All licenses required for the H/W implementation and managing servers should be included as part of the solution.

Transcription

1 3. Detailed Technical Specifications NOTE: Bidders should offer models with a standard onsite warranty of three years, extended warranty for 4th, 5th, 6th and 7th years along with OEMs Back-to-Back support. a) Server Type 1: Rack Mounted Servers 11 No s (DC: 8 Nos. and DR: 3 Nos.) Processor & Architecture Cache RAM SSD s Single CPU Intel Xeon Gold Processor 6cores 3.4 GHz achievable using latest version processor MB L3 on chip Cache 32 GB DDR4 RAM 3 x 960 GB SSD drives with 6G SATA and with 3DWPD RAID Support Should support Raid 0, 1, 5 DVD Writer Network HBA Card Ports PCI Express slots Remote Management Power Other DVD RW 4 x 10/100/1000 on board Giga bit Ethernet ports or more 2 No s of 10Gbps Ethernet ports (UTP/Copper) or more 1x RJ-45 10/100/1000 Mb Ethernet systems for management port Dual Port 16Gbps HBA Card USB 3.0 Ports - 3 Nos, Serial port -1 No. Server should have 4 No s PCI express 3.0 slots Server should support remote management Should support browser based Graphical Remote Console; Virtual Power button, Remote boot using USB / CD/ DVD Drive and should be capable to offer upgrade of software and patches from a remote client using Media / image/folder; Server power capping and historical reporting; Should have support for multifactor authentication. Redundant hot swap power supplies and cooling fans Other standard required cables / connectors (Indian power cards, USB cable, etc) Licenses All licenses required for the H/W implementation and managing servers should be included as part of the solution. Warranty (3+2+2) years onsite warranty b) Server Type2: Rack Mounted Servers 04 No s (DC: 4 Nos.) Processor & Architecture Cache RAM SSD s 2 CPU Intel Xeon Gold Processor 6cores 3.4 GHz achievable using latest version processor MB L3 on chip Cache 64 GB DDR4 RAM. 3 x 960 GB SSD drives with 6G SATA and with 3DWPD RAID Support Should support Raid 0,1,5 DVD Writer Network HBA Card Ports PCI Express slots DVD RW 4 x 10/100/1000 on board Giga bit Ethernet ports or more 2 No s of 10Gbps Ethernet ports (UTP/Copper) or more 1x RJ-45 10/100/1000 Mb Ethernet systems for management port Dual Port 16Gbps HBA Card USB 3.0 Ports - 3 Nos, Serial port -1 No. Server should have 4 No s PCI express 3.0 slots

2 Remote Management Power Other Server should support remote management Should support browser based Graphical Remote Console; Virtual Power button, Remote boot using USB / CD/ DVD Drive and should be capable to offer upgrade of software and patches from a remote client using Media / image/folder; Server power capping and historical reporting; Should have support for multifactor authentication. Redundant hot swap power supplies and cooling fans Other standard required cables / connectors (Indian power cards, USB cable, etc) Licenses Warranty c) All licenses required for the H/W implementation and managing servers should be included as part of the solution. 7 (3+2+2) years onsite warranty Server Type 3: Rack Mounted Servers 15 No s (DC: 12 Nos. and DR: 3 Nos.) Processor & Architecture Cache RAM SSD s Storage Controllers 2 CPU Intel Xeon Gold Processor 10 cores 2.4 GHz achievable using latest version processor MB L3 on chip Cache 64 GB DDR4 RAM. 8 x 960 GB SSD drives with 6G SATA and with 3DWPD Should be supplied with 6Gbps Raid Controller with 2GB Flash Backed Write Cache. RAID Support Should support Raid 0,1,5,6 DVD Writer Network HBA Card Ports PCI Express slots Remote Management Power Other DVD RW 4 x 10/100/1000 on board Giga bit Ethernet ports or more 2 No s of 10Gbps Ethernet ports (UTP/Copper) or more 1x RJ-45 10/100/1000 Mb Ethernet systems for management port Dual Port 16Gbps HBA Card USB 3.0 Ports - 3 Nos, Serial port -1 No, Serial port- 1 No Server should have 4 No s PCI express 3.0 slots Server should support remote management Should support browser based Graphical Remote Console; Virtual Power button, Remote boot using USB / CD/ DVD Drive and should be capable to offer upgrade of software and patches from a remote client using Media / image/folder; Server power capping and historical reporting; Should have support for multifactor authentication. Redundant hot swap power supplies and cooling fans Other standard required cables / connectors (Indian power cards, USB cable, etc) Licenses Warranty All licenses required for the H/W implementation and managing servers should be included as part of the solution. 7 (3+2+2) years onsite warranty d) Server Type 4: Rack Mounted Servers 8 No s (DC: 6 Nos. and DR: 2 Nos.) Processor & Architecture Cache RAM 2 CPU Intel Xeon Gold Processor 10 cores 2.4 GHz achievable using latest version processor MB L3 on chip Cache per CPU 128 GB DDR4 Registered RAM. Page 2 of 38

3 SSD s GPU Card 8 x 960 GB SSD drives with 6G SATA and with 3DWPD NVIDIA Quadro 12 GB Graphics card Storage Controllers Should be supplied with 6Gbps Raid Controller with 2GB Flash Backed Write Cache. RAID Support Should support Raid 0,1,5, 6 DVD Writer Network HBA Card Ports PCI Express slots Remote Management e) Power Other Licenses Warranty DVD RW 4 x 10/100/1000 on board Giga bit Ethernet ports or more 2 No s of 10Gbps Ethernet ports (UTP/Copper) or more 1x RJ-45 10/100/1000 Mb Ethernet systems for management port Dual Port 16Gbps HBA Card USB 3.0 Ports - 3 Nos, Serial port -1 No, Serial port- 1 No Server should have 4 No s PCI express 3.0 slots Server should support remote management Should support browser based Graphical Remote Console; Virtual Power button, Remote boot using USB / CD/ DVD Drive and should be capable to offer upgrade of software and patches from a remote client using Media / image/folder; Server power capping and historical reporting; Should have support for multifactor authentication. Redundant hot swap power supplies and cooling fans Other standard required cables / connectors (Indian power cards, USB cable, etc) All licenses required for the H/W implementation and managing servers should be included as part of the solution. 7 (3+2+2) years onsite warranty Server Type5: Rack Mounted Servers 02 No s (DR: 2 Nos.) Processor & Architecture Cache RAM SSD s 2 CPU Intel Xeon Gold Processor 6 cores 3.4 GHz achievable using latest version processor MB L3 on chip Cache 64 GB DDR4 RAM. 9 x 960 GB SSD drives with 6G SATA and with 3DWPD RAID Support Should support Raid 0,1,5 DVD Writer Network HBA Card Ports PCI Express slots Remote Management Power DVD RW 4 x 10/100/1000 on board Giga bit Ethernet ports or more 2 No s of 10Gbps Ethernet ports (UTP/Copper) or more 1x RJ-45 10/100/1000 Mb Ethernet systems for management port Dual Port 16Gbps HBA Card USB 3.0 Ports - 3 Nos, Serial port -1 No. Server should have 4 No s PCI express 3.0 slots Server should support remote management Should support browser based Graphical Remote Console; Virtual Power button, Remote boot using USB / CD/ DVD Drive and should be capable to offer upgrade of software and patches from a remote client using Media / image/folder; Server power capping and historical reporting; Should have support for multifactor authentication. Redundant hot swap power supplies and cooling fans Page 3 of 38

4 Other Licenses Other standard required cables / connectors (Indian power cards, USB cable, etc) All licenses required for the H/W implementation and managing servers should be included as part of the solution. Warranty 7 (3+2+2) years onsite warranty f) Server Type 6: Rack Mounted Servers 1 No s (DR: 1 No.) Processor & Architecture Cache RAM SSD s GPU Card 2 CPU Intel Xeon Gold Processor 10 cores 2.4 GHz achievable using latest version processor MB L3 on chip Cache per CPU 128 GB DDR4 Registered RAM. 9 x 3.84 TB SSD drives with 6G SATA and with 3DWPD NVIDIA Quadro 12 GB Graphics card Storage Controllers Should be supplied with 6Gbps Raid Controller with 2GB Flash Backed Write Cache. RAID Support Should support Raid 0,1,5, 6 DVD Writer Network HBA Card Ports PCI Express slots Remote Management Power Other Licenses Warranty g) DVD RW 4 x 10/100/1000 on board Giga bit Ethernet ports or more 2 No s of 10Gbps Ethernet ports (UTP/Copper) or more 1x RJ-45 10/100/1000 Mb Ethernet systems for management port Dual Port 16Gbps HBA Card USB 3.0 Ports - 3 Nos, Serial port -1 No, Serial port- 1 No Server should have 4 No s PCI express 3.0 slots Server should support remote management Should support browser based Graphical Remote Console; Virtual Power button, Remote boot using USB / CD/ DVD Drive and should be capable to offer upgrade of software and patches from a remote client using Media / image/folder; Server power capping and historical reporting; Should have support for multifactor authentication. Redundant hot swap power supplies and cooling fans Other standard required cables / connectors (Indian power cards, USB cable, etc) All licenses required for the H/W implementation and managing servers should be included as part of the solution. 7 (3+2+2) years onsite warranty S.No Operating System Licenses Details Nos. 1 Red Hat Enterprise Linux 7.2 with Media and Licenses and 7 years subscription and support 2 Red Hat Enterprise Linux 7.2 / SUSE Linux Enterprise Server 12 with Media and Licences and 7 years subscription and support 3 Windows Server Standard Edition 2016 (It should support degradable to 2012 Standard) with 5 concurrent users, Media and Licenses 4 Windows 10, 64bit professional media and licenses - 02 Nos h) S.No. Storage Specifications 1 No. (DC: 1 No.) Page 4 of 38

5 1 Architecture:: Should have minimum of 4 host ports per controller of 16 Gbps each. 2 Architecture:: Storage Should have minimum 4 No s of 10Gb Ethernet using In-built adapter or through Redundant Gateway from the Same vendor/brand. Performance Benchmarking of minimum (Latest SPECsfs standards) ops/sec throughputs or equivalent may be offered in case vendors offers solution using external gateway. 3 Storage Controller: Dual controller configuration running in an active-active mode. 4 Storage Controller: Non-disruptive controller failover should be supported. 5 Back-end Connectivity (Disk Connectivity): The Storage should have 12 Gbps SAS connectivity/ 16 Gbps Fiber Channel connectivity/fibre Channel over Ethernet. 6 Protocol Support: The Storage solution should support multiprotocol (block-based and filebased access) incorporating Fibre Channel (FCP), iscsi, NFS and CIFS using In- built adapter or through Redundant Gateway from the Same vendor/brand. Required Protocol licenses should be included for entire capacity of the array. Applications may utilize two or more of these protocols simultaneously. 7 Cache: Vendor should provide minimum 32 GB of Controller Cache and scalable to 64 GB controller cache within the same box. SSD/Flash and Gateway appliance cache are not considered to be Controller Cache. The data in cache shell not be lost in case of power failure. Specify the mechanism used. In case of battery backup, a minimum of 48 hours of backup shall be provided or shall de-stage to disk. 8 LUNs: Should support minimum of 4096 LUNS 9 LUNs: Should provide capability for dynamic expansion and shrinking of LUNs. 10 LUNs: Storage should have ability to stripe the data across multiple raid groups in order to improve performance LUN binding and masking license for at least 40 servers. Nondisruptive online microcode upgrades without impact on any application connected to storage system. 11 Storage: 50 TB of usable storage capacity using SAS HDDs on RAID 6 with 6D+2P configuration. 13 I/O: Automatic rerouting of I/O traffic from the host in case of primary path failure. The I/O interfaces from the servers shall be load balanced. 14 Storage: Scalable to 100 TB under the same controller pair, keeping the already configured disk drives. The future scalability should be supported with all software / licenses / cables and connectors for future upgrade 15 Disk Drives: 1.2 TB 10K rpm SAS HDD s, used to configure usable 50 TB storage capacity.. 16 Disk Drives: Proposed Storage should be configured with sufficient Spare Drives using a formula of one spare drive for every 10 Drives. 17 RAID Support: Intelligent hardware RAID controllers to implement hardware mirroring at storage controller level, It should support RAID 0, 1, 5, 6, RAID Support: Should allow dynamic RAID configuration and expansion. 19 RAID Support: RAID-level intermixing for optimal protection, performance to be provided. 20 RAS: Non-disruptive component replacement/upgrade of interfaces, disk controllers, disk drives, power supply & battery systems, cooling fans and microcode updates. There shall be redundant power supplies with provision for connecting to power inputs from different sources. Pro-active maintenance, self-monitoring, self diagnosing and wherever possible, self repairing features wherever possible. Call Home feature to send alert messages to vendor support organization 21 Other: Interoperability Matrix should be publicly available. The storage system shall be guaranteed to be fully compatible for Host Bus Adapters. Clustering Solution and OS offered with the Servers. SAN storage that have reached end-of-life/end of sale shall not be quoted. 22 Storage Partitions: Licenses for 64 storage partitions should be provided. Page 5 of 38

6 23 OS Support: The storage subsystem that is configured should be able to connect to RHEL,SUSE Linux and Microsoft Windows Server edition 2012 and Cluster Support: The storage array should be provided with support for multiple clusters of various operating systems mentioned above. 25 Connectivity: The Storage box should be connected to the servers through SANswitches (Specifications of the SAN Fabric Chassis is mentioned). 26 SAN Support: FC Switches support to be provided. 27 LAN Support: LAN Switch support to be provided. 28 Redundancy and Data Protection: No single point of failure. 29 Concurrent maintenance: Redundant and hot swappable components. 30 Redundancy and Data Protection: Dual controllers, cluster failover, and path failover support. 31 Redundancy and Data Protection: The LUN or Volume ownership through one controller should be able to be switched to the other controller in the event of storage failure. 32 Storage Management Software: Vendor specific software to be provided. Should be best in class. 33 Storage Management Software: Easy configuration and monitoring the storage system from a browser-based interface. 34 Storage Management Software: Centrally Managed using Central management interface (GUI). 35 Storage Management Software: Web-enabled monitoring via any browser. 36 Storage Management Software: Configure volumes, perform routine maintenance and add new enclosures and capacity without downtime on data accessibility. 37 Storage Management Software: Expand logical volumes without disrupting operations. 38 Storage Management Software: Flash Copy to make point-in-time copies of logical volumes 39 Support for Dynamic Volume Expansion: Dynamic Capacity Expansion. 40 Support for Dynamic Volume Expansion: Dynamic RAID Level Migration. 41 Support for Dynamic Volume Expansion: Point in time Copy should be supported. 42 Support for Dynamic Volume Expansion: Multi Path and Load Balancing. 43 Redundancy and Hot Replacement: Disk Drives 44 Redundancy and Hot Replacement: Power Supplies. 45 Redundancy and Hot Replacement: Fans. 46 Redundancy and Hot Replacement: Controller Boards (Dual Configuration). 47 Redundancy and Hot Replacement: Battery. 48 Other Features: Should support full volume copy 49 Other Features: Flash copy/snapshot and volume Copy licenses to be provided for entire capacity that is supported for the storage subsystem 50 Other Features: Thin-provisioning should be provided and the User interface should be able to show the allocated and actual used space with-out need for logging into individual servers 51 Other Features: Non-disruptive LUN expansion 52 Other Features: Should offer iscsi connectivity whenever required. 53 All required cables, connectors and labeling shall be supplied and configured with the storage and servers as per TIA-942 standards. 54 Warranty: 7 (3+2+2) years on-site warranty i) S.No. 48 port SAN Storage Switch Specifications 2 No s (DC: 2 Nos.) Page 6 of 38

7 j) S.No. 1 Two numbers SAN Switches to be configured in high availability mode. 2 SAN switch with minimum 48 ports, 16 Gbps full duplex ports, populated and active SFP/SFP meters FC patch cables should be supplied for all the ports 4 All the ports should operate at 16Gbps and auto-negotiate to 4/8/16 Gbps FC speeds. 5 Should perform Non disruptive Microcode / firmware Upgrades and hot code activation. 6 The switch must be capable of creating hardware-based isolated environments with a single physical SAN fabric or switch. Each such isolated environment or Virtual SAN/fabric within the switch should be capable of being zoned as a typical SAN and should be able to maintain its own fabric services, its independent Zoning database, Name Servers and Fabric shortest path first (FSPF) processes etc. 7 Should support encryption of data on tapes. 8 Support for web based management GUI, CLI, SMI-S, SNMP, Secure Socket Layer (SSL) Secure Shell (SSH) should also Support. 9 The switch must be able to support port aggregation of minimum 8 physical Fiber Channel ports to provide aggregated links. 10 Switch should provide advanced Zoning capabilities. 11 Switch should allow health, and performance monitoring capabilities in real time example port utilizing higher bandwidth. 12 It shall be possible to configure the switches with alerts based on threshold values for temperature, fan status, Power supply status, port status, etc. 13 Switch shall support POST and online/offline diagnostics including RAS trace logging, environmental monitoring, non-disruptive daemon restart, FC Ping and path info (FC Trace Route), port mirroring (SPAN Port). 14 The SAN Switch should support HW Compression for FC-IP functionality and IP Sec encryption. 15 The switch must support role-based administration by allowing different administrators different access rights to the switch. 16 Throughput of the each switch should be 768 Gbps or more 17 All required cables, connectors and labeling shall be supplied and configured as per TIA-942 standards. 18 One 100/1000 Mb Ethernet port (UTP, RJ45); one RS-232 port (RJ45); one USB port (for additional firmware/log/configuration files storage). 19 Two fans built into each power supply, 2+2 cooling redundancy with two power supplies, Up to two redundant hot-swap power supplies. 20 Warranty: 7(3+2+2) years on-site warranty Tape Library Specifications 1 No. (DC: 1 No.) 1 Tape Library: should be rack mountable 2 Tape Library: should have 02 No s LTO7 FC Tape drives. 3 Tape Library: Vender should provide tape library with minimum of 50 slots. Tape Library: Tape Library should be scalable to minimum of 4 drives. 4 Tape Library: Tape Library should be scalable to minimum 100 slots. 5 Tape Drive: Offered LTO7 drive in the Library shall conform to the Continuous and Data rate matching technique for higher reliability. 6 Speed: Offered LTO7 drive shall support 300 MB/sec in Native mode and 750MB/sec in 2.5:1 Compressed mode. 7 Tape Library: All the 50 slots should be in active mode (Accessed). Page 7 of 38

8 8 Tape Library: The library should have capability to split logically. The required licenses shall be provided. 9 Tape Library: Drives should have native FC support, preferably it should be of the same brand. 11 Drives: 4 Nos. of LTO Gen 7 drives to Installed. Page 8 of 38

9 12 Drives: Tape Library should be able to support Gen 6 Drives also in future. 13 Robotics: All the slots and Drives must be seamlessly accessible through the single Robotics..configured with redundant robotics 14 Connectivity: Offered Tape Library should be integrated with the other Servers and storage to back up all the data from the SAN to The Tape library using the required back up S/w via LAN or LAN Free. The Bidder needs to supply the necessary Back up s/w to integrate this functionality. 15 Supported host platforms: Windows 2008/2016 Server, IBM AIX, SUN Solaris and RHEL Linux environments. 16 Cartridges: Vendor should provide 50 No's of LTO Gen-7 Tape Cartridges along with vendor printed and pasted bar codes. 17 Cartridges : Vendor should supply 5 Cleaning cartridges along with vendor printed and pasted bar codes 18 Bar Code Reader: The Library should have an integrated Bar Code reader. 19 Library management: The library should accommodate browser based management that helps in monitoring the tape library. 20 Reliability: The offered tape library must have a high reliability ie MCBF (mean cycles between failures) more than 3,000,000 cycles. 21 Intelligent Monitoring: The overall solution with Tape Library and the backup s/w integration should have features like Intelligent monitoring management and diagnostics 22 Barcode Reader and Mail slots: Tape library shall support Barcode reader and min 10 configurable mail slots- to deliver easy, secure access to individual tape cartridges without interrupting library operations. Mail slots must be scalable to min 30 once the Library is Fully scaled up. 23 Hardware Partition: Should support for partitioning so that each drive can be configured in a separate partition thus providing the ability to utilize a single library in a variety of applications.. All the necessary License or hardware for min EIGHT partitions must be provided along with the library. 24 Back up SW Support: Tape Library to support leading Backup software. 25 Power Supply and Cooling: Redundant hot swappable power supply to be provided. 26 Cartridge capacity: LTO7: 6 TB native; up to 15 TB compressed (with 2.5:1 compression ratio) 27 All required cables: connectors and labeling shall be supplied and configured with the tape library as per TIA-942 standards. 28 Total backup capacity: Up to 288 TB native; up to 720 TB compressed (with 2.5:1 compression) 29 7 (3+2+2) years Onsite Warranty k) S.No Backup Software Specifications - 01 No. (DC: 1 No.) 1 The proposed Backup server Solution shall be available on 64-bit OS platforms and shall have the capability to support for all major Operating systems.(linux/unix/windows) 2 It should provide a user-friendly enterprise console that enables the administrator to manage the Storage Manager from any platform in the enterprise via a Web-based interface. This should allow the administrator to navigate, logon and perform function. 3 Full backup of data base systems shall be possible to be taken without bringing the production system down, with full data base consistency and without affecting the performance to the users in any way. 4 The proposed backup solution must not require separate licensing when upgrading from a lower end server (1-2 CPU-based server) to higher end server (4and CPU-based server) Page 9 of 38

10 5 Restore feature: System shall be configured for full restoration of the backed up data to the respective storage. 6 Backup software shall support and configured Scheduled automated restores to perform periodic restore drills. 7 Backup software shall offer consistent Graphic user interface 8 Backup Software shall offer Extensive-reporting capabilities to monitor the health of Backups. 9 The backup software should support either the Capacity based model or Application based model of licensing. The vendor should provide the either of two for online backup. The backup software licenses should be provided with 500 TB backup capacities. 10 The proposed backup solution supports the capability to write up to 32 data streams. 11 The backup software must provide near real time monitoring and reporting of the backup environment. It should provide a graphical representation and monitoring of trends and current status. 12 The proposed backup solution support de-multiplexing of data cartridge to another set of cartridge for selective set of data for faster restores operation to client/servers. 13 Software shall support event notification to notify backup administrator about events like Job Failed or Job aborted etc 14 Backup software shall support LAN FREE backup in SAN environments. The proposed backup solution shall be configured with unlimited client and media licenses for both SAN based backup and LAN based backup. 15 The proposed backup solution shall be configured with unlimited client and media licenses for both SAN based backup and LAN based backup. 16 Software shall support Scanning of Tape media to rebuild catalogs and indexes in case of disaster. It shall be supported thru Software GUI or through Command line utilities 17 Software shall offer centralized management console to remotely monitor backups 18 The proposed backup solution has in-built media management and supports cross platform device and media sharing in SAN environment. It provides a centralized scratched pool thus ensuring backups never fail for media. 19 Software shall support Raw device backup of Windows/Linux/UNIX based system 20 The proposed backup solution has certified hot-online backup solution for different type of Enterprise databases and applications (Oracle and DB2) 21 The Backup software should use the RDBMS to store the catalogue and configuration information. 22 The Backup software should have the capability to dynamically add the storage space for the RDBMS, which stores the catalogue & configuration information. 23 The backup software should have capability to configure automated backups with customized frequency based scheduling based on the backup policy. In addition the software should also have capability for user-initiated backup 24 The Software should have a capability to define Polices centrally based on Business requirements. E.g. What Data to be backed up, where to store the Data, Retention period & Number of versions 25 The software should be flexible and configurable to adapt to organization s backup policy. 26 The software should be Fast file-system backups with high performance multi-streaming 27 The Polices defined centrally should be applied to Data & not restricted to tape media s. This is to optimally reuse the tape media. The proposed backup solution should allow creating tape clone facility after the backup process. Page 10 of 38

11 28 The Software should use the available media efficiently by writing the full and incremental data on to the same tape as long as the space is available on the tape media 29 The Backup Software shall provide web / Java based client interface, which can be accessed from any location. 30 The backup software should have application awareness for software like Databases and Messaging solution provided by the vendor. 31 The software should have capability to retrieve selectively based on search criteria 32 The software should have capability to backup the entire configuration of the server and restore it from scratch the entire system including configuration when in a scenario of hardware failure 33 The backup software should also include fully fledged Media Library Management, including complete and automated offsite tape management, creation of pickup and drop lists, tracking of tapes, etc 34 The software should support Encryption & should have provision to delegate Administrative task. 35 The backup software must be licensed to use disk, LTO Tape libraries and Virtual Tape Libraries for backups via SAN or through NDMP. 36 The proposed backup software should use the same API for software or hardware DE duplication 37 The backup software should support backup to disk /tape library/vtl / DE duplication Device via Fiber channel 38 The backup software should support IP sec encryption for the VTL / Disk device 39 The software must have the feature to backup on to the Diskpool and later migrate to the Tape without intervention. The Diskpool space should not be limited to a physical Disk drive capacity. 40 Must support storage protocols such NDMP (version 3 & above). Please provide interoperability matrix with storage appliance firmware/os release compliance. Specify specific features advantages aligned with the storage vendors 41 Must be able to utilize Direct Access Restore for NDMP technologies to facilitate single file level restore. 42 Should support 5 ways NDMP Backup. 43 The software inbuilt reporting tool must has the ability to create customize reports without any additional purchase of another reporting module or 3rd party reporting module 44 Allows full VMware VADP backup by utilizing LAN, SAN and Hot Add advanced transport mechanisms to optimize data transfer of virtual machine backups. 45 Support for server virtualization especially VMware & Hyper-V 46 Must be integrated with VMware VADP with D2D2T layout. Must be synchronized with VMware VADP for data integrity. 47 Must be capable of block level backups for Bare Metal Recovery of Physical servers 48 Proposed backup solution should also support creating the offline image of both physical & virtual server in offline mode on VMware, Hyper-V, Oracle & Virtual BOX as part & planning of Application level DR 49 Ability to support and manage snap shot based backup, and file based backup under one roof while maintaining granular file level recovery. 50 The backup software should support Non Staged Granular recovery in VMware 51 The proposed backup software should give the option to allow de duplication to be done either on the Application Server or on the Backup Server or at the Target Device. 52 The proposed backup software should support contextual search based on meaning. 53 The proposed backup solution shall support synthetic full backup / Virtual full backups. Page 11 of 38

12 54 The proposed backup solution must support at least AES 256-bit encryption capabilities. 55 The backup software should support the Recurrence type Every Minute which will support more frequent backup jobs. 56 The backup software should support Different Time Zone within enterprise environments, where backups can be scheduled across different time zones from the same single schedule 57 The Backup software should be able to recover only critical volumes and later restore other volumes that were backed up in separate sessions. 58 The proposed backup solution shall also support granular recovery for VMware, Exchange server, Share point Portal 59 Backup Software should support minimum 100 No s client licenses. 60 The backup software should support Non Staged Granular recovery in VMWare 61 7 (3+2+2) years Onsite Warranty l) Rack: Specifications for Black color Server Rack with Wheels 3 No s (DC: 2 Nos. and DR: 1 Nos.) U Black Color Server Rack Front, back and Side door s Two side PDU s with 6/16 AMP socket s that can accommodate fully populated rack, PDU should have power utilization display inch sliding TFT Color Monitor (rack mounted monitor with required cables, keyboard, mouse and touch pad) port IP based KVM Switch along with required cables No s of KVM to server connectivity cables 05 5 Meter AMP Make 10G factory crimped UTP patch card s 20 No s. 10 Meter AMP Make 10G factory crimped UTP patch card's Nos (3+2+2)years Onsite Warranty m) Rack: Specifications for Black color Storage and Tape Library Rack with Wheels 1 No s (DC: 1 No.) U Black Color Server Rack Front, back and Side door s Two side PDU s with 6/16 AMP socket s that can accommodate fully populated rack PDU should have power utilization display 02 7 (3+2+2) years Onsite Warranty Page 12 of 38