Input +1.8V UART data input SARA-R4 pin12 24 VCC_3V3 Power Power Input 25 UART_RTS Output +1.8V UART clear to send SARA-R4 pin11 26 Power Ground 27 Power Ground 28 UART_CTS Input +1.8V UART ready to send SARA-R4 pin10 29 Power Ground 30 UART_DCD Output +1.8V UART data carrier detect SARA-R4 pin8 31 UART_TXD Output +1.8V UART data output SARA-R4 pin13 32 Not connected 33 GPIO1 RESERVED pin SARA-R4 pin16 5

6 34 Power Ground 35 Power Ground 36 USB_DN Input/Output USB Data Negative 37 Power Ground 38 USB_DP Input/Output USB Data Positive 39 VCC_3V3 Power Power Input 40 Power Ground 41 VCC_3V3 Power Power Input 42 LED_WWAN Output Default: high impedance; LED setting flash via AT command port AT+UGPIOC=16,2 43 Power Ground 44 GPIO5 Input SIM detection SARA-R4 pin42 45 Not connected 46 UART_DTR Input +1.8V UART data terminal ready SARA-R4 pin9 47 Not connected 48 V_BCKP Input Real Time Clock Backup supply EVA-M8M-0 pin21 49 Not connected 50 Power Ground 51 Not connected 52 VCC_3V3 Power Power Input 6

7 SPECIFICATION Item Min. Typ Max. Unit Description u-blox Cat M1 / NB1 SARA-R410M-02B FDD bands 9 Ch. 2, 3, 4, 5, 8, 12, 13, 20, 28 Downlink Speed 375 kb/s Cat M1 Half-duplex Uplink Speed 375 kb/s Cat M1 Half-duplex Downlink Speed 27.2 kb/s Cat NB1 Half-duplex Uplink Speed 62.5 kb/s Cat NB1 Half-duplex Operating Voltage Power Input VCC_3V V USB Interface V2.0 Operating Temperature Range C Antenna Connector 1 U.FL-R-SMT-1 Weight 6 g u-blox GNSS EVA-M8M-0 (OPTIONAL) GNSS Center Frequency MHz GPS Glonass Navigation Update Rate 1 18 Hz Configurable Accuracy 2.5 M CEP Cold Starts 27 Sec. Aided Starts 4 Sec. Reacquisition 1 Sec. Tracking Sensitivity -164 dbm Cold Starts Sensitivity -147 dbm Hot Starts Sensitivity -156 dbm 7

8 APPLICATION SCHEMATIC REFEREE Option PWR_ON R1 R Q1 MOSFET N +3.3V LED1 GREEN R4 1K Q3 PDTC124ET GPIO2 V_INT UART_DSR GNSS_RXD UART_RXD UART_RTS UART_TXD Option SIM_VCC SIM_RST SIM_CLK SIM_IO J1A RYR GPIO PWR_ON V_INT 15 UART_DSR 2 VCC_3V3 4 GNSS_TXD 6 SIM_VCC 8 SIM_IO SIM_CLK 14 SIM_RST GNSS_RXD W_DISABLE_N RESET_N UART_RXD VCC_3V3 27 UART_RTS UART_CTS 31 UART_DCD UART_TXD GPIO USB_D USB_D+ 41 VCC_3V VCC_3V3 LED_WWAN GPIO5 47 UART_DTR V_BCKP VCC_3V3 CON1 RYSC10I C2 0.1uF 4 8 SIM_VCC SIM_IO SIM_CLK SIM_RST LED USB_D- USB_D+ R2 330 W_DISABLE_N D1 LED +3.3V C1 330uF/6.3V Option GNSS_TXD UART_CTS UART_DCD GPIO5 UART_DTR +3.3V Q2 MOSFET N R5 330 DN1 BAT54C BT1 MS621FE FL11E R R3 RESET_N 8

9 DRIVER AND CONFIGURATION TOOLS Complete software along with host driver for various operating systems such as Windows, Please download the driver and u-blox u-center from ORDER INFORMATION Ordering No. Cat M1 / NB1 Engine GNSS Engine RYR410M SARA-R410M-02B RYR4108 SARA-R410M-02B EVA-M8M-0 *If you need UART version, please contact us. Taiwan: sales@reyax.com China: sales@reyax.com.cn 9