Specification Sheet. Model No. : HXJ040F001. Description : 3.97" inch 480x 800 Pixel Resolution, 24bit

Transcription

1 Specification Sheet Model No. : HXJ040F001 Description : 3.97" inch 480x 800 Pixel Resolution, 24bit RGB Interface TN Panel Type TFT LCD Module,High Contrast Ratio,Option Resistance Touch Panel.

2 Revision Record Rev No Date Description V /9/23

3 CONTENTS 1. General Specifications 2. Pin Assignments 3. Electrical Specification 3.1 Absolute Maximum Ratings 3.2 Typical Operation Conditions 3.3 Backlight Circuit Characteristics 3.4 LCD Current Consumption 4. Optical Specification 4.1 LCM Optical Characteristics 4.2 Measurement system 5. Mechanical Drawing 6. Reliability Test Items 7. Packing and Storage Specification (Reference only) 8. Announcements

4 1. General Specifications No. Item Specification Unit Remark 1 LCD Size 3.97 inch - 2 Panel Type TN Resolution 480RGBx800 Pixel - 4 Display Mode Normally White Number of Colors 262K Viewing Direction ALL - Note1 7 NTSC 70% - Typ. 8 Contrast Ratio Luminance 350 cd/m2 Typ. 10 Module Size 57.14(H)x96.85(V)x3.4(D) mm Note1 11 Panel Active Area 51.84x86.4 mm Note1 12 Pixel Pitch 0.108x0.108 mm - 13 Pixel Arrangement RGB-stripe - 14 Weight g - 15 Driver IC ILI9806E-2C Driver IC RAM Size RAM less bit - 17 Light Source Interface MIPI-DSI Operating Temperature -20~ Storage Temperature -30~+80 -

5 Note 1: Please refer to the mechanical drawing 2. Pin Assignments Pin No. Pin Symbol Function 1 GND Ground 2 MIPI_DATAN0 Negative polarity of low voltage differential data signal 3 NC 4 MIPI_DATAP0 Positive polarity of low voltage differential data signal 5 GND Ground 6 MIPI_DATAN1 Negative polarity of low voltage differential data signal 7 NC 8 MIPI_DATAP1 Positive polarity of low voltage differential data signal 9 GND Ground 10 MIPI_CLKN Negative polarity of low voltage differential clock signal 11 NC 12 MIPI_CLKP Positive polarity of low voltage differential clock signal 13 GND Ground 14 NC 15 GND Ground 16 RESET Chip reset signal 17 NC 18 NC 19 VDDIO I/O Circuit Power Supply I/O 20 VCC Analog Power Supply for LCM2.8V 2.8V 21 NC 22 LED_A Backlight anode 23 LED_K Backlight cathode 24 NC

6 3. Electrical Specification 3.1 Absolute Maximum Ratings Item Symbol Value Unit Remark Analog Power Supply Voltage VCI -0.3~+3.3 V - Digital Power Supply Voltage I/O Power Supply Voltage I/O VDD -0.3~+3.3 V - IOVCC -0.3~3.3 V Typical Operation Conditions Item Symbol Min. Typ. Max. Unit Analog Supply Voltage VCI V Digital Supply Voltage I/O Supply Voltage Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage VDD V IOVCC / V V IH 0.8*IOVCC - IOVCC V V IL 0-0.2*IOVCC V V OH 0.8*IOVCC - - V V OL *IOVCC V

7 3.3 Backlight Circuit Characteristics Item Symbol Min. Typ. Max. Unit LED Current I B ma LED Voltage Vf V Power Consumption P BL - - mw 3.4 LCD Current Consumption Item Symbol Typ. Max. Unit Full Mode VCI - - ma VCI=2.8VIOVCC=2.8V Interface TN Type=>All Black Pattern. TN=> IPS Type=>All White Pattern. IPS=> Temperature2525 Sleep Mode VCI - - ua VCI=2.8VIOVCC=2.8V DC/DC converter is enabled. Internal oscillator is started and panel scanning is started. IC Temperature2525

8 4. Optical Specification 4.1 LCM Optical Characteristics Item Symbol Condition Min. Typ. Max. Unit Viewing Angle Range Left Right Top L R T CR degree Bottom B Response Time Contrast Ratio Ton+Toff ==0-35 ms CR == Luminance L == cd/m 2 White W x W y Color Chromaticity (CIE1931) Red Green R x R y G x Normal == G y Blue B x B y Uniformity U L == % Flicker - - No Visible -

9 4.2 Measurement system LCM Viewing Angle Viewing angle is the angle at which the contrast ratio is greater than 10.The angles are determined for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the LCD surface Response time Response time is the time required for the display to transition from white to black (Rising time, Tr) and from black to white (Falling time, Tf) for additional information Contrast Ratio (CR) Contrast Ratio (CR) is defined mathematically as:

10 Surface Luminance with all white pixels Contrast Ratio= Surface Luminance with all black pixels Surface luminance is the center point across the LCD surface 500mm from the surface with all pixels displaying white.

11 YU XL YD XR XR XL YD YU A A B C BL TP TP A.A/ICON TP V.A 2.50 LCD AA86.40 BL TP TP V.A TP A.A/ICON LCD AA ±0.1 JL JL ± ± G D D G D1_N D G CLK_N G RESET I 16 VDD L 19 L 20 NC X 23 Y 24 XR B C 5. Mechanical Drawing D E Operating temperature:-20 ~70 Storage temperature:-30 ~ A REV 2 Circuit Diagram PART DESCRIPTION DESIGNED CHECKED PART NUMBER 0 A SIGN DESCRIPTION PIC DATE APPROVED MODEL NAME 3 4 LCM ICbanQ Inc. UNIT mm 5 SCALE rd ANGLE HXJ040F /IPS/480*800 SIZE SHEET NUMBER E A4 1of1 DRAWING REV. 6 A PART NUMBER VER. N/A D

12 6. Reliability Test Items Test Item Test Condition Test result determinant gist High temperature Inspection after 2~4hours storage 80324H storage at room temperature, Low temperature storage H the sample shall be free from defects:,lcd High temperature operation 70324H 2~4 Low temperature operation H 1.Air bubble in the LCD; High temperature /humidity Thermal Shock Vibration Test ESD test Remark: 603,90%3%RH24H -30/0.5h~+80/0.5h for a total 24 cycles Frequency 10Hz~55Hz~10Hz Amplitude 1.5mm, XYZ direction for total 1H (Packing condition) 2KV, Human Body Mode, 150pF/330 8KV, Air Mode, 150pF/330 2.Non-display; 3.Glass crack; 4. The electrical characteristics requirements shall be satisfied. 1. The test samples should be applied to only one test item. 2. Sample size for each test item is 2pcs. 2

13 3. Failure Judgment Criterion: Basic Specification, Electrical Characteristic, Mechanical Characteristic, Optical Characteristic. :,,,

14 7. Packing and Storage Specification(Reference Only) 7.1 acking Method (1) (2) (3) (4) (5) (6) 1. Put module into tray cavity.. 2. Tray stacking..

15 3. Put 1 foam under the tray stack and 1 foam above.. 4. Fix the cardboard to the tray stack with adhesive tape.. 5. Put the tray stack into carton.. 6. Carton sealing with adhesive tape Storage Method 1.tore in an ambient temperature of 23C5C, and in a relative humidity of 55% 15%. Don't exceed 12 months and expose to sunlight or fluorescent light. 235C 55%15% Store in a clean environment, free from dust, active gas, and solvent. 3. Store in antistatic container. 8. Announcements 1.Do not attempt to disassemble or process the LCD module. 2.Do not make extra holes on the printed circuit board, modify its shape or change the positions of components to be attached 3.xcept for soldering the interface, do not make any alterations or modifications with a soldering iron; Ensure welding temperature at 320 C to 350 C, the welding time

16 control within the 10 s, welding note don't stay too long in the same place to avoid scald FPC. 320C-350C 10S FPC 4. Other matters in not clear before use, please contact our staff to guide. -END-