must Operate Voltage (V)

Size: px

Start display at page:

Download "must Operate Voltage (V)"

Beverly Jocelyn Cameron
6 years ago
Views:

force-guided relays g7sa G7SA compact, Slim relays conforming to en Standards Relays with forcibly guided contacts (EN50205 Class A, certifi ed by VDE) Supports the CE marking of machinery (Machinery

Reinforced insulation between inputs and outputs. Reinforced insulation between some poles of different polarity. Rev. 9.

1 force-guided relays g7sa G7SA compact, Slim relays conforming to en Standards Relays with forcibly guided contacts (EN50205 Class A, certifi ed by VDE) Supports the CE marking of machinery (Machinery Directive) elps avoid hazardous machine status when used as part of an interlocking circuit Four-pole and six-pole Relays are available The relay s terminal arrangement simplifi es PWB pattern design Reinforced insulation between inputs and outputs. Reinforced insulation between some poles of different polarity. Rev Specifications ratings coil h rated Voltage rated current (ma) coil resistance (Ω) must Operate must release max. Power consumption (mw) : 5 6 poles: 20.8 :,600 6 poles:,52 75% max. 0% min. 0% : Approx poles: Approx The rated current and coil resistance are measured at a coil temperature of 23 C with tolerances of ±5%. 2. Performance characteristics are based on a coil temperature of 23 C. 3. The maximum voltage is based on an ambient operating temperature of 23 C maximum. contacts Rated load Rated carry current Max. switching voltage Max. switching current resistive load 6 A at 250 VAC, 6 A at 30 VDC 6 A 250 VAC, 25 VDC 6 A certified Standards EN Standards, VDE Certifi ed EN680- (Electromechanical non-specifi ed time all-or-nothing relays) EN50205 (Relays with forcibly guided (linked) contacts) UL standard UL508 Industrial Control Devices CSA standard CSA C.2 No. 4 Industrial Control Devices forcibly-guided contacts (from en50205) If an NO contact becomes welded, all NC contacts will maintain a minimum distance of mm when the coil is not energized. Likewise if an NC contact becomes welded, all NO contacts will maintain a minimum distance of mm when the coil is energized. characteristics of Sockets model continuous current Dielectric Strength insulation resistance P7SA- 6 A * 2,500 VAC for min. between poles,000 MΩ min. *2 Use the P7SA- F-ND in the ambient temperature range of -20 to 70 C. Use the P7SA- F and P7SA- F-ND in the ambient humidity range of 45 to 85%. *. When operating the P7SA- F at a temperature between 55 and 85 C, reduce the continuous current (6 A at 55 C or less) by 0. A for each degree above 55 C. When operating the P7SA- F-ND at a temperature between 50 and 70 C, reduce the continuous current (6 A at 50 C or less) by 0.3 A for each degree above 50 C. *2. Measurement conditions: Measurement of the same points as for the dielectric strength at 500 VDC. OmrOn Scientific technologies, inc. USA Tel. /888/50-57 canada Tel. /866/ h3

Engineering Data Durability Curve No. of operations ( 0 4 operations),000 700 500 300 00 70 50 30 0 7 5 3 DC3, AC5, 240 VAC DC, AC, 240 VAC 0. 0.3 0.

. Terminals 23-24, 33-34, and - open. Terminals -2 and 2-2. The colors of the cards inside the Relays are as follows: G7SA- 3AB: Blue and : White.

2 Engineering Data Durability Curve No. of operations ( 0 4 operations), DC3, AC5, 240 VAC DC, AC, 240 VAC Contact current (A) Dimensions G7SA-3AB 40 max. 3 max. Terminal Arrangement/ Internal Connection Diagram G7SA-3AB Printed Circuit Board Design Diagram (±0. tolerance) Ten,.4 dia. 24 max.. Terminals 23-24, 33-34, and - open. Terminals -2 and 2-2. The colors of the cards inside the Relays are as follows: G7SA- 3AB: Blue and : White. G7SA-5AB Terminal Arrangement/ Internal Connection Diagram G7SA-5AB Printed Circuit Board Design Diagram (±0. tolerance) Fourteen,.4 dia. 50 max. 3 max. 24 max.. Terminals 23-24, 33-34, -, -54, and -64 open. Terminals -2, 2-, and The colors of the cards inside the Relays are as follows: G7SA- 5AB: Blue, : White, and : Yellow. 4 USA Tel. /888/50-57 Canada Tel. /866/

3 Dimensions (continued) Track-mounting Socket P7SA-0F, P7SA-0F-ND Terminal Arrangement/Internal Connection Diagram G7SA-3AB * * R.5 max. Ten, M3 8 6 max. 0 0 Mounting ole Placement Diagram Two, 4 dia. or M * This display circuit is available only for "-ND" models. Note: Terminals 23-24, 33-34, and - open. Terminals -2 and 2-72 max. indicator 4 dia. Note : The socket is shown with the finger cover removed. 2: Only the -ND Sockets have indicators (orange) Track-mounting Socket P7SA-4F, P7SA-4F-ND Terminal Arrangement/Internal Connection Diagram G7SA-5AB * * * R 30 max. Fourteen, M3 8 6 max max. indicator Mounting ole Placement Diagram Two, 4 dia. or M * This display circuit is available only for "-ND" models. Note: Terminals 23-24, 33-34, -, -54, and -64 open. Terminals -2, 2-, and dia. Note : The socket is shown with the finger cover removed. 2: Only the -ND Sockets have indicators (orange). USA Tel. /888/50-57 Canada Tel. /866/

Dimensions (continued) Back-mounting Socket (for PCB) P7SA-0P 50 max. 5 max.

2 dia. 0 2 33 34 (.) 0.4 (.) Ten,. dia. Three, 2.6 dia. 2 4. 24.8 39.9 Note: Terminals 23-24, 33-34, and - open.

Terminal Arrangement/Internal Connection Diagram Mounting ole Placement (±0. tolerance) 5 max.

4 Dimensions (continued) Back-mounting Socket (for PCB) P7SA-0P 50 max. 5 max. Terminal Arrangement/Internal Connection Diagram Mounting ole Placement (±0. tolerance) G7SA-3AB max Three, 3.2 dia (.) 0.4 (.) Ten,. dia. Three, 2.6 dia Note: Terminals 23-24, 33-34, and - open. Terminals -2 and 2- Back-mounting Socket (for PCB) P7SA-4P 60 max. Terminal Arrangement/Internal Connection Diagram Mounting ole Placement (±0. tolerance) 5 max. 4.5 max. G7SA-5AB Fourteen,. dia. Three, 3.2 dia. (for M3 tapping screws) (.) 0.4 (.) Three, 2.6 dia Note: Terminals 23-24, 33-34, -, -54, and -64 open. Terminals -2, 2-, and USA Tel. /888/50-57 Canada Tel. /866/

5 Ordering Model Number Legend G7SA A B 2 NO Contact Poles 2: DPST-NO 3: 3PST-NO 4: 4PST-NO 5: 5PST-NO 2 NC Contact Poles : SPST-NC 2: DPST-NC 3: 3PST-NC Relays with Forcibly Guided Contacts Type Sealing Poles Contact Configuration Rated Voltage* Model 3PST-NO, SPST-NC G7SA-3AB DPST-NO, DPST-NC Standard Flux-tight 5PST-NO, SPST-NC G7SA-5AB 6 poles 4PST-NO, DPST-NC 3PST-NO, 3PST-NC *Consult your Omron STI representative for details on rated voltages of 2 VDC, 8 VDC, 2 VDC and 48 VDC. Sockets Type Indicator Poles Rated Voltage Model P7SA-0F No poles P7SA-4F Track-mounting Track mounting and screw mounting possible P7SA-0F-ND Yes 6 poles P7SA-4F-ND P7SA-0P Back-mounting PCB terminals No poles P7SA-4P Relays with Forcibly Guided Contacts and Track Mounting Sockets (assemblies) Poles Relay Specifications Contact Configuration Rated Coil Voltage Type Socket Specifications Indicator Rated Voltage Assembly Model DPST-NO, DPST-NC Track Mounting and screw mounting possible No FGRMS-24 3PST-NO, SPST-NC Track Mounting and screw mounting possible No FGRM-S poles 3PST-NO, 3PST-NC Track Mounting and screw mounting possible No FGRM-S poles 4PST-NO, 2PST-NC Track Mounting and screw mounting possible No FGRM-S poles 5PST-NO, SPST-NC Track Mounting and screw mounting possible No FGRM-S5-24 DPST-NO, DPST-NC Track Mounting and screw mounting possible Yes FGRMS-24-3PST-NO, SPST-NC Track Mounting and screw mounting possible Yes FGRM-S poles 3PST-NO, 3PST-NC Track Mounting and screw mounting possible Yes FGRM-S poles 4PST-NO, 2PST-NC Track Mounting and screw mounting possible Yes FGRM-S poles 5PST-NO, SPST-NC Track Mounting and screw mounting possible Yes FGRM-S5-24- = ighlighted Rapid Delivery products are available for shipment today or within FIVE days. USA Tel. /888/50-57 Canada Tel. /866/

SPST-NO SPDT DPST-NO DPDT

SPST-NO SPDT DPST-NO DPDT Next-generation PCB Relay Available in Various Models ROHS compliant. High sensitivity: (250mW) and high capacity (16A) models available Low profile: 15.7 mm max. in height. Conforms to EN 61810-1, UL508