AnyBus-PCI Profibus DPV1 Master

Transcription

1 AnyBus-PCI Profibus DPV1 Master Package Contents The AnyBus-PCI Profibus DPV1 Master package consists of the following items: Anybus-PCI Profibus DPV1 Master card This installation leaflet CD-ROM containing software drivers, SDK and documentation Warning! The AnyBus-PCI Profibus DPV1 Master card contains ESD (Electrostatic Discharge) sensitive components. Be sure to observe ESD precautions when installing the card; do not touch any circuits or connectors, and handle the card only by its edges. PCI Card Overview Profibus Connector Config Connector Status LED:s PCI Edge Connector Status LED:s # Indication State Meaning 1 Active PCI card not active Green PCI card active (i.e. Transport Path open) 2 Application Led - Controlled by software (ABS_SetApplicationLed()) 3 Master Status Green Operate Mode Green, flashing Clear Mode Stop Mode line 4 Token Hold Green Master has the token Master does not have the token 5 Database Status Green Database OK Green, flashing Database download in progress Database invalid No database downloaded 6 Communication Status Green Data exchange with all configured slaves Green, flashing Data exchange with at least one configured slave Bus control error (possible short circuit or configuration error) No data exchange with any of the configured slaves

2 Software Driver Installation! Important: It is strongly recommended to perform the software installation prior to installing the PCI card into the PC. This ensures that the software drivers are available when the card is detected by the system. Administration rights are required when installing the drivers on windows NT, 2000 or XP. To avoid software conflicts, make sure that no other AnyBus-PCI drivers are installed in the system (e.g. the CoDeSys drivers) 1. Double click on Setup.exe. (This file will be executed automatically when inserting the supplied software CD-ROM provided that the AutoPlay feature is enabled.) 2. Click Browse to select a different installation path, or click Next to start the installation process. 3. A progress bar will illustrate progress of the installation. 4. Finished. Shut down the computer and proceed with the hardware installation steps described on the following pages.

3 Hardware Installation Warning! Unplug the AC power when adding or removing expansion cards or other system components. Failure to observe this may result in physical injury or damage to computer components. 1. Unplug AC power and remove system cover 2. If present, remove the bracket opposite the PCI slot. Keep the screw for later use. 3. Align the card connector with the slot and press firmly until the card is completely seated 4. Secure the card connector to the chassis using the screw removed earlier! Important: To ensure trouble-free operation, the front plate of the card must be screwed together with the system cover. The system cover must also be grounded in compliance with local regulations. 5. Re-attach the system cover and AC power

4 Technical Specification General Half length 33Mhz PCI card 3.3 & 5V support (Universal keyed add-in) Plug & Play Interrupt or Polled operation 0 to +55C operating temperature System Requirements Windows NT 4.0 SP3 or higher or above,windows 98, Windows 2000, Windows ME, or Windows XP 486 DX 66 or higher recommended 16 MB RAM (32 MB recommended) 256-color SVGA (800x600) display CD-ROM drive Available PCI-slot Mouse or tablet Software Drivers Supports the AnyBus-S API (SDK included) Multiple AnyBus PCI cards supported.gsd-file for Profibus configuration tool included on CD Profibus Interface Details Optically isolated Profibus RS485 interface Acyclic communication (DPV1) Alarm handling (DPV1) Control up to 125 slaves Node ID set via fieldbus or by software Up to 2048 bytes input & output data 2kB or 4kB DPRAM modes Extended mode allowing up to 1536 bytes of I/O to reside in DPRAM EMC Compliance Emission: EN :2001 Immunity: EN :2001 CE marked Recommended Profibus connectors: Profibus Plug 180, order number 6GK FC00, from Profibus Max standard, part number , from

5 Support HMS Sweden Phone: +46 (0) Fax: +46 (0) HMS America Phone: Fax: Profibus User Organization Technical questions regarding the Profibus fieldbus system should be addressed to your local Profibus User Organization. Online: HMS Germany Phone: Fax: HMS Japan Phone: Fax: Downloads Manuals,.GSD-files, software drivers etc., are available for download at