Narrow pitch connectors (0.4mm pitch)

Size: px
Start display at page:

Download "Narrow pitch connectors (0.4mm pitch)"

Transcription

1 For board-to-board For board-to-fp Narrow pitch connectors (0.4mm pitch) P4 Series Without soldering terminals 5.1mm 3.96mm With soldering terminals FATURS mm pitch and support for mated heights of up to 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 3.5 mm, and 4.0 mm. 2. Strong resistance to adverse environments! Utilizes construction for high contact reliability. 3. onstructed with impact dispersion keys inside the body to disperse shocks when dropped. Impact dispersion key 2) Guides are provided to take up any position shift and facilitate insertion. Insertion guide 3) Guides are provided to take up any position shift and facilitate insertion. 5.1mm 3.96mm side contact Products to be discontinued. Simple lock mechanism side contact A high level of shock resistance is ensured by dispersing impact over the four locations where the socket indentations and header protrusions are mated together. Note: The following numbers of pins are not supported due to suction surface factors. Without soldering terminals: 18 pin contacts or less With soldering terminals: 22 pin contacts or less 4. onstruction makes designing devices easier. 1) The lower connector bottom surface construction prevents contact and shorts between the PB and metal terminals. This enables freedom in pattern wiring, helping to make PB s smaller. 5. Design facilitates efficient mounting. Features a terminal flatness of 0.08 mm, construction resistant to creeping flux, and design that allows visual inspection of the soldered part. 6. onnectors for inspection available APPLIATIONS Mobile devices, such as cellular phones, digital still cameras and digital video cameras. <> <> onnector bottom: reate any thru-hole and pattern wiring. 1

2 ORDRING INFORMATION 7: Narrow Pitch onnector P4 (0.4 mm pitch) 8: Narrow Pitch onnector P4 (0.4 mm pitch) AXK G Number of pins (2 digits) Mated height <> 1: For mated height 1.5 mm 2: For mated height 2.0 mm 3: For mated height 2.5 mm and 3.0 mm 4: For mated height 3.5 mm 5: For mated height 4.0 mm <> 1: For mated height 1.5 mm, 2.0 mm and 2.5 mm 2: For mated height 3.0 mm, 3.5 mm and 4.0 mm Functions 2: With soldering terminals, without positioning bosses 4: Without soldering terminals, without positioning bosses Surface treatment (ontact portion / Terminal portion) <> 7: Ni plating on base, Au plating on surface (for Ni barrier available) <> 5: Ni plating on base, Au plating on surface Other specifications <> W: V notch and post edge horseshoe bend type product Packing G: 3,000 pieces embossed tape and plastic reel x 2 Notes: 1. Only a socket of mated height 3.5 mm and 4.0 mm: 2,000 pieces embossed tape and plastic reel x Please note that the models with a soldering terminals (8th digit of part number is 2 ) and those without a soldering terminals (8th digit of part number is 4 ) are shaped differently and are not compatible. 2

3 PRODUT TYPS 1. Without soldering terminals Mated height Number of pins Part number Inner carton Packing Outer carton 14 AXK714147G AXK814145WG 16 AXK716147G AXK816145WG 20 AXK720147G AXK820145WG 22 AXK722147G AXK822145WG 24 AXK724147G AXK824145WG 26 AXK726147G AXK826145WG 28 AXK728147G AXK828145WG 30 AXK730147G AXK830145WG 34 AXK734147G AXK834145WG 36 AXK736147G AXK836145WG 1.5 mm 40 AXK740147G AXK840145WG 42 AXK742147G AXK842145WG 44 AXK744147G AXK844145WG AXK7147G AXK8145WG 54 AXK754147G AXK854145WG 60 AXK760147G AXK860145WG 64 AXK764147G AXK864145WG 70 AXK770147G AXK870145WG AXK7147G AXK8145WG 90 AXK790147G AXK890145WG 100 AXK700147G AXK0145WG 14 AXK714247G AXK814145WG 20 AXK720247G AXK820145WG 24 AXK724247G AXK824145WG 26 AXK726247G AXK826145WG 30 AXK730247G AXK830145WG 34 AXK734247G AXK834145WG 2.0 mm 38 AXK738247G AXK838145WG 40 AXK740247G AXK840145WG AXK7247G AXK8145WG 54 AXK754247G AXK854145WG 60 AXK760247G AXK860145WG 70 AXK770247G AXK870145WG AXK7247G AXK8145WG 100 AXK700247G AXK0145WG 14 AXK714347G AXK814145WG 20 AXK720347G AXK820145WG 24 AXK724347G AXK824145WG 30 AXK730347G AXK830145WG 34 AXK734347G AXK834145WG 40 AXK740347G AXK840145WG 2.5 mm 44 AXK744347G AXK844145WG AXK7347G AXK8145WG 60 AXK760347G AXK860145WG 70 AXK770347G AXK870145WG AXK7347G AXK8145WG 90 AXK790347G AXK890145WG 100 AXK700347G AXK0145WG 20 AXK720347G AXK820245WG 24 AXK724347G AXK824245WG 30 AXK730347G AXK830245WG 3.0 mm 40 AXK740347G AXK840245WG AXK7347G AXK8245WG 60 AXK760347G AXK860245WG AXK7347G AXK8245WG 100 AXK700347G AXK0245WG 20 AXK720447G AXK820245WG 3.5 mm 30 AXK730447G AXK830245WG 40 AXK740447G AXK840245WG 4.0 mm 24 AXK724547G AXK824245WG 3,000 pieces 6,000 pieces : 2,000 pieces : 3,000 pieces : 4,000 pieces : 6,000 pieces Notes: 1. Regarding ordering units; During production: Please make orders in 1-reel units. Samples for mounting confirmation: Available in units of pieces. Please consult us. (See Regarding sample orders to confirm proper mounting on page 4 of the onnector Technical Information. ) Samples: Small lot orders are possible. 2. The above part numbers are for connectors without positioning bosses, which are standard. When ordering connectors with positioning bosses, please contact our sales office. 3. Different number of pins are available on-demand production only. Please contact us for more details. 3

4 Products marked are discontinued as of September 30, With soldering terminals Part number Mated height 1.5 mm 2.0 mm 2.5 mm 3.0 mm 3.5 mm 4.0 mm Number of pins Packing AXK710127G AXK712127G AXK720127G AXK722127G AXK724127G AXK728127G AXK730127G AXK734127G AXK736127G AXK740127G AXK744127G AXK746127G AXK7127G AXK760127G AXK7127G AXK790127G AXK700127G AXK720227G AXK724227G AXK730227G AXK734227G AXK740227G AXK7227G AXK810125WG AXK812125WG AXK820125WG AXK822125WG AXK824125WG AXK828125WG AXK830125WG AXK834125WG AXK836125WG AXK840125WG AXK844125WG AXK846125WG AXK8125WG AXK860125WG AXK8125WG AXK890125WG AXK0125WG AXK820125WG AXK824125WG AXK830125WG AXK834125WG AXK840125WG AXK8125WG AXK760227G AXK7227G AXK712327G AXK720327G AXK728327G AXK732327G AXK736327G AXK740327G AXK7327G AXK760327G AXK7327G AXK790327G AXK720327G AXK736327G AXK740327G AXK7327G AXK760327G AXK770327G AXK7327G AXK790327G AXK720427G AXK860125WG AXK8125WG AXK812125WG AXK820125WG AXK828125WG AXK832125WG AXK836125WG AXK840125WG AXK8125WG AXK860125WG AXK8125WG AXK890125WG AXK820225WG AXK836225WG AXK840225WG AXK8225WG AXK860225WG AXK870225WG AXK8225WG AXK890225WG AXK820225WG AXK730427G AXK740427G AXK7427G AXK760427G AXK770427G AXK7427G AXK734527G AXK830225WG AXK840225WG AXK8225WG AXK860225WG AXK870225WG AXK8225WG AXK834225WG 42 AXK742527G AXK7527G AXK7527G AXK842225WG AXK8225WG AXK8225WG Inner carton Outer carton 3,000 pieces 6,000 pieces : 2,000 pieces : 3,000 pieces : 4,000 pieces : 6,000 pieces : 2,000 pieces : 3,000 pieces : 4,000 pieces : 6,000 pieces Notes: 1. Regarding ordering units; During production: Please make orders in 1-reel units. Samples for mounting confirmation: Available in units of pieces. Please consult us. (See Regarding sample orders to confirm proper mounting on page 4 of the onnector Technical Information.) Samples: Small lot orders are possible. 2. The above part numbers are for connectors without positioning bosses, which are standard. When ordering connectors with positioning bosses, please contact our sales office. 3. Different number of pins are available on-demand production only. Please contact us for more details. 4

5 SPIFIATIONS 1. haracteristics lectrical characteristics Mechanical characteristics nvironmental characteristics Lifetime characteristics Unit weight Item Specifications onditions Rated current 0.3A/pin contact (Max. 5 A at total pin contacts) Rated voltage 60V A/D Breakdown voltage 1V A for 1 min. Detection current: 1mA Insulation resistance Min. 1,000M (initial) Using 2V D megger (applied for 1 min.) ontact resistance omposite insertion force omposite removal force 2. Material and surface treatment Part name Material Surface treatment Molded portion LP resin (UL94V-0) Based on the contact resistance measurement method Max. 70m specified by JIS Max N {100gf}/pin contacts pin contacts (initial) Min N {6gf}/pin contacts pin contacts (Mated height 1.5 mm without soldering terminals type) Min N {12gf}/pin contacts pin contacts All the other types except the above (Mated height 1.5 mm without soldering terminals type) Post holding force Min N {100gf}/pin contacts Measuring the maximum force. As the contact is axially pull out. Ambient temperature 55 to +85 No freezing at low temperatures Soldering heat resistance Storage temperature Thermal shock resistance (header and socket mated) Humidity resistance (header and socket mated) Saltwater spray resistance (header and socket mated) H2S resistance (header and socket mated) Insertion and removal life Max. peak temperature of 260 (on the surface of the P board around the connector terminals) 300 within 5 sec. 3 within 3 sec. 55 to +85 (product only) 40 to + (emboss packing) 5 cycles, insulation resistance min. 100M, contact resistance max. 70m 120 hours, insulation resistance min. 100M, contact resistance max. 70m 24 hours, insulation resistance min. 100M, contact resistance max. 70m 48 hours, contact resistance max. 70m times Mated height 1.5mm, 20 pin contacts; : 0.04g : 0.02g Infrared reflow soldering Soldering iron No freezing at low temperatures. No dew condensation. onformed to MIL-STD-202F, method 107G Order Temperature ( ) Time (minutes) Max Max Bath temperature 40 2, humidity 90 to 95% R.H. Bath temperature 35 2, saltwater concentration 5 1% Bath temperature 40 2, gas concentration 3 1 ppm, humidity 75 to % R.H. Repeated insertion and removal speed of max. 200 times/hours ontact and Post opper alloy ontact portion: Ni plating on base, Au plating on surface Terminal portion: Ni plating on base, Au plating on surface (xcept for thick of terminal) However, upper terminal of Ni barrier production: xposed over Ni The area adjacent to the terminal of the sockets on models with Ni barrier is exposed to Ni on base. Soldering terminals portion opper alloy Ni plating on base, Sn plating on surface (xcept for front terminal) 5

6 DIMNSIONS Interested in AD data? You can obtain AD data for all products with a mark from your local Panasonic lectric Works representative. AD Data 1. Without Soldering Terminals (Mated height: 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 3.5 mm and 4.0 mm) 0.15±0.03 A B± Max. 18 pin contacts 1.11 (Suction face) (0.675) 5.10 (0.675) 0.08 (Unit: mm) Number of pins/ dimension A B D Dimension table (mm) D General tolerance: 0.2 Mated height/dimension 1.5mm mm mm, 3.0mm mm mm 3.42 (Mated height: 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 3.5 mm and 4.0 mm) ±0.03 A B± Max. 18 pin contacts F (Suction face) ±0.03 (0.42) 3.12 (0.42) Number of pins/ dimension A B D Dimension table (mm) D General tolerance: 0.2 Mated height/dimension F 1.5mm, 2.0mm, 2.5mm mm, 3.5mm, 4.0mm and are mated 1.± ± ± ± ± ±0.15 6

7 2. With Soldering Terminals (Mated height: 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm and 4.0mm) ± A B±0.1 D 10 and 12 pin contacts 1.11 (Suction face) 0. F Soldering terminals 0.10± and 22 pin contacts 0.60 (0.675) (0.675) 0.08 Dimension table (mm) Number of pins/ dimension A B D Mated height/dimension F 1.5mm mm mm, 3.0mm 2.42 General tolerance: mm mm 3.42 (Mated height: 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm and 4.0mm) Dimension table (mm) Number of pins/ dimension A B D A B± ±0.03 G (Suction face) F ± (0.42) (0.42) Soldering terminals D and 12 pin contacts 20 and 22 pin conta Mated height/dimension F G 1.5mm, 2.0mm, 2.5mm General tolerance: mm, 3.5mm, 4.0mm and are mated. 1.± ± ± ± ± ±0.15 7

8 MBOSSD TAP DIMNSIONS (unit: mm, ommon for respective contact type, socket and header) Tape dimensions (onforming to JIS However, some tapes have mounting hole pitches that do not comply with the standard.) Tape I Tape II A± A±0.3 B 1.75 Plastic reel dimensions (onforming to IAJ T-7200B) D±1 Taping reel Top cover tape Pull out direction Pull out direction dia. mbossed carrier tape mbossed mounting-hole dia dia. Dimension table (mm) 1. Without Soldering Terminals Mated height 2. With Soldering Terminals Number of pins 3. onnector orientation with respect to direction of progress of embossed tape 1) Without soldering terminals Type of taping A B D Quantity per reel Max. 18 Max. 18 Tape I ,000 ommon for socket and header: 20 to to 70 Tape I , mm, 2.0 mm, 2.5 mm and 3.0 mm : 3.5mm and 4.0 mm to 100 to 100 Tape II ,000 to 100 Tape II ,000 : 3.5mm and 4.0 mm 20 to 40 Tape I ,000 Mated height ommon for socket and header: 1.5 mm, 2.0 mm, 2.5 mm and 3.0 mm : 3.5mm and 4.0 mm : 3.5mm and 4.0 mm Direction of tape progress Type Number of pins Type of taping A B D Quantity per reel Max. 18 Max. 18 Tape I , to to 70 Tape I , to 90 to 100 Tape II , Tape II , to 60 Tape I , to 90 Tape II ,000 ommon for P4 Note: There is no indication on this product regarding top-bottom or left-right orientation. 2) With soldering terminals Direction of tape progress Type ommon for P4 Note: There is no indication on this product regarding top-bottom or left-right orientation. 8

9 For board-to-board For board-to-fp onnectors for inspection usage (0.4mm pitch) P4 Series 5.1mm 3.96mm Products to be discontinued. FATURS 1. 3,000 mating and unmating cycles 2. Same external dimensions and foot patterns as standard type. 3. Improved mating Insertion and removal easy due to a reduction in mating retention force. This is made possible by a simple locking structure design. Note: Mating retention force cannot be warranted. APPLIATIONS Ideal for module unit inspection and equipment assembly inspection TABL OF PRODUT TYPS : Available for sale Product name Number of pins P4 for inspection without soldering terminals P4 for inspection with soldering terminals Notes: 1. You can use with each mated height in common. 2. Please inquire about numbers of pins other than those shown above. 3. Please inquire with us regarding availability. 4. Please keep the minimum order quantities no less than pieces per lot. 5. Please inquire if further information is needed. PRODUT TYPS With soldering terminals Without soldering terminals Specifications Part No. Specifications Part No. Without positioning bosses Without positioning bosses AXK7 26G AXK7 46G Notes: 1. When placing an order, substitute the (asterisk) in the above part number with the number of pins for the specific connector. 2. The above part numbers are for connectors without positioning bosses, which are standard. When ordering connectors with positioning bosses, please contact our sales office. With soldering terminals Without soldering terminals Without positioning bosses Without positioning bosses AXK8 26WG AXK8 46WG 9

10 NOTS 1. As shown below, excess force during insertion may result in damage to the connector or removal of the solder. Also, to prevent connector damage please confirm the correct position before mating connectors. 1) Without soldering terminals Recommended P board pattern (TOP VIW) 0.23±0.03 Recommended P board pattern (TOP VIW) 0.23± ± ± Keep the P board warp no more than 0.03 mm in relation to the overall length of the connector. Max mm Max mm 3. P Boards and Recommended Metal Mask Patterns onnectors are mounted with high density, intervals of 0.35 mm, 0.4 mm or 0.5 mm. In order to reduce solder bridges and other issues make sure the proper level of solder is used. The figures to the right are recommended metal mask patterns. Please use them as a reference ±0.05 Metal mask thickness: Here, 1 m (Opening area ratio: 40%) 5.± ±0.01 (0.51) 2.96± ±0.05 (0.51) Metal mask thickness: Here, 120 m (Opening area ratio: %) 5.± ±0.01 (0.63) (0.63) 0.115±0.05 Metal mask thickness: Here, 1 m (Opening area ratio: 32%) 4.10± ±0.01 (0.30) (0.30) 4.10± ±0.01 Metal mask thickness: Here, 120 m (Opening area ratio: 40%) (0.37) (0.37) 10

11 2) With soldering terminals Recommended P board pattern (TOP VIW) Recommended P board pattern (TOP VIW) 0.23± ± ± ±0.05 (1.10) 5.70± ±0.05 (1.10) 0.90± ± ±0.05 (0.) 0.90± ± ±0.05 (0.) 0.± ±0.05 Metal mask thickness: Here, 1 m (Terminal portion opening area ratio: 40%) (Metal portion opening area ratio: 65%) Metal mask thickness: Here, 1 m (Terminal portion opening area ratio: 32%) (Metal portion opening area ratio: 65%) 5.± ± ±0.01 (0.51) (0.51) 0.58± ± ± ± ±0.01 (0.30) (0.30) 0.58± ± ± ±0.01 Metal mask thickness: Here, 120 m (Terminal portion opening area ratio: %) (Metal portion opening area ratio: %) (0.63) Metal mask thickness: Here, 120 m (Terminal portion opening area ratio: 40%) (Metal portion opening area ratio: %) (0.37) 5.± ± ±0.01 (0.63) 2.15± ± ± ± ± ±0.01 (0.37) 0.72± ± ±0.01 For autions for Use, see onnector Technical Information. For other details, please verify with the product specification sheets. 11

NARROW PITCH (0.4mm) CONNECTORS P4 SERIES

NARROW PITCH (0.4mm) CONNECTORS P4 SERIES Without soldering terminal With soldering terminal NARROW-PITH ONNTORS FOR BOARD-TO-BOARD AND BOARD-TO-FP ONNTION FATURS 1. 0.4 mm pitch and support for mated heights of up to 1.5 mm, 2.0 mm, 2.5 mm, 3.0

More information

For board-to-board. Narrow pitch connectors (0.5mm pitch)

For board-to-board. Narrow pitch connectors (0.5mm pitch) Discontinued Discontinued as as of of September September 30, 30, 013 013 For board-to-board Narrow pitch connectors (0.5mm pitch) P5KL Series 5.8mm 3.3mm Products are discontinued. FEATURES 1. Low profile

More information

The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment.

The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment. Compliance with RoHS Directive The 2.5 mm wide ultra-slim body contributes to further miniaturization and functionality enhancement of target equipment. FEATURES 1. 2.5 mm wide ultra-slim two-piece connectors

More information

NARROW PITCH (0.4 mm) CONNECTORS F4S SERIES

NARROW PITCH (0.4 mm) CONNECTORS F4S SERIES NARROW-PITCH, THIN AN SLIM CONNECTOR FOR BOAR-TO-FPC CONNECTION FEATURES 1. Space-saving (3.6 mm widthwise) The required space is smaller than our F4 series (40-contact type): 27% smaller, 38% smaller

More information

Narrow pitch connectors (0.4mm pitch)

Narrow pitch connectors (0.4mm pitch) For board-to-board For board-to-fpc AXK7, 8 Narrow pitch connectors (0.4mm pitch) P4 Series Without soldering terminals 5.1mm 5.1mm 3.96mm With soldering terminals 3.96mm Compliance with RoHS Directive

More information

Impact dispersion key. Header

Impact dispersion key. Header Automation Controls Catalog Partly To Be Discontinued For board-to-board For board-to-fpc Narrow pitch connectors (0.4mm pitch) P4 Series Without soldering terminals 5.1mm 3.96mm With soldering terminals

More information

FPC connectors (0.2mm pitch) Back lock

FPC connectors (0.2mm pitch) Back lock 0.9 AYF21 For FPC FPC connectors (0.2mm pitch) Back lock Y2B Series New FEATURES 1. Slim and low profile design (Pitch: 0.2 mm) 0.2 mm pitch back lock design and the slim body with a 3.15 mm depth (with

More information

onlinecomponents.com

onlinecomponents.com 0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B Series New FEATURES 1. Slim and low profile design (Pitch: 0.3 mm) The use of a back lock mechanism enables a 3.15 mm (with lever) low profile design.

More information

NARROW-PITCH (0.8mm) CONNECTORS P8 SERIES

NARROW-PITCH (0.8mm) CONNECTORS P8 SERIES Socket Header Compliance with RoHS Directive FETURES 1. The product lineup consists of the low profile of 3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 7.0 mm, 8.0 mm, 11.5 mm, and 13.0 mm 14.0

More information

2.2 mm Ultra-slim body with the inherited high reliability

2.2 mm Ultra-slim body with the inherited high reliability For board-to-fpc Narrow pitch connectors DVNCED Series 0.4mm pitch 2.2 mm Ultra-slim body with the inherited high reliability 2011.07 panasonic-electric-works.net/ac XE1/XE2 For board-to-fpc Narrow pitch

More information

Narrow pitch connectors (0.35mm pitch)

Narrow pitch connectors (0.35mm pitch) AXT1, 2 For board-to-board For board-to-fpc Narrow pitch connectors (0.35mm pitch) P35S Series FEATURES 1. Small size 0.35 mm pitch contributes to device miniaturization. Smaller compared to P4S series

More information

onlinecomponents.com

onlinecomponents.com YF53 For FPC/FFC* FPC connectors (0.5mm pitch) Back lock / Series New Low profile and space saving body of 1.0 mm high and mm deep (3.70 mm including the lever) and can have a minimum of four and two contacts

More information

Narrow pitch connectors (0.4mm pitch)

Narrow pitch connectors (0.4mm pitch) AXT5, 6 For board-to-fpc Narrow pitch connectors (0.4mm pitch) F4S Series FEATURES 1. Space-saving (3.6 mm widthwise) Smaller compared to F4 series (40 pin contacts): 27% smaller, 38% smaller 3. Simple

More information

For board-to-board. Narrow pitch connectors (0.5mm pitch)

For board-to-board. Narrow pitch connectors (0.5mm pitch) For board-to-board Narrow pitch connectors (0.5mm pitch) P5K/ P5K 5.8mm 5.4mm Socket Socket 4.6mm 5.0mm Header Header Note: The external appearance and PC board pattern differs between the P5K and. RoHS

More information

Narrow pitch connectors (0.4mm pitch)

Narrow pitch connectors (0.4mm pitch) For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4S Series 2.5mm Socket 2.0mm Header FEATURES 1. 2.5 mm wide slim two-piece type connector Compact and slim structure contributes overall miniaturization

More information

P4S. High reliability, space saving type, 1.5 to 3.0 mm mated height

P4S. High reliability, space saving type, 1.5 to 3.0 mm mated height For board-to-board For board-to-fpc Narrow pitch connectors (0.4mm pitch) P4S High reliability, space saving type, 1.5 to 3.0 mm mated height FEATURES 1. TOUGH CONTACT construction provides high resistance

More information

Narrow pitch connectors (0.5mm pitch)

Narrow pitch connectors (0.5mm pitch) For board-to-board For board-to-fpc Narrow pitch connectors (0.5mm pitch) P5KF 5.8mm Socket 3.3mm Header 2. Strong resistance to adverse environments! Utilizes construction for high contact reliability.

More information

For board-to-board. Narrow pitch connectors (0.5mm pitch)

For board-to-board. Narrow pitch connectors (0.5mm pitch) Automation Controls Catalog Partly to Be Discontinued: P5KS 120, 130, 160 pin contacts For board-to-board Narrow pitch connectors (0.5mm pitch) P5K, P5KS Series P5K P5KS 5.8mm 5.4mm 4.6mm 5.0mm Note: The

More information

A35P ORDERING INFORMATION. Narrow pitch connectors (0.35mm pitch) RoHS compliant. Rated current

A35P ORDERING INFORMATION. Narrow pitch connectors (0.35mm pitch) RoHS compliant. Rated current High current type For board-to-fpc Narrow pitch connectors (0.35mm pitch) A35P Rated current Number of power contacts Max. 4 pins Max. 8 pins Rated current Power contact Signal contact Total 1.5 A/pin

More information

For board-to-fpc. Narrow pitch connectors (0.4mm pitch)

For board-to-fpc. Narrow pitch connectors (0.4mm pitch) To Be Discontinued Last time buy: September 30, 2017 For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4F 3.0mm Socket 2.4mm RoHS compliant Header FEATURES 1. 0.6 mm mated height low profile two-piece

More information

Product Change Notice: Y5B/Y5BW Series FPC Connectors (0.5mm pitch) Back Lock

Product Change Notice: Y5B/Y5BW Series FPC Connectors (0.5mm pitch) Back Lock Product Change Notice: Y5B/Y5BW Series FPC Connectors (0.5mm pitch) Back Lock PEWA Ref # ACBD257 1.17.2014 About this Notice: Addition of a manufacturing plant. Effective Date: March 2014 Change Details:

More information

For board-to-fpc. Narrow pitch connectors (0.35mm pitch)

For board-to-fpc. Narrow pitch connectors (0.35mm pitch) For board-to-fpc Narrow pitch connectors (0.35mm pitch) A35S Contributes to device miniaturization and advanced functionality with 2.5 mm width, 0.35 mm pitch and 0.8 mm mated height! FEATURES 1. 0.35

More information

For board-to-fpc. High Current Connectors. 20 pins signal terminals used. With power terminal. 20 pins signal terminals can be reduced.

For board-to-fpc. High Current Connectors. 20 pins signal terminals used. With power terminal. 20 pins signal terminals can be reduced. For board-to-fpc High Current Connectors A35US With Power Terminal 4. Power terminal type means power line is ensured without having to use signal line. Contributes to space savings New Power terminals

More information

Narrow pitch connectors (0.4mm pitch)

Narrow pitch connectors (0.4mm pitch) AXK7L, 8L For board-to-fpc Narrow pitch connectors (0.4mm pitch) F4 Series 5.0mm 4.1mm 3. Improved mating strength between the socket and header The simple locking structures provided for the soldering

More information

For board-to-fpc. Narrow pitch connectors (0.4mm pitch)

For board-to-fpc. Narrow pitch connectors (0.4mm pitch) For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4S Being 2.5 mm in width, it facilitates ever-increasing device miniaturization and advanced functionality! FEATURES 1. TOUGH CONTACT construction

More information

For board-to-board. Narrow pitch connectors (0.8mm pitch)

For board-to-board. Narrow pitch connectors (0.8mm pitch) To Be Discontinued For board-to-board Narrow pitch connectors (0.8mm pitch) P8 5.88mm 6.83mm Socket Header RoHS compliant FEATURES 1. The product lineup includes low profile heights of 3.0 mm, 3.5 mm,

More information

For board-to-fpc. Narrow pitch connectors (0.4mm pitch) FEATURES 1. Slim body width of 2.0/2.2 mm contributes to space-saving.

For board-to-fpc. Narrow pitch connectors (0.4mm pitch) FEATURES 1. Slim body width of 2.0/2.2 mm contributes to space-saving. For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4US FEATURES 1. Slim body width of 2.0/2.2 mm contributes to space-saving. Soldering terminals at each corner 2. ensures high resistance to various

More information

For board-to-fpc. Narrow pitch connectors (0.4mm pitch)

For board-to-fpc. Narrow pitch connectors (0.4mm pitch) For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4S 2.5mm 2.0mm Socket Header RoHS compliant FEATURES 1. Width 2.5 mm slim two-piece type connector Compact and slim structure contributes overall

More information

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch) 20 pins signal terminals used. With power terminal. 20 pins signal terminals can be reduced.

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch) 20 pins signal terminals used. With power terminal. 20 pins signal terminals can be reduced. For board-to-fpc Narrow Pitch Connectors (0.35mm pitch) A35US With Power Terminal 5. Power terminal type means power line is ensured without having to use signal line. Contributes to space savings New

More information

Automation Controls Group Catalog. Connectors High Current Connectors. industrial.panasonic.com/ac/e/ Active Optical Connectors

Automation Controls Group Catalog. Connectors High Current Connectors. industrial.panasonic.com/ac/e/ Active Optical Connectors Automation Controls Group Catalog Connectors industrial.panasonic.com/ac/e/ 2016-2017 High Current Connectors Active Optical Connectors T A B L E O F C O N T E N T S Page Feature of TOUGH CONTACT...2 Guide

More information

For board-to-board. Narrow pitch connectors (0.8mm pitch)

For board-to-board. Narrow pitch connectors (0.8mm pitch) Automation Controls Catalog For board-to-board Narrow pitch connectors (0.8mm pitch) P8 Series 5.88mm 6.83mm Socket Header RoHS compliant FEATURES 1. The product lineup includes low profile heights of

More information

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch)

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch) For board-to-fpc Narrow Pitch Connectors (0.35mm pitch) A35US FEATURES 1. 0.6 mm Mated Height with 2.2 mm width. 2. Proprietary Fine Fitting Construction Our proprietary design provides a comfortable and

More information

For board-to-fpc. Narrow pitch connectors (0.4mm pitch)

For board-to-fpc. Narrow pitch connectors (0.4mm pitch) For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4US FEATURES 1. Slim body width of 2.0 mm/2.2 mm contributes to space-saving. 2. A wide lineup contributes to the design freedom. 3. ensures high

More information

GENERAL CATALOG CONNECTORS

GENERAL CATALOG CONNECTORS GENERAL CATALOG CONNECTORS Table of Contents Introduction... 2 Selector chart... 10 A35S Series... 16 F35S Series... 20 P35S Series... 24 A4US Series... 31 A4S Series... 35 A4F Series... 41 F4S Series...

More information

For board-to-fpc. Narrow pitch connectors (0.35mm pitch)

For board-to-fpc. Narrow pitch connectors (0.35mm pitch) For board-to-fpc AXT7, 8 Narrow pitch connectors (0.35mm pitch) F35S Series FEATURES 1. Space-saving (0.35 mm pitch) When mated, the footprint is reduced by approx. 12% from F4S series (40 pin contacts).

More information

Narrow pitch connectors (0.4mm pitch)

Narrow pitch connectors (0.4mm pitch) For board-to-board For board-to-fpc Narrow pitch connectors (0.4mm pitch) P4S Series FETURES 1. Space-saving (3.6 mm widthwise) Smaller compared to P4 series with soldering terminals (30 pin contacts):

More information

Narrow pitch connectors (0.35mm pitch)

Narrow pitch connectors (0.35mm pitch) AXE7, 8 For board-to-fpc Narrow pitch connectors (0.35mm pitch) A35S Series FEATURES 1. Small size (Terminal pitch: 0.35 mm, width: 2.5 mm and Mated height: 0.8 mm) When mated, the footprint is reduced

More information

CS Series. Automation Controls Catalog

CS Series. Automation Controls Catalog utomation Controls Catalog For board-to-micro coaxial wire Micro coaxial connectors (Space saving) CS Series 2. with strong resistance to various environments provides high contact reliability and facilitates

More information

For board-to-fpc. Narrow pitch connectors (0.4mm pitch)

For board-to-fpc. Narrow pitch connectors (0.4mm pitch) For board-to-fpc Narrow pitch connectors (0.4mm pitch) A4US Series FEATURES 1. Slim body width of 2.0 mm/2.2 mm contributes to space-saving. 2. A wide lineup contributes to the design freedom. 3. ensures

More information

Narrow pitch connectors (0.4mm pitch) Radiation noise reduced by multi-point ground and shield construction

Narrow pitch connectors (0.4mm pitch) Radiation noise reduced by multi-point ground and shield construction For board-to-board For board-to-fpc Narrow pitch connectors (0.4mm pitch) P4S Shield type Radiation noise reduced by multi-point ground and shield construction FEATURES 1. Radiation noise is reduced thanks

More information

EXCELLENT FOR MASS PRODUCTION THESE SOP IC SOCKETS RESIST VIBRATION AND SHOCK

EXCELLENT FOR MASS PRODUCTION THESE SOP IC SOCKETS RESIST VIBRATION AND SHOCK EXCELLENT FOR MSS PRODUCTION THESE SOP IC SOCKETS RESIST VIRTION ND SHOCK SOP IC SOCKETS (600 mil contacts 1.27mm pitch) SSOP IC SOCKETS (600 mil contacts 0.8mm pitch) Compliance with RoHS Directive FETURES

More information

Y3BC. Pitch 0.3 mm and double top and bottom contacts construction

Y3BC. Pitch 0.3 mm and double top and bottom contacts construction For FPC FPC/FFC connectors (0.3mm pitch) Back lock Y3BC Pitch 0.3 mm and double top and bottom contacts construction FEATURES 1. Double top and bottom contacts construction 2. Lever open/close operation

More information

Narrow pitch connectors (0.8mm pitch)

Narrow pitch connectors (0.8mm pitch) For board-to-board Narrow pitch connectors (0.8mm pitch) P8 Series 5.88mm 6.83mm Socket Header RoHS compliant 3. Ideal for portable devices, the bellows-type contacts provide a strong resistance against

More information

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch) Excellent contact reliability and mating in a super miniature size (width 1.

For board-to-fpc. Narrow Pitch Connectors (0.35mm pitch) Excellent contact reliability and mating in a super miniature size (width 1. For board-to-fpc Narrow Pitch Connectors (0.35mm pitch) S35 Excellent contact reliability and mating in a super miniature size (width 1.7 mm) FEATURES 1. Slim: width 1.7mm 2. Low profile construction:

More information

FOR CELLULAR PHONE; ULTRA LOW PROFILE TYPE FOR PORTABLE EQUIPMENT (0.5mm PITCH)

FOR CELLULAR PHONE; ULTRA LOW PROFILE TYPE FOR PORTABLE EQUIPMENT (0.5mm PITCH) FOR CELLULR PHONE; ULTR LOW PROFILE TYPE FOR PORTBLE EQUIPMENT (0.5mm PITCH) XR(3/5) SYSTEM CONNECTORS ULTR-LOW PROFILE TYPE (XR3) I/O CONNECTORS FOR PORTBLE EQUIPMENT (XR5) for portable equipment Receptacle

More information

For FPC. FPC connectors (0.3mm pitch) Back lock. FEATURES 1. Slim (width: 3.15 mm, including the lever) and low profile design (height: 0.9 mm) 3.

For FPC. FPC connectors (0.3mm pitch) Back lock. FEATURES 1. Slim (width: 3.15 mm, including the lever) and low profile design (height: 0.9 mm) 3. 0.9 For FPC FPC connectors (0.3mm pitch) Back lock Y3B/Y3BW Y3B Y3BW RoHS compliant FEATURES 1. Slim (width: 3.15 mm, including the lever) and low profile design (height: 0.9 mm) 3.15 Unit: mm 2. Mechanical

More information

For FPC. FPC/FFC connectors (0.2mm pitch) Back lock. Slim, 0.2 mm pitch and double top and bottom contacts construction

For FPC. FPC/FFC connectors (0.2mm pitch) Back lock. Slim, 0.2 mm pitch and double top and bottom contacts construction For FPC FPC/FFC connectors (0.2mm pitch) Back lock Y2B Slim, 0.2 mm pitch and double top and bottom contacts construction FEATURES 1. Slim (width: 3.15 mm) and low profile design 2. Double top and bottom

More information

For FPC. FPC/FFC connectors (0.3mm pitch) Back lock

For FPC. FPC/FFC connectors (0.3mm pitch) Back lock For FPC FPC/FFC connectors (0.3mm pitch) Back lock Y3BL 0.6 mm low profile, with soldering terminal type FEATURES 1. Low profile (0.6 mm) and slim design 2. Compatible with FPC 0.2 mm thickness 3. High

More information

Y3B/Y3BW. Slim, pitch 0.3 mm and double top and bottom contacts construction

Y3B/Y3BW. Slim, pitch 0.3 mm and double top and bottom contacts construction For FPC FPC/FFC connectors (0.3mm pitch) Back lock Y3B/Y3BW Slim, pitch 0.3 mm and double top and bottom contacts construction FEATURES 1. Double top and bottom contacts construction 2. Time and effort

More information

SYSTEM CONNECTORS ULTRA-LOW PROFILE TYPE (AXR3) I/O CONNECTORS FOR PORTABLE EQUIPMENT (AXR5)

SYSTEM CONNECTORS ULTRA-LOW PROFILE TYPE (AXR3) I/O CONNECTORS FOR PORTABLE EQUIPMENT (AXR5) System connector ultra low profile 18, 22 and 24 contacts I/O connectors for portable equipment 18, 22, 24 and 26 contacts 50 contacts FOR CELLULR PHONE; ULTR LOW PROFILE TYPE FOR PORTBLE EQUIPMENT (0.5mm

More information

SYSTEM CONNECTORS FOR W-CDMA

SYSTEM CONNECTORS FOR W-CDMA SYSTEM CONNECTORS COMPLINT WITH EIJ RC-5238 (CONNECTOR FOR IMT-2000 MOBILE PHONES) SYSTEM CONNECTORS FOR W-CDM Receptacle Signal 10 contacts with coaxial, with charging terminals ( type) Plug Signal 10

More information

FOR PC BOARD TO FLAT CABLE

FOR PC BOARD TO FLAT CABLE AXM FOR PC BOARD TO FLAT CABLE MIL CONNECTORS (AXM) Density mounting Long lever type Short lever type Compliance with RoHS Directive FEATURES 1. High density mounting is possible. Even with mounting right

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION 1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.

More information

0.4 mm Contact Pitch 1.5 mm above the board Board-to-Board /Board-to-FPC Connectors

0.4 mm Contact Pitch 1.5 mm above the board Board-to-Board /Board-to-FPC Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

0.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors

0.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors NEW.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors DF23 Series Low profile - 1.5 mm board-to-board distance Board-to-Board Application Plug Board Receptacle Plug Board FPC -.1 1.5 +.2 -.1

More information

0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors

0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors 0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors FH48 Series Supports the next generation chip V-by-One HS* by THine *High speed serial interface technology for picture

More information

2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)

2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) NEW 2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) DF59 Series Floating Structure in Three xial Directions (Board-to-Board Structure) X

More information

1mm Pitch Double Rows Low Profile Wire-to-Board Connectors

1mm Pitch Double Rows Low Profile Wire-to-Board Connectors mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION 1.0 SCOPE DDR4 DIMM SOCKET This Product Specification covers the 0.85mm centerline gold plated DDR4 DIMM edge card connector for 1.40 ± 0.10 thick memory modules..0 PRODUCT DESCRIPTION.1 PRODUCT NAME AND

More information

0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors

0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors .4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors DF4 Series Decrease in the board-occupied area Smaller width Other HRS connector DF4 3.38mm 5.mm Features 1. Higher density of the board-mounted

More information

0.4 mm Pitch, Space-saving Interface Connectors

0.4 mm Pitch, Space-saving Interface Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at your Hirose sales representative. NEW Series Small size.

More information

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

Meet requirements of USB 2.0

Meet requirements of USB 2.0 NEW Meet requirements of USB.0 UX Series Features 1. Certified to perform as required in USB.0 Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission

More information

MLVG0402 Series Engineering Specification

MLVG0402 Series Engineering Specification RoHS Pb MLVG0402 Series Engineering 1. Scope (1) Lead free type (2) SMD type zinc oxide based ceramic chip (3) Insulator over coat keeps excellent low and stable leakage current (4) Plating termination

More information

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors

1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

XH5 SMT-compatible Connectors with a 1.27-mm Pitch

XH5 SMT-compatible Connectors with a 1.27-mm Pitch New Product Half-pitch SMT Connectors (oard to oard and oard to Cable Connectors) XH5 SMT-compatible Connectors with a -mm Pitch These SMT Connectors can be mounted on the back surfaces of circuit boards.

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 1 SIM Card Connector, Hinged Type, 8 Pin, SMT, 1.50mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality

More information

0.8mm Pitch Stacking Height 5 to 9mm Connector

0.8mm Pitch Stacking Height 5 to 9mm Connector 0.8mm Pitch Stacking Height 5 to 9mm Connector FX6 Series Stacking Height: 5 to 9mm 5~9mm Features 1. Stacking Height 5 to 9mm The board to board stacking height can be set at every millimeter between

More information

PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors.

PRODUCT SPECIFICATION. This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. s-12-1177*1.0 SCOPE 1 of 8 D This specification defines the detailed requirements for the Minitek Pwr3.0 wire to wire and wire to board connectors. 2.0 APPLICABLE DOCUMENTS The following documents, of

More information

CAS SLIDE SWITCHES (SMD) FEATURES PART NUMBER DESIGNATION C A S T B 1. Please refer to the LIST OF PART NUMBERS when placing orders.

CAS SLIDE SWITCHES (SMD) FEATURES PART NUMBER DESIGNATION C A S T B 1. Please refer to the LIST OF PART NUMBERS when placing orders. SLIDE SWITHES (SMD) AS RoHS compliant INTERNAL STRUTURE Part name Material Flammability FEATURES over Polyphenylenesulphide Slider Housing Slider contact Polyamide Polyphenylenesulphide UL94V- Fixed contact

More information

0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector

0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector 0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector DF81 Series Enhanced shielding capability Grounding connection between plug connector and receptacle connector 30 contacts: 5 locations

More information

SSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN

SSL 1.1 Series. Product Data Sheet REV. 4, 2014 JUN SSL 1.1 Series Product Data Sheet REV. 4, 2014 JUN General Specification Number of Positions Current Rating 2, 4, 6P 3A (Max) Voltage Rating Dielectric Withstand Voltage Durability Color Operating Temperature

More information

SIM Card Sockets. ID1 Series. Features. Applications

SIM Card Sockets. ID1 Series. Features. Applications SIM Card Sockets ID1 Series Miniature and Thin Photograph (1) Features 1. Suited for Plug-in SIM Cards of the GSM Standard (11.11) In Europe, SIM card Subscriber Identity Modules are used for subscriber

More information

USB 3.0 Plug & Receptacle

USB 3.0 Plug & Receptacle USB 3.0 Plug & Receptacle 1. Scope: 1.1 Contents: This specification covers the requirements for product performance, test methods and quality requirements of Tyco lectronics Universal Serial Bus (USB)

More information

USB 2.0 Standard Connectors

USB 2.0 Standard Connectors USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization

More information

CARD-EDGE CONNECTORS (AXC)

CARD-EDGE CONNECTORS (AXC) XC FOR PC OR TO PC OR CR-EGE CONNECTORS (XC) Solder-dip type with flange Solder-dip type without flange FETURES 1. Long insertion and removal life. Thanks to our original contact shape, low insertion force

More information

High Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch)

High Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch) High Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch) FH16 Series FH16 Series Variation 0.3mm pitch 60 contact 0.3mm pitch 80 contact 0.3mm pitch 90 contact 0.4mm pitch 80 contact 0.5mm pitch 50 contact

More information

MLVS 0402 Series Engineering Specification

MLVS 0402 Series Engineering Specification MLVS 0402 Series 1. Scope This specification is applicable to Chip Metal Oxide Varistor in multilayer technology.the customer designed part number drawing take precedence over this specification. For RoHS

More information

SPECIFICATION FOR APPROVAL INDEX

SPECIFICATION FOR APPROVAL INDEX SPECIFICATION FOR APPROVAL INDEX COVER PAGE INDEX. 0 SCOPE...1 EXPLANATION OF PART NUMBER.1 CIRCUIT DIAGRAM & DIMENSION.....1 SPECIFICATIONS..2 TAPING PACKAGE AND LABEL MARKING...3-4 PRECAUTIONS FOR HANDLING...5-7

More information

Micro-Miniature Interface Connectors For Power Supply/Signaling

Micro-Miniature Interface Connectors For Power Supply/Signaling All non-rohs have been discontinued, or will be discontinued soon. Please check the status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW

More information

HIGH CAPACITY, LONG LIFE SUBMINIATURE SWITCH

HIGH CAPACITY, LONG LIFE SUBMINIATURE SWITCH HIGH APAITY, LONG LIFE SUBMINIATURE SWITH AVM3 P (PS) SWITHES FEATURES 10.1 Amp. high contact capacity is available Long life Precise operating (5: Pin plunger type) Flux-resistant construction with integrally

More information

INPAQ. Specification TEA10402V15A0. Product Name. ESD Guard TM TEA Series (Thin Film Air Gap) Size EIA Global RF/Component Solutions

INPAQ. Specification TEA10402V15A0. Product Name. ESD Guard TM TEA Series (Thin Film Air Gap) Size EIA Global RF/Component Solutions TEA10402V15A0 Specification Product Name Series Part No ESD Guard TM TEA Series (Thin Film Air Gap) TEA10402V15A0 Size EIA 0402 TEA10402V15A0 Engineering Specification 1. Scope TEA series is designed to

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION RECEPTACLE 1.0 SCOPE This Product Specification covers the performance requirements of the Serial Attach SCSI / High Speed Serialized host receptacle connector. 2.0 PRODUCT DESCRIPTION 2.1 PRODUCT NAME

More information

INPAQ Global RF/Component Solutions

INPAQ Global RF/Component Solutions TEA10201V05A0 Specification Product Name Series Part No ESD Guard TM TEA Series (Thin Film Air Gap) TEA10201V05A0 Size EIA 0201 TEA10201V05A0 Engineering Specification 1. Scope This specification is applied

More information

0.4 mm Contact Pitch, Board-to-FPC Connectors

0.4 mm Contact Pitch, Board-to-FPC Connectors .4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H =.8 mm type) Molded structure Two-point contact system Nov.1.217 Copyright 217 HIROSE ELECTRIC CO., LTD. All Rights

More information

USB 2.0 Standard Connectors

USB 2.0 Standard Connectors USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization

More information

microsd Card Connectors

microsd Card Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

Motocraft Multilayer Varistor

Motocraft Multilayer Varistor MLV1005 / 1608 SERIES ENGINEERING SPECIFICATION 1. SCOPE (1) Lead free type (2) SMD type zinc oxide based ceramic chip (3) Insulator over coat keeps excellent low and stable leakage current (4) Plating

More information

Cover. Slider C F S T B

Cover. Slider C F S T B RoHS compliant INTERNA STRUTURE FEATURES RoHS compliant Excellent contact stability by twin Gold-plated contact APPIATIONS Part name over Slider Housing Slider contact Fixed contact Terminal pin Material

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 1 SIM Card Connector, Hinged Type, 6 Pin, SMT, 1.85mm Profile. Page 2 1.0 SCOPE. This specification covers performance, tests and quality

More information

microsd Card Connectors

microsd Card Connectors NEW microsd Card Connectors DM Series Features Common to the entire Series. Extremely small size Small external dimensions and the above-the-board height make the connectors the smallest on the market..

More information

0.2 mm Pitch, 1.2 mm Height, FPC Connector

0.2 mm Pitch, 1.2 mm Height, FPC Connector 0.2 mm Pitch,.2 mm Height, FPC Connector FH29 Series Easy mounting with double-sided lead design.2 mm height,.55 mm mounting depth.2mm.55mm Features. Space saving 0.2 mm pitch FPC connector Super thin,

More information

FLZ CONNECTOR. 1Certified LR Connectors for FFC and FPC. Features. Specifications. Standards. 0.5mm

FLZ CONNECTOR. 1Certified LR Connectors for FFC and FPC. Features. Specifications. Standards. 0.5mm 0.5mm (.020") pitch FLZ CONNECTOR Connectors for FFC and FPC Emboss Tape Features Zero insertion force mechanism ZIF mechanism increases wear resistance and extends the connector's mating life. Heat resistant

More information

TVH AB1 Engineering Specification

TVH AB1 Engineering Specification TVH 0402 01 A1 Engineering 1. Scope GENERAL DESCRIPTION TVH 0402 01 A1 is a silicon base in ultra small SMD special packages. It is designed to protect sensitive electronics from damage or latch up due

More information

Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard

Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard NEW Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard UX60S Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features. USB 2.0 Standard data transmission

More information

minisd TM Card Connectors

minisd TM Card Connectors All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales

More information

EGA10201V05A0 Product Engineering Specification

EGA10201V05A0 Product Engineering Specification RoHS Pb EGA10201V05A0 Product Engineering 1. Scope This specification is applied to electrostatic discharge (ESD) protection. It is designed to protect the high-speed data lines against ESD transients.

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION RECEPTACLE.0 SCOPE This Product Specification covers the performance requirements of the Serial Attach SCSI / High Speed Serialized host receptacle connector. 2.0 PRODUCT DESCRIPTION 2. PRODUCT NAME AND

More information

Top-actuated (B3U-1000 Series)

Top-actuated (B3U-1000 Series) Ultra-small Tactile Switch BU Ultra-small-sized Tactile Switch with High Contact Reliability: 1.2 x x 2.5 mm (H x W x D) Industry s smallest switch* allows high-density mounting on PCBs for mobile equipment.

More information

INPAQ. Specification TVN AB0. Product Name Transient Voltage Suppressor Series TVS Series Part No TVN AB0 Size EIA 0201

INPAQ. Specification TVN AB0. Product Name Transient Voltage Suppressor Series TVS Series Part No TVN AB0 Size EIA 0201 TVN 0201 01 AB0 Specification Product Name Transient Voltage Suppressor Series TVS Series Part No TVN 020101 AB0 Size EIA 0201 TVN 0201 01 AB0 Engineering Specification 1. Scope TVN 0201 01 AB0 is a TVS

More information