Series SD. Series Switch Type 2 Feature 3 Line Voltage 1 Output Current - Amps. Dual Output to 50A 600 Vac DC Control Solid-State Relay

Transcription

1 Dual Output to 5A Vac FEATURES/BENEFITS The Series SD dual-phase relays are designed for all types of loads. The design incorporates two relays in a single package. The relays utilize optical isolation to protect the control from load transients. High-current models are excellent for motor and phase angle control. The 5A Vac models are available with common control connector or individual control connector. Applications include motor control, heating control, uninterruptible power supplies, light dimmers, industrial and process control, and on/off controls of AC equipment. UL recognized. UL File Number: E5555. Designed for all types of loads Dual (two relays in one package) Faston terminals Connector for common or individual control Tight zero-cross window for low EMI High immunity to surges Part Number Description SDR5- - Vac SDR5 - Vac SDD- - Vac SDR- - Vac SDD5- - Vac SDD- -5 Vac SDD5A - Vac SDD5A - Vac Part Number Explanation SD R 5 - Series Switch Type Feature 3 Line Voltage Output Current - Amps NOTES ) Line Voltage (nominal): = Vac; = Vac ) Switch Type: R = Random turn-on; D = Zero-cross turn-on; 3) Features: - = Faston terminals A = Common control adapter A = Individual control adapter INPUT (CONTROL) SPECIFICATION Min Max Units Control Range SD 3 Vdc SDD- 5 3 Vdc SDD5XX 3 Vdc Input Current Range All relays (See Fig. a) 3 ma Must Turn-Off Voltage All relays Vdc Input Resistance (Typical) SD Ohms SDD- Ohms SDD5A Ohms SDD5A Ohms Reverse Voltage Protection All relays 3 V BLOCK DIAGRAM Figure a All SD relays except SDD- Figure b SDD- TELEDYNE RELAYS () SD SD\\Q

2 Dual Output to 5A Vac MECHANICAL SPECIFICATION.5x.3 (.3x.). (3).9 (9.) Ø.9 (.7). (7). (.). () Ø.9 (.7) M. (35.). (.).3 (7.). (.57).39 () WEIGHT: 3. oz. (g) Figure a SDR5-, and SDD5-; dimensions in inches (mm). (5.).7 (7.). (5).7 (.5) I.3 (7.75) I.3 (7.).3 ().39 () WEIGHT: 3. oz. (g). (5.).7 (7.) Figure b SDR5; dimensions in inches (mm). (5). (3) Ø.9 (.7). ().5 (.3). (7). (.). () Ø.9 (.7) M. (7). (.).x. (.x.). (3) TOLERANCES: ±. WEIGHT: 3. oz. (g). (7). (.). (5).3 ().5 (.7).35 (.) ~ ~ - 3. (5.) Figure c SDD-, SDD- and SDR-; dimensions in inches (mm). () Ø.9 (.7) M. (7). (.).7 (7.). (5.). (.).7 (.5).3 (7.75) = = 5A Vac (-Vac) Input -3 Vdc.3 () max WEIGHT: 3. oz. (g).3 () max 5A Vac (-Vac). (5.).7 (7.). (5) Figure d SDD5A; dimensions in inches (mm) 3 phases up to Vac L L L 3 TYPICAL APPLICATION. (.) Y wiring. (.).3 (7.75).7 (.5) = = 5A Vac (-Vac) Input -3 Vdc 5A Vac (-Vac). (5). (.).3 () max WEIGHT: 3. oz. (g).3 () max Figure e SDD5A; dimensions in inches (mm). (5.).7 (7.) Δ wiring single phase Figure 3 SDD5A SD SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE TELEDYNE RELAYS SD\\Q

3 Dual Output to 5A Vac OUTPUT (LOAD) SPECIFICATION Input Type Min Max Units Input Type Min Max Units Operating Range Off-State dv/dt All relays 5 V/μs SD R/D Vrms SDD- 5 Vrms SDD5XX Vrms Maximum di/dt () All relays 5 A/μs Peak Voltage SD Vpeak Operating Frequency Range All relays Hz SD Vpeak I t for Match Fusing (<.3ms) Load Current Range (Resistive) SDD-, SDR- & SDD-.5 Arms SDD-, SDR- & SDD- A S All other relays 5 A S All other relays.5 5 Arms Maximum Surge Current Rating () SDD-, SDR-, & SDD- 35 A All other relays 55 A On-State Voltage Drop All relays current. V Zero-Cross Window SD R NA SD D/A ± Vac Off-State Leakage Current (Hz) SDD-.5 ma All other relays ma Turn-On Time ( Hz) SD R. ms All other relays.3 ms Turn-Off Time ( Hz) Input Currrent (ma) 3 CONTROL CHARACTERISTICS 3 Figure a SD and SDD- relays Input Current (ma) Figure b SDD5A relay All relays.3 ms SDR- ms OUTPUT (LOAD) SPECIFICATION (Continued) TELEDYNE RELAYS () SD 3 SD\\Q

4 Dual Output to 5A Vac ENVIRONMENTAL SPECIFICATION Min Max Units Operating Temperature C Storage Temperature C Repetitive with initial Tj = 7 C SURGE CURRENT Input-Output Isolation SDD-, SDR- & SDD- Vrms All other relays 33 Vrms Output-Case Isolation SDD-, SDR- & SDD- 5 Vrms All other relays 33 Vrms Output to Output SDD5XX 33 Vrms All other relays 5 Vrms Junction-Case Thermal Resistance SDD-, SDR- & SDD-. C/W All other relays.5 C/W 3... Figure 5a SD 5A current Repetitive with initial Tj = 7 C. Figure 5b SD A and SD A current. Repetitive with initial Tj = 7 C. Figure 5c SD 5A current Input Current (ma) 5 3 For each Figure c SDD5A relay NOTES:. Electrical specifications at 5 C unless otherwise specified.. For Hz applications, contact factory. 3. For additional/custom applications, contact factory. SD SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE TELEDYNE RELAYS SD\\Q

5 Dual Output to 5A Vac THERMAL CHARACTERISTICS pole pole.9 C/W. C/W.35 C/W. C/W C/W. C/W C/W.75 C/W Without heat sink.55 C/W Load Current (Arms) Ambient Temperature ( C). C/W Figure a SD 5A relays current. C/W C/W 9 C Max Case Temperature ( C) 55 C/W.9 C/W.75 C/W.55 C/W.3 C/W. C/W C/W 5 5 pole. C/W.35 C/W. C/W pole C/W.3 C/W. C/W C/W Load Current (Arms) Without heat sink Ambient Temperature ( C) Figure b SD A and SD A current.3 C/W pole pole.75 C/W.95 C/W. C/W. C/W C/W OPTIONAL ADD-ONS Please order add-ons separately: - Thermal pad installed. - Plastic touch-proof cover Load Current (Arms) Ambient Temperature ( C) Figure c SDD5A and SDD5A current TELEDYNE RELAYS () SD 5 SD\\Q